netintro (4)

Leading comments

 Copyright (c) 1983, 1990, 1991, 1993
	The Regents of the University of California.  All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
 are met:
 1. Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and t...

NAME

SYNOPSIS

DESCRIPTION

All network protocols are associated with a specific protocol family A protocol family provides basic services to the protocol implementation to allow it to function within a specific network environment. These services may include packet fragmentation and reassembly, routing, addressing, and basic transport. A protocol family may support multiple methods of addressing, though the current protocol implementations do not. A protocol family is normally comprised of a number of protocols, one per socket(2) type. It is not required that a protocol family support all socket types. A protocol family may contain multiple protocols supporting the same socket abstraction.

A protocol supports one of the socket abstractions detailed in socket(2). A specific protocol may be accessed either by creating a socket of the appropriate type and protocol family, or by requesting the protocol explicitly when creating a socket. Protocols normally accept only one type of address format, usually determined by the addressing structure inherent in the design of the protocol family/network architecture. Certain semantics of the basic socket abstractions are protocol specific. All protocols are expected to support the basic model for their particular socket type, but may, in addition, provide non-standard facilities or extensions to a mechanism. For example, a protocol supporting the SOCK_STREAM abstraction may allow more than one byte of out-of-band data to be transmitted per out-of-band message.

A network interface is similar to a device interface. Network interfaces comprise the lowest layer of the networking subsystem, interacting with the actual transport hardware. An interface may support one or more protocol families and/or address formats. The SYNOPSIS section of each network interface entry gives a sample specification of the related drivers for use in providing a system description to the config(8) program. The DIAGNOSTICS section lists messages which may appear on the console and/or in the system error log, /var/log/messages (see syslogd(8)), due to errors in device operation.

PROTOCOLS

ADDRESSING

struct sockaddr {
    u_char      sa_len;
    u_char      sa_family;
    char        sa_data[14];
};

The field sa_len contains the total length of the structure, which may exceed 16 bytes. The following address values for sa_family are known to the system (and additional formats are defined for possible future implementation):

#define    AF_UNIX      1    /* local to host (pipes, portals) */
#define    AF_INET      2    /* internetwork: UDP, TCP, etc. */
#define    AF_NS        6    /* Xerox NS protocols */
#define    AF_CCITT     10   /* CCITT protocols, X.25 etc */
#define    AF_HYLINK    15   /* NSC Hyperchannel */
#define    AF_ISO       18   /* ISO protocols */

ROUTING

A user process (or possibly multiple co-operating processes) maintains this database by sending messages over a special kind of socket. This supplants fixed size ioctl(2) used in earlier releases.

This facility is described in route(4).

INTERFACES

The following ioctl(2) calls may be used to manipulate network interfaces. The Fn ioctl is made on a socket (typically of type SOCK_DGRAM in the desired domain. Most of the requests supported in earlier releases take an Vt ifreq structure as its parameter. This structure has the form

struct  ifreq {
#define    IFNAMSIZ    16
    char    ifr_name[IFNAMSIZ];        /* if name, e.g. "en0" */
    union {
        struct    sockaddr ifru_addr;
        struct    sockaddr ifru_dstaddr;
        struct    sockaddr ifru_broadaddr;
        struct    ifreq_buffer ifru_buffer;
        short     ifru_flags[2];
        short     ifru_index;
        int       ifru_metric;
        int       ifru_mtu;
        int       ifru_phys;
        int       ifru_media;
        caddr_t   ifru_data;
        int       ifru_cap[2];
    } ifr_ifru;
#define ifr_addr      ifr_ifru.ifru_addr      /* address */
#define ifr_dstaddr   ifr_ifru.ifru_dstaddr   /* other end of p-to-p link */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_buffer    ifr_ifru.ifru_buffer    /* user supplied buffer with its length */
#define ifr_flags     ifr_ifru.ifru_flags[0]  /* flags (low 16 bits) */
#define ifr_flagshigh ifr_ifru.ifru_flags[1]  /* flags (high 16 bits) */
#define ifr_metric    ifr_ifru.ifru_metric    /* metric */
#define ifr_mtu       ifr_ifru.ifru_mtu       /* mtu */
#define ifr_phys      ifr_ifru.ifru_phys      /* physical wire */
#define ifr_media     ifr_ifru.ifru_media     /* physical media */
#define ifr_data      ifr_ifru.ifru_data      /* for use by interface */
#define ifr_reqcap    ifr_ifru.ifru_cap[0]    /* requested capabilities */
#define ifr_curcap    ifr_ifru.ifru_cap[1]    /* current capabilities */
#define ifr_index     ifr_ifru.ifru_index     /* interface index */
};

Fn Ioctl requests to obtain addresses and requests both to set and retrieve other data are still fully supported and use the Vt ifreq structure:

SIOCGIFADDR

Get interface address for protocol family.

SIOCGIFDSTADDR

Get point to point address for protocol family and interface.

SIOCGIFBRDADDR

Get broadcast address for protocol family and interface.

SIOCSIFCAP

Attempt to set the enabled capabilities field for the interface to the value of the ifr_reqcap field of the Vt ifreq structure. Note that, depending on the particular interface features, some capabilities may appear hard-coded to enabled, or toggling a capability may affect the status of other ones. The supported capabilities field is read-only, and the ifr_curcap field is unused by this call.

SIOCGIFCAP

Get the interface capabilities fields. The values for supported and enabled capabilities will be returned in the ifr_reqcap and ifr_curcap fields of the Vt ifreq structure, respectively.

SIOCGIFDESCR

Get the interface description, returned in the buffer field of ifru_buffer struct. The user supplied buffer length should be defined in the length field of ifru_buffer struct passed in as parameter, and the length would include the terminating nul character. If there is not enough space to hold the interface length, no copy would be done and the buffer field of ifru_buffer would be set to NULL. The kernel will store the buffer length in the length field upon return, regardless whether the buffer itself is sufficient to hold the data.

SIOCSIFDESCR

Set the interface description to the value of the buffer field of ifru_buffer struct, with length field specifying its length (counting the terminating nul).

SIOCSIFFLAGS

Set interface flags field. If the interface is marked down, any processes currently routing packets through the interface are notified; some interfaces may be reset so that incoming packets are no longer received. When marked up again, the interface is reinitialized.

SIOCGIFFLAGS

Get interface flags.

SIOCSIFMETRIC

Set interface routing metric. The metric is used only by user-level routers.

SIOCGIFMETRIC

Get interface metric.

SIOCIFCREATE

Attempt to create the specified interface. If the interface name is given without a unit number the system will attempt to create a new interface with an arbitrary unit number. On successful return the ifr_name field will contain the new interface name.

SIOCIFDESTROY

Attempt to destroy the specified interface.

There are two requests that make use of a new structure:

SIOCAIFADDR

An interface may have more than one address associated with it in some protocols. This request provides a means to add additional addresses (or modify characteristics of the primary address if the default address for the address family is specified). Rather than making separate calls to set destination or broadcast addresses, or network masks (now an integral feature of multiple protocols) a separate structure is used to specify all three facets simultaneously (see below). One would use a slightly tailored version of this struct specific to each family (replacing each sockaddr by one of the family-specific type). Where the sockaddr itself is larger than the default size, one needs to modify the Fn ioctl identifier itself to include the total size, as described in Fn ioctl .

SIOCDIFADDR

This requests deletes the specified address from the list associated with an interface. It also uses the Vt ifaliasreq structure to allow for the possibility of protocols allowing multiple masks or destination addresses, and also adopts the convention that specification of the default address means to delete the first address for the interface belonging to the address family in which the original socket was opened.

SIOCGIFCONF

Get interface configuration list. This request takes an Vt ifconf structure (see below) as a value-result parameter. The ifc_len field should be initially set to the size of the buffer pointed to by ifc_buf On return it will contain the length, in bytes, of the configuration list.

SIOCIFGCLONERS

Get list of clonable interfaces. This request takes an Vt if_clonereq structure (see below) as a value-result parameter. The ifcr_count field should be set to the number of IFNAMSIZ sized strings that can be fit in the buffer pointed to by ifcr_buffer On return, ifcr_total will be set to the number of clonable interfaces and the buffer pointed to by ifcr_buffer will be filled with the names of clonable interfaces aligned on IFNAMSIZ boundaries.

/*
* Structure used in SIOCAIFADDR request.
*/
struct ifaliasreq {
        char    ifra_name[IFNAMSIZ];   /* if name, e.g. "en0" */
        struct  sockaddr        ifra_addr;
        struct  sockaddr        ifra_broadaddr;
        struct  sockaddr        ifra_mask;
};

/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
struct ifconf {
    int   ifc_len;              /* size of associated buffer */
    union {
        caddr_t    ifcu_buf;
        struct     ifreq *ifcu_req;
    } ifc_ifcu;
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures returned */
};

/* Structure used in SIOCIFGCLONERS request. */
struct if_clonereq {
        int     ifcr_total;     /* total cloners (out) */
        int     ifcr_count;     /* room for this many in user buffer */
        char    *ifcr_buffer;   /* buffer for cloner names */
};

/* Structure used in SIOCGIFDESCR and SIOCSIFDESCR requests */
struct ifreq_buffer {
        size_t  length;         /* length of the buffer */
        void   *buffer;         /* pointer to userland space buffer */
};

SEE ALSO

HISTORY