Copyright (c) 2009 Marius Strobl <marius@FreeBSD.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the docu...
NAMEcas - Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn Gigabit Ethernet driver
SYNOPSISTo compile this driver into the kernel, place the following lines in your kernel configuration file:
device miibus device cas
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:
DESCRIPTIONThe driver provides support for the Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn Gigabit Ethernet controllers found on-board in Sun UltraSPARC machines and as add-on cards.
All controllers supported by the driver have TCP/UDP checksum offload capability for both receive and transmit, support for the reception and transmission of extended frames for vlan(4) and an interrupt coalescing/moderation mechanism as well as a 512-bit multicast hash filter.
The driver also supports Jumbo Frames (up to 9022 bytes), which can be configured via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames.
HARDWAREThe chips supported by the driver are:
- National Semiconductor DP83065 Saturn Gigabit Ethernet
- Sun Cassini Gigabit Ethernet
- Sun Cassini+ Gigabit Ethernet
The following add-on cards are known to work with the driver at this time:
- Sun GigaSwift Ethernet 1.0 MMF (Cassini Kuheen) (part no. 501-5524)
- Sun GigaSwift Ethernet 1.0 UTP (Cassini) (part no. 501-5902)
- Sun GigaSwift Ethernet UTP (GCS) (part no. 501-6719)
- Sun Quad GigaSwift Ethernet UTP (QGE) (part no. 501-6522)
- Sun Quad GigaSwift Ethernet PCI-X (QGE-X) (part no. 501-6738)
NOTESOn sparc64 the driver respects the local-mac-address? system configuration variable which can be set in the Open Firmware boot monitor using the setenv command or by eeprom(8). If set to ``false '' (the default), the driver will use the system's default MAC address for all of its devices. If set to ``true '' the unique MAC address of each interface is used if present rather than the system's default MAC address.
Supported interfaces having their own MAC address include on-board versions on boards equipped with more than one Ethernet interface and all add-on cards.