if_nxge (4)

Leading comments

Copyright (c) 2007, Neterion Inc
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer as
   the first lines of this file unmodified.
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following ...

(The comments found at the beginning of the groff file "man4/if_nxge.4freebsd".)

NAME

nxge - Neterion Xframe 10GbE Server/Storage adapter driver

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:

device nxge

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

if_nxge_load="YES"

DESCRIPTION

The ifconfig driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP Segmentation Offload (TSO/LSO), Large Receive Offload (LRO), Jumbo Frames (5 buffer mode), Header Separation (Rx 2 buffer mode), VLAN, and Promiscuous mode.

For general information and support, please visit the Neterion support page www.neterion.com/support/support.html

Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to transmit and receive Jumbo Frames. Xframe adapters support Jumbo Frames up to 9600 bytes.

For Jumbo Frames, the driver will try to allocate physically contiguous buffers. Failures to do so may degrade the performance. To resolve such problems, please visit www.neterion.com where additional information and a kernel patch can be found.

For more information on configuring this device, see ifconfig(8).

HARDWARE

The ifconfig driver supports Neterion Xframe 10 Gigabit Ethernet adapters listed in www.neterion.com/how/pricing.html

SUPPORT

For troubleshooting tips and FAQs, please visit trac.neterion.com/cgi-bin/trac.cgi/wiki/TitleIndex?anonymous

For any issues please send an email to Aq support@neterion.com .

SEE ALSO

arp(4), netintro(4), ifconfig(8)

HISTORY

The ifconfig device driver first appeared in Fx 7.0 .

AUTHORS

The ifconfig driver was written by An Neterion Aq support@neterion.com .