if_ixgb (4)

Leading comments

Copyright (c) 2001-2004, Intel Corporation
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation...

(The comments found at the beginning of the groff file "man4/if_ixgb.4freebsd".)

NAME

ixgb - Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:

device ixgb

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

if_ixgb_load="YES"

DESCRIPTION

The ifconfig driver provides support for PCI Gigabit Ethernet adapters based on the Intel 82597EX Ethernet controller chips. The driver supports Transmit/Receive checksum offload and Jumbo Frames.

For questions related to hardware requirements, refer to the documentation supplied with your Intel PRO/10GbE adapter. All hardware requirements listed apply to use with Fx .

Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames. The maximum MTU size for Jumbo Frames is 16114.

This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8).

HARDWARE

The ifconfig driver supports the following cards:

• Intel PRO/10GbE LR Server Adapter
• Intel PRO/10GbE SR Server Adapter

DIAGNOSTICS

"ixgb%d: Unable to allocate bus resource: memory"

A fatal initialization error has occurred.

"ixgb%d: Unable to allocate bus resource: interrupt"

A fatal initialization error has occurred.

"ixgb%d: watchdog timeout -- resetting"

The device has stopped responding to the network, or there is a problem with the network connection (cable).

SUPPORT

For general information and support, go to the Intel support website at: support.intel.com

If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to Aq freebsd@intel.com .

SEE ALSO

arp(4), em(4), netintro(4), ng_ether4, polling(4), vlan(4), ifconfig(8)

HISTORY

The ifconfig device driver first appeared in Fx 4.11 and Fx 5.3 .

AUTHORS

The ifconfig driver was written by An Intel Corporation Aq freebsd@intel.com .