locking (9)
Leading comments
Copyright (c) 2007 Julian Elischer (julian - freebsd org ) All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the ...
NAME
locking - kernel synchronization primitivesDESCRIPTION
The FreeBSD kernel is written to run across multiple CPUs and as such provides several different synchronization primitives to allow developers to safely access and manipulate many data types.Mutexes
Mutexes (also called "blocking mutexes") are the most commonly used synchronization primitive in the kernel. A thread acquires (locks) a mutex before accessing data shared with other threads (including interrupt threads), and releases (unlocks) it afterwards. If the mutex cannot be acquired, the thread requesting it will wait. Mutexes are adaptive by default, meaning that if the owner of a contended mutex is currently running on another CPU, then a thread attempting to acquire the mutex will spin rather than yielding the processor. Mutexes fully support priority propagation.See mutex(9) for details.
Spin Mutexes
Spin mutexes are a variation of basic mutexes; the main difference between the two is that spin mutexes never block. Instead, they spin while waiting for the lock to be released. To avoid deadlock, a thread that holds a spin mutex must never yield its CPU. Unlike ordinary mutexes, spin mutexes disable interrupts when acquired. Since disabling interrupts can be expensive, they are generally slower to acquire and release. Spin mutexes should be used only when absolutely necessary, e.g. to protect data shared with interrupt filter code (see bus_setup_intr9 for details), or for scheduler internals.Mutex Pools
With most synchronization primitives, such as mutexes, the programmer must provide memory to hold the primitive. For example, a mutex may be embedded inside the structure it protects. Mutex pools provide a preallocated set of mutexes to avoid this requirement. Note that mutexes from a pool may only be used as leaf locks.See mtx_pool9 for details.
Reader/Writer Locks
Reader/writer locks allow shared access to protected data by multiple threads or exclusive access by a single thread. The threads with shared access are known as readers since they should only read the protected data. A thread with exclusive access is known as a writer since it may modify protected data.Reader/writer locks can be treated as mutexes (see above and mutex(9)) with shared/exclusive semantics. Reader/writer locks support priority propagation like mutexes, but priority is propagated only to an exclusive holder. This limitation comes from the fact that shared owners are anonymous.
See rwlock(9) for details.
Read-Mostly Locks
Read-mostly locks are similar to reader/writer locks but optimized for very infrequent write locking. Read-mostly locks implement full priority propagation by tracking shared owners using a caller-supplied tracker data structure.See rmlock(9) for details.
Sleepable Read-Mostly Locks
Sleepable read-mostly locks are a variation on read-mostly locks. Threads holding an exclusive lock may sleep, but threads holding a shared lock may not. Priority is propagated to shared owners but not to exclusive owners.Shared/exclusive locks
Shared/exclusive locks are similar to reader/writer locks; the main difference between them is that shared/exclusive locks may be held during unbounded sleep. Acquiring a contested shared/exclusive lock can perform an unbounded sleep. These locks do not support priority propagation.See sx(9) for details.
Lockmanager locks
Lockmanager locks are sleepable shared/exclusive locks used mostly in VFS(9) Po as a vnode(9) lock Pc and in the buffer cache Po BUF_LOCK9 Pc . They have features other lock types do not have such as sleep timeouts, blocking upgrades, writer starvation avoidance, draining, and an interlock mutex, but this makes them complicated both to use and to implement; for this reason, they should be avoided.See lock(9) for details.
Counting semaphores
Counting semaphores provide a mechanism for synchronizing access to a pool of resources. Unlike mutexes, semaphores do not have the concept of an owner, so they can be useful in situations where one thread needs to acquire a resource, and another thread needs to release it. They are largely deprecated.See sema(9) for details.
Condition variables
Condition variables are used in conjunction with locks to wait for a condition to become true. A thread must hold the associated lock before calling one of the Fn cv_wait , functions. When a thread waits on a condition, the lock is atomically released before the thread yields the processor and reacquired before the function call returns. Condition variables may be used with blocking mutexes, reader/writer locks, read-mostly locks, and shared/exclusive locks.See condvar(9) for details.
Sleep/Wakeup
The functions Fn tsleep , Fn msleep , Fn msleep_spin , Fn pause , Fn wakeup , and Fn wakeup_one also handle event-based thread blocking. Unlike condition variables, arbitrary addresses may be used as wait channels and a dedicated structure does not need to be allocated. However, care must be taken to ensure that wait channel addresses are unique to an event. If a thread must wait for an external event, it is put to sleep by Fn tsleep , Fn msleep , Fn msleep_spin , or Fn pause . Threads may also wait using one of the locking primitive sleep routines mtx_sleep9, rw_sleep9, or sx_sleep9.The parameter Fa chan is an arbitrary address that uniquely identifies the event on which the thread is being put to sleep. All threads sleeping on a single Fa chan are woken up later by Fn wakeup (often called from inside an interrupt routine) to indicate that the event the thread was blocking on has occurred.
Several of the sleep functions including Fn msleep , Fn msleep_spin , and the locking primitive sleep routines specify an additional lock parameter. The lock will be released before sleeping and reacquired before the sleep routine returns. If Fa priority includes the PDROP flag, then the lock will not be reacquired before returning. The lock is used to ensure that a condition can be checked atomically, and that the current thread can be suspended without missing a change to the condition or an associated wakeup. In addition, all of the sleep routines will fully drop the Giant mutex (even if recursed) while the thread is suspended and will reacquire the Giant mutex (restoring any recursion) before the function returns.
The Fn pause function is a special sleep function that waits for a specified amount of time to pass before the thread resumes execution. This sleep cannot be terminated early by either an explicit Fn wakeup or a signal.
See sleep(9) for details.
Giant
Giant is a special mutex used to protect data structures that do not yet have their own locks. Since it provides semantics akin to the old spl(9) interface, Giant has special characteristics:- It is recursive.
- Drivers can request that Giant be locked around them by not marking themselves MPSAFE. Note that infrastructure to do this is slowly going away as non-MPSAFE drivers either became properly locked or disappear.
- Giant must be locked before other non-sleepable locks.
- Giant is dropped during unbounded sleeps and reacquired after wakeup.
- There are places in the kernel that drop Giant and pick it back up again. Sleep locks will do this before sleeping. Parts of the network or VM code may do this as well. This means that you cannot count on Giant keeping other code from running if your code sleeps, even if you want it to.
INTERACTIONS
The primitives can interact and have a number of rules regarding how they can and can not be combined. Many of these rules are checked by witness(4).Bounded vs. Unbounded Sleep
In a bounded sleep Po also referred to as ``blocking'' Pc the only resource needed to resume execution of a thread is CPU time for the owner of a lock that the thread is waiting to acquire. In an unbounded sleep Po often referred to as simply ``sleeping'' Pc a thread waits for an external event or for a condition to become true. In particular, a dependency chain of threads in bounded sleeps should always make forward progress, since there is always CPU time available. This requires that no thread in a bounded sleep is waiting for a lock held by a thread in an unbounded sleep. To avoid priority inversions, a thread in a bounded sleep lends its priority to the owner of the lock that it is waiting for.The following primitives perform bounded sleeps: mutexes, reader/writer locks and read-mostly locks.
The following primitives perform unbounded sleeps: sleepable read-mostly locks, shared/exclusive locks, lockmanager locks, counting semaphores, condition variables, and sleep/wakeup.
General Principles
- It is an error to do any operation that could result in yielding the processor while holding a spin mutex.
-
It is an error to do any operation that could result in unbounded sleep
while holding any primitive from the 'bounded sleep' group.
For example, it is an error to try to acquire a shared/exclusive lock while
holding a mutex, or to try to allocate memory with M_WAITOK while holding a
reader/writer lock.
Note that the lock passed to one of the Fn sleep or Fn cv_wait functions is dropped before the thread enters the unbounded sleep and does not violate this rule.
- It is an error to do any operation that could result in yielding of the processor when running inside an interrupt filter.
- It is an error to do any operation that could result in unbounded sleep when running inside an interrupt thread.
Interaction table
The following table shows what you can and can not do while holding one of the locking primitives discussed. Note that ``sleep'' includes Fn sema_wait , Fn sema_timedwait , any of the Fn cv_wait functions, and any of the Fn sleep functions.- You want: Ta spin mtx Ta mutex/rw Ta rmlock Ta sleep rm Ta sx/lk Ta sleep
- You have: Ta -------- Ta -------- Ta ------ Ta -------- Ta ------ Ta ------
- spin mtx Ta ok Ta no Ta no Ta no Ta no Ta no-1
- mutex/rw Ta ok Ta ok Ta ok Ta no Ta no Ta no-1
- rmlock Ta ok Ta ok Ta ok Ta no Ta no Ta no-1
- sleep rm Ta ok Ta ok Ta ok Ta ok-2 Ta ok-2 Ta ok-2/3
- sx Ta ok Ta ok Ta ok Ta ok Ta ok Ta ok-3
- lockmgr Ta ok Ta ok Ta ok Ta ok Ta ok Ta ok
*1 There are calls that atomically release this primitive when going to sleep and reacquire it on wakeup Po Fn mtx_sleep , Fn rw_sleep , Fn msleep_spin , etc. Pc .
*2 These cases are only allowed while holding a write lock on a sleepable read-mostly lock.
*3 Though one can sleep while holding this lock, one can also use a Fn sleep function to atomically release this primitive when going to sleep and reacquire it on wakeup.
Note that non-blocking try operations on locks are always permitted.
Context mode table
The next table shows what can be used in different contexts. At this time this is a rather easy to remember table.- Context: Ta spin mtx Ta mutex/rw Ta rmlock Ta sleep rm Ta sx/lk Ta sleep
- interrupt filter: Ta ok Ta no Ta no Ta no Ta no Ta no
- interrupt thread: Ta ok Ta ok Ta ok Ta no Ta no Ta no
- callout: Ta ok Ta ok Ta ok Ta no Ta no Ta no
- system call: Ta ok Ta ok Ta ok Ta ok Ta ok Ta ok