daemon.conf (5)
Leading comments
Automatically generated by Pod::Man 2.22 (Pod::Simple 3.07) Standard preamble: ========================================================================
NAME
daemon - turns other processes into daemonsSYNOPSIS
usage: daemon [options] [--] [cmd arg...] options: -h, --help - Print a help message then exit -V, --version - Print a version message then exit -v, --verbose[=level] - Set the verbosity level -d, --debug[=level] - Set the debugging level -C, --config=path - Specify the system configuration file -N, --noconfig - Bypass the system configuration file -n, --name=name - Guarantee a single named instance -X, --command=cmd - Specify the client command as an option -P, --pidfiles=/dir - Override standard pidfile location -F, --pidfile=/path - Override standard pidfile name and location -u, --user=user[:[group]] - Run the client as user[:group] -R, --chroot=path - Run the client with path as root -D, --chdir=path - Run the client in directory path -m, --umask=umask - Run the client with the given umask -e, --env="var=val" - Set a client environment variable -i, --inherit - Inherit environment variables -U, --unsafe - Allow execution of unsafe executable -S, --safe - Deny execution of unsafe executable -c, --core - Allow core file generation -r, --respawn - Respawn the client when it terminates -a, --acceptable=# - Minimum acceptable client duration (seconds) -A, --attempts=# - Respawn # times on error before delay -L, --delay=# - Delay between spawn attempt bursts (seconds) -M, --limit=# - Maximum number of spawn attempt bursts --idiot - Idiot mode (trust root with the above) -f, --foreground - Run the client in the foreground -p, --pty[=noecho] - Allocate a pseudo terminal for the client -l, --errlog=spec - Send daemon's error output to syslog or file -b, --dbglog=spec - Send daemon's debug output to syslog or file -o, --output=spec - Send client's output to syslog or file -O, --stdout=spec - Send client's stdout to syslog or file -E, --stderr=spec - Send client's stderr to syslog or file --running - Check if a named daemon is running --restart - Restart a named daemon client --stop - Terminate a named daemon process
DESCRIPTION
daemon(1) turns other processes into daemons. There are many tasks that need to be performed to correctly set up a daemon process. This can be tedious. daemon performs these tasks for other processes.The preparatory tasks that daemon performs for other processes are:
- *
- First revoke any setuid or setgid privileges that daemon may have been installed with (by system administrators who laugh in the face of danger).
- *
- Process command line options.
- *
-
Change the root directory if the
--chroot
option was supplied. - *
-
Change the process uid and gid if the
--user
option was supplied. Only root can use this option. Note that the uid of daemon itself is changed, rather than just changing the uid of the client process. - *
-
Read the system configuration file (
/etc/daemon.conf
by default, or specified by the --config
option) unless the --noconfig
option was supplied. Then read the user's configuration file ( ~/.daemonrc
), if any. Generic options are processed first, then options specific to the daemon with the given name. Note: The root directory and the user must be set before access to the configuration file can be attempted so neither --chroot
nor --user
options may appear in the configuration file. - *
-
Disable core file generation to prevent leaking sensitive information in
daemons run by root (unless the
--core
option was supplied). - *
-
Become a daemon process:
-
- *
-
If daemon was not invoked by init(8) or inetd(8):
-
- *
- Background the process to lose process group leadership.
- *
- Start a new process session.
- *
-
Under SVR4, background the process again to lose process session leadership. This prevents the process from ever gaining a controlling terminal. This only happens when SVR4
is defined and NO_EXTRA_SVR4_FORK
is not defined when libslack(3) is compiled. Before doing this, ignore SIGHUP
because when the session leader terminates, all processes in the foreground process group are sent a SIGHUP
signal (apparently). Note that this code may not execute (e.g. when started by init(8) or inetd(8) or when either SVR4
was not defined or NO_EXTRA_SVR4_FORK
was defined when libslack(3) was compiled). This means that the client can't make any assumptions about the SIGHUP
handler.
-
- *
- Change directory to the root directory so as not to hamper umounts.
- *
- Clear the umask to enable explicit file creation modes.
- *
-
Close all open file descriptors. If daemon was invoked by inetd(8),
stdin
, stdout
and stderr
are left open since they are open to a socket. - *
-
Open
stdin
, stdout
and stderr
to /dev/null
in case something requires them to be open. Of course, this is not done if daemon was invoked by inetd(8). - *
-
If the
--name
option was supplied, create and lock a file containing the process id of the daemon process. The presence of this locked file prevents two instances of a daemon with the same name from running at the same time. The standard location of the pidfile is /var/run
for root or /tmp
for ordinary users. If the --pidfiles
option was supplied, its argument specifies the directory in which the pidfile will be placed. If the --pidfile
option was supplied, its argument specifies the name of the pidfile and the directory in which it will be placed.
-
- *
-
If the
--umask
option was supplied, set the umask to its argument. Otherwise, set the umask to 022 to prevent clients from accidentally creating group or world writable files. - *
-
Set the current directory if the
--chdir
option was supplied. - *
-
Spawn the client command and wait for it to terminate. The client command
may be specified as command line arguments or as the argument of the
--command
option. If both the --command
option and command line arguments are present, the client command is the result of appending the command line arguments to the argument of the --command
option. - *
-
If the
--syslog
, --outlog
and/or --errlog
options were supplied, the client's standard output and/or standard error are captured by daemon and sent to the respective syslog destinations. - *
-
When the client terminates, daemon respawns it if the
--respawn
option was supplied. If the client ran for less than 300 seconds (or the value of the --acceptable
option), then daemon sees this as an error. It will attempt to restart the client up to five times (or the value of the --attempts
option) before waiting for 300 seconds (or the value of the --delay
option). This gives the administrator the chance to correct whatever is preventing the client from running without overloading system resources. If the --limit
option was supplied, daemon terminates after the specified number of spawn attempt bursts. The default is zero which means never give up, never surrender.When the client terminates and the --respawn
option wasn't supplied, daemon terminates. - *
-
If daemon receives a
SIGTERM
signal, it propagates the signal to the client and then terminates. - *
-
If daemon receives a
SIGUSR1
signal (from another invocation of daemon supplied with the --restart
option), it sends a SIGTERM
signal to the client. If started with the --respawn
option, the client process will be restarted after it is killed by the SIGTERM
signal. - *
-
If the
--foreground
option was supplied, the client process is run as a foreground process and is not turned into a daemon. If daemon is connected to a terminal, so will the client process. If daemon is not connected to a terminal but the client needs to be connected to a terminal, use the --pty
option.
OPTIONS
-
-h
, --help
- Display a help message and exit.
-
-V
, --version
- Display a version message and exit.
-
-v
[level], --verbose
[=level] -
Set the message verbosity level to level (or 1 if level is not
supplied). daemon does not have any verbose messages so this has no
effect unless the
--running
option is supplied. -
-d
[level], --debug
[=level] -
Set the debug message level to level (or 1 if level is not supplied).
Level 1 traces high level function calls. Level 2 traces lower level
function calls and shows configuration information. Level 3 adds environment
variables. Level 9 adds every return value from select(2) to the output.
Debug messages are sent to the destination specified by the
--dbglog
option (by default, the syslog(3) facility, daemon.debug
). -
-C
path, --config=
path -
Specify the configuration file to use. By default,
/etc/daemon.conf
is the configuration file if it exists and is not group or world writable and does not exist in a group or world writable directory. The configuration file lets you predefine options that apply to all clients and to specifically named clients. -
-N
, --noconfig
-
Bypass the system configuration file,
/etc/daemon.conf
. Only the user's ~/.daemonrc
configuration file will be read (if it exists). -
-n
name, --name=
name -
Create and lock a pid file (
/var/run/
name .pid
), ensuring that only one daemon with the given name is active at the same time. -
-X
cmd, --command=
cmd -
Specify the client command as an option. If a command is specified along
with its name in the configuration file, then daemons can be started merely
by mentioning their name:
daemon --name ftumpch
Note: Specifying the client command in the configuration file means that no shell features are available (i.e. no meta characters).
-
-P
/dir, --pidfiles=
/dir -
Override the standard pidfile location. The standard pidfile location is
user dependent: root's pidfiles live in
/var/run
. Normal users' pidfiles live in /tmp
. This option can only be used with the --name
option. Use this option if these locations are unacceptable but make sure you don't forget where you put your pidfiles. This option is best used in configuration files or in shell scripts, not on the command line. -
-F
/path, --pidfile=
/path -
Override the standard pidfile name and location. The standard pidfile location
is described immediately above. The standard pidfile name is the argument of
the
--name
option followed by .pid
. Use this option if the standard pidfile name and location are unacceptable but make sure you don't forget where you put your pidfile. This option should only be used in configuration files or in shell scripts, not on the command line. -
-u
user[:[group]], --user=
user[:[group]] -
Run the client as a different user (and group). This only works for root.
If the argument includes a :group specifier, daemon will assume the
specified group and no other. Otherwise, daemon will assume all groups
that the specified user is in. For backwards compatibility, "." may be
used instead of ":" to separate the user and group but since "." may
appear in user and group names, ambiguities can arise such as using
--user=
u.g with users u and u.g and group g. With such an ambiguity, daemon will assume the user u and group g. Use --user=
u.g: instead for the other interpretation. -
-R
path, --chroot=
path - Change the root directory to path before running the client. On some systems, only root can do this. Note that the path to the client program and to the configuration file (if any) must be relative to the new root path.
-
-D
path, --chdir=
path - Change the directory to path before running the client.
-
-m
umask, --umask=
umask - Change the umask to umask before running the client. umask must be a valid octal mode. The default umask is 022.
-
-e
var=val, --env=
var=val - Set an environment variable for the client process. This option can be used any number of times. If it is used, only the supplied environment variables are passed to the client process. Otherwise, the client process inherits the current set of environment variables.
-
-i
, --inherit
-
Explicitly inherit environment variables. This is only needed when the
--env
option is used. When this option is used, the --env
option adds to the inherited environment, rather than replacing it. -
-U
, --unsafe
-
Allow reading an unsafe configuration file and execution of an unsafe
executable. A configuration file or executable is unsafe if it is group or
world writable or is in a directory that is group or world writable
(following symbolic links). If an executable is a script interpreted by
another executable, then it is considered unsafe if the interpreter is
unsafe. If the interpreter is
/usr/bin/env
(with an argument that is a command name to be searched for in $PATH), then that command must be safe. By default, daemon(1) will refuse to read an unsafe configuration file or to execute an unsafe executable when run by root. This option overrides that behaviour and hence should never be used. -
-S
, --safe
- Deny reading an unsafe configuration file and execution of an unsafe executable. By default, daemon(1) will allow reading an unsafe configuration file and execution of an unsafe executable when run by ordinary users. This option overrides that behaviour.
-
-c
, --core
- Allow the client to create a core file. This should only be used for debugging as it could lead to security holes in daemons run by root.
-
-r
, --respawn
- Respawn the client when it terminates.
-
-a
#, --acceptable=
# -
Specify the minimum acceptable duration in seconds of a client process. The
default value is 300 seconds. It cannot be set to less than 10 seconds
except by root when used in conjunction with the
--idiot
option. This option can only be used with the --respawn
option.less than this, it is considered to have failed.
-
-A
#, --attempts=
# -
Number of attempts to spawn before delaying. The default value is 5. It
cannot be set to more than 100 attempts except by root when used in
conjunction with the
--idiot
option. This option can only be used with the --respawn
option. -
-L
#, --delay=
# -
Delay in seconds between each burst of spawn attempts. The default value is
300 seconds. It cannot be set to less than 10 seconds except by root when
used in conjunction with the
--idiot
option. This option can only be used with the --respawn
option. -
-M
#, - --limit=
# -
Limit the number of spawn attempt bursts. The default value is zero which
means no limit. This option can only be used with the
--respawn
option. -
--idiot
-
Turn on idiot mode in which daemon will not enforce the minimum or
maximum values normally imposed on the
--acceptable
, --attempts
and --delay
option arguments. The --idiot
option must appear before any of these options. Only the root user may use this option because it can turn a slight misconfiguration into a lot of wastedCPUeffort and log messages. -
-f
, --foreground
- Run the client in the foreground. The client is not turned into a daemon.
-
-p
[noecho], --pty
[=noecho] -
Connect the client to a pseudo terminal. This option can only be used with
the
--foreground
option. This is the default when the --foreground
option is supplied and daemon's standard input is connected to a terminal. This option is only necessary when the client process must be connected to a controlling terminal but daemon itself has been run without a controlling terminal (e.g. from cron(8) or a pipeline).If the noecho
argument is supplied with this option, the client's side of the pseudo terminal will be set to noecho mode. Use this only if there really is a terminal involved and input is being echoed twice. -
-l
spec, --errlog=
spec -
Send daemon's standard output and error to the syslog destination or file
specified by spec. If spec is of the form "facility.priority", then
output is sent to syslog(3). Otherwise, output is appended to the file
whose path is given in spec. By default, output is sent to
daemon.err
. -
-b
spec, --dbglog=
spec -
Send daemon's debug output to the syslog destination or file specified by
spec. If spec is of the form "facility.priority", then output is
sent to syslog(3). Otherwise, output is appended to the file whose path
is given in spec. By default, output is sent to
daemon.debug
. -
-o
spec, --output=
spec -
Capture the client's standard output and error and send it to the syslog
destination or file specified by spec. If spec is of the form
"facility.priority", then output is sent to syslog(3). Otherwise,
output is appended to the file whose path is given in spec. By default,
output is discarded unless the
--foreground
option is present. In this case, the client's stdout and stderr are propagated to daemon's stdout and stderr respectively. -
-O
spec, --stdout=
spec -
Capture the client's standard output and send it to the syslog destination
or file specified by spec. If spec is of the form
"facility.priority", then output is sent to syslog(3). Otherwise,
stdout is appended to the file whose path is given in spec. By default,
stdout is discarded unless the
--foreground
option is present, in which case, the client's stdout is propagated to daemon's stdout. -
-E
spec, --stderr=
spec -
Capture the client's standard error and send it to the syslog destination
specified by spec. If spec is of the form "facility.priority", then
stderr is sent to syslog(3). Otherwise, stderr is appended to the file
whose path is given in spec. By default, stderr is discarded unless the
--foreground
option is present, in this case, the client's stderr is propagated to daemon's stderr. -
--running
-
Check whether or not a named daemon is running, then exit(3) with
EXIT_SUCCESS
if the named daemon is running or EXIT_FAILURE
if it isn't. If the --verbose
option is supplied, print a message before exiting. This option can only be used with the --name
option. Note that the --chroot
, --user
, --name
, --pidfiles
and --pidfile
(and possibly --config
) options must be the same as for the target daemon. Note that the --running
option must appear before any --pidfile
or --pidfiles
option when checking if another user's daemon is running otherwise you might get an error about the pidfile directory not being writable. -
--restart
-
Instruct a named daemon to terminate and restart its client process. This
option can only be used with the
--name
option. Note that the --chroot
, --user
, --name
, --pidfiles
and --pidfile
(and possibly --config
) options must be the same as for the target daemon. -
--stop
-
Stop a named daemon then exit(3). This option can only be used with the
--name
option. Note that the --chroot
, --user
, --name
, --pidfiles
and --pidfile
(and possibly --config
) options must be the same as for the target daemon.
As with all other programs, a
--
argument signifies the end of options.
Any options that appear on the command line after
--
are part of the
client command.
FILES
/etc/daemon.conf, ~/.daemonrc
- define default options
Each line of the configuration file consists of a client name or '*', followed by whitespace, followed by a comma separated list of options. Blank lines and comments ('#' to end of the line) are ignored. Lines may be continued with a '\' character at the end of the line.
For example:
* errlog=daemon.err,output=local0.err,core test1 syslog=local0.debug,debug=9,verbose=9,respawn test2 syslog=local0.debug,debug=9,verbose=9,respawn
The command line options are processed first to look for a
--config
option. If no
--config
option was supplied, the default file,
/etc/daemon.conf
, is used. If the user has their own configuration file
(
~/.daemonrc
) it is also used. If the configuration files contain any
generic ('*') entries, their options are applied in order of appearance.
If the
--name
option was supplied and the configuration files contain any
entries with the given name, their options are then applied in order of
appearance. Finally, the command line options are applied again. This
ensures that any generic options apply to all clients by default. Client
specific options override generic options. User options override system wide
options. Command line options override everything else.
Note that the configuration files are not opened and read until after any
--chroot
and/or
--user
command line options are processed. This means
that the configuration file paths and the client's file path must be relative
to the
--chroot
argument. It also means that the configuration files and
the client executable must be readable/executable by the user specified by
the
--user
argument. It also means that the
--chroot
and
--user
options must not appear in the configuration file. Also note that the
--name
must not appear in the configuration file either.
BUGS
If you specify (in a configuration file) that all clients allow core file generation, there is no way to countermand that for any client (without using an alternative configuration file). So don't do that. The same applies to respawning and foreground.It is possible for the client process to obtain a controlling terminal under
flag, the process doing so will obtain a controlling terminal and then be susceptible to unintended termination by a SIGHUP
.
Clients run in the foreground with a pseudo terminal don't respond to job
control (i.e. suspending with Control-Z doesn't work). This is because the
client belongs to an orphaned process group (it starts in its own process
session) so the kernel won't send it
SIGSTOP
signals. However, if the
client is a shell that supports job control, it's subprocesses can be
suspended.
Clients can only be restarted if they were started with the
--respawn
option. Using
--restart
on a non-respawning daemon client is equivalent
to using
--stop
.
MAILING LISTS
The following mailing lists exist for daemon related discussion:
daemon-announce@libslack.org - Announcements daemon-users@libslack.org - User forum daemon-dev@libslack.org - Development forum
To subscribe to any of these mailing lists, send a mail message to
listname
-request@libslack.org
with
subscribe
as the message body.
e.g.
$ echo subscribe | mail daemon-announce-request@libslack.org $ echo subscribe | mail daemon-users-request@libslack.org $ echo subscribe | mail daemon-dev-request@libslack.org
Or you can send a mail message to
majordomo@libslack.org
with
subscribe
listname in the message body. This way, you can
subscribe to multiple lists at the same time.
e.g.
$ mail majordomo@libslack.org subscribe daemon-announce subscribe daemon-users subscribe daemon-dev .
A digest version of each mailing list is also available. Subscribe to
digests as above but append
-digest
to the listname.