targen (1)
NAME
Generate - Generate Target deviceb test chart color values.
DESCRIPTION
Generate Target deviceb test chart color values, Version 1.6.3
SYNOPSIS
targen
[options] outfile
- -v [level]
-
Verbose mode [optional level 1..N]
- -d col_comb
-
choose colorant combination from the following:
0: Print grey
1: Video grey
2: Print RGB
3: Video RGB
4: CMYK
5: CMY
6: CMYK + Light CM
7: CMYK + Light CMK
8: CMYK + Red + Blue
9: CMYK + Orange + Green
10: CMYK + Light CMK + Light Light K
11: CMYK + Orange + Green + Light CM
12: CMYK + Light CM + Medium CM
- -D colorant
-
Add or delete colorant from combination:
(Use -?? to list known colorants)
- -G
-
Generate good optimized points rather than Fast
- -e patches
-
White test patches (default 4)
- -B patches
-
Black test patches (default 4 Grey/RGB, else 0)
- -s steps
-
Single channel steps (default grey 50, color 0)
- -g steps
-
Grey axis RGB or CMY steps (default 0)
- -m steps
-
Multidimensional device space cube steps (default 0)
- -b steps
-
Multidimensional body centered cubic steps (default 0)
- -f patches
-
Add iterative & adaptive full spread patches to total (default grey 0, color 836)
Default is Optimised Farthest Point Sampling (OFPS)
- -t
-
Use incremental far point for full spread
- -r
-
Use device space random for full spread
- -R
-
Use perceptual space random for full spread
- -q
-
Use device space-filling quasi-random for full spread
- -Q
-
Use perceptual space-filling quasi-random for full spread
- -i
-
Use device space body centered cubic grid for full spread
- -I
-
Use perceptual space body centered cubic grid for full spread
- -a angle
-
Simplex grid angle 0.0 - 0.5 for B.C.C. grid, default 0.333300
- -A adaptation
-
Degree of adaptation of OFPS 0.0 - 1.0 (default 0.1, -c profile used 1.0)
- -l ilimit
-
Total ink limit in % (default = none)
- -p power
-
Optional power-like value applied to all device values.
- -c profile
-
Optional device ICC or MPP pre-conditioning profile filename
(Use "none" to turn off any conditioning)
- -N nemphasis
-
Degree of neutral axis patch concentration 0.0-1.0 (default 0.50)
- -V demphasis
-
Degree of dark region patch concentration 1.0-4.0 (default 1.00 = none)
- -F L,a,b,rad
-
Filter out samples outside Lab sphere.
- -w
-
Dump diagnostic outfilel.wrl file (Lab locations)
- -W
-
Dump diagnostic outfiled.wrl file (Device locations)
- outfile
-
Base name for output(.ti1)