Generate Target deviceb test chart color values, Version 1.8.3 Author: Graeme W. Gill, licensed under the AGPL Version 3 usage: targen [options] outfile Diagnostic: Usage requested -v [level] Verbose mode [optional level 1..N] -d col_comb choose colorant combination from the following: 0: Print grey 1: Video grey 2: Print RGB 3: Video RGB 4: CMYK 5: CMY 6: CMYK + Light CM 7: CMYK + Light CMK 8: CMYK + Red + Blue 9: CMYK + Orange + Green 10: CMYK + Light CMK + Light Light K 11: CMYK + Orange + Green + Light CM 12: CMYK + Light CM + Medium CM -D colorant Add or delete colorant from combination: (Use -?? to list known colorants) -G Generate good optimized points rather than Fast -e patches White test patches (default 4) -B patches Black test patches (default 4 Grey/RGB, else 0) -s steps Single channel steps (default grey 50, color 0) -g steps Grey axis RGB or CMY steps (default 0) -m steps Multidimensional device space cube steps (default 0) -b steps Multidimensional body centered cubic steps (default 0) -f patches Add iterative & adaptive full spread patches to total (default grey 0, color 836) Default is Optimised Farthest Point Sampling (OFPS) -t Use incremental far point for full spread -r Use device space random for full spread -R Use perceptual space random for full spread -q Use device space-filling quasi-random for full spread -Q Use perceptual space-filling quasi-random for full spread -i Use device space body centered cubic grid for full spread -I Use perceptual space body centered cubic grid for full spread -a angle Simplex grid angle 0.0 - 0.5 for B.C.C. grid, default 0.333300 -A adaptation Degree of adaptation of OFPS 0.0 - 1.0 (default 0.1, -c profile used 1.0) -l ilimit Total ink limit in % (default = none) -p power Optional power-like value applied to all device values. -c profile Optional device ICC or MPP pre-conditioning profile filename (Use "none" to turn off any conditioning) -N nemphasis Degree of neutral axis patch concentration 0.0-1.0 (default 0.50) -V demphasis Degree of dark region patch concentration 1.0-4.0 (default 1.00 = none) -F L,a,b,rad Filter out samples outside Lab sphere. -O Don't re-order display RGB patches for minimum delay -w Dump diagnostic outfilel.x3d.html file (Lab locations) -W Dump diagnostic outfiled.x3d.html file (Device locations) outfile Base name for output(.ti1)

Generate Target deviceb test chart color values, Version 1.8.3 Author: Graeme W. Gill, licensed under the AGPL Version 3 usage: targen [options] outfile Diagnostic: Usage requested -v [level] Verbose mode [optional level 1..N] -d col_comb choose colorant combination from the following: 0: Print grey 1: Video grey 2: Print RGB 3: Video RGB 4: CMYK 5: CMY 6: CMYK + Light CM 7: CMYK + Light CMK 8: CMYK + Red + Blue 9: CMYK + Orange + Green 10: CMYK + Light CMK + Light Light K 11: CMYK + Orange + Green + Light CM 12: CMYK + Light CM + Medium CM -D colorant Add or delete colorant from combination: (Use -?? to list known colorants) -G Generate good optimized points rather than Fast -e patches White test patches (default 4) -B patches Black test patches (default 4 Grey/RGB, else 0) -s steps Single channel steps (default grey 50, color 0) -g steps Grey axis RGB or CMY steps (default 0) -m steps Multidimensional device space cube steps (default 0) -b steps Multidimensional body centered cubic steps (default 0) -f patches Add iterative & adaptive full spread patches to total (default grey 0, color 836) Default is Optimised Farthest Point Sampling (OFPS) -t Use incremental far point for full spread -r Use device space random for full spread -R Use perceptual space random for full spread -q Use device space-filling quasi-random for full spread -Q Use perceptual space-filling quasi-random for full spread -i Use device space body centered cubic grid for full spread -I Use perceptual space body centered cubic grid for full spread -a angle Simplex grid angle 0.0 - 0.5 for B.C.C. grid, default 0.333300 -A adaptation Degree of adaptation of OFPS 0.0 - 1.0 (default 0.1, -c profile used 1.0) -l ilimit Total ink limit in % (default = none) -p power Optional power-like value applied to all device values. -c profile Optional device ICC or MPP pre-conditioning profile filename (Use "none" to turn off any conditioning) -N nemphasis Degree of neutral axis patch concentration 0.0-1.0 (default 0.50) -V demphasis Degree of dark region patch concentration 1.0-4.0 (default 1.00 = none) -F L,a,b,rad Filter out samples outside Lab sphere. -O Don't re-order display RGB patches for minimum delay -w Dump diagnostic outfilel.x3d.html file (Lab locations) -W Dump diagnostic outfiled.x3d.html file (Device locations) outfile Base name for output(.ti1)