Measure spot values, Version 1.8.3 Author: Graeme W. Gill, licensed under the GPL Version 2 or later Diagnostic: Flag -- not recognised usage: spotread [-options] [logfile] -v Verbose mode -s Print spectrum for each reading -S Plot spectrum for each reading -c listno Set communication port from the following list (default 1) 1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS10' 4 = '/dev/ttyS11' 5 = '/dev/ttyS12' 6 = '/dev/ttyS13' 7 = '/dev/ttyS14' 8 = '/dev/ttyS15' 9 = '/dev/ttyS16' 10 = '/dev/ttyS17' 11 = '/dev/ttyS18' 12 = '/dev/ttyS19' 13 = '/dev/ttyS2' 14 = '/dev/ttyS20' 15 = '/dev/ttyS21' 16 = '/dev/ttyS22' 17 = '/dev/ttyS23' 18 = '/dev/ttyS24' 19 = '/dev/ttyS25' 20 = '/dev/ttyS26' 21 = '/dev/ttyS27' 22 = '/dev/ttyS28' 23 = '/dev/ttyS29' 24 = '/dev/ttyS3' 25 = '/dev/ttyS30' 26 = '/dev/ttyS31' 27 = '/dev/ttyS4' 28 = '/dev/ttyS5' 29 = '/dev/ttyS6' 30 = '/dev/ttyS7' 31 = '/dev/ttyS8' 32 = '/dev/ttyS9' -t Use transmission measurement mode -e Use emissive measurement mode (absolute results) -eb Use display white brightness relative measurement mode -ew Use display white point relative chromatically adjusted mode -p Use telephoto measurement mode (absolute results) -pb Use projector white brightness relative measurement mode -pw Use projector white point relative chromatically adjusted mode -a Use ambient measurement mode (absolute results) -f Use ambient flash measurement mode (absolute results) -y l|c Other: l = LCD, c = CRT -I illum Set simulated instrument illumination using FWA (def -i illum): M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] -i illum Choose illuminant for computation of CIE XYZ from spectral reflectance & FWA: A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -Q observ Choose CIE Observer for spectral data or CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 (Choose FWA during operation) -F filter Set filter configuration (if aplicable): n None p Polarising filter 6 D65 u U.V. Cut -E extrafilterfile Apply extra filter compensation file -x Display Yxy instead of Lab -h Display LCh instead of Lab -V Show running average and std. devation from ref. -T Display correlated color temperatures, CRI and TLCI -N Disable auto calibration of instrument -O Do one cal. or measure and exit -H Start in high resolution spectrum mode (if available) -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Y r|n Override refresh, non-refresh display mode -Y R:rate Override measured refresh rate with rate Hz -Y A Use non-adaptive integration time mode (if available). -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr logfile Optional file to save reading results as text

Measure spot values, Version 1.8.3 Author: Graeme W. Gill, licensed under the GPL Version 2 or later Diagnostic: Flag -- not recognised usage: spotread [-options] [logfile] -v Verbose mode -s Print spectrum for each reading -S Plot spectrum for each reading -c listno Set communication port from the following list (default 1) 1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS10' 4 = '/dev/ttyS11' 5 = '/dev/ttyS12' 6 = '/dev/ttyS13' 7 = '/dev/ttyS14' 8 = '/dev/ttyS15' 9 = '/dev/ttyS16' 10 = '/dev/ttyS17' 11 = '/dev/ttyS18' 12 = '/dev/ttyS19' 13 = '/dev/ttyS2' 14 = '/dev/ttyS20' 15 = '/dev/ttyS21' 16 = '/dev/ttyS22' 17 = '/dev/ttyS23' 18 = '/dev/ttyS24' 19 = '/dev/ttyS25' 20 = '/dev/ttyS26' 21 = '/dev/ttyS27' 22 = '/dev/ttyS28' 23 = '/dev/ttyS29' 24 = '/dev/ttyS3' 25 = '/dev/ttyS30' 26 = '/dev/ttyS31' 27 = '/dev/ttyS4' 28 = '/dev/ttyS5' 29 = '/dev/ttyS6' 30 = '/dev/ttyS7' 31 = '/dev/ttyS8' 32 = '/dev/ttyS9' -t Use transmission measurement mode -e Use emissive measurement mode (absolute results) -eb Use display white brightness relative measurement mode -ew Use display white point relative chromatically adjusted mode -p Use telephoto measurement mode (absolute results) -pb Use projector white brightness relative measurement mode -pw Use projector white point relative chromatically adjusted mode -a Use ambient measurement mode (absolute results) -f Use ambient flash measurement mode (absolute results) -y l|c Other: l = LCD, c = CRT -I illum Set simulated instrument illumination using FWA (def -i illum): M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp] -i illum Choose illuminant for computation of CIE XYZ from spectral reflectance & FWA: A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp -Q observ Choose CIE Observer for spectral data or CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2 (Choose FWA during operation) -F filter Set filter configuration (if aplicable): n None p Polarising filter 6 D65 u U.V. Cut -E extrafilterfile Apply extra filter compensation file -x Display Yxy instead of Lab -h Display LCh instead of Lab -V Show running average and std. devation from ref. -T Display correlated color temperatures, CRI and TLCI -N Disable auto calibration of instrument -O Do one cal. or measure and exit -H Start in high resolution spectrum mode (if available) -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Y r|n Override refresh, non-refresh display mode -Y R:rate Override measured refresh rate with rate Hz -Y A Use non-adaptive integration time mode (if available). -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr logfile Optional file to save reading results as text