spotread (1)
NAME
Measure - Read Print Spot values.
DESCRIPTION
Measure spot values, Version 1.6.3
SYNOPSIS
spotread
[-options] [logfile]
- -v
-
Verbose mode
- -s
-
Print spectrum for each reading
- -S
-
Plot spectrum for each reading
- -c listno
-
Set communication port from the following list (default 1)
-
** No ports found **
- -t
-
Use transmission measurement mode
- -e
-
Use emissive measurement mode (absolute results)
- -eb
-
Use display white brightness relative measurement mode
- -ew
-
Use display white point relative chromatically adjusted mode
- -p
-
Use telephoto measurement mode (absolute results)
- -pb
-
Use projector white brightness relative measurement mode
- -pw
-
Use projector white point relative chromatically adjusted mode
- -a
-
Use ambient measurement mode (absolute results)
- -f
-
Use ambient flash measurement mode (absolute results)
- -I illum
-
Set simulated instrument illumination using FWA (def -i illum):
M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]
- -i illum
-
Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
- -Q observ
-
Choose CIE Observer for spectral data or CCSS instrument:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
(Choose FWA during operation)
- -F filter
-
Set filter configuration (if aplicable):
- n
-
None
- p
-
Polarising filter
- 6
-
D65
- u
-
U.V. Cut
- -E extrafilterfile
-
Apply extra filter compensation file
- -x
-
Display Yxy instead of Lab
- -h
-
Display LCh instead of Lab
- -V
-
Show running average and std. devation from ref.
- -T
-
Display correlated color temperatures and CRI
- -N
-
Disable auto calibration of instrument
- -H
-
Start in high resolution spectrum mode (if available)
- -X file.ccmx
-
Apply Colorimeter Correction Matrix
- -X file.ccss
-
Use Colorimeter Calibration Spectral Samples for calibration
- -Y r|n
-
Override refresh, non-refresh display mode
- -Y R:rate
-
Override measured refresh rate with rate Hz
- -Y A
-
Use non-adaptive integration time mode (if available).
- -W n|h|x
-
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
- -D [level]
-
Print debug diagnostics to stderr
- logfile
-
Optional file to save reading results as text