crypto_freesession (9)

Leading comments

	$OpenBSD: crypto.9,v 1.19 2002/07/16 06:31:57 angelos Exp $

 The author of this manual page is Angelos D. Keromytis (angelos@cis.upenn.edu)

 Copyright (c) 2000, 2001 Angelos D. Keromytis

 Permission to use, copy, and modify this software with or without fee
 is hereby granted, provided that this entire notice is included in
 all source code copies of any software which is or includes a copy or
 modification of this software.

 THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS O...

(The comments found at the beginning of the groff file "man9/crypto_freesession.9freebsd".)

NAME

crypto - API for cryptographic services in the kernel

SYNOPSIS

In opencrypto/cryptodev.h Ft int32_t Fn crypto_get_driverid uint8_t Ft int Fn crypto_register uint32_t int uint16_t uint32_t int lp]*rp]lp]void *, uint32_t *, struct cryptoini *rp] int lp]*rp]lp]void *, uint64_trp] int lp]*rp]lp]void *, struct cryptop *rp] void * Ft int Fn crypto_kregister uint32_t int uint32_t int lp]*rp]lp]void *, struct cryptkop *rp] void * Ft int Fn crypto_unregister uint32_t int Ft int Fn crypto_unregister_all uint32_t Ft void Fn crypto_done struct cryptop * Ft void Fn crypto_kdone struct cryptkop * Ft int Fn crypto_newsession uint64_t * struct cryptoini * int Ft int Fn crypto_freesession uint64_t Ft int Fn crypto_dispatch struct cryptop * Ft int Fn crypto_kdispatch struct cryptkop * Ft int Fn crypto_unblock uint32_t int Ft struct cryptop * Fn crypto_getreq int Ft void Fn crypto_freereq void

#define CRYPTO_SYMQ     0x1
#define CRYPTO_ASYMQ    0x2

#define EALG_MAX_BLOCK_LEN      16

struct cryptoini {
        int                cri_alg;
        int                cri_klen;
        int                cri_mlen;
        caddr_t            cri_key;
        uint8_t            cri_iv[EALG_MAX_BLOCK_LEN];
        struct cryptoini  *cri_next;
};

struct cryptodesc {
        int                crd_skip;
        int                crd_len;
        int                crd_inject;
        int                crd_flags;
        struct cryptoini   CRD_INI;
#define crd_iv          CRD_INI.cri_iv
#define crd_key         CRD_INI.cri_key
#define crd_alg         CRD_INI.cri_alg
#define crd_klen        CRD_INI.cri_klen
        struct cryptodesc *crd_next;
};

struct cryptop {
        TAILQ_ENTRY(cryptop) crp_next;
        uint64_t           crp_sid;
        int                crp_ilen;
        int                crp_olen;
        int                crp_etype;
        int                crp_flags;
        caddr_t            crp_buf;
        caddr_t            crp_opaque;
        struct cryptodesc *crp_desc;
        int              (*crp_callback) (struct cryptop *);
        caddr_t            crp_mac;
};

struct crparam {
        caddr_t         crp_p;
        u_int           crp_nbits;
};

#define CRK_MAXPARAM    8

struct cryptkop {
        TAILQ_ENTRY(cryptkop) krp_next;
        u_int              krp_op;         /* ie. CRK_MOD_EXP or other */
        u_int              krp_status;     /* return status */
        u_short            krp_iparams;    /* # of input parameters */
        u_short            krp_oparams;    /* # of output parameters */
        uint32_t           krp_hid;
        struct crparam     krp_param[CRK_MAXPARAM];
        int               (*krp_callback)(struct cryptkop *);
};

DESCRIPTION

ifconfig is a framework for drivers of cryptographic hardware to register with the kernel so ``consumers'' (other kernel subsystems, and users through the /dev/crypto device) are able to make use of it. Drivers register with the framework the algorithms they support, and provide entry points (functions) the framework may call to establish, use, and tear down sessions. Sessions are used to cache cryptographic information in a particular driver (or associated hardware), so initialization is not needed with every request. Consumers of cryptographic services pass a set of descriptors that instruct the framework (and the drivers registered with it) of the operations that should be applied on the data (more than one cryptographic operation can be requested).

Keying operations are supported as well. Unlike the symmetric operators described above, these sessionless commands perform mathematical operations using input and output parameters.

Since the consumers may not be associated with a process, drivers may not sleep(9). The same holds for the framework. Thus, a callback mechanism is used to notify a consumer that a request has been completed (the callback is specified by the consumer on a per-request basis). The callback is invoked by the framework whether the request was successfully completed or not. An error indication is provided in the latter case. A specific error code, Er EAGAIN , is used to indicate that a session number has changed and that the request may be re-submitted immediately with the new session number. Errors are only returned to the invoking function if not enough information to call the callback is available (meaning, there was a fatal error in verifying the arguments). For session initialization and teardown there is no callback mechanism used.

The Fn crypto_newsession routine is called by consumers of cryptographic services (such as the ipsec(4) stack) that wish to establish a new session with the framework. On success, the first argument will contain the Session Identifier (SID). The second argument contains all the necessary information for the driver to establish the session. The third argument indicates whether a hardware driver (1) should be used or not (0). The various fields in the Vt cryptoini structure are:

cri_alg

Contains an algorithm identifier. Currently supported algorithms are:

CRYPTO_AES_CBC

CRYPTO_ARC4

CRYPTO_BLF_CBC

CRYPTO_CAMELLIA_CBC

CRYPTO_CAST_CBC

CRYPTO_DES_CBC

CRYPTO_3DES_CBC

CRYPTO_SKIPJACK_CBC

CRYPTO_MD5

CRYPTO_MD5_HMAC

CRYPTO_MD5_KPDK

CRYPTO_RIPEMD160_HMAC

CRYPTO_SHA1

CRYPTO_SHA1_HMAC

CRYPTO_SHA1_KPDK

CRYPTO_SHA2_256_HMAC

CRYPTO_SHA2_384_HMAC

CRYPTO_SHA2_512_HMAC

CRYPTO_NULL_HMAC

CRYPTO_NULL_CBC

cri_klen

Specifies the length of the key in bits, for variable-size key algorithms.

cri_mlen

Specifies how many bytes from the calculated hash should be copied back. 0 means entire hash.

cri_key

Contains the key to be used with the algorithm.

cri_iv

Contains an explicit initialization vector (IV), if it does not prefix the data. This field is ignored during initialization. If no IV is explicitly passed (see below on details), a random IV is used by the device driver processing the request.

cri_next

Contains a pointer to another Vt cryptoini structure. Multiple such structures may be linked to establish multi-algorithm sessions (ipsec4 is an example consumer of such a feature).

The Vt cryptoini structure and its contents will not be modified by the framework (or the drivers used). Subsequent requests for processing that use the SID returned will avoid the cost of re-initializing the hardware (in essence, SID acts as an index in the session cache of the driver).

Fn crypto_freesession is called with the SID returned by Fn crypto_newsession to disestablish the session.

Fn crypto_dispatch is called to process a request. The various fields in the Vt cryptop structure are:

crp_sid

Contains the SID.

crp_ilen

Indicates the total length in bytes of the buffer to be processed.

crp_olen

On return, contains the total length of the result. For symmetric crypto operations, this will be the same as the input length. This will be used if the framework needs to allocate a new buffer for the result (or for re-formatting the input).

crp_callback

This routine is invoked upon completion of the request, whether successful or not. It is invoked through the Fn crypto_done routine. If the request was not successful, an error code is set in the crp_etype field. It is the responsibility of the callback routine to set the appropriate spl(9) level.

crp_etype

Contains the error type, if any errors were encountered, or zero if the request was successfully processed. If the Er EAGAIN error code is returned, the SID has changed (and has been recorded in the crp_sid field). The consumer should record the new SID and use it in all subsequent requests. In this case, the request may be re-submitted immediately. This mechanism is used by the framework to perform session migration (move a session from one driver to another, because of availability, performance, or other considerations).

Note that this field only makes sense when examined by the callback routine specified in crp_callback Errors are returned to the invoker of Fn crypto_process only when enough information is not present to call the callback routine (i.e., if the pointer passed is NULL or if no callback routine was specified).

crp_flags

Is a bitmask of flags associated with this request. Currently defined flags are:

CRYPTO_F_IMBUF

The buffer pointed to by crp_buf is an mbuf chain.

CRYPTO_F_IOV

The buffer pointed to by crp_buf is an Vt uio structure.

CRYPTO_F_REL

Must return data in the same place.

CRYPTO_F_BATCH

Batch operation if possible.

CRYPTO_F_CBIMM

Do callback immediately instead of doing it from a dedicated kernel thread.

CRYPTO_F_DONE

Operation completed.

CRYPTO_F_CBIFSYNC

Do callback immediately if operation is synchronous.

crp_buf

Points to the input buffer. On return (when the callback is invoked), it contains the result of the request. The input buffer may be an mbuf chain or a contiguous buffer, depending on crp_flags

crp_opaque

This is passed through the crypto framework untouched and is intended for the invoking application's use.

crp_desc

This is a linked list of descriptors. Each descriptor provides information about what type of cryptographic operation should be done on the input buffer. The various fields are:

crd_iv

The field where IV should be provided when the CRD_F_IV_EXPLICIT flag is given.

crd_key

When the CRD_F_KEY_EXPLICIT flag is given, the crd_key points to a buffer with encryption or authentication key.

crd_alg

An algorithm to use. Must be the same as the one given at newsession time.

crd_klen

The crd_key key length.

crd_skip

The offset in the input buffer where processing should start.

crd_len

How many bytes, after crd_skip should be processed.

crd_inject

Offset from the beginning of the buffer to insert any results. For encryption algorithms, this is where the initialization vector (IV) will be inserted when encrypting or where it can be found when decrypting (subject to crd_flags ) For MAC algorithms, this is where the result of the keyed hash will be inserted.

crd_flags

The following flags are defined:

CRD_F_ENCRYPT

For encryption algorithms, this bit is set when encryption is required (when not set, decryption is performed).

CRD_F_IV_PRESENT

For encryption algorithms, this bit is set when the IV already precedes the data, so the crd_inject value will be ignored and no IV will be written in the buffer. Otherwise, the IV used to encrypt the packet will be written at the location pointed to by crd_inject The IV length is assumed to be equal to the blocksize of the encryption algorithm. Some applications that do special ``IV cooking'' such as the half-IV mode in ipsec(4), can use this flag to indicate that the IV should not be written on the packet. This flag is typically used in conjunction with the CRD_F_IV_EXPLICIT flag.

CRD_F_IV_EXPLICIT

For encryption algorithms, this bit is set when the IV is explicitly provided by the consumer in the crd_iv field. Otherwise, for encryption operations the IV is provided for by the driver used to perform the operation, whereas for decryption operations it is pointed to by the crd_inject field. This flag is typically used when the IV is calculated ``on the fly'' by the consumer, and does not precede the data (some ipsec(4) configurations, and the encrypted swap are two such examples).

CRD_F_KEY_EXPLICIT

For encryption and authentication (MAC) algorithms, this bit is set when the key is explicitly provided by the consumer in the crd_key field for the given operation. Otherwise, the key is taken at newsession time from the cri_key field.

CRD_F_COMP

For compression algorithms, this bit is set when compression is required (when not set, decompression is performed).

CRD_INI

This Vt cryptoini structure will not be modified by the framework or the device drivers. Since this information accompanies every cryptographic operation request, drivers may re-initialize state on-demand (typically an expensive operation). Furthermore, the cryptographic framework may re-route requests as a result of full queues or hardware failure, as described above.

crd_next

Point to the next descriptor. Linked operations are useful in protocols such as ipsec(4), where multiple cryptographic transforms may be applied on the same block of data.

Fn crypto_getreq allocates a Vt cryptop structure with a linked list of as many Vt cryptodesc structures as were specified in the argument passed to it.

Fn crypto_freereq deallocates a structure Vt cryptop and any Vt cryptodesc structures linked to it. Note that it is the responsibility of the callback routine to do the necessary cleanups associated with the opaque field in the Vt cryptop structure.

Fn crypto_kdispatch is called to perform a keying operation. The various fields in the Vt cryptkop structure are:

krp_op

Operation code, such as CRK_MOD_EXP

krp_status

Return code. This errno -style variable indicates whether lower level reasons for operation failure.

krp_iparams

Number if input parameters to the specified operation. Note that each operation has a (typically hardwired) number of such parameters.

krp_oparams

Number if output parameters from the specified operation. Note that each operation has a (typically hardwired) number of such parameters.

krp_kvp

An array of kernel memory blocks containing the parameters.

krp_hid

Identifier specifying which low-level driver is being used.

krp_callback

Callback called on completion of a keying operation.

DRIVER-SIDE API

The Fn crypto_get_driverid , Fn crypto_register , Fn crypto_kregister , Fn crypto_unregister , Fn crypto_unblock , and Fn crypto_done routines are used by drivers that provide support for cryptographic primitives to register and unregister with the kernel crypto services framework. Drivers must first use the Fn crypto_get_driverid function to acquire a driver identifier, specifying the Fa cc_flags as an argument (normally 0, but software-only drivers should specify CRYPTOCAP_F_SOFTWARE ) For each algorithm the driver supports, it must then call Fn crypto_register . The first two arguments are the driver and algorithm identifiers. The next two arguments specify the largest possible operator length (in bits, important for public key operations) and flags for this algorithm. The last four arguments must be provided in the first call to Fn crypto_register and are ignored in all subsequent calls. They are pointers to three driver-provided functions that the framework may call to establish new cryptographic context with the driver, free already established context, and ask for a request to be processed (encrypt, decrypt, etc.); and an opaque parameter to pass when calling each of these routines. Fn crypto_unregister is called by drivers that wish to withdraw support for an algorithm. The two arguments are the driver and algorithm identifiers, respectively. Typically, drivers for PCMCIA crypto cards that are being ejected will invoke this routine for all algorithms supported by the card. Fn crypto_unregister_all will unregister all algorithms registered by a driver and the driver will be disabled (no new sessions will be allocated on that driver, and any existing sessions will be migrated to other drivers). The same will be done if all algorithms associated with a driver are unregistered one by one.

The calling convention for the three driver-supplied routines is:

Ft int

Fn lp]*newsessionrp] void * uint32_t * struct cryptoini * ;

Ft int

Fn lp]*freesessionrp] void * uint64_t ;

Ft int

Fn lp]*processrp] void * struct cryptop * ;

Ft int

Fn lp]*kprocessrp] void * struct cryptkop * ;

On invocation, the first argument to all routines is an opaque data value supplied when the algorithm is registered with Fn crypto_register . The second argument to Fn newsession contains the driver identifier obtained via Fn crypto_get_driverid . On successful return, it should contain a driver-specific session identifier. The third argument is identical to that of Fn crypto_newsession .

The Fn freesession routine takes as arguments the opaque data value and the SID (which is the concatenation of the driver identifier and the driver-specific session identifier). It should clear any context associated with the session (clear hardware registers, memory, etc.).

The Fn process routine is invoked with a request to perform crypto processing. This routine must not block, but should queue the request and return immediately. Upon processing the request, the callback routine should be invoked. In case of an unrecoverable error, the error indication must be placed in the crp_etype field of the Vt cryptop structure. When the request is completed, or an error is detected, the Fn process routine should invoke Fn crypto_done . Session migration may be performed, as mentioned previously.

In case of a temporary resource exhaustion, the Fn process routine may return Er ERESTART in which case the crypto services will requeue the request, mark the driver as ``blocked'' and stop submitting requests for processing. The driver is then responsible for notifying the crypto services when it is again able to process requests through the Fn crypto_unblock routine. This simple flow control mechanism should only be used for short-lived resource exhaustion as it causes operations to be queued in the crypto layer. Doing so is preferable to returning an error in such cases as it can cause network protocols to degrade performance by treating the failure much like a lost packet.

The Fn kprocess routine is invoked with a request to perform crypto key processing. This routine must not block, but should queue the request and return immediately. Upon processing the request, the callback routine should be invoked. In case of an unrecoverable error, the error indication must be placed in the krp_status field of the Vt cryptkop structure. When the request is completed, or an error is detected, the Fn kprocess routine should invoked Fn crypto_kdone .

RETURN VALUES

Fn crypto_register , Fn crypto_kregister , Fn crypto_unregister , Fn crypto_newsession , Fn crypto_freesession , and Fn crypto_unblock return 0 on success, or an error code on failure. Fn crypto_get_driverid returns a non-negative value on error, and -1 on failure. Fn crypto_getreq returns a pointer to a Vt cryptop structure and NULL on failure. Fn crypto_dispatch returns Er EINVAL if its argument or the callback function was NULL and 0 otherwise. The callback is provided with an error code in case of failure, in the crp_etype field.

FILES

sys/opencrypto/crypto.c

most of the framework code

SEE ALSO

ipsec(4), malloc(9), sleep(9)

HISTORY

The cryptographic framework first appeared in Ox 2.7 and was written by An Angelos D. Keromytis Aq angelos@openbsd.org .

BUGS

The framework currently assumes that all the algorithms in a Fn crypto_newsession operation must be available by the same driver. If that is not the case, session initialization will fail.

The framework also needs a mechanism for determining which driver is best for a specific set of algorithms associated with a session. Some type of benchmarking is in order here.

Multiple instances of the same algorithm in the same session are not supported. Note that 3DES is considered one algorithm (and not three instances of DES). Thus, 3DES and DES could be mixed in the same request.