gitsubmodules (7)

Leading comments

    Title: gitsubmodules
   Author: [FIXME: author] [see http://docbook.sf.net/el/author]
Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
     Date: 08/10/2017
   Manual: Git Manual
   Source: Git 2.14.1
 Language: English

(The comments found at the beginning of the groff file "man7/gitsubmodules.7".)

NAME

gitsubmodules - mounting one repository inside another

SYNOPSIS

.gitmodules, $GIT_DIR/config

git submodule
git <command> --recurse-submodules

DESCRIPTION

A submodule is a repository embedded inside another repository. The submodule has its own history; the repository it is embedded in is called a superproject.

On the filesystem, a submodule usually (but not always - see FORMS below) consists of (i) a Git directory located under the $GIT_DIR/modules/ directory of its superproject, (ii) a working directory inside the superprojectcqs working directory, and a .git file at the root of the submodulecqs working directory pointing to (i).

Assuming the submodule has a Git directory at $GIT_DIR/modules/foo/ and a working directory at path/to/bar/, the superproject tracks the submodule via a gitlink entry in the tree at path/to/bar and an entry in its .gitmodules file (see gitmodules(5)) of the form submodule.foo.path = path/to/bar.

The gitlink entry contains the object name of the commit that the superproject expects the submodulecqs working directory to be at.

The section submodule.foo.* in the .gitmodules file gives additional hints to Gits porcelain layer such as where to obtain the submodule via the submodule.foo.url setting.

Submodules can be used for at least two different use cases:

1. Using another project while maintaining independent history. Submodules allow you to contain the working tree of another project within your own working tree while keeping the history of both projects separate. Also, since submodules are fixed to an arbitrary version, the other project can be independently developed without affecting the superproject, allowing the superproject project to fix itself to new versions only when desired.

2. Splitting a (logically single) project into multiple repositories and tying them back together. This can be used to overcome current limitations of Gits implementation to have finer grained access:

* Size of the git repository: In its current form Git scales up poorly for large repositories containing content that is not compressed by delta computation between trees. However you can also use submodules to e.g. hold large binary assets and these repositories are then shallowly cloned such that you do not have a large history locally.

* Transfer size: In its current form Git requires the whole working tree present. It does not allow partial trees to be transferred in fetch or clone.

* Access control: By restricting user access to submodules, this can be used to implement read/write policies for different users.

THE CONFIGURATION OF SUBMODULES

Submodule operations can be configured using the following mechanisms (from highest to lowest precedence):

* The command line for those commands that support taking submodule specs. Most commands have a boolean flag --recurse-submodules whether to recurse into submodules. Examples are ls-files or checkout. Some commands take enums, such as fetch and push, where you can specify how submodules are affected.

* The configuration inside the submodule. This includes $GIT_DIR/config in the submodule, but also settings in the tree such as a .gitattributes or .gitignore files that specify behavior of commands inside the submodule.

For example an effect from the submodulecqs .gitignore file would be observed when you run git status --ignore-submodules=none in the superproject. This collects information from the submodulecqs working directory by running status in the submodule, which does pay attention to its .gitignore file.

The submodulecqs $GIT_DIR/config file would come into play when running git push --recurse-submodules=check in the superproject, as this would check if the submodule has any changes not published to any remote. The remotes are configured in the submodule as usual in the $GIT_DIR/config file.

* The configuration file $GIT_DIR/config in the superproject. Typical configuration at this place is controlling if a submodule is recursed into at all via the active flag for example.

If the submodule is not yet initialized, then the configuration inside the submodule does not exist yet, so configuration where to obtain the submodule from is configured here for example.

* the .gitmodules file inside the superproject. Additionally to the required mapping between submodulecqs name and path, a project usually uses this file to suggest defaults for the upstream collection of repositories.

This file mainly serves as the mapping between name and path in the superproject, such that the submodulecqs git directory can be located.

If the submodule has never been initialized, this is the only place where submodule configuration is found. It serves as the last fallback to specify where to obtain the submodule from.

FORMS

Submodules can take the following forms:

* The basic form described in DESCRIPTION with a Git directory, a working directory, a gitlink, and a .gitmodules entry.

* "Old-form" submodule: A working directory with an embedded .git directory, and the tracking gitlink and .gitmodules entry in the superproject. This is typically found in repositories generated using older versions of Git.

It is possible to construct these old form repositories manually.

When deinitialized or deleted (see below), the submodulecqs Git directory is automatically moved to $GIT_DIR/modules/<name>/ of the superproject.

* Deinitialized submodule: A gitlink, and a .gitmodules entry, but no submodule working directory. The submodulecqs git directory may be there as after deinitializing the git directory is kept around. The directory which is supposed to be the working directory is empty instead.

A submodule can be deinitialized by running git submodule deinit. Besides emptying the working directory, this command only modifies the superprojectcqs $GIT_DIR/config file, so the superprojectcqs history is not affected. This can be undone using git submodule init.

* Deleted submodule: A submodule can be deleted by running git rm <submodule path> && git commit. This can be undone using git revert.

The deletion removes the superprojectcqs tracking data, which are both the gitlink entry and the section in the .gitmodules file. The submodulecqs working directory is removed from the file system, but the Git directory is kept around as it to make it possible to checkout past commits without requiring fetching from another repository.

To completely remove a submodule, manually delete $GIT_DIR/modules/<name>/.

WORKFLOW FOR A THIRD PARTY LIBRARY

# add a submodule
git submodule add <url> <path>

# occasionally update the submodule to a new version:
git -C <path> checkout <new version>
git add <path>
git commit -m "update submodule to new version"

# See the list of submodules in a superproject
git submodule status

# See FORMS on removing submodules

WORKFLOW FOR AN ARTIFICIALLY SPLIT REPO

# Enable recursion for relevant commands, such that
# regular commands recurse into submodules by default
git config --global submodule.recurse true

# Unlike the other commands below clone still needs
# its own recurse flag:
git clone --recurse <URL> <directory>
cd <directory>

# Get to know the code:
git grep foo
git ls-files

# Get new code
git fetch
git pull --rebase

# change worktree
git checkout
git reset

IMPLEMENTATION DETAILS

When cloning or pulling a repository containing submodules the submodules will not be checked out by default; You can instruct clone to recurse into submodules. The init and update subcommands of git submodule will maintain submodules checked out and at an appropriate revision in your working tree. Alternatively you can set submodule.recurse to have checkout recursing into submodules.

SEE ALSO

git-submodule(1), gitmodules(5).

GIT

Part of the git(1) suite