cual (6)

NAME

Cual - Cuyo Animation Language

Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the level description files (xxx.ld).

On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction. See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "example.ld". And of course, all the existing levels are examples.

Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de).

HOW IT WORKS

The level description is organized in sections. There is a global section and every level has its own section, which is a subsection of the global section. It is common practice to place each level in a separate file, which then basically starts by opening its section and ends by closing it.

A section is defined by name = {contents}. name is the name of the new section and contents contains the definitions that pertain to that section. This is a sequence of definitions of the form name = stuff. Here stuff can be {contents} as above, or it can be a single datum, or it can be a comma-separated list of data. Inside such a list, datum * number can be used as a shorthand for datum, ..., datum, i.e. a number-fold repetition of datum. A datum can be an identifier, a string (enclosed by '"'), a word, or a number. In place of a number <expression> can be used, where expression is an arbitrary expression made up from literal numbers, previously defined numeric data, and the operators +, -, *, / and %.

Definitions can also depend on versions. See section VERSIONING below.

Apart from definitions, a section can also contain cual definitions (see below). These have to be enclosed in << and >>.

Each blob has its own (main) Cual procedure which does the drawing and the animation stuff. The procedure only depends on the kind of the blob, that is, it is the same for blobs of the same kind. However each blob has its own instance of the variables.

In every game step, the procedure of each of the blobs is called once. (There are 12.5 game steps per second.) It has to draw the blob each time, even if nothing has changed. (However, there's an internal routine in cuyo which checks if the same is drawn as in the last step and which then supresses the drawing.)

There may be other procedures associated to a kind of blob, which are executed at special events, for example when a falling blob lands. In contrast to the main procedure, these event handlers are not allowed to draw anything. See section EVENT HANDLERS for a list of the existing events.

The name of the main procedure of a blob (the one which draws the blob) is the name of the kind of the blob. Normally, that name is the word listed after pics= entry in the .ld file; but if that "word" contains a dot, only the part before the dot makes up the name. (E. g. with pics=redblob.xpm,greenblob.xpm, the names are "redblob" and "greenblob".)

The name of an event handler procedure is the name of the kind, followed by a dot, followed by the event name. (E.g. "redblob.land" for the landing event of the redblob from above.)

[Explain the default procedures.]

LEVEL DATA

String valued data

name

The name of the level. This appears in the list of levels as well as in the level intro.

description

This is an optional further description of the level in its intro.

author

The name of the level author(s) for credit at the beginning of a level.

Identifier valued data

bgpic

Background picture (file name). If too small, placed at bottom. Defaults to none.

toppic

Appearance of the top border coming down (file name). Defaults to none.

explosionpic

Appearance of the explosions (file name). Has a default.

Number valued data

numexplode

The size that a group of blobs has to reach in order to explode. This is only the level-wide default. Each kind can override this. Whether the group does explode is also controlled by behaviour. See section VARIABLES AND CONSTANTS for details.

toptime

Time the border takes to come down, in number of game steps. Each game step lasts 80ms. The default value is 50 (i.e. one pixel every four seconds).

topoverlap

Placement of toppic relative to the actual border. More precisely, number of pixels the lower border of the picture is below the actual border. Defaults to the height of the picture.

topstop

When the border comes down at the end of the level, number of pixels it should stop before the bottom. Set this to the same value as topoverlap if you want your toppic to be comletely visible at the end. Defaults to 0.

chaingrass

Must be 0 or 1. If set to 1, chain reactions are necessary to kill the grass. Defaults to 0. More precisely, chaingrass only controls the default for behaviour for grass blobs. See section VARIABLES AND CONSTANTS for details.

mirror

Must be 0 or 1. If set to 1, the level appears upside-down. Defaults to 0.

randomfallpos

Must be 0 or 1. If set to 1, the initial fall position is randomized horizontally. Defaults to 0.

neighbours

Determines in which directions the blobs can connect to each other in order to form groups. This is only the level-wide default. Each kind can override this. See section VARIABLES AND CONSTANTS for values. Defaults to neighbours_rect.

randomgreys

The expected time between two randomly appearing greys in game steps (80ms). Use -1 for none at all, which is the default.

nogreyprob

The probability that a grey does not appear. See greyprob and colourprob in section KIND DATA for details. The default is 0.

aiu_color, aiu_grass, aiu_grey, aiu_two_above, aiu_monochromic_vertical, aiu_height

Parameters for the AI player's utility function. Default respectively to <10*(number of kinds)>, 20, 10, <aiu_color/2>, <aiu_color>, and 10. See section THE AI UTILITY FUNCTION for details.

Colour valued data

(A colour is an RGB triple of numbers between 0 and 255.)

bgcolor

The background colour. Defaults to white.

textcolor

Colour of any text. This includes the beginning-of-level information, message()s, and score. Defaults to a certain shade of dark grey.

topcolor

The colour of the top border comming down (where not determined by toppic). Defaults to a certain shade of light grey.

Other data

startdist

Distribution of blobs at the beginning of the level. It is a list of strings, the format of which is described in the section STARTDIST.

pics, greypic, startpic, emptypic

Lists of kinds. These can be either file names referring to the picture to be used, or declarations of kinds that have to be defined later on. The different keywords (e.g. pics, emptypic) define different defaults. In fact, only the first three may be real lists, emptypic is limited to exactly one entry. In these lists, it is advisable to use * whenever possible. Besides being shorter to write, it also speeds up loading of the level and cuts down memory usage. This is because cuyo does some initializations only once for each entry with multiplier.

The intentions of these lists are normal blob kinds resp. grey blob kind resp. grass blob kind resp. nothing-blob. However, the only differences between pics, greypic and startpic are the default values for behaviour, colourprob, goalprob, greyprob, versions and distkey (see there). All of these can also be overridden individually. Also, the default drawing code is different. (The default drawing code for startpic does not draw connections.)

kind

Each kind can have its own section. See KIND DATA below for the entries of that section.

KIND DATA

numexplode, neighbours

Defining these data in the section of a kind overrides the level-wide value for the kind. See section LEVEL DATA for a description of these data.

pics

A list of file names of pictures to be used for this kind. The nth entry can later be accessed in cual with file=n-1.

colourprob

The probability that this kind appears as one of the two steered falling blobs. More precisely, this is a nonnegative integer weight. For determining the actual probability, the value is divided by the sum of the colourprobs of all kinds. This sum must be positive. The default is 1 for kinds declared with pics= and 0 for all other kinds. The probability is also used for + in startdist. For more details see section STARTDIST.

goalprob

This affects the semantics of * in startdist in the same way, as colourprob does for +. The default is 1 for kinds declared with startpic= and 0 for all other kinds.

greyprob

The probability that this kind appears as a grey blob. This is similar to colourprob, but there is a difference: For greyprob, nogreyprob is included in the sum, so that it might happen that no blob appears at all. There is a notable difference between a positive nogreyprob and a positive greyprob in kind nothing, when several lines of grey blobs appear: In the latter case, empty blobs appear in the wall of greys, making holes. In the former case, the wall is made less high. Usually this is preferable. The default is 1 for kinds declared with greypic= and 0 for all other kinds. The value also affects the semantics of - in startdist. In this case, nogreyprob is not included in the sum.

versions

At the creation of a blob, its version variable is initialized. Usually, it is chosen at random from 0 to versions-1, but startdist provides the possibility to specify it exactly. See section STARTDIST for details. The default is 52 for kinds declared with startpic and 1 for all other kinds.

distkey

An alphanumerical key, which is used in startdist to identify this kind of blob. The default is A for kinds declared with startpic and undefined for all other kinds. See section STARTDIST for details.

CUAL DEFINITIONS

Inside << >>, variable and procedure definitions are expected.

procname = code ;

Defines a "procedure". The next section describes how code looks like. Example:

  redblob = {

    schema16; 0*;

    1; A,B,C; *;

  };

var varname1 [= def1 [: reapply]], varname2 [= def2 [: reapply]], ... ;

Defines variables with default values. If no default is specified, zero is used. See section VARIABLES AND CONSTANTS about the meaning of the default value and the optional suffix : reapply.

default varname1 = def1 [: reapply], varname2 = def2 [: reapply], ... ;

Changes the default for already defined variables. Again, the suffix : reapply is optional. This is useful to give to a single kind a different default for a variable than to the other kinds. Also, the default of a system variable can be changed this way.

CODE

A code fragment can be one of the following:

{ code; code; ...}

Executes one command after the other.

code, code, ...

This is useful for simple animations. Executes exactly one of the commands: In the n-th call, the n-th command is executed. After the last command, the first one is executed again. However, if one of the commands is "busy" (see section BUSIENESS), this one will be executed until it stops being busy, and only after that, the next command will be executed.

procname

Executes the procedure procname, which has to be already defined. The result is the same as if the code from procname would have been inserted in that place.

&procname

Executes the procedure procname; however, every instance of such a procname is the same. This concerns busieness and the state of an animation sequence. (See sections BUSIENESS and AMPERSAND-CALL.)

busy

Does nothing except being busy. (See section BUSIENESS.)

varname = expr

Sets the variable. See section VARIABLES AND CONSTANTS for details.

The same with +=, -=, *=, /=, %=, .+=, .-=.

Does what you would expect.

[ varname = expr ] code

Sets the variable varname to expr, executes code and then resets the variable to the old value.

number

A shortcut for file = number.

letter

A shortcut for pos = number, where different letters mean different numbers: A: 0, B: 1, ..., Z: 25, a: 26, ..., z: 51

*

Draw the icon specified by the variables kind, file and pos. May also draw only a part of the icon, if specified by the variable qu (see section VARIABLES AND CONSTANTS).

*@(position)

Like *, but draws the icon at some other position. This drawing is performed after all drawing by *. If *@ is used from several blobs, the further order of drawing is not specified. It is guaranteed, however, that at any given time this order is the same for all positions. (See section VARIABLES AND CONSTANTS for more details about @.)

@(position)*

Like *, but draws the icon at some other position. This drawing is performed before all drawing by *. If @* is used from several blobs, the further order of drawing is not specified. It is guaranteed, however, that at any given time this order is the same for all positions. (See section VARIABLES AND CONSTANTS for more details about @.)

if expr if-arrow if-code ;

if expr if-arrow if-code else [else-arrow] else-code ;

The arrows can be either "->" or "=>". If you use "->" arrows, it does exactly what you would expect. If the if-arrow is "=>", then once the expression gets true, the if-code will be executed every subsequent time (without testing the condition), as long as it is "busy". For more details see section BUSIENESS. If the else-arrow is "=>", then once the expression gets false, the else-code will be executed every subsequent time as long as it is busy. The else-arrow may only be omitted, if the if-arrow is "->". Then the else-arrow also is "->". (But this might change in the future.)

switch {

  expr1 arrow1 code1 ;

  expr2 arrow2 code2 ;

  ...

}

The arrows can be either "->" or "=>". Does the same as:

  if expr1 arrow1 code1

  else => if expr2 arrow2 code2

  ...

The last expr may be omitted. This is equivalent to setting it to true.

bonus(expr)

The player gets expr bonus points.

message(String)

The string is displayed (blinking) on the screen. To be used together with bonus(...). Example:

  bonus(50);

  message("You get 50 bonus points");

explode

Makes the blob explode. For the next 8 steps or so, the blob is still what it was before, but the explosion is drawn over the graphics. After that, it's changed to a nothing-blob.

lose

The players immediately lose the level.

sound(Filename)

Plays the given sound file.

You can also omit the code completely. Then, of course, it does not do anything. This can be useful as part of ,-sequences.

There's a shortcut for drawing: You may omit the ";" between a number, a letter and the "*".

EXPRESSIONS

The only data type in cual is int. Bools are represented by 0 and 1, like in C. (And any number other than 0 is interpreted as true, if a boolean is expected.)

Of course, variables, constants and numbers are expressions, and you can use parentheses. There are the following operators (listed here in order of increasing precedence):

||

Boolean or

&&

Boolean and

==, !=, <, >, <=, >=

Comparison

==..

A special comparison

!

Boolean not

+, -

Add, substract

:

Special operator

*, /, %

Multiply, divide, modulo

&, |, .+, .-

Bitwise and, bitwise or, setting of bits (same as bitwise or), unsetting of bits

-

Unary minus

.

Testing of bits (a.b is the same as a&b != 0)

/ and % work mathematically correct and do not make funny changes when the sign of the numerator changes. More specifically, if b is positive, then a/b is the largest integer n such that n*b<=a. If b is negative, then a/b is the largest integer n such that n*b>=a. In both cases a%b is such that (a/b)*b+a%b = a. Examples:

13/5=2 # 13%5=3
-13/5=-3 # -13%5=2
13/-5=-3 # 13%-5=-2
-13/-5=2 # -13%-5=-3

The following are the special operators:

expr1 == expr2 .. expr3

Is true, if expr1 lies between expr2 and expr3. You may also omit one of expr2 and expr3. (Then, it does the same as <= resp. >=.) The precedence implies that x==y==2..3 is the same as x==(y==2..3) and is neither (x==y)==2..3 nor x==(y==2)..3. Note that this operator might change in the future. (I plan to make something like "expr in set" in Pascal.)

expr1 : expr2

Is true (that is, 1) with probability expr1/expr2

neighbour_pattern

neighbour_pattern is a sequence of six or eight characters 0, 1 and ?. It is true if the sequence fits to the neighbour sequence of the blob. The neighbour sequence is a string of "0"s and "1"s with a "1" for each neighbour of the same kind, starting above and going clockwise. This way, you get a string of "0"s and "1"s (six or eight, depending on wether this level is in hex mode).

Example: 1???0??? is true iff the blob above this blob is of the same kind and the blob below it is of different kind.

For an empty blob the semantics is slightly different: If in some direction there is no neighbour, because the field ends there, the entry in the neighbour sequence is 1 nevertheless. So for an empty blob 1???0??? is true, iff the blob above this blob does not exist or is empty as well, and the blob below this blob exists and is not empty.

If some blob changes its kind during a step, the expression will still test the neighbours as they were at the beginning of the step. (See the section VARIABLES AND CONSTANTS for details.)

The following functions exist:

rnd(expr)

Returns a random value between 0 and expr-1

gcd(expr1, expr2)

Returns the greatest common divisor of expr1 and expr2

VARIABLES AND CONSTANTS

The following kinds of variables and constants exist:

---

User defined variables (see section CUAL DEFINITIONS). At the start of the level (or at the creation of the blob) the value is the default value you provided. If you supplied the default with : reapply, whenever a blob's kind changes, the value of the variable is also set to the default of the new kind. There is a subtlety: This only happens if the new value of kind is in fact different from the old one.

---

System variables. These variables are always defined and have special meanings, e.g. file and pos. Some of them are read-only.

---

User defined constants. These are defined in the main .ld part, not in cual (not inside << >>).

---

System constants. Some of them depend on properties of the level, some are really constant.

Of each variable, there's one instance in each blob. Normally, you access the instance in your own blob, but with the following syntax, you can access variables of other blops:

  varname@@(x, y; side)

  varname@@(x; side)

  varname@@(; side)

  varname@(dx, dy; side)

  varname@(dx; side)

  varname@()

If x and y are given, these are absolute coordinates in the grid of blops, that is the variable is taken from the blob with loc_x=x and loc_y=y (see under The system variables). If only x is given, it specifies one of the two blobs that are currently falling. If there is only one such blob left, because the other one got stuck on some tower, the remaining blob's coordinate is 0. Otherwise one of the two has coordinate 0, the other 1.

In the @ variants, the coordinates are relative to the current blob. The variant @@(; side) refers to the semiglobal blob, the variant @() to the global blob (See section THE GLOBAL BLOB). The extra part ; side is optional and specifies the side of the game. This is only meaningful in two-player mode. side = < specifies the left player, side = > the right player, side = = the player to which the current blob pertains, and side = ! the other player. @() and @@() can also be given as @ respectively @@.

This can be done for both, reading and writing variables. It also works for system variables (but not for constants).

In hex mode levels, for odd dx, dy should be a "half integer", that is a number ending in ".5". This is the only place in Cual where non-integers appear. Especially, ".5" is not allowed in composite expressions. Therefore, also integer dy is always allowed. If a half-integer is expected and an integer is given, it is assumed to be rounded to above, that is 5 then represents 4.5 and -5 represents -5.5.

Caution: With mirror=1 the absolute and the relative coordinates use different coordinate systems. Handle with extreme care.

Accessing foreign variables is not as easy as it might look at first glance; it might easily introduce a dependence of the internal order of execution of the blob codes. For this reason,

---

reading variables with @ or @@ always returns the value of the variable it had at the beginning of the current step, that is, before any of the blob codes has been executed.

---

when writing variables with @ or @@, the write operation will only be executed at the end of the current step. (The write operations are stored in a kind of queue.)

This is also true if a blob accesses its own variables with @(0,0).

The operators +=, -=, etc. are also performed in the future if the left hand side is an @-variable. (To be more precice, the right hand side is calculated instantanousely.)

For illustration, look at the following six statements:

1)	X += 1
2)	X@(0, 0) += 1
3)	X = X + 1
4)	X = X@(0, 0) + 1
5)	X@(0, 0) = X + 1
6)	X@(0, 0) = X@(0, 0) + 1

Only 1) and 3) do the same; they simply increment X by 1. Statement 4) sets X to one more than it was at the beginning of the step. Statements 2), 5) and 6) cause the value of X to be changed in the future (after the current step): X is set to one more than:

2)

the value of X just before the change (that is, X is incremented in the future),

5)

the current value of X,

6)

the value of X at the beginning of the step.

Some more details

---

Whenever you try to access a variable at a location which doesn't exist, you will get the default value. If default values depend on the kind, the default pertaining to the blob executing the code is used. This may change in the future.

---

Changing a variable which doesn't exist does nothing (and does not result in an error).

[Add explanation of time slices; roughly:

@-access of variables in reality don't access the value at the beginning/end of the game step, but of the time slice. The call of the main procedure of all blobs happens in the same time slice, but each other kind of event has its own time slice.]

The system variables

file

Specifies the file number from which to take the icon that is drawn by "*". This variable is reset to 0 before the drawing procedure is executed.

pos

Specifies the position in the file of the icon that is drawn by "*". This variable is reset to 0 before the drawing procedure is executed.

kind

The kind of the blob. There are constants for the possible values of this variable. If you change the kind, you should be aware of three things:

---

Expressions like "001???01" test the neighbour pattern at the beginning of the current step. So the change of the variable kind will not be reflected.

---

In the current step, the program to draw the blob has already been invoked (it might even be the program which changed this variable); so in this step, the blob will still look like one of the old kind. However, if things are drawn after the kind has been changed, icons from the new kind are taken.

---

Defaults of the new kind that are declared with : reapply are applied. This happens at the same time that kind changed, but only if the new kind is different from the old one.

version

Is assigned a hopefully distinctive value at the blob's creation. See versions in section KIND DATA for details.

qu

Tells "*" which part of the icon to draw. It's possible to draw the whole icon, or only one of its quarters. If a quarter is drawn, you may specify independently which of the quarters to take and at which position to draw it. Use the constants (see below). This variable is reset to "draw all" before the drawing procedure is executed.

out1, out2

Set these Variables for debug output. The values will be printed on top of the blob. These variable are reset to "output nothing" before the drawing procedure is executed. (In fact, "output nothing" is one special big value.)

inhibit

Set this variable to a sum of the constants DIR_...; this will inhibit that this blob connects into the given directions. This is not for the graphics but for the calculation of the connected components and the explosions.

behaviour

This is a bit field. Refer to The Constants below for the meaningful of its bits. The default is calculate_size+explodes_on_size for normal blobs, explodes_on_explosion+explodes_on_chainreaction for grey blobs, floats for the empty blob and goalblob+explodes_on_explosion+explodes_on_chainreaction or goalblob+explodes_on_chainreaction (depending on whether chaingrass is set) for grass blobs.

falling_speed, falling_fast_speed

These variables are only used in the semiglobal blobs. They define the vertical speed of the steered falling blobs. The unit is pixels per game step. The defaults are 6 and 32.

The system read-only variables

time

The number of time steps since the level was started.

turn

Is 1 resp. 2 if the blob is falling and just being turned by the user and 0 otherwise. (1 in the first turning step, 2 in the second one.) Be aware that if the user presses the turn key fast several times, some of these steps may be omitted. (Use the turn event if you want to be sure that a program block is executed once for every turn.)

connect

Contains internal data. Will be removed. Probably.

size

The size of the component of the blob. (That is, how many blobs are connected.)

basekind

The value of the constant generated for the name of the kind of the blop. Example:

  pics = orange, pear, apple * 3, banana, apple

Here, all four kinds apple have the same value for basekind, and this value is apple.

loc_x, loc_y

The absolute coordinates of the blob. (0,0) = top left corner

loc_xx, loc_yy

The absolute coordinates of the blob in pixels. This is not always the same as loc_x*32 and loc_y*32, particularly for the steered falling blobs.

loc_p

The player of the blob (1 or 2)

falling

true, if the blob is falling. (Falling in the sense of steered by the player. Grey blobs are not falling in that sense.)

falling_fast

true, if the blob is falling fast, that is, the user pressed the down key.

players

The number of players.

exploding

When the blob is exploding, the position in the explosion animation (1 to 8); 0 else.

Currently, there is one exception: if the explosion has been triggered by the explode command, then exploding will have value 1 only after the current game step [more precisely: time slice; fix that]. Reason: when reading exploding@(x,y), we maybe don't know yet that the other blob calls explode.

The Constants:

Constants for behaviour:

goalblob

Set goalblob if this blob should act like grass: You will have to get rid of it to win the level and making this blob explode will give more points.

calculate_size

When this bit is set, size will be regularly updated to the sum of weight in the connected component.

explodes_on_size

When this bit is set, a connected component explodes, when it has size>=numexplode.

explodes_on_explosion, explodes_on_chainreaction

When these bits are set, the blob explodes whenever an explosion that was triggered by explodes_on_size happens in its neighbourhood. explodes_on_chainreaction refers to those triggering explosions that are the second or later part of a chain reaction. explodes_on_explosion refers to the other ones.

floats

When this bit is set, the blob keeps its vertical position even if there is an empty blob below. This bit has no effect on the steered falling blobs.

Constants for kind:

<name of kind of blob>

For each kind of blob, there's one constant with the name of that kind. Use it to check if a blob is of that kind using kind@(x,y) == aKind or to change to that kind using kind = aKind. See kind under The system variables for the side-effects of setting kind.

Sometimes it is necessary to perform arithmetic on kinds, for example when several have been declared using the * multiplier. The values of the constants are successive in the order, in which the kinds have been declared. When a name is used several times, the first use defines the value. Example:

  startpic = apple, orange

  pics = orange, pear, apple * 3, banana

  greypic = pineapple

This initializes 2 kinds with the defaults for startpic, 6 kinds with the defaults for pics, and 1 kind with the defaults for greypic. The value of the constant orange is 1 more than that of apple, pear is 2 more than orange, banana is 4 more than pear and pineapple is 1 more than banana. We do not specify what these values actually are.

This constant also exists for the empty kind, if one has been declared using emptypic. In this case the value's relation to the other values is not specified at all.

global, semiglobal

Denote the kind of the global, respectively semiglobal, blob.

nothing

Is the same as the constant for the empty kind. Is provided, because sometimes, you don't have an empty kind, but you still need to test if a blob is empty.

outside

The value of kind if the coordinates are outside of the game board.

Constants for neighbours:

neighbours_rect

A blob connects up, down, left, and right. This is the default.

neighbours_diagonal

A blob connects diagonally.

neighbours_hex6

When used in the level-wide neighbours, this sets hex mode. A blob connects up, down, left with a slight upwards shift, left with a slight downwards shift, right with a slight upwards shift, and right with a slight downwards shift.

neighbours_hex4

When used in the level-wide neighbours, this sets hex mode. A blob connects left with a slight upwards shift, left with a slight downwards shift, right with a slight upwards shift, and right with a slight downwards shift.

neighbours_knight

A blob connects in knight moves (Two forward and then one sideways. Forward is one of up, down, left or right. Sideways is perpendicular to forward. This makes a total of eight directions.).

neighbours_eight

Combines neighbours_rect with neighbours_diagonal.

neighbours_3D

A more obscure mode created especially for 3d.ld. When used in the level-wide neighbours, this sets hex mode. A blob connects up, down, two (but not one) to the left, and two to the right. In even columns it also connects right with a slight upwards shift. In odd columns it also connects left with a slight downwards shift.

neighbours_none

A blob does not connect at all.

Constants for qu:

Q_ALL

Value for qu, which means "draw the complete picture".

Q_TL, Q_TR, Q_BL, Q_BR

Values for qu. "TL" means draw top-left quarter, etc. (See the "*" command in the Code section.)

Q_SRC_DST

SRC and DST may be TL, TR, BL, BR. Take quarter SRC and draw it at position DST.

Miscellanious constants:

DIR_XX

To be used with the variable inhibit to prevent the blob connecting in the given directions. XX can be U, D, L, R (horizontal and vertical); UL, UR, DL, DR (diagonal); UUL, UUR, DDL, DDR, LLU, LLD, RRU, RRD (knight); F, B (3d)

VERSIONING

Sometimes it is necessary to define a level slightly differently for different purposes. For example you might need to decrease numexplode for the two-player version lest it becomes unplayable. The difficulty settings from cuyo's main menu provide another example.

This is done by qualifiing a definition with the versions it should apply to. It is best explained by an example:

  numexplode = 8

  numexplode[2] = 6

  numexplode[1,hard] = 10

This specifies that normally numexplode should be 8. In two-player mode it should be 6. In one-player hard mode it should be 10. Here the specifiers 2 for two-player mode, 1 for one-player mode and hard for hard mode are used. Along with easy for easy mode these are all predefined specifiers intended for levels. Additionally (and for internal purposes), there are specifiers for the level tracks: main, all, game, extreme, nofx, weird, and contrib.

Furthermore, you can make up and use your own specifiers. In order for them to take effect, though, you have to give cuyo additional information about the current version. This is done on the command line using the --version option. For example

  cuyo --version=hard,geek

Specifies both hard version (you can change that in the menu) and version "geek", which is not predefined.

There are several constraints to be observed:

---

All versions of a definition must be made before the first use of the thing defined. As sometimes it is not obvious where the defined thing is used (for example startpic uses a previous greypic by assigning successive numbers to kinds), it is best to group all these versions into one block.

---

A given version also applies to every more specialized version, for which no definition is given. In the above example, numexplode is set to 6 in two-player hard mode and in two-player easy mode as well.

All resulting conflicts must be resolved. For example, if you make a definition for [2] and one for [hard], you must also make a definition for [2,hard] (or, equivalently, for [hard,2]), because otherwise it would be ambiguous which of the two former should apply in two-player hard mode.

---

Cuyo knows that easy and hard exclude each other. Consequently, it is unnecessary (and indeed prohibited) to give an [easy,hard] definition, even if both [easy] and [hard] are given. The same holds for 1 and 2, and for level tracks.

---

Furthermore, cuyo knows that 1 and 2 are exhaustive: There is no mode which is neither single-player nor two-player. (The human-versus-AI mode counts as two-player as far as cual is concerned.) Therefore, if there are definitions for both, it is unnecessary, (and again illegal) also to define a version without any of both. For example, if [1,de] and [2,de] are given, [de] must be omitted. Alternatively, you could of course give [1,de] and [de] or [de] and [de,2]. The level track specifiers are exhaustive as well.

BUSIENESS

(No, not Business ;-)

Busieness is a concept to make it easier to implement simple animated sequences which are triggered by certain events. Each code fragment has an internal state which tells if it is busy.

---

Normal statements like assignments are never busy.

---

A chain of commands separated by "," is busy as long as not all of the commands have been executed.

---

code1 ; code2 is busy as long as at least one of code1 and code2 are busy.

Here's an example of how to use busieness for an animation which appears at random intervals:

  switch {

    1:100 => {B*, C*, D*, E*};

    -> A*;

  };

This code fragment normally draws the icon at position A (0). But in each step, with a probability of 1/100, an animation sequence consisting of icons B, C, D and E is started. With a normal arrow ("->") after the "1:100", after the step in which B has been drawn, the probability would be 99/100 that A is drawn again. But with the double arrow, the switch statement won't switch back to A until the animation has terminated.

(Btw: It doesn't matter if there's a "->" or a "=>" before the "A*"; A* isn't busy anyway.)

THE GLOBAL BLOB

Apart from the normal blobs which you can see on screen, there's one global blob (for the whole game, not one for each player), which, well, isn't really a blob, but behaves a bit like it. It has its own set of variables, and it can have a program which is run once every step. To define such a global program, use global=code. However, the global variables do exist even if you don't define global code. See section VARIABLES AND CONSTANTS on how to access them. Note that the global blob is always executed before any of the normal blobs.

There are also semiglobal blobs. There is one for each player. These are programmed with semiglobal=code.

EVENT HANDLERS

The following events exist:

init

Is called only once, when the blob gets into life, just before the first time its main drawing routine is called.

turn

Is called for falling blobs each time the user presses the turn key.

land

Is called when the steered blob lands.

changeside

Is called when a blob moves from one player to the other, just after the blob has arrived at the new player.

connect

Is called when the connection of blobs is recalculated.

row_up

Is called when a player gets a row from the other side. Is only called for the semiglobal blob, though.

row_down

Is called when a player gives a row to the other side. Is only called for the semiglobal blob, though.

keyleft, keyright, keyturn, keyfall

Are called when the player presses the left, right, turn or fall key. Are only called for the steered falling blobs and the semiglobal blob, though.

THE LIFE OF A BLOB

Normal blobs come into life at the beginning of the game, or they fall into life: either as colored blobs, steered by the user, or as grey blobs. When a blob moves (by gravitiy or when rows go from one player to another), it takes its variables with it. When a blob explodes, it does not stop existing. Rather, it transforms into an empty blob. That's important for the variables: The empty blob still has all the variables set to the values they had before; only its kind is different. Empty blobs are everywhere where there's no other blob. (However, the falling blobs steered by the user are in some sense "above" everything else; there are empty blobs beneath them.)

The life of empty blobs is different from the one of normal blobs. Empty blobs are not affected by gravity, and they often start or stop existing. For example, when a single grey blob is falling down, the empty blob below it stops existing when the grey blob arrives and a new empty blob starts existing when the grey blob moves on. There is only one situation in which empty blobs move: When a row moves from one player to the other, and everything moves up resp. down, the empty blobs move, too.

STARTDIST

The format of the startdist field is rather complicated. On the plus side, this means that many things can be done with little effort. We first describe the single-character format, which, at the time of this writing, has sufficed for all needs. After that, we describe the general format as an extension.

Every line of the startdist describes one row of blobs in the level's initial state. The lines are aligned to the bottom and the topmost lines come first (normal reading order). Each line must contain exactly 10 or exactly 20 characters. In a line of length 20 the first 10 characters describe the left player, the second 10 characters describe the right player. A line of length 10 describes both players. Hence, each character describes one blob. The semantics are:

.

An empty blop.

+, -, *

A blop chosen at random according to colourprob, respectively greyprob, respectively goalprob. The value of nogreyprob has no influence.

0..9, A..Z, a..z

These characters denote a specific kind. If the character matches the distkey of some kinds, the first of these is chosen. More generally, these characters are ordered such that "9" comes before "A" and "Z" comes before "a". In this order, the maximal distkey, which does not come after the character, specifies the blob's kind. The difference between the character and the distkey then specifies the blob's version.

Example 1: In the special case, where the character exactly matches a distkey, version is set to 0.

Example 2: Suppose kind apple has distkey = "A", kind orange has distkey = "O" and no further distkeys exist. Then the character "C" denotes an apple with version=2, the character "N" denotes an apple with version=13, the character "O" denotes an orange with version=0, the character "S" denotes an orange with version=4, the character "a" denotes an orange with version=12, and the character "8" does not denote anything (and hence is illegal).

In this way, startdist can reference 62 kind/version combinations directly (and more at random). Because this might at some time not be enough, the multichar extension has been introduced. In this case, each blob is described by more than one character. However, the number of characters per blob must be the same for all keys. Hence, the lengths of startdist lines then must be this number multiplied by 10 or by 20. Every multicharacter combination starting with ".", "+", "-", or "*" is treated as the corresponding character in single-character format. All other character combinations are treated as numbers in base 62 representation. Here, "A" to "Z" are digits with decimal value 10 to 35, and "a" to "z" are digits with decimal value 36 to 61. Leading spaces are allowed instead of zeroes (however, the all-space string is forbidden). The maximal distkey which (as a number) is not larger than the number given in startdist, specifies the blob's kind. The difference between the startdist number and the distkey then specifies the blob's version. In the case of multichar distkeys, the default for distkeys of kinds declared by startpic= is 10 in decimal.

For blops whose kinds are chosen at random (i.e. characters "+", "-", "*" in single-character startdists), cuyo tries to make these as different as possible. That means, by a certain heuristic, cuyo minimizes the number of neighbouring blobs of the same kind. "Neighbouring", of course, refers to the neighbours entry. inhibit and the calculate_size bit of behaviour have no effect (these are mutable during the lifetime of blobs, while at the time of startdist processing, no blob's lifetime has started yet). So the only way to influence the unneighbouring (if you really wish to do so), is by setting neighbours appropriately. (Of course, this possibility is even more limited, when you intend to set the calculate_size bit during the blob's lifetime.)

WHERE DO I PUT THE CUAL CODE?

Cual procedures and variables can be defined in different sections of the .ld files:

---

Outside of everything; that code is accessible from every level coming after that definition.

---

In the section of a level.

---

In the section of a kind.

This basically does what you expect. However, there's one thing you might want to know: Even if you define a variable inside a kind, every blob in that level will have that variable. The only effect of defining the variable in the section of a kind is that this kind is the only one which can access it.

AMPERSAND-CALL

To explain a bit what calling a procecure with an & means, here two examples:

Example 1:
<<
myblob = {

  ...

  switch {

    myvar -> { 0A*; 1; A,B,C,D; *; 2A*};

          -> { 0B*; 1; A,B,C,D; *; 2B*};

  };
};
>>

Example 2:
<<
anim = {1; A,B,C,D; *};


myblob = {

  ...

  switch {

    myvar -> { 0A*; &anim; 2A*};

          -> { 0B*; &anim; 2B*};

  };
};
>>

The difference between these examples is what happens when myvar changes. In example 1, the animation "A, B, C, D" will restart at the beginning (because the two animations are different ones); in example 2, the "same" animation is used in both cases, so the animation will simply continue. (Removing the ampersands from example 2 will turn the behaviour to the one of example 1.)

THE AI UTILITY FUNCTION

When deciding how to place the steered falling blobs, the AI player tries to maximize a certain utility function. Its value is the sum of the values for both steered falling blobs plus aiu_monochromic_vertical in case both blobs have the same color and they get placed vertically. The value for a single blob is the sum of the following:

---

For each new neighbour of blob, the neighbour utility.

---

aiu_two_above, if the blob is two above a blob of same kind.

---

aiu_height*20/(the blob's y coordinate).

The neighbour utility for a single new blob and a single one of its new neighbours is the sum of the following:

---

aiu_color, if the neighbour has the same kind as the blob.

---

aiu_grass, if the neighbour fulfills behaviour.goalblob.

---

aiu_grey, if the neighbour fulfills behaviour.explodes_on_explosion.

SEE ALSO

cuyo(6)

BUGS

Probably a lot. The following are just a few known ones:

There are several problems with busieness and that stuff. There are several situations in which Cual doesn't behave in the way I would like, and in other situations I don't know how Cual should behave.