sesman.ini (5)
NAME
sesman.ini - Configuration file for xrdp-sesman(8)DESCRIPTION
sesman.ini consists of several sections. Each section starts with the section name in square brackets, followed by a list of parameter=value lines. Following sections are recognized:- [Globals]
-
Global configuration
- [Logging]
-
Logging subsystem
- [Sessions]
-
Session management
- [Security]
-
Access control
- [X11rdp], [Xvnc], [Xorg]
-
X11 server settings for supported servers
- [Chansrv]
-
Settings for xrdp-chansrv(8)
- [SessionVariables]
-
Environment variables for the session
All parameters and values (except for file names and paths) are case
insensitive, and are described in detail below. If any parameter is
specified more than once, the last entry will be used. Options specified
outside their proper section will be ignored.
GLOBALS
Following parameters can be used in the [Globals] section.- ListenAddress=ip address
-
xrdp-sesman listening address. If not specified, defaults to 0.0.0.0
(all interfaces).
- ListenPort=port number
-
xrdp-sesman listening port. If not specified, defaults to 3350.
- EnableUserWindowManager=[true|false]
-
If set to 1, true or yes, this option enables user
specific startup script. That is, xrdp-sesman will execute the script
specified by UserWindowManager if it exists.
- UserWindowManager=filename
-
Name of the startup script relative to the user's home directory. If
present and enabled by EnableUserWindowManager, that script is
executed instead of DefaultWindowManager.
- DefaultWindowManager=filename
-
Full path to the default startup script used by xrdp-sesman to start a
session if the user script is disabled or missing.
LOGGING
Following parameters can be used in the [Logging] section.- LogFile=filename
-
Log file path. It can be either absolute or relative. If not specified,
defaults to ./sesman.log
- LogLevel=level
-
This option can have one of the following values:
CORE or 0 - Log only core messages. Those messages are logged regardless of the selected logging level.
ERROR or 1 - Log only error messages.
WARNING, WARN or 2 - Logs warnings and error messages.
INFO or 3 - Log errors, warnings and informational messages.
DEBUG or 4 - Log everything. If xrdp-sesman is compiled in debug mode, this options will output many more low-level messages.
- EnableSyslog=[true|false]
-
If set to 1, true or yes, this option enables logging to
syslog.
- SyslogLevel=level
-
Logging level for syslog. It can have the same values as LogLevel.
If SyslogLevel and LogLevel differ, the least verbose setting
takes effect for syslog.
SESSIONS
Following parameters can be used in the [Sessions] section.- X11DisplayOffset=number
-
The first X display number available for xrdp-sesman. This prevents
xrdp-sesman from interfering with real X11 servers. If not specified,
defaults to 10.
- MaxSessions=number
-
Sets the maximum number of simultaneous sessions. If not set or set to
0, unlimited session are allowed.
- KillDisconnected=[true|false]
-
If set to 1, true or yes, every session will be killed
within 60 seconds after the user disconnects.
- IdleTimeLimit=number
-
This option is currently ignored! Time limit before an idle
session is disconnected. If set to 0, automatic disconnection is
disabled.
- DisconnectedTimeLimit=number
-
Sets the time limit (in seconds) before a disconnected session is killed.
If set to 0, automatic killing is disabled.
- Policy=[Default|UBD|UBI|UBC|UBDI|UBDC]
-
Session allocation policy. By default, a new session is created
for the combination <User,BitPerPixel> when using Xrdp, and
for the combination <User,BitPerPixel,DisplaySize> when using Xvnc.
This behavior can be changed by setting session policy to:
UBD - session per <User,BitPerPixel,DisplaySize>
UBI - session per <User,BitPerPixel,IPAddr>
UBC - session per <User,BitPerPixel,Connection>
UBDI - session per <User,BitPerPixel,DisplaySize,IPAddr>
UBDC - session per <User,BitPerPixel,DisplaySize,Connection>
Note that the User and BitPerPixel criteria cannot be turned off. For Xvnc connections, DisplaySize is always enabled as well.
SECURITY
Following parameters can be used in the [Security] section.- AllowRootLogin=[true|false]
-
If set to 1, true or yes, enables root login on the
terminal server.
- MaxLoginRetry=number
-
The number of login attempts that are allowed on terminal server. If set
to 0, unlimited attempts are allowed. If not specified, defaults to
3.
- TerminalServerUsers=group
-
Only the users belonging to the specified group are allowed to login on
terminal server. If unset or set to an invalid or non-existent group,
login for all users is enabled.
- TerminalServerAdmins=group
-
This option is currently ignored! Only members of this group can
have session management rights.
- AlwaysGroupCheck=[true|false]
-
If set to 1, true or yes, require group membership even
if the group specified in TerminalServerUsers doesn't exist.
X11 SERVER
Following parameters can be used in the [X11rdp], [Xvnc] and [Xorg] sections.- param=string
-
Multiple param lines are supported. This first line specifies the
path to the X11 server executable. Following lines specify command line
arguments passed to the X11 server.
CHANSRV
Following parameters can be used in the [Chansrv] section.- FuseMountName=string
-
Directory for drive redirection, relative to the user home directory.
Created if it doesn't exist. If not specified, defaults to xrdp_client.
SESSIONS VARIABLES
All entries in the [SessionVariables] section are set as environment variables in the user's session.FILES
/etc/xrdp/sesman.iniSEE ALSO
xrdp-sesman(8), xrdp-sesrun(8), xrdp(8), xrdp.ini(5)For more info on xrdp see www.xrdp.org