config (5)

Leading comments

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man5/config.5ssl".)

NAME

config - OpenSSL CONF library configuration files

DESCRIPTION

The OpenSSL library can be used to read configuration files. It is used for the OpenSSL master configuration file openssl.cnf and in a few other places like files and certificate extension files for the x509 utility. OpenSSL applications can also use the library for their own purposes.

A configuration file is divided into a number of sections. Each section starts with a line [ section_name ] and ends when a new section is started or end of file is reached. A section name can consist of alphanumeric characters and underscores.

The first section of a configuration file is special and is referred to as the default section this is usually unnamed and is from the start of file until the first named section. When a name is being looked up it is first looked up in a named section (if any) and then the default section.

The environment is mapped onto a section called

.

Comments can be included by preceding them with the # character

Each section in a configuration file consists of a number of name and value pairs of the form name=value

The name string can contain any alphanumeric characters as well as a few punctuation symbols such as . , ; and _.

The value string consists of the string following the = character until end of line with any leading and trailing white space removed.

The value string undergoes variable expansion. This can be done by including the form $var or ${var}: this will substitute the value of the named variable in the current section. It is also possible to substitute a value from another section using the syntax $section::name or ${section::name}. By using the form $ENV::name environment variables can be substituted. It is also possible to assign values to environment variables by using the name ENV::name, this will work if the program looks up environment variables using the

library instead of calling getenv() directly.

It is possible to escape certain characters by using any kind of quote or the \ character. By making the last character of a line a \ a value string can be spread across multiple lines. In addition the sequences \n, \r, \b and \t are recognized.

OPENSSL LIBRARY CONFIGURATION

In OpenSSL 0.9.7 and later applications can automatically configure certain aspects of OpenSSL using the master OpenSSL configuration file, or optionally an alternative configuration file. The openssl utility includes this functionality: any sub command uses the master OpenSSL configuration file unless an option is used in the sub command to use an alternative configuration file.

To enable library configuration the default section needs to contain an appropriate line which points to the main configuration section. The default name is openssl_conf which is used by the openssl utility. Other applications may use an alternative name such as myapplicaton_conf.

The configuration section should consist of a set of name value pairs which contain specific module configuration information. The name represents the name of the configuration module the meaning of the value is module specific: it may, for example, represent a further configuration section containing configuration module specific information. E.g.

 openssl_conf = openssl_init

 [openssl_init]

 oid_section = new_oids
 engines = engine_section

 [new_oids]

 ... new oids here ...

 [engine_section]

 ... engine stuff here ...

The features of each configuration module are described below.

ASN1 OBJECT CONFIGURATION MODULE

This module has the name oid_section. The value of this variable points to a section containing name value pairs of OIDs: the name is the short and long name, the value is the numerical form of the Although some of the openssl utility sub commands already have their own section functionality not all do. By using the configuration module all the openssl utility sub commands can see the new objects as well as any compliant applications. For example:

 [new_oids]
 
 some_new_oid = 1.2.3.4
 some_other_oid = 1.2.3.5

In OpenSSL 0.9.8 it is also possible to set the value to the long name followed by a comma and the numerical

form. For example:

 shortName = some object long name, 1.2.3.4

ENGINE CONFIGURATION MODULE

This configuration module has the name engines. The value of this variable points to a section containing further configuration information.

The section pointed to by engines is a table of engine names (though see engine_id below) and further sections containing configuration information specific to each

Each

specific section is used to set default algorithms, load dynamic, perform initialization and send ctrls. The actual operation performed depends on the command name which is the name of the name value pair. The currently supported commands are listed below.

For example:

 [engine_section]

 # Configure ENGINE named "foo"
 foo = foo_section
 # Configure ENGINE named "bar"
 bar = bar_section

 [foo_section]
 ... foo ENGINE specific commands ...

 [bar_section]
 ... "bar" ENGINE specific commands ...

The command engine_id is used to give the

name. If used this command must be first. For example:

 [engine_section]
 # This would normally handle an ENGINE named "foo"
 foo = foo_section

 [foo_section]
 # Override default name and use "myfoo" instead.
 engine_id = myfoo

The command dynamic_path loads and adds an

from the given path. It is equivalent to sending the ctrls with the path argument followed by with value 2 and to the dynamic If this is not the required behaviour then alternative ctrls can be sent directly to the dynamic using ctrl commands.

The command init determines whether to initialize the

If the value is 0 the will not be initialized, if 1 and attempt it made to initialized the immediately. If the init command is not present then an attempt will be made to initialize the after all commands in its section have been processed.

The command default_algorithms sets the default algorithms an

will supply using the functions ENGINE_set_default_string()

If the name matches none of the above command names it is assumed to be a ctrl command which is sent to the

The value of the command is the argument to the ctrl command. If the value is the string then no value is sent to the command.

For example:

 [engine_section]

 # Configure ENGINE named "foo"
 foo = foo_section

 [foo_section]
 # Load engine from DSO
 dynamic_path = /some/path/fooengine.so
 # A foo specific ctrl.
 some_ctrl = some_value
 # Another ctrl that doesn't take a value.
 other_ctrl = EMPTY
 # Supply all default algorithms
 default_algorithms = ALL

EVP CONFIGURATION MODULE

This modules has the name alg_section which points to a section containing algorithm commands.

Currently the only algorithm command supported is fips_mode whose value should be a boolean string such as on or off. If the value is on this attempt to enter

mode. If the call fails or the library is not capable then an error occurs.

For example:

 alg_section = evp_settings

 [evp_settings]

 fips_mode = on

NOTES

If a configuration file attempts to expand a variable that doesn't exist then an error is flagged and the file will not load. This can happen if an attempt is made to expand an environment variable that doesn't exist. For example in a previous version of OpenSSL the default OpenSSL master configuration file used the value of which may not be defined on non Unix systems and would cause an error.

This can be worked around by including a default section to provide a default value: then if the environment lookup fails the default value will be used instead. For this to work properly the default value must be defined earlier in the configuration file than the expansion. See the

section for an example of how to do this.

If the same variable exists in the same section then all but the last value will be silently ignored. In certain circumstances such as with DNs the same field may occur multiple times. This is usually worked around by ignoring any characters before an initial . e.g.

 1.OU="My first OU"
 2.OU="My Second OU"

EXAMPLES

Here is a sample configuration file using some of the features mentioned above.

 # This is the default section.
 
 HOME=/temp
 RANDFILE= ${ENV::HOME}/.rnd
 configdir=$ENV::HOME/config

 [ section_one ]

 # We are now in section one.

 # Quotes permit leading and trailing whitespace
 any = " any variable name "

 other = A string that can \
 cover several lines \
 by including \\ characters

 message = Hello World\n

 [ section_two ]

 greeting = $section_one::message

This next example shows how to expand environment variables safely.

Suppose you want a variable called tmpfile to refer to a temporary filename. The directory it is placed in can determined by the the

or environment variables but they may not be set to any value at all. If you just include the environment variable names and the variable doesn't exist then this will cause an error when an attempt is made to load the configuration file. By making use of the default section both values can be looked up with taking priority and /tmp used if neither is defined:

 TMP=/tmp
 # The above value is used if TMP isn't in the environment
 TEMP=$ENV::TMP
 # The above value is used if TEMP isn't in the environment
 tmpfile=${ENV::TEMP}/tmp.filename

Simple OpenSSL library configuration example to enter

mode:

 # Default appname: should match "appname" parameter (if any)
 # supplied to CONF_modules_load_file et al.
 openssl_conf = openssl_conf_section

 [openssl_conf_section]
 # Configuration module list
 alg_section = evp_sect

 [evp_sect]
 # Set to "yes" to enter FIPS mode if supported
 fips_mode = yes

Note: in the above example you will get an error in non

capable versions of OpenSSL.

More complex OpenSSL library configuration. Add

and don't enter mode:

 # Default appname: should match "appname" parameter (if any)
 # supplied to CONF_modules_load_file et al.
 openssl_conf = openssl_conf_section

 [openssl_conf_section]
 # Configuration module list
 alg_section = evp_sect
 oid_section = new_oids

 [evp_sect]
 # This will have no effect as FIPS mode is off by default.
 # Set to "yes" to enter FIPS mode, if supported
 fips_mode = no

 [new_oids]
 # New OID, just short name
 newoid1 = 1.2.3.4.1
 # New OID shortname and long name
 newoid2 = New OID 2 long name, 1.2.3.4.2

The above examples can be used with with any application supporting library configuration if ``openssl_conf'' is modified to match the appropriate ``appname''.

For example if the second sample file above is saved to ``example.cnf'' then the command line:

 OPENSSL_CONF=example.cnf openssl asn1parse -genstr OID:1.2.3.4.1

will output:

    0:d=0  hl=2 l=   4 prim: OBJECT            :newoid1

showing that the

``newoid1'' has been added as ``1.2.3.4.1''.

BUGS

Currently there is no way to include characters using the octal \nnn form. Strings are all null terminated so nulls cannot form part of the value.

The escaping isn't quite right: if you want to use sequences like \n you can't use any quote escaping on the same line.

Files are loaded in a single pass. This means that an variable expansion will only work if the variables referenced are defined earlier in the file.

SEE ALSO

x509(1), req(1), ca(1)