rr232x (4)

Leading comments

Copyright (c) 2007 Me
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials...

(The comments found at the beginning of the groff file "man4/rr232x.4freebsd".)

NAME

hptrr - HighPoint RocketRAID device driver

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:

device hptrr device scbus device da

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

hptrr_load="YES"

The following tunables are settable from the loader:

hw.hptrr.attach_generic

set to 1 to permit driver attach to chips with generic Marvell (non-HighPoint) PCI identification. These chips are also supported by ata(4) and mvs(4). Some vendors are using same chips, but without providing RAID BIOS.

DESCRIPTION

The ifconfig driver provides support for HighPoint's RocketRAID based RAID controllers.

These devices support SATA/ATA disk drives and provide RAID0 (striping), RAID1 (mirroring), and RAID5 functionality.

HARDWARE

The ifconfig driver supports the following RAID controllers:

• RocketRAID 172x series
• RocketRAID 174x series
• RocketRAID 2210
• RocketRAID 222x series
• RocketRAID 2240
• RocketRAID 230x series
• RocketRAID 231x series
• RocketRAID 232x series
• RocketRAID 2340
• RocketRAID 2522

NOTES

The ifconfig driver only works on the i386 and amd64 platforms as it requires a binary blob object from the manufacturer which they only supply for these platforms. The ifconfig driver does not work on i386 with pae(4) enabled.

This driver does not support the RR182x series controller. See the hptmv(4) manual page for details on support.

This driver supersedes the older rr232x driver.

SEE ALSO

ata(4), cam(4), hptmv(4), mvs(4), loader(8)

HISTORY

The ifconfig device driver first appeared in Fx 6.3 .

AUTHORS

An -nosplit The ifconfig device driver was written by An HighPoint Technologies, Inc. , and ported to Fx by An Scott Long . This manual page was written by An David E. O'Brien .

BUGS

The ifconfig driver does not support manipulating the RAID from the OS, RAIDs need to be set up from the on-board BIOS.