geom_map (4)
Leading comments
Copyright (c) 2011 Aleksandr Rybalko All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or ...
NAME
geom_map - GEOM module that maps defined items as separate partitionsSYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:device geom_map
DESCRIPTION
The ifconfig framework provides support for mapping defined parts of the media. Basically it is helpful for embedded devices where in the one continuous flash are loader, kernel and rootfs parts. ifconfig allows making them available as separate parts and protects the loader from being overwritten.At boot time ifconfig partitions are listed (only with bootverbose) as:
MAP: 0x30000, data=0x30000 "/dev/map/bootloader" MAP: 30000x10000, data=0x10000 "/dev/map/factory" MAP: 40000x7a0000, data=0x7a0000 "/dev/map/upgrade" MAP: search key ".!/bin/sh" from 0x100000, step 0x10000 MAP: 40000x110000, data=0x110000 "/dev/map/kernel" MAP: search key ".!/bin/sh" from 0x100000, step 0x10000 MAP: 150000x690000, data=0x690000 "/dev/map/rootfs" MAP: 7e0000x20000, data=0x20000 "/dev/map/config"
The current ifconfig configuration can be accessed with the following sysctl(8) nodes: kern.geom.conftxt , kern.geom.confxml and kern.geom.confdot or by using ``geom map list ''
# sysctl -n kern.geom.conftxt 0 MD md0 10485760 512 u 0 s 512 f 0 fs 0 l 10485760 t malloc 0 DISK cfid0 8388608 4 hd 0 sc 0 1 MAP map/config 131072 4 i 5 o 8257536 entry 0 dsize 131072 1 MAP map/rootfs 6881280 4 i 4 o 1376256 entry 0 dsize 6881280 2 UNCOMPRESS map/rootfs.uncompress 18677760 512 1 MAP map/kernel 1114112 4 i 3 o 262144 entry 0 dsize 1114112 1 MAP map/upgrade 7995392 4 i 2 o 262144 entry 0 dsize 7995392 1 MAP map/factory 65536 4 i 1 o 196608 entry 0 dsize 65536 1 MAP map/bootloader 196608 4 i 0 o 0 entry 0 dsize 196608
Driver configuration can be done in device.hints5. List of used parameters:
- at
- select media to attach
- name
- name of partition (will create device /dev/map/ that_name
- start
-
offset from the beginning of the parent media to start of the mapped partition.
This field can also have a special value
Qq Li search: Ns Ar searchstart Ns Li : Ns Ar searchstep Ns Li : Ns Ar searchkey ,
where:
- searchstart
- offset from the beginning of the parent media where search will be started
- searchstep
- value of the increment used while searching for the partition boundary markers
- searchkey
- key which will be used to find partition boundary markers. The wildcard `.' can be used to match any character on that position
- end
- offset from the beginning of the parent media to the end of the mapped partition. This field can also have the special value Qq Li search: Ns Ar searchstart Ns Li : Ns Ar searchstep Ns Li : Ns Ar searchkey , as described above.
- offset
- offset where the data of the mapped partition begins
Each record contains the start address (in bytes) from the media begin, size (in bytes), offset where the data of mapped partition begins, and the name of new device.
MAP: 150000x690000, data=0x690000 "/dev/map/rootfs"
00150000 - start address 00690000 - size 00000000 - data begin from zero offset 00690000 - data size "map/rootfs" - new media will be accessible via /dev/map/rootfs dev.
EXAMPLES
If we need to implement layout shown above, we need to define the following hints:hint.map.0.at="cfid0" hint.map.0.start=0x00000000 hint.map.0.end=0x00030000 hint.map.0.name="bootloader" hint.map.0.readonly=1
This defines /dev/map/bootloader at disk cfid0 starting at 0x00000000 and ending at 0x00030000 it is also marked as readonly.
hint.map.1.at="cfid0" hint.map.1.start=0x00030000 hint.map.1.end=0x00040000 hint.map.1.name="factory" hint.map.2.at="cfid0" hint.map.2.start=0x00040000 hint.map.2.end=0x007e0000 hint.map.2.name="upgrade" hint.map.3.at="cfid0" hint.map.3.name="kernel" hint.map.3.start=0x00040000 hint.map.3.end="search:0x00100000:0x10000:.!/bin/sh"
This defines /dev/map/kernel at disk cfid0 starting at 0x00040000 but the end position must be searched by finding the key ``.!/bin/sh '' from offset 0x00100000 to the end of media with step 0x10000 The real marker in this case is ``#!/bin/sh '' but `#' terminates the line when the hints file is parsed, so we need to use wildcard `.' instead of `#'
hint.map.4.at="cfid0" hint.map.4.name="rootfs" hint.map.4.start="search:0x00100000:0x10000:.!/bin/sh" hint.map.4.end=0x007e0000 hint.map.5.at="cfid0" hint.map.5.start=0x007e0000 hint.map.5.end=0x00800000 hint.map.5.name="config"