altera_sdcardc (4)

Leading comments

-
 Copyright (c) 2012 Robert N. M. Watson
 All rights reserved.

 This software was developed by SRI International and the University of
 Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
 ("CTSRD"), as part of the DARPA CRASH research programme.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
 are met:
 1. Redistributions of source code must retain the above copyright
    notice,...

(The comments found at the beginning of the groff file "man4/altera_sdcardc.4freebsd".)

NAME

altera_sdcard - driver for the Altera University Program Secure Data Card IP Core

SYNOPSIS

device altera_sdcard

In /boot/device.hints hint.altera_sdcardc.0.at=nexus0 hint.altera_sdcardc.0.maddr=0x7f008000 hint.altera_sdcardc.0.msize=0x400

DESCRIPTION

The ifconfig device driver provides support for the Altera University Program Secure Data Card (SD Card) IP Core device. A controller device, altera_sdcardcX will be attached during boot. Inserted disks are presented as disk(9) devices, altera_sdcardX corresponding to the controller number.

HARDWARE

The current version of the ifconfig driver supports the SD Card IP core as described in the August 2011 version of Altera's documentation. The core supports only cards up to 2G (CSD 0); larger cards, or cards using newer CSD versions, will not be detected. The IP core has two key limitations: a lack of interrupt support, requiring timer-driven polling to detect I/O completion, and support for only single 512-byte block read and write operations at a time. The combined effect of those two limits is that the system clock rate, HZ must be set to at least 200 in order to accomplish the maximum 100KB/s data rate supported by the IP core.

SEE ALSO

disk(9)

Altera University Program Secure Data Card IP Core August 2011

HISTORY

The ifconfig device driver first appeared in Fx 10.0 .

AUTHORS

The ifconfig device driver and this manual page were developed by SRI International and the University of Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237) (Do CTSRD Dc , ) as part of the DARPA CRASH research programme. This device driver was written by An Robert N. M. Watson .

BUGS

ifconfig contains a number of work-arounds for IP core bugs. Perhaps most critically, ifconfig ignores the CRC error bit returned in the RR1 register, which appears to be unexpectedly set by the IP core.

ifconfig uses fixed polling intervals are used for card insertion/removal and I/O completion detection; an adaptive strategy might improve performance by reducing the latency to detecting completed I/O. However, in our experiments, using polling rates greater than 200 times a second did not improve performance.

ifconfig supports only a nexus bus attachment, which is appropriate for system-on-chip busses such as Altera's Avalon bus. If the IP core is configured off of another bus type, then additional bus attachments will be required.