TAILQ_HEAD_INITIALIZER (3)

Leading comments

 Copyright (c) 1993
	The Regents of the University of California.  All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
 are met:
 1. Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following discl...

(The comments found at the beginning of the groff file "man3/TAILQ_HEAD_INITIALIZER.3bsd".)

NAME

SLIST_EMPTY SLIST_ENTRY SLIST_FIRST SLIST_FOREACH SLIST_FOREACH_FROM SLIST_FOREACH_SAFE SLIST_FOREACH_FROM_SAFE SLIST_HEAD SLIST_HEAD_INITIALIZER SLIST_INIT SLIST_INSERT_AFTER SLIST_INSERT_HEAD SLIST_NEXT SLIST_REMOVE_AFTER SLIST_REMOVE_HEAD SLIST_REMOVE SLIST_SWAP STAILQ_CONCAT STAILQ_EMPTY STAILQ_ENTRY STAILQ_FIRST STAILQ_FOREACH STAILQ_FOREACH_FROM STAILQ_FOREACH_SAFE STAILQ_FOREACH_FROM_SAFE STAILQ_HEAD STAILQ_HEAD_INITIALIZER STAILQ_INIT STAILQ_INSERT_AFTER STAILQ_INSERT_HEAD STAILQ_INSERT_TAIL STAILQ_LAST STAILQ_NEXT STAILQ_REMOVE_AFTER STAILQ_REMOVE_HEAD STAILQ_REMOVE STAILQ_SWAP LIST_EMPTY LIST_ENTRY LIST_FIRST LIST_FOREACH LIST_FOREACH_FROM LIST_FOREACH_SAFE LIST_FOREACH_FROM_SAFE LIST_HEAD LIST_HEAD_INITIALIZER LIST_INIT LIST_INSERT_AFTER LIST_INSERT_BEFORE LIST_INSERT_HEAD LIST_NEXT LIST_PREV LIST_REMOVE LIST_SWAP TAILQ_CONCAT TAILQ_EMPTY TAILQ_ENTRY TAILQ_FIRST TAILQ_FOREACH TAILQ_FOREACH_FROM TAILQ_FOREACH_SAFE TAILQ_FOREACH_FROM_SAFE TAILQ_FOREACH_REVERSE TAILQ_FOREACH_REVERSE_FROM TAILQ_FOREACH_REVERSE_SAFE TAILQ_FOREACH_REVERSE_FROM_SAFE TAILQ_HEAD TAILQ_HEAD_INITIALIZER TAILQ_INIT TAILQ_INSERT_AFTER TAILQ_INSERT_BEFORE TAILQ_INSERT_HEAD TAILQ_INSERT_TAIL TAILQ_LAST TAILQ_NEXT TAILQ_PREV TAILQ_REMOVE TAILQ_SWAP - implementations of singly-linked lists, singly-linked tail queues, lists and tail queues

SYNOPSIS

In sys/queue.h (See libbsd(7) for include usage.) Fn SLIST_EMPTY SLIST_HEAD *head Fn SLIST_ENTRY TYPE Fn SLIST_FIRST SLIST_HEAD *head Fn SLIST_FOREACH TYPE *var SLIST_HEAD *head SLIST_ENTRY NAME Fn SLIST_FOREACH_FROM TYPE *var SLIST_HEAD *head SLIST_ENTRY NAME Fn SLIST_FOREACH_SAFE TYPE *var SLIST_HEAD *head SLIST_ENTRY NAME TYPE *temp_var Fn SLIST_FOREACH_FROM_SAFE TYPE *var SLIST_HEAD *head SLIST_ENTRY NAME TYPE *temp_var Fn SLIST_HEAD HEADNAME TYPE Fn SLIST_HEAD_INITIALIZER SLIST_HEAD head Fn SLIST_INIT SLIST_HEAD *head Fn SLIST_INSERT_AFTER TYPE *listelm TYPE *elm SLIST_ENTRY NAME Fn SLIST_INSERT_HEAD SLIST_HEAD *head TYPE *elm SLIST_ENTRY NAME Fn SLIST_NEXT TYPE *elm SLIST_ENTRY NAME Fn SLIST_REMOVE_AFTER TYPE *elm SLIST_ENTRY NAME Fn SLIST_REMOVE_HEAD SLIST_HEAD *head SLIST_ENTRY NAME Fn SLIST_REMOVE SLIST_HEAD *head TYPE *elm TYPE SLIST_ENTRY NAME Fn SLIST_SWAP SLIST_HEAD *head1 SLIST_HEAD *head2 SLIST_ENTRY NAME Fn STAILQ_CONCAT STAILQ_HEAD *head1 STAILQ_HEAD *head2 Fn STAILQ_EMPTY STAILQ_HEAD *head Fn STAILQ_ENTRY TYPE Fn STAILQ_FIRST STAILQ_HEAD *head Fn STAILQ_FOREACH TYPE *var STAILQ_HEAD *head STAILQ_ENTRY NAME Fn STAILQ_FOREACH_FROM TYPE *var STAILQ_HEAD *head STAILQ_ENTRY NAME Fn STAILQ_FOREACH_SAFE TYPE *var STAILQ_HEAD *head STAILQ_ENTRY NAME TYPE *temp_var Fn STAILQ_FOREACH_FROM_SAFE TYPE *var STAILQ_HEAD *head STAILQ_ENTRY NAME TYPE *temp_var Fn STAILQ_HEAD HEADNAME TYPE Fn STAILQ_HEAD_INITIALIZER STAILQ_HEAD head Fn STAILQ_INIT STAILQ_HEAD *head Fn STAILQ_INSERT_AFTER STAILQ_HEAD *head TYPE *listelm TYPE *elm STAILQ_ENTRY NAME Fn STAILQ_INSERT_HEAD STAILQ_HEAD *head TYPE *elm STAILQ_ENTRY NAME Fn STAILQ_INSERT_TAIL STAILQ_HEAD *head TYPE *elm STAILQ_ENTRY NAME Fn STAILQ_LAST STAILQ_HEAD *head TYPE STAILQ_ENTRY NAME Fn STAILQ_NEXT TYPE *elm STAILQ_ENTRY NAME Fn STAILQ_REMOVE_AFTER STAILQ_HEAD *head TYPE *elm STAILQ_ENTRY NAME Fn STAILQ_REMOVE_HEAD STAILQ_HEAD *head STAILQ_ENTRY NAME Fn STAILQ_REMOVE STAILQ_HEAD *head TYPE *elm TYPE STAILQ_ENTRY NAME Fn STAILQ_SWAP STAILQ_HEAD *head1 STAILQ_HEAD *head2 STAILQ_ENTRY NAME Fn LIST_EMPTY LIST_HEAD *head Fn LIST_ENTRY TYPE Fn LIST_FIRST LIST_HEAD *head Fn LIST_FOREACH TYPE *var LIST_HEAD *head LIST_ENTRY NAME Fn LIST_FOREACH_FROM TYPE *var LIST_HEAD *head LIST_ENTRY NAME Fn LIST_FOREACH_SAFE TYPE *var LIST_HEAD *head LIST_ENTRY NAME TYPE *temp_var Fn LIST_FOREACH_FROM_SAFE TYPE *var LIST_HEAD *head LIST_ENTRY NAME TYPE *temp_var Fn LIST_HEAD HEADNAME TYPE Fn LIST_HEAD_INITIALIZER LIST_HEAD head Fn LIST_INIT LIST_HEAD *head Fn LIST_INSERT_AFTER TYPE *listelm TYPE *elm LIST_ENTRY NAME Fn LIST_INSERT_BEFORE TYPE *listelm TYPE *elm LIST_ENTRY NAME Fn LIST_INSERT_HEAD LIST_HEAD *head TYPE *elm LIST_ENTRY NAME Fn LIST_NEXT TYPE *elm LIST_ENTRY NAME Fn LIST_PREV TYPE *elm LIST_HEAD *head TYPE LIST_ENTRY NAME Fn LIST_REMOVE TYPE *elm LIST_ENTRY NAME Fn LIST_SWAP LIST_HEAD *head1 LIST_HEAD *head2 TYPE LIST_ENTRY NAME Fn TAILQ_CONCAT TAILQ_HEAD *head1 TAILQ_HEAD *head2 TAILQ_ENTRY NAME Fn TAILQ_EMPTY TAILQ_HEAD *head Fn TAILQ_ENTRY TYPE Fn TAILQ_FIRST TAILQ_HEAD *head Fn TAILQ_FOREACH TYPE *var TAILQ_HEAD *head TAILQ_ENTRY NAME Fn TAILQ_FOREACH_FROM TYPE *var TAILQ_HEAD *head TAILQ_ENTRY NAME Fn TAILQ_FOREACH_SAFE TYPE *var TAILQ_HEAD *head TAILQ_ENTRY NAME TYPE *temp_var Fn TAILQ_FOREACH_FROM_SAFE TYPE *var TAILQ_HEAD *head TAILQ_ENTRY NAME TYPE *temp_var Fn TAILQ_FOREACH_REVERSE TYPE *var TAILQ_HEAD *head HEADNAME TAILQ_ENTRY NAME Fn TAILQ_FOREACH_REVERSE_FROM TYPE *var TAILQ_HEAD *head HEADNAME TAILQ_ENTRY NAME Fn TAILQ_FOREACH_REVERSE_SAFE TYPE *var TAILQ_HEAD *head HEADNAME TAILQ_ENTRY NAME TYPE *temp_var Fn TAILQ_FOREACH_REVERSE_FROM_SAFE TYPE *var TAILQ_HEAD *head HEADNAME TAILQ_ENTRY NAME TYPE *temp_var Fn TAILQ_HEAD HEADNAME TYPE Fn TAILQ_HEAD_INITIALIZER TAILQ_HEAD head Fn TAILQ_INIT TAILQ_HEAD *head Fn TAILQ_INSERT_AFTER TAILQ_HEAD *head TYPE *listelm TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_INSERT_BEFORE TYPE *listelm TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_INSERT_HEAD TAILQ_HEAD *head TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_INSERT_TAIL TAILQ_HEAD *head TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_LAST TAILQ_HEAD *head HEADNAME Fn TAILQ_NEXT TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_PREV TYPE *elm HEADNAME TAILQ_ENTRY NAME Fn TAILQ_REMOVE TAILQ_HEAD *head TYPE *elm TAILQ_ENTRY NAME Fn TAILQ_SWAP TAILQ_HEAD *head1 TAILQ_HEAD *head2 TYPE TAILQ_ENTRY NAME

DESCRIPTION

These macros define and operate on four types of data structures: singly-linked lists, singly-linked tail queues, lists, and tail queues. All four structures support the following functionality:

1. Insertion of a new entry at the head of the list.
2. Insertion of a new entry after any element in the list.
3. O(1) removal of an entry from the head of the list.
4. Forward traversal through the list.
5. Swapping the contents of two lists.

Singly-linked lists are the simplest of the four data structures and support only the above functionality. Singly-linked lists are ideal for applications with large datasets and few or no removals, or for implementing a LIFO queue. Singly-linked lists add the following functionality:

1. O(n) removal of any entry in the list.

Singly-linked tail queues add the following functionality:

1. Entries can be added at the end of a list.
2. O(n) removal of any entry in the list.
3. They may be concatenated.

However:

1. All list insertions must specify the head of the list.
2. Each head entry requires two pointers rather than one.
3. Code size is about 15% greater and operations run about 20% slower than singly-linked lists.

Singly-linked tail queues are ideal for applications with large datasets and few or no removals, or for implementing a FIFO queue.

All doubly linked types of data structures (lists and tail queues) additionally allow:

1. Insertion of a new entry before any element in the list.
2. O(1) removal of any entry in the list.

However:

1. Each element requires two pointers rather than one.
2. Code size and execution time of operations (except for removal) is about twice that of the singly-linked data-structures.

Linked lists are the simplest of the doubly linked data structures. They add the following functionality over the above:

1. They may be traversed backwards.

However:

1. To traverse backwards, an entry to begin the traversal and the list in which it is contained must be specified.

Tail queues add the following functionality:

1. Entries can be added at the end of a list.
2. They may be traversed backwards, from tail to head.
3. They may be concatenated.

However:

1. All list insertions and removals must specify the head of the list.
2. Each head entry requires two pointers rather than one.
3. Code size is about 15% greater and operations run about 20% slower than singly-linked lists.

In the macro definitions, Fa TYPE is the name of a user defined structure, that must contain a field of type SLIST_ENTRY STAILQ_ENTRY LIST_ENTRY or TAILQ_ENTRY named Fa NAME . The argument Fa HEADNAME is the name of a user defined structure that must be declared using the macros SLIST_HEAD STAILQ_HEAD LIST_HEAD or TAILQ_HEAD See the examples below for further explanation of how these macros are used.

SINGLY-LINKED LISTS

A singly-linked list is headed by a structure defined by the SLIST_HEAD macro. This structure contains a single pointer to the first element on the list. The elements are singly linked for minimum space and pointer manipulation overhead at the expense of O(n) removal for arbitrary elements. New elements can be added to the list after an existing element or at the head of the list. An Fa SLIST_HEAD structure is declared as follows:

SLIST_HEAD(HEADNAME, TYPE) head;

where Fa HEADNAME is the name of the structure to be defined, and Fa TYPE is the type of the elements to be linked into the list. A pointer to the head of the list can later be declared as:

struct HEADNAME *headp;

(The names head and headp are user selectable.)

The macro SLIST_HEAD_INITIALIZER evaluates to an initializer for the list Fa head .

The macro SLIST_EMPTY evaluates to true if there are no elements in the list.

The macro SLIST_ENTRY declares a structure that connects the elements in the list.

The macro SLIST_FIRST returns the first element in the list or NULL if the list is empty.

The macro SLIST_FOREACH traverses the list referenced by Fa head in the forward direction, assigning each element in turn to Fa var .

The macro SLIST_FOREACH_FROM behaves identically to SLIST_FOREACH when Fa var is NULL, else it treats Fa var as a previously found SLIST element and begins the loop at Fa var instead of the first element in the SLIST referenced by Fa head .

The macro SLIST_FOREACH_SAFE traverses the list referenced by Fa head in the forward direction, assigning each element in turn to Fa var . However, unlike Fn SLIST_FOREACH here it is permitted to both remove Fa var as well as free it from within the loop safely without interfering with the traversal.

The macro SLIST_FOREACH_FROM_SAFE behaves identically to SLIST_FOREACH_SAFE when Fa var is NULL, else it treats Fa var as a previously found SLIST element and begins the loop at Fa var instead of the first element in the SLIST referenced by Fa head .

The macro SLIST_INIT initializes the list referenced by Fa head .

The macro SLIST_INSERT_HEAD inserts the new element Fa elm at the head of the list.

The macro SLIST_INSERT_AFTER inserts the new element Fa elm after the element Fa listelm .

The macro SLIST_NEXT returns the next element in the list.

The macro SLIST_REMOVE_AFTER removes the element after Fa elm from the list. Unlike Fa SLIST_REMOVE , this macro does not traverse the entire list.

The macro SLIST_REMOVE_HEAD removes the element Fa elm from the head of the list. For optimum efficiency, elements being removed from the head of the list should explicitly use this macro instead of the generic Fa SLIST_REMOVE macro.

The macro SLIST_REMOVE removes the element Fa elm from the list.

The macro SLIST_SWAP swaps the contents of Fa head1 and Fa head2 .

SINGLY-LINKED LIST EXAMPLE

SLIST_HEAD(slisthead, entry) head =
    SLIST_HEAD_INITIALIZER(head);
struct slisthead *headp;                /* Singly-linked List head. */
struct entry {
        ...
        SLIST_ENTRY(entry) entries;     /* Singly-linked List. */
        ...
} *n1, *n2, *n3, *np;

SLIST_INIT(&head);                      /* Initialize the list. */

n1 = malloc(sizeof(struct entry));      /* Insert at the head. */
SLIST_INSERT_HEAD(&head, n1, entries);

n2 = malloc(sizeof(struct entry));      /* Insert after. */
SLIST_INSERT_AFTER(n1, n2, entries);

SLIST_REMOVE(&head, n2, entry, entries);/* Deletion. */
free(n2);

n3 = SLIST_FIRST(&head);
SLIST_REMOVE_HEAD(&head, entries);      /* Deletion from the head. */
free(n3);
                                        /* Forward traversal. */
SLIST_FOREACH(np, &head, entries)
        np-> ...
                                        /* Safe forward traversal. */
SLIST_FOREACH_SAFE(np, &head, entries, np_temp) {
        np->do_stuff();
        ...
        SLIST_REMOVE(&head, np, entry, entries);
        free(np);
}

while (!SLIST_EMPTY(&head)) {           /* List Deletion. */
        n1 = SLIST_FIRST(&head);
        SLIST_REMOVE_HEAD(&head, entries);
        free(n1);
}

SINGLY-LINKED TAIL QUEUES

A singly-linked tail queue is headed by a structure defined by the STAILQ_HEAD macro. This structure contains a pair of pointers, one to the first element in the tail queue and the other to the last element in the tail queue. The elements are singly linked for minimum space and pointer manipulation overhead at the expense of O(n) removal for arbitrary elements. New elements can be added to the tail queue after an existing element, at the head of the tail queue, or at the end of the tail queue. A Fa STAILQ_HEAD structure is declared as follows:

STAILQ_HEAD(HEADNAME, TYPE) head;

where HEADNAME is the name of the structure to be defined, and TYPE is the type of the elements to be linked into the tail queue. A pointer to the head of the tail queue can later be declared as:

struct HEADNAME *headp;

(The names head and headp are user selectable.)

The macro STAILQ_HEAD_INITIALIZER evaluates to an initializer for the tail queue Fa head .

The macro STAILQ_CONCAT concatenates the tail queue headed by Fa head2 onto the end of the one headed by Fa head1 removing all entries from the former.

The macro STAILQ_EMPTY evaluates to true if there are no items on the tail queue.

The macro STAILQ_ENTRY declares a structure that connects the elements in the tail queue.

The macro STAILQ_FIRST returns the first item on the tail queue or NULL if the tail queue is empty.

The macro STAILQ_FOREACH traverses the tail queue referenced by Fa head in the forward direction, assigning each element in turn to Fa var .

The macro STAILQ_FOREACH_FROM behaves identically to STAILQ_FOREACH when Fa var is NULL, else it treats Fa var as a previously found STAILQ element and begins the loop at Fa var instead of the first element in the STAILQ referenced by Fa head .

The macro STAILQ_FOREACH_SAFE traverses the tail queue referenced by Fa head in the forward direction, assigning each element in turn to Fa var . However, unlike Fn STAILQ_FOREACH here it is permitted to both remove Fa var as well as free it from within the loop safely without interfering with the traversal.

The macro STAILQ_FOREACH_FROM_SAFE behaves identically to STAILQ_FOREACH_SAFE when Fa var is NULL, else it treats Fa var as a previously found STAILQ element and begins the loop at Fa var instead of the first element in the STAILQ referenced by Fa head .

The macro STAILQ_INIT initializes the tail queue referenced by Fa head .

The macro STAILQ_INSERT_HEAD inserts the new element Fa elm at the head of the tail queue.

The macro STAILQ_INSERT_TAIL inserts the new element Fa elm at the end of the tail queue.

The macro STAILQ_INSERT_AFTER inserts the new element Fa elm after the element Fa listelm .

The macro STAILQ_LAST returns the last item on the tail queue. If the tail queue is empty the return value is NULL

The macro STAILQ_NEXT returns the next item on the tail queue, or NULL this item is the last.

The macro STAILQ_REMOVE_AFTER removes the element after Fa elm from the tail queue. Unlike Fa STAILQ_REMOVE , this macro does not traverse the entire tail queue.

The macro STAILQ_REMOVE_HEAD removes the element at the head of the tail queue. For optimum efficiency, elements being removed from the head of the tail queue should use this macro explicitly rather than the generic Fa STAILQ_REMOVE macro.

The macro STAILQ_REMOVE removes the element Fa elm from the tail queue.

The macro STAILQ_SWAP swaps the contents of Fa head1 and Fa head2 .

SINGLY-LINKED TAIL QUEUE EXAMPLE

STAILQ_HEAD(stailhead, entry) head =
    STAILQ_HEAD_INITIALIZER(head);
struct stailhead *headp;                /* Singly-linked tail queue head. */
struct entry {
        ...
        STAILQ_ENTRY(entry) entries;    /* Tail queue. */
        ...
} *n1, *n2, *n3, *np;

STAILQ_INIT(&head);                     /* Initialize the queue. */

n1 = malloc(sizeof(struct entry));      /* Insert at the head. */
STAILQ_INSERT_HEAD(&head, n1, entries);

n1 = malloc(sizeof(struct entry));      /* Insert at the tail. */
STAILQ_INSERT_TAIL(&head, n1, entries);

n2 = malloc(sizeof(struct entry));      /* Insert after. */
STAILQ_INSERT_AFTER(&head, n1, n2, entries);
                                        /* Deletion. */
STAILQ_REMOVE(&head, n2, entry, entries);
free(n2);
                                        /* Deletion from the head. */
n3 = STAILQ_FIRST(&head);
STAILQ_REMOVE_HEAD(&head, entries);
free(n3);
                                        /* Forward traversal. */
STAILQ_FOREACH(np, &head, entries)
        np-> ...
                                        /* Safe forward traversal. */
STAILQ_FOREACH_SAFE(np, &head, entries, np_temp) {
        np->do_stuff();
        ...
        STAILQ_REMOVE(&head, np, entry, entries);
        free(np);
}
                                        /* TailQ Deletion. */
while (!STAILQ_EMPTY(&head)) {
        n1 = STAILQ_FIRST(&head);
        STAILQ_REMOVE_HEAD(&head, entries);
        free(n1);
}
                                        /* Faster TailQ Deletion. */
n1 = STAILQ_FIRST(&head);
while (n1 != NULL) {
        n2 = STAILQ_NEXT(n1, entries);
        free(n1);
        n1 = n2;
}
STAILQ_INIT(&head);

LISTS

A list is headed by a structure defined by the LIST_HEAD macro. This structure contains a single pointer to the first element on the list. The elements are doubly linked so that an arbitrary element can be removed without traversing the list. New elements can be added to the list after an existing element, before an existing element, or at the head of the list. A Fa LIST_HEAD structure is declared as follows:

LIST_HEAD(HEADNAME, TYPE) head;

where Fa HEADNAME is the name of the structure to be defined, and Fa TYPE is the type of the elements to be linked into the list. A pointer to the head of the list can later be declared as:

struct HEADNAME *headp;

(The names head and headp are user selectable.)

The macro LIST_HEAD_INITIALIZER evaluates to an initializer for the list Fa head .

The macro LIST_EMPTY evaluates to true if there are no elements in the list.

The macro LIST_ENTRY declares a structure that connects the elements in the list.

The macro LIST_FIRST returns the first element in the list or NULL if the list is empty.

The macro LIST_FOREACH traverses the list referenced by Fa head in the forward direction, assigning each element in turn to Fa var .

The macro LIST_FOREACH_FROM behaves identically to LIST_FOREACH when Fa var is NULL, else it treats Fa var as a previously found LIST element and begins the loop at Fa var instead of the first element in the LIST referenced by Fa head .

The macro LIST_FOREACH_SAFE traverses the list referenced by Fa head in the forward direction, assigning each element in turn to Fa var . However, unlike Fn LIST_FOREACH here it is permitted to both remove Fa var as well as free it from within the loop safely without interfering with the traversal.

The macro LIST_FOREACH_FROM_SAFE behaves identically to LIST_FOREACH_SAFE when Fa var is NULL, else it treats Fa var as a previously found LIST element and begins the loop at Fa var instead of the first element in the LIST referenced by Fa head .

The macro LIST_INIT initializes the list referenced by Fa head .

The macro LIST_INSERT_HEAD inserts the new element Fa elm at the head of the list.

The macro LIST_INSERT_AFTER inserts the new element Fa elm after the element Fa listelm .

The macro LIST_INSERT_BEFORE inserts the new element Fa elm before the element Fa listelm .

The macro LIST_NEXT returns the next element in the list, or NULL if this is the last.

The macro LIST_PREV returns the previous element in the list, or NULL if this is the first. List Fa head must contain element Fa elm .

The macro LIST_REMOVE removes the element Fa elm from the list.

The macro LIST_SWAP swaps the contents of Fa head1 and Fa head2 .

LIST EXAMPLE

LIST_HEAD(listhead, entry) head =
    LIST_HEAD_INITIALIZER(head);
struct listhead *headp;                 /* List head. */
struct entry {
        ...
        LIST_ENTRY(entry) entries;      /* List. */
        ...
} *n1, *n2, *n3, *np, *np_temp;

LIST_INIT(&head);                       /* Initialize the list. */

n1 = malloc(sizeof(struct entry));      /* Insert at the head. */
LIST_INSERT_HEAD(&head, n1, entries);

n2 = malloc(sizeof(struct entry));      /* Insert after. */
LIST_INSERT_AFTER(n1, n2, entries);

n3 = malloc(sizeof(struct entry));      /* Insert before. */
LIST_INSERT_BEFORE(n2, n3, entries);

LIST_REMOVE(n2, entries);               /* Deletion. */
free(n2);
                                        /* Forward traversal. */
LIST_FOREACH(np, &head, entries)
        np-> ...

                                        /* Safe forward traversal. */
LIST_FOREACH_SAFE(np, &head, entries, np_temp) {
        np->do_stuff();
        ...
        LIST_REMOVE(np, entries);
        free(np);
}

while (!LIST_EMPTY(&head)) {            /* List Deletion. */
        n1 = LIST_FIRST(&head);
        LIST_REMOVE(n1, entries);
        free(n1);
}

n1 = LIST_FIRST(&head);                 /* Faster List Deletion. */
while (n1 != NULL) {
        n2 = LIST_NEXT(n1, entries);
        free(n1);
        n1 = n2;
}
LIST_INIT(&head);

TAIL QUEUES

A tail queue is headed by a structure defined by the TAILQ_HEAD macro. This structure contains a pair of pointers, one to the first element in the tail queue and the other to the last element in the tail queue. The elements are doubly linked so that an arbitrary element can be removed without traversing the tail queue. New elements can be added to the tail queue after an existing element, before an existing element, at the head of the tail queue, or at the end of the tail queue. A Fa TAILQ_HEAD structure is declared as follows:

TAILQ_HEAD(HEADNAME, TYPE) head;

where HEADNAME is the name of the structure to be defined, and TYPE is the type of the elements to be linked into the tail queue. A pointer to the head of the tail queue can later be declared as:

struct HEADNAME *headp;

(The names head and headp are user selectable.)

The macro TAILQ_HEAD_INITIALIZER evaluates to an initializer for the tail queue Fa head .

The macro TAILQ_CONCAT concatenates the tail queue headed by Fa head2 onto the end of the one headed by Fa head1 removing all entries from the former.

The macro TAILQ_EMPTY evaluates to true if there are no items on the tail queue.

The macro TAILQ_ENTRY declares a structure that connects the elements in the tail queue.

The macro TAILQ_FIRST returns the first item on the tail queue or NULL if the tail queue is empty.

The macro TAILQ_FOREACH traverses the tail queue referenced by Fa head in the forward direction, assigning each element in turn to Fa var . Fa var is set to NULL if the loop completes normally, or if there were no elements.

The macro TAILQ_FOREACH_FROM behaves identically to TAILQ_FOREACH when Fa var is NULL, else it treats Fa var as a previously found TAILQ element and begins the loop at Fa var instead of the first element in the TAILQ referenced by Fa head .

The macro TAILQ_FOREACH_REVERSE traverses the tail queue referenced by Fa head in the reverse direction, assigning each element in turn to Fa var .

The macro TAILQ_FOREACH_REVERSE_FROM behaves identically to TAILQ_FOREACH_REVERSE when Fa var is NULL, else it treats Fa var as a previously found TAILQ element and begins the reverse loop at Fa var instead of the last element in the TAILQ referenced by Fa head .

The macros TAILQ_FOREACH_SAFE and TAILQ_FOREACH_REVERSE_SAFE traverse the list referenced by Fa head in the forward or reverse direction respectively, assigning each element in turn to Fa var . However, unlike their unsafe counterparts, TAILQ_FOREACH and TAILQ_FOREACH_REVERSE make it possible to both remove Fa var as well as free it from within the loop safely without interfering with the traversal.

The macro TAILQ_FOREACH_FROM_SAFE behaves identically to TAILQ_FOREACH_SAFE when Fa var is NULL, else it treats Fa var as a previously found TAILQ element and begins the loop at Fa var instead of the first element in the TAILQ referenced by Fa head .

The macro TAILQ_FOREACH_REVERSE_FROM_SAFE behaves identically to TAILQ_FOREACH_REVERSE_SAFE when Fa var is NULL, else it treats Fa var as a previously found TAILQ element and begins the reverse loop at Fa var instead of the last element in the TAILQ referenced by Fa head .

The macro TAILQ_INIT initializes the tail queue referenced by Fa head .

The macro TAILQ_INSERT_HEAD inserts the new element Fa elm at the head of the tail queue.

The macro TAILQ_INSERT_TAIL inserts the new element Fa elm at the end of the tail queue.

The macro TAILQ_INSERT_AFTER inserts the new element Fa elm after the element Fa listelm .

The macro TAILQ_INSERT_BEFORE inserts the new element Fa elm before the element Fa listelm .

The macro TAILQ_LAST returns the last item on the tail queue. If the tail queue is empty the return value is NULL

The macro TAILQ_NEXT returns the next item on the tail queue, or NULL if this item is the last.

The macro TAILQ_PREV returns the previous item on the tail queue, or NULL if this item is the first.

The macro TAILQ_REMOVE removes the element Fa elm from the tail queue.

The macro TAILQ_SWAP swaps the contents of Fa head1 and Fa head2 .

TAIL QUEUE EXAMPLE

TAILQ_HEAD(tailhead, entry) head =
    TAILQ_HEAD_INITIALIZER(head);
struct tailhead *headp;                 /* Tail queue head. */
struct entry {
        ...
        TAILQ_ENTRY(entry) entries;     /* Tail queue. */
        ...
} *n1, *n2, *n3, *np;

TAILQ_INIT(&head);                      /* Initialize the queue. */

n1 = malloc(sizeof(struct entry));      /* Insert at the head. */
TAILQ_INSERT_HEAD(&head, n1, entries);

n1 = malloc(sizeof(struct entry));      /* Insert at the tail. */
TAILQ_INSERT_TAIL(&head, n1, entries);

n2 = malloc(sizeof(struct entry));      /* Insert after. */
TAILQ_INSERT_AFTER(&head, n1, n2, entries);

n3 = malloc(sizeof(struct entry));      /* Insert before. */
TAILQ_INSERT_BEFORE(n2, n3, entries);

TAILQ_REMOVE(&head, n2, entries);       /* Deletion. */
free(n2);
                                        /* Forward traversal. */
TAILQ_FOREACH(np, &head, entries)
        np-> ...
                                        /* Safe forward traversal. */
TAILQ_FOREACH_SAFE(np, &head, entries, np_temp) {
        np->do_stuff();
        ...
        TAILQ_REMOVE(&head, np, entries);
        free(np);
}
                                        /* Reverse traversal. */
TAILQ_FOREACH_REVERSE(np, &head, tailhead, entries)
        np-> ...
                                        /* TailQ Deletion. */
while (!TAILQ_EMPTY(&head)) {
        n1 = TAILQ_FIRST(&head);
        TAILQ_REMOVE(&head, n1, entries);
        free(n1);
}
                                        /* Faster TailQ Deletion. */
n1 = TAILQ_FIRST(&head);
while (n1 != NULL) {
        n2 = TAILQ_NEXT(n1, entries);
        free(n1);
        n1 = n2;
}
TAILQ_INIT(&head);

SEE ALSO

tree(3bsd)

HISTORY

The queue functions first appeared in BSD 4.4