SSL_CONF_finish (3)

Leading comments

Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/SSL_CONF_finish.3ssl".)

NAME

SSL_CONF_cmd_value_type, SSL_CONF_finish, SSL_CONF_cmd - send configuration command

SYNOPSIS

 #include <openssl/ssl.h>

 int SSL_CONF_cmd(SSL_CONF_CTX *cctx, const char *cmd, const char *value);
 int SSL_CONF_cmd_value_type(SSL_CONF_CTX *cctx, const char *cmd);
 int SSL_CONF_finish(SSL_CONF_CTX *cctx);

DESCRIPTION

The function SSL_CONF_cmd() performs configuration operation cmd with optional parameter value on ctx. Its purpose is to simplify application configuration of or structures by providing a common framework for command line options or configuration files.

SSL_CONF_cmd_value_type() returns the type of value that cmd refers to.

The function SSL_CONF_finish() must be called after all configuration operations have been completed. It is used to finalise any operations or to process defaults.

SUPPORTED COMMAND LINE COMMANDS

Currently supported cmd names for command lines (i.e. when the flag is set) are listed below. Note: all cmd names are case sensitive. Unless otherwise stated commands can be used by both clients and servers and the value parameter is not used. The default prefix for command line commands is - and that is reflected below.

-sigalgs

This sets the supported signature algorithms for

TLS

v1.2. For clients this value is used directly for the supported signature algorithms extension. For servers it is used to determine which signature algorithms to support.

The value argument should be a colon separated list of signature algorithms in order of decreasing preference of the form algorithm+hash. algorithm is one of

RSA

,

DSA

or

ECDSA

and hash is a supported algorithm

OID

short name such as

SHA1

,

SHA224

,

SHA256

,

SHA384

of

SHA512

. Note: algorithm and hash names are case sensitive.

If this option is not set then all signature algorithms supported by the OpenSSL library are permissible.

-client_sigalgs

This sets the supported signature algorithms associated with client authentication for

TLS

v1.2. For servers the value is used in the supported signature algorithms field of a certificate request. For clients it is used to determine which signature algorithm to with the client certificate. If a server does not request a certificate this option has no effect.

The syntax of value is identical to -sigalgs. If not set then the value set for -sigalgs will be used instead.

-curves

This sets the supported elliptic curves. For clients the curves are sent using the supported curves extension. For servers it is used to determine which curve to use. This setting affects curves used for both signatures and key exchange, if applicable.

The value argument is a colon separated list of curves. The curve can be either the

NIST

name (e.g. P-256) or an OpenSSL

OID

name (e.g prime256v1). Curve names are case sensitive.

-named_curve

This sets the temporary curve used for ephemeral

ECDH

modes. Only used by servers

The value argument is a curve name or the special value auto which picks an appropriate curve based on client and server preferences. The curve can be either the

NIST

name (e.g. P-256) or an OpenSSL

OID

name (e.g prime256v1). Curve names are case sensitive.

-cipher

Sets the cipher suite list to value. Note: syntax checking of value is currently not performed unless a

SSL

or

SSL_CTX

structure is associated with cctx.

-cert

Attempts to use the file value as the certificate for the appropriate context. It currently uses SSL_CTX_use_certificate_chain_file() if an

SSL_CTX

structure is set or SSL_use_certificate_file() with filetype

PEM

if an

SSL

structure is set. This option is only supported if certificate operations are permitted.

-key

Attempts to use the file value as the private key for the appropriate context. This option is only supported if certificate operations are permitted. Note: if no -key option is set then a private key is not loaded unless the flag

SSL_CONF_FLAG_REQUIRE_PRIVATE

is set.

-dhparam

Attempts to use the file value as the set of temporary

DH

parameters for the appropriate context. This option is only supported if certificate operations are permitted.

-min_protocol, -max_protocol

Sets the minimum and maximum supported protocol. Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2 for

TLS

and DTLSv1, DTLSv1.2 for

DTLS,

and None for no limit. If the either bound is not specified then only the other bound applies, if specified. To restrict the supported protocol versions use these commands rather than the deprecated alternative commands below.

-no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2

Disables protocol support for SSLv3, TLSv1.0, TLSv1.1 or TLSv1.2 by setting the corresponding options SSL_OP_NO_SSLv3, SSL_OP_NO_TLSv1, SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 respectively. These options are deprecated, instead use -min_protocol and -max_protocol.

-bugs

Various bug workarounds are set, same as setting

SSL_OP_ALL

.

-comp

Enables support for

SSL/TLS

compression, same as clearing

SSL_OP_NO_COMPRESSION

. This command was introduced in OpenSSL 1.1.0. As of OpenSSL 1.1.0, compression is off by default.

-no_comp

Disables support for

SSL/TLS

compression, same as setting

SSL_OP_NO_COMPRESSION

. As of OpenSSL 1.1.0, compression is off by default.

-no_ticket

Disables support for session tickets, same as setting

SSL_OP_NO_TICKET

.

-serverpref

Use server and not client preference order when determining which cipher suite, signature algorithm or elliptic curve to use for an incoming connection. Equivalent to

SSL_OP_CIPHER_SERVER_PREFERENCE

. Only used by servers.

-no_resumption_on_reneg

set

SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION

flag. Only used by servers.

-legacyrenegotiation

permits the use of unsafe legacy renegotiation. Equivalent to setting

SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION

.

-legacy_server_connect, -no_legacy_server_connect

permits or prohibits the use of unsafe legacy renegotiation for OpenSSL clients only. Equivalent to setting or clearing

SSL_OP_LEGACY_SERVER_CONNECT

. Set by default.

-strict

enables strict mode protocol handling. Equivalent to setting

SSL_CERT_FLAG_TLS_STRICT

.

SUPPORTED CONFIGURATION FILE COMMANDS

Currently supported cmd names for configuration files (i.e. when the flag is set) are listed below. All configuration file cmd names are case insensitive so signaturealgorithms is recognised as well as SignatureAlgorithms. Unless otherwise stated the value names are also case insensitive.

Note: the command prefix (if set) alters the recognised cmd values.

CipherString

Sets the cipher suite list to value. Note: syntax checking of value is currently not performed unless an

SSL

or

SSL_CTX

structure is associated with cctx.

Certificate

Attempts to use the file value as the certificate for the appropriate context. It currently uses SSL_CTX_use_certificate_chain_file() if an

SSL_CTX

structure is set or SSL_use_certificate_file() with filetype

PEM

if an

SSL

structure is set. This option is only supported if certificate operations are permitted.

PrivateKey

Attempts to use the file value as the private key for the appropriate context. This option is only supported if certificate operations are permitted. Note: if no PrivateKey option is set then a private key is not loaded unless the

SSL_CONF_FLAG_REQUIRE_PRIVATE

is set.

ChainCAFile, ChainCAPath, VerifyCAFile, VerifyCAPath

These options indicate a file or directory used for building certificate chains or verifying certificate chains. These options are only supported if certificate operations are permitted.

ServerInfoFile

Attempts to use the file value in the ``serverinfo'' extension using the function SSL_CTX_use_serverinfo_file.

DHParameters

Attempts to use the file value as the set of temporary

DH

parameters for the appropriate context. This option is only supported if certificate operations are permitted.

SignatureAlgorithms

This sets the supported signature algorithms for

TLS

v1.2. For clients this value is used directly for the supported signature algorithms extension. For servers it is used to determine which signature algorithms to support.

The value argument should be a colon separated list of signature algorithms in order of decreasing preference of the form algorithm+hash. algorithm is one of

RSA

,

DSA

or

ECDSA

and hash is a supported algorithm

OID

short name such as

SHA1

,

SHA224

,

SHA256

,

SHA384

of

SHA512

. Note: algorithm and hash names are case sensitive.

If this option is not set then all signature algorithms supported by the OpenSSL library are permissible.

ClientSignatureAlgorithms

This sets the supported signature algorithms associated with client authentication for

TLS

v1.2. For servers the value is used in the supported signature algorithms field of a certificate request. For clients it is used to determine which signature algorithm to with the client certificate.

The syntax of value is identical to SignatureAlgorithms. If not set then the value set for SignatureAlgorithms will be used instead.

Curves

This sets the supported elliptic curves. For clients the curves are sent using the supported curves extension. For servers it is used to determine which curve to use. This setting affects curves used for both signatures and key exchange, if applicable.

The value argument is a colon separated list of curves. The curve can be either the

NIST

name (e.g. P-256) or an OpenSSL

OID

name (e.g prime256v1). Curve names are case sensitive.

MinProtocol

This sets the minimum supported

SSL, TLS

or

DTLS

version.

Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, DTLSv1 and DTLSv1.2. The value None will disable the limit.

MaxProtocol

This sets the maximum supported

SSL, TLS

or

DTLS

version.

Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, DTLSv1 and DTLSv1.2. The value None will disable the limit.

Protocol

This can be used to enable or disable certain versions of the

SSL, TLS

or

DTLS

protocol.

The value argument is a comma separated list of supported protocols to enable or disable. If a protocol is preceded by - that version is disabled.

All protocol versions are enabled by default. You need to disable at least one protocol version for this setting have any effect. Only enabling some protocol versions does not disable the other protocol versions.

Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, TLSv1.2, DTLSv1 and DTLSv1.2. The special value

ALL

refers to all supported versions.

This can't enable protocols that are disabled using MinProtocol or MaxProtocol, but can disable protocols that are still allowed by them.

The Protocol command is fragile and deprecated; do not use it. Use MinProtocol and MaxProtocol instead. If you do use Protocol, make sure that the resulting range of enabled protocols has no ``holes'', e.g. if

TLS 1.0

and

TLS 1.2

are both enabled, make sure to also leave

TLS 1.1

enabled.

Options

The value argument is a comma separated list of various flags to set. If a flag string is preceded - it is disabled. See the SSL_CTX_set_options(3) function for more details of individual options.

Each option is listed below. Where an operation is enabled by default the -flag syntax is needed to disable it.

SessionTicket: session ticket support, enabled by default. Inverse of

SSL_OP_NO_TICKET

: that is -SessionTicket is the same as setting

SSL_OP_NO_TICKET

.

Compression:

SSL/TLS

compression support, enabled by default. Inverse of

SSL_OP_NO_COMPRESSION

.

EmptyFragments: use empty fragments as a countermeasure against a

SSL 3.0/TLS 1.0

protocol vulnerability affecting

CBC

ciphers. It is set by default. Inverse of

SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS

.

Bugs: enable various bug workarounds. Same as

SSL_OP_ALL

.

DHSingle: enable single use

DH

keys, set by default. Inverse of

SSL_OP_DH_SINGLE

. Only used by servers.

ECDHSingle enable single use

ECDH

keys, set by default. Inverse of

SSL_OP_ECDH_SINGLE

. Only used by servers.

ServerPreference use server and not client preference order when determining which cipher suite, signature algorithm or elliptic curve to use for an incoming connection. Equivalent to

SSL_OP_CIPHER_SERVER_PREFERENCE

. Only used by servers.

NoResumptionOnRenegotiation set

SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION

flag. Only used by servers.

UnsafeLegacyRenegotiation permits the use of unsafe legacy renegotiation. Equivalent to

SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION

.

UnsafeLegacyServerConnect permits the use of unsafe legacy renegotiation for OpenSSL clients only. Equivalent to

SSL_OP_LEGACY_SERVER_CONNECT

. Set by default.

VerifyMode

The value argument is a comma separated list of flags to set.

Peer enables peer verification: for clients only.

Request requests but does not require a certificate from the client. Servers only.

Require requests and requires a certificate from the client: an error occurs if the client does not present a certificate. Servers only.

Once requests a certificate from a client only on the initial connection: not when renegotiating. Servers only.

ClientCAFile, ClientCAPath

A file or directory of certificates in

PEM

format whose names are used as the set of acceptable names for client CAs. Servers only. This option is only supported if certificate operations are permitted.

SUPPORTED COMMAND TYPES

The function SSL_CONF_cmd_value_type() currently returns one of the following types:

SSL_CONF_TYPE_UNKNOWN

The cmd string is unrecognised, this return value can be use to flag syntax errors.

SSL_CONF_TYPE_STRING

The value is a string without any specific structure.

SSL_CONF_TYPE_FILE

The value is a file name.

SSL_CONF_TYPE_DIR

The value is a directory name.

SSL_CONF_TYPE_NONE

The value string is not used e.g. a command line option which doesn't take an argument.

NOTES

The order of operations is significant. This can be used to set either defaults or values which cannot be overridden. For example if an application calls:

 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
 SSL_CONF_cmd(ctx, userparam, uservalue);

it will disable SSLv3 support by default but the user can override it. If however the call sequence is:

 SSL_CONF_cmd(ctx, userparam, uservalue);
 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

SSLv3 is always disabled and attempt to override this by the user are ignored.

By checking the return code of SSL_CTX_cmd() it is possible to query if a given cmd is recognised, this is useful is SSL_CTX_cmd() values are mixed with additional application specific operations.

For example an application might call SSL_CTX_cmd() and if it returns -2 (unrecognised command) continue with processing of application specific commands.

Applications can also use SSL_CTX_cmd() to process command lines though the utility function SSL_CTX_cmd_argv() is normally used instead. One way to do this is to set the prefix to an appropriate value using SSL_CONF_CTX_set1_prefix(), pass the current argument to cmd and the following argument to value (which may be

).

In this case if the return value is positive then it is used to skip that number of arguments as they have been processed by SSL_CTX_cmd(). If -2 is returned then cmd is not recognised and application specific arguments can be checked instead. If -3 is returned a required argument is missing and an error is indicated. If 0 is returned some other error occurred and this can be reported back to the user.

The function SSL_CONF_cmd_value_type() can be used by applications to check for the existence of a command or to perform additional syntax checking or translation of the command value. For example if the return value is

an application could translate a relative pathname to an absolute pathname.

EXAMPLES

Set supported signature algorithms:

 SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256");

There are various ways to select the supported protocols.

This set the minimum protocol version to TLSv1, and so disables SSLv3. This is the recommended way to disable protocols.

 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1");

The following also disables SSLv3:

 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

The following will first enable all protocols, and then disable SSLv3. If no protocol versions were disabled before this has the same effect as ``-SSLv3'', but if some versions were disables this will re-enable them before disabling SSLv3.

 SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3");

Only enable TLSv1.2:

 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1.2");
 SSL_CONF_cmd(ctx, "MaxProtocol", "TLSv1.2");

This also only enables TLSv1.2:

 SSL_CONF_cmd(ctx, "Protocol", "-ALL,TLSv1.2");

Disable

session tickets:

 SSL_CONF_cmd(ctx, "Options", "-SessionTicket");

Enable compression:

 SSL_CONF_cmd(ctx, "Options", "Compression");

Set supported curves to P-256, P-384:

 SSL_CONF_cmd(ctx, "Curves", "P-256:P-384");

Set automatic support for any elliptic curve for key exchange:

 SSL_CONF_cmd(ctx, "ECDHParameters", "Automatic");

RETURN VALUES

SSL_CONF_cmd() returns 1 if the value of cmd is recognised and value is used and 2 if both cmd and value are used. In other words it returns the number of arguments processed. This is useful when processing command lines.

A return value of -2 means cmd is not recognised.

A return value of -3 means cmd is recognised and the command requires a value but value is

A return code of 0 indicates that both cmd and value are valid but an error occurred attempting to perform the operation: for example due to an error in the syntax of value in this case the error queue may provide additional information.

SSL_CONF_finish() returns 1 for success and 0 for failure.

SEE ALSO

SSL_CONF_CTX_new(3), SSL_CONF_CTX_set_flags(3), SSL_CONF_CTX_set1_prefix(3), SSL_CONF_CTX_set_ssl_ctx(3), SSL_CONF_cmd_argv(3), SSL_CTX_set_options(3)

HISTORY

SSL_CONF_cmd() was first added to OpenSSL 1.0.2

doesn't have effect since 1.1.0, but the macro is retained for backwards compatibility.

was first added to OpenSSL 1.1.0. In earlier versions of OpenSSL passing a command which didn't take an argument would return .

MinProtocol and MaxProtocol where added in OpenSSL 1.1.0.

COPYRIGHT

Copyright 2012-2016 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the ``License''). You may not use this file except in compliance with the License. You can obtain a copy in the file

in the source distribution or at <www.openssl.org/source/license.html>.