SDLx::Controller (3)
Leading comments
Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35) Standard preamble: ========================================================================
NAME
SDLx::Controller - Handles the loops for events, movement and renderingCATEGORY
Extension, ControllerSYNOPSIS
use SDLx::Controller; # create our controller object my $app = SDLx::Controller->new; # we could also do: my $app = SDLx::App->new; # because App is also a controller # register some callbacks $app->add_event_handler( \&on_event ); $app->add_move_handler( \&on_move ); $app->add_show_handler( \&on_show ); # run our game loop $app->run;
DESCRIPTION
The core of an
while (1) {
...
}
The problem most developers face, besides the repetitive work, is to ensure the screen update is independent of the frame rate. Otherwise, your game will run at different speeds on different machines and this is never good (old MS-DOS games, anyone?).
One way to circumvent this is by capping the frame rate so it's the same no matter what, but this is not the right way to do it as it penalizes better hardware.
This module provides an industry-proven standard for frame independent movement. It calls the movement handlers based on time (hi-res seconds) rather than frame rate. You can add/remove handlers and control your main loop with ease.
METHODS
new
SDLx::Controller->new(
dt => 0.5,
min_t => 0,
event => $event_object,
);
The "dt" parameter specifies the length, in seconds, of a full movement step, and defaults to 0.1. The "dt" can be anything and the game can still look the same. It is only when you change the "dt" without changing all the things in the movement step that are being multiplied by the first move argument that it will make a difference. If you lower the "dt", everything will move faster than it did with it set higher, and vice-versa. This is useful to add slo-mo and fast-forward features to the game, all you would have to do is change the "dt".
"min_t" specifies the minimum time, in seconds, that has to accumulate before any move or show handlers are called, and defaults to 1 / 60. Having the "min_t" at 1 / 60 ensures that the controller can update the screen at a maximum of 60 times per second. A ``V-Sync'' such as this is necessary to prevent video ``tear'', which occurs when the app is updating faster than the monitor can display. Setting it to 0, as seen above, will let the app run as fast as it possibly can.
"delay" specifies a loop delay in millisecs to place on the controller loop.
"event" is a SDL::Event object that events going to the event callbacks are polled in to. It defaults to "SDL::Event->new()".
All parameters are optional.
Returns the new object.
run
After creating and setting up your handlers (see below), call this method to activate the main loop. The main loop will run until "stop" is called.All hooked functions will be called during the main loop, in this order:
- 1. Events
- 2. Movements
- 3. Displaying
Please refer to each handler below for information on received arguments. Note that the second argument received by every callback is the "SDLx::Controller" object.
stop
Returns from the "run" loop.pause
Attempts to pause the application with a call to "SDL::Events::wait_event". See SDL::Events.Takes 1 argument which is a callback. The application waits for the next event with "wait_event". When one is received, it is passed to the callback as the first argument, along with the "SDLx::Controller" object as the second argument. If the callback then returns a true value, "pause" will return. If the callback returns a false value, "pause" will repeat the process.
This can be used to easily implement a pause when the app loses focus:
sub window {
my ($e, $app) = @_;
if($e->type == SDL_QUIT) {
$app->stop;
# quit handling is here so that the app
# can be stopped while paused
}
elsif($e->type == SDL_ACTIVEEVENT) {
if($e->active_state & SDL_APPINPUTFOCUS) {
if($e->active_gain) {
return 1;
}
else {
$app->pause(\&window);
# recursive, but only once since the window
# can't lose focus again without gaining it first
}
}
}
return 0;
}
Note: if you implement your own pause function, remember to update "current_time" to the current time when the application unpauses. This should be done with "Time::HiRes::time". Otherwise, time will accumulate while the application is paused, and many movement steps will be called all at once when it unpauses.
Note 2: a pause will be potentially dangerous to the "run" cycle (even if you implement your own) unless called by an "event" callback.
paused
Returns 1 if the app is paused, undef otherwise. This is only useful when used within code that will be run by "pause":
sub pause {
# press P to toggle pause
my ($e, $app) = @_;
if($e->type == SDL_QUIT) {
$app->stop;
# quit handling is here so that the app
# can be stopped while paused
}
elsif($e->type == SDL_KEYDOWN) {
if($e->key_sym == SDLK_p) {
# We're paused, so end pause
return 1 if $app->paused;
# We're not paused, so pause
$app->pause(\&pause);
}
}
return 0;
}
add_event_handler
Register a callback to handle events. You can add as many subs as you need. Whenever a SDL::Event occurs, all registered callbacks will be triggered in order. Returns the order queue number of the added callback.The first argument passed to registered callbacks is the SDL::Event object. The second is the "SDLx::Controller" object.
sub stop {
my ($event, $app) = @_;
if($event->type == SDL_QUIT) {
$app->stop;
}
}
$app->add_event_handler(\&stop);
add_move_handler
Register a callback to update your objects. You can add as many subs as you need. Returns the order queue number of the added callback.All registered callbacks will be triggered in order for as many "dt" as have happened between calls, and once more for any remaining time less than "dt". The first argument passed to the callbacks is the portion of the step, which will be 1 for a full step, and less than 1 for a partial step. Movement values should be multiplied by this value. The full steps correspond to the amount of "dt" passed between calls, and the partial step corresponds to the call with the remaining time less than "dt". The argument can be 0 if no time has passed since the last cycle. If you need to protect against this, set a "min_t", or put a "return unless $_[0]" at the start of every move handler.
The second argument passed to the callbacks is the "SDLx::Controller" object. The third is the total amount of time passed since the call of "run".
You should use these handlers to update your in-game objects, check collisions, etc. so you can check and/or update it as necessary.
sub move_ball {
my ($step, $app, $t) = @_;
$ball->move_x( $ball->x_vel * $step );
$ball->move_y( $ball->y_vel * $step );
}
add_show_handler
Register a callback to render objects. You can add as many subs as you need. Returns the order queue number of the added callback. All registered callbacks will be triggered in order, once per run of the "run" loop.The first argument passed is the time, in seconds, since the previous call. The second is the "SDLx::Controller" object.
sub show_ball {
my ($delta, $app) = @_;
$app->draw_rect(
[ $ball->x, $ball->y, $ball->size, $ball->size ],
$ball->colour
);
}
remove_move_handler( $index )
remove_event_handler( $index )
remove_show_handler( $index )
Removes the handler with the given index from the respective calling queue.You can also pass a coderef. The first coderef in the handler list that this matches will be removed.
Returns the removed handler.
remove_all_move_handlers
remove_all_event_handlers
remove_all_show_handlers
Removes all handlers from the respective calling queue.remove_all_handlers
Quick access to removing all handlers at once.dt
min_t
current_time
If an argument is passed, modifies the corresponding value to the argument. "dt" and "min_t" will keep their old value until the beginning of the next "run" cycle.Returns the corresponding value.