IO::Socket::INET6 • man page

IO::Socket::INET6 (3)

Leading comments

Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/IO::Socket::INET6.3pm".)

NAME

IO::Socket::INET6 - Object interface for AF_INET/AF_INET6 domain sockets

SYNOPSIS

    use IO::Socket::INET6;

DESCRIPTION

"IO::Socket::INET6" provides an object interface to creating and using sockets in either

AF_INET

AF_INET6

domains. It is built upon the IO::Socket interface and inherits all the methods defined by IO::Socket.

CONSTRUCTOR

new ( [ ARGS ] )

Creates an "IO::Socket::INET6" object, which is a reference to a newly created symbol (see the "Symbol" package). "new" optionally takes arguments, these arguments are in key-value pairs.

In addition to the key-value pairs accepted by IO::Socket, "IO::Socket::INET6" provides.

    Domain      Address family               AF_INET | AF_INET6 | AF_UNSPEC (default)
    PeerAddr    Remote host address          <hostname>[:<port>]
    PeerHost    Synonym for PeerAddr
    PeerPort    Remote port or service       <service>[(<no>)] | <no>
    PeerFlow    Remote flow information
    PeerScope   Remote address scope
    LocalAddr   Local host bind address      hostname[:port]
    LocalHost   Synonym for LocalAddr
    LocalPort   Local host bind port         <service>[(<no>)] | <no>
    LocalFlow   Local host flow information
    LocalScope  Local host address scope
    Proto       Protocol name (or number)    "tcp" | "udp" | ...
    Type        Socket type                  SOCK_STREAM | SOCK_DGRAM | ...
    Listen      Queue size for listen
    ReuseAddr   Set SO_REUSEADDR before binding
    Reuse       Set SO_REUSEADDR before binding (deprecated, prefer ReuseAddr)
    ReusePort   Set SO_REUSEPORT before binding
    Broadcast   Set SO_BROADCAST before binding
    Timeout     Timeout value for various operations
    MultiHomed  Try all addresses for multi-homed hosts
    Blocking    Determine if connection will be blocking mode

If "Listen" is defined then a listen socket is created, else if the socket type, which is derived from the protocol, is

SOCK_STREAM

then connect() is called.

Although it is not illegal, the use of "MultiHomed" on a socket which is in non-blocking mode is of little use. This is because the first connect will never fail with a timeout as the connect call will not block.

The "PeerAddr" can be a hostname, the IPv6-address on the ``2001:800:40:2a05::10'' form , or the IPv4-address on the ``213.34.234.245'' form. The "PeerPort" can be a number or a symbolic service name. The service name might be followed by a number in parenthesis which is used if the service is not known by the system. The "PeerPort" specification can also be embedded in the "PeerAddr" by preceding it with a ``:'', and closing the IPv6 address on brackets ``[]'' if necessary: ``124.678.12.34:23'',``[2a05:345f::10]:23'',``any.server.com:23''.

If "Domain" is not given,

AF_UNSPEC

is assumed, that is, both

AF_INET

and

AF_INET6

will be both considered when resolving

DNS

names.

AF_INET6

has priority. If you guess you are in trouble not reaching the peer,(the service is not available via

AF_INET6

but

AF_INET

) you can either try Multihomed (try any address/family until reach) or concrete your address "family" (

AF_INET, AF_INET6

If "Proto" is not given and you specify a symbolic "PeerPort" port, then the constructor will try to derive "Proto" from the service name. As a last resort "Proto" ``tcp'' is assumed. The "Type" parameter will be deduced from "Proto" if not specified.

If the constructor is only passed a single argument, it is assumed to be a "PeerAddr" specification.

If "Blocking" is set to 0, the connection will be in nonblocking mode. If not specified it defaults to 1 (blocking mode).

Examples:

   $sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                                 PeerPort => 'http(80)',
                                 Proto    => 'tcp');

Suppose either you have no IPv6 connectivity or www.perl.org has no http service on IPv6. Then,

(Trying all address/families until reach)

   $sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                                 PeerPort => 'http(80)',
                                 Multihomed => 1 ,
                                 Proto    => 'tcp');

(Concrete to IPv4 protocol)

   $sock = IO::Socket::INET6->new(PeerAddr => 'www.perl.org',
                                 PeerPort => 'http(80)',
                                 Domain => AF_INET ,
                                 Proto    => 'tcp');

   $sock = IO::Socket::INET6->new(PeerAddr => 'localhost:smtp(25)');

   $sock = IO::Socket::INET6->new(Listen    => 5,
                                 LocalAddr => 'localhost',
                                 LocalPort => 9000,
                                 Proto     => 'tcp');

   $sock = IO::Socket::INET6->new('[::1]:25');

   $sock = IO::Socket::INET6->new(PeerPort  => 9999,
                                 PeerAddr  => Socket6::inet_ntop(AF_INET6,in6addr_broadcast),
                                 Proto     => udp,
                                 LocalAddr => 'localhost',
                                 Broadcast => 1 )
                             or die "Can't bind : $@\n";

 NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE

As of

VERSION 1.18

all IO::Socket objects have autoflush turned on by default. This was not the case with earlier releases.

 NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE

METHODS

accept (): See IO::Socket::INET.
bind (): See IO::Socket::INET.
configure (): This function exists in this module, but I (= Shlomi Fish) don't know what it does, or understand it. It's also not tested anywhere. I'll be happy to be enlightened.
connect (): See IO::Socket::INET.
sockaddr (): Return the address part of the sockaddr structure for the socket
sockdomain(): Returns the domain of the socket -
AF_INET
or
AF_INET6
or whatever.
sockport (): Return the port number that the socket is using on the local host
sockhost (): Return the address part of the sockaddr structure for the socket in a text form (``2001:800:40:2a05::10'' or ``245.245.13.27'')
sockflow (): Return the flow information part of the sockaddr structure for the socket
sockscope (): Return the scope identification part of the sockaddr structure for the socket
peeraddr (): Return the address part of the sockaddr structure for the socket on the peer host
peerport (): Return the port number for the socket on the peer host.
peerhost (): Return the address part of the sockaddr structure for the socket on the peer host in a text form (``2001:800:40:2a05::10'' or ``245.245.13.27'')
peerflow (): Return the flow information part of the sockaddr structure for the socket on the peer host
peerscope (): Return the scope identification part of the sockaddr structure for the socket on the peer host

REPOSITORY

The Subversion repository for this module carrying complete version history and other information is:

<svn.berlios.de/svnroot/repos/web-cpan/IO-Socket-INET6>

AUTHOR

This program is based on IO::Socket::INET by Graham Barr <gbarr@pobox.com> and currently maintained by the Perl Porters.

Modified by Rafael Martinez Torres <rafael.martinez@novagnet.com> and Euro6IX project.

Modified further by Shlomi Fish <shlomif@iglu.org.il>, while disclaiming all copyrights.

COPYRIGHT

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

IO::Socket::INET6 • man page

IO::Socket::INET6 • man page

IO::Socket::INET6 (3)

Leading comments

NAME

SYNOPSIS

DESCRIPTION

CONSTRUCTOR

METHODS

REPOSITORY

SEE ALSO

AUTHOR

COPYRIGHT

Man Section

extra • Version

extra • Source

extra • Book