Gtk2::Ex::FormFactory::Table • man page

Gtk2::Ex::FormFactory::Table (3)

Leading comments

Automatically generated by Pod::Man 2.25 (Pod::Simple 3.16)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/Gtk2::Ex::FormFactory::Table.3pm".)

NAME

Gtk2::Ex::FormFactory::Table - Complex table layouts made easy

SYNOPSIS

  Gtk2::Ex::FormFactory::Table->new (
    layout => "+-------%------+>>>>>>>>>>>>>>>+
               |     Name     |               |
               +--------------~ Image         |
               | Keywords     |               |
               +-------+------+[--------------+
               ^       ' More | Something     |
               ^       |      +-----+--------]+
               _ Notes |      |     |     Foo |
               +-------+------+-----+---------+
               ^ Bar          | Baz           |
               +--------------+---------------+",
    content => [
      Gtk2::Ex::FormFactory::Entry->new ( ... ),
      Gtk2::Ex::FormFactory::Image->new ( ... ),
      Gtk2::Ex::FormFactory::Entry->new ( ... ),
      ...
    ],
    ...
    Gtk2::Ex::FormFactory::Container attributes
    Gtk2::Ex::FormFactory::Widget attributes
  );

DESCRIPTION

This module implements a simple way of defining complex table layouts inside a Gtk2::Ex::FormFactory environment.

OBJECT HIERARCHY

  Gtk2::Ex::FormFactory::Intro

  Gtk2::Ex::FormFactory::Widget
  +--- Gtk2::Ex::FormFactory::Container
       +--- Gtk2::Ex::FormFactory::Table

  Gtk2::Ex::FormFactory::Layout
  Gtk2::Ex::FormFactory::Rules
  Gtk2::Ex::FormFactory::Context
  Gtk2::Ex::FormFactory::Proxy

LAYOUT DEFINITION

Take a look at the example in the

SYNPOSIS

. You see, you simply draw the layout of your table. But how does this work exactly?

Each table is based on a straight two dimensional grid, no matter how complicated the cells span over one or more rows or columns. You see the grid when you extend all lines (horizontal and vertical) up to the borders of the table. The following graphic shows the grid by marking the imaginary lines with X characters:

  +-------+------+>>>>>+>>>>>+
  | Name  X      | Img X     |
  +-------+------+XXXXX+XXXXX|
  | Keyw  X      |     X     |
  +-------+------+-----+-----+
  ^ Notes | More | Som X     |
  ^XXXXXXX|XXXXX +-----+-----+
  ^       |      |     | Foo |
  +-------+------+-----+-----+
  ^ Bar   X      | Baz X     |
  +-------+------+-----+-----+

All cells of the table are attached to this grid.

Gtk2::Ex::FormFactory::Table distinguishes empty and non empty cells. If only whitespace is inside the cell, it's empty, otherwise it has a widget inside. Since Gtk2::Ex::FormFactory::Table is a Gtk2::Ex::FormFactory::Container it has a simple list of widgets as children.

So how are these widgets assigned to the cells of the table?

Short answer: from left/top to the right/bottom. Gtk2::Ex::FormFactory::Table scans your layout drawing in this direction and once it sees a new cell, it's counted as the next child of the table.

Our example has this child order:

  +--------------+>>>>>>>>>>>+
  | 1            | 2         |
  +--------------+           |
  | 3            |           |
  +-------+------+-----------+
  ^ 4     | 5    | 6         |
  ^       |      +-----+>>>>>+
  ^       |      |     | 7   |
  +-------+------+-----+-----+
  ^ 8            | 9         |
  +--------------+-----------+

So the content attribute of this table must list exactly nine widgets, otherwise you would get a runtime exception, when it comes to building the table.

Ok, now it's clear how the table cells are attached to the grid of the table. But what about the size of the cells resp. their widgets and the alignment of widgets inside their cells?

This answer is about funny characters ;)

Cell / Widget expansion

By default all cells and their widgets doesn't expand if the table expands. But you recognized the > and ^ characters? They say, that the cell and its widget should both resize with the table, by allocating all space available (> for horizontal expansion and ^ for vertical). If you want to resize just the cell, but not its widget, refer to the next chapter about widget alignments.

In our example cell 2, 7 and 9 resize horizontal with the table, cell 4, 5, 6, 7, 8 and 9 vertical. Cell 1 and 3 don't resize at all, they fill the cell but stay at the cell's size, no matter how the table resizes.

Widget alignment

By default widgets fill their cell completely. If the cell expands the widgets expands as well. But you may want to align the widget on the left or right side, or in the middle, resp. at the top and the bottom. Once you define an alignment, the widget doesn't fill the cell anymore. Again there are some funny characters defining the alignment.

For horizontal alignments the characters must be used in the top border of the cell. For vertical alignment it needs to be the left border of the cell.

Horinzontal alignment is controlled with these characters: [ left, ] right and % middle.

Vertical alignment is controlled with these characters: ' top, _ bottom and ~ middle.

In the

SYNPOSIS

example ``Image'' is attached in the middle (vertical), ``Notes'' at the bottom and ``More'' at the top. ``Something'' is attached left, ``Foo'' right and ``Name'' centered (horizontal).

Complete list of special characters

This is the complete list of recognized characters and their meaning:

- | + =: The widget fills the cell, but the cell doesn't resize with the table. That's the default, because these characters belong to the set of
ASCII
graphic characters used to draw the layout.
>: The cell expands horizontal. Recognized only in the top border of a cell.
^: The cell expands vertical. Recognized only in the left border of a cell.
[: Widget is attached on the left and doesn't expand anymore with the cell. Recognized only in the top border of a cell.
]: Widget is attached on the right and doesn't expand anymore with the cell. Recognized only in the top border of a cell.
%: Widget is attached in the middle (horizontal) and doesn't expand anymore with the cell. Recognized only in the top border of a cell.
': Widget is attached on the top and doesn't expand anymore with the cell. Recognized only in the left border of a cell.
_: Widget is attached on the bottom and doesn't expand anymore with the cell. Recognized only in the left border of a cell.
~: Widget is attached in the middle (vertical) and doesn't expand anymore with the cell. Recognized only in the left border of a cell.

Notes

Some additional notes about the layout definition string.

Drawing characters

Although this should be obvious ;)

In your drawing | characters (pipe symbol) mark column borders, and - or = (dash or equal sign) characters mark row borders. The + (plus) characters have no special meaning. They're just for candy.

For completeness: additionally the ^ _ and ' characters mark horizontal cell borders, since these are special characters controling the vertical alignment of a cell and are placed on the vertical borders of cells.

You need at least one - or = character in the top vertical border of each row, otherwise the vertical raster of your table can't be recognized correctly. This should be no problem in practice at all.

TAB
characters

Don't use

TAB

characters but true

SPACE

characters inside the table. You get a warning on

TAB

characters.

Whitespace around the table

You may have arbitrary whitespace around your table, inlcuding

TAB

characters. It's cut off before the layout string is parsed.

ATTRIBUTES

Attributes are handled through the common get_ATTR(), set_ATTR() style accessors, but they are mostly passed once to the object constructor and must not be altered after the associated FormFactory was built.

layout =
SCALAR: This is a string which defines the layout of this table using some sort of line art
ASCII
graphics. Refer to the
LAYOUT

DEFINITION
chapter for details about the format.

For more attributes refer to Gtk2::Ex::FormFactory::Container.

AUTHORS

 Jo.rn Reder <joern at zyn dot de>

COPYRIGHT AND LICENSE

This library is free software; you can redistribute it and/or modify it under the terms of the

GNU

Library General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but

WITHOUT

ANY

WARRANTY

; without even the implied warranty of

MERCHANTABILITY

FITNESS

FOR

PARTICULAR

PURPOSE

. See the

GNU

Library General Public License for more details.

You should have received a copy of the

GNU

Library General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,

02111-1307

USA

POD ERRORS

Hey! The above document had some coding errors, which are explained below:

Around line 42:: =cut found outside a pod block. Skipping to next block.
Around line 72:: =cut found outside a pod block. Skipping to next block.

Gtk2::Ex::FormFactory::Table • man page

Gtk2::Ex::FormFactory::Table • man page

Gtk2::Ex::FormFactory::Table (3)

Leading comments

NAME

SYNOPSIS

DESCRIPTION

OBJECT HIERARCHY

LAYOUT DEFINITION

Cell / Widget expansion

Widget alignment

Complete list of special characters

Notes

ATTRIBUTES

AUTHORS

COPYRIGHT AND LICENSE

POD ERRORS

Man Section

extra • Version

extra • Source

extra • Book