EVP_CIPHER_CTX_get_app_data (3)

Leading comments

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/EVP_CIPHER_CTX_get_app_data.3ssl".)

NAME

EVP_CIPHER_CTX_init, EVP_EncryptInit_ex, EVP_EncryptUpdate, EVP_EncryptFinal_ex, EVP_DecryptInit_ex, EVP_DecryptUpdate, EVP_DecryptFinal_ex, EVP_CipherInit_ex, EVP_CipherUpdate, EVP_CipherFinal_ex, EVP_CIPHER_CTX_set_key_length, EVP_CIPHER_CTX_ctrl, EVP_CIPHER_CTX_cleanup, EVP_EncryptInit, EVP_EncryptFinal, EVP_DecryptInit, EVP_DecryptFinal, EVP_CipherInit, EVP_CipherFinal, EVP_get_cipherbyname, EVP_get_cipherbynid, EVP_get_cipherbyobj, EVP_CIPHER_nid, EVP_CIPHER_block_size, EVP_CIPHER_key_length, EVP_CIPHER_iv_length, EVP_CIPHER_flags, EVP_CIPHER_mode, EVP_CIPHER_type, EVP_CIPHER_CTX_cipher, EVP_CIPHER_CTX_nid, EVP_CIPHER_CTX_block_size, EVP_CIPHER_CTX_key_length, EVP_CIPHER_CTX_iv_length, EVP_CIPHER_CTX_get_app_data, EVP_CIPHER_CTX_set_app_data, EVP_CIPHER_CTX_type, EVP_CIPHER_CTX_flags, EVP_CIPHER_CTX_mode, EVP_CIPHER_param_to_asn1, EVP_CIPHER_asn1_to_param, EVP_CIPHER_CTX_set_padding, EVP_enc_null, EVP_des_cbc, EVP_des_ecb, EVP_des_cfb, EVP_des_ofb, EVP_des_ede_cbc, EVP_des_ede, EVP_des_ede_ofb, EVP_des_ede_cfb, EVP_des_ede3_cbc, EVP_des_ede3, EVP_des_ede3_ofb, EVP_des_ede3_cfb, EVP_desx_cbc, EVP_rc4, EVP_rc4_40, EVP_idea_cbc, EVP_idea_ecb, EVP_idea_cfb, EVP_idea_ofb, EVP_idea_cbc, EVP_rc2_cbc, EVP_rc2_ecb, EVP_rc2_cfb, EVP_rc2_ofb, EVP_rc2_40_cbc, EVP_rc2_64_cbc, EVP_bf_cbc, EVP_bf_ecb, EVP_bf_cfb, EVP_bf_ofb, EVP_cast5_cbc, EVP_cast5_ecb, EVP_cast5_cfb, EVP_cast5_ofb, EVP_rc5_32_12_16_cbc, EVP_rc5_32_12_16_ecb, EVP_rc5_32_12_16_cfb, EVP_rc5_32_12_16_ofb, EVP_aes_128_gcm, EVP_aes_192_gcm, EVP_aes_256_gcm, EVP_aes_128_ccm, EVP_aes_192_ccm, EVP_aes_256_ccm - EVP cipher routines

SYNOPSIS

 #include <openssl/evp.h>

 void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *a);

 int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         ENGINE *impl, unsigned char *key, unsigned char *iv);
 int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
         int *outl, unsigned char *in, int inl);
 int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out,
         int *outl);

 int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         ENGINE *impl, unsigned char *key, unsigned char *iv);
 int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
         int *outl, unsigned char *in, int inl);
 int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm,
         int *outl);

 int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         ENGINE *impl, unsigned char *key, unsigned char *iv, int enc);
 int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
         int *outl, unsigned char *in, int inl);
 int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm,
         int *outl);

 int EVP_EncryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         unsigned char *key, unsigned char *iv);
 int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out,
         int *outl);

 int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         unsigned char *key, unsigned char *iv);
 int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm,
         int *outl);

 int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
         unsigned char *key, unsigned char *iv, int enc);
 int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm,
         int *outl);

 int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *x, int padding);
 int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *x, int keylen);
 int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int type, int arg, void *ptr);
 int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *a);

 const EVP_CIPHER *EVP_get_cipherbyname(const char *name);
 #define EVP_get_cipherbynid(a) EVP_get_cipherbyname(OBJ_nid2sn(a))
 #define EVP_get_cipherbyobj(a) EVP_get_cipherbynid(OBJ_obj2nid(a))

 #define EVP_CIPHER_nid(e)              ((e)->nid)
 #define EVP_CIPHER_block_size(e)       ((e)->block_size)
 #define EVP_CIPHER_key_length(e)       ((e)->key_len)
 #define EVP_CIPHER_iv_length(e)                ((e)->iv_len)
 #define EVP_CIPHER_flags(e)            ((e)->flags)
 #define EVP_CIPHER_mode(e)             ((e)->flags) & EVP_CIPH_MODE)
 int EVP_CIPHER_type(const EVP_CIPHER *ctx);

 #define EVP_CIPHER_CTX_cipher(e)       ((e)->cipher)
 #define EVP_CIPHER_CTX_nid(e)          ((e)->cipher->nid)
 #define EVP_CIPHER_CTX_block_size(e)   ((e)->cipher->block_size)
 #define EVP_CIPHER_CTX_key_length(e)   ((e)->key_len)
 #define EVP_CIPHER_CTX_iv_length(e)    ((e)->cipher->iv_len)
 #define EVP_CIPHER_CTX_get_app_data(e) ((e)->app_data)
 #define EVP_CIPHER_CTX_set_app_data(e,d) ((e)->app_data=(char *)(d))
 #define EVP_CIPHER_CTX_type(c)         EVP_CIPHER_type(EVP_CIPHER_CTX_cipher(c))
 #define EVP_CIPHER_CTX_flags(e)                ((e)->cipher->flags)
 #define EVP_CIPHER_CTX_mode(e)         ((e)->cipher->flags & EVP_CIPH_MODE)

 int EVP_CIPHER_param_to_asn1(EVP_CIPHER_CTX *c, ASN1_TYPE *type);
 int EVP_CIPHER_asn1_to_param(EVP_CIPHER_CTX *c, ASN1_TYPE *type);

DESCRIPTION

The cipher routines are a high level interface to certain symmetric ciphers.

EVP_CIPHER_CTX_init() initializes cipher contex ctx.

EVP_EncryptInit_ex() sets up cipher context ctx for encryption with cipher type from

impl. ctx must be initialized before calling this function. type is normally supplied by a function such as EVP_aes_256_cbc(). If impl is then the default implementation is used. key is the symmetric key to use and iv is the to use (if necessary), the actual number of bytes used for the key and depends on the cipher. It is possible to set all parameters to except type in an initial call and supply the remaining parameters in subsequent calls, all of which have type set to This is done when the default cipher parameters are not appropriate.

EVP_EncryptUpdate() encrypts inl bytes from the buffer in and writes the encrypted version to out. This function can be called multiple times to encrypt successive blocks of data. The amount of data written depends on the block alignment of the encrypted data: as a result the amount of data written may be anything from zero bytes to (inl + cipher_block_size - 1) so out should contain sufficient room. The actual number of bytes written is placed in outl.

If padding is enabled (the default) then EVP_EncryptFinal_ex() encrypts the ``final'' data, that is any data that remains in a partial block. It uses standard block padding (aka

padding). The encrypted final data is written to out which should have sufficient space for one cipher block. The number of bytes written is placed in outl. After this function is called the encryption operation is finished and no further calls to EVP_EncryptUpdate() should be made.

If padding is disabled then EVP_EncryptFinal_ex() will not encrypt any more data and it will return an error if any data remains in a partial block: that is if the total data length is not a multiple of the block size.

EVP_DecryptInit_ex(), EVP_DecryptUpdate() and EVP_DecryptFinal_ex() are the corresponding decryption operations. EVP_DecryptFinal() will return an error code if padding is enabled and the final block is not correctly formatted. The parameters and restrictions are identical to the encryption operations except that if padding is enabled the decrypted data buffer out passed to EVP_DecryptUpdate() should have sufficient room for (inl + cipher_block_size) bytes unless the cipher block size is 1 in which case inl bytes is sufficient.

EVP_CipherInit_ex(), EVP_CipherUpdate() and EVP_CipherFinal_ex() are functions that can be used for decryption or encryption. The operation performed depends on the value of the enc parameter. It should be set to 1 for encryption, 0 for decryption and -1 to leave the value unchanged (the actual value of 'enc' being supplied in a previous call).

EVP_CIPHER_CTX_cleanup() clears all information from a cipher context and free up any allocated memory associate with it. It should be called after all operations using a cipher are complete so sensitive information does not remain in memory.

EVP_EncryptInit(), EVP_DecryptInit() and EVP_CipherInit() behave in a similar way to EVP_EncryptInit_ex(), EVP_DecryptInit_ex and EVP_CipherInit_ex() except the ctx parameter does not need to be initialized and they always use the default cipher implementation.

EVP_EncryptFinal(), EVP_DecryptFinal() and EVP_CipherFinal() behave in a similar way to EVP_EncryptFinal_ex(), EVP_DecryptFinal_ex() and EVP_CipherFinal_ex() except ctx is automatically cleaned up after the call.

EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() return an

structure when passed a cipher name, a or an structure.

EVP_CIPHER_nid() and EVP_CIPHER_CTX_nid() return the

of a cipher when passed an or structure. The actual value is an internal value which may not have a corresponding

EVP_CIPHER_CTX_set_padding() enables or disables padding. By default encryption operations are padded using standard block padding and the padding is checked and removed when decrypting. If the pad parameter is zero then no padding is performed, the total amount of data encrypted or decrypted must then be a multiple of the block size or an error will occur.

EVP_CIPHER_key_length() and EVP_CIPHER_CTX_key_length() return the key length of a cipher when passed an

or structure. The constant is the maximum key length for all ciphers. Note: although EVP_CIPHER_key_length() is fixed for a given cipher, the value of EVP_CIPHER_CTX_key_length() may be different for variable key length ciphers.

EVP_CIPHER_CTX_set_key_length() sets the key length of the cipher ctx. If the cipher is a fixed length cipher then attempting to set the key length to any value other than the fixed value is an error.

EVP_CIPHER_iv_length() and EVP_CIPHER_CTX_iv_length() return the

length of a cipher when passed an or . It will return zero if the cipher does not use an The constant is the maximum length for all ciphers.

EVP_CIPHER_block_size() and EVP_CIPHER_CTX_block_size() return the block size of a cipher when passed an

or structure. The constant is also the maximum block length for all ciphers.

EVP_CIPHER_type() and EVP_CIPHER_CTX_type() return the type of the passed cipher or context. This ``type'' is the actual

of the cipher as such it ignores the cipher parameters and 40 bit and 128 bit have the same If the cipher does not have an object identifier or does not have support this function will return NID_undef.

EVP_CIPHER_CTX_cipher() returns the

structure when passed an structure.

EVP_CIPHER_mode() and EVP_CIPHER_CTX_mode() return the block cipher mode:

or If the cipher is a stream cipher then is returned.

EVP_CIPHER_param_to_asn1() sets the AlgorithmIdentifier ``parameter'' based on the passed cipher. This will typically include any parameters and an

The cipher (if any) must be set when this call is made. This call should be made before the cipher is actually ``used'' (before any EVP_EncryptUpdate(), EVP_DecryptUpdate() calls for example). This function may fail if the cipher does not have any support.

EVP_CIPHER_asn1_to_param() sets the cipher parameters based on an

AlgorithmIdentifier ``parameter''. The precise effect depends on the cipher In the case of for example, it will set the and effective key length. This function should be called after the base cipher type is set but before the key is set. For example EVP_CipherInit() will be called with the and key set to EVP_CIPHER_asn1_to_param() will be called and finally EVP_CipherInit() again with all parameters except the key set to It is possible for this function to fail if the cipher does not have any support or the parameters cannot be set (for example the effective key length is not supported.

EVP_CIPHER_CTX_ctrl() allows various cipher specific parameters to be determined and set.

RETURN VALUES

EVP_EncryptInit_ex(), EVP_EncryptUpdate() and EVP_EncryptFinal_ex() return 1 for success and 0 for failure.

EVP_DecryptInit_ex() and EVP_DecryptUpdate() return 1 for success and 0 for failure. EVP_DecryptFinal_ex() returns 0 if the decrypt failed or 1 for success.

EVP_CipherInit_ex() and EVP_CipherUpdate() return 1 for success and 0 for failure. EVP_CipherFinal_ex() returns 0 for a decryption failure or 1 for success.

EVP_CIPHER_CTX_cleanup() returns 1 for success and 0 for failure.

EVP_get_cipherbyname(), EVP_get_cipherbynid() and EVP_get_cipherbyobj() return an

structure or on error.

EVP_CIPHER_nid() and EVP_CIPHER_CTX_nid() return a

EVP_CIPHER_block_size() and EVP_CIPHER_CTX_block_size() return the block size.

EVP_CIPHER_key_length() and EVP_CIPHER_CTX_key_length() return the key length.

EVP_CIPHER_CTX_set_padding() always returns 1.

EVP_CIPHER_iv_length() and EVP_CIPHER_CTX_iv_length() return the

length or zero if the cipher does not use an

EVP_CIPHER_type() and EVP_CIPHER_CTX_type() return the

of the cipher's or NID_undef if it has no defined

EVP_CIPHER_CTX_cipher() returns an

structure.

EVP_CIPHER_param_to_asn1() and EVP_CIPHER_asn1_to_param() return 1 for success or zero for failure.

CIPHER LISTING

All algorithms have a fixed key length unless otherwise stated.

EVP_enc_null()

Null cipher: does nothing.

EVP_des_cbc(void), EVP_des_ecb(void), EVP_des_cfb(void), EVP_des_ofb(void)

DES

in

CBC, ECB, CFB

and

OFB

modes respectively.

EVP_des_ede_cbc(void), EVP_des_ede(), EVP_des_ede_ofb(void), EVP_des_ede_cfb(void)

Two key triple

DES

in

CBC, ECB, CFB

and

OFB

modes respectively.

EVP_des_ede3_cbc(void), EVP_des_ede3(), EVP_des_ede3_ofb(void), EVP_des_ede3_cfb(void)

Three key triple

DES

in

CBC, ECB, CFB

and

OFB

modes respectively.

EVP_desx_cbc(void)

DESX

algorithm in

CBC

mode.

EVP_rc4(void)

RC4

stream cipher. This is a variable key length cipher with default key length 128 bits.

EVP_rc4_40(void)

RC4

stream cipher with 40 bit key length. This is obsolete and new code should use EVP_rc4() and the EVP_CIPHER_CTX_set_key_length() function.

EVP_idea_cbc() EVP_idea_ecb(void), EVP_idea_cfb(void), EVP_idea_ofb(void), EVP_idea_cbc(void)

IDEA

encryption algorithm in

CBC, ECB, CFB

and

OFB

modes respectively.

EVP_rc2_cbc(void), EVP_rc2_ecb(void), EVP_rc2_cfb(void), EVP_rc2_ofb(void)

RC2

encryption algorithm in

CBC, ECB, CFB

and

OFB

modes respectively. This is a variable key length cipher with an additional parameter called ``effective key bits'' or ``effective key length''. By default both are set to 128 bits.

EVP_rc2_40_cbc(void), EVP_rc2_64_cbc(void)

RC2

algorithm in

CBC

mode with a default key length and effective key length of 40 and 64 bits. These are obsolete and new code should use EVP_rc2_cbc(), EVP_CIPHER_CTX_set_key_length() and EVP_CIPHER_CTX_ctrl() to set the key length and effective key length.

EVP_bf_cbc(void), EVP_bf_ecb(void), EVP_bf_cfb(void), EVP_bf_ofb(void);

Blowfish encryption algorithm in

CBC, ECB, CFB

and

OFB

modes respectively. This is a variable key length cipher.

EVP_cast5_cbc(void), EVP_cast5_ecb(void), EVP_cast5_cfb(void), EVP_cast5_ofb(void)

CAST

encryption algorithm in

CBC, ECB, CFB

and

OFB

modes respectively. This is a variable key length cipher.

EVP_rc5_32_12_16_cbc(void), EVP_rc5_32_12_16_ecb(void), EVP_rc5_32_12_16_cfb(void), EVP_rc5_32_12_16_ofb(void)

RC5

encryption algorithm in

CBC, ECB, CFB

and

OFB

modes respectively. This is a variable key length cipher with an additional ``number of rounds'' parameter. By default the key length is set to 128 bits and 12 rounds.

EVP_aes_128_gcm(void), EVP_aes_192_gcm(void), EVP_aes_256_gcm(void)

AES

Galois Counter Mode (

GCM

) for 128, 192 and 256 bit keys respectively. These ciphers require additional control operations to function correctly: see ``

GCM

mode'' section below for details.

EVP_aes_128_ccm(void), EVP_aes_192_ccm(void), EVP_aes_256_ccm(void)

AES

Counter with CBC-MAC Mode (

CCM

) for 128, 192 and 256 bit keys respectively. These ciphers require additional control operations to function correctly: see

CCM

mode section below for details.

GCM Mode

For mode ciphers the behaviour of the interface is subtly altered and several specific ctrl operations are supported.

To specify any additional authenticated data (

) a call to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() should be made with the output parameter out set to .

When decrypting the return value of EVP_DecryptFinal() or EVP_CipherFinal() indicates if the operation was successful. If it does not indicate success the authentication operation has failed and any output data

be used as it is corrupted.

The following ctrls are supported in

mode:

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL);

Sets the

length: this call can only be made before specifying an If not called a default length is used (96 bits for ).

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, taglen, tag);

Writes taglen bytes of the tag value to the buffer indicated by tag. This call can only be made when encrypting data and after all data has been processed (e.g. after an EVP_EncryptFinal() call).

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_TAG, taglen, tag);

Sets the expected tag to taglen bytes from tag. This call is only legal when decrypting data and must be made before any data is processed (e.g. before any EVP_DecryptUpdate() call).

See

below for an example of the use of mode.

CCM Mode

The behaviour of mode ciphers is similar to mode but with a few additional requirements and different ctrl values.

Like

mode any additional authenticated data () is passed by calling EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() with the output parameter out set to . Additionally the total plaintext or ciphertext length be passed to EVP_CipherUpdate(), EVP_EncryptUpdate() or EVP_DecryptUpdate() with the output and input parameters (in and out) set to and the length passed in the inl parameter.

The following ctrls are supported in

mode:

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_SET_TAG, taglen, tag);

This call is made to set the expected

tag value when decrypting or the length of the tag (with the tag parameter set to ) when encrypting. The tag length is often referred to as M. If not set a default value is used (12 for ).

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_SET_L, ivlen, NULL);

Sets the

L value. If not set a default is used (8 for ).

 EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_CCM_SET_IVLEN, ivlen, NULL);

Sets the

nonce () length: this call can only be made before specifying an nonce value. The nonce length is given by 15 - L so it is 7 by default for

NOTES

Where possible the interface to symmetric ciphers should be used in preference to the low level interfaces. This is because the code then becomes transparent to the cipher used and much more flexible. Additionally, the interface will ensure the use of platform specific cryptographic acceleration such as AES-NI (the low level interfaces do not provide the guarantee).

padding works by adding n padding bytes of value n to make the total length of the encrypted data a multiple of the block size. Padding is always added so if the data is already a multiple of the block size n will equal the block size. For example if the block size is 8 and 11 bytes are to be encrypted then 5 padding bytes of value 5 will be added.

When decrypting the final block is checked to see if it has the correct form.

Although the decryption operation can produce an error if padding is enabled, it is not a strong test that the input data or key is correct. A random block has better than 1 in 256 chance of being of the correct format and problems with the input data earlier on will not produce a final decrypt error.

If padding is disabled then the decryption operation will always succeed if the total amount of data decrypted is a multiple of the block size.

The functions EVP_EncryptInit(), EVP_EncryptFinal(), EVP_DecryptInit(), EVP_CipherInit() and EVP_CipherFinal() are obsolete but are retained for compatibility with existing code. New code should use EVP_EncryptInit_ex(), EVP_EncryptFinal_ex(), EVP_DecryptInit_ex(), EVP_DecryptFinal_ex(), EVP_CipherInit_ex() and EVP_CipherFinal_ex() because they can reuse an existing context without allocating and freeing it up on each call.

BUGS

For the number of rounds can currently only be set to 8, 12 or 16. This is a limitation of the current code rather than the interface.

and only refer to the internal ciphers with default key lengths. If custom ciphers exceed these values the results are unpredictable. This is because it has become standard practice to define a generic key as a fixed unsigned char array containing bytes.

The

code is incomplete (and sometimes inaccurate) it has only been tested for certain common S/MIME ciphers ( triple ) in mode.

EXAMPLES

Encrypt a string using

 int do_crypt(char *outfile)
        {
        unsigned char outbuf[1024];
        int outlen, tmplen;
        /* Bogus key and IV: we'd normally set these from
         * another source.
         */
        unsigned char key[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};
        unsigned char iv[] = {1,2,3,4,5,6,7,8};
        char intext[] = "Some Crypto Text";
        EVP_CIPHER_CTX ctx;
        FILE *out;

        EVP_CIPHER_CTX_init(&ctx);
        EVP_EncryptInit_ex(&ctx, EVP_idea_cbc(), NULL, key, iv);

        if(!EVP_EncryptUpdate(&ctx, outbuf, &outlen, intext, strlen(intext)))
                {
                /* Error */
                return 0;
                }
        /* Buffer passed to EVP_EncryptFinal() must be after data just
         * encrypted to avoid overwriting it.
         */
        if(!EVP_EncryptFinal_ex(&ctx, outbuf + outlen, &tmplen))
                {
                /* Error */
                return 0;
                }
        outlen += tmplen;
        EVP_CIPHER_CTX_cleanup(&ctx);
        /* Need binary mode for fopen because encrypted data is
         * binary data. Also cannot use strlen() on it because
         * it wont be null terminated and may contain embedded
         * nulls.
         */
        out = fopen(outfile, "wb");
        fwrite(outbuf, 1, outlen, out);
        fclose(out);
        return 1;
        }

The ciphertext from the above example can be decrypted using the openssl utility with the command line (shown on two lines for clarity):

 openssl idea -d <filename
          -K 000102030405060708090A0B0C0D0E0F -iv 0102030405060708

General encryption and decryption function example using

and with a 128-bit key:

 int do_crypt(FILE *in, FILE *out, int do_encrypt)
        {
        /* Allow enough space in output buffer for additional block */
        unsigned char inbuf[1024], outbuf[1024 + EVP_MAX_BLOCK_LENGTH];
        int inlen, outlen;
        EVP_CIPHER_CTX ctx;
        /* Bogus key and IV: we'd normally set these from
         * another source.
         */
        unsigned char key[] = "0123456789abcdeF";
        unsigned char iv[] = "1234567887654321";

        /* Don't set key or IV right away; we want to check lengths */
        EVP_CIPHER_CTX_init(&ctx);
        EVP_CipherInit_ex(&ctx, EVP_aes_128_cbc(), NULL, NULL, NULL,
                do_encrypt);
        OPENSSL_assert(EVP_CIPHER_CTX_key_length(&ctx) == 16);
        OPENSSL_assert(EVP_CIPHER_CTX_iv_length(&ctx) == 16);

        /* Now we can set key and IV */
        EVP_CipherInit_ex(&ctx, NULL, NULL, key, iv, do_encrypt);

        for(;;) 
                {
                inlen = fread(inbuf, 1, 1024, in);
                if(inlen <= 0) break;
                if(!EVP_CipherUpdate(&ctx, outbuf, &outlen, inbuf, inlen))
                        {
                        /* Error */
                        EVP_CIPHER_CTX_cleanup(&ctx);
                        return 0;
                        }
                fwrite(outbuf, 1, outlen, out);
                }
        if(!EVP_CipherFinal_ex(&ctx, outbuf, &outlen))
                {
                /* Error */
                EVP_CIPHER_CTX_cleanup(&ctx);
                return 0;
                }
        fwrite(outbuf, 1, outlen, out);

        EVP_CIPHER_CTX_cleanup(&ctx);
        return 1;
        }

SEE ALSO

evp(3)

HISTORY

EVP_CIPHER_CTX_init(), EVP_EncryptInit_ex(), EVP_EncryptFinal_ex(), EVP_DecryptInit_ex(), EVP_DecryptFinal_ex(), EVP_CipherInit_ex(), EVP_CipherFinal_ex() and EVP_CIPHER_CTX_set_padding() appeared in OpenSSL 0.9.7.

appeared in OpenSSL 0.9.7 but was often disabled due to patent concerns; the last patents expired in 2012.