Crypt::SSLeay (3)

Leading comments

Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/Crypt::SSLeay.3pm".)

NAME

Crypt::SSLeay - OpenSSL support for LWP

HEARTBLEED WARNING

"perl Makefile.PL" will display a warning if it thinks your OpenSSL might be vulnerable to the Heartbleed Bug <cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0160>. You can, of course, go ahead and install the module, but you should be aware that your system might be exposed to an extremely serious vulnerability. This is just a heuristic based on the version reported by OpenSSL. It is entirely possible that your distrbution actually pushed a patched library, so if you have concerns, you should investigate further.

SYNOPSIS

    use Net::SSL;
    use LWP::UserAgent;

    my $ua  = LWP::UserAgent->new(
        ssl_opts => { verify_hostname => 0 },
    );

    my $response = $ua->get('https://www.example.com/');
    print $response->content, "\n";

DESCRIPTION

This Perl module provides support for the protocol under , to allow an LWP::UserAgent object to perform and requests over encrypted socket connections. Please see for more information on requests.

The "Crypt::SSLeay" package provides "Net::SSL", which, if requested, is loaded by "LWP::Protocol::https" for https requests and provides the necessary

glue.

This distribution also makes following deprecated modules available:

    Crypt::SSLeay::CTX
    Crypt::SSLeay::Conn
    Crypt::SSLeay::X509

DO YOU NEED Crypt::SSLeay?

Starting with version 6.02 of , "https" support was unbundled into LWP::Protocol::https. This module specifies as one of its prerequisites IO::Socket::SSL which is automatically used by LWP::UserAgent unless this preference is overridden separately. "IO::Socket::SSL" is a more complete implementation, and, crucially, it allows hostname verification. "Crypt::SSLeay" does not support this. At this point, "Crypt::SSLeay" is maintained to support existing software that already depends on it. However, it is possible that your software does not really depend on "Crypt::SSLeay", only on the ability of "LWP::UserAgent" class to communicate with sites over

If are using version "LWP" 6.02 or later, and therefore have installed "LWP::Protocol::https" and its dependencies, and do not explicitly "use" "Net::SSL" before loading "LWP::UserAgent", or override the default socket class, you are probably using "IO::Socket::SSL" and do not really need "Crypt::SSLeay".

If you have both "Crypt::SSLeay" and "IO::Socket::SSL" installed, and would like to force "LWP::UserAgent" to use "Crypt::SSLeay", you can use:

    use Net::HTTPS;
    $Net::HTTPS::SSL_SOCKET_CLASS = 'Net::SSL';
    use LWP::UserAgent;

or

    local $ENV{PERL_NET_HTTPS_SSL_SOCKET_CLASS} = 'Net::SSL';
    use LWP::UserAgent;

or

    use Net::SSL;
    use LWP::UserAgent;

ENVIRONMENT VARIABLES

Specify

SSL

Socket Class

$ENV{PERL_NET_HTTPS_SSL_SOCKET_CLASS} can be used to instruct "LWP::UserAgent" to use "Net::SSL" for

HTTPS

support rather than "IO::Socket::SSL".

Proxy Support

    $ENV{HTTPS_PROXY} = 'proxy_hostname_or_ip:port';

Proxy Basic Authentication

    $ENV{HTTPS_PROXY_USERNAME} = 'username';
    $ENV{HTTPS_PROXY_PASSWORD} = 'password';

SSL

diagnostics and Debugging

    $ENV{HTTPS_DEBUG} = 1;

Default

SSL

Version

    $ENV{HTTPS_VERSION} = '3';

Client Certificate Support

    $ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
    $ENV{HTTPS_KEY_FILE}  = 'certs/notacakeynopass.pem';

CA

cert Peer Verification

    $ENV{HTTPS_CA_FILE}   = 'certs/ca-bundle.crt';
    $ENV{HTTPS_CA_DIR}    = 'certs/';

Client

PKCS12

cert support

    $ENV{HTTPS_PKCS12_FILE}     = 'certs/pkcs12.pkcs12';
    $ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';

INSTALL

OpenSSL

You must have OpenSSL installed before compiling this module. You can get the latest OpenSSL package from <www.openssl.org/source>. We no longer support pre-2000 versions of OpenSSL.

If you are building OpenSSL from source, please follow the directions included in the source package.

Crypt::SSLeay via Makefile.PL

"Makefile.PL" accepts the following command line arguments:

incpath

Path to OpenSSL headers. Can also be specified via $ENV{OPENSSL_INCLUDE}. If the command line argument is provided, it overrides any value specified via the environment variable. Of course, you can ignore both the command line argument and the environment variable, and just add the path to your compiler specific environment variable such as "CPATH" or "INCLUDE" etc.

libpath

Path to OpenSSL libraries. Can also be specified via $ENV{OPENSSL_LIB}. If the command line argument is provided, it overrides any value specified by the environment variable. Of course, you can ignore both the command line argument and the environment variable and just add the path to your compiler specific environment variable such as "LIBRARY_PATH" or "LIB" etc.

live-tests

Use "--live-tests" to request tests that try to connect to an external web site, and "--no-live_tests" to prevent such tests from running. If you run "Makefile.PL" interactively, and this argument is not specified on the command line, you will be prompted for a value.

Default is false.

static

Boolean. Default is false.

TODO

: Does it work?

verbose

Boolean. Default is false. If you pass "--verbose" on the command line, both "Devel::CheckLib" and "ExtUtils::CBuilder" instances will be configured to echo what they are doing.

If everything builds

but you get failures when during tests, ensure that "LD_LIBRARY_PATH" points to the location where the correct shared libraries are located.

If you are using a custom OpenSSL build, please keep in mind that "Crypt::SSLeay" must be built using the same compiler and build tools used to build "perl" and OpenSSL. This can be more of an issue on Windows. If you are using Active State Perl, install the MinGW package distributed by them, and build OpenSSL using that before trying to build this module. If you have built your own Perl using Microsoft

tools or IDEs, make sure you build OpenSSL using the same tools.

Depending on your

pre-built OpenSSL packages may be available. To get the require headers and import libraries, you may need to install a development version of your operating system's OpenSSL library package. The key is that "Crypt::SSLeay" makes calls to the OpenSSL library, and how to do so is specified in the C header files that come with the library. Some systems break out the header files into a separate package from that of the libraries. Once the program has been built, you don't need the headers any more.

Crypt::SSLeay

The latest Crypt::SSLeay can be found at your nearest mirror, as well as <metacpan.org/pod/Crypt::SSLeay>.

Once you have downloaded it, "Crypt::SSLeay" installs easily using the standard build process:

    $ perl Makefile.PL
    $ make
    $ make test
    $ make install

or

    $ cpanm Crypt::SSLeay

If you have OpenSSL headers and libraries in nonstandard locations, you can use

    $ perl Makefile.PL --incpath=... --libpath=...

If you would like to use "cpanm" with such custom locations, you can do

    $ OPENSSL_INCLUDE=... OPENSSL_LIB=... cpanm Crypt::SSLeay

or, on Windows,

    > set OPENSSL_INCLUDE=...
    > set OPENSSL_LIB=...
    > cpanm Crypt::SSLeay

If you are on Windows, and using a MinGW distribution bundled with ActiveState Perl or Strawberry Perl, you would use "dmake" rather than "make". If you are using Microsoft's build tools, you would use "nmake".

For unattended (batch) installations, to be absolutely certain that Makefile.PL does not prompt for questions on

set the environment variable "PERL_MM_USE_DEFAULT=1" as with any module built using ExtUtils::MakeMaker.

I do not have any experience with

If OpenSSL headers and libraries are not in standard locations searched by your build system by default, please set things up so that they are. If you have generic instructions on how to do it, please open a ticket on with the information so I can add it to this document.

PROXY SUPPORT

LWP::UserAgent and Crypt::SSLeay have their own versions of proxy support. Please read these sections to see which one is appropriate.

LWP::UserAgent proxy support

"LWP::UserAgent" has its own methods of proxying which may work for you and is likely to be incompatible with "Crypt::SSLeay" proxy support. To use "LWP::UserAgent" proxy support, try something like:

    my $ua = LWP::UserAgent->new;
    $ua->proxy([qw( https http )], "$proxy_ip:$proxy_port");

At the time of this writing, libwww v5.6 seems to proxy https requests fine with an Apache mod_proxy server. It sends a line like:

    GET https://www.example.com HTTP/1.1

to the proxy server, which is not the "CONNECT" request that some proxies would expect, so this may not work with other proxy servers than mod_proxy. The "CONNECT" method is used by "Crypt::SSLeay"'s internal proxy support.

Crypt::SSLeay proxy support

For native "Crypt::SSLeay" proxy support of https requests, you need to set the environment variable "HTTPS_PROXY" to your proxy server and port, as in:

    # proxy support
    $ENV{HTTPS_PROXY} = 'proxy_hostname_or_ip:port';
    $ENV{HTTPS_PROXY} = '127.0.0.1:8080';

Use of the "HTTPS_PROXY" environment variable in this way is similar to "LWP::UserAgent-"env_proxy()> usage, but calling that method will likely override or break the "Crypt::SSLeay" support, so do not mix the two.

Basic auth credentials to the proxy server can be provided this way:

    # proxy_basic_auth
    $ENV{HTTPS_PROXY_USERNAME} = 'username';
    $ENV{HTTPS_PROXY_PASSWORD} = 'password';

For an example of

scripting with "Crypt::SSLeay" native proxy support, please look at the eg/lwp-ssl-test script in the "Crypt::SSLeay" distribution.

CLIENT CERTIFICATE SUPPORT

Client certificates are supported. encoded certificate and private key files may be used like this:

    $ENV{HTTPS_CERT_FILE} = 'certs/notacacert.pem';
    $ENV{HTTPS_KEY_FILE}  = 'certs/notacakeynopass.pem';

You may test your files with the eg/net-ssl-test program, bundled with the distribution, by issuing a command like:

    perl eg/net-ssl-test -cert=certs/notacacert.pem \
        -key=certs/notacakeynopass.pem -d GET $HOST_NAME

Additionally, if you would like to tell the client where the

file is, you may set these.

    $ENV{HTTPS_CA_FILE} = "some_file";
    $ENV{HTTPS_CA_DIR}  = "some_dir";

Note that, if specified, $ENV{HTTPS_CA_FILE} must point to the actual certificate file. That is, $ENV{HTTPS_CA_DIR} is *not* the path were $ENV{HTTPS_CA_FILE} is located.

For certificates in $ENV{HTTPS_CA_DIR} to be picked up, follow the instructions on <www.openssl.org/docs/ssl/SSL_CTX_load_verify_locations.html>

There is no sample

cert file at this time for testing, but you may configure eg/net-ssl-test to use your cert with the -CAfile option.

(

then what is the ./certs directory in the distribution?)

Creating a test certificate

To create simple test certificates with OpenSSL, you may run the following command:

    openssl req -config /usr/local/openssl/openssl.cnf \
        -new -days 365 -newkey rsa:1024 -x509 \
        -keyout notacakey.pem -out notacacert.pem

To remove the pass phrase from the key file, run:

    openssl rsa -in notacakey.pem -out notacakeynopass.pem

PKCS12

support

The directives for enabling use of certificates is:

    $ENV{HTTPS_PKCS12_FILE}     = 'certs/pkcs12.pkcs12';
    $ENV{HTTPS_PKCS12_PASSWORD} = 'PKCS12_PASSWORD';

Use of this type of certificate takes precedence over previous certificate settings described.

(

unclear? Meaning ``the presence of this type of certificate''?)

SSL versions

"Crypt::SSLeay" tries very hard to connect to any web server accommodating servers that are buggy, old or simply not standards-compliant. To this effect, this module will try connections in this order:

SSL

v23

should allow v2 and v3 servers to pick their best type

SSL

v3

best connection type

SSL

v2

old connection type

Unfortunately, some servers seem not to handle a reconnect to

v3 after a failed connect of v23 is tried, so you may set before using or Net::SSL:

    $ENV{HTTPS_VERSION} = 3;

to force a version 3

connection first. At this time only a version 2 connection will be tried after this, as the connection attempt order remains unchanged by this setting.

ACKNOWLEDGEMENTS

Many thanks to the following individuals who helped improve "Crypt-SSLeay":

Gisle Aas for writing this module and many others including libwww, for perl. The web will never be the same :)

Ben Laurie deserves kudos for his excellent patches for better error handling,

information inspection, and random seeding.

Dongqiang Bai for host name resolution fix when using a proxy.

Stuart Horner of Core Communications, Inc. who found the need for building "--shared" OpenSSL libraries.

Pavel Hlavnicka for a patch for freeing memory when using a pkcs12 file, and for inspiring more robust "read()" behavior.

James Woodyatt is a champ for finding a ridiculous memory leak that has been the bane of many a Crypt::SSLeay user.

Bryan Hart for his patch adding proxy support, and thanks to Tobias Manthey for submitting another approach.

Alex Rhomberg for Alpha linux ccc patch.

Tobias Manthey for his patches for client certificate support.

Daisuke Kuroda for adding

certificate support.

Gamid Isayev for

cert support and insights into error messaging.

Jeff Long for working through a tricky

cert SSLClientVerify issue.

Chip Turner for a patch to build under perl 5.8.0.

Joshua Chamas for the time he spent maintaining the module.

Jeff Lavallee for help with alarms on read failures (

bug #12444).

Guenter Knauf for significant improvements in configuring things in Win32 and Netware lands and Jan Dubois for various suggestions for improvements.

and many others who provided bug reports, suggestions, fixes and patches.

If you have reported a bug or provided feedback, and you would like to be mentioned by name in this section, please file request on rt.cpan.org <rt.cpan.org/NoAuth/Bugs.html?Dist=Crypt-SSLeay>.

SEE ALSO

Net::SSL

If you have downloaded this distribution as of a dependency of another distribution, it's probably due to this module (which is included in this distribution).

Net::SSLeay

Net::SSLeay provides access to the OpenSSL

API

directly from Perl. See <metacpan.org/pod/Net::SSLeay>.

Building OpenSSL on 64-bit Windows 8.1 Pro using

SDK

tools

My blog post <blog.nu42.com/2014/04/building-openssl-101g-on-64-bit-windows.html> might be helpful.

SUPPORT

For issues related to using of "Crypt::SSLeay" & "Net::SSL" with Perl's , please send email to "libwww@perl.org".

For OpenSSL or general

support, including issues associated with building and installing OpenSSL on your system, please email the OpenSSL users mailing list at "openssl-users@openssl.org". See <www.openssl.org/support/community.html> for other mailing lists and archives.

Please report all bugs using rt.cpan.org <rt.cpan.org/NoAuth/Bugs.html?Dist=Crypt-SSLeay>.

AUTHORS

This module was originally written by Gisle Aas, and was subsequently maintained by Joshua Chamas, David Landgren, brian d foy and Sinan Unur.

COPYRIGHT

Copyright (c) 2010-2014 A. Sinan Unur

Copyright (c) 2006-2007 David Landgren

Copyright (c) 1999-2003 Joshua Chamas

Copyright (c) 1998 Gisle Aas

LICENSE

This program is free software; you can redistribute it and/or modify it under the terms of Artistic License 2.0 (see <www.perlfoundation.org/artistic_license_2_0>).