Config::Model::models::LCDd::CFontzPacket (3)

Leading comments

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man3/Config::Model::models::LCDd::CFontzPacket.3pm".)

NAME

Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

Elements

Brightness

Set the initial brightness Optional. Type integer. upstream_default: '1000'.

Contrast

Set the initial contrast Optional. Type integer. upstream_default: '560'.

Device

Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

Model

Select the model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.

OffBrightness

Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer. upstream_default: '0'.

OldFirmware

Very old 633 firmware versions do not support partial screen updates using 'Send Data to ' command (31). For those devices it may be necessary to enable this flag. Optional. Type boolean. upstream_default: 'no'.

Reboot

Reinitialize the 's on driver start. Optional. Type boolean. upstream_default: 'no'.

Size

Override the size known for the selected model. Usually setting this value should not be necessary. Optional. Type uniline. upstream_default: '20x4'.

Speed

Override the default communication speed known for the selected model. Default value depends on model Optional. Type enum. choice: '19200', '115200'.

USB

Enable the flag if the device is connected to an port. For serial ports leave it disabled. Optional. Type boolean. upstream_default: 'no'.

SEE ALSO

*

cme