statfs64 (2)
Leading comments
Copyright (C) 2003 Andries Brouwer (aeb@cwi.nl) %%%LICENSE_START(VERBATIM) Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Since the L...
NAME
statfs, fstatfs - get filesystem statisticsSYNOPSIS
#include <sys/vfs.h> /* or <sys/statfs.h> */
int statfs(const char *path, struct statfs *buf);
int fstatfs(int fd, struct statfs *buf);
DESCRIPTION
The statfs() system call returns information about a mounted filesystem. path is the pathname of any file within the mounted filesystem. buf is a pointer to a statfs structure defined approximately as follows:
struct statfs {
__fsword_t f_type; /* Type of filesystem (see below) */
__fsword_t f_bsize; /* Optimal transfer block size */
fsblkcnt_t f_blocks; /* Total data blocks in filesystem */
fsblkcnt_t f_bfree; /* Free blocks in filesystem */
fsblkcnt_t f_bavail; /* Free blocks available to
unprivileged user */
fsfilcnt_t f_files; /* Total file nodes in filesystem */
fsfilcnt_t f_ffree; /* Free file nodes in filesystem */
fsid_t f_fsid; /* Filesystem ID */
__fsword_t f_namelen; /* Maximum length of filenames */
__fsword_t f_frsize; /* Fragment size (since Linux 2.6) */
__fsword_t f_flags; /* Mount flags of filesystem
(since Linux 2.6.36) */
__fsword_t f_spare[xxx];
/* Padding bytes reserved for future use */
};
Filesystem types:
ADFS_SUPER_MAGIC 0xadf5
AFFS_SUPER_MAGIC 0xADFF
BDEVFS_MAGIC 0x62646576
BEFS_SUPER_MAGIC 0x42465331
BFS_MAGIC 0x1BADFACE
BINFMTFS_MAGIC 0x42494e4d
BTRFS_SUPER_MAGIC 0x9123683E
CGROUP_SUPER_MAGIC 0x27e0eb
CIFS_MAGIC_NUMBER 0xFF534D42
CODA_SUPER_MAGIC 0x73757245
COH_SUPER_MAGIC 0x012FF7B7
CRAMFS_MAGIC 0x28cd3d45
DEBUGFS_MAGIC 0x64626720
DEVFS_SUPER_MAGIC 0x1373
DEVPTS_SUPER_MAGIC 0x1cd1
EFIVARFS_MAGIC 0xde5e81e4
EFS_SUPER_MAGIC 0x00414A53
EXT_SUPER_MAGIC 0x137D
EXT2_OLD_SUPER_MAGIC 0xEF51
EXT2_SUPER_MAGIC 0xEF53
EXT3_SUPER_MAGIC 0xEF53
EXT4_SUPER_MAGIC 0xEF53
FUSE_SUPER_MAGIC 0x65735546
FUTEXFS_SUPER_MAGIC 0xBAD1DEA
HFS_SUPER_MAGIC 0x4244
HOSTFS_SUPER_MAGIC 0x00c0ffee
HPFS_SUPER_MAGIC 0xF995E849
HUGETLBFS_MAGIC 0x958458f6
ISOFS_SUPER_MAGIC 0x9660
JFFS2_SUPER_MAGIC 0x72b6
JFS_SUPER_MAGIC 0x3153464a
MINIX_SUPER_MAGIC 0x137F /* orig. minix */
MINIX_SUPER_MAGIC2 0x138F /* 30 char minix */
MINIX2_SUPER_MAGIC 0x2468 /* minix V2 */
MINIX2_SUPER_MAGIC2 0x2478 /* minix V2, 30 char names */
MINIX3_SUPER_MAGIC 0x4d5a /* minix V3 fs, 60 char names */
MQUEUE_MAGIC 0x19800202
MSDOS_SUPER_MAGIC 0x4d44
NCP_SUPER_MAGIC 0x564c
NFS_SUPER_MAGIC 0x6969
NILFS_SUPER_MAGIC 0x3434
NTFS_SB_MAGIC 0x5346544e
OCFS2_SUPER_MAGIC 0x7461636f
OPENPROM_SUPER_MAGIC 0x9fa1
PIPEFS_MAGIC 0x50495045
PROC_SUPER_MAGIC 0x9fa0
PSTOREFS_MAGIC 0x6165676C
QNX4_SUPER_MAGIC 0x002f
QNX6_SUPER_MAGIC 0x68191122
RAMFS_MAGIC 0x858458f6
REISERFS_SUPER_MAGIC 0x52654973
ROMFS_MAGIC 0x7275
SELINUX_MAGIC 0xf97cff8c
SMACK_MAGIC 0x43415d53
SMB_SUPER_MAGIC 0x517B
SOCKFS_MAGIC 0x534F434B
SQUASHFS_MAGIC 0x73717368
SYSFS_MAGIC 0x62656572
SYSV2_SUPER_MAGIC 0x012FF7B6
SYSV4_SUPER_MAGIC 0x012FF7B5
TMPFS_MAGIC 0x01021994
UDF_SUPER_MAGIC 0x15013346
UFS_MAGIC 0x00011954
USBDEVICE_SUPER_MAGIC 0x9fa2
V9FS_MAGIC 0x01021997
VXFS_SUPER_MAGIC 0xa501FCF5
XENFS_SUPER_MAGIC 0xabba1974
XENIX_SUPER_MAGIC 0x012FF7B4
XFS_SUPER_MAGIC 0x58465342
_XIAFS_SUPER_MAGIC 0x012FD16D
Most of these MAGIC constants are defined in
/usr/include/linux/magic.h,
and some are hardcoded in kernel sources.
The
f_flags
is a bit mask indicating mount options for the file system.
It contains zero or more of the following bits:
- ST_MANDLOCK
- Mandatory locking is permitted on the filesystem (see fcntl(2)).
- ST_NOATIME
- Do not update access times; see mount(2).
- ST_NODEV
- Disallow access to device special files on this filesystem.
- ST_NODIRATIME
- Do not update directory access times; see mount(2).
- ST_NOEXEC
- Execution of programs is disallowed on this filesystem.
- ST_NOSUID
- The set-user-ID and set-group-ID bits are ignored by exec(3) for executable files on this filesystem
- ST_RDONLY
- This filesystem is mounted read-only.
- ST_RELATIME
- Update atime relative to mtime/ctime; see mount(2).
- ST_SYNCHRONOUS
- Writes are synched to the filesystem immediately (see the description of O_SYNC in open(2)).
Nobody knows what f_fsid is supposed to contain (but see below).
Fields that are undefined for a particular filesystem are set to 0.
fstatfs()
returns the same information about an open file referenced by descriptor
fd.
RETURN VALUE
On success, zero is returned. On error, -1 is returned, and errno is set appropriately.ERRORS
- EACCES
- (statfs()) Search permission is denied for a component of the path prefix of path. (See also path_resolution(7).)
- EBADF
- (fstatfs()) fd is not a valid open file descriptor.
- EFAULT
- buf or path points to an invalid address.
- EINTR
- This call was interrupted by a signal.
- EIO
- An I/O error occurred while reading from the filesystem.
- ELOOP
- (statfs()) Too many symbolic links were encountered in translating path.
- ENAMETOOLONG
- (statfs()) path is too long.
- ENOENT
- (statfs()) The file referred to by path does not exist.
- ENOMEM
- Insufficient kernel memory was available.
- ENOSYS
- The filesystem does not support this call.
- ENOTDIR
- (statfs()) A component of the path prefix of path is not a directory.
- EOVERFLOW
- Some values were too large to be represented in the returned struct.
CONFORMING TO
Linux-specific. The Linux statfs() was inspired by the 4.4BSD one (but they do not use the same structure).NOTES
The __fsword_t type used for various fields in the statfs structure definition is a glibc internal type, not intended for public use. This leaves the programmer in a bit of a conundrum when trying to copy or compare these fields to local variables in a program. Using unsigned int for such variables suffices on most systems.The original Linux statfs() and fstatfs() system calls were not designed with extremely large file sizes in mind. Subsequently, Linux 2.6 added new statfs64() and fstatfs64() system calls that employ a new structure, statfs64. The new structure contains the same fields as the original statfs structure, but the sizes of various fields are increased, to accommodate large file sizes. The glibc statfs() and fstatfs() wrapper functions transparently deal with the kernel differences.
Some systems have only <sys/vfs.h>, other systems also have <sys/statfs.h>, where the former includes the latter. So it seems including the former is the best choice.
LSB has deprecated the library calls statfs() and fstatfs() and tells us to use statvfs(2) and fstatvfs(2) instead.
The f_fsid field
Solaris, Irix and POSIX have a system call statvfs(2) that returns a struct statvfs (defined in <sys/statvfs.h>) containing an unsigned long f_fsid. Linux, SunOS, HP-UX, 4.4BSD have a system call statfs() that returns a struct statfs (defined in <sys/vfs.h>) containing a fsid_t f_fsid, where fsid_t is defined as struct { int val[2]; }. The same holds for FreeBSD, except that it uses the include file <sys/mount.h>.The general idea is that f_fsid contains some random stuff such that the pair (f_fsid,ino) uniquely determines a file. Some operating systems use (a variation on) the device number, or the device number combined with the filesystem type. Several operating systems restrict giving out the f_fsid field to the superuser only (and zero it for unprivileged users), because this field is used in the filehandle of the filesystem when NFS-exported, and giving it out is a security concern.
Under some operating systems, the fsid can be used as the second argument to the sysfs(2) system call.