CONNECTION STRINGS

:DISPLAY

tcp:[USERNAME@]HOST:PORT[:DISPLAY]

ssh/[USERNAME[:PASSWORD]@]HOST[:SSH_PORT]/DISPLAY

EXAMPLES

xpra start :7

Start an xpra server using display number :7.

xpra start ssh:bigbox:7 --start=xterm

Start an xpra server on bigbox with an xterm in it, and connect to it.

DISPLAY=:7 firefox

Start firefox running inside the xpra server. Run this on the host where xpra was started or in terminal forwarded by xpra. No window will appear until you attach with xpra attach.

xpra list

Show a list of xpra servers you have running on the current host.

xpra showconfig

Shows the configuration that would be used with other sub-commands, taking into account the command line arguments.

xpra attach :7

Attach to the xpra server that is using local display number :7. Any apps running on that server will appear on your screen.

xpra attach ssh:foo@frodo:7

Use ssh to attach to the xpra server that is running on machine frodo as user foo and using display :7. Any apps running on that server will appear on your local screen.

xpra start :7 && DISPLAY=:7 screen

Start an xpra server and a screen(1) session. If any of the applications inside screen attempt to use X, they will be directed to the xpra server.

DISPLAYS

*

Every X or xpra server that is running on a single machine must use a different display name. If you pick a number that is already in use then xpra will not work.

*

The first few numbers (0, 1, 2) are commonly used by real X servers.

*

Everyone who connects to a given machine using ssh(1) with X forwarding enabled will also use a display number; ssh generally picks numbers near ten (10, 11, 12, ...).

When specifying an xpra server to a client program like xpra attach, xpra detach, xpra stop, xpra exit, xpra version, xpra info, xpra list or xpra screenshot then you can use a display of the form :DISPLAY to refer to a server on the local host, or one of the form ssh:[USER@]HOST:DISPLAY to refer to a server on a remote host; xpra will automatically connect to the remote host using ssh(1). Generally, if you have only one xpra session running on a machine (which you can verify by running xpra list on that machine), then you can omit the number entirely; xpra attach alone will attach to the lone xpra server on the current machine regardless of its number, xpra attach ssh:frodo will similarly attach to the lone xpra session on a remote machine.
Connecting using the display number assumes that the client and server use the same configuration for socket directories, or at least that the client can find at least one of the directories used by the unix domain sockets (see bind, socket-dir and socket-dirs).
If the xpra server was given the --bind-tcp option when started then you can also connect to it using a display of the form tcp:HOST:PORT. (Notice that ssh: takes an optional display number, while tcp: takes a required port number.)

SUBCOMMANDS

xpra start

xpra attach

xpra detach

xpra screenshot

xpra version

xpra info

xpra control

xpra initenv

xpra stop

xpra exit

xpra showconfig

xpra list

xpra upgrade

xpra shadow

xpra proxy

Important Note

OPTIONS

General options

--version

Displays xpra's version number.

-h, --help

Displays a summary of command line usage.

-d FILTER1,FILTER2,..., --debug=FILTER1,FILTER2,...

Enable debug logging. The special value all enables all debugging.

--mmap=yes|no

Enable or disable memory mapped pixel data transfer. By default it is normally enabled automatically if the server and the client reside on the same filesystem namespace. This method of data transfer offers much lower overheads and reduces both CPU consumption and local network traffic.

--windows=yes|no

Enable or disable the forwarding of windows. This is usually the primary use for xpra and should be enabled.

--clipboard=yes|no|clipboard-type

Enable or disable clipboard synchronization. If disabled on the server, no clients will be able to use clipboard synchronization at all. If turned off on the client, only this particular connection will ignore clipboard data from the server. This can also be used to specify a different clipboard implementation. The clipboard types available will vary from platform to platform and also depend on build time environment and options so this is best left on auto. Other clipboard types available may include:

translated

Clipboard which can translate from one type of selection to another

GDK

The most complete clipboard implementation, includes full X11 support

default

Simple clipboard with limited X11 support

OSX

OSX specific clipboard

--pulseaudio=yes|no

Enable or disable the starting of a pulseaudio server with the session.

--pulseaudio-command=SERVER-START-COMMAND

Specifies the pulseaudio command to use to start the pulseaudio server, unless disabled with pulseaudio=no.

--session-name=VALUE

Sets the name of this session. This value may be used in notifications, utilities, tray menu, etc. Setting this value on the server provides a default value which may be overridden on the client.

--encoding=ENCODING

This specifies the image encoding to use, there are a number of encodings supported: jpeg, png, png/P, png/L, webp, rgb, vp8, vp9, h264 and h265 (some may not be available in your environment).

png

compressed and lossless, can be quite slow.

png/P

compressed and lossy: it uses a colour palette, which means better compression but still slow.

png/L

compressed and lossy: grayscale only using a palette.

rgb

a raw pixel format (lossless) compressed with lz4, lzo or zlib (see compressors) the compression ratio is lower, but it is by far the fastest encoding available.

webp

can be used in lossy or lossless mode, useful for graphical applications, it compresses better than jpeg and is reasonably fast except at high resolutions.

jpeg

can be useful for graphical applications, it is lossy and usually very fast.

vp8

lossy video encoding which always uses colour subsampling. Fast at encoding and decoding.

vp9

Video encoding which supports both lossy and lossless modes, available if your ffmpeg library version is recent enough.

h264

One of the best encoding available: it is fast, efficient and tunable via the quality and speed options.

h265

Far too slow at encoding, avoid.

The default encoding which is automatically selected if you do not specify one will depend on what options are available on both the server and the client: rgb is always available (builtin), jpeg and png require the Python Imaging Library, vp8, vp9, webp, h264 and h265 all require their respective shared libraries, as well as the xpra codec that uses them.
Note: when selecting a video encoding (usually h264, vp8 or fBvp9), it will only be used if the screen is updating quickly enough, some of the smaller screen updates will also be sent using one of the other non-video encodings.

--video-scaling=on|offSCALING How much automatic video downscaling should be used, from 1 (rarely) to 100 (aggressively), 0 to disable. Video scaling is normally used with video regions or very large windows (especially full screen windows) to try to maintain a decent framerate. Video downscaling negatively affects visual quality and will cause automatic refreshes (if enabled), it is most useful on video content where it saves a considerable amount of bandwidth.

--socket-dir=DIR Location where to write and look for the Xpra socket files. The default location varies from platform to platform ("~/.xpra" on most Posix systems). If unspecified, the first value from socket-dirs will be used. It may also be specified using the XPRA_SOCKET_DIR environment variable.
When using the socket-dir option, it is generally necessary to specify socket-dir or socket-dirs on all following commands, for xpra to work with the open sessions.
By specifying a shared directory this can be coupled with the mmap-group or socket-permissions option to connect Xpra sessions across user accounts.

--socket-dirs=DIR Specifies the directories where to look for existing sockets if a specific one was not set using socket-dir. You may specify each directory using a new --socket-dirs command line argument, or joined together by the path separator (: on Posix). The paths will be expanded. (ie: --socket-dirs=~/.xpra:/tmp)

Options for start, upgrade, proxy and shadow

--daemon=yes|no

By default, the xpra server puts itself into the background, i.e. 'daemonizes', and redirects its output to a log file. This prevents that behavior (useful mostly for debugging).

--bind=BIND_LOCATION

Create a local Unix domain socket for each bind option specified.
This option can be specified multiple times to specify multiple socket locations. These sockets support local connections with the :7-style display address, and remote connections with the ssh:frodo:7-style display address.
The location can take the form:

none

do not create a socket

auto

backwards compatible default which uses the current socket-dir

DIRECTORY/

create a socket in the directory specified, if the directory does not exist then it will be created - you should include the trailing slash to prevent the confusion with the PATH form:

PATH

create the socket using the path specified

--bind-tcp=[HOST]:PORT

Create a TCP socket for each --bind--tcp option specified. If the host portion is omitted, then 127.0.0.1 (localhost) will be used. If you wish to accept connections on all interfaces, pass 0.0.0.0 for the host portion.
Using this switch without using the auth option is not recommended, and is a major security risk (especially when passing 0.0.0.0)! Anyone at all may connect to this port and access your session. Use it only if you have special needs, and understand the consequences of your actions.

--bind-vsock=CID:PORT

Create a VSOCK socket for each --bind-vsock option specified.

--auth=MODULE[:OPTION=VALUE]

Specifies the authentication module to use for unix domain sockets created using the bind switch. Authentication modules can validate a username and password against a variety of backend modules:

allow

always allows authentication - this is dangerous and should only be used for testing

fail

always fails authentication, useful for testing

env

matches against the environment variable specified by the name option (which defaults to XPRA_PASSWORD). ie: --auth=env:name=SOME_OTHER_ENV_VAR_NAME.

password

matches against the password specified using the value option. ie: --auth=password:value=YOURPASSWORD. Note: this command line option may be exposed to other processes on the same system.

file

checks the password against the password data found in the file specified using the filename option. ie: --auth=file:filename=./password.txt.
The contents of this file will be treated as binary data, there are no restrictions on character encodings or file size, but since older versions did have more restrictions it is best to avoid special characters, in particular: non-ASCII characters, control characters like newlines and carriage returns, and the pipe character |.

multifile

checks the username and password against the file specified using the filename option. The file must contain each user credentials on one line of the form:
username|password|uid|gid|displays|env_opts|session_opts
It is not possible to have usernames or password that contain the pipe character | which is used as delimiter, or newlines and carriage returns.

pam

validates the username and password using the PAM system

win32

validates the username and password using Microsoft Windows authentication (only available on this platform)

sys

chooses the appropriate system authentication module automatically (either pam or win32)

--tcp-auth=MODULE

Just like the auth switch, except this one only applies to TCP sockets (sockets defined using the bind-tcp switch).

--vsock-auth=MODULE

Just like the auth switch, except this one only applies to VSOCK sockets (sockets defined using the bind-vsock switch).

--mdns=yes|no

Enable or disable the publication of new sessions via mDNS.

--dbus-proxy=yes|no

Allows the client to forward dbus calls to the server.

--dbus-control=yes|no

Start a dbus server which can be used to interact with the server process.

Options for start, upgrade

--start=CMD

After starting the server, runs the command CMD using the default shell. The command is run with its $DISPLAY set to point to the newly-started server. This option may be given multiple times to start multiple commands.

--start-child=CMD

Identical to --start, except that the commands are taken into account by --exit-with-children.

--start-after-connect=yes|no

Wait for the first client to connect before starting the --start and --start-child commands.

--exit-with-children

This option may only be used if --start-child is also given. If it is given, then the xpra server will monitor the status of the children started by --start-child, and will automatically terminate itself when the last of them has exited.

--env=KEY=VALUE

Extra environment variables which will only affect commands started using fB--start or fB--start-child.

--use-display

Use an existing display rather than starting one with xvfb. You are responsible for starting the display yourself. This can also be used to rescue an existing display whose xpra server instance crashed or for running xpra against an accelerated X11 server.

--xvfb=CMD

When starting a seamless server, xpra starts a virtual X server to run the clients on. If your Xvfb is installed in a funny location, or you want to use some other virtual X server, then this switch allows you to specify how to run your preferred X server executable. The default value used depends on your platform. For more information, see: xpra.org/Xdummy.html

--sync-xvfb=DELAY

The windows are normally only displayed on the client(s), they are not painted on the virtual display. Some applications like screen recorders may want to capture the window contents, you can use this option to enable painting with a configurable delay (in milliseconds). Warning: this extra painting is expensive and quite slow, which is why it is not enabled by default.

Options for start, upgrade, shadow

--tcp-proxy=HOST:PORT

Specifies the address to which non-xpra packets will be forwarded. This can be used to share the same TCP port with another TCP servers, usually a web server. xpra clients will connect as usual, but any client that does not speak the xpra protocol will be forwarded to the alternative server.

--html=on|off|[HOST]:PORT

Takes care of setting up a web server for the html5 client. This automatically configures a tcp-proxy pointing to the web server it starts. If the port is not specified, one is chosen automatically. You may want to specify a port number or at least ensure that firewall restrictions are in place, though web servers are usually public. This requires websockify to be installed and a single tcp port to be configured using bind-tcp.

--video-encoders=ENCODERS

Specifies the video encoders to try to load. By default, all of them are loaded, but one may want to specify a more restrictive list of encoders. Use the special value 'help' to get a list of options. Use the value 'none' to not load any video encoders.

--csc-modules=MODULES

Specifies the colourspace conversion modules to try to load. By default, all of them are loaded, but one may want to specify a more restrictive list of modules. Use the special value 'help' to get a list of options. Use the value 'none' to not load any colourspace conversion modules.
--mmap-group Sets the mmap file's gid to match the socket file's gid and sets the mmap file's permissions to 660. This is necessary to share the mmap file across user accounts.

--socket-permissions=ACCESS-MODE Specifies the permissions on the server socket. Defaults to 600. This is ignored when mmap-group is enabled.

Options for start, upgrade and attach

--encryption=CIPHER

Specifies the cipher to use for securing the connection from prying eyes. This option requires the use of the --encryption-keyfile option. The only cipher supported at present is AES, if the client requests encryption it will be used by both the client and server for all communication after the initial password verification, but only if the server supports this feature too. Note: this feature has not been extensively reviewed and as it is it should not be considered safe from determined attackers.

--tcp-encryption=CIPHER

Just like the encryption switch, except this one only applies to TCP sockets (sockets defined using the bind-tcp switch).

--encryption-keyfile=FILENAME

Specifies the key to use with the encryption cipher specified with --encryption. The client and server must use the same keyfile contents.

--tcp-encryption-keyfile=FILENAME

Just like the encryption-keyfile switch, except this one only applies to TCP sockets (sockets defined using the bind-tcp switch).

--idle-timeout=IDLETIMEOUT

The connection will be terminated if there is no user activity (mouse clicks or key presses) for the given amount of time (in seconds). Use the value 0 to disable this timeout.

--server-idle-timeout=IDLETIMEOUT

The server will exit if there are no active connections for the given amount of time (in seconds). Use the value 0 to disable this timeout.

--clipboard-filter-file=FILENAME

Name of a file containing regular expressions, any clipboard data that matches one of these regular expressions will be dropped. Note: at present this only applies to copying from the machine where this option is used, not to it.

--dpi=VALUE

The 'dots per inch' value that client applications should try to honour. This numeric value should be in the range 10 to 500 to be useful. Many applications will only read this value when starting up, so connecting to an existing session started with a different DPI value may not have the desired effect.

--cursors=yes|no

Enable or disable forwarding of custom application mouse cursors. Client applications may change the mouse cursor at any time, which will cause the new cursor's pixels to be sent to the client each time. This disables the feature.

--notifications=yes|no

Enable or disable forwarding of system notifications. System notifications require the xpra server to have its own instance of a dbus daemon, if it is missing a warning will be printed on startup. This switch disables the feature entirely, and avoids the warning.

--input-method=METHOD

Specify which input method to configure. This sets a number of environment variables which should be honoured by applications started with the start-child option.

The following METHODs are currently supported:

none

Disable input methods completely and prevent it from interfering with keyboard input. This is the default.

keep

Keeps the environment unchanged. You are responsible for ensuring it is correct.

xim

Enables the X Input Method.

IBus

Enables the Intelligent Input Bus.

SCIM

Enables the Smart Common Input Method.

uim

Enables the Universal Input Method.

Any other value will also be set up, but will trigger a warning.

--xsettings=yes|no

Enable or disable xsettings synchronization. Xsettings are only forwarded from posix clients connecting to real posix servers (not shadows).

--system-tray=yes|no

Enable or disable forwarding of system tray icons. This feature requires client support and may not be available on all platforms.

--bell=yes|no

Enable or disable forwarding of the system bell.

--webcam=yes|no

Enable or disable webcam forwarding. --remote-logging=yes|no|both Allow the client to forward its log output to the server. The client can specify the value both to both send it to the server and keep it locally.

Options for attach

--password-file=FILENAME

Supply the password to be used for connecting to a server that uses authentication. See auth, tcp-auth and vsock-auth for details. Alternatively, you may use the =XPRA_PASSWORD environment variable.

--opengl=yes|no|auto

Use OpenGL accelerated rendering on the client. The default is to detect if the graphics card and drivers are supported (auto mode), but one can also disable OpenGL (no) or force it enabled (yes).

--webcam=yes|no|/dev/deviceXXX|DEVICEID

Enable or disable webcam forwarding. The webcam device to use can also be specified.

-zLEVEL, --compress=LEVEL Select the level of compression xpra will use when transmitting data over the network. With the lz4 and lzo compressors, there are only two possible values: 0 (meaning no compression) and 1 (compression enabled). The zlib compressor supports values between 0 (meaning no compression) and 9, inclusive. It should only be used when lz4 and lzo are not available.
This compression is not used on pixel data (except when using the rgb encoding).

--quality=VALUE

This option sets a fixed image compression quality for lossy encodings (jpeg, webp, h264/h265 and vp8/vp9). First, one of those lossy encodings must be enabled with --encoding. Values range from 1 (lowest quality, high compression - generally unusable) to 100 (highest quality, low compression). Specify a value of zero to let the system tune the quality dynamically to achieve the best bandwidth usage possible. It is usually best not to use this option and use min-quality instead.

--min-quality=MIN-QUALITY

This option sets the minimum encoding quality allowed when the quality option is set to automatic mode.

--speed=SPEED

This option sets the encoding speed. Slower compresses more, faster will give better latency. The system normally uses a variable speed, this option forces a fixed speed setting to be used instead. It is usually best not to use this option and use min-speed instead.

--min-speed=MIN-SPEED

This option sets the minimum encoding speed allowed when the speed option is set to automatic mode.

--auto-refresh-delay=DELAY

This option sets a delay after which the windows are automatically refreshed using a lossless frame. The delay is a floating-point number and is in seconds. This option is enabled by default with a delay of 0.25 seconds. This option is only relevant when using a lossy encoding.

--key-shortcut=KEY:ACTION

Can be specified multiple times to add multiple key shortcuts. These keys will be caught by the client and trigger the action specified and the key presses will not be passed to the server.
The KEY specification may include keyboard modifiers in the form [modifier+]*key, for example: Shift+F10 or Shift+Control+B
If no shortcuts are defined on the command line, the following default one will be used: Meta+Shift+F4:quit
Some of the actions may allow arguments (ie: the log action does), in which case they are specified in the usual programming style syntax: ACTION(ARG1, ARG2, etc)
String arguments must be quoted (both single and double quotes are supported) and numeric arguments must not be quoted. Beware the the parenthesis and quotes must usually be escaped when used from a shell command line. Example: --key-shortcut=Meta+Shift+F7:log\(\'hello\'\)

The following ACTIONs are currently defined:

quit

Disconnect the xpra client.

log(MESSAGE)

Sends MESSAGE to the log.

show_session_info[(TabName)]

Shows the session information window. The optional TabName allows the information tab shown to be selected. Use the value help to get the list of options.

show_menu

Shows the menu normally found in the system tray.

show_start_new_command

Shows the start new command dialog.

magic_key

Placeholder which can be used by some client toolkits.

void

Does not do anything, and can therefore be used to prevent certain key combinations from ever being sent to the server.

refresh_window

Force the currently focused window to be refreshed.

refresh_all_windows

Force all windows to be refreshed.

--readonly=yes|no

Read only mode prevents all keyboard and mouse activity from being sent to the server.

--sharing=yes|no

Sharing allows more than one client to connect to the same session. This must be enabled on both the server and all co-operating clients to function.

--keyboard-sync=yes|no

Normally the key presses and key release events are sent to the server as they occur so that the server can maintain a consistent keyboard state. Disabling synchronization can prevent keys from repeating unexpectedly on high latency links but it may also disrupt applications which access the keyboard directly (games, etc.).

--sound-source=PLUGIN

Specifies the GStreamer sound plugin used for capturing the sound stream. This affects "speaker forwarding" on the server, and "microphone" forwarding on the client. To get a list of options use the special value 'help'. It is also possible to specify plugin options using the form: --sound-source=pulse:device=device.alsa_input.pci-0000_00_14.2.analog-stereo

--speaker=on|off|disabled and --microphone=on|off|disabled|on:DEVICE|off:DEVICE

Sound input and output forwarding support: on will start the forwarding as soon as the connection is established, off will require the user to enable it via the menu, disabled will prevent it from being used and the menu entry will be disabled. With microphone forwarding, you may also be able to specify which device to use.

--speaker-codec=CODEC and --microphone-codec=CODEC

Specify the codec(s) to use for sound output (speaker) or input (microphone). This parameter can be specified multiple times and the order in which the codecs are specified defines the preferred codec order. Use the special value 'help' to get a list of options. When unspecified, all the available codecs are allowed and the first one is used.

--title=VALUE

Sets the text shown as window title. The string supplied can make use of remote metadata placeholders which will be populated at runtime with the values from the remote server. The default value used is "@title@ on @client-machine@".
The following placeholders are defined:

@title@

Will be replaced by the remote window's title.

@client-machine@

Will be replaced by the remote server's hostname.

--client-toolkit=TOOLKIT

Specifies the client toolkit to use. This changes the user interface toolkit used to draw the windows and may affect the availability of other features. The 'gtk2' toolkit is the one with the most features. Use the special value 'help' to get a list of options.

--border=BORDER

Specifies the color and size of the border to draw inside every xpra window. This can be used to easily distinguish xpra windows running on remote hosts from local windows. The BORDER can be specified using standard color names (ie: red, or orange) or using the web hexadecimal syntax (ie: #F00 or #FF8C00). The special color name "auto" will derive the color from the server target address (the connection string) so that connecting to the same target should always give the same color. You may also specify the size of the border in pixels, ie: --border=yellow,10.

--window-icon=FILENAME

Path to the default image which will be used for all windows. This icon may be shown in the window's bar, its iconified state or task switchers. This depends on the operating system, the window manage and the application may override this too.

--window-close=ACTION

Choose what action to take when the window is closed by the client. The following actions can be used:

forward

The event will be forwarded to the server.

ignore

Do nothing.

disconnect

Disconnect from the server.

shutdown

Shutdown the server.

--desktop-scaling=off|on|auto|VALUE

Desktop scaling allows the windows to be scaled by the client. Downscaling will mostly waste bandwidth (though it can be useful when used with the shadow-fullscreen option). Upscaling allows the window's pixels to be sent over the wire at a lower resolution, saving bandwidth and CPU time. This option can also be used to request a specific scaling value. For best results, use opengl client rendering, the other display backends may show visual artifacts when scaling. Note: the scaling may also be adjusted at runtime through keyboard shortcuts if those are configured.
The desktop-scaling value can take the form:

off

scaling will be disabled

on

scaling will be allowed, but it will start unscaled

auto

scaling will be allowed and a scaling value will be automatically chosen if the client's desktop is large (bigger desktops will use higher scaling values)

scaling-value

scaling will be enabled and use the given value, specified as a number, fraction or percentage. ie: 2, 3/2 or 150%.

pair

the scaling will be enabled and use a different value for the X and Y axis. ie: 3x2 or 3/2x4/3

desktop-size

the scaling will be enabled and the server will render to the given size. ie: 1600x1200

--shadow-fullscreen=no|yes When connecting to shadow server, the remote display can be shown fullscreen using this option.
--tray=yes|no Enable or disable the system tray. Not available on OSX since the dock icon is always shown.

--delay-tray

Waits for the first window or notification to appear before showing the system tray. (posix only)

--tray-icon=FILENAME

Specifies the icon shown in the dock/tray. By default it uses a simple default 'xpra' icon. (On Microsoft Windows, the icon must be in ico format.)

--enable-pings

The client and server will exchange ping and echo packets which are used to gather latency statistics. Those statistics can be seen using the xpra info command.

Options for attach, stop, info, screenshot, version

--ssh=CMD

When you use an ssh: address to connect to a remote display, xpra runs ssh(1) to make the underlying connection. By default, it does this by running the command "ssh". If your ssh program is in an unusual location, has an unusual name, or you want to pass special options to change ssh's behavior, then you can use the --ssh switch to tell xpra how to run ssh.
For example, if you want to use arcfour encryption, then you should run

xpra attach --ssh="ssh -c arcfour" ssh:frodo:7

Note: Don't bother to enable ssh compression; this is redundant with xpra's own compression, and will just waste your CPU. See also xpra's --compress switch.
On MS Windows, where backslashes are used to separate path elements and where spaces are often used as part of paths, you need to add quotes around paths. (ie: ssh="C:\Program Files\Xpra\Plink.exe" -ssh -agent)

--exit-ssh=yes|no

Choose whether the SSH client process should be forcibly terminated when xpra disconnects from the server. If you are using SSH connection sharing, you may want to avoid stopping the SSH master process instance spawned by xpra as it may be used by other SSH sessions. Note: the exit-ssh=no detaches the SSH process from the terminal which prevents the SSH process from interacting with the terminal input, this disables the keyboard interaction required for password input, host key verification, etc..

--remote-xpra=CMD

When connecting to a remote server over ssh, xpra needs to be able to find and run the xpra executable on the remote host. If this executable is in a non-standard location, or requires special environment variables to be set before it can run, then accomplishing this may be non-trivial. If running xpra attach ssh:something fails because it cannot find the remote xpra, then you can use this option to specify how to run xpra on the remote host.
That said, this option should not be needed in normal usage, as xpra tries quite hard to work around the above problems. If you find yourself needing it often, then that may indicate a bug that we would appreciate hearing about.

ENVIRONMENT

DISPLAY

xpra start --start-child=... sets this variable in the environment of the child to point to the xpra display.
xpra attach, on the other hand, uses this variable to determine which display the remote applications should be shown on.
fIXPRA_PASSWORD may be used with xpra attach instead of the password-file option.

FILES

~/.xpra/:7

The unix domain socket that clients use to contact the xpra server, if the system configuration uses this directory.

~/.xpra/:7.log

When run in daemon mode (the default), the xpra server directs all output to this file. This includes all debugging output, if debugging is enabled.

~/.xpra/run-xpra

A shell script that, when run, starts up xpra with the correct python interpreter, PYTHONPATH, PATH, location of the main xpra script, etc. Automatically generated by xpra initenv, xpra start and used by xpra attach (see also the discussion of --remote-xpra).

BUGS

REPORTING BUGS

SEE ALSO