x86_64-linux-gnu-g++-7 (1)
Leading comments
Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35) Standard preamble: ========================================================================
NAME
gcc - GNU project C and C++ compilerSYNOPSIS
gcc [-c|-S|-E] [-std=standard][-g] [-pg] [-Olevel]
[-Wwarn...] [-Wpedantic]
[-Idir...] [-Ldir...]
[-Dmacro[=defn]...] [-Umacro]
[-foption...] [-mmachine-option...]
[-o outfile] [@file] infile...
Only the most useful options are listed here; see below for the remainder. g++ accepts mostly the same options as gcc.
DESCRIPTION
When you invokeOther options are passed on to one or more stages of processing. Some options control the preprocessor and others the compiler itself. Yet other options control the assembler and linker; most of these are not documented here, since you rarely need to use any of them.
Most of the command-line options that you can use with
The usual way to run
The gcc program accepts options and file names as operands. Many options have multi-letter names; therefore multiple single-letter options may not be grouped: -dv is very different from -d -v.
You can mix options and other arguments. For the most part, the order you use doesn't matter. Order does matter when you use several options of the same kind; for example, if you specify -L more than once, the directories are searched in the order specified. Also, the placement of the -l option is significant.
Many options have long names starting with -f or with -W---for example, -fmove-loop-invariants, -Wformat and so on. Most of these have both positive and negative forms; the negative form of -ffoo is -fno-foo. This manual documents only one of these two forms, whichever one is not the default.
OPTIONS
Option Summary
Here is a summary of all the options, grouped by type. Explanations are in the following sections.- Overall Options
- -c -S -E -o file -x language -v -### --help[=class[,...]] --target-help --version -pass-exit-codes -pipe -specs=file -wrapper @file -fplugin=file -fplugin-arg-name=arg -fdump-ada-spec[-slim] -fada-spec-parent=unit -fdump-go-spec=file
- C Language Options
- -ansi -std=standard -fgnu89-inline -fpermitted-flt-eval-methods=standard -aux-info filename -fallow-parameterless-variadic-functions -fno-asm -fno-builtin -fno-builtin-function -fgimple -fhosted -ffreestanding -fopenacc -fopenmp -fopenmp-simd -fms-extensions -fplan9-extensions -fsso-struct=endianness -fallow-single-precision -fcond-mismatch -flax-vector-conversions -fsigned-bitfields -fsigned-char -funsigned-bitfields -funsigned-char
- C++Language Options
- -fabi-version=n -fno-access-control -faligned-new=n -fargs-in-order=n -fcheck-new -fconstexpr-depth=n -fconstexpr-loop-limit=n -ffriend-injection -fno-elide-constructors -fno-enforce-eh-specs -ffor-scope -fno-for-scope -fno-gnu-keywords -fno-implicit-templates -fno-implicit-inline-templates -fno-implement-inlines -fms-extensions -fnew-inheriting-ctors -fnew-ttp-matching -fno-nonansi-builtins -fnothrow-opt -fno-operator-names -fno-optional-diags -fpermissive -fno-pretty-templates -frepo -fno-rtti -fsized-deallocation -ftemplate-backtrace-limit=n -ftemplate-depth=n -fno-threadsafe-statics -fuse-cxa-atexit -fno-weak -nostdinc++ -fvisibility-inlines-hidden -fvisibility-ms-compat -fext-numeric-literals -Wabi=n -Wabi-tag -Wconversion-null -Wctor-dtor-privacy -Wdelete-non-virtual-dtor -Wliteral-suffix -Wmultiple-inheritance -Wnamespaces -Wnarrowing -Wnoexcept -Wnoexcept-type -Wnon-virtual-dtor -Wreorder -Wregister -Weffc++ -Wstrict-null-sentinel -Wtemplates -Wno-non-template-friend -Wold-style-cast -Woverloaded-virtual -Wno-pmf-conversions -Wsign-promo -Wvirtual-inheritance
- Objective-C and Objective-C++Language Options
- -fconstant-string-class=class-name -fgnu-runtime -fnext-runtime -fno-nil-receivers -fobjc-abi-version=n -fobjc-call-cxx-cdtors -fobjc-direct-dispatch -fobjc-exceptions -fobjc-gc -fobjc-nilcheck -fobjc-std=objc1 -fno-local-ivars -fivar-visibility=[public|protected|private|package] -freplace-objc-classes -fzero-link -gen-decls -Wassign-intercept -Wno-protocol -Wselector -Wstrict-selector-match -Wundeclared-selector
- Diagnostic Message Formatting Options
- -fmessage-length=n -fdiagnostics-show-location=[once|every-line] -fdiagnostics-color=[auto|never|always] -fno-diagnostics-show-option -fno-diagnostics-show-caret -fdiagnostics-parseable-fixits -fdiagnostics-generate-patch -fno-show-column
- Warning Options
- -fsyntax-only -fmax-errors=n -Wpedantic -pedantic-errors -w -Wextra -Wall -Waddress -Waggregate-return -Walloc-zero -Walloc-size-larger-than=n -Walloca -Walloca-larger-than=n -Wno-aggressive-loop-optimizations -Warray-bounds -Warray-bounds=n -Wno-attributes -Wbool-compare -Wbool-operation -Wno-builtin-declaration-mismatch -Wno-builtin-macro-redefined -Wc90-c99-compat -Wc99-c11-compat -Wc++-compat -Wc++11-compat -Wc++14-compat -Wcast-align -Wcast-qual -Wchar-subscripts -Wchkp -Wclobbered -Wcomment -Wconditionally-supported -Wconversion -Wcoverage-mismatch -Wno-cpp -Wdangling-else -Wdate-time -Wdelete-incomplete -Wno-deprecated -Wno-deprecated-declarations -Wno-designated-init -Wdisabled-optimization -Wno-discarded-qualifiers -Wno-discarded-array-qualifiers -Wno-div-by-zero -Wdouble-promotion -Wduplicated-branches -Wduplicated-cond -Wempty-body -Wenum-compare -Wno-endif-labels -Wexpansion-to-defined -Werror -Werror=* -Wfatal-errors -Wfloat-equal -Wformat -Wformat=2 -Wno-format-contains-nul -Wno-format-extra-args -Wformat-nonliteral -Wformat-overflow=n -Wformat-security -Wformat-signedness -Wformat-truncation=n -Wformat-y2k -Wframe-address -Wframe-larger-than=len -Wno-free-nonheap-object -Wjump-misses-init -Wignored-qualifiers -Wignored-attributes -Wincompatible-pointer-types -Wimplicit -Wimplicit-fallthrough -Wimplicit-fallthrough=n -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wno-int-conversion -Wint-in-bool-context -Wno-int-to-pointer-cast -Winvalid-memory-model -Wno-invalid-offsetof -Winvalid-pch -Wlarger-than=len -Wlogical-op -Wlogical-not-parentheses -Wlong-long -Wmain -Wmaybe-uninitialized -Wmemset-elt-size -Wmemset-transposed-args -Wmisleading-indentation -Wmissing-braces -Wmissing-field-initializers -Wmissing-include-dirs -Wno-multichar -Wnonnull -Wnonnull-compare -Wnormalized=[none|id|nfc|nfkc] -Wnull-dereference -Wodr -Wno-overflow -Wopenmp-simd -Woverride-init-side-effects -Woverlength-strings -Wpacked -Wpacked-bitfield-compat -Wpadded -Wparentheses -Wno-pedantic-ms-format -Wplacement-new -Wplacement-new=n -Wpointer-arith -Wpointer-compare -Wno-pointer-to-int-cast -Wno-pragmas -Wredundant-decls -Wrestrict -Wno-return-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wno-shadow-ivar -Wshadow=global, -Wshadow=local, -Wshadow=compatible-local -Wshift-overflow -Wshift-overflow=n -Wshift-count-negative -Wshift-count-overflow -Wshift-negative-value -Wsign-compare -Wsign-conversion -Wfloat-conversion -Wno-scalar-storage-order -Wsizeof-pointer-memaccess -Wsizeof-array-argument -Wstack-protector -Wstack-usage=len -Wstrict-aliasing -Wstrict-aliasing=n -Wstrict-overflow -Wstrict-overflow=n -Wstringop-overflow=n -Wsuggest-attribute=[pure|const|noreturn|format] -Wsuggest-final-types -Wsuggest-final-methods -Wsuggest-override -Wmissing-format-attribute -Wsubobject-linkage -Wswitch -Wswitch-bool -Wswitch-default -Wswitch-enum -Wswitch-unreachable -Wsync-nand -Wsystem-headers -Wtautological-compare -Wtrampolines -Wtrigraphs -Wtype-limits -Wundef -Wuninitialized -Wunknown-pragmas -Wunsafe-loop-optimizations -Wunsuffixed-float-constants -Wunused -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-macros -Wunused-parameter -Wno-unused-result -Wunused-value -Wunused-variable -Wunused-const-variable -Wunused-const-variable=n -Wunused-but-set-parameter -Wunused-but-set-variable -Wuseless-cast -Wvariadic-macros -Wvector-operation-performance -Wvla -Wvla-larger-than=n -Wvolatile-register-var -Wwrite-strings -Wzero-as-null-pointer-constant -Whsa
- C and Objective-C-only Warning Options
- -Wbad-function-cast -Wmissing-declarations -Wmissing-parameter-type -Wmissing-prototypes -Wnested-externs -Wold-style-declaration -Wold-style-definition -Wstrict-prototypes -Wtraditional -Wtraditional-conversion -Wdeclaration-after-statement -Wpointer-sign
- Debugging Options
- -g -glevel -gcoff -gdwarf -gdwarf-version -ggdb -grecord-gcc-switches -gno-record-gcc-switches -gstabs -gstabs+ -gstrict-dwarf -gno-strict-dwarf -gcolumn-info -gno-column-info -gvms -gxcoff -gxcoff+ -gz[=type] -fdebug-prefix-map=old=new -fdebug-types-section -feliminate-dwarf2-dups -fno-eliminate-unused-debug-types -femit-struct-debug-baseonly -femit-struct-debug-reduced -femit-struct-debug-detailed[=spec-list] -feliminate-unused-debug-symbols -femit-class-debug-always -fno-merge-debug-strings -fno-dwarf2-cfi-asm -fvar-tracking -fvar-tracking-assignments
- Optimization Options
- -faggressive-loop-optimizations -falign-functions[=n] -falign-jumps[=n] -falign-labels[=n] -falign-loops[=n] -fassociative-math -fauto-profile -fauto-profile[=path] -fauto-inc-dec -fbranch-probabilities -fbranch-target-load-optimize -fbranch-target-load-optimize2 -fbtr-bb-exclusive -fcaller-saves -fcombine-stack-adjustments -fconserve-stack -fcompare-elim -fcprop-registers -fcrossjumping -fcse-follow-jumps -fcse-skip-blocks -fcx-fortran-rules -fcx-limited-range -fdata-sections -fdce -fdelayed-branch -fdelete-null-pointer-checks -fdevirtualize -fdevirtualize-speculatively -fdevirtualize-at-ltrans -fdse -fearly-inlining -fipa-sra -fexpensive-optimizations -ffat-lto-objects -ffast-math -ffinite-math-only -ffloat-store -fexcess-precision=style -fforward-propagate -ffp-contract=style -ffunction-sections -fgcse -fgcse-after-reload -fgcse-las -fgcse-lm -fgraphite-identity -fgcse-sm -fhoist-adjacent-loads -fif-conversion -fif-conversion2 -findirect-inlining -finline-functions -finline-functions-called-once -finline-limit=n -finline-small-functions -fipa-cp -fipa-cp-clone -fipa-bit-cp -fipa-vrp -fipa-pta -fipa-profile -fipa-pure-const -fipa-reference -fipa-icf -fira-algorithm=algorithm -fira-region=region -fira-hoist-pressure -fira-loop-pressure -fno-ira-share-save-slots -fno-ira-share-spill-slots -fisolate-erroneous-paths-dereference -fisolate-erroneous-paths-attribute -fivopts -fkeep-inline-functions -fkeep-static-functions -fkeep-static-consts -flimit-function-alignment -flive-range-shrinkage -floop-block -floop-interchange -floop-strip-mine -floop-unroll-and-jam -floop-nest-optimize -floop-parallelize-all -flra-remat -flto -flto-compression-level -flto-partition=alg -fmerge-all-constants -fmerge-constants -fmodulo-sched -fmodulo-sched-allow-regmoves -fmove-loop-invariants -fno-branch-count-reg -fno-defer-pop -fno-fp-int-builtin-inexact -fno-function-cse -fno-guess-branch-probability -fno-inline -fno-math-errno -fno-peephole -fno-peephole2 -fno-printf-return-value -fno-sched-interblock -fno-sched-spec -fno-signed-zeros -fno-toplevel-reorder -fno-trapping-math -fno-zero-initialized-in-bss -fomit-frame-pointer -foptimize-sibling-calls -fpartial-inlining -fpeel-loops -fpredictive-commoning -fprefetch-loop-arrays -fprofile-correction -fprofile-use -fprofile-use=path -fprofile-values -fprofile-reorder-functions -freciprocal-math -free -frename-registers -freorder-blocks -freorder-blocks-algorithm=algorithm -freorder-blocks-and-partition -freorder-functions -frerun-cse-after-loop -freschedule-modulo-scheduled-loops -frounding-math -fsched2-use-superblocks -fsched-pressure -fsched-spec-load -fsched-spec-load-dangerous -fsched-stalled-insns-dep[=n] -fsched-stalled-insns[=n] -fsched-group-heuristic -fsched-critical-path-heuristic -fsched-spec-insn-heuristic -fsched-rank-heuristic -fsched-last-insn-heuristic -fsched-dep-count-heuristic -fschedule-fusion -fschedule-insns -fschedule-insns2 -fsection-anchors -fselective-scheduling -fselective-scheduling2 -fsel-sched-pipelining -fsel-sched-pipelining-outer-loops -fsemantic-interposition -fshrink-wrap -fshrink-wrap-separate -fsignaling-nans -fsingle-precision-constant -fsplit-ivs-in-unroller -fsplit-loops -fsplit-paths -fsplit-wide-types -fssa-backprop -fssa-phiopt -fstdarg-opt -fstore-merging -fstrict-aliasing -fstrict-overflow -fthread-jumps -ftracer -ftree-bit-ccp -ftree-builtin-call-dce -ftree-ccp -ftree-ch -ftree-coalesce-vars -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop -ftree-fre -fcode-hoisting -ftree-loop-if-convert -ftree-loop-im -ftree-phiprop -ftree-loop-distribution -ftree-loop-distribute-patterns -ftree-loop-ivcanon -ftree-loop-linear -ftree-loop-optimize -ftree-loop-vectorize -ftree-parallelize-loops=n -ftree-pre -ftree-partial-pre -ftree-pta -ftree-reassoc -ftree-sink -ftree-slsr -ftree-sra -ftree-switch-conversion -ftree-tail-merge -ftree-ter -ftree-vectorize -ftree-vrp -funconstrained-commons -funit-at-a-time -funroll-all-loops -funroll-loops -funsafe-math-optimizations -funswitch-loops -fipa-ra -fvariable-expansion-in-unroller -fvect-cost-model -fvpt -fweb -fwhole-program -fwpa -fuse-linker-plugin --param name=value -O -O0 -O1 -O2 -O3 -Os -Ofast -Og
- Program Instrumentation Options
- -p -pg -fprofile-arcs --coverage -ftest-coverage -fprofile-dir=path -fprofile-generate -fprofile-generate=path -fsanitize=style -fsanitize-recover -fsanitize-recover=style -fasan-shadow-offset=number -fsanitize-sections=s1,s2,... -fsanitize-undefined-trap-on-error -fbounds-check -fcheck-pointer-bounds -fchkp-check-incomplete-type -fchkp-first-field-has-own-bounds -fchkp-narrow-bounds -fchkp-narrow-to-innermost-array -fchkp-optimize -fchkp-use-fast-string-functions -fchkp-use-nochk-string-functions -fchkp-use-static-bounds -fchkp-use-static-const-bounds -fchkp-treat-zero-dynamic-size-as-infinite -fchkp-check-read -fchkp-check-read -fchkp-check-write -fchkp-store-bounds -fchkp-instrument-calls -fchkp-instrument-marked-only -fchkp-use-wrappers -fchkp-flexible-struct-trailing-arrays -fstack-protector -fstack-protector-all -fstack-protector-strong -fstack-protector-explicit -fstack-check -fstack-limit-register=reg -fstack-limit-symbol=sym -fno-stack-limit -fsplit-stack -fvtable-verify=[std|preinit|none] -fvtv-counts -fvtv-debug -finstrument-functions -finstrument-functions-exclude-function-list=sym,sym,... -finstrument-functions-exclude-file-list=file,file,...
- Preprocessor Options
- -Aquestion=answer -A-question[=answer] -C -CC -Dmacro[=defn] -dD -dI -dM -dN -dU -fdebug-cpp -fdirectives-only -fdollars-in-identifiers -fexec-charset=charset -fextended-identifiers -finput-charset=charset -fno-canonical-system-headers -fpch-deps -fpch-preprocess -fpreprocessed -ftabstop=width -ftrack-macro-expansion -fwide-exec-charset=charset -fworking-directory -H -imacros file -include file -M -MD -MF -MG -MM -MMD -MP -MQ -MT -no-integrated-cpp -P -pthread -remap -traditional -traditional-cpp -trigraphs -Umacro -undef -Wp,option -Xpreprocessor option
- Assembler Options
- -Wa,option -Xassembler option
- Linker Options
- object-file-name -fuse-ld=linker -llibrary -nostartfiles -nodefaultlibs -nostdlib -pie -pthread -rdynamic -s -static -static-libgcc -static-libstdc++ -static-libasan -static-libtsan -static-liblsan -static-libubsan -static-libmpx -static-libmpxwrappers -shared -shared-libgcc -symbolic -T script -Wl,option -Xlinker option -u symbol -z keyword
- Directory Options
- -Bprefix -Idir -I- -idirafter dir -imacros file -imultilib dir -iplugindir=dir -iprefix file -iquote dir -isysroot dir -isystem dir -iwithprefix dir -iwithprefixbefore dir -Ldir -no-canonical-prefixes --no-sysroot-suffix -nostdinc -nostdinc++ --sysroot=dir
- Code Generation Options
- -fcall-saved-reg -fcall-used-reg -ffixed-reg -fexceptions -fnon-call-exceptions -fdelete-dead-exceptions -funwind-tables -fasynchronous-unwind-tables -fno-gnu-unique -finhibit-size-directive -fno-common -fno-ident -fpcc-struct-return -fpic -fPIC -fpie -fPIE -fno-plt -fno-jump-tables -frecord-gcc-switches -freg-struct-return -fshort-enums -fshort-wchar -fverbose-asm -fpack-struct[=n] -fleading-underscore -ftls-model=model -fstack-reuse=reuse_level -ftrampolines -ftrapv -fwrapv -fvisibility=[default|internal|hidden|protected] -fstrict-volatile-bitfields -fsync-libcalls
- Developer Options
- -dletters -dumpspecs -dumpmachine -dumpversion -dumpfullversion -fchecking -fchecking=n -fdbg-cnt-list -fdbg-cnt=counter-value-list -fdisable-ipa-pass_name -fdisable-rtl-pass_name -fdisable-rtl-pass-name=range-list -fdisable-tree-pass_name -fdisable-tree-pass-name=range-list -fdump-noaddr -fdump-unnumbered -fdump-unnumbered-links -fdump-translation-unit[-n] -fdump-class-hierarchy[-n] -fdump-ipa-all -fdump-ipa-cgraph -fdump-ipa-inline -fdump-passes -fdump-rtl-pass -fdump-rtl-pass=filename -fdump-statistics -fdump-final-insns[=file] -fdump-tree-all -fdump-tree-switch -fdump-tree-switch-options -fdump-tree-switch-options=filename -fcompare-debug[=opts] -fcompare-debug-second -fenable-kind-pass -fenable-kind-pass=range-list -fira-verbose=n -flto-report -flto-report-wpa -fmem-report-wpa -fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fopt-info -fopt-info-options[=file] -fprofile-report -frandom-seed=string -fsched-verbose=n -fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose -fstats -fstack-usage -ftime-report -ftime-report-details -fvar-tracking-assignments-toggle -gtoggle -print-file-name=library -print-libgcc-file-name -print-multi-directory -print-multi-lib -print-multi-os-directory -print-prog-name=program -print-search-dirs -Q -print-sysroot -print-sysroot-headers-suffix -save-temps -save-temps=cwd -save-temps=obj -time[=file]
- Machine-Dependent Options
-
AArch64 Options
-mabi=name -mbig-endian -mlittle-endian
-mgeneral-regs-only
-mcmodel=tiny -mcmodel=small -mcmodel=large
-mstrict-align
-momit-leaf-frame-pointer -mno-omit-leaf-frame-pointer
-mtls-dialect=desc -mtls-dialect=traditional
-mtls-size=size
-mfix-cortex-a53-835769 -mno-fix-cortex-a53-835769
-mfix-cortex-a53-843419 -mno-fix-cortex-a53-843419
-mlow-precision-recip-sqrt -mno-low-precision-recip-sqrt
-mlow-precision-sqrt -mno-low-precision-sqrt
-mlow-precision-div -mno-low-precision-div
-march=name -mcpu=name -mtune=name
Adapteva Epiphany Options -mhalf-reg-file -mprefer-short-insn-regs -mbranch-cost=num -mcmove -mnops=num -msoft-cmpsf -msplit-lohi -mpost-inc -mpost-modify -mstack-offset=num -mround-nearest -mlong-calls -mshort-calls -msmall16 -mfp-mode=mode -mvect-double -max-vect-align=num -msplit-vecmove-early -m1reg-reg
ARCOptions -mbarrel-shifter -mcpu=cpu -mA6 -mARC600 -mA7 -mARC700 -mdpfp -mdpfp-compact -mdpfp-fast -mno-dpfp-lrsr -mea -mno-mpy -mmul32x16 -mmul64 -matomic -mnorm -mspfp -mspfp-compact -mspfp-fast -msimd -msoft-float -mswap -mcrc -mdsp-packa -mdvbf -mlock -mmac-d16 -mmac-24 -mrtsc -mswape -mtelephony -mxy -misize -mannotate-align -marclinux -marclinux_prof -mlong-calls -mmedium-calls -msdata -mvolatile-cache -mtp-regno=regno -malign-call -mauto-modify-reg -mbbit-peephole -mno-brcc -mcase-vector-pcrel -mcompact-casesi -mno-cond-exec -mearly-cbranchsi -mexpand-adddi -mindexed-loads -mlra -mlra-priority-none -mlra-priority-compact mlra-priority-noncompact -mno-millicode -mmixed-code -mq-class -mRcq -mRcw -msize-level=level -mtune=cpu -mmultcost=num -munalign-prob-threshold=probability -mmpy-option=multo -mdiv-rem -mcode-density -mll64 -mfpu=fpuARMOptions -mapcs-frame -mno-apcs-frame -mabi=name -mapcs-stack-check -mno-apcs-stack-check -mapcs-reentrant -mno-apcs-reentrant -msched-prolog -mno-sched-prolog -mlittle-endian -mbig-endian -mfloat-abi=name -mfp16-format=name -mthumb-interwork -mno-thumb-interwork -mcpu=name -march=name -mfpu=name -mtune=name -mprint-tune-info -mstructure-size-boundary=n -mabort-on-noreturn -mlong-calls -mno-long-calls -msingle-pic-base -mno-single-pic-base -mpic-register=reg -mnop-fun-dllimport -mpoke-function-name -mthumb -marm -mtpcs-frame -mtpcs-leaf-frame -mcaller-super-interworking -mcallee-super-interworking -mtp=name -mtls-dialect=dialect -mword-relocations -mfix-cortex-m3-ldrd -munaligned-access -mneon-for-64bits -mslow-flash-data -masm-syntax-unified -mrestrict-it -mpure-code -mcmseAVROptions -mmcu=mcu -mabsdata -maccumulate-args -mbranch-cost=cost -mcall-prologues -mint8 -mn_flash=size -mno-interrupts -mrelax -mrmw -mstrict-X -mtiny-stack -mfract-convert-truncate -nodevicelib -Waddr-space-convert -Wmisspelled-isrBlackfin Options -mcpu=cpu[-sirevision] -msim -momit-leaf-frame-pointer -mno-omit-leaf-frame-pointer -mspecld-anomaly -mno-specld-anomaly -mcsync-anomaly -mno-csync-anomaly -mlow-64k -mno-low64k -mstack-check-l1 -mid-shared-library -mno-id-shared-library -mshared-library-id=n -mleaf-id-shared-library -mno-leaf-id-shared-library -msep-data -mno-sep-data -mlong-calls -mno-long-calls -mfast-fp -minline-plt -mmulticore -mcorea -mcoreb -msdram -micplb
C6X Options -mbig-endian -mlittle-endian -march=cpu -msim -msdata=sdata-type
CRISOptions -mcpu=cpu -march=cpu -mtune=cpu -mmax-stack-frame=n -melinux-stacksize=n -metrax4 -metrax100 -mpdebug -mcc-init -mno-side-effects -mstack-align -mdata-align -mconst-align -m32-bit -m16-bit -m8-bit -mno-prologue-epilogue -mno-gotplt -melf -maout -melinux -mlinux -sim -sim2 -mmul-bug-workaround -mno-mul-bug-workaroundCR16Options -mmac -mcr16cplus -mcr16c -msim -mint32 -mbit-ops -mdata-model=modelDarwin Options -all_load -allowable_client -arch -arch_errors_fatal -arch_only -bind_at_load -bundle -bundle_loader -client_name -compatibility_version -current_version -dead_strip -dependency-file -dylib_file -dylinker_install_name -dynamic -dynamiclib -exported_symbols_list -filelist -flat_namespace -force_cpusubtype_ALL -force_flat_namespace -headerpad_max_install_names -iframework -image_base -init -install_name -keep_private_externs -multi_module -multiply_defined -multiply_defined_unused -noall_load -no_dead_strip_inits_and_terms -nofixprebinding -nomultidefs -noprebind -noseglinkedit -pagezero_size -prebind -prebind_all_twolevel_modules -private_bundle -read_only_relocs -sectalign -sectobjectsymbols -whyload -seg1addr -sectcreate -sectobjectsymbols -sectorder -segaddr -segs_read_only_addr -segs_read_write_addr -seg_addr_table -seg_addr_table_filename -seglinkedit -segprot -segs_read_only_addr -segs_read_write_addr -single_module -static -sub_library -sub_umbrella -twolevel_namespace -umbrella -undefined -unexported_symbols_list -weak_reference_mismatches -whatsloaded -F -gused -gfull -mmacosx-version-min=version -mkernel -mone-byte-bool
DECAlpha Options -mno-fp-regs -msoft-float -mieee -mieee-with-inexact -mieee-conformant -mfp-trap-mode=mode -mfp-rounding-mode=mode -mtrap-precision=mode -mbuild-constants -mcpu=cpu-type -mtune=cpu-type -mbwx -mmax -mfix -mcix -mfloat-vax -mfloat-ieee -mexplicit-relocs -msmall-data -mlarge-data -msmall-text -mlarge-text -mmemory-latency=timeFR30Options -msmall-model -mno-lsimFT32Options -msim -mlra -mnodivFRVOptions -mgpr-32 -mgpr-64 -mfpr-32 -mfpr-64 -mhard-float -msoft-float -malloc-cc -mfixed-cc -mdword -mno-dword -mdouble -mno-double -mmedia -mno-media -mmuladd -mno-muladd -mfdpic -minline-plt -mgprel-ro -multilib-library-pic -mlinked-fp -mlong-calls -malign-labels -mlibrary-pic -macc-4 -macc-8 -mpack -mno-pack -mno-eflags -mcond-move -mno-cond-move -moptimize-membar -mno-optimize-membar -mscc -mno-scc -mcond-exec -mno-cond-exec -mvliw-branch -mno-vliw-branch -mmulti-cond-exec -mno-multi-cond-exec -mnested-cond-exec -mno-nested-cond-exec -mtomcat-stats -mTLS -mtls -mcpu=cpuGNU/Linux Options -mglibc -muclibc -mmusl -mbionic -mandroid -tno-android-cc -tno-android-ld
H8/300 Options -mrelax -mh -ms -mn -mexr -mno-exr -mint32 -malign-300
HPPAOptions -march=architecture-type -mcaller-copies -mdisable-fpregs -mdisable-indexing -mfast-indirect-calls -mgas -mgnu-ld -mhp-ld -mfixed-range=register-range -mjump-in-delay -mlinker-opt -mlong-calls -mlong-load-store -mno-disable-fpregs -mno-disable-indexing -mno-fast-indirect-calls -mno-gas -mno-jump-in-delay -mno-long-load-store -mno-portable-runtime -mno-soft-float -mno-space-regs -msoft-float -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 -mportable-runtime -mschedule=cpu-type -mspace-regs -msio -mwsio -munix=unix-std -nolibdld -static -threadsIA-64Options -mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic -mvolatile-asm-stop -mregister-names -msdata -mno-sdata -mconstant-gp -mauto-pic -mfused-madd -minline-float-divide-min-latency -minline-float-divide-max-throughput -mno-inline-float-divide -minline-int-divide-min-latency -minline-int-divide-max-throughput -mno-inline-int-divide -minline-sqrt-min-latency -minline-sqrt-max-throughput -mno-inline-sqrt -mdwarf2-asm -mearly-stop-bits -mfixed-range=register-range -mtls-size=tls-size -mtune=cpu-type -milp32 -mlp64 -msched-br-data-spec -msched-ar-data-spec -msched-control-spec -msched-br-in-data-spec -msched-ar-in-data-spec -msched-in-control-spec -msched-spec-ldc -msched-spec-control-ldc -msched-prefer-non-data-spec-insns -msched-prefer-non-control-spec-insns -msched-stop-bits-after-every-cycle -msched-count-spec-in-critical-path -msel-sched-dont-check-control-spec -msched-fp-mem-deps-zero-cost -msched-max-memory-insns-hard-limit -msched-max-memory-insns=max-insnsLM32Options -mbarrel-shift-enabled -mdivide-enabled -mmultiply-enabled -msign-extend-enabled -muser-enabledM32R/D Options -m32r2 -m32rx -m32r -mdebug -malign-loops -mno-align-loops -missue-rate=number -mbranch-cost=number -mmodel=code-size-model-type -msdata=sdata-type -mno-flush-func -mflush-func=name -mno-flush-trap -mflush-trap=number -G num
M32C Options -mcpu=cpu -msim -memregs=number
M680x0 Options -march=arch -mcpu=cpu -mtune=tune -m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 -m68060 -mcpu32 -m5200 -m5206e -m528x -m5307 -m5407 -mcfv4e -mbitfield -mno-bitfield -mc68000 -mc68020 -mnobitfield -mrtd -mno-rtd -mdiv -mno-div -mshort -mno-short -mhard-float -m68881 -msoft-float -mpcrel -malign-int -mstrict-align -msep-data -mno-sep-data -mshared-library-id=n -mid-shared-library -mno-id-shared-library -mxgot -mno-xgot -mlong-jump-table-offsets
MCore Options -mhardlit -mno-hardlit -mdiv -mno-div -mrelax-immediates -mno-relax-immediates -mwide-bitfields -mno-wide-bitfields -m4byte-functions -mno-4byte-functions -mcallgraph-data -mno-callgraph-data -mslow-bytes -mno-slow-bytes -mno-lsim -mlittle-endian -mbig-endian -m210 -m340 -mstack-increment
MeP Options -mabsdiff -mall-opts -maverage -mbased=n -mbitops -mc=n -mclip -mconfig=name -mcop -mcop32 -mcop64 -mivc2 -mdc -mdiv -meb -mel -mio-volatile -ml -mleadz -mm -mminmax -mmult -mno-opts -mrepeat -ms -msatur -msdram -msim -msimnovec -mtf -mtiny=n
MicroBlaze Options -msoft-float -mhard-float -msmall-divides -mcpu=cpu -mmemcpy -mxl-soft-mul -mxl-soft-div -mxl-barrel-shift -mxl-pattern-compare -mxl-stack-check -mxl-gp-opt -mno-clearbss -mxl-multiply-high -mxl-float-convert -mxl-float-sqrt -mbig-endian -mlittle-endian -mxl-reorder -mxl-mode-app-model
MIPSOptions -EL -EB -march=arch -mtune=arch -mips1 -mips2 -mips3 -mips4 -mips32 -mips32r2 -mips32r3 -mips32r5 -mips32r6 -mips64 -mips64r2 -mips64r3 -mips64r5 -mips64r6 -mips16 -mno-mips16 -mflip-mips16 -minterlink-compressed -mno-interlink-compressed -minterlink-mips16 -mno-interlink-mips16 -mabi=abi -mabicalls -mno-abicalls -mshared -mno-shared -mplt -mno-plt -mxgot -mno-xgot -mgp32 -mgp64 -mfp32 -mfpxx -mfp64 -mhard-float -msoft-float -mno-float -msingle-float -mdouble-float -modd-spreg -mno-odd-spreg -mabs=mode -mnan=encoding -mdsp -mno-dsp -mdspr2 -mno-dspr2 -mmcu -mmno-mcu -meva -mno-eva -mvirt -mno-virt -mxpa -mno-xpa -mmicromips -mno-micromips -mmsa -mno-msa -mfpu=fpu-type -msmartmips -mno-smartmips -mpaired-single -mno-paired-single -mdmx -mno-mdmx -mips3d -mno-mips3d -mmt -mno-mt -mllsc -mno-llsc -mlong64 -mlong32 -msym32 -mno-sym32 -Gnum -mlocal-sdata -mno-local-sdata -mextern-sdata -mno-extern-sdata -mgpopt -mno-gopt -membedded-data -mno-embedded-data -muninit-const-in-rodata -mno-uninit-const-in-rodata -mcode-readable=setting -msplit-addresses -mno-split-addresses -mexplicit-relocs -mno-explicit-relocs -mcheck-zero-division -mno-check-zero-division -mdivide-traps -mdivide-breaks -mload-store-pairs -mno-load-store-pairs -mmemcpy -mno-memcpy -mlong-calls -mno-long-calls -mmad -mno-mad -mimadd -mno-imadd -mfused-madd -mno-fused-madd -nocpp -mfix-24k -mno-fix-24k -mfix-r4000 -mno-fix-r4000 -mfix-r4400 -mno-fix-r4400 -mfix-r10000 -mno-fix-r10000 -mfix-rm7000 -mno-fix-rm7000 -mfix-vr4120 -mno-fix-vr4120 -mfix-vr4130 -mno-fix-vr4130 -mfix-sb1 -mno-fix-sb1 -mflush-func=func -mno-flush-func -mbranch-cost=num -mbranch-likely -mno-branch-likely -mcompact-branches=policy -mfp-exceptions -mno-fp-exceptions -mvr4130-align -mno-vr4130-align -msynci -mno-synci -mlxc1-sxc1 -mno-lxc1-sxc1 -mmadd4 -mno-madd4 -mrelax-pic-calls -mno-relax-pic-calls -mmcount-ra-address -mframe-header-opt -mno-frame-header-optMMIXOptions -mlibfuncs -mno-libfuncs -mepsilon -mno-epsilon -mabi=gnu -mabi=mmixware -mzero-extend -mknuthdiv -mtoplevel-symbols -melf -mbranch-predict -mno-branch-predict -mbase-addresses -mno-base-addresses -msingle-exit -mno-single-exitMN10300Options -mmult-bug -mno-mult-bug -mno-am33 -mam33 -mam33-2 -mam34 -mtune=cpu-type -mreturn-pointer-on-d0 -mno-crt0 -mrelax -mliw -msetlbMoxie Options -meb -mel -mmul.x -mno-crt0
MSP430Options -msim -masm-hex -mmcu= -mcpu= -mlarge -msmall -mrelax -mwarn-mcu -mcode-region= -mdata-region= -msilicon-errata= -msilicon-errata-warn= -mhwmult= -minrtNDS32Options -mbig-endian -mlittle-endian -mreduced-regs -mfull-regs -mcmov -mno-cmov -mperf-ext -mno-perf-ext -mv3push -mno-v3push -m16bit -mno-16bit -misr-vector-size=num -mcache-block-size=num -march=arch -mcmodel=code-model -mctor-dtor -mrelaxNios
IIOptions -G num -mgpopt=option -mgpopt -mno-gpopt -mel -meb -mno-bypass-cache -mbypass-cache -mno-cache-volatile -mcache-volatile -mno-fast-sw-div -mfast-sw-div -mhw-mul -mno-hw-mul -mhw-mulx -mno-hw-mulx -mno-hw-div -mhw-div -mcustom-insn=N -mno-custom-insn -mcustom-fpu-cfg=name -mhal -msmallc -msys-crt0=name -msys-lib=name -march=arch -mbmx -mno-bmx -mcdx -mno-cdxNvidia
PTXOptions -m32 -m64 -mmainkernel -moptimizePDP-11Options -mfpu -msoft-float -mac0 -mno-ac0 -m40 -m45 -m10 -mbcopy -mbcopy-builtin -mint32 -mno-int16 -mint16 -mno-int32 -mfloat32 -mno-float64 -mfloat64 -mno-float32 -mabshi -mno-abshi -mbranch-expensive -mbranch-cheap -munix-asm -mdec-asmpicoChip Options -mae=ae_type -mvliw-lookahead=N -msymbol-as-address -mno-inefficient-warnings
PowerPC Options See
RS/6000and PowerPC Options.RISC-V Options -mbranch-cost=N-instruction -mmemcpy -mno-memcpy -mplt -mno-plt -mabi=ABI-string -mfdiv -mno-fdiv -mdiv -mno-div -march=ISA-string -mtune=processor-string -msmall-data-limit=N-bytes -msave-restore -mno-save-restore -mcmodel=code-model -mexplicit-relocs -mno-explicit-relocs
RL78Options -msim -mmul=none -mmul=g13 -mmul=g14 -mallregs -mcpu=g10 -mcpu=g13 -mcpu=g14 -mg10 -mg13 -mg14 -m64bit-doubles -m32bit-doubles -msave-mduc-in-interruptsRS/6000and PowerPC Options -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -mpowerpc64 -maltivec -mno-altivec -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mmfcrf -mno-mfcrf -mpopcntb -mno-popcntb -mpopcntd -mno-popcntd -mfprnd -mno-fprnd -mcmpb -mno-cmpb -mmfpgpr -mno-mfpgpr -mhard-dfp -mno-hard-dfp -mfull-toc -mminimal-toc -mno-fp-in-toc -mno-sum-in-toc -m64 -m32 -mxl-compat -mno-xl-compat -mpe -malign-power -malign-natural -msoft-float -mhard-float -mmultiple -mno-multiple -msingle-float -mdouble-float -msimple-fpu -mstring -mno-string -mupdate -mno-update -mavoid-indexed-addresses -mno-avoid-indexed-addresses -mfused-madd -mno-fused-madd -mbit-align -mno-bit-align -mstrict-align -mno-strict-align -mrelocatable -mno-relocatable -mrelocatable-lib -mno-relocatable-lib -mtoc -mno-toc -mlittle -mlittle-endian -mbig -mbig-endian -mdynamic-no-pic -maltivec -mswdiv -msingle-pic-base -mprioritize-restricted-insns=priority -msched-costly-dep=dependence_type -minsert-sched-nops=scheme -mcall-sysv -mcall-netbsd -maix-struct-return -msvr4-struct-return -mabi=abi-type -msecure-plt -mbss-plt -mblock-move-inline-limit=num -misel -mno-isel -misel=yes -misel=no -mspe -mno-spe -mspe=yes -mspe=no -mpaired -mgen-cell-microcode -mwarn-cell-microcode -mvrsave -mno-vrsave -mmulhw -mno-mulhw -mdlmzb -mno-dlmzb -mfloat-gprs=yes -mfloat-gprs=no -mfloat-gprs=single -mfloat-gprs=double -mprototype -mno-prototype -msim -mmvme -mads -myellowknife -memb -msdata -msdata=opt -mvxworks -G num -mrecip -mrecip=opt -mno-recip -mrecip-precision -mno-recip-precision -mveclibabi=type -mfriz -mno-friz -mpointers-to-nested-functions -mno-pointers-to-nested-functions -msave-toc-indirect -mno-save-toc-indirect -mpower8-fusion -mno-mpower8-fusion -mpower8-vector -mno-power8-vector -mcrypto -mno-crypto -mhtm -mno-htm -mdirect-move -mno-direct-move -mquad-memory -mno-quad-memory -mquad-memory-atomic -mno-quad-memory-atomic -mcompat-align-parm -mno-compat-align-parm -mupper-regs-df -mno-upper-regs-df -mupper-regs-sf -mno-upper-regs-sf -mupper-regs-di -mno-upper-regs-di -mupper-regs -mno-upper-regs -mfloat128 -mno-float128 -mfloat128-hardware -mno-float128-hardware -mgnu-attribute -mno-gnu-attribute -mstack-protector-guard=guard -mstack-protector-guard-reg=reg -mstack-protector-guard-offset=offset -mlra -mno-lraRXOptions -m64bit-doubles -m32bit-doubles -fpu -nofpu -mcpu= -mbig-endian-data -mlittle-endian-data -msmall-data -msim -mno-sim -mas100-syntax -mno-as100-syntax -mrelax -mmax-constant-size= -mint-register= -mpid -mallow-string-insns -mno-allow-string-insns -mjsr -mno-warn-multiple-fast-interrupts -msave-acc-in-interruptsS/390 and zSeries Options -mtune=cpu-type -march=cpu-type -mhard-float -msoft-float -mhard-dfp -mno-hard-dfp -mlong-double-64 -mlong-double-128 -mbackchain -mno-backchain -mpacked-stack -mno-packed-stack -msmall-exec -mno-small-exec -mmvcle -mno-mvcle -m64 -m31 -mdebug -mno-debug -mesa -mzarch -mhtm -mvx -mzvector -mtpf-trace -mno-tpf-trace -mfused-madd -mno-fused-madd -mwarn-framesize -mwarn-dynamicstack -mstack-size -mstack-guard -mhotpatch=halfwords,halfwords
Score Options -meb -mel -mnhwloop -muls -mmac -mscore5 -mscore5u -mscore7 -mscore7d
SHOptions -m1 -m2 -m2e -m2a-nofpu -m2a-single-only -m2a-single -m2a -m3 -m3e -m4-nofpu -m4-single-only -m4-single -m4 -m4a-nofpu -m4a-single-only -m4a-single -m4a -m4al -mb -ml -mdalign -mrelax -mbigtable -mfmovd -mrenesas -mno-renesas -mnomacsave -mieee -mno-ieee -mbitops -misize -minline-ic_invalidate -mpadstruct -mprefergot -musermode -multcost=number -mdiv=strategy -mdivsi3_libfunc=name -mfixed-range=register-range -maccumulate-outgoing-args -matomic-model=atomic-model -mbranch-cost=num -mzdcbranch -mno-zdcbranch -mcbranch-force-delay-slot -mfused-madd -mno-fused-madd -mfsca -mno-fsca -mfsrra -mno-fsrra -mpretend-cmove -mtasSolaris 2 Options -mclear-hwcap -mno-clear-hwcap -mimpure-text -mno-impure-text -pthreads
SPARCOptions -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -mmemory-model=mem-model -m32 -m64 -mapp-regs -mno-app-regs -mfaster-structs -mno-faster-structs -mflat -mno-flat -mfpu -mno-fpu -mhard-float -msoft-float -mhard-quad-float -msoft-quad-float -mstack-bias -mno-stack-bias -mstd-struct-return -mno-std-struct-return -munaligned-doubles -mno-unaligned-doubles -muser-mode -mno-user-mode -mv8plus -mno-v8plus -mvis -mno-vis -mvis2 -mno-vis2 -mvis3 -mno-vis3 -mvis4 -mno-vis4 -mvis4b -mno-vis4b -mcbcond -mno-cbcond -mfmaf -mno-fmaf -mfsmuld -mno-fsmuld -mpopc -mno-popc -msubxc -mno-subxc -mfix-at697f -mfix-ut699 -mfix-ut700 -mfix-gr712rc -mlra -mno-lraSPUOptions -mwarn-reloc -merror-reloc -msafe-dma -munsafe-dma -mbranch-hints -msmall-mem -mlarge-mem -mstdmain -mfixed-range=register-range -mea32 -mea64 -maddress-space-conversion -mno-address-space-conversion -mcache-size=cache-size -matomic-updates -mno-atomic-updatesSystem V Options -Qy -Qn -YP,paths -Ym,dir
TILE-Gx Options -mcpu=CPU -m32 -m64 -mbig-endian -mlittle-endian -mcmodel=code-model
TILEPro Options -mcpu=cpu -m32
V850 Options -mlong-calls -mno-long-calls -mep -mno-ep -mprolog-function -mno-prolog-function -mspace -mtda=n -msda=n -mzda=n -mapp-regs -mno-app-regs -mdisable-callt -mno-disable-callt -mv850e2v3 -mv850e2 -mv850e1 -mv850es -mv850e -mv850 -mv850e3v5 -mloop -mrelax -mlong-jumps -msoft-float -mhard-float -mgcc-abi -mrh850-abi -mbig-switch
VAXOptions -mg -mgnu -munixVisium Options -mdebug -msim -mfpu -mno-fpu -mhard-float -msoft-float -mcpu=cpu-type -mtune=cpu-type -msv-mode -muser-mode
VMSOptions -mvms-return-codes -mdebug-main=prefix -mmalloc64 -mpointer-size=sizeVxWorks Options -mrtp -non-static -Bstatic -Bdynamic -Xbind-lazy -Xbind-now
x86 Options -mtune=cpu-type -march=cpu-type -mtune-ctrl=feature-list -mdump-tune-features -mno-default -mfpmath=unit -masm=dialect -mno-fancy-math-387 -mno-fp-ret-in-387 -m80387 -mhard-float -msoft-float -mno-wide-multiply -mrtd -malign-double -mpreferred-stack-boundary=num -mincoming-stack-boundary=num -mcld -mcx16 -msahf -mmovbe -mcrc32 -mrecip -mrecip=opt -mvzeroupper -mprefer-avx128 -mmmx -msse -msse2 -msse3 -mssse3 -msse4.1 -msse4.2 -msse4 -mavx -mavx2 -mavx512f -mavx512pf -mavx512er -mavx512cd -mavx512vl -mavx512bw -mavx512dq -mavx512ifma -mavx512vbmi -msha -maes -mpclmul -mfsgsbase -mrdrnd -mf16c -mfma -mprefetchwt1 -mclflushopt -mxsavec -mxsaves -msse4a -m3dnow -m3dnowa -mpopcnt -mabm -mbmi -mtbm -mfma4 -mxop -mlzcnt -mbmi2 -mfxsr -mxsave -mxsaveopt -mrtm -mlwp -mmpx -mmwaitx -mclzero -mpku -mthreads -mms-bitfields -mno-align-stringops -minline-all-stringops -minline-stringops-dynamically -mstringop-strategy=alg -mmemcpy-strategy=strategy -mmemset-strategy=strategy -mpush-args -maccumulate-outgoing-args -m128bit-long-double -m96bit-long-double -mlong-double-64 -mlong-double-80 -mlong-double-128 -mregparm=num -msseregparm -mveclibabi=type -mvect8-ret-in-mem -mpc32 -mpc64 -mpc80 -mstackrealign -momit-leaf-frame-pointer -mno-red-zone -mno-tls-direct-seg-refs -mcmodel=code-model -mabi=name -maddress-mode=mode -m32 -m64 -mx32 -m16 -miamcu -mlarge-data-threshold=num -msse2avx -mfentry -mrecord-mcount -mnop-mcount -m8bit-idiv -mavx256-split-unaligned-load -mavx256-split-unaligned-store -malign-data=type -mstack-protector-guard=guard -mmitigate-rop -mgeneral-regs-only
x86 Windows Options -mconsole -mcygwin -mno-cygwin -mdll -mnop-fun-dllimport -mthread -municode -mwin32 -mwindows -fno-set-stack-executable
Xstormy16 Options -msim
Xtensa Options -mconst16 -mno-const16 -mfused-madd -mno-fused-madd -mforce-no-pic -mserialize-volatile -mno-serialize-volatile -mtext-section-literals -mno-text-section-literals -mauto-litpools -mno-auto-litpools -mtarget-align -mno-target-align -mlongcalls -mno-longcalls
zSeries Options See S/390 and zSeries Options.
Options Controlling the Kind of Output
Compilation can involve up to four stages: preprocessing, compilation proper, assembly and linking, always in that order.For any given input file, the file name suffix determines what kind of compilation is done:
- file.c
- C source code that must be preprocessed.
- file.i
- C source code that should not be preprocessed.
- file.ii
-
C++source code that should not be preprocessed.
- file.m
- Objective-C source code. Note that you must link with the libobjc library to make an Objective-C program work.
- file.mi
- Objective-C source code that should not be preprocessed.
- file.mm
- file.M
-
Objective-C++source code. Note that you must link with the libobjc library to make an Objective-C++program work. Note that .M refers to a literal capital M.
- file.mii
-
Objective-C++source code that should not be preprocessed.
- file.h
-
C, C++, Objective-C or Objective-C++header file to be turned into a precompiled header (default), or C, C++header file to be turned into an Ada spec (via the -fdump-ada-spec switch).
- file.cc
- file.cp
- file.cxx
- file.cpp
- file.CPP
- file.c++
- file.C
-
C++source code that must be preprocessed. Note that in .cxx, the last two letters must both be literally x. Likewise, .C refers to a literal capital C.
- file.mm
- file.M
-
Objective-C++source code that must be preprocessed.
- file.mii
-
Objective-C++source code that should not be preprocessed.
- file.hh
- file.H
- file.hp
- file.hxx
- file.hpp
- file.HPP
- file.h++
- file.tcc
-
C++header file to be turned into a precompiled header or Ada spec.
- file.f
- file.for
- file.ftn
- Fixed form Fortran source code that should not be preprocessed.
- file.F
- file.FOR
- file.fpp
- file.FPP
- file.FTN
- Fixed form Fortran source code that must be preprocessed (with the traditional preprocessor).
- file.f90
- file.f95
- file.f03
- file.f08
- Free form Fortran source code that should not be preprocessed.
- file.F90
- file.F95
- file.F03
- file.F08
- Free form Fortran source code that must be preprocessed (with the traditional preprocessor).
- file.go
- Go source code.
- file.brig
-
BRIGfiles (binary representation ofHSAIL).
- file.ads
- Ada source code file that contains a library unit declaration (a declaration of a package, subprogram, or generic, or a generic instantiation), or a library unit renaming declaration (a package, generic, or subprogram renaming declaration). Such files are also called specs.
- file.adb
- Ada source code file containing a library unit body (a subprogram or package body). Such files are also called bodies.
- file.d
- D source code file.
- file.di
- D interface code file.
- file.dd
- D documentation code file.
- file.s
- Assembler code.
- file.S
- file.sx
- Assembler code that must be preprocessed.
- other
- An object file to be fed straight into linking. Any file name with no recognized suffix is treated this way.
You can specify the input language explicitly with the -x option:
- -x language
-
Specify explicitly the language for the following input files
(rather than letting the compiler choose a default based on the file
name suffix). This option applies to all following input files until
the next -x option. Possible values for language are:
c c-header cpp-output c++ c++-header c++-cpp-output objective-c objective-c-header objective-c-cpp-output objective-c++ objective-c++-header objective-c++-cpp-output assembler assembler-with-cpp ada d f77 f77-cpp-input f95 f95-cpp-input go brig
- -x none
- Turn off any specification of a language, so that subsequent files are handled according to their file name suffixes (as they are if -x has not been used at all).
If you only want some of the stages of compilation, you can use -x (or filename suffixes) to tell gcc where to start, and one of the options -c, -S, or -E to say where gcc is to stop. Note that some combinations (for example, -x cpp-output -E) instruct gcc to do nothing at all.
- -c
-
Compile or assemble the source files, but do not link. The linking
stage simply is not done. The ultimate output is in the form of an
object file for each source file.
By default, the object file name for a source file is made by replacing the suffix .c, .i, .s, etc., with .o.
Unrecognized input files, not requiring compilation or assembly, are ignored.
- -S
-
Stop after the stage of compilation proper; do not assemble. The output
is in the form of an assembler code file for each non-assembler input
file specified.
By default, the assembler file name for a source file is made by replacing the suffix .c, .i, etc., with .s.
Input files that don't require compilation are ignored.
- -E
-
Stop after the preprocessing stage; do not run the compiler proper. The
output is in the form of preprocessed source code, which is sent to the
standard output.
Input files that don't require preprocessing are ignored.
- -o file
-
Place output in file file. This applies to whatever
sort of output is being produced, whether it be an executable file,
an object file, an assembler file or preprocessed C code.
If -o is not specified, the default is to put an executable file in a.out, the object file for source.suffix in source.o, its assembler file in source.s, a precompiled header file in source.suffix.gch, and all preprocessed C source on standard output.
- -v
- Print (on standard error output) the commands executed to run the stages of compilation. Also print the version number of the compiler driver program and of the preprocessor and the compiler proper.
- -###
- Like -v except the commands are not executed and arguments are quoted unless they contain only alphanumeric characters or "./-_". This is useful for shell scripts to capture the driver-generated command lines.
- --help
- Print (on the standard output) a description of the command-line options understood by gcc. If the -v option is also specified then --help is also passed on to the various processes invoked by gcc, so that they can display the command-line options they accept. If the -Wextra option has also been specified (prior to the --help option), then command-line options that have no documentation associated with them are also displayed.
- --target-help
- Print (on the standard output) a description of target-specific command-line options for each tool. For some targets extra target-specific information may also be printed.
- --help={class|[^]qualifier}[,...]
-
Print (on the standard output) a description of the command-line
options understood by the compiler that fit into all specified classes
and qualifiers. These are the supported classes:
-
- optimizers
- Display all of the optimization options supported by the compiler.
- warnings
- Display all of the options controlling warning messages produced by the compiler.
- target
- Display target-specific options. Unlike the --target-help option however, target-specific options of the linker and assembler are not displayed. This is because those tools do not currently support the extended --help= syntax.
- params
- Display the values recognized by the --param option.
- language
-
Display the options supported for language, where
language is the name of one of the languages supported in this
version of GCC.
- common
- Display the options that are common to all languages.
-
These are the supported qualifiers:
- undocumented
- Display only those options that are undocumented.
- joined
- Display options taking an argument that appears after an equal sign in the same continuous piece of text, such as: --help=target.
- separate
- Display options taking an argument that appears as a separate word following the original option, such as: -o output-file.
-
Thus for example to display all the undocumented target-specific switches supported by the compiler, use:
--help=target,undocumented
The sense of a qualifier can be inverted by prefixing it with the ^ character, so for example to display all binary warning options (i.e., ones that are either on or off and that do not take an argument) that have a description, use:
--help=warnings,^joined,^undocumented
The argument to --help= should not consist solely of inverted qualifiers.
Combining several classes is possible, although this usually restricts the output so much that there is nothing to display. One case where it does work, however, is when one of the classes is target. For example, to display all the target-specific optimization options, use:
--help=target,optimizers
The --help= option can be repeated on the command line. Each successive use displays its requested class of options, skipping those that have already been displayed.
If the -Q option appears on the command line before the --help= option, then the descriptive text displayed by --help= is changed. Instead of describing the displayed options, an indication is given as to whether the option is enabled, disabled or set to a specific value (assuming that the compiler knows this at the point where the --help= option is used).
Here is a truncated example from the
ARMport of gcc:% gcc -Q -mabi=2 --help=target -c The following options are target specific: -mabi= 2 -mabort-on-noreturn [disabled] -mapcs [disabled]
The output is sensitive to the effects of previous command-line options, so for example it is possible to find out which optimizations are enabled at -O2 by using:
-Q -O2 --help=optimizers
Alternatively you can discover which binary optimizations are enabled by -O3 by using:
gcc -c -Q -O3 --help=optimizers > /tmp/O3-opts gcc -c -Q -O2 --help=optimizers > /tmp/O2-opts diff /tmp/O2-opts /tmp/O3-opts | grep enabled
-
- --version
-
Display the version number and copyrights of the invoked GCC.
- -pass-exit-codes
-
Normally the gcc program exits with the code of 1 if any
phase of the compiler returns a non-success return code. If you specify
-pass-exit-codes, the gcc program instead returns with
the numerically highest error produced by any phase returning an error
indication. The C, C++, and Fortran front ends return 4 if an internal compiler error is encountered.
- -pipe
-
Use pipes rather than temporary files for communication between the
various stages of compilation. This fails to work on some systems where
the assembler is unable to read from a pipe; but the GNUassembler has no trouble.
- -specs=file
- Process file after the compiler reads in the standard specs file, in order to override the defaults which the gcc driver program uses when determining what switches to pass to cc1, cc1plus, as, ld, etc. More than one -specs=file can be specified on the command line, and they are processed in order, from left to right.
- -wrapper
-
Invoke all subcommands under a wrapper program. The name of the
wrapper program and its parameters are passed as a comma separated
list.
gcc -c t.c -wrapper gdb,--args
This invokes all subprograms of gcc under gdb --args, thus the invocation of cc1 is gdb --args cc1 ....
- -fplugin=name.so
-
Load the plugin code in file name.so, assumed to be a
shared object to be dlopen'd by the compiler. The base name of
the shared object file is used to identify the plugin for the
purposes of argument parsing (See
-fplugin-arg-name-key=value below).
Each plugin should define the callback functions specified in the
Plugins API.
- -fplugin-arg-name-key=value
- Define an argument called key with a value of value for the plugin called name.
- -fdump-ada-spec[-slim]
-
For C and C++source and include files, generate corresponding Ada specs.
- -fada-spec-parent=unit
- In conjunction with -fdump-ada-spec[-slim] above, generate Ada specs as child units of parent unit.
- -fdump-go-spec=file
- For input files in any language, generate corresponding Go declarations in file. This generates Go "const", "type", "var", and "func" declarations which may be a useful way to start writing a Go interface to code written in some other language.
- @file
-
Read command-line options from file. The options read are
inserted in place of the original @file option. If file
does not exist, or cannot be read, then the option will be treated
literally, and not removed.
Options in file are separated by whitespace. A whitespace character may be included in an option by surrounding the entire option in either single or double quotes. Any character (including a backslash) may be included by prefixing the character to be included with a backslash. The file may itself contain additional @file options; any such options will be processed recursively.
Compiling C++ Programs
CHowever, the use of gcc does not add the C
When you compile C
Options Controlling C Dialect
The following options control the dialect of C (or languages derived from C, such as C- -ansi
-
In C mode, this is equivalent to -std=c90. In C++mode, it is equivalent to -std=c++98.
This turns off certain features of
GCCthat are incompatible withISO C90(when compiling C code), or of standard C++(when compiling C++code), such as the "asm" and "typeof" keywords, and predefined macros such as "unix" and "vax" that identify the type of system you are using. It also enables the undesirable and rarely usedISOtrigraph feature. For the C compiler, it disables recognition of C++style // comments as well as the "inline" keyword.The alternate keywords "__asm__", "__extension__", "__inline__" and "__typeof__" continue to work despite -ansi. You would not want to use them in an
ISO Cprogram, of course, but it is useful to put them in header files that might be included in compilations done with -ansi. Alternate predefined macros such as "__unix__" and "__vax__" are also available, with or without -ansi.The -ansi option does not cause non-ISO programs to be rejected gratuitously. For that, -Wpedantic is required in addition to -ansi.
The macro "__STRICT_ANSI__" is predefined when the -ansi option is used. Some header files may notice this macro and refrain from declaring certain functions or defining certain macros that the
ISOstandard doesn't call for; this is to avoid interfering with any programs that might use these names for other things.Functions that are normally built in but do not have semantics defined by
ISO C(such as "alloca" and "ffs") are not built-in functions when -ansi is used. - -std=
-
Determine the language standard. This option
is currently only supported when compiling C or C++.
The compiler can accept several base standards, such as c90 or c++98, and
GNUdialects of those standards, such as gnu90 or gnu++98. When a base standard is specified, the compiler accepts all programs following that standard plus those usingGNUextensions that do not contradict it. For example, -std=c90 turns off certain features ofGCCthat are incompatible withISO C90,such as the "asm" and "typeof" keywords, but not otherGNUextensions that do not have a meaning inISO C90,such as omitting the middle term of a "?:" expression. On the other hand, when aGNUdialect of a standard is specified, all features supported by the compiler are enabled, even when those features change the meaning of the base standard. As a result, some strict-conforming programs may be rejected. The particular standard is used by -Wpedantic to identify which features areGNUextensions given that version of the standard. For example -std=gnu90 -Wpedantic warns about C++style // comments, while -std=gnu99 -Wpedantic does not.A value for this option must be provided; possible values are
-
- c90
- c89
- iso9899:1990
-
Support all ISO C90programs (certainGNUextensions that conflict withISO C90are disabled). Same as -ansi for C code.
- iso9899:199409
-
ISO C90as modified in amendment 1.
- c99
- c9x
- iso9899:1999
- iso9899:199x
-
ISO C99.This standard is substantially completely supported, modulo bugs and floating-point issues (mainly but not entirely relating to optional C99 features from Annexes F and G). See <gcc.gnu.org/c99status.html> for more information. The names c9x and iso9899:199x are deprecated.
- c11
- c1x
- iso9899:2011
-
ISO C11,the 2011 revision of theISO Cstandard. This standard is substantially completely supported, modulo bugs, floating-point issues (mainly but not entirely relating to optional C11 features from Annexes F and G) and the optional Annexes K (Bounds-checking interfaces) and L (Analyzability). The name c1x is deprecated.
- gnu90
- gnu89
-
GNUdialect ofISO C90(including some C99 features).
- gnu99
- gnu9x
-
GNUdialect ofISO C99.The name gnu9x is deprecated.
- gnu11
- gnu1x
-
GNUdialect ofISO C11.This is the default for C code. The name gnu1x is deprecated.
- c++98
- c++03
-
The 1998 ISO Cstandard plus the 2003 technical corrigendum and some additional defect reports. Same as -ansi for C++++code.
- gnu++98
- gnu++03
-
GNUdialect of -std=c++98.
- c++11
- c++0x
-
The 2011 ISO Cstandard plus amendments. The name c++0x is deprecated.++
- gnu++11
- gnu++0x
-
GNUdialect of -std=c++11. The name gnu++0x is deprecated.
- c++14
- c++1y
-
The 2014 ISO Cstandard plus amendments. The name c++1y is deprecated.++
- gnu++14
- gnu++1y
-
GNUdialect of -std=c++14. This is the default for C++code. The name gnu++1y is deprecated.
- c++1z
-
The next revision of the ISO Cstandard, tentatively planned for 2017. Support is highly experimental, and will almost certainly change in incompatible ways in future releases.++
- gnu++1z
-
GNUdialect of -std=c++1z. Support is highly experimental, and will almost certainly change in incompatible ways in future releases.
-
- -fgnu89-inline
-
The option -fgnu89-inline tells GCCto use the traditionalGNUsemantics for "inline" functions when in C99 mode.
Using this option is roughly equivalent to adding the "gnu_inline" function attribute to all inline functions.
The option -fno-gnu89-inline explicitly tells
GCCto use the C99 semantics for "inline" when in C99 or gnu99 mode (i.e., it specifies the default behavior). This option is not supported in -std=c90 or -std=gnu90 mode.The preprocessor macros "__GNUC_GNU_INLINE__" and "__GNUC_STDC_INLINE__" may be used to check which semantics are in effect for "inline" functions.
- -fpermitted-flt-eval-methods=style
-
ISO/IEC TS 18661-3defines new permissible values for "FLT_EVAL_METHOD" that indicate that operations and constants with a semantic type that is an interchange or extended format should be evaluated to the precision and range of that type. These new values are a superset of those permitted under C99/C11, which does not specify the meaning of other positive values of "FLT_EVAL_METHOD". As such, code conforming to C11 may not have been written expecting the possibility of the new values.
-fpermitted-flt-eval-methods specifies whether the compiler should allow only the values of "FLT_EVAL_METHOD" specified in C99/C11, or the extended set of values specified in
ISO/IEC TS 18661-3.style is either "c11" or "ts-18661-3" as appropriate.
The default when in a standards compliant mode (-std=c11 or similar) is -fpermitted-flt-eval-methods=c11. The default when in a
GNUdialect (-std=gnu11 or similar) is -fpermitted-flt-eval-methods=ts-18661-3. - -aux-info filename
-
Output to the given filename prototyped declarations for all functions
declared and/or defined in a translation unit, including those in header
files. This option is silently ignored in any language other than C.
Besides declarations, the file indicates, in comments, the origin of each declaration (source file and line), whether the declaration was implicit, prototyped or unprototyped (I, N for new or O for old, respectively, in the first character after the line number and the colon), and whether it came from a declaration or a definition (C or F, respectively, in the following character). In the case of function definitions, a K&R-style list of arguments followed by their declarations is also provided, inside comments, after the declaration.
- -fallow-parameterless-variadic-functions
-
Accept variadic functions without named parameters.
Although it is possible to define such a function, this is not very useful as it is not possible to read the arguments. This is only supported for C as this construct is allowed by C
++. - -fno-asm
-
Do not recognize "asm", "inline" or "typeof" as a
keyword, so that code can use these words as identifiers. You can use
the keywords "__asm__", "__inline__" and "__typeof__"
instead. -ansi implies -fno-asm.
In C
++, this switch only affects the "typeof" keyword, since "asm" and "inline" are standard keywords. You may want to use the -fno-gnu-keywords flag instead, which has the same effect. In C99 mode (-std=c99 or -std=gnu99), this switch only affects the "asm" and "typeof" keywords, since "inline" is a standard keyword inISO C99. - -fno-builtin
- -fno-builtin-function
-
Don't recognize built-in functions that do not begin with
__builtin_ as prefix.
GCCnormally generates special code to handle certain built-in functions more efficiently; for instance, calls to "alloca" may become single instructions which adjust the stack directly, and calls to "memcpy" may become inline copy loops. The resulting code is often both smaller and faster, but since the function calls no longer appear as such, you cannot set a breakpoint on those calls, nor can you change the behavior of the functions by linking with a different library. In addition, when a function is recognized as a built-in function,GCCmay use information about that function to warn about problems with calls to that function, or to generate more efficient code, even if the resulting code still contains calls to that function. For example, warnings are given with -Wformat for bad calls to "printf" when "printf" is built in and "strlen" is known not to modify global memory.
With the -fno-builtin-function option only the built-in function function is disabled. function must not begin with __builtin_. If a function is named that is not built-in in this version of
GCC,this option is ignored. There is no corresponding -fbuiltin-function option; if you wish to enable built-in functions selectively when using -fno-builtin or -ffreestanding, you may define macros such as:#define abs(n) __builtin_abs ((n)) #define strcpy(d, s) __builtin_strcpy ((d), (s))
- -fgimple
-
Enable parsing of function definitions marked with "__GIMPLE".
This is an experimental feature that allows unit testing of GIMPLEpasses.
- -fhosted
- Assert that compilation targets a hosted environment. This implies -fbuiltin. A hosted environment is one in which the entire standard library is available, and in which "main" has a return type of "int". Examples are nearly everything except a kernel. This is equivalent to -fno-freestanding.
- -ffreestanding
-
Assert that compilation targets a freestanding environment. This
implies -fno-builtin. A freestanding environment
is one in which the standard library may not exist, and program startup may
not necessarily be at "main". The most obvious example is an OSkernel. This is equivalent to -fno-hosted.
- -fopenacc
-
Enable handling of OpenACC directives "#pragma acc" in C/C++and "!$acc" in Fortran. When -fopenacc is specified, the compiler generates accelerated code according to the OpenACC Application Programming Interface v2.0 <www.openacc.org>. This option implies -pthread, and thus is only supported on targets that have support for -pthread.
- -fopenacc-dim=geom
- Specify default compute dimensions for parallel offload regions that do not explicitly specify. The geom value is a triple of ':'-separated sizes, in order 'gang', 'worker' and, 'vector'. A size can be omitted, to use a target-specific default value.
- -fopenmp
-
Enable handling of OpenMP directives "#pragma omp" in C/C++and "!$omp" in Fortran. When -fopenmp is specified, the compiler generates parallel code according to the OpenMP Application Program Interface v4.5 <www.openmp.org>. This option implies -pthread, and thus is only supported on targets that have support for -pthread. -fopenmp implies -fopenmp-simd.
- -fopenmp-simd
-
Enable handling of OpenMP's SIMDdirectives with "#pragma omp" in C/C++and "!$omp" in Fortran. Other OpenMP directives are ignored.
- -fcilkplus
-
Enable the usage of Cilk Plus language extension features for C/C++. When the option -fcilkplus is specified, enable the usage of the Cilk Plus Language extension features for C/C++. The present implementation followsABIversion 1.2. This is an experimental feature that is only partially complete, and whose interface may change in future versions ofGCCas the official specification changes. Currently, all features but "_Cilk_for" have been implemented.
- -fgnu-tm
-
When the option -fgnu-tm is specified, the compiler
generates code for the Linux variant of Intel's current Transactional
Memory ABIspecification document (Revision 1.1, May 6 2009). This is an experimental feature whose interface may change in future versions ofGCC,as the official specification changes. Please note that not all architectures are supported for this feature.
For more information on
GCC's support for transactional memory,Note that the transactional memory feature is not supported with non-call exceptions (-fnon-call-exceptions).
- -fms-extensions
-
Accept some non-standard constructs used in Microsoft header files.
In C
++code, this allows member names in structures to be similar to previous types declarations.typedef int UOW; struct ABC { UOW UOW; };
Some cases of unnamed fields in structures and unions are only accepted with this option.
Note that this option is off for all targets but x86 targets using ms-abi.
- -fplan9-extensions
-
Accept some non-standard constructs used in Plan 9 code.
This enables -fms-extensions, permits passing pointers to structures with anonymous fields to functions that expect pointers to elements of the type of the field, and permits referring to anonymous fields declared using a typedef. This is only supported for C, not C
++. - -fcond-mismatch
-
Allow conditional expressions with mismatched types in the second and
third arguments. The value of such an expression is void. This option
is not supported for C++.
- -flax-vector-conversions
- Allow implicit conversions between vectors with differing numbers of elements and/or incompatible element types. This option should not be used for new code.
- -funsigned-char
-
Let the type "char" be unsigned, like "unsigned char".
Each kind of machine has a default for what "char" should be. It is either like "unsigned char" by default or like "signed char" by default.
Ideally, a portable program should always use "signed char" or "unsigned char" when it depends on the signedness of an object. But many programs have been written to use plain "char" and expect it to be signed, or expect it to be unsigned, depending on the machines they were written for. This option, and its inverse, let you make such a program work with the opposite default.
The type "char" is always a distinct type from each of "signed char" or "unsigned char", even though its behavior is always just like one of those two.
- -fsigned-char
-
Let the type "char" be signed, like "signed char".
Note that this is equivalent to -fno-unsigned-char, which is the negative form of -funsigned-char. Likewise, the option -fno-signed-char is equivalent to -funsigned-char.
- -fsigned-bitfields
- -funsigned-bitfields
- -fno-signed-bitfields
- -fno-unsigned-bitfields
- These options control whether a bit-field is signed or unsigned, when the declaration does not use either "signed" or "unsigned". By default, such a bit-field is signed, because this is consistent: the basic integer types such as "int" are signed types.
- -fsso-struct=endianness
-
Set the default scalar storage order of structures and unions to the
specified endianness. The accepted values are big-endian,
little-endian and native for the native endianness of
the target (the default). This option is not supported for C++.
Warning: the -fsso-struct switch causes
GCCto generate code that is not binary compatible with code generated without it if the specified endianness is not the native endianness of the target.
Options Controlling C++ Dialect
This section describes the command-line options that are only meaningful
for C
g++ -g -fstrict-enums -O -c firstClass.C
In this example, only -fstrict-enums is an option meant only for C
Some options for compiling C programs, such as -std, are also relevant for C
Here is a list of options that are only for compiling C
- -fabi-version=n
-
Use version n of the C++ABI.The default is version 0.
Version 0 refers to the version conforming most closely to the C
++ABIspecification. Therefore, theABIobtained using version 0 will change in different versions of G++ asABIbugs are fixed.Version 1 is the version of the C
++ABIthat first appeared in G++ 3.2.Version 2 is the version of the C
++ABIthat first appeared in G++ 3.4, and was the default through G++ 4.9.Version 3 corrects an error in mangling a constant address as a template argument.
Version 4, which first appeared in G++ 4.5, implements a standard mangling for vector types.
Version 5, which first appeared in G++ 4.6, corrects the mangling of attribute const/volatile on function pointer types, decltype of a plain decl, and use of a function parameter in the declaration of another parameter.
Version 6, which first appeared in G++ 4.7, corrects the promotion behavior of C
++11 scoped enums and the mangling of template argument packs, const/static_cast, prefix ++ and --, and a class scope function used as a template argument.Version 7, which first appeared in G++ 4.8, that treats nullptr_t as a builtin type and corrects the mangling of lambdas in default argument scope.
Version 8, which first appeared in G++ 4.9, corrects the substitution behavior of function types with function-cv-qualifiers.
Version 9, which first appeared in G++ 5.2, corrects the alignment of "nullptr_t".
Version 10, which first appeared in G++ 6.1, adds mangling of attributes that affect type identity, such as ia32 calling convention attributes (e.g. stdcall).
Version 11, which first appeared in G++ 7, corrects the mangling of sizeof... expressions and operator names. For multiple entities with the same name within a function, that are declared in different scopes, the mangling now changes starting with the twelfth occurrence. It also implies -fnew-inheriting-ctors.
See also -Wabi.
- -fabi-compat-version=n
-
On targets that support strong aliases, G++
works around mangling changes by creating an alias with the correct
mangled name when defining a symbol with an incorrect mangled name.
This switch specifies which ABIversion to use for the alias.
With -fabi-version=0 (the default), this defaults to 8 (
GCC 5compatibility). If anotherABIversion is explicitly selected, this defaults to 0. For compatibility withGCCversions 3.2 through 4.9, use -fabi-compat-version=2.If this option is not provided but -Wabi=n is, that version is used for compatibility aliases. If this option is provided along with -Wabi (without the version), the version from this option is used for the warning.
- -fno-access-control
- Turn off all access checking. This switch is mainly useful for working around bugs in the access control code.
- -faligned-new
-
Enable support for C++17 "new" of types that require more alignment than "void* ::operator new(std::size_t)" provides. A numeric argument such as "-faligned-new=32" can be used to specify how much alignment (in bytes) is provided by that function, but few users will need to override the default of "alignof(std::max_align_t)".
- -fcheck-new
-
Check that the pointer returned by "operator new" is non-null
before attempting to modify the storage allocated. This check is
normally unnecessary because the C++standard specifies that "operator new" only returns 0 if it is declared "throw()", in which case the compiler always checks the return value even without this option. In all other cases, when "operator new" has a non-empty exception specification, memory exhaustion is signalled by throwing "std::bad_alloc". See also new (nothrow).
- -fconcepts
-
Enable support for the C++Extensions for Concepts Technical Specification,ISO 19217(2015), which allows code like
template <class T> concept bool Addable = requires (T t) { t + t; }; template <Addable T> T add (T a, T b) { return a + b; }
- -fconstexpr-depth=n
-
Set the maximum nested evaluation depth for C++11 constexpr functions to n. A limit is needed to detect endless recursion during constant expression evaluation. The minimum specified by the standard is 512.
- -fconstexpr-loop-limit=n
-
Set the maximum number of iterations for a loop in C++14 constexpr functions to n. A limit is needed to detect infinite loops during constant expression evaluation. The default is 262144 (1<<18).
- -fdeduce-init-list
-
Enable deduction of a template type parameter as
"std::initializer_list" from a brace-enclosed initializer list, i.e.
template <class T> auto forward(T t) -> decltype (realfn (t)) { return realfn (t); } void f() { forward({1,2}); // call forward<std::initializer_list<int>> }
This deduction was implemented as a possible extension to the originally proposed semantics for the C
++11 standard, but was not part of the final standard, so it is disabled by default. This option is deprecated, and may be removed in a future version of G++. - -ffriend-injection
-
Inject friend functions into the enclosing namespace, so that they are
visible outside the scope of the class in which they are declared.
Friend functions were documented to work this way in the old Annotated
C++Reference Manual. However, inISO Ca friend function that is not declared in an enclosing scope can only be found using argument dependent lookup.++GCCdefaults to the standard behavior.
This option is for compatibility, and may be removed in a future release of G++.
- -fno-elide-constructors
-
The C++standard allows an implementation to omit creating a temporary that is only used to initialize another object of the same type. Specifying this option disables that optimization, and forces G++ to call the copy constructor in all cases. This option also causes G++ to call trivial member functions which otherwise would be expanded inline.
In C
++17, the compiler is required to omit these temporaries, but this option still affects trivial member functions. - -fno-enforce-eh-specs
-
Don't generate code to check for violation of exception specifications
at run time. This option violates the C++standard, but may be useful for reducing code size in production builds, much like defining "NDEBUG". This does not give user code permission to throw exceptions in violation of the exception specifications; the compiler still optimizes based on the specifications, so throwing an unexpected exception results in undefined behavior at run time.
- -fextern-tls-init
- -fno-extern-tls-init
-
The C++11 and OpenMP standards allow "thread_local" and "threadprivate" variables to have dynamic (runtime) initialization. To support this, any use of such a variable goes through a wrapper function that performs any necessary initialization. When the use and definition of the variable are in the same translation unit, this overhead can be optimized away, but when the use is in a different translation unit there is significant overhead even if the variable doesn't actually need dynamic initialization. If the programmer can be sure that no use of the variable in a non-definingTUneeds to trigger dynamic initialization (either because the variable is statically initialized, or a use of the variable in the definingTUwill be executed before any uses in anotherTU), they can avoid this overhead with the -fno-extern-tls-init option.
On targets that support symbol aliases, the default is -fextern-tls-init. On targets that do not support symbol aliases, the default is -fno-extern-tls-init.
- -ffor-scope
- -fno-for-scope
-
If -ffor-scope is specified, the scope of variables declared in
a for-init-statement is limited to the "for" loop itself,
as specified by the C++standard. If -fno-for-scope is specified, the scope of variables declared in a for-init-statement extends to the end of the enclosing scope, as was the case in old versions of G++, and other (traditional) implementations of C++.
If neither flag is given, the default is to follow the standard, but to allow and give a warning for old-style code that would otherwise be invalid, or have different behavior.
- -fno-gnu-keywords
-
Do not recognize "typeof" as a keyword, so that code can use this
word as an identifier. You can use the keyword "__typeof__" instead.
This option is implied by the strict ISO Cdialects: -ansi, -std=c++98, -std=c++11, etc.++
- -fno-implicit-templates
- Never emit code for non-inline templates that are instantiated implicitly (i.e. by use); only emit code for explicit instantiations.
- -fno-implicit-inline-templates
- Don't emit code for implicit instantiations of inline templates, either. The default is to handle inlines differently so that compiles with and without optimization need the same set of explicit instantiations.
- -fno-implement-inlines
- To save space, do not emit out-of-line copies of inline functions controlled by "#pragma implementation". This causes linker errors if these functions are not inlined everywhere they are called.
- -fms-extensions
-
Disable Wpedantic warnings about constructs used in MFC,such as implicit int and getting a pointer to member function via non-standard syntax.
- -fnew-inheriting-ctors
-
Enable the P0136 adjustment to the semantics of C++11 constructor inheritance. This is part of C++17 but also considered to be a Defect Report against C++11 and C++14. This flag is enabled by default unless -fabi-version=10 or lower is specified.
- -fnew-ttp-matching
- Enable the P0522 resolution to Core issue 150, template template parameters and default arguments: this allows a template with default template arguments as an argument for a template template parameter with fewer template parameters. This flag is enabled by default for -std=c++1z.
- -fno-nonansi-builtins
-
Disable built-in declarations of functions that are not mandated by
ANSI/ISO C.These include "ffs", "alloca", "_exit", "index", "bzero", "conjf", and other related functions.
- -fnothrow-opt
-
Treat a "throw()" exception specification as if it were a
"noexcept" specification to reduce or eliminate the text size
overhead relative to a function with no exception specification. If
the function has local variables of types with non-trivial
destructors, the exception specification actually makes the
function smaller because the EHcleanups for those variables can be optimized away. The semantic effect is that an exception thrown out of a function with such an exception specification results in a call to "terminate" rather than "unexpected".
- -fno-operator-names
- Do not treat the operator name keywords "and", "bitand", "bitor", "compl", "not", "or" and "xor" as synonyms as keywords.
- -fno-optional-diags
- Disable diagnostics that the standard says a compiler does not need to issue. Currently, the only such diagnostic issued by G++ is the one for a name having multiple meanings within a class.
- -fpermissive
- Downgrade some diagnostics about nonconformant code from errors to warnings. Thus, using -fpermissive allows some nonconforming code to compile.
- -fno-pretty-templates
- When an error message refers to a specialization of a function template, the compiler normally prints the signature of the template followed by the template arguments and any typedefs or typenames in the signature (e.g. "void f(T) [with T = int]" rather than "void f(int)") so that it's clear which template is involved. When an error message refers to a specialization of a class template, the compiler omits any template arguments that match the default template arguments for that template. If either of these behaviors make it harder to understand the error message rather than easier, you can use -fno-pretty-templates to disable them.
- -frepo
- Enable automatic template instantiation at link time. This option also implies -fno-implicit-templates.
- -fno-rtti
-
Disable generation of information about every class with virtual
functions for use by the C++run-time type identification features ("dynamic_cast" and "typeid"). If you don't use those parts of the language, you can save some space by using this flag. Note that exception handling uses the same information, but G++ generates it as needed. The "dynamic_cast" operator can still be used for casts that do not require run-time type information, i.e. casts to "void *" or to unambiguous base classes.
- -fsized-deallocation
-
Enable the built-in global declarations
void operator delete (void *, std::size_t) noexcept; void operator delete[] (void *, std::size_t) noexcept;
as introduced in C
++14. This is useful for user-defined replacement deallocation functions that, for example, use the size of the object to make deallocation faster. Enabled by default under -std=c++14 and above. The flag -Wsized-deallocation warns about places that might want to add a definition. - -fstrict-enums
-
Allow the compiler to optimize using the assumption that a value of
enumerated type can only be one of the values of the enumeration (as
defined in the C++standard; basically, a value that can be represented in the minimum number of bits needed to represent all the enumerators). This assumption may not be valid if the program uses a cast to convert an arbitrary integer value to the enumerated type.
- -fstrong-eval-order
-
Evaluate member access, array subscripting, and shift expressions in
left-to-right order, and evaluate assignment in right-to-left order,
as adopted for C++17. Enabled by default with -std=c++1z. -fstrong-eval-order=some enables just the ordering of member access and shift expressions, and is the default without -std=c++1z.
- -ftemplate-backtrace-limit=n
- Set the maximum number of template instantiation notes for a single warning or error to n. The default value is 10.
- -ftemplate-depth=n
-
Set the maximum instantiation depth for template classes to n.
A limit on the template instantiation depth is needed to detect
endless recursions during template class instantiation. ANSI/ISO Cconforming programs must not rely on a maximum depth greater than 17 (changed to 1024 in C++++11). The default value is 900, as the compiler can run out of stack space before hitting 1024 in some situations.
- -fno-threadsafe-statics
-
Do not emit the extra code to use the routines specified in the C++ABIfor thread-safe initialization of local statics. You can use this option to reduce code size slightly in code that doesn't need to be thread-safe.
- -fuse-cxa-atexit
- Register destructors for objects with static storage duration with the "__cxa_atexit" function rather than the "atexit" function. This option is required for fully standards-compliant handling of static destructors, but only works if your C library supports "__cxa_atexit".
- -fno-use-cxa-get-exception-ptr
- Don't use the "__cxa_get_exception_ptr" runtime routine. This causes "std::uncaught_exception" to be incorrect, but is necessary if the runtime routine is not available.
- -fvisibility-inlines-hidden
-
This switch declares that the user does not attempt to compare
pointers to inline functions or methods where the addresses of the two functions
are taken in different shared objects.
The effect of this is that
GCCmay, effectively, mark inline methods with "__attribute__ ((visibility ("hidden")))" so that they do not appear in the export table of aDSOand do not require aPLTindirection when used within theDSO.Enabling this option can have a dramatic effect on load and link times of aDSOas it massively reduces the size of the dynamic export table when the library makes heavy use of templates.The behavior of this switch is not quite the same as marking the methods as hidden directly, because it does not affect static variables local to the function or cause the compiler to deduce that the function is defined in only one shared object.
You may mark a method as having a visibility explicitly to negate the effect of the switch for that method. For example, if you do want to compare pointers to a particular inline method, you might mark it as having default visibility. Marking the enclosing class with explicit visibility has no effect.
Explicitly instantiated inline methods are unaffected by this option as their linkage might otherwise cross a shared library boundary.
- -fvisibility-ms-compat
-
This flag attempts to use visibility settings to make GCC's C++linkage model compatible with that of Microsoft Visual Studio.
The flag makes these changes to
GCC's linkage model:-
- 1.
- It sets the default visibility to "hidden", like -fvisibility=hidden.
- 2.
- Types, but not their members, are not hidden by default.
- 3.
- The One Definition Rule is relaxed for types without explicit visibility specifications that are defined in more than one shared object: those declarations are permitted if they are permitted when this option is not used.
-
In new code it is better to use -fvisibility=hidden and export those classes that are intended to be externally visible. Unfortunately it is possible for code to rely, perhaps accidentally, on the Visual Studio behavior.
Among the consequences of these changes are that static data members of the same type with the same name but defined in different shared objects are different, so changing one does not change the other; and that pointers to function members defined in different shared objects may not compare equal. When this flag is given, it is a violation of the
ODRto define types with the same name differently.
-
- -fno-weak
- Do not use weak symbol support, even if it is provided by the linker. By default, G++ uses weak symbols if they are available. This option exists only for testing, and should not be used by end-users; it results in inferior code and has no benefits. This option may be removed in a future release of G++.
- -nostdinc++
-
Do not search for header files in the standard directories specific to
C++, but do still search the other standard directories. (This option is used when building the C++library.)
In addition, these optimization, warning, and code generation options have meanings only for C
- -Wabi (C, Objective-C, C++and Objective-C++only)
-
Warn when G++ it generates code that is probably not compatible with
the vendor-neutral C++ABI.Since G++ now defaults to updating theABIwith each major release, normally -Wabi will warn only if there is a check added later in a release series for anABIissue discovered since the initial release. -Wabi will warn about more things if an olderABIversion is selected (with -fabi-version=n).
-Wabi can also be used with an explicit version number to warn about compatibility with a particular -fabi-version level, e.g. -Wabi=2 to warn about changes relative to -fabi-version=2.
If an explicit version number is provided and -fabi-compat-version is not specified, the version number from this option is used for compatibility aliases. If no explicit version number is provided with this option, but -fabi-compat-version is specified, that version number is used for
ABIwarnings.Although an effort has been made to warn about all such cases, there are probably some cases that are not warned about, even though G++ is generating incompatible code. There may also be cases where warnings are emitted even though the code that is generated is compatible.
You should rewrite your code to avoid these warnings if you are concerned about the fact that code generated by G++ may not be binary compatible with code generated by other compilers.
Known incompatibilities in -fabi-version=2 (which was the default from
GCC 3.4to 4.9) include:-
- *
-
A template with a non-type template parameter of reference type was
mangled incorrectly:
extern int N; template <int &> struct S {}; void n (S<N>) {2}
This was fixed in -fabi-version=3.
- *
-
SIMDvector types declared using "__attribute ((vector_size))" were mangled in a non-standard way that does not allow for overloading of functions taking vectors of different sizes.
The mangling was changed in -fabi-version=4.
- *
-
"__attribute ((const))" and "noreturn" were mangled as type
qualifiers, and "decltype" of a plain declaration was folded away.
These mangling issues were fixed in -fabi-version=5.
- *
-
Scoped enumerators passed as arguments to a variadic function are
promoted like unscoped enumerators, causing "va_arg" to complain.
On most targets this does not actually affect the parameter passing
ABI,as there is no way to pass an argument smaller than "int".
Also, the
ABIchanged the mangling of template argument packs, "const_cast", "static_cast", prefix increment/decrement, and a class scope function used as a template argument.These issues were corrected in -fabi-version=6.
- *
-
Lambdas in default argument scope were mangled incorrectly, and the
ABIchanged the mangling of "nullptr_t".
These issues were corrected in -fabi-version=7.
- *
-
When mangling a function type with function-cv-qualifiers, the
un-qualified function type was incorrectly treated as a substitution
candidate.
This was fixed in -fabi-version=8, the default for
GCC 5.1. - *
-
"decltype(nullptr)" incorrectly had an alignment of 1, leading to
unaligned accesses. Note that this did not affect the ABIof a function with a "nullptr_t" parameter, as parameters have a minimum alignment.
This was fixed in -fabi-version=9, the default for
GCC 5.2. - *
-
Target-specific attributes that affect the identity of a type, such as
ia32 calling conventions on a function type (stdcall, regparm, etc.),
did not affect the mangled name, leading to name collisions when
function pointers were used as template arguments.
This was fixed in -fabi-version=10, the default for
GCC 6.1.
-
It also warns about psABI-related changes. The known psABI changes at this point include:
- *
-
For SysV/x86-64, unions with "long double" members are
passed in memory as specified in psABI. For example:
union U { long double ld; int i; };
"union U" is always passed in memory.
-
- -Wabi-tag (C++and Objective-C++only)
-
Warn when a type with an ABItag is used in a context that does not have thatABItag. See C++Attributes for more information aboutABItags.
- -Wctor-dtor-privacy (C++and Objective-C++only)
- Warn when a class seems unusable because all the constructors or destructors in that class are private, and it has neither friends nor public static member functions. Also warn if there are no non-private methods, and there's at least one private member function that isn't a constructor or destructor.
- -Wdelete-non-virtual-dtor (C++and Objective-C++only)
- Warn when "delete" is used to destroy an instance of a class that has virtual functions and non-virtual destructor. It is unsafe to delete an instance of a derived class through a pointer to a base class if the base class does not have a virtual destructor. This warning is enabled by -Wall.
- -Wliteral-suffix (C++and Objective-C++only)
-
Warn when a string or character literal is followed by a ud-suffix which does
not begin with an underscore. As a conforming extension, GCCtreats such suffixes as separate preprocessing tokens in order to maintain backwards compatibility with code that uses formatting macros from "<inttypes.h>". For example:
#define __STDC_FORMAT_MACROS #include <inttypes.h> #include <stdio.h> int main() { int64_t i64 = 123; printf("My int64: %" PRId64"\n", i64); }
In this case, "PRId64" is treated as a separate preprocessing token.
Additionally, warn when a user-defined literal operator is declared with a literal suffix identifier that doesn't begin with an underscore. Literal suffix identifiers that don't begin with an underscore are reserved for future standardization.
This warning is enabled by default.
- -Wlto-type-mismatch
- During the link-time optimization warn about type mismatches in global declarations from different compilation units. Requires -flto to be enabled. Enabled by default.
- -Wno-narrowing (C++and Objective-C++only)
-
For C++11 and later standards, narrowing conversions are diagnosed by default, as required by the standard. A narrowing conversion from a constant produces an error, and a narrowing conversion from a non-constant produces a warning, but -Wno-narrowing suppresses the diagnostic. Note that this does not affect the meaning of well-formed code; narrowing conversions are still considered ill-formed inSFINAEcontexts.
With -Wnarrowing in C
++98, warn when a narrowing conversion prohibited by C++11 occurs within { }, e.g.int i = { 2.2 }; // error: narrowing from double to int
This flag is included in -Wall and -Wc++11-compat.
- -Wnoexcept (C++and Objective-C++only)
- Warn when a noexcept-expression evaluates to false because of a call to a function that does not have a non-throwing exception specification (i.e. "throw()" or "noexcept") but is known by the compiler to never throw an exception.
- -Wnoexcept-type (C++and Objective-C++only)
-
Warn if the C++1z feature making "noexcept" part of a function type changes the mangled name of a symbol relative to C++14. Enabled by -Wabi and -Wc++1z-compat.
template <class T> void f(T t) { t(); }; void g() noexcept; void h() { f(g); } // in C++14 calls f<void(*)()>, in C++1z calls f<void(*)()noexcept>
- -Wnon-virtual-dtor (C++and Objective-C++only)
- Warn when a class has virtual functions and an accessible non-virtual destructor itself or in an accessible polymorphic base class, in which case it is possible but unsafe to delete an instance of a derived class through a pointer to the class itself or base class. This warning is automatically enabled if -Weffc++ is specified.
- -Wregister (C++and Objective-C++only)
-
Warn on uses of the "register" storage class specifier, except
when it is part of the GNUExplicit Register Variables extension. The use of the "register" keyword as storage class specifier has been deprecated in C++11 and removed in C++17. Enabled by default with -std=c++1z.
- -Wreorder (C++and Objective-C++only)
-
Warn when the order of member initializers given in the code does not
match the order in which they must be executed. For instance:
struct A { int i; int j; A(): j (0), i (1) { } };
The compiler rearranges the member initializers for "i" and "j" to match the declaration order of the members, emitting a warning to that effect. This warning is enabled by -Wall.
- -fext-numeric-literals (C++and Objective-C++only)
-
Accept imaginary, fixed-point, or machine-defined
literal number suffixes as GNUextensions. When this option is turned off these suffixes are treated as C++11 user-defined literal numeric suffixes. This is on by default for all pre-C++11 dialects and allGNUdialects: -std=c++98, -std=gnu++98, -std=gnu++11, -std=gnu++14. This option is off by default forISO Conwards (-std=c++11, ...).++11
The following -W... options are not affected by -Wall.
- -Weffc++ (C++and Objective-C++only)
-
Warn about violations of the following style guidelines from Scott Meyers'
Effective C++series of books:
-
- *
- Define a copy constructor and an assignment operator for classes with dynamically-allocated memory.
- *
- Prefer initialization to assignment in constructors.
- *
- Have "operator=" return a reference to *this.
- *
- Don't try to return a reference when you must return an object.
- *
- Distinguish between prefix and postfix forms of increment and decrement operators.
- *
- Never overload "&&", "||", or ",".
-
This option also enables -Wnon-virtual-dtor, which is also one of the effective C
++recommendations. However, the check is extended to warn about the lack of virtual destructor in accessible non-polymorphic bases classes too.When selecting this option, be aware that the standard library headers do not obey all of these guidelines; use grep -v to filter out those warnings.
-
- -Wstrict-null-sentinel (C++and Objective-C++only)
-
Warn about the use of an uncasted "NULL" as sentinel. When
compiling only with GCCthis is a valid sentinel, as "NULL" is defined to "__null". Although it is a null pointer constant rather than a null pointer, it is guaranteed to be of the same size as a pointer. But this use is not portable across different compilers.
- -Wno-non-template-friend (C++and Objective-C++only)
-
Disable warnings when non-template friend functions are declared
within a template. In very old versions of GCCthat predate implementation of theISOstandard, declarations such as friend int foo(int), where the name of the friend is an unqualified-id, could be interpreted as a particular specialization of a template function; the warning exists to diagnose compatibility problems, and is enabled by default.
- -Wold-style-cast (C++and Objective-C++only)
-
Warn if an old-style (C-style) cast to a non-void type is used within
a C++program. The new-style casts ("dynamic_cast", "static_cast", "reinterpret_cast", and "const_cast") are less vulnerable to unintended effects and much easier to search for.
- -Woverloaded-virtual (C++and Objective-C++only)
-
Warn when a function declaration hides virtual functions from a
base class. For example, in:
struct A { virtual void f(); }; struct B: public A { void f(int); };
the "A" class version of "f" is hidden in "B", and code like:
B* b; b->f();
fails to compile.
- -Wno-pmf-conversions (C++and Objective-C++only)
- Disable the diagnostic for converting a bound pointer to member function to a plain pointer.
- -Wsign-promo (C++and Objective-C++only)
- Warn when overload resolution chooses a promotion from unsigned or enumerated type to a signed type, over a conversion to an unsigned type of the same size. Previous versions of G++ tried to preserve unsignedness, but the standard mandates the current behavior.
- -Wtemplates (C++and Objective-C++only)
-
Warn when a primary template declaration is encountered. Some coding
rules disallow templates, and this may be used to enforce that rule.
The warning is inactive inside a system header file, such as the STL,so one can still use theSTL.One may also instantiate or specialize templates.
- -Wmultiple-inheritance (C++and Objective-C++only)
-
Warn when a class is defined with multiple direct base classes. Some
coding rules disallow multiple inheritance, and this may be used to
enforce that rule. The warning is inactive inside a system header file,
such as the STL,so one can still use theSTL.One may also define classes that indirectly use multiple inheritance.
- -Wvirtual-inheritance
-
Warn when a class is defined with a virtual direct base class. Some
coding rules disallow multiple inheritance, and this may be used to
enforce that rule. The warning is inactive inside a system header file,
such as the STL,so one can still use theSTL.One may also define classes that indirectly use virtual inheritance.
- -Wnamespaces
-
Warn when a namespace definition is opened. Some coding rules disallow
namespaces, and this may be used to enforce that rule. The warning is
inactive inside a system header file, such as the STL,so one can still use theSTL.One may also use using directives and qualified names.
- -Wno-terminate (C++and Objective-C++only)
- Disable the warning about a throw-expression that will immediately result in a call to "terminate".
Options Controlling Objective-C and Objective-C++ Dialects
(This section describes the command-line options that are only meaningful for Objective-C and Objective-C
gcc -g -fgnu-runtime -O -c some_class.m
In this example, -fgnu-runtime is an option meant only for Objective-C and Objective-C
Note that since Objective-C is an extension of the C language, Objective-C compilations may also use options specific to the C front-end (e.g., -Wtraditional). Similarly, Objective-C
Here is a list of options that are only for compiling Objective-C and Objective-C
- -fconstant-string-class=class-name
-
Use class-name as the name of the class to instantiate for each
literal string specified with the syntax "@"..."". The default
class name is "NXConstantString" if the GNUruntime is being used, and "NSConstantString" if the NeXT runtime is being used (see below). The -fconstant-cfstrings option, if also present, overrides the -fconstant-string-class setting and cause "@"..."" literals to be laid out as constant CoreFoundation strings.
- -fgnu-runtime
-
Generate object code compatible with the standard GNUObjective-C runtime. This is the default for most types of systems.
- -fnext-runtime
-
Generate output compatible with the NeXT runtime. This is the default
for NeXT-based systems, including Darwin and Mac OS X.The macro "__NEXT_RUNTIME__" is predefined if (and only if) this option is used.
- -fno-nil-receivers
-
Assume that all Objective-C message dispatches ("[receiver
message:arg]") in this translation unit ensure that the receiver is
not "nil". This allows for more efficient entry points in the
runtime to be used. This option is only available in conjunction with
the NeXT runtime and ABIversion 0 or 1.
- -fobjc-abi-version=n
-
Use version n of the Objective-C ABIfor the selected runtime. This option is currently supported only for the NeXT runtime. In that case, Version 0 is the traditional (32-bit)ABIwithout support for properties and other Objective-C 2.0 additions. Version 1 is the traditional (32-bit)ABIwith support for properties and other Objective-C 2.0 additions. Version 2 is the modern (64-bit)ABI.If nothing is specified, the default is Version 0 on 32-bit target machines, and Version 2 on 64-bit target machines.
- -fobjc-call-cxx-cdtors
-
For each Objective-C class, check if any of its instance variables is a
C++object with a non-trivial default constructor. If so, synthesize a special "- (id) .cxx_construct" instance method which runs non-trivial default constructors on any such instance variables, in order, and then return "self". Similarly, check if any instance variable is a C++object with a non-trivial destructor, and if so, synthesize a special "- (void) .cxx_destruct" method which runs all such default destructors, in reverse order.
The "- (id) .cxx_construct" and "- (void) .cxx_destruct" methods thusly generated only operate on instance variables declared in the current Objective-C class, and not those inherited from superclasses. It is the responsibility of the Objective-C runtime to invoke all such methods in an object's inheritance hierarchy. The "- (id) .cxx_construct" methods are invoked by the runtime immediately after a new object instance is allocated; the "- (void) .cxx_destruct" methods are invoked immediately before the runtime deallocates an object instance.
As of this writing, only the NeXT runtime on Mac
OS X 10.4and later has support for invoking the "- (id) .cxx_construct" and "- (void) .cxx_destruct" methods. - -fobjc-direct-dispatch
- Allow fast jumps to the message dispatcher. On Darwin this is accomplished via the comm page.
- -fobjc-exceptions
-
Enable syntactic support for structured exception handling in
Objective-C, similar to what is offered by C++. This option is required to use the Objective-C keywords @try, @throw, @catch, @finally and @synchronized. This option is available with both theGNUruntime and the NeXT runtime (but not available in conjunction with the NeXT runtime on MacOS X 10.2and earlier).
- -fobjc-gc
-
Enable garbage collection (GC) in Objective-C and Objective-C++programs. This option is only available with the NeXT runtime; theGNUruntime has a different garbage collection implementation that does not require special compiler flags.
- -fobjc-nilcheck
-
For the NeXT runtime with version 2 of the ABI,check for a nil receiver in method invocations before doing the actual method call. This is the default and can be disabled using -fno-objc-nilcheck. Class methods and super calls are never checked for nil in this way no matter what this flag is set to. Currently this flag does nothing when theGNUruntime, or an older version of the NeXT runtimeABI,is used.
- -fobjc-std=objc1
-
Conform to the language syntax of Objective-C 1.0, the language
recognized by GCC 4.0.This only affects the Objective-C additions to the C/C++language; it does not affect conformance to C/C++standards, which is controlled by the separate C/C++dialect option flags. When this option is used with the Objective-C or Objective-C++compiler, any Objective-C syntax that is not recognized byGCC 4.0is rejected. This is useful if you need to make sure that your Objective-C code can be compiled with older versions ofGCC.
- -freplace-objc-classes
-
Emit a special marker instructing ld(1) not to statically link in
the resulting object file, and allow dyld(1) to load it in at
run time instead. This is used in conjunction with the Fix-and-Continue
debugging mode, where the object file in question may be recompiled and
dynamically reloaded in the course of program execution, without the need
to restart the program itself. Currently, Fix-and-Continue functionality
is only available in conjunction with the NeXT runtime on Mac OS X 10.3and later.
- -fzero-link
-
When compiling for the NeXT runtime, the compiler ordinarily replaces calls
to "objc_getClass("...")" (when the name of the class is known at
compile time) with static class references that get initialized at load time,
which improves run-time performance. Specifying the -fzero-link flag
suppresses this behavior and causes calls to "objc_getClass("...")"
to be retained. This is useful in Zero-Link debugging mode, since it allows
for individual class implementations to be modified during program execution.
The GNUruntime currently always retains calls to "objc_get_class("...")" regardless of command-line options.
- -fno-local-ivars
- By default instance variables in Objective-C can be accessed as if they were local variables from within the methods of the class they're declared in. This can lead to shadowing between instance variables and other variables declared either locally inside a class method or globally with the same name. Specifying the -fno-local-ivars flag disables this behavior thus avoiding variable shadowing issues.
- -fivar-visibility=[public|protected|private|package]
- Set the default instance variable visibility to the specified option so that instance variables declared outside the scope of any access modifier directives default to the specified visibility.
- -gen-decls
- Dump interface declarations for all classes seen in the source file to a file named sourcename.decl.
- -Wassign-intercept (Objective-C and Objective-C++only)
- Warn whenever an Objective-C assignment is being intercepted by the garbage collector.
- -Wno-protocol (Objective-C and Objective-C++only)
- If a class is declared to implement a protocol, a warning is issued for every method in the protocol that is not implemented by the class. The default behavior is to issue a warning for every method not explicitly implemented in the class, even if a method implementation is inherited from the superclass. If you use the -Wno-protocol option, then methods inherited from the superclass are considered to be implemented, and no warning is issued for them.
- -Wselector (Objective-C and Objective-C++only)
- Warn if multiple methods of different types for the same selector are found during compilation. The check is performed on the list of methods in the final stage of compilation. Additionally, a check is performed for each selector appearing in a "@selector(...)" expression, and a corresponding method for that selector has been found during compilation. Because these checks scan the method table only at the end of compilation, these warnings are not produced if the final stage of compilation is not reached, for example because an error is found during compilation, or because the -fsyntax-only option is being used.
- -Wstrict-selector-match (Objective-C and Objective-C++only)
- Warn if multiple methods with differing argument and/or return types are found for a given selector when attempting to send a message using this selector to a receiver of type "id" or "Class". When this flag is off (which is the default behavior), the compiler omits such warnings if any differences found are confined to types that share the same size and alignment.
- -Wundeclared-selector (Objective-C and Objective-C++only)
- Warn if a "@selector(...)" expression referring to an undeclared selector is found. A selector is considered undeclared if no method with that name has been declared before the "@selector(...)" expression, either explicitly in an @interface or @protocol declaration, or implicitly in an @implementation section. This option always performs its checks as soon as a "@selector(...)" expression is found, while -Wselector only performs its checks in the final stage of compilation. This also enforces the coding style convention that methods and selectors must be declared before being used.
- -print-objc-runtime-info
- Generate C header describing the largest structure that is passed by value, if any.
Options to Control Diagnostic Messages Formatting
Traditionally, diagnostic messages have been formatted irrespective of the output device's aspect (e.g. its width, ...). You can use the options described below to control the formatting algorithm for diagnostic messages, e.g. how many characters per line, how often source location information should be reported. Note that some language front ends may not honor these options.- -fmessage-length=n
- Try to format error messages so that they fit on lines of about n characters. If n is zero, then no line-wrapping is done; each error message appears on a single line. This is the default for all front ends.
- -fdiagnostics-show-location=once
- Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit source location information once; that is, in case the message is too long to fit on a single physical line and has to be wrapped, the source location won't be emitted (as prefix) again, over and over, in subsequent continuation lines. This is the default behavior.
- -fdiagnostics-show-location=every-line
- Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit the same source location information (as prefix) for physical lines that result from the process of breaking a message which is too long to fit on a single line.
- -fdiagnostics-color[=WHEN]
- -fno-diagnostics-color
-
Use color in diagnostics. WHENis never, always, or auto. The default depends on how the compiler has been configured, it can be any of the aboveWHENoptions or also never ifGCC_COLORSenvironment variable isn't present in the environment, and auto otherwise. auto means to use color only when the standard error is a terminal. The forms -fdiagnostics-color and -fno-diagnostics-color are aliases for -fdiagnostics-color=always and -fdiagnostics-color=never, respectively.
The colors are defined by the environment variable
GCC_COLORS. Its value is a colon-separated list of capabilities and Select Graphic Rendition (SGR) substrings.SGRcommands are interpreted by the terminal or terminal emulator. (See the section in the documentation of your text terminal for permitted values and their meanings as character attributes.) These substring values are integers in decimal representation and can be concatenated with semicolons. Common values to concatenate include 1 for bold, 4 for underline, 5 for blink, 7 for inverse, 39 for default foreground color, 30 to 37 for foreground colors, 90 to 97 for 16-color mode foreground colors, 38;5;0 to 38;5;255 for 88-color and 256-color modes foreground colors, 49 for default background color, 40 to 47 for background colors, 100 to 107 for 16-color mode background colors, and 48;5;0 to 48;5;255 for 88-color and 256-color modes background colors.The default
GCC_COLORSiserror=01;31:warning=01;35:note=01;36:range1=32:range2=34:locus=01:\ quote=01:fixit-insert=32:fixit-delete=31:\ diff-filename=01:diff-hunk=32:diff-delete=31:diff-insert=32
where 01;31 is bold red, 01;35 is bold magenta, 01;36 is bold cyan, 32 is green, 34 is blue, 01 is bold, and 31 is red. Setting
GCC_COLORSto the empty string disables colors. Supported capabilities are as follows.-
- error=
-
SGRsubstring for error: markers.
- warning=
-
SGRsubstring for warning: markers.
- note=
-
SGRsubstring for note: markers.
- range1=
-
SGRsubstring for first additional range.
- range2=
-
SGRsubstring for second additional range.
- locus=
-
SGRsubstring for location information, file:line or file:line:column etc.
- quote=
-
SGRsubstring for information printed within quotes.
- fixit-insert=
-
SGRsubstring for fix-it hints suggesting text to be inserted or replaced.
- fixit-delete=
-
SGRsubstring for fix-it hints suggesting text to be deleted.
- diff-filename=
-
SGRsubstring for filename headers within generated patches.
- diff-hunk=
-
SGRsubstring for the starts of hunks within generated patches.
- diff-delete=
-
SGRsubstring for deleted lines within generated patches.
- diff-insert=
-
SGRsubstring for inserted lines within generated patches.
-
- -fno-diagnostics-show-option
- By default, each diagnostic emitted includes text indicating the command-line option that directly controls the diagnostic (if such an option is known to the diagnostic machinery). Specifying the -fno-diagnostics-show-option flag suppresses that behavior.
- -fno-diagnostics-show-caret
-
By default, each diagnostic emitted includes the original source line
and a caret ^ indicating the column. This option suppresses this
information. The source line is truncated to n characters, if
the -fmessage-length=n option is given. When the output is done
to the terminal, the width is limited to the width given by the
COLUMNSenvironment variable or, if not set, to the terminal width.
- -fdiagnostics-parseable-fixits
-
Emit fix-it hints in a machine-parseable format, suitable for consumption
by IDEs. For each fix-it, a line will be printed after the relevant
diagnostic, starting with the string ``fix-it:''. For example:
fix-it:"test.c":{45:3-45:21}:"gtk_widget_show_all"
The location is expressed as a half-open range, expressed as a count of bytes, starting at byte 1 for the initial column. In the above example, bytes 3 through 20 of line 45 of ``test.c'' are to be replaced with the given string:
00000000011111111112222222222 12345678901234567890123456789 gtk_widget_showall (dlg); ^^^^^^^^^^^^^^^^^^ gtk_widget_show_all
The filename and replacement string escape backslash as ``\\'', tab as ``\t'', newline as ``\n'', double quotes as ``\''``, non-printable characters as octal (e.g. vertical tab as ''\013").
An empty replacement string indicates that the given range is to be removed. An empty range (e.g. ``45:3-45:3'') indicates that the string is to be inserted at the given position.
- -fdiagnostics-generate-patch
-
Print fix-it hints to stderr in unified diff format, after any diagnostics
are printed. For example:
--- test.c +++ test.c @ -42,5 +42,5 @ void show_cb(GtkDialog *dlg) { - gtk_widget_showall(dlg); + gtk_widget_show_all(dlg); }
The diff may or may not be colorized, following the same rules as for diagnostics (see -fdiagnostics-color).
- -fno-show-column
- Do not print column numbers in diagnostics. This may be necessary if diagnostics are being scanned by a program that does not understand the column numbers, such as dejagnu.
Options to Request or Suppress Warnings
Warnings are diagnostic messages that report constructions that are not inherently erroneous but that are risky or suggest there may have been an error.The following language-independent options do not enable specific warnings but control the kinds of diagnostics produced by
- -fsyntax-only
- Check the code for syntax errors, but don't do anything beyond that.
- -fmax-errors=n
-
Limits the maximum number of error messages to n, at which point
GCCbails out rather than attempting to continue processing the source code. If n is 0 (the default), there is no limit on the number of error messages produced. If -Wfatal-errors is also specified, then -Wfatal-errors takes precedence over this option.
- -w
- Inhibit all warning messages.
- -Werror
- Make all warnings into errors.
- -Werror=
-
Make the specified warning into an error. The specifier for a warning
is appended; for example -Werror=switch turns the warnings
controlled by -Wswitch into errors. This switch takes a
negative form, to be used to negate -Werror for specific
warnings; for example -Wno-error=switch makes
-Wswitch warnings not be errors, even when -Werror
is in effect.
The warning message for each controllable warning includes the option that controls the warning. That option can then be used with -Werror= and -Wno-error= as described above. (Printing of the option in the warning message can be disabled using the -fno-diagnostics-show-option flag.)
Note that specifying -Werror=foo automatically implies -Wfoo. However, -Wno-error=foo does not imply anything.
- -Wfatal-errors
- This option causes the compiler to abort compilation on the first error occurred rather than trying to keep going and printing further error messages.
You can request many specific warnings with options beginning with
-W, for example -Wimplicit to request warnings on
implicit declarations. Each of these specific warning options also
has a negative form beginning -Wno- to turn off warnings; for
example, -Wno-implicit. This manual lists only one of the
two forms, whichever is not the default. For further
language-specific options also refer to C
Some options, such as -Wall and -Wextra, turn on other options, such as -Wunused, which may turn on further options, such as -Wunused-value. The combined effect of positive and negative forms is that more specific options have priority over less specific ones, independently of their position in the command-line. For options of the same specificity, the last one takes effect. Options enabled or disabled via pragmas take effect as if they appeared at the end of the command-line.
When an unrecognized warning option is requested (e.g., -Wunknown-warning),
- -Wpedantic
- -pedantic
-
Issue all the warnings demanded by strict ISO CandISO C; reject all programs that use forbidden extensions, and some other programs that do not follow++ISO CandISO CFor++.ISO C,follows the version of theISO Cstandard specified by any -std option used.
Valid
ISO CandISO Cprograms should compile properly with or without this option (though a rare few require -ansi or a -std option specifying the required version of++ISO C). However, without this option, certainGNUextensions and traditional C and C++features are supported as well. With this option, they are rejected.-Wpedantic does not cause warning messages for use of the alternate keywords whose names begin and end with __. Pedantic warnings are also disabled in the expression that follows "__extension__". However, only system header files should use these escape routes; application programs should avoid them.
Some users try to use -Wpedantic to check programs for strict
ISO Cconformance. They soon find that it does not do quite what they want: it finds some non-ISO practices, but not all---only those for whichISO Crequires a diagnostic, and some others for which diagnostics have been added.A feature to report any failure to conform to
ISO Cmight be useful in some instances, but would require considerable additional work and would be quite different from -Wpedantic. We don't have plans to support such a feature in the near future.Where the standard specified with -std represents a
GNUextended dialect of C, such as gnu90 or gnu99, there is a corresponding base standard, the version ofISO Con which theGNUextended dialect is based. Warnings from -Wpedantic are given where they are required by the base standard. (It does not make sense for such warnings to be given only for features not in the specifiedGNU Cdialect, since by definition theGNUdialects of C include all features the compiler supports with the given option, and there would be nothing to warn about.) - -pedantic-errors
- Give an error whenever the base standard (see -Wpedantic) requires a diagnostic, in some cases where there is undefined behavior at compile-time and in some other cases that do not prevent compilation of programs that are valid according to the standard. This is not equivalent to -Werror=pedantic, since there are errors enabled by this option and not enabled by the latter and vice versa.
- -Wall
-
This enables all the warnings about constructions that some users
consider questionable, and that are easy to avoid (or modify to
prevent the warning), even in conjunction with macros. This also
enables some language-specific warnings described in C++Dialect Options and Objective-C and Objective-C++Dialect Options.
-Wall turns on the following warning flags:
-Waddress -Warray-bounds=1 (only with -O2) -Wbool-compare -Wbool-operation -Wc++11-compat -Wc++14-compat -Wchar-subscripts -Wcomment -Wduplicate-decl-specifier (C and Objective-C only) -Wenum-compare (in C/ObjC; this is on by default in C
++) -Wformat -Wint-in-bool-context -Wimplicit (C and Objective-C only) -Wimplicit-int (C and Objective-C only) -Wimplicit-function-declaration (C and Objective-C only) -Winit-self (only for C++) -Wlogical-not-parentheses -Wmain (only for C/ObjC and unless -ffreestanding) -Wmaybe-uninitialized -Wmemset-elt-size -Wmemset-transposed-args -Wmisleading-indentation (only for C/C++) -Wmissing-braces (only for C/ObjC) -Wnarrowing (only for C++) -Wnonnull -Wnonnull-compare -Wopenmp-simd -Wparentheses -Wpointer-sign -Wreorder -Wreturn-type -Wsequence-point -Wsign-compare (only in C++) -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-overflow=1 -Wswitch -Wtautological-compare -Wtrigraphs -Wuninitialized -Wunknown-pragmas -Wunused-function -Wunused-label -Wunused-value -Wunused-variable -Wvolatile-register-varNote that some warning flags are not implied by -Wall. Some of them warn about constructions that users generally do not consider questionable, but which occasionally you might wish to check for; others warn about constructions that are necessary or hard to avoid in some cases, and there is no simple way to modify the code to suppress the warning. Some of them are enabled by -Wextra but many of them must be enabled individually.
- -Wextra
-
This enables some extra warning flags that are not enabled by
-Wall. (This option used to be called -W. The older
name is still supported, but the newer name is more descriptive.)
-Wclobbered -Wempty-body -Wignored-qualifiers -Wimplicit-fallthrough=3 -Wmissing-field-initializers -Wmissing-parameter-type (C only) -Wold-style-declaration (C only) -Woverride-init -Wsign-compare (C only) -Wtype-limits -Wuninitialized -Wshift-negative-value (in C
++03 and in C99 and newer) -Wunused-parameter (only with -Wunused or -Wall) -Wunused-but-set-parameter (only with -Wunused or -Wall)The option -Wextra also prints warning messages for the following cases:
-
- *
- A pointer is compared against integer zero with "<", "<=", ">", or ">=".
- *
-
(C++only) An enumerator and a non-enumerator both appear in a conditional expression.
- *
-
(C++only) Ambiguous virtual bases.
- *
-
(C++only) Subscripting an array that has been declared "register".
- *
-
(C++only) Taking the address of a variable that has been declared "register".
- *
-
(C++only) A base class is not initialized in the copy constructor of a derived class.
-
- -Wchar-subscripts
- Warn if an array subscript has type "char". This is a common cause of error, as programmers often forget that this type is signed on some machines. This warning is enabled by -Wall.
- -Wchkp
- Warn about an invalid memory access that is found by Pointer Bounds Checker (-fcheck-pointer-bounds).
- -Wno-coverage-mismatch
-
Warn if feedback profiles do not match when using the
-fprofile-use option.
If a source file is changed between compiling with -fprofile-gen and
with -fprofile-use, the files with the profile feedback can fail
to match the source file and GCCcannot use the profile feedback information. By default, this warning is enabled and is treated as an error. -Wno-coverage-mismatch can be used to disable the warning or -Wno-error=coverage-mismatch can be used to disable the error. Disabling the error for this warning can result in poorly optimized code and is useful only in the case of very minor changes such as bug fixes to an existing code-base. Completely disabling the warning is not recommended.
- -Wno-cpp
-
(C, Objective-C, C++, Objective-C++and Fortran only)
Suppress warning messages emitted by "#warning" directives.
- -Wdouble-promotion (C, C++, Objective-C and Objective-C++only)
-
Give a warning when a value of type "float" is implicitly
promoted to "double". CPUs with a 32-bit ``single-precision''
floating-point unit implement "float" in hardware, but emulate
"double" in software. On such a machine, doing computations
using "double" values is much more expensive because of the
overhead required for software emulation.
It is easy to accidentally do computations with "double" because floating-point literals are implicitly of type "double". For example, in:
float area(float radius) { return 3.14159 * radius * radius; }
the compiler performs the entire computation with "double" because the floating-point literal is a "double".
- -Wduplicate-decl-specifier (C and Objective-C only)
- Warn if a declaration has duplicate "const", "volatile", "restrict" or "_Atomic" specifier. This warning is enabled by -Wall.
- -Wformat
- -Wformat=n
-
Check calls to "printf" and "scanf", etc., to make sure that
the arguments supplied have types appropriate to the format string
specified, and that the conversions specified in the format string make
sense. This includes standard functions, and others specified by format
attributes, in the "printf",
"scanf", "strftime" and "strfmon" (an X/Open extension,
not in the C standard) families (or other target-specific families).
Which functions are checked without format attributes having been
specified depends on the standard version selected, and such checks of
functions without the attribute specified are disabled by
-ffreestanding or -fno-builtin.
The formats are checked against the format features supported by
GNUlibc version 2.2. These include allISO C90and C99 features, as well as features from the Single Unix Specification and someBSDandGNUextensions. Other library implementations may not support all these features;GCCdoes not support warning about features that go beyond a particular library's limitations. However, if -Wpedantic is used with -Wformat, warnings are given about format features not in the selected standard version (but not for "strfmon" formats, since those are not in any version of the C standard).-
- -Wformat=1
- -Wformat
- Option -Wformat is equivalent to -Wformat=1, and -Wno-format is equivalent to -Wformat=0. Since -Wformat also checks for null format arguments for several functions, -Wformat also implies -Wnonnull. Some aspects of this level of format checking can be disabled by the options: -Wno-format-contains-nul, -Wno-format-extra-args, and -Wno-format-zero-length. -Wformat is enabled by -Wall.
- -Wno-format-contains-nul
-
If -Wformat is specified, do not warn about format strings that
contain NULbytes.
- -Wno-format-extra-args
-
If -Wformat is specified, do not warn about excess arguments to a
"printf" or "scanf" format function. The C standard specifies
that such arguments are ignored.
Where the unused arguments lie between used arguments that are specified with $ operand number specifications, normally warnings are still given, since the implementation could not know what type to pass to "va_arg" to skip the unused arguments. However, in the case of "scanf" formats, this option suppresses the warning if the unused arguments are all pointers, since the Single Unix Specification says that such unused arguments are allowed.
- -Wformat-overflow
- -Wformat-overflow=level
-
Warn about calls to formatted input/output functions such as "sprintf"
and "vsprintf" that might overflow the destination buffer. When the
exact number of bytes written by a format directive cannot be determined
at compile-time it is estimated based on heuristics that depend on the
level argument and on optimization. While enabling optimization
will in most cases improve the accuracy of the warning, it may also
result in false positives.
-
- -Wformat-overflow
- -Wformat-overflow=1
-
Level 1 of -Wformat-overflow enabled by -Wformat
employs a conservative approach that warns only about calls that most
likely overflow the buffer. At this level, numeric arguments to format
directives with unknown values are assumed to have the value of one, and
strings of unknown length to be empty. Numeric arguments that are known
to be bounded to a subrange of their type, or string arguments whose output
is bounded either by their directive's precision or by a finite set of
string literals, are assumed to take on the value within the range that
results in the most bytes on output. For example, the call to "sprintf"
below is diagnosed because even with both a and b equal to zero,
the terminating NULcharacter ('\0') appended by the function to the destination buffer will be written past its end. Increasing the size of the buffer by a single byte is sufficient to avoid the warning, though it may not be sufficient to avoid the overflow.
void f (int a, int b) { char buf [12]; sprintf (buf, "a = %i, b = %i\n", a, b); }
- -Wformat-overflow=2
-
Level 2 warns also about calls that might overflow the destination
buffer given an argument of sufficient length or magnitude. At level
2, unknown numeric arguments are assumed to have the minimum
representable value for signed types with a precision greater than 1, and
the maximum representable value otherwise. Unknown string arguments whose
length cannot be assumed to be bounded either by the directive's precision,
or by a finite set of string literals they may evaluate to, or the character
array they may point to, are assumed to be 1 character long.
At level 2, the call in the example above is again diagnosed, but this time because with a equal to a 32-bit "INT_MIN" the first %i directive will write some of its digits beyond the end of the destination buffer. To make the call safe regardless of the values of the two variables, the size of the destination buffer must be increased to at least 34 bytes.
GCCincludes the minimum size of the buffer in an informational note following the warning.An alternative to increasing the size of the destination buffer is to constrain the range of formatted values. The maximum length of string arguments can be bounded by specifying the precision in the format directive. When numeric arguments of format directives can be assumed to be bounded by less than the precision of their type, choosing an appropriate length modifier to the format specifier will reduce the required buffer size. For example, if a and b in the example above can be assumed to be within the precision of the "short int" type then using either the %hi format directive or casting the argument to "short" reduces the maximum required size of the buffer to 24 bytes.
void f (int a, int b) { char buf [23]; sprintf (buf, "a = %hi, b = %i\n", a, (short)b); }
-
- -Wno-format-zero-length
- If -Wformat is specified, do not warn about zero-length formats. The C standard specifies that zero-length formats are allowed.
- -Wformat=2
- Enable -Wformat plus additional format checks. Currently equivalent to -Wformat -Wformat-nonliteral -Wformat-security -Wformat-y2k.
- -Wformat-nonliteral
- If -Wformat is specified, also warn if the format string is not a string literal and so cannot be checked, unless the format function takes its format arguments as a "va_list".
- -Wformat-security
- If -Wformat is specified, also warn about uses of format functions that represent possible security problems. At present, this warns about calls to "printf" and "scanf" functions where the format string is not a string literal and there are no format arguments, as in "printf (foo);". This may be a security hole if the format string came from untrusted input and contains %n. (This is currently a subset of what -Wformat-nonliteral warns about, but in future warnings may be added to -Wformat-security that are not included in -Wformat-nonliteral.)
- -Wformat-signedness
- If -Wformat is specified, also warn if the format string requires an unsigned argument and the argument is signed and vice versa.
- -Wformat-truncation
- -Wformat-truncation=level
-
Warn about calls to formatted input/output functions such as "snprintf"
and "vsnprintf" that might result in output truncation. When the exact
number of bytes written by a format directive cannot be determined at
compile-time it is estimated based on heuristics that depend on
the level argument and on optimization. While enabling optimization
will in most cases improve the accuracy of the warning, it may also result
in false positives. Except as noted otherwise, the option uses the same
logic -Wformat-overflow.
-
- -Wformat-truncation
- -Wformat-truncation=1
- Level 1 of -Wformat-truncation enabled by -Wformat employs a conservative approach that warns only about calls to bounded functions whose return value is unused and that will most likely result in output truncation.
- -Wformat-truncation=2
- Level 2 warns also about calls to bounded functions whose return value is used and that might result in truncation given an argument of sufficient length or magnitude.
-
NOTE:In Ubuntu 8.10 and later versions this option is enabled by default for C, C++, ObjC, ObjC++. To disable, use -Wno-format-security, or disable all format warnings with -Wformat=0. To make format security warnings fatal, specify -Werror=format-security.
-
- -Wformat-y2k
- If -Wformat is specified, also warn about "strftime" formats that may yield only a two-digit year.
-
- -Wnonnull
-
Warn about passing a null pointer for arguments marked as
requiring a non-null value by the "nonnull" function attribute.
-Wnonnull is included in -Wall and -Wformat. It can be disabled with the -Wno-nonnull option.
- -Wnonnull-compare
-
Warn when comparing an argument marked with the "nonnull"
function attribute against null inside the function.
-Wnonnull-compare is included in -Wall. It can be disabled with the -Wno-nonnull-compare option.
- -Wnull-dereference
- Warn if the compiler detects paths that trigger erroneous or undefined behavior due to dereferencing a null pointer. This option is only active when -fdelete-null-pointer-checks is active, which is enabled by optimizations in most targets. The precision of the warnings depends on the optimization options used.
- -Winit-self (C, C++, Objective-C and Objective-C++only)
-
Warn about uninitialized variables that are initialized with themselves.
Note this option can only be used with the -Wuninitialized option.
For example,
GCCwarns about "i" being uninitialized in the following snippet only when -Winit-self has been specified:int f() { int i = i; return i; }
This warning is enabled by -Wall in C
++. - -Wimplicit-int (C and Objective-C only)
- Warn when a declaration does not specify a type. This warning is enabled by -Wall.
- -Wimplicit-function-declaration (C and Objective-C only)
- Give a warning whenever a function is used before being declared. In C99 mode (-std=c99 or -std=gnu99), this warning is enabled by default and it is made into an error by -pedantic-errors. This warning is also enabled by -Wall.
- -Wimplicit (C and Objective-C only)
- Same as -Wimplicit-int and -Wimplicit-function-declaration. This warning is enabled by -Wall.
- -Wimplicit-fallthrough
- -Wimplicit-fallthrough is the same as -Wimplicit-fallthrough=3 and -Wno-implicit-fallthrough is the same as -Wimplicit-fallthrough=0.
- -Wimplicit-fallthrough=n
-
Warn when a switch case falls through. For example:
switch (cond) { case 1: a = 1; break; case 2: a = 2; case 3: a = 3; break; }
This warning does not warn when the last statement of a case cannot fall through, e.g. when there is a return statement or a call to function declared with the noreturn attribute. -Wimplicit-fallthrough= also takes into account control flow statements, such as ifs, and only warns when appropriate. E.g.
switch (cond) { case 1: if (i > 3) { bar (5); break; } else if (i < 1) { bar (0); } else return; default: ... }
Since there are occasions where a switch case fall through is desirable,
GCCprovides an attribute, "__attribute__ ((fallthrough))", that is to be used along with a null statement to suppress this warning that would normally occur:switch (cond) { case 1: bar (0); __attribute__ ((fallthrough)); default: ... }
C
++17 provides a standard way to suppress the -Wimplicit-fallthrough warning using "[[fallthrough]];" instead of theGNUattribute. In C++11 or C++14 users can use "[[gnu::fallthrough]];", which is aGNUextension. Instead of the these attributes, it is also possible to add a fallthrough comment to silence the warning. The whole body of the C or C++style comment should match the given regular expressions listed below. The option argument n specifies what kind of comments are accepted:-
- *<-Wimplicit-fallthrough=0 disables the warning altogether.>
- *<-Wimplicit-fallthrough=1 matches .* regular>
- expression, any comment is used as fallthrough comment.
- *<-Wimplicit-fallthrough=2 case insensitively matches>
- ".*falls?[ \t-]*thr(ough|u).*" regular expression.
- *<-Wimplicit-fallthrough=3 case sensitively matches one of the>
-
following regular expressions:
-
- *<-fallthrough>
- *<@fallthrough@>
- *<lint -fallthrough[ \t]*>
- *<[ \t.!]*(ELSE,? |INTENTIONAL(LY)? )?FALL(S | |-)?THR(OUGH|U)[ \t.!]*(-[^\n\r]*)?>
- *<[ \t.!]*(Else,? |Intentional(ly)? )?Fall((s | |-)[Tt]|t)hr(ough|u)[ \t.!]*(-[^\n\r]*)?>
- *<[ \t.!]*([Ee]lse,? |[Ii]ntentional(ly)? )?fall(s | |-)?thr(ough|u)[ \t.!]*(-[^\n\r]*)?>
-
- *<-Wimplicit-fallthrough=4 case sensitively matches one of the>
-
following regular expressions:
-
- *<-fallthrough>
- *<@fallthrough@>
- *<lint -fallthrough[ \t]*>
- *<[ \t]*FALLTHR(OUGH|U)[ \t]*>
-
- *<-Wimplicit-fallthrough=5 doesn't recognize any comments as>
- fallthrough comments, only attributes disable the warning.
-
The comment needs to be followed after optional whitespace and other comments by "case" or "default" keywords or by a user label that precedes some "case" or "default" label.
switch (cond) { case 1: bar (0); /* FALLTHRU */ default: ... }
The -Wimplicit-fallthrough=3 warning is enabled by -Wextra.
-
- -Wignored-qualifiers (C and C++only)
-
Warn if the return type of a function has a type qualifier
such as "const". For ISO Csuch a type qualifier has no effect, since the value returned by a function is not an lvalue. For C++, the warning is only emitted for scalar types or "void".ISO Cprohibits qualified "void" return types on function definitions, so such return types always receive a warning even without this option.
This warning is also enabled by -Wextra.
- -Wignored-attributes (C and C++only)
- Warn when an attribute is ignored. This is different from the -Wattributes option in that it warns whenever the compiler decides to drop an attribute, not that the attribute is either unknown, used in a wrong place, etc. This warning is enabled by default.
- -Wmain
-
Warn if the type of "main" is suspicious. "main" should be
a function with external linkage, returning int, taking either zero
arguments, two, or three arguments of appropriate types. This warning
is enabled by default in C++and is enabled by either -Wall or -Wpedantic.
- -Wmisleading-indentation (C and C++only)
-
Warn when the indentation of the code does not reflect the block structure.
Specifically, a warning is issued for "if", "else", "while", and
"for" clauses with a guarded statement that does not use braces,
followed by an unguarded statement with the same indentation.
In the following example, the call to ``bar'' is misleadingly indented as if it were guarded by the ``if'' conditional.
if (some_condition ()) foo (); bar (); /* Gotcha: this is not guarded by the "if". */
In the case of mixed tabs and spaces, the warning uses the -ftabstop= option to determine if the statements line up (defaulting to 8).
The warning is not issued for code involving multiline preprocessor logic such as the following example.
if (flagA) foo (0); #if SOME_CONDITION_THAT_DOES_NOT_HOLD if (flagB) #endif foo (1);
The warning is not issued after a "#line" directive, since this typically indicates autogenerated code, and no assumptions can be made about the layout of the file that the directive references.
This warning is enabled by -Wall in C and C
++. - -Wmissing-braces
-
Warn if an aggregate or union initializer is not fully bracketed. In
the following example, the initializer for "a" is not fully
bracketed, but that for "b" is fully bracketed. This warning is
enabled by -Wall in C.
int a[2][2] = { 0, 1, 2, 3 }; int b[2][2] = { { 0, 1 }, { 2, 3 } };
This warning is enabled by -Wall.
- -Wmissing-include-dirs (C, C++, Objective-C and Objective-C++only)
- Warn if a user-supplied include directory does not exist.
- -Wparentheses
-
Warn if parentheses are omitted in certain contexts, such
as when there is an assignment in a context where a truth value
is expected, or when operators are nested whose precedence people
often get confused about.
Also warn if a comparison like "x<=y<=z" appears; this is equivalent to "(x<=y ? 1 : 0) <= z", which is a different interpretation from that of ordinary mathematical notation.
Also warn for dangerous uses of the
GNUextension to "?:" with omitted middle operand. When the condition in the "?": operator is a boolean expression, the omitted value is always 1. Often programmers expect it to be a value computed inside the conditional expression instead.This warning is enabled by -Wall.
- -Wsequence-point
-
Warn about code that may have undefined semantics because of violations
of sequence point rules in the C and C++standards.
The C and C
++standards define the order in which expressions in a C/C++program are evaluated in terms of sequence points, which represent a partial ordering between the execution of parts of the program: those executed before the sequence point, and those executed after it. These occur after the evaluation of a full expression (one which is not part of a larger expression), after the evaluation of the first operand of a "&&", "||", "? :" or "," (comma) operator, before a function is called (but after the evaluation of its arguments and the expression denoting the called function), and in certain other places. Other than as expressed by the sequence point rules, the order of evaluation of subexpressions of an expression is not specified. All these rules describe only a partial order rather than a total order, since, for example, if two functions are called within one expression with no sequence point between them, the order in which the functions are called is not specified. However, the standards committee have ruled that function calls do not overlap.It is not specified when between sequence points modifications to the values of objects take effect. Programs whose behavior depends on this have undefined behavior; the C and C
++standards specify that ``Between the previous and next sequence point an object shall have its stored value modified at most once by the evaluation of an expression. Furthermore, the prior value shall be read only to determine the value to be stored.''. If a program breaks these rules, the results on any particular implementation are entirely unpredictable.Examples of code with undefined behavior are "a = a++;", "a[n] = b[n++]" and "a[i++] = i;". Some more complicated cases are not diagnosed by this option, and it may give an occasional false positive result, but in general it has been found fairly effective at detecting this sort of problem in programs.
The C
++17 standard will define the order of evaluation of operands in more cases: in particular it requires that the right-hand side of an assignment be evaluated before the left-hand side, so the above examples are no longer undefined. But this warning will still warn about them, to help people avoid writing code that is undefined in C and earlier revisions of C++.The standard is worded confusingly, therefore there is some debate over the precise meaning of the sequence point rules in subtle cases. Links to discussions of the problem, including proposed formal definitions, may be found on the
GCCreadings page, at <gcc.gnu.org/readings.html>.This warning is enabled by -Wall for C and C
++. - -Wno-return-local-addr
-
Do not warn about returning a pointer (or in C++, a reference) to a variable that goes out of scope after the function returns.
- -Wreturn-type
-
Warn whenever a function is defined with a return type that defaults
to "int". Also warn about any "return" statement with no
return value in a function whose return type is not "void"
(falling off the end of the function body is considered returning
without a value).
For C only, warn about a "return" statement with an expression in a function whose return type is "void", unless the expression type is also "void". As a
GNUextension, the latter case is accepted without a warning unless -Wpedantic is used.For C
++, a function without return type always produces a diagnostic message, even when -Wno-return-type is specified. The only exceptions are "main" and functions defined in system headers.This warning is enabled by -Wall.
- -Wshift-count-negative
- Warn if shift count is negative. This warning is enabled by default.
- -Wshift-count-overflow
- Warn if shift count >= width of type. This warning is enabled by default.
- -Wshift-negative-value
-
Warn if left shifting a negative value. This warning is enabled by
-Wextra in C99 and C++11 modes (and newer).
- -Wshift-overflow
- -Wshift-overflow=n
-
Warn about left shift overflows. This warning is enabled by
default in C99 and C++11 modes (and newer).
-
- -Wshift-overflow=1
-
This is the warning level of -Wshift-overflow and is enabled
by default in C99 and C++11 modes (and newer). This warning level does not warn about left-shifting 1 into the sign bit. (However, in C, such an overflow is still rejected in contexts where an integer constant expression is required.)
- -Wshift-overflow=2
-
This warning level also warns about left-shifting 1 into the sign bit,
unless C++14 mode is active.
-
- -Wswitch
- Warn whenever a "switch" statement has an index of enumerated type and lacks a "case" for one or more of the named codes of that enumeration. (The presence of a "default" label prevents this warning.) "case" labels outside the enumeration range also provoke warnings when this option is used (even if there is a "default" label). This warning is enabled by -Wall.
- -Wswitch-default
- Warn whenever a "switch" statement does not have a "default" case.
- -Wswitch-enum
- Warn whenever a "switch" statement has an index of enumerated type and lacks a "case" for one or more of the named codes of that enumeration. "case" labels outside the enumeration range also provoke warnings when this option is used. The only difference between -Wswitch and this option is that this option gives a warning about an omitted enumeration code even if there is a "default" label.
- -Wswitch-bool
-
Warn whenever a "switch" statement has an index of boolean type
and the case values are outside the range of a boolean type.
It is possible to suppress this warning by casting the controlling
expression to a type other than "bool". For example:
switch ((int) (a == 4)) { ... }
This warning is enabled by default for C and C
++programs. - -Wswitch-unreachable
-
Warn whenever a "switch" statement contains statements between the
controlling expression and the first case label, which will never be
executed. For example:
switch (cond) { i = 15; ... case 5: ... }
-Wswitch-unreachable does not warn if the statement between the controlling expression and the first case label is just a declaration:
switch (cond) { int i; ... case 5: i = 5; ... }
This warning is enabled by default for C and C
++programs. - -Wsync-nand (C and C++only)
-
Warn when "__sync_fetch_and_nand" and "__sync_nand_and_fetch"
built-in functions are used. These functions changed semantics in GCC 4.4.
- -Wunused-but-set-parameter
-
Warn whenever a function parameter is assigned to, but otherwise unused
(aside from its declaration).
To suppress this warning use the "unused" attribute.
This warning is also enabled by -Wunused together with -Wextra.
- -Wunused-but-set-variable
-
Warn whenever a local variable is assigned to, but otherwise unused
(aside from its declaration).
This warning is enabled by -Wall.
To suppress this warning use the "unused" attribute.
This warning is also enabled by -Wunused, which is enabled by -Wall.
- -Wunused-function
- Warn whenever a static function is declared but not defined or a non-inline static function is unused. This warning is enabled by -Wall.
- -Wunused-label
-
Warn whenever a label is declared but not used.
This warning is enabled by -Wall.
To suppress this warning use the "unused" attribute.
- -Wunused-local-typedefs (C, Objective-C, C++and Objective-C++only)
- Warn when a typedef locally defined in a function is not used. This warning is enabled by -Wall.
- -Wunused-parameter
-
Warn whenever a function parameter is unused aside from its declaration.
To suppress this warning use the "unused" attribute.
- -Wno-unused-result
- Do not warn if a caller of a function marked with attribute "warn_unused_result" does not use its return value. The default is -Wunused-result.
- -Wunused-variable
-
Warn whenever a local or static variable is unused aside from its
declaration. This option implies -Wunused-const-variable=1 for C,
but not for C++. This warning is enabled by -Wall.
To suppress this warning use the "unused" attribute.
- -Wunused-const-variable
- -Wunused-const-variable=n
-
Warn whenever a constant static variable is unused aside from its declaration.
-Wunused-const-variable=1 is enabled by -Wunused-variable
for C, but not for C++. In C this declares variable storage, but in C++this is not an error since const variables take the place of "#define"s.
To suppress this warning use the "unused" attribute.
-
- -Wunused-const-variable=1
- This is the warning level that is enabled by -Wunused-variable for C. It warns only about unused static const variables defined in the main compilation unit, but not about static const variables declared in any header included.
- -Wunused-const-variable=2
-
This warning level also warns for unused constant static variables in
headers (excluding system headers). This is the warning level of
-Wunused-const-variable and must be explicitly requested since
in C++this isn't an error and in C it might be harder to clean up all headers included.
-
- -Wunused-value
-
Warn whenever a statement computes a result that is explicitly not
used. To suppress this warning cast the unused expression to
"void". This includes an expression-statement or the left-hand
side of a comma expression that contains no side effects. For example,
an expression such as "x[i,j]" causes a warning, while
"x[(void)i,j]" does not.
This warning is enabled by -Wall.
- -Wunused
-
All the above -Wunused options combined.
In order to get a warning about an unused function parameter, you must either specify -Wextra -Wunused (note that -Wall implies -Wunused), or separately specify -Wunused-parameter.
- -Wuninitialized
-
Warn if an automatic variable is used without first being initialized
or if a variable may be clobbered by a "setjmp" call. In C++, warn if a non-static reference or non-static "const" member appears in a class without constructors.
If you want to warn about code that uses the uninitialized value of the variable in its own initializer, use the -Winit-self option.
These warnings occur for individual uninitialized or clobbered elements of structure, union or array variables as well as for variables that are uninitialized or clobbered as a whole. They do not occur for variables or elements declared "volatile". Because these warnings depend on optimization, the exact variables or elements for which there are warnings depends on the precise optimization options and version of
GCCused.Note that there may be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data flow analysis before the warnings are printed.
- -Winvalid-memory-model
-
Warn for invocations of __atomic Builtins, __sync Builtins,
and the C11 atomic generic functions with a memory consistency argument
that is either invalid for the operation or outside the range of values
of the "memory_order" enumeration. For example, since the
"__atomic_store" and "__atomic_store_n" built-ins are only
defined for the relaxed, release, and sequentially consistent memory
orders the following code is diagnosed:
void store (int *i) { __atomic_store_n (i, 0, memory_order_consume); }
-Winvalid-memory-model is enabled by default.
- -Wmaybe-uninitialized
-
For an automatic variable, if there exists a path from the function
entry to a use of the variable that is initialized, but there exist
some other paths for which the variable is not initialized, the compiler
emits a warning if it cannot prove the uninitialized paths are not
executed at run time. These warnings are made optional because GCCis not smart enough to see all the reasons why the code might be correct in spite of appearing to have an error. Here is one example of how this can happen:
{ int x; switch (y) { case 1: x = 1; break; case 2: x = 4; break; case 3: x = 5; } foo (x); }
If the value of "y" is always 1, 2 or 3, then "x" is always initialized, but
GCCdoesn't know this. To suppress the warning, you need to provide a default case with assert(0) or similar code.This option also warns when a non-volatile automatic variable might be changed by a call to "longjmp". These warnings as well are possible only in optimizing compilation.
The compiler sees only the calls to "setjmp". It cannot know where "longjmp" will be called; in fact, a signal handler could call it at any point in the code. As a result, you may get a warning even when there is in fact no problem because "longjmp" cannot in fact be called at the place that would cause a problem.
Some spurious warnings can be avoided if you declare all the functions you use that never return as "noreturn".
This warning is enabled by -Wall or -Wextra.
- -Wunknown-pragmas
-
Warn when a "#pragma" directive is encountered that is not understood by
GCC.If this command-line option is used, warnings are even issued for unknown pragmas in system header files. This is not the case if the warnings are only enabled by the -Wall command-line option.
- -Wno-pragmas
- Do not warn about misuses of pragmas, such as incorrect parameters, invalid syntax, or conflicts between pragmas. See also -Wunknown-pragmas.
- -Wstrict-aliasing
- This option is only active when -fstrict-aliasing is active. It warns about code that might break the strict aliasing rules that the compiler is using for optimization. The warning does not catch all cases, but does attempt to catch the more common pitfalls. It is included in -Wall. It is equivalent to -Wstrict-aliasing=3
- -Wstrict-aliasing=n
-
This option is only active when -fstrict-aliasing is active.
It warns about code that might break the strict aliasing rules that the
compiler is using for optimization.
Higher levels correspond to higher accuracy (fewer false positives).
Higher levels also correspond to more effort, similar to the way -O
works.
-Wstrict-aliasing is equivalent to -Wstrict-aliasing=3.
Level 1: Most aggressive, quick, least accurate. Possibly useful when higher levels do not warn but -fstrict-aliasing still breaks the code, as it has very few false negatives. However, it has many false positives. Warns for all pointer conversions between possibly incompatible types, even if never dereferenced. Runs in the front end only.
Level 2: Aggressive, quick, not too precise. May still have many false positives (not as many as level 1 though), and few false negatives (but possibly more than level 1). Unlike level 1, it only warns when an address is taken. Warns about incomplete types. Runs in the front end only.
Level 3 (default for -Wstrict-aliasing): Should have very few false positives and few false negatives. Slightly slower than levels 1 or 2 when optimization is enabled. Takes care of the common pun+dereference pattern in the front end: "*(int*)&some_float". If optimization is enabled, it also runs in the back end, where it deals with multiple statement cases using flow-sensitive points-to information. Only warns when the converted pointer is dereferenced. Does not warn about incomplete types.
- -Wstrict-overflow
- -Wstrict-overflow=n
-
This option is only active when -fstrict-overflow is active.
It warns about cases where the compiler optimizes based on the
assumption that signed overflow does not occur. Note that it does not
warn about all cases where the code might overflow: it only warns
about cases where the compiler implements some optimization. Thus
this warning depends on the optimization level.
An optimization that assumes that signed overflow does not occur is perfectly safe if the values of the variables involved are such that overflow never does, in fact, occur. Therefore this warning can easily give a false positive: a warning about code that is not actually a problem. To help focus on important issues, several warning levels are defined. No warnings are issued for the use of undefined signed overflow when estimating how many iterations a loop requires, in particular when determining whether a loop will be executed at all.
-
- -Wstrict-overflow=1
- Warn about cases that are both questionable and easy to avoid. For example, with -fstrict-overflow, the compiler simplifies "x + 1 > x" to 1. This level of -Wstrict-overflow is enabled by -Wall; higher levels are not, and must be explicitly requested.
- -Wstrict-overflow=2
- Also warn about other cases where a comparison is simplified to a constant. For example: "abs (x) >= 0". This can only be simplified when -fstrict-overflow is in effect, because "abs (INT_MIN)" overflows to "INT_MIN", which is less than zero. -Wstrict-overflow (with no level) is the same as -Wstrict-overflow=2.
- -Wstrict-overflow=3
- Also warn about other cases where a comparison is simplified. For example: "x + 1 > 1" is simplified to "x > 0".
- -Wstrict-overflow=4
- Also warn about other simplifications not covered by the above cases. For example: "(x * 10) / 5" is simplified to "x * 2".
- -Wstrict-overflow=5
- Also warn about cases where the compiler reduces the magnitude of a constant involved in a comparison. For example: "x + 2 > y" is simplified to "x + 1 >= y". This is reported only at the highest warning level because this simplification applies to many comparisons, so this warning level gives a very large number of false positives.
-
- -Wstringop-overflow
- -Wstringop-overflow=type
-
Warn for calls to string manipulation functions such as "memcpy" and
"strcpy" that are determined to overflow the destination buffer. The
optional argument is one greater than the type of Object Size Checking to
perform to determine the size of the destination.
The argument is meaningful only for functions that operate on character arrays
but not for raw memory functions like "memcpy" which always make use
of Object Size type-0. The option also warns for calls that specify a size
in excess of the largest possible object or at most "SIZE_MAX / 2" bytes.
The option produces the best results with optimization enabled but can detect
a small subset of simple buffer overflows even without optimization in
calls to the GCCbuilt-in functions like "__builtin_memcpy" that correspond to the standard functions. In any case, the option warns about just a subset of buffer overflows detected by the corresponding overflow checking built-ins. For example, the option will issue a warning for the "strcpy" call below because it copies at least 5 characters (the string "blue" including the terminatingNUL) into the buffer of size 4.
enum Color { blue, purple, yellow }; const char* f (enum Color clr) { static char buf [4]; const char *str; switch (clr) { case blue: str = "blue"; break; case purple: str = "purple"; break; case yellow: str = "yellow"; break; } return strcpy (buf, str); // warning here }
Option -Wstringop-overflow=2 is enabled by default.
-
- -Wstringop-overflow
- -Wstringop-overflow=1
- The -Wstringop-overflow=1 option uses type-zero Object Size Checking to determine the sizes of destination objects. This is the default setting of the option. At this setting the option will not warn for writes past the end of subobjects of larger objects accessed by pointers unless the size of the largest surrounding object is known. When the destination may be one of several objects it is assumed to be the largest one of them. On Linux systems, when optimization is enabled at this setting the option warns for the same code as when the "_FORTIFY_SOURCE" macro is defined to a non-zero value.
- -Wstringop-overflow=2
- The -Wstringop-overflow=2 option uses type-one Object Size Checking to determine the sizes of destination objects. At this setting the option will warn about overflows when writing to members of the largest complete objects whose exact size is known. It will, however, not warn for excessive writes to the same members of unknown objects referenced by pointers since they may point to arrays containing unknown numbers of elements.
- -Wstringop-overflow=3
- The -Wstringop-overflow=3 option uses type-two Object Size Checking to determine the sizes of destination objects. At this setting the option warns about overflowing the smallest object or data member. This is the most restrictive setting of the option that may result in warnings for safe code.
- -Wstringop-overflow=4
- The -Wstringop-overflow=4 option uses type-three Object Size Checking to determine the sizes of destination objects. At this setting the option will warn about overflowing any data members, and when the destination is one of several objects it uses the size of the largest of them to decide whether to issue a warning. Similarly to -Wstringop-overflow=3 this setting of the option may result in warnings for benign code.
-
- -Wsuggest-attribute=[pure|const|noreturn|format]
-
Warn for cases where adding an attribute may be beneficial. The
attributes currently supported are listed below.
-
- -Wsuggest-attribute=pure
- -Wsuggest-attribute=const
- -Wsuggest-attribute=noreturn
- Warn about functions that might be candidates for attributes "pure", "const" or "noreturn". The compiler only warns for functions visible in other compilation units or (in the case of "pure" and "const") if it cannot prove that the function returns normally. A function returns normally if it doesn't contain an infinite loop or return abnormally by throwing, calling "abort" or trapping. This analysis requires option -fipa-pure-const, which is enabled by default at -O and higher. Higher optimization levels improve the accuracy of the analysis.
- -Wsuggest-attribute=format
- -Wmissing-format-attribute
-
Warn about function pointers that might be candidates for "format"
attributes. Note these are only possible candidates, not absolute ones.
GCCguesses that function pointers with "format" attributes that are used in assignment, initialization, parameter passing or return statements should have a corresponding "format" attribute in the resulting type. I.e. the left-hand side of the assignment or initialization, the type of the parameter variable, or the return type of the containing function respectively should also have a "format" attribute to avoid the warning.GCCalso warns about function definitions that might be candidates for "format" attributes. Again, these are only possible candidates.GCCguesses that "format" attributes might be appropriate for any function that calls a function like "vprintf" or "vscanf", but this might not always be the case, and some functions for which "format" attributes are appropriate may not be detected.
-
- -Wsuggest-final-types
-
Warn about types with virtual methods where code quality would be improved
if the type were declared with the C++11 "final" specifier, or, if possible, declared in an anonymous namespace. This allowsGCCto more aggressively devirtualize the polymorphic calls. This warning is more effective with link time optimization, where the information about the class hierarchy graph is more complete.
- -Wsuggest-final-methods
-
Warn about virtual methods where code quality would be improved if the method
were declared with the C++11 "final" specifier, or, if possible, its type were declared in an anonymous namespace or with the "final" specifier. This warning is more effective with link-time optimization, where the information about the class hierarchy graph is more complete. It is recommended to first consider suggestions of -Wsuggest-final-types and then rebuild with new annotations.
- -Wsuggest-override
- Warn about overriding virtual functions that are not marked with the override keyword.
- -Walloc-zero
- Warn about calls to allocation functions decorated with attribute "alloc_size" that specify zero bytes, including those to the built-in forms of the functions "aligned_alloc", "alloca", "calloc", "malloc", and "realloc". Because the behavior of these functions when called with a zero size differs among implementations (and in the case of "realloc" has been deprecated) relying on it may result in subtle portability bugs and should be avoided.
- -Walloc-size-larger-than=n
- Warn about calls to functions decorated with attribute "alloc_size" that attempt to allocate objects larger than the specified number of bytes, or where the result of the size computation in an integer type with infinite precision would exceed "SIZE_MAX / 2". The option argument n may end in one of the standard suffixes designating a multiple of bytes such as "kB" and "KiB" for kilobyte and kibibyte, respectively, "MB" and "MiB" for megabyte and mebibyte, and so on.
- -Walloca
- This option warns on all uses of "alloca" in the source.
- -Walloca-larger-than=n
-
This option warns on calls to "alloca" that are not bounded by a
controlling predicate limiting its argument of integer type to at most
n bytes, or calls to "alloca" where the bound is unknown.
Arguments of non-integer types are considered unbounded even if they
appear to be constrained to the expected range.
For example, a bounded case of "alloca" could be:
void func (size_t n) { void *p; if (n <= 1000) p = alloca (n); else p = malloc (n); f (p); }
In the above example, passing "-Walloca-larger-than=1000" would not issue a warning because the call to "alloca" is known to be at most 1000 bytes. However, if "-Walloca-larger-than=500" were passed, the compiler would emit a warning.
Unbounded uses, on the other hand, are uses of "alloca" with no controlling predicate constraining its integer argument. For example:
void func () { void *p = alloca (n); f (p); }
If "-Walloca-larger-than=500" were passed, the above would trigger a warning, but this time because of the lack of bounds checking.
Note, that even seemingly correct code involving signed integers could cause a warning:
void func (signed int n) { if (n < 500) { p = alloca (n); f (p); } }
In the above example, n could be negative, causing a larger than expected argument to be implicitly cast into the "alloca" call.
This option also warns when "alloca" is used in a loop.
This warning is not enabled by -Wall, and is only active when -ftree-vrp is active (default for -O2 and above).
See also -Wvla-larger-than=n.
- -Warray-bounds
- -Warray-bounds=n
-
This option is only active when -ftree-vrp is active
(default for -O2 and above). It warns about subscripts to arrays
that are always out of bounds. This warning is enabled by -Wall.
-
- -Warray-bounds=1
- This is the warning level of -Warray-bounds and is enabled by -Wall; higher levels are not, and must be explicitly requested.
- -Warray-bounds=2
- This warning level also warns about out of bounds access for arrays at the end of a struct and for arrays accessed through pointers. This warning level may give a larger number of false positives and is deactivated by default.
-
- -Wbool-compare
-
Warn about boolean expression compared with an integer value different from
"true"/"false". For instance, the following comparison is
always false:
int n = 5; ... if ((n > 1) == 2) { ... }
This warning is enabled by -Wall.
- -Wbool-operation
-
Warn about suspicious operations on expressions of a boolean type. For
instance, bitwise negation of a boolean is very likely a bug in the program.
For C, this warning also warns about incrementing or decrementing a boolean,
which rarely makes sense. (In C++, decrementing a boolean is always invalid. Incrementing a boolean is invalid in C++1z, and deprecated otherwise.)
This warning is enabled by -Wall.
- -Wduplicated-branches
-
Warn when an if-else has identical branches. This warning detects cases like
if (p != NULL) return 0; else return 0;
It doesn't warn when both branches contain just a null statement. This warning also warn for conditional operators:
int i = x ? *p : *p;
- -Wduplicated-cond
-
Warn about duplicated conditions in an if-else-if chain. For instance,
warn for the following code:
if (p->q != NULL) { ... } else if (p->q != NULL) { ... }
- -Wframe-address
- Warn when the __builtin_frame_address or __builtin_return_address is called with an argument greater than 0. Such calls may return indeterminate values or crash the program. The warning is included in -Wall.
- -Wno-discarded-qualifiers (C and Objective-C only)
- Do not warn if type qualifiers on pointers are being discarded. Typically, the compiler warns if a "const char *" variable is passed to a function that takes a "char *" parameter. This option can be used to suppress such a warning.
- -Wno-discarded-array-qualifiers (C and Objective-C only)
- Do not warn if type qualifiers on arrays which are pointer targets are being discarded. Typically, the compiler warns if a "const int (*)[]" variable is passed to a function that takes a "int (*)[]" parameter. This option can be used to suppress such a warning.
- -Wno-incompatible-pointer-types (C and Objective-C only)
- Do not warn when there is a conversion between pointers that have incompatible types. This warning is for cases not covered by -Wno-pointer-sign, which warns for pointer argument passing or assignment with different signedness.
- -Wno-int-conversion (C and Objective-C only)
- Do not warn about incompatible integer to pointer and pointer to integer conversions. This warning is about implicit conversions; for explicit conversions the warnings -Wno-int-to-pointer-cast and -Wno-pointer-to-int-cast may be used.
- -Wno-div-by-zero
- Do not warn about compile-time integer division by zero. Floating-point division by zero is not warned about, as it can be a legitimate way of obtaining infinities and NaNs.
- -Wsystem-headers
-
Print warning messages for constructs found in system header files.
Warnings from system headers are normally suppressed, on the assumption
that they usually do not indicate real problems and would only make the
compiler output harder to read. Using this command-line option tells
GCCto emit warnings from system headers as if they occurred in user code. However, note that using -Wall in conjunction with this option does not warn about unknown pragmas in system headers---for that, -Wunknown-pragmas must also be used.
- -Wtautological-compare
-
Warn if a self-comparison always evaluates to true or false. This
warning detects various mistakes such as:
int i = 1; ... if (i > i) { ... }
This warning is enabled by -Wall.
- -Wtrampolines
- Warn about trampolines generated for pointers to nested functions. A trampoline is a small piece of data or code that is created at run time on the stack when the address of a nested function is taken, and is used to call the nested function indirectly. For some targets, it is made up of data only and thus requires no special treatment. But, for most targets, it is made up of code and thus requires the stack to be made executable in order for the program to work properly.
- -Wfloat-equal
-
Warn if floating-point values are used in equality comparisons.
The idea behind this is that sometimes it is convenient (for the programmer) to consider floating-point values as approximations to infinitely precise real numbers. If you are doing this, then you need to compute (by analyzing the code, or in some other way) the maximum or likely maximum error that the computation introduces, and allow for it when performing comparisons (and when producing output, but that's a different problem). In particular, instead of testing for equality, you should check to see whether the two values have ranges that overlap; and this is done with the relational operators, so equality comparisons are probably mistaken.
- -Wtraditional (C and Objective-C only)
-
Warn about certain constructs that behave differently in traditional and
ISO C.Also warn aboutISO Cconstructs that have no traditional C equivalent, and/or problematic constructs that should be avoided.
-
- *
-
Macro parameters that appear within string literals in the macro body.
In traditional C macro replacement takes place within string literals,
but in ISO Cit does not.
- *
- In traditional C, some preprocessor directives did not exist. Traditional preprocessors only considered a line to be a directive if the # appeared in column 1 on the line. Therefore -Wtraditional warns about directives that traditional C understands but ignores because the # does not appear as the first character on the line. It also suggests you hide directives like "#pragma" not understood by traditional C by indenting them. Some traditional implementations do not recognize "#elif", so this option suggests avoiding it altogether.
- *
- A function-like macro that appears without arguments.
- *
- The unary plus operator.
- *
-
The U integer constant suffix, or the F or L floating-point
constant suffixes. (Traditional C does support the L suffix on integer
constants.) Note, these suffixes appear in macros defined in the system
headers of most modern systems, e.g. the _MIN/_MAX macros in "<limits.h>".
Use of these macros in user code might normally lead to spurious
warnings, however GCC's integrated preprocessor has enough context to avoid warning in these cases.
- *
- A function declared external in one block and then used after the end of the block.
- *
- A "switch" statement has an operand of type "long".
- *
- A non-"static" function declaration follows a "static" one. This construct is not accepted by some traditional C compilers.
- *
-
The ISOtype of an integer constant has a different width or signedness from its traditional type. This warning is only issued if the base of the constant is ten. I.e. hexadecimal or octal values, which typically represent bit patterns, are not warned about.
- *
-
Usage of ISOstring concatenation is detected.
- *
- Initialization of automatic aggregates.
- *
- Identifier conflicts with labels. Traditional C lacks a separate namespace for labels.
- *
- Initialization of unions. If the initializer is zero, the warning is omitted. This is done under the assumption that the zero initializer in user code appears conditioned on e.g. "__STDC__" to avoid missing initializer warnings and relies on default initialization to zero in the traditional C case.
- *
- Conversions by prototypes between fixed/floating-point values and vice versa. The absence of these prototypes when compiling with traditional C causes serious problems. This is a subset of the possible conversion warnings; for the full set use -Wtraditional-conversion.
- *
-
Use of ISO Cstyle function definitions. This warning intentionally is not issued for prototype declarations or variadic functions because theseISO Cfeatures appear in your code when using libiberty's traditional C compatibility macros, "PARAMS" and "VPARAMS". This warning is also bypassed for nested functions because that feature is already aGCCextension and thus not relevant to traditional C compatibility.
-
- -Wtraditional-conversion (C and Objective-C only)
- Warn if a prototype causes a type conversion that is different from what would happen to the same argument in the absence of a prototype. This includes conversions of fixed point to floating and vice versa, and conversions changing the width or signedness of a fixed-point argument except when the same as the default promotion.
- -Wdeclaration-after-statement (C and Objective-C only)
-
Warn when a declaration is found after a statement in a block. This
construct, known from C++, was introduced withISO C99and is by default allowed inGCC.It is not supported byISO C90.
- -Wshadow
-
Warn whenever a local variable or type declaration shadows another
variable, parameter, type, class member (in C++), or instance variable (in Objective-C) or whenever a built-in function is shadowed. Note that in C++, the compiler warns if a local variable shadows an explicit typedef, but not if it shadows a struct/class/enum. Same as -Wshadow=global.
- -Wno-shadow-ivar (Objective-C only)
- Do not warn whenever a local variable shadows an instance variable in an Objective-C method.
- -Wshadow=global
- The default for -Wshadow. Warns for any (global) shadowing.
- -Wshadow=local
- Warn when a local variable shadows another local variable or parameter. This warning is enabled by -Wshadow=global.
- -Wshadow=compatible-local
-
Warn when a local variable shadows another local variable or parameter
whose type is compatible with that of the shadowing variable. In C++, type compatibility here means the type of the shadowing variable can be converted to that of the shadowed variable. The creation of this flag (in addition to -Wshadow=local) is based on the idea that when a local variable shadows another one of incompatible type, it is most likely intentional, not a bug or typo, as shown in the following example:
for (SomeIterator i = SomeObj.begin(); i != SomeObj.end(); ++i) { for (int i = 0; i < N; ++i) { ... } ... }
Since the two variable "i" in the example above have incompatible types, enabling only -Wshadow=compatible-local will not emit a warning. Because their types are incompatible, if a programmer accidentally uses one in place of the other, type checking will catch that and emit an error or warning. So not warning (about shadowing) in this case will not lead to undetected bugs. Use of this flag instead of -Wshadow=local can possibly reduce the number of warnings triggered by intentional shadowing.
This warning is enabled by -Wshadow=local.
- -Wlarger-than=len
- Warn whenever an object of larger than len bytes is defined.
- -Wframe-larger-than=len
- Warn if the size of a function frame is larger than len bytes. The computation done to determine the stack frame size is approximate and not conservative. The actual requirements may be somewhat greater than len even if you do not get a warning. In addition, any space allocated via "alloca", variable-length arrays, or related constructs is not included by the compiler when determining whether or not to issue a warning.
- -Wno-free-nonheap-object
- Do not warn when attempting to free an object that was not allocated on the heap.
- -Wstack-usage=len
-
Warn if the stack usage of a function might be larger than len bytes.
The computation done to determine the stack usage is conservative.
Any space allocated via "alloca", variable-length arrays, or related
constructs is included by the compiler when determining whether or not to
issue a warning.
The message is in keeping with the output of -fstack-usage.
-
- *
-
If the stack usage is fully static but exceeds the specified amount, it's:
warning: stack usage is 1120 bytes
- *
-
If the stack usage is (partly) dynamic but bounded, it's:
warning: stack usage might be 1648 bytes
- *
-
If the stack usage is (partly) dynamic and not bounded, it's:
warning: stack usage might be unbounded
-
- -Wunsafe-loop-optimizations
- Warn if the loop cannot be optimized because the compiler cannot assume anything on the bounds of the loop indices. With -funsafe-loop-optimizations warn if the compiler makes such assumptions.
- -Wno-pedantic-ms-format (MinGW targets only)
-
When used in combination with -Wformat
and -pedantic without GNUextensions, this option disables the warnings about non-ISO "printf" / "scanf" format width specifiers "I32", "I64", and "I" used on Windows targets, which depend on theMSruntime.
- -Waligned-new
-
Warn about a new-expression of a type that requires greater alignment
than the "alignof(std::max_align_t)" but uses an allocation
function without an explicit alignment parameter. This option is
enabled by -Wall.
Normally this only warns about global allocation functions, but -Waligned-new=all also warns about class member allocation functions.
- -Wplacement-new
- -Wplacement-new=n
-
Warn about placement new expressions with undefined behavior, such as
constructing an object in a buffer that is smaller than the type of
the object. For example, the placement new expression below is diagnosed
because it attempts to construct an array of 64 integers in a buffer only
64 bytes large.
char buf [64]; new (buf) int[64];
This warning is enabled by default.
-
- -Wplacement-new=1
-
This is the default warning level of -Wplacement-new. At this
level the warning is not issued for some strictly undefined constructs that
GCCallows as extensions for compatibility with legacy code. For example, the following "new" expression is not diagnosed at this level even though it has undefined behavior according to the C++standard because it writes past the end of the one-element array.
struct S { int n, a[1]; }; S *s = (S *)malloc (sizeof *s + 31 * sizeof s->a[0]); new (s->a)int [32]();
- -Wplacement-new=2
-
At this level, in addition to diagnosing all the same constructs as at level
1, a diagnostic is also issued for placement new expressions that construct
an object in the last member of structure whose type is an array of a single
element and whose size is less than the size of the object being constructed.
While the previous example would be diagnosed, the following construct makes
use of the flexible member array extension to avoid the warning at level 2.
struct S { int n, a[]; }; S *s = (S *)malloc (sizeof *s + 32 * sizeof s->a[0]); new (s->a)int [32]();
-
- -Wpointer-arith
-
Warn about anything that depends on the ``size of'' a function type or
of "void". GNU Cassigns these types a size of 1, for convenience in calculations with "void *" pointers and pointers to functions. In C++, warn also when an arithmetic operation involves "NULL". This warning is also enabled by -Wpedantic.
- -Wpointer-compare
-
Warn if a pointer is compared with a zero character constant. This usually
means that the pointer was meant to be dereferenced. For example:
const char *p = foo (); if (p == '\0') return 42;
Note that the code above is invalid in C
++11.This warning is enabled by default.
- -Wtype-limits
- Warn if a comparison is always true or always false due to the limited range of the data type, but do not warn for constant expressions. For example, warn if an unsigned variable is compared against zero with "<" or ">=". This warning is also enabled by -Wextra.
- -Wcomment
- -Wcomments
- Warn whenever a comment-start sequence /* appears in a /* comment, or whenever a backslash-newline appears in a // comment. This warning is enabled by -Wall.
- -Wtrigraphs
-
Warn if any trigraphs are encountered that might change the meaning of
the program. Trigraphs within comments are not warned about,
except those that would form escaped newlines.
This option is implied by -Wall. If -Wall is not given, this option is still enabled unless trigraphs are enabled. To get trigraph conversion without warnings, but get the other -Wall warnings, use -trigraphs -Wall -Wno-trigraphs.
- -Wundef
- Warn if an undefined identifier is evaluated in an "#if" directive. Such identifiers are replaced with zero.
- -Wexpansion-to-defined
- Warn whenever defined is encountered in the expansion of a macro (including the case where the macro is expanded by an #if directive). Such usage is not portable. This warning is also enabled by -Wpedantic and -Wextra.
- -Wunused-macros
-
Warn about macros defined in the main file that are unused. A macro
is used if it is expanded or tested for existence at least once.
The preprocessor also warns if the macro has not been used at the
time it is redefined or undefined.
Built-in macros, macros defined on the command line, and macros defined in include files are not warned about.
Note: If a macro is actually used, but only used in skipped conditional blocks, then the preprocessor reports it as unused. To avoid the warning in such a case, you might improve the scope of the macro's definition by, for example, moving it into the first skipped block. Alternatively, you could provide a dummy use with something like:
#if defined the_macro_causing_the_warning #endif
- -Wno-endif-labels
-
Do not warn whenever an "#else" or an "#endif" are followed by text.
This sometimes happens in older programs with code of the form
#if FOO ... #else FOO ... #endif FOO
The second and third "FOO" should be in comments. This warning is on by default.
- -Wbad-function-cast (C and Objective-C only)
- Warn when a function call is cast to a non-matching type. For example, warn if a call to a function returning an integer type is cast to a pointer type.
- -Wc90-c99-compat (C and Objective-C only)
-
Warn about features not present in ISO C90,but present inISO C99.For instance, warn about use of variable length arrays, "long long" type, "bool" type, compound literals, designated initializers, and so on. This option is independent of the standards mode. Warnings are disabled in the expression that follows "__extension__".
- -Wc99-c11-compat (C and Objective-C only)
-
Warn about features not present in ISO C99,but present inISO C11.For instance, warn about use of anonymous structures and unions, "_Atomic" type qualifier, "_Thread_local" storage-class specifier, "_Alignas" specifier, "Alignof" operator, "_Generic" keyword, and so on. This option is independent of the standards mode. Warnings are disabled in the expression that follows "__extension__".
- -Wc++-compat (C and Objective-C only)
-
Warn about ISO Cconstructs that are outside of the common subset ofISO CandISO Ce.g. request for implicit conversion from "void *" to a pointer to non-"void" type.++,
- -Wc++11-compat (C++and Objective-C++only)
-
Warn about C++constructs whose meaning differs betweenISO Cand++1998ISO Ce.g., identifiers in++2011,ISO Cthat are keywords in++1998ISO CThis warning turns on -Wnarrowing and is enabled by -Wall.++2011.
- -Wc++14-compat (C++and Objective-C++only)
-
Warn about C++constructs whose meaning differs betweenISO Cand++2011ISO CThis warning is enabled by -Wall.++2014.
- -Wc++1z-compat (C++and Objective-C++only)
-
Warn about C++constructs whose meaning differs betweenISO Cand the forthoming++2014ISO C(?). This warning is enabled by -Wall.++2017
- -Wcast-qual
-
Warn whenever a pointer is cast so as to remove a type qualifier from
the target type. For example, warn if a "const char *" is cast
to an ordinary "char *".
Also warn when making a cast that introduces a type qualifier in an unsafe way. For example, casting "char **" to "const char **" is unsafe, as in this example:
/* p is char ** value. */ const char **q = (const char **) p; /* Assignment of readonly string to const char * is OK. */ *q = "string"; /* Now char** pointer points to read-only memory. */ **p = 'b';
- -Wcast-align
- Warn whenever a pointer is cast such that the required alignment of the target is increased. For example, warn if a "char *" is cast to an "int *" on machines where integers can only be accessed at two- or four-byte boundaries.
- -Wwrite-strings
-
When compiling C, give string constants the type "const
char[length]" so that copying the address of one into a
non-"const" "char *" pointer produces a warning. These
warnings help you find at compile time code that can try to write
into a string constant, but only if you have been very careful about
using "const" in declarations and prototypes. Otherwise, it is
just a nuisance. This is why we did not make -Wall request
these warnings.
When compiling C
++, warn about the deprecated conversion from string literals to "char *". This warning is enabled by default for C++programs. - -Wclobbered
- Warn for variables that might be changed by "longjmp" or "vfork". This warning is also enabled by -Wextra.
- -Wconditionally-supported (C++and Objective-C++only)
-
Warn for conditionally-supported (C++11 [intro.defs]) constructs.
- -Wconversion
-
Warn for implicit conversions that may alter a value. This includes
conversions between real and integer, like "abs (x)" when
"x" is "double"; conversions between signed and unsigned,
like "unsigned ui = -1"; and conversions to smaller types, like
"sqrtf (M_PI)". Do not warn for explicit casts like "abs
((int) x)" and "ui = (unsigned) -1", or if the value is not
changed by the conversion like in "abs (2.0)". Warnings about
conversions between signed and unsigned integers can be disabled by
using -Wno-sign-conversion.
For C
++, also warn for confusing overload resolution for user-defined conversions; and conversions that never use a type conversion operator: conversions to "void", the same type, a base class or a reference to them. Warnings about conversions between signed and unsigned integers are disabled by default in C++unless -Wsign-conversion is explicitly enabled. - -Wno-conversion-null (C++and Objective-C++only)
- Do not warn for conversions between "NULL" and non-pointer types. -Wconversion-null is enabled by default.
- -Wzero-as-null-pointer-constant (C++and Objective-C++only)
-
Warn when a literal 0 is used as null pointer constant. This can
be useful to facilitate the conversion to "nullptr" in C++11.
- -Wsubobject-linkage (C++and Objective-C++only)
-
Warn if a class type has a base or a field whose type uses the anonymous
namespace or depends on a type with no linkage. If a type A depends on
a type B with no or internal linkage, defining it in multiple
translation units would be an ODRviolation because the meaning of B is different in each translation unit. If A only appears in a single translation unit, the best way to silence the warning is to give it internal linkage by putting it in an anonymous namespace as well. The compiler doesn't give this warning for types defined in the main .C file, as those are unlikely to have multiple definitions. -Wsubobject-linkage is enabled by default.
- -Wdangling-else
-
Warn about constructions where there may be confusion to which
"if" statement an "else" branch belongs. Here is an example of
such a case:
{ if (a) if (b) foo (); else bar (); }
In C/C
++, every "else" branch belongs to the innermost possible "if" statement, which in this example is "if (b)". This is often not what the programmer expected, as illustrated in the above example by indentation the programmer chose. When there is the potential for this confusion,GCCissues a warning when this flag is specified. To eliminate the warning, add explicit braces around the innermost "if" statement so there is no way the "else" can belong to the enclosing "if". The resulting code looks like this:{ if (a) { if (b) foo (); else bar (); } }
This warning is enabled by -Wparentheses.
- -Wdate-time
- Warn when macros "__TIME__", "__DATE__" or "__TIMESTAMP__" are encountered as they might prevent bit-wise-identical reproducible compilations.
- -Wdelete-incomplete (C++and Objective-C++only)
- Warn when deleting a pointer to incomplete type, which may cause undefined behavior at runtime. This warning is enabled by default.
- -Wuseless-cast (C++and Objective-C++only)
- Warn when an expression is casted to its own type.
- -Wempty-body
- Warn if an empty body occurs in an "if", "else" or "do while" statement. This warning is also enabled by -Wextra.
- -Wenum-compare
-
Warn about a comparison between values of different enumerated types.
In C++enumerated type mismatches in conditional expressions are also diagnosed and the warning is enabled by default. In C this warning is enabled by -Wall.
- -Wjump-misses-init (C, Objective-C only)
-
Warn if a "goto" statement or a "switch" statement jumps
forward across the initialization of a variable, or jumps backward to a
label after the variable has been initialized. This only warns about
variables that are initialized when they are declared. This warning is
only supported for C and Objective-C; in C++this sort of branch is an error in any case.
-Wjump-misses-init is included in -Wc++-compat. It can be disabled with the -Wno-jump-misses-init option.
- -Wsign-compare
-
Warn when a comparison between signed and unsigned values could produce
an incorrect result when the signed value is converted to unsigned.
In C++, this warning is also enabled by -Wall. In C, it is also enabled by -Wextra.
- -Wsign-conversion
- Warn for implicit conversions that may change the sign of an integer value, like assigning a signed integer expression to an unsigned integer variable. An explicit cast silences the warning. In C, this option is enabled also by -Wconversion.
- -Wfloat-conversion
- Warn for implicit conversions that reduce the precision of a real value. This includes conversions from real to integer, and from higher precision real to lower precision real values. This option is also enabled by -Wconversion.
- -Wno-scalar-storage-order
- Do not warn on suspicious constructs involving reverse scalar storage order.
- -Wsized-deallocation (C++and Objective-C++only)
-
Warn about a definition of an unsized deallocation function
void operator delete (void *) noexcept; void operator delete[] (void *) noexcept;
without a definition of the corresponding sized deallocation function
void operator delete (void *, std::size_t) noexcept; void operator delete[] (void *, std::size_t) noexcept;
or vice versa. Enabled by -Wextra along with -fsized-deallocation.
- -Wsizeof-pointer-memaccess
- Warn for suspicious length parameters to certain string and memory built-in functions if the argument uses "sizeof". This warning warns e.g. about "memset (ptr, 0, sizeof (ptr));" if "ptr" is not an array, but a pointer, and suggests a possible fix, or about "memcpy (&foo, ptr, sizeof (&foo));". This warning is enabled by -Wall.
- -Wsizeof-array-argument
-
Warn when the "sizeof" operator is applied to a parameter that is
declared as an array in a function definition. This warning is enabled by
default for C and C++programs.
- -Wmemset-elt-size
- Warn for suspicious calls to the "memset" built-in function, if the first argument references an array, and the third argument is a number equal to the number of elements, but not equal to the size of the array in memory. This indicates that the user has omitted a multiplication by the element size. This warning is enabled by -Wall.
- -Wmemset-transposed-args
- Warn for suspicious calls to the "memset" built-in function, if the second argument is not zero and the third argument is zero. This warns e.g.@ about "memset (buf, sizeof buf, 0)" where most probably "memset (buf, 0, sizeof buf)" was meant instead. The diagnostics is only emitted if the third argument is literal zero. If it is some expression that is folded to zero, a cast of zero to some type, etc., it is far less likely that the user has mistakenly exchanged the arguments and no warning is emitted. This warning is enabled by -Wall.
- -Waddress
- Warn about suspicious uses of memory addresses. These include using the address of a function in a conditional expression, such as "void func(void); if (func)", and comparisons against the memory address of a string literal, such as "if (x == "abc")". Such uses typically indicate a programmer error: the address of a function always evaluates to true, so their use in a conditional usually indicate that the programmer forgot the parentheses in a function call; and comparisons against string literals result in unspecified behavior and are not portable in C, so they usually indicate that the programmer intended to use "strcmp". This warning is enabled by -Wall.
- -Wlogical-op
-
Warn about suspicious uses of logical operators in expressions.
This includes using logical operators in contexts where a
bit-wise operator is likely to be expected. Also warns when
the operands of a logical operator are the same:
extern int a; if (a < 0 && a < 0) { ... }
- -Wlogical-not-parentheses
-
Warn about logical not used on the left hand side operand of a comparison.
This option does not warn if the right operand is considered to be a boolean
expression. Its purpose is to detect suspicious code like the following:
int a; ... if (!a > 1) { ... }
It is possible to suppress the warning by wrapping the
LHSinto parentheses:if ((!a) > 1) { ... }
This warning is enabled by -Wall.
- -Waggregate-return
- Warn if any functions that return structures or unions are defined or called. (In languages where you can return an array, this also elicits a warning.)
- -Wno-aggressive-loop-optimizations
- Warn if in a loop with constant number of iterations the compiler detects undefined behavior in some statement during one or more of the iterations.
- -Wno-attributes
- Do not warn if an unexpected "__attribute__" is used, such as unrecognized attributes, function attributes applied to variables, etc. This does not stop errors for incorrect use of supported attributes.
- -Wno-builtin-declaration-mismatch
- Warn if a built-in function is declared with the wrong signature. This warning is enabled by default.
- -Wno-builtin-macro-redefined
- Do not warn if certain built-in macros are redefined. This suppresses warnings for redefinition of "__TIMESTAMP__", "__TIME__", "__DATE__", "__FILE__", and "__BASE_FILE__".
- -Wstrict-prototypes (C and Objective-C only)
- Warn if a function is declared or defined without specifying the argument types. (An old-style function definition is permitted without a warning if preceded by a declaration that specifies the argument types.)
- -Wold-style-declaration (C and Objective-C only)
- Warn for obsolescent usages, according to the C Standard, in a declaration. For example, warn if storage-class specifiers like "static" are not the first things in a declaration. This warning is also enabled by -Wextra.
- -Wold-style-definition (C and Objective-C only)
- Warn if an old-style function definition is used. A warning is given even if there is a previous prototype.
- -Wmissing-parameter-type (C and Objective-C only)
-
A function parameter is declared without a type specifier in K&R-style
functions:
void foo(bar) { }
This warning is also enabled by -Wextra.
- -Wmissing-prototypes (C and Objective-C only)
-
Warn if a global function is defined without a previous prototype
declaration. This warning is issued even if the definition itself
provides a prototype. Use this option to detect global functions
that do not have a matching prototype declaration in a header file.
This option is not valid for C++because all function declarations provide prototypes and a non-matching declaration declares an overload rather than conflict with an earlier declaration. Use -Wmissing-declarations to detect missing declarations in C++.
- -Wmissing-declarations
-
Warn if a global function is defined without a previous declaration.
Do so even if the definition itself provides a prototype.
Use this option to detect global functions that are not declared in
header files. In C, no warnings are issued for functions with previous
non-prototype declarations; use -Wmissing-prototypes to detect
missing prototypes. In C++, no warnings are issued for function templates, or for inline functions, or for functions in anonymous namespaces.
- -Wmissing-field-initializers
-
Warn if a structure's initializer has some fields missing. For
example, the following code causes such a warning, because
"x.h" is implicitly zero:
struct s { int f, g, h; }; struct s x = { 3, 4 };
This option does not warn about designated initializers, so the following modification does not trigger a warning:
struct s { int f, g, h; }; struct s x = { .f = 3, .g = 4 };
In C
++this option does not warn either about the empty { } initializer, for example:struct s { int f, g, h; }; s x = { };
This warning is included in -Wextra. To get other -Wextra warnings without this one, use -Wextra -Wno-missing-field-initializers.
- -Wno-multichar
-
Do not warn if a multicharacter constant ('FOOF') is used. Usually they indicate a typo in the user's code, as they have implementation-defined values, and should not be used in portable code.
- -Wnormalized=[none|id|nfc|nfkc]
-
In ISO CandISO Ctwo identifiers are different if they are different sequences of characters. However, sometimes when characters outside the basic++,ASCIIcharacter set are used, you can have two different character sequences that look the same. To avoid confusion, theISO 10646standard sets out some normalization rules which when applied ensure that two sequences that look the same are turned into the same sequence.GCCcan warn you if you are using identifiers that have not been normalized; this option controls that warning.
There are four levels of warning supported by
GCC.The default is -Wnormalized=nfc, which warns about any identifier that is not in theISO 10646 ``C''normalized form,NFC.NFCis the recommended form for most uses. It is equivalent to -Wnormalized.Unfortunately, there are some characters allowed in identifiers by
ISO CandISO Cthat, when turned into++NFC,are not allowed in identifiers. That is, there's no way to use these symbols in portableISO Cor C++and have all your identifiers inNFC.-Wnormalized=id suppresses the warning for these characters. It is hoped that future versions of the standards involved will correct this, which is why this option is not the default.You can switch the warning off for all characters by writing -Wnormalized=none or -Wno-normalized. You should only do this if you are using some other normalization scheme (like ``D''), because otherwise you can easily create bugs that are literally impossible to see.
Some characters in
ISO 10646have distinct meanings but look identical in some fonts or display methodologies, especially once formatting has been applied. For instance "\u207F", ``SUPERSCRIPT LATIN SMALL LETTER N'',displays just like a regular "n" that has been placed in a superscript.ISO 10646defines theNFKCnormalization scheme to convert all these into a standard form as well, andGCCwarns if your code is not inNFKCif you use -Wnormalized=nfkc. This warning is comparable to warning about every identifier that contains the letter O because it might be confused with the digit 0, and so is not the default, but may be useful as a local coding convention if the programming environment cannot be fixed to display these characters distinctly. - -Wno-deprecated
- Do not warn about usage of deprecated features.
- -Wno-deprecated-declarations
- Do not warn about uses of functions, variables, and types marked as deprecated by using the "deprecated" attribute.
- -Wno-overflow
- Do not warn about compile-time overflow in constant expressions.
- -Wno-odr
- Warn about One Definition Rule violations during link-time optimization. Requires -flto-odr-type-merging to be enabled. Enabled by default.
- -Wopenmp-simd
- Warn if the vectorizer cost model overrides the OpenMP or the Cilk Plus simd directive set by user. The -fsimd-cost-model=unlimited option can be used to relax the cost model.
- -Woverride-init (C and Objective-C only)
-
Warn if an initialized field without side effects is overridden when
using designated initializers.
This warning is included in -Wextra. To get other -Wextra warnings without this one, use -Wextra -Wno-override-init.
- -Woverride-init-side-effects (C and Objective-C only)
- Warn if an initialized field with side effects is overridden when using designated initializers. This warning is enabled by default.
- -Wpacked
-
Warn if a structure is given the packed attribute, but the packed
attribute has no effect on the layout or size of the structure.
Such structures may be mis-aligned for little benefit. For
instance, in this code, the variable "f.x" in "struct bar"
is misaligned even though "struct bar" does not itself
have the packed attribute:
struct foo { int x; char a, b, c, d; } __attribute__((packed)); struct bar { char z; struct foo f; };
- -Wpacked-bitfield-compat
-
The 4.1, 4.2 and 4.3 series of GCCignore the "packed" attribute on bit-fields of type "char". This has been fixed inGCC 4.4but the change can lead to differences in the structure layout.GCCinforms you when the offset of such a field has changed inGCC 4.4.For example there is no longer a 4-bit padding between field "a" and "b" in this structure:
struct foo { char a:4; char b:8; } __attribute__ ((packed));
This warning is enabled by default. Use -Wno-packed-bitfield-compat to disable this warning.
- -Wpadded
- Warn if padding is included in a structure, either to align an element of the structure or to align the whole structure. Sometimes when this happens it is possible to rearrange the fields of the structure to reduce the padding and so make the structure smaller.
- -Wredundant-decls
- Warn if anything is declared more than once in the same scope, even in cases where multiple declaration is valid and changes nothing.
- -Wrestrict
- Warn when an argument passed to a restrict-qualified parameter aliases with another argument.
- -Wnested-externs (C and Objective-C only)
- Warn if an "extern" declaration is encountered within a function.
- -Wno-inherited-variadic-ctor
-
Suppress warnings about use of C++11 inheriting constructors when the base class inherited from has a C variadic constructor; the warning is on by default because the ellipsis is not inherited.
- -Winline
-
Warn if a function that is declared as inline cannot be inlined.
Even with this option, the compiler does not warn about failures to
inline functions declared in system headers.
The compiler uses a variety of heuristics to determine whether or not to inline a function. For example, the compiler takes into account the size of the function being inlined and the amount of inlining that has already been done in the current function. Therefore, seemingly insignificant changes in the source program can cause the warnings produced by -Winline to appear or disappear.
- -Wno-invalid-offsetof (C++and Objective-C++only)
-
Suppress warnings from applying the "offsetof" macro to a non-POD
type. According to the 2014 ISO Cstandard, applying "offsetof" to a non-standard-layout type is undefined. In existing C++++implementations, however, "offsetof" typically gives meaningful results. This flag is for users who are aware that they are writing nonportable code and who have deliberately chosen to ignore the warning about it.
The restrictions on "offsetof" may be relaxed in a future version of the C
++standard. - -Wint-in-bool-context
- Warn for suspicious use of integer values where boolean values are expected, such as conditional expressions (?:) using non-boolean integer constants in boolean context, like "if (a <= b ? 2 : 3)". Or left shifting of signed integers in boolean context, like "for (a = 0; 1 << a; a++);". Likewise for all kinds of multiplications regardless of the data type. This warning is enabled by -Wall.
- -Wno-int-to-pointer-cast
-
Suppress warnings from casts to pointer type of an integer of a
different size. In C++, casting to a pointer type of smaller size is an error. Wint-to-pointer-cast is enabled by default.
- -Wno-pointer-to-int-cast (C and Objective-C only)
- Suppress warnings from casts from a pointer to an integer type of a different size.
- -Winvalid-pch
- Warn if a precompiled header is found in the search path but cannot be used.
- -Wlong-long
-
Warn if "long long" type is used. This is enabled by either
-Wpedantic or -Wtraditional in ISO C90and C++98 modes. To inhibit the warning messages, use -Wno-long-long.
- -Wvariadic-macros
-
Warn if variadic macros are used in ISO C90mode, or if theGNUalternate syntax is used inISO C99mode. This is enabled by either -Wpedantic or -Wtraditional. To inhibit the warning messages, use -Wno-variadic-macros.
- -Wvarargs
- Warn upon questionable usage of the macros used to handle variable arguments like "va_start". This is default. To inhibit the warning messages, use -Wno-varargs.
- -Wvector-operation-performance
-
Warn if vector operation is not implemented via SIMDcapabilities of the architecture. Mainly useful for the performance tuning. Vector operation can be implemented "piecewise", which means that the scalar operation is performed on every vector element; "in parallel", which means that the vector operation is implemented using scalars of wider type, which normally is more performance efficient; and "as a single scalar", which means that vector fits into a scalar type.
- -Wno-virtual-move-assign
-
Suppress warnings about inheriting from a virtual base with a
non-trivial C++11 move assignment operator. This is dangerous because if the virtual base is reachable along more than one path, it is moved multiple times, which can mean both objects end up in the moved-from state. If the move assignment operator is written to avoid moving from a moved-from object, this warning can be disabled.
- -Wvla
- Warn if a variable-length array is used in the code. -Wno-vla prevents the -Wpedantic warning of the variable-length array.
- -Wvla-larger-than=n
-
If this option is used, the compiler will warn on uses of
variable-length arrays where the size is either unbounded, or bounded
by an argument that can be larger than n bytes. This is similar
to how -Walloca-larger-than=n works, but with
variable-length arrays.
Note that
GCCmay optimize small variable-length arrays of a known value into plain arrays, so this warning may not get triggered for such arrays.This warning is not enabled by -Wall, and is only active when -ftree-vrp is active (default for -O2 and above).
See also -Walloca-larger-than=n.
- -Wvolatile-register-var
- Warn if a register variable is declared volatile. The volatile modifier does not inhibit all optimizations that may eliminate reads and/or writes to register variables. This warning is enabled by -Wall.
- -Wdisabled-optimization
-
Warn if a requested optimization pass is disabled. This warning does
not generally indicate that there is anything wrong with your code; it
merely indicates that GCC's optimizers are unable to handle the code effectively. Often, the problem is that your code is too big or too complex;GCCrefuses to optimize programs when the optimization itself is likely to take inordinate amounts of time.
- -Wpointer-sign (C and Objective-C only)
- Warn for pointer argument passing or assignment with different signedness. This option is only supported for C and Objective-C. It is implied by -Wall and by -Wpedantic, which can be disabled with -Wno-pointer-sign.
- -Wstack-protector
- This option is only active when -fstack-protector is active. It warns about functions that are not protected against stack smashing.
- -Woverlength-strings
-
Warn about string constants that are longer than the ``minimum
maximum'' length specified in the C standard. Modern compilers
generally allow string constants that are much longer than the
standard's minimum limit, but very portable programs should avoid
using longer strings.
The limit applies after string constant concatenation, and does not count the trailing
NUL.In C90, the limit was 509 characters; in C99, it was raised to 4095. C++98 does not specify a normative minimum maximum, so we do not diagnose overlength strings in C++.This option is implied by -Wpedantic, and can be disabled with -Wno-overlength-strings.
- -Wunsuffixed-float-constants (C and Objective-C only)
- Issue a warning for any floating constant that does not have a suffix. When used together with -Wsystem-headers it warns about such constants in system header files. This can be useful when preparing code to use with the "FLOAT_CONST_DECIMAL64" pragma from the decimal floating-point extension to C99.
- -Wno-designated-init (C and Objective-C only)
- Suppress warnings when a positional initializer is used to initialize a structure that has been marked with the "designated_init" attribute.
- -Whsa
-
Issue a warning when HSAILcannot be emitted for the compiled function or OpenMP construct.
Options for Debugging Your Program
To tell
If you are not using some other optimization option, consider using -Og with -g. With no -O option at all, some compiler passes that collect information useful for debugging do not run at all, so that -Og may result in a better debugging experience.
- -g
-
Produce debugging information in the operating system's native format
(stabs, COFF, XCOFF,orDWARF).GDBcan work with this debugging information.
On most systems that use stabs format, -g enables use of extra debugging information that only
GDBcan use; this extra information makes debugging work better inGDBbut probably makes other debuggers crash or refuse to read the program. If you want to control for certain whether to generate the extra information, use -gstabs+, -gstabs, -gxcoff+, -gxcoff, or -gvms (see below). - -ggdb
-
Produce debugging information for use by GDB.This means to use the most expressive format available (DWARF,stabs, or the native format if neither of those are supported), includingGDBextensions if at all possible.
- -gdwarf
- -gdwarf-version
-
Produce debugging information in DWARFformat (if that is supported). The value of version may be either 2, 3, 4 or 5; the default version for most targets is 4.DWARFVersion 5 is only experimental.
Note that with
DWARFVersion 2, some ports require and always use some non-conflictingDWARF 3extensions in the unwind tables.Version 4 may require
GDB 7.0and -fvar-tracking-assignments for maximum benefit.GCCno longer supportsDWARFVersion 1, which is substantially different than Version 2 and later. For historical reasons, some other DWARF-related options (including -feliminate-dwarf2-dups and -fno-dwarf2-cfi-asm) retain a reference toDWARFVersion 2 in their names, but apply to all currently-supported versions ofDWARF. - -gstabs
-
Produce debugging information in stabs format (if that is supported),
without GDBextensions. This is the format used byDBXon mostBSDsystems. OnMIPS,Alpha and System V Release 4 systems this option produces stabs debugging output that is not understood byDBXorSDB.On System V Release 4 systems this option requires theGNUassembler.
- -gstabs+
-
Produce debugging information in stabs format (if that is supported),
using GNUextensions understood only by theGNUdebugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program.
- -gcoff
-
Produce debugging information in COFFformat (if that is supported). This is the format used bySDBon most System V systems prior to System V Release 4.
- -gxcoff
-
Produce debugging information in XCOFFformat (if that is supported). This is the format used by theDBXdebugger onIBM RS/6000systems.
- -gxcoff+
-
Produce debugging information in XCOFFformat (if that is supported), usingGNUextensions understood only by theGNUdebugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program, and may cause assemblers other than theGNUassembler (GAS) to fail with an error.
- -gvms
-
Produce debugging information in Alpha/VMS debug format (if that is
supported). This is the format used by DEBUGon Alpha/VMS systems.
- -glevel
- -ggdblevel
- -gstabslevel
- -gcofflevel
- -gxcofflevel
- -gvmslevel
-
Request debugging information and also use level to specify how
much information. The default level is 2.
Level 0 produces no debug information at all. Thus, -g0 negates -g.
Level 1 produces minimal information, enough for making backtraces in parts of the program that you don't plan to debug. This includes descriptions of functions and external variables, and line number tables, but no information about local variables.
Level 3 includes extra information, such as all the macro definitions present in the program. Some debuggers support macro expansion when you use -g3.
-gdwarf does not accept a concatenated debug level, to avoid confusion with -gdwarf-level. Instead use an additional -glevel option to change the debug level for
DWARF. - -feliminate-unused-debug-symbols
- Produce debugging information in stabs format (if that is supported), for only symbols that are actually used.
- -femit-class-debug-always
-
Instead of emitting debugging information for a C++class in only one object file, emit it in all object files using the class. This option should be used only with debuggers that are unable to handle the wayGCCnormally emits debugging information for classes because using this option increases the size of debugging information by as much as a factor of two.
- -fno-merge-debug-strings
- Direct the linker to not merge together strings in the debugging information that are identical in different object files. Merging is not supported by all assemblers or linkers. Merging decreases the size of the debug information in the output file at the cost of increasing link processing time. Merging is enabled by default.
- -fdebug-prefix-map=old=new
- When compiling files in directory old, record debugging information describing them as in new instead.
- -fvar-tracking
-
Run variable tracking pass. It computes where variables are stored at each
position in code. Better debugging information is then generated
(if the debugging information format supports this information).
It is enabled by default when compiling with optimization (-Os, -O, -O2, ...), debugging information (-g) and the debug info format supports it.
- -fvar-tracking-assignments
-
Annotate assignments to user variables early in the compilation and
attempt to carry the annotations over throughout the compilation all the
way to the end, in an attempt to improve debug information while
optimizing. Use of -gdwarf-4 is recommended along with it.
It can be enabled even if var-tracking is disabled, in which case annotations are created and maintained, but discarded at the end. By default, this flag is enabled together with -fvar-tracking, except when selective scheduling is enabled.
- -gsplit-dwarf
-
Separate as much DWARFdebugging information as possible into a separate output file with the extension .dwo. This option allows the build system to avoid linking files with debug information. To be useful, this option requires a debugger capable of reading .dwo files.
- -gpubnames
-
Generate DWARF".debug_pubnames" and ".debug_pubtypes" sections.
- -ggnu-pubnames
-
Generate ".debug_pubnames" and ".debug_pubtypes" sections in a format
suitable for conversion into a GDBindex. This option is only useful with a linker that can produceGDBindex version 7.
- -fdebug-types-section
-
When using DWARFVersion 4 or higher, type DIEs can be put into their own ".debug_types" section instead of making them part of the ".debug_info" section. It is more efficient to put them in a separate comdat sections since the linker can then remove duplicates. But not allDWARFconsumers support ".debug_types" sections yet and on some objects ".debug_types" produces larger instead of smaller debugging information.
- -grecord-gcc-switches
- -gno-record-gcc-switches
-
This switch causes the command-line options used to invoke the
compiler that may affect code generation to be appended to the
DW_AT_producer attribute in DWARFdebugging information. The options are concatenated with spaces separating them from each other and from the compiler version. It is enabled by default. See also -frecord-gcc-switches for another way of storing compiler options into the object file.
- -gstrict-dwarf
-
Disallow using extensions of later DWARFstandard version than selected with -gdwarf-version. On most targets using non-conflictingDWARFextensions from later standard versions is allowed.
- -gno-strict-dwarf
-
Allow using extensions of later DWARFstandard version than selected with -gdwarf-version.
- -gcolumn-info
- -gno-column-info
-
Emit location column information into DWARFdebugging information, rather than just file and line. This option is disabled by default.
- -gz[=type]
-
Produce compressed debug sections in DWARFformat, if that is supported. If type is not given, the default type depends on the capabilities of the assembler and linker used. type may be one of none (don't compress debug sections), zlib (use zlib compression inELFgABI format), or zlib-gnu (use zlib compression in traditionalGNUformat). If the linker doesn't support writing compressed debug sections, the option is rejected. Otherwise, if the assembler does not support them, -gz is silently ignored when producing object files.
- -feliminate-dwarf2-dups
-
Compress DWARFdebugging information by eliminating duplicated information about each symbol. This option only makes sense when generatingDWARFdebugging information.
- -femit-struct-debug-baseonly
-
Emit debug information for struct-like types
only when the base name of the compilation source file
matches the base name of file in which the struct is defined.
This option substantially reduces the size of debugging information, but at significant potential loss in type information to the debugger. See -femit-struct-debug-reduced for a less aggressive option. See -femit-struct-debug-detailed for more detailed control.
This option works only with
DWARFdebug output. - -femit-struct-debug-reduced
-
Emit debug information for struct-like types
only when the base name of the compilation source file
matches the base name of file in which the type is defined,
unless the struct is a template or defined in a system header.
This option significantly reduces the size of debugging information, with some potential loss in type information to the debugger. See -femit-struct-debug-baseonly for a more aggressive option. See -femit-struct-debug-detailed for more detailed control.
This option works only with
DWARFdebug output. - -femit-struct-debug-detailed[=spec-list]
-
Specify the struct-like types
for which the compiler generates debug information.
The intent is to reduce duplicate struct debug information
between different object files within the same program.
This option is a detailed version of -femit-struct-debug-reduced and -femit-struct-debug-baseonly, which serves for most needs.
A specification has the syntax[dir:|ind:][ord:|gen:](any|sys|base|none)
The optional first word limits the specification to structs that are used directly (dir:) or used indirectly (ind:). A struct type is used directly when it is the type of a variable, member. Indirect uses arise through pointers to structs. That is, when use of an incomplete struct is valid, the use is indirect. An example is struct one direct; struct two * indirect;.
The optional second word limits the specification to ordinary structs (ord:) or generic structs (gen:). Generic structs are a bit complicated to explain. For C
++, these are non-explicit specializations of template classes, or non-template classes within the above. Other programming languages have generics, but -femit-struct-debug-detailed does not yet implement them.The third word specifies the source files for those structs for which the compiler should emit debug information. The values none and any have the normal meaning. The value base means that the base of name of the file in which the type declaration appears must match the base of the name of the main compilation file. In practice, this means that when compiling foo.c, debug information is generated for types declared in that file and foo.h, but not other header files. The value sys means those types satisfying base or declared in system or compiler headers.
You may need to experiment to determine the best settings for your application.
The default is -femit-struct-debug-detailed=all.
This option works only with
DWARFdebug output. - -fno-dwarf2-cfi-asm
-
Emit DWARFunwind info as compiler generated ".eh_frame" section instead of usingGAS".cfi_*" directives.
- -fno-eliminate-unused-debug-types
-
Normally, when producing DWARFoutput,GCCavoids producing debug symbol output for types that are nowhere used in the source file being compiled. Sometimes it is useful to haveGCCemit debugging information for all types declared in a compilation unit, regardless of whether or not they are actually used in that compilation unit, for example if, in the debugger, you want to cast a value to a type that is not actually used in your program (but is declared). More often, however, this results in a significant amount of wasted space.
Options That Control Optimization
These options control various sorts of optimizations.Without any optimization option, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you expect from the source code.
Turning on optimization flags makes the compiler attempt to improve the performance and/or code size at the expense of compilation time and possibly the ability to debug the program.
The compiler performs optimization based on the knowledge it has of the program. Compiling multiple files at once to a single output file mode allows the compiler to use information gained from all of the files when compiling each of them.
Not all optimizations are controlled directly by a flag. Only optimizations that have a flag are listed in this section.
Most optimizations are only enabled if an -O level is set on the command line. Otherwise they are disabled, even if individual optimization flags are specified.
Depending on the target and how
- -O
- -O1
-
Optimize. Optimizing compilation takes somewhat more time, and a lot
more memory for a large function.
With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of compilation time.
-O turns on the following optimization flags:
-fauto-inc-dec -fbranch-count-reg -fcombine-stack-adjustments -fcompare-elim -fcprop-registers -fdce -fdefer-pop -fdelayed-branch -fdse -fforward-propagate -fguess-branch-probability -fif-conversion2 -fif-conversion -finline-functions-called-once -fipa-pure-const -fipa-profile -fipa-reference -fmerge-constants -fmove-loop-invariants -freorder-blocks -fshrink-wrap -fshrink-wrap-separate -fsplit-wide-types -fssa-backprop -fssa-phiopt -ftree-bit-ccp -ftree-ccp -ftree-ch -ftree-coalesce-vars -ftree-copy-prop -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-forwprop -ftree-fre -ftree-phiprop -ftree-sink -ftree-slsr -ftree-sra -ftree-pta -ftree-ter -funit-at-a-time
-O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging.
- -O2
-
Optimize even more. GCCperforms nearly all supported optimizations that do not involve a space-speed tradeoff. As compared to -O, this option increases both compilation time and the performance of the generated code.
-O2 turns on all optimization flags specified by -O. It also turns on the following optimization flags: -fthread-jumps -falign-functions -falign-jumps -falign-loops -falign-labels -fcaller-saves -fcrossjumping -fcse-follow-jumps -fcse-skip-blocks -fdelete-null-pointer-checks -fdevirtualize -fdevirtualize-speculatively -fexpensive-optimizations -fgcse -fgcse-lm -fhoist-adjacent-loads -finline-small-functions -findirect-inlining -fipa-cp -fipa-bit-cp -fipa-vrp -fipa-sra -fipa-icf -fisolate-erroneous-paths-dereference -flra-remat -foptimize-sibling-calls -foptimize-strlen -fpartial-inlining -fpeephole2 -freorder-blocks-algorithm=stc -freorder-blocks-and-partition -freorder-functions -frerun-cse-after-loop -fsched-interblock -fsched-spec -fschedule-insns -fschedule-insns2 -fstore-merging -fstrict-aliasing -fstrict-overflow -ftree-builtin-call-dce -ftree-switch-conversion -ftree-tail-merge -fcode-hoisting -ftree-pre -ftree-vrp -fipa-ra
Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos.
NOTE:In Ubuntu 8.10 and later versions, -D_FORTIFY_SOURCE=2 is set by default, and is activated when -O is set to 2 or higher. This enables additional compile-time and run-time checks for several libc functions. To disable, specify either -U_FORTIFY_SOURCE or -D_FORTIFY_SOURCE=0. - -O3
- Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops, -fpredictive-commoning, -fgcse-after-reload, -ftree-loop-vectorize, -ftree-loop-distribute-patterns, -fsplit-paths -ftree-slp-vectorize, -fvect-cost-model, -ftree-partial-pre, -fpeel-loops and -fipa-cp-clone options.
- -O0
- Reduce compilation time and make debugging produce the expected results. This is the default.
- -Os
-
Optimize for size. -Os enables all -O2 optimizations that
do not typically increase code size. It also performs further
optimizations designed to reduce code size.
-Os disables the following optimization flags: -falign-functions -falign-jumps -falign-loops -falign-labels -freorder-blocks -freorder-blocks-algorithm=stc -freorder-blocks-and-partition -fprefetch-loop-arrays
- -Ofast
- Disregard strict standards compliance. -Ofast enables all -O3 optimizations. It also enables optimizations that are not valid for all standard-compliant programs. It turns on -ffast-math and the Fortran-specific -fno-protect-parens and -fstack-arrays.
- -Og
- Optimize debugging experience. -Og enables optimizations that do not interfere with debugging. It should be the optimization level of choice for the standard edit-compile-debug cycle, offering a reasonable level of optimization while maintaining fast compilation and a good debugging experience.
If you use multiple -O options, with or without level numbers, the last such option is the one that is effective.
Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo is -fno-foo. In the table below, only one of the forms is listed---the one you typically use. You can figure out the other form by either removing no- or adding it.
The following options control specific optimizations. They are either activated by -O options or are related to ones that are. You can use the following flags in the rare cases when ``fine-tuning'' of optimizations to be performed is desired.
- -fno-defer-pop
-
Always pop the arguments to each function call as soon as that function
returns. For machines that must pop arguments after a function call,
the compiler normally lets arguments accumulate on the stack for several
function calls and pops them all at once.
Disabled at levels -O, -O2, -O3, -Os.
- -fforward-propagate
-
Perform a forward propagation pass on RTL.The pass tries to combine two instructions and checks if the result can be simplified. If loop unrolling is active, two passes are performed and the second is scheduled after loop unrolling.
This option is enabled by default at optimization levels -O, -O2, -O3, -Os.
- -ffp-contract=style
-
-ffp-contract=off disables floating-point expression contraction.
-ffp-contract=fast enables floating-point expression contraction
such as forming of fused multiply-add operations if the target has
native support for them.
-ffp-contract=on enables floating-point expression contraction
if allowed by the language standard. This is currently not implemented
and treated equal to -ffp-contract=off.
The default is -ffp-contract=fast.
- -fomit-frame-pointer
-
Don't keep the frame pointer in a register for functions that
don't need one. This avoids the instructions to save, set up and
restore frame pointers; it also makes an extra register available
in many functions. It also makes debugging impossible on
some machines.
On some machines, such as the
VAX,this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro "FRAME_POINTER_REQUIRED" controls whether a target machine supports this flag.The default setting (when not optimizing for size) for 32-bit GNU/Linux x86 and 32-bit Darwin x86 targets is -fomit-frame-pointer. You can configure
GCCwith the --enable-frame-pointer configure option to change the default.Enabled at levels -O, -O2, -O3, -Os.
- -foptimize-sibling-calls
-
Optimize sibling and tail recursive calls.
Enabled at levels -O2, -O3, -Os.
- -foptimize-strlen
-
Optimize various standard C string functions (e.g. "strlen",
"strchr" or "strcpy") and
their "_FORTIFY_SOURCE" counterparts into faster alternatives.
Enabled at levels -O2, -O3.
- -fno-inline
-
Do not expand any functions inline apart from those marked with
the "always_inline" attribute. This is the default when not
optimizing.
Single functions can be exempted from inlining by marking them with the "noinline" attribute.
- -finline-small-functions
-
Integrate functions into their callers when their body is smaller than expected
function call code (so overall size of program gets smaller). The compiler
heuristically decides which functions are simple enough to be worth integrating
in this way. This inlining applies to all functions, even those not declared
inline.
Enabled at level -O2.
- -findirect-inlining
-
Inline also indirect calls that are discovered to be known at compile
time thanks to previous inlining. This option has any effect only
when inlining itself is turned on by the -finline-functions
or -finline-small-functions options.
Enabled at level -O2.
- -finline-functions
-
Consider all functions for inlining, even if they are not declared inline.
The compiler heuristically decides which functions are worth integrating
in this way.
If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as assembler code in its own right.
Enabled at level -O3.
- -finline-functions-called-once
-
Consider all "static" functions called once for inlining into their
caller even if they are not marked "inline". If a call to a given
function is integrated, then the function is not output as assembler code
in its own right.
Enabled at levels -O1, -O2, -O3 and -Os.
- -fearly-inlining
-
Inline functions marked by "always_inline" and functions whose body seems
smaller than the function call overhead early before doing
-fprofile-generate instrumentation and real inlining pass. Doing so
makes profiling significantly cheaper and usually inlining faster on programs
having large chains of nested wrapper functions.
Enabled by default.
- -fipa-sra
-
Perform interprocedural scalar replacement of aggregates, removal of
unused parameters and replacement of parameters passed by reference
by parameters passed by value.
Enabled at levels -O2, -O3 and -Os.
- -finline-limit=n
-
By default, GCClimits the size of functions that can be inlined. This flag allows coarse control of this limit. n is the size of functions that can be inlined in number of pseudo instructions.
Inlining is actually controlled by a number of parameters, which may be specified individually by using --param name=value. The -finline-limit=n option sets some of these parameters as follows:
-
- max-inline-insns-single
- is set to n/2.
- max-inline-insns-auto
- is set to n/2.
-
See below for a documentation of the individual parameters controlling inlining and for the defaults of these parameters.
Note: there may be no value to -finline-limit that results in default behavior.
Note: pseudo instruction represents, in this particular context, an abstract measurement of function's size. In no way does it represent a count of assembly instructions and as such its exact meaning might change from one release to an another.
-
- -fno-keep-inline-dllexport
- This is a more fine-grained version of -fkeep-inline-functions, which applies only to functions that are declared using the "dllexport" attribute or declspec.
- -fkeep-inline-functions
-
In C, emit "static" functions that are declared "inline"
into the object file, even if the function has been inlined into all
of its callers. This switch does not affect functions using the
"extern inline" extension in GNU C90.In C++, emit any and all inline functions into the object file.
- -fkeep-static-functions
- Emit "static" functions into the object file, even if the function is never used.
- -fkeep-static-consts
-
Emit variables declared "static const" when optimization isn't turned
on, even if the variables aren't referenced.
GCCenables this option by default. If you want to force the compiler to check if a variable is referenced, regardless of whether or not optimization is turned on, use the -fno-keep-static-consts option.
- -fmerge-constants
-
Attempt to merge identical constants (string constants and floating-point
constants) across compilation units.
This option is the default for optimized compilation if the assembler and linker support it. Use -fno-merge-constants to inhibit this behavior.
Enabled at levels -O, -O2, -O3, -Os.
- -fmerge-all-constants
-
Attempt to merge identical constants and identical variables.
This option implies -fmerge-constants. In addition to -fmerge-constants this considers e.g. even constant initialized arrays or initialized constant variables with integral or floating-point types. Languages like C or C
++require each variable, including multiple instances of the same variable in recursive calls, to have distinct locations, so using this option results in non-conforming behavior. - -fmodulo-sched
- Perform swing modulo scheduling immediately before the first scheduling pass. This pass looks at innermost loops and reorders their instructions by overlapping different iterations.
- -fmodulo-sched-allow-regmoves
- Perform more aggressive SMS-based modulo scheduling with register moves allowed. By setting this flag certain anti-dependences edges are deleted, which triggers the generation of reg-moves based on the life-range analysis. This option is effective only with -fmodulo-sched enabled.
- -fno-branch-count-reg
-
Avoid running a pass scanning for opportunities to use ``decrement and
branch'' instructions on a count register instead of generating sequences
of instructions that decrement a register, compare it against zero, and
then branch based upon the result. This option is only meaningful on
architectures that support such instructions, which include x86, PowerPC,
IA-64and S/390. Note that the -fno-branch-count-reg option doesn't remove the decrement and branch instructions from the generated instruction stream introduced by other optimization passes.
Enabled by default at -O1 and higher.
The default is -fbranch-count-reg.
- -fno-function-cse
-
Do not put function addresses in registers; make each instruction that
calls a constant function contain the function's address explicitly.
This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used.
The default is -ffunction-cse
- -fno-zero-initialized-in-bss
-
If the target supports a BSSsection,GCCby default puts variables that are initialized to zero intoBSS.This can save space in the resulting code.
This option turns off this behavior because some programs explicitly rely on variables going to the data section---e.g., so that the resulting executable can find the beginning of that section and/or make assumptions based on that.
The default is -fzero-initialized-in-bss.
- -fthread-jumps
-
Perform optimizations that check to see if a jump branches to a
location where another comparison subsumed by the first is found. If
so, the first branch is redirected to either the destination of the
second branch or a point immediately following it, depending on whether
the condition is known to be true or false.
Enabled at levels -O2, -O3, -Os.
- -fsplit-wide-types
-
When using a type that occupies multiple registers, such as "long
long" on a 32-bit system, split the registers apart and allocate them
independently. This normally generates better code for those types,
but may make debugging more difficult.
Enabled at levels -O, -O2, -O3, -Os.
- -fcse-follow-jumps
-
In common subexpression elimination (CSE), scan through jump instructions when the target of the jump is not reached by any other path. For example, whenCSEencounters an "if" statement with an "else" clause,CSEfollows the jump when the condition tested is false.
Enabled at levels -O2, -O3, -Os.
- -fcse-skip-blocks
-
This is similar to -fcse-follow-jumps, but causes CSEto follow jumps that conditionally skip over blocks. WhenCSEencounters a simple "if" statement with no else clause, -fcse-skip-blocks causesCSEto follow the jump around the body of the "if".
Enabled at levels -O2, -O3, -Os.
- -frerun-cse-after-loop
-
Re-run common subexpression elimination after loop optimizations are
performed.
Enabled at levels -O2, -O3, -Os.
- -fgcse
-
Perform a global common subexpression elimination pass.
This pass also performs global constant and copy propagation.
Note: When compiling a program using computed gotos, a
GCCextension, you may get better run-time performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line.Enabled at levels -O2, -O3, -Os.
- -fgcse-lm
-
When -fgcse-lm is enabled, global common subexpression elimination
attempts to move loads that are only killed by stores into themselves. This
allows a loop containing a load/store sequence to be changed to a load outside
the loop, and a copy/store within the loop.
Enabled by default when -fgcse is enabled.
- -fgcse-sm
-
When -fgcse-sm is enabled, a store motion pass is run after
global common subexpression elimination. This pass attempts to move
stores out of loops. When used in conjunction with -fgcse-lm,
loops containing a load/store sequence can be changed to a load before
the loop and a store after the loop.
Not enabled at any optimization level.
- -fgcse-las
-
When -fgcse-las is enabled, the global common subexpression
elimination pass eliminates redundant loads that come after stores to the
same memory location (both partial and full redundancies).
Not enabled at any optimization level.
- -fgcse-after-reload
- When -fgcse-after-reload is enabled, a redundant load elimination pass is performed after reload. The purpose of this pass is to clean up redundant spilling.
- -faggressive-loop-optimizations
- This option tells the loop optimizer to use language constraints to derive bounds for the number of iterations of a loop. This assumes that loop code does not invoke undefined behavior by for example causing signed integer overflows or out-of-bound array accesses. The bounds for the number of iterations of a loop are used to guide loop unrolling and peeling and loop exit test optimizations. This option is enabled by default.
- -funconstrained-commons
- This option tells the compiler that variables declared in common blocks (e.g. Fortran) may later be overridden with longer trailing arrays. This prevents certain optimizations that depend on knowing the array bounds.
- -fcrossjumping
-
Perform cross-jumping transformation.
This transformation unifies equivalent code and saves code size. The
resulting code may or may not perform better than without cross-jumping.
Enabled at levels -O2, -O3, -Os.
- -fauto-inc-dec
- Combine increments or decrements of addresses with memory accesses. This pass is always skipped on architectures that do not have instructions to support this. Enabled by default at -O and higher on architectures that support this.
- -fdce
-
Perform dead code elimination (DCE) onRTL.Enabled by default at -O and higher.
- -fdse
-
Perform dead store elimination (DSE) onRTL.Enabled by default at -O and higher.
- -fif-conversion
-
Attempt to transform conditional jumps into branch-less equivalents. This
includes use of conditional moves, min, max, set flags and abs instructions, and
some tricks doable by standard arithmetics. The use of conditional execution
on chips where it is available is controlled by -fif-conversion2.
Enabled at levels -O, -O2, -O3, -Os.
- -fif-conversion2
-
Use conditional execution (where available) to transform conditional jumps into
branch-less equivalents.
Enabled at levels -O, -O2, -O3, -Os.
- -fdeclone-ctor-dtor
-
The C++ABIrequires multiple entry points for constructors and destructors: one for a base subobject, one for a complete object, and one for a virtual destructor that calls operator delete afterwards. For a hierarchy with virtual bases, the base and complete variants are clones, which means two copies of the function. With this option, the base and complete variants are changed to be thunks that call a common implementation.
Enabled by -Os.
- -fdelete-null-pointer-checks
-
Assume that programs cannot safely dereference null pointers, and that
no code or data element resides at address zero.
This option enables simple constant
folding optimizations at all optimization levels. In addition, other
optimization passes in GCCuse this flag to control global dataflow analyses that eliminate useless checks for null pointers; these assume that a memory access to address zero always results in a trap, so that if a pointer is checked after it has already been dereferenced, it cannot be null.
Note however that in some environments this assumption is not true. Use -fno-delete-null-pointer-checks to disable this optimization for programs that depend on that behavior.
This option is enabled by default on most targets. On Nios
II ELF,it defaults to off. OnAVRandCR16,this option is completely disabled.Passes that use the dataflow information are enabled independently at different optimization levels.
- -fdevirtualize
- Attempt to convert calls to virtual functions to direct calls. This is done both within a procedure and interprocedurally as part of indirect inlining (-findirect-inlining) and interprocedural constant propagation (-fipa-cp). Enabled at levels -O2, -O3, -Os.
- -fdevirtualize-speculatively
- Attempt to convert calls to virtual functions to speculative direct calls. Based on the analysis of the type inheritance graph, determine for a given call the set of likely targets. If the set is small, preferably of size 1, change the call into a conditional deciding between direct and indirect calls. The speculative calls enable more optimizations, such as inlining. When they seem useless after further optimization, they are converted back into original form.
- -fdevirtualize-at-ltrans
- Stream extra information needed for aggressive devirtualization when running the link-time optimizer in local transformation mode. This option enables more devirtualization but significantly increases the size of streamed data. For this reason it is disabled by default.
- -fexpensive-optimizations
-
Perform a number of minor optimizations that are relatively expensive.
Enabled at levels -O2, -O3, -Os.
- -free
-
Attempt to remove redundant extension instructions. This is especially
helpful for the x86-64 architecture, which implicitly zero-extends in 64-bit
registers after writing to their lower 32-bit half.
Enabled for Alpha, AArch64 and x86 at levels -O2, -O3, -Os.
- -fno-lifetime-dse
-
In C++the value of an object is only affected by changes within its lifetime: when the constructor begins, the object has an indeterminate value, and any changes during the lifetime of the object are dead when the object is destroyed. Normally dead store elimination will take advantage of this; if your code relies on the value of the object storage persisting beyond the lifetime of the object, you can use this flag to disable this optimization. To preserve stores before the constructor starts (e.g. because your operator new clears the object storage) but still treat the object as dead after the destructor you, can use -flifetime-dse=1. The default behavior can be explicitly selected with -flifetime-dse=2. -flifetime-dse=0 is equivalent to -fno-lifetime-dse.
- -flive-range-shrinkage
- Attempt to decrease register pressure through register live range shrinkage. This is helpful for fast processors with small or moderate size register sets.
- -fira-algorithm=algorithm
-
Use the specified coloring algorithm for the integrated register
allocator. The algorithm argument can be priority, which
specifies Chow's priority coloring, or CB, which specifies Chaitin-Briggs coloring. Chaitin-Briggs coloring is not implemented for all architectures, but for those targets that do support it, it is the default because it generates better code.
- -fira-region=region
-
Use specified regions for the integrated register allocator. The
region argument should be one of the following:
-
- all
- Use all loops as register allocation regions. This can give the best results for machines with a small and/or irregular register set.
- mixed
- Use all loops except for loops with small register pressure as the regions. This value usually gives the best results in most cases and for most architectures, and is enabled by default when compiling with optimization for speed (-O, -O2, ...).
- one
- Use all functions as a single region. This typically results in the smallest code size, and is enabled by default for -Os or -O0.
-
- -fira-hoist-pressure
-
Use IRAto evaluate register pressure in the code hoisting pass for decisions to hoist expressions. This option usually results in smaller code, but it can slow the compiler down.
This option is enabled at level -Os for all targets.
- -fira-loop-pressure
-
Use IRAto evaluate register pressure in loops for decisions to move loop invariants. This option usually results in generation of faster and smaller code on machines with large register files (>= 32 registers), but it can slow the compiler down.
This option is enabled at level -O3 for some targets.
- -fno-ira-share-save-slots
- Disable sharing of stack slots used for saving call-used hard registers living through a call. Each hard register gets a separate stack slot, and as a result function stack frames are larger.
- -fno-ira-share-spill-slots
- Disable sharing of stack slots allocated for pseudo-registers. Each pseudo-register that does not get a hard register gets a separate stack slot, and as a result function stack frames are larger.
- -flra-remat
-
Enable CFG-sensitive rematerialization in LRA.Instead of loading values of spilled pseudos,LRAtries to rematerialize (recalculate) values if it is profitable.
Enabled at levels -O2, -O3, -Os.
- -fdelayed-branch
-
If supported for the target machine, attempt to reorder instructions
to exploit instruction slots available after delayed branch
instructions.
Enabled at levels -O, -O2, -O3, -Os.
- -fschedule-insns
-
If supported for the target machine, attempt to reorder instructions to
eliminate execution stalls due to required data being unavailable. This
helps machines that have slow floating point or memory load instructions
by allowing other instructions to be issued until the result of the load
or floating-point instruction is required.
Enabled at levels -O2, -O3.
- -fschedule-insns2
-
Similar to -fschedule-insns, but requests an additional pass of
instruction scheduling after register allocation has been done. This is
especially useful on machines with a relatively small number of
registers and where memory load instructions take more than one cycle.
Enabled at levels -O2, -O3, -Os.
- -fno-sched-interblock
- Don't schedule instructions across basic blocks. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
- -fno-sched-spec
- Don't allow speculative motion of non-load instructions. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
- -fsched-pressure
- Enable register pressure sensitive insn scheduling before register allocation. This only makes sense when scheduling before register allocation is enabled, i.e. with -fschedule-insns or at -O2 or higher. Usage of this option can improve the generated code and decrease its size by preventing register pressure increase above the number of available hard registers and subsequent spills in register allocation.
- -fsched-spec-load
- Allow speculative motion of some load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
- -fsched-spec-load-dangerous
- Allow speculative motion of more load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
- -fsched-stalled-insns
- -fsched-stalled-insns=n
- Define how many insns (if any) can be moved prematurely from the queue of stalled insns into the ready list during the second scheduling pass. -fno-sched-stalled-insns means that no insns are moved prematurely, -fsched-stalled-insns=0 means there is no limit on how many queued insns can be moved prematurely. -fsched-stalled-insns without a value is equivalent to -fsched-stalled-insns=1.
- -fsched-stalled-insns-dep
- -fsched-stalled-insns-dep=n
- Define how many insn groups (cycles) are examined for a dependency on a stalled insn that is a candidate for premature removal from the queue of stalled insns. This has an effect only during the second scheduling pass, and only if -fsched-stalled-insns is used. -fno-sched-stalled-insns-dep is equivalent to -fsched-stalled-insns-dep=0. -fsched-stalled-insns-dep without a value is equivalent to -fsched-stalled-insns-dep=1.
- -fsched2-use-superblocks
-
When scheduling after register allocation, use superblock scheduling.
This allows motion across basic block boundaries,
resulting in faster schedules. This option is experimental, as not all machine
descriptions used by GCCmodel theCPUclosely enough to avoid unreliable results from the algorithm.
This only makes sense when scheduling after register allocation, i.e. with -fschedule-insns2 or at -O2 or higher.
- -fsched-group-heuristic
- Enable the group heuristic in the scheduler. This heuristic favors the instruction that belongs to a schedule group. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -fsched-critical-path-heuristic
- Enable the critical-path heuristic in the scheduler. This heuristic favors instructions on the critical path. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -fsched-spec-insn-heuristic
- Enable the speculative instruction heuristic in the scheduler. This heuristic favors speculative instructions with greater dependency weakness. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -fsched-rank-heuristic
- Enable the rank heuristic in the scheduler. This heuristic favors the instruction belonging to a basic block with greater size or frequency. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -fsched-last-insn-heuristic
- Enable the last-instruction heuristic in the scheduler. This heuristic favors the instruction that is less dependent on the last instruction scheduled. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -fsched-dep-count-heuristic
- Enable the dependent-count heuristic in the scheduler. This heuristic favors the instruction that has more instructions depending on it. This is enabled by default when scheduling is enabled, i.e. with -fschedule-insns or -fschedule-insns2 or at -O2 or higher.
- -freschedule-modulo-scheduled-loops
- Modulo scheduling is performed before traditional scheduling. If a loop is modulo scheduled, later scheduling passes may change its schedule. Use this option to control that behavior.
- -fselective-scheduling
- Schedule instructions using selective scheduling algorithm. Selective scheduling runs instead of the first scheduler pass.
- -fselective-scheduling2
- Schedule instructions using selective scheduling algorithm. Selective scheduling runs instead of the second scheduler pass.
- -fsel-sched-pipelining
- Enable software pipelining of innermost loops during selective scheduling. This option has no effect unless one of -fselective-scheduling or -fselective-scheduling2 is turned on.
- -fsel-sched-pipelining-outer-loops
- When pipelining loops during selective scheduling, also pipeline outer loops. This option has no effect unless -fsel-sched-pipelining is turned on.
- -fsemantic-interposition
-
Some object formats, like ELF,allow interposing of symbols by the dynamic linker. This means that for symbols exported from theDSO,the compiler cannot perform interprocedural propagation, inlining and other optimizations in anticipation that the function or variable in question may change. While this feature is useful, for example, to rewrite memory allocation functions by a debugging implementation, it is expensive in the terms of code quality. With -fno-semantic-interposition the compiler assumes that if interposition happens for functions the overwriting function will have precisely the same semantics (and side effects). Similarly if interposition happens for variables, the constructor of the variable will be the same. The flag has no effect for functions explicitly declared inline (where it is never allowed for interposition to change semantics) and for symbols explicitly declared weak.
- -fshrink-wrap
- Emit function prologues only before parts of the function that need it, rather than at the top of the function. This flag is enabled by default at -O and higher.
- -fshrink-wrap-separate
- Shrink-wrap separate parts of the prologue and epilogue separately, so that those parts are only executed when needed. This option is on by default, but has no effect unless -fshrink-wrap is also turned on and the target supports this.
- -fcaller-saves
-
Enable allocation of values to registers that are clobbered by
function calls, by emitting extra instructions to save and restore the
registers around such calls. Such allocation is done only when it
seems to result in better code.
This option is always enabled by default on certain machines, usually those which have no call-preserved registers to use instead.
Enabled at levels -O2, -O3, -Os.
- -fcombine-stack-adjustments
-
Tracks stack adjustments (pushes and pops) and stack memory references
and then tries to find ways to combine them.
Enabled by default at -O1 and higher.
- -fipa-ra
-
Use caller save registers for allocation if those registers are not used by
any called function. In that case it is not necessary to save and restore
them around calls. This is only possible if called functions are part of
same compilation unit as current function and they are compiled before it.
Enabled at levels -O2, -O3, -Os, however the option is disabled if generated code will be instrumented for profiling (-p, or -pg) or if callee's register usage cannot be known exactly (this happens on targets that do not expose prologues and epilogues in
RTL). - -fconserve-stack
- Attempt to minimize stack usage. The compiler attempts to use less stack space, even if that makes the program slower. This option implies setting the large-stack-frame parameter to 100 and the large-stack-frame-growth parameter to 400.
- -ftree-reassoc
- Perform reassociation on trees. This flag is enabled by default at -O and higher.
- -fcode-hoisting
- Perform code hoisting. Code hoisting tries to move the evaluation of expressions executed on all paths to the function exit as early as possible. This is especially useful as a code size optimization, but it often helps for code speed as well. This flag is enabled by default at -O2 and higher.
- -ftree-pre
-
Perform partial redundancy elimination (PRE) on trees. This flag is enabled by default at -O2 and -O3.
- -ftree-partial-pre
-
Make partial redundancy elimination (PRE) more aggressive. This flag is enabled by default at -O3.
- -ftree-forwprop
- Perform forward propagation on trees. This flag is enabled by default at -O and higher.
- -ftree-fre
-
Perform full redundancy elimination (FRE) on trees. The difference betweenFREandPREis thatFREonly considers expressions that are computed on all paths leading to the redundant computation. This analysis is faster thanPRE,though it exposes fewer redundancies. This flag is enabled by default at -O and higher.
- -ftree-phiprop
- Perform hoisting of loads from conditional pointers on trees. This pass is enabled by default at -O and higher.
- -fhoist-adjacent-loads
- Speculatively hoist loads from both branches of an if-then-else if the loads are from adjacent locations in the same structure and the target architecture has a conditional move instruction. This flag is enabled by default at -O2 and higher.
- -ftree-copy-prop
- Perform copy propagation on trees. This pass eliminates unnecessary copy operations. This flag is enabled by default at -O and higher.
- -fipa-pure-const
- Discover which functions are pure or constant. Enabled by default at -O and higher.
- -fipa-reference
- Discover which static variables do not escape the compilation unit. Enabled by default at -O and higher.
- -fipa-pta
- Perform interprocedural pointer analysis and interprocedural modification and reference analysis. This option can cause excessive memory and compile-time usage on large compilation units. It is not enabled by default at any optimization level.
- -fipa-profile
- Perform interprocedural profile propagation. The functions called only from cold functions are marked as cold. Also functions executed once (such as "cold", "noreturn", static constructors or destructors) are identified. Cold functions and loop less parts of functions executed once are then optimized for size. Enabled by default at -O and higher.
- -fipa-cp
- Perform interprocedural constant propagation. This optimization analyzes the program to determine when values passed to functions are constants and then optimizes accordingly. This optimization can substantially increase performance if the application has constants passed to functions. This flag is enabled by default at -O2, -Os and -O3.
- -fipa-cp-clone
- Perform function cloning to make interprocedural constant propagation stronger. When enabled, interprocedural constant propagation performs function cloning when externally visible function can be called with constant arguments. Because this optimization can create multiple copies of functions, it may significantly increase code size (see --param ipcp-unit-growth=value). This flag is enabled by default at -O3.
- -fipa-bit-cp
- When enabled, perform interprocedural bitwise constant propagation. This flag is enabled by default at -O2. It requires that -fipa-cp is enabled.
- -fipa-vrp
- When enabled, perform interprocedural propagation of value ranges. This flag is enabled by default at -O2. It requires that -fipa-cp is enabled.
- -fipa-icf
-
Perform Identical Code Folding for functions and read-only variables.
The optimization reduces code size and may disturb unwind stacks by replacing
a function by equivalent one with a different name. The optimization works
more effectively with link-time optimization enabled.
Nevertheless the behavior is similar to Gold Linker
ICFoptimization,GCC ICFworks on different levels and thus the optimizations are not same - there are equivalences that are found only byGCCand equivalences found only by Gold.This flag is enabled by default at -O2 and -Os.
- -fisolate-erroneous-paths-dereference
- Detect paths that trigger erroneous or undefined behavior due to dereferencing a null pointer. Isolate those paths from the main control flow and turn the statement with erroneous or undefined behavior into a trap. This flag is enabled by default at -O2 and higher and depends on -fdelete-null-pointer-checks also being enabled.
- -fisolate-erroneous-paths-attribute
- Detect paths that trigger erroneous or undefined behavior due a null value being used in a way forbidden by a "returns_nonnull" or "nonnull" attribute. Isolate those paths from the main control flow and turn the statement with erroneous or undefined behavior into a trap. This is not currently enabled, but may be enabled by -O2 in the future.
- -ftree-sink
- Perform forward store motion on trees. This flag is enabled by default at -O and higher.
- -ftree-bit-ccp
- Perform sparse conditional bit constant propagation on trees and propagate pointer alignment information. This pass only operates on local scalar variables and is enabled by default at -O and higher. It requires that -ftree-ccp is enabled.
- -ftree-ccp
-
Perform sparse conditional constant propagation (CCP) on trees. This pass only operates on local scalar variables and is enabled by default at -O and higher.
- -fssa-backprop
- Propagate information about uses of a value up the definition chain in order to simplify the definitions. For example, this pass strips sign operations if the sign of a value never matters. The flag is enabled by default at -O and higher.
- -fssa-phiopt
-
Perform pattern matching on SSA PHInodes to optimize conditional code. This pass is enabled by default at -O and higher.
- -ftree-switch-conversion
- Perform conversion of simple initializations in a switch to initializations from a scalar array. This flag is enabled by default at -O2 and higher.
- -ftree-tail-merge
- Look for identical code sequences. When found, replace one with a jump to the other. This optimization is known as tail merging or cross jumping. This flag is enabled by default at -O2 and higher. The compilation time in this pass can be limited using max-tail-merge-comparisons parameter and max-tail-merge-iterations parameter.
- -ftree-dce
-
Perform dead code elimination (DCE) on trees. This flag is enabled by default at -O and higher.
- -ftree-builtin-call-dce
-
Perform conditional dead code elimination (DCE) for calls to built-in functions that may set "errno" but are otherwise side-effect free. This flag is enabled by default at -O2 and higher if -Os is not also specified.
- -ftree-dominator-opts
- Perform a variety of simple scalar cleanups (constant/copy propagation, redundancy elimination, range propagation and expression simplification) based on a dominator tree traversal. This also performs jump threading (to reduce jumps to jumps). This flag is enabled by default at -O and higher.
- -ftree-dse
-
Perform dead store elimination (DSE) on trees. A dead store is a store into a memory location that is later overwritten by another store without any intervening loads. In this case the earlier store can be deleted. This flag is enabled by default at -O and higher.
- -ftree-ch
- Perform loop header copying on trees. This is beneficial since it increases effectiveness of code motion optimizations. It also saves one jump. This flag is enabled by default at -O and higher. It is not enabled for -Os, since it usually increases code size.
- -ftree-loop-optimize
- Perform loop optimizations on trees. This flag is enabled by default at -O and higher.
- -ftree-loop-linear
- -floop-interchange
- -floop-strip-mine
- -floop-block
- -floop-unroll-and-jam
-
Perform loop nest optimizations. Same as
-floop-nest-optimize. To use this code transformation, GCChas to be configured with --with-isl to enable the Graphite loop transformation infrastructure.
- -fgraphite-identity
-
Enable the identity transformation for graphite. For every SCoP we generate
the polyhedral representation and transform it back to gimple. Using
-fgraphite-identity we can check the costs or benefits of the
GIMPLE->GRAPHITE->GIMPLEtransformation. Some minimal optimizations are also performed by the code generator isl, like index splitting and dead code elimination in loops.
- -floop-nest-optimize
- Enable the isl based loop nest optimizer. This is a generic loop nest optimizer based on the Pluto optimization algorithms. It calculates a loop structure optimized for data-locality and parallelism. This option is experimental.
- -floop-parallelize-all
- Use the Graphite data dependence analysis to identify loops that can be parallelized. Parallelize all the loops that can be analyzed to not contain loop carried dependences without checking that it is profitable to parallelize the loops.
- -ftree-coalesce-vars
-
While transforming the program out of the SSArepresentation, attempt to reduce copying by coalescing versions of different user-defined variables, instead of just compiler temporaries. This may severely limit the ability to debug an optimized program compiled with -fno-var-tracking-assignments. In the negated form, this flag preventsSSAcoalescing of user variables. This option is enabled by default if optimization is enabled, and it does very little otherwise.
- -ftree-loop-if-convert
- Attempt to transform conditional jumps in the innermost loops to branch-less equivalents. The intent is to remove control-flow from the innermost loops in order to improve the ability of the vectorization pass to handle these loops. This is enabled by default if vectorization is enabled.
- -ftree-loop-distribution
-
Perform loop distribution. This flag can improve cache performance on
big loop bodies and allow further loop optimizations, like
parallelization or vectorization, to take place. For example, the loop
DO I = 1, N A(I) = B(I) + C D(I) = E(I) * F ENDDO
is transformed to
DO I = 1, N A(I) = B(I) + C ENDDO DO I = 1, N D(I) = E(I) * F ENDDO
- -ftree-loop-distribute-patterns
-
Perform loop distribution of patterns that can be code generated with
calls to a library. This flag is enabled by default at -O3.
This pass distributes the initialization loops and generates a call to memset zero. For example, the loop
DO I = 1, N A(I) = 0 B(I) = A(I) + I ENDDO
is transformed to
DO I = 1, N A(I) = 0 ENDDO DO I = 1, N B(I) = A(I) + I ENDDO
and the initialization loop is transformed into a call to memset zero.
- -ftree-loop-im
-
Perform loop invariant motion on trees. This pass moves only invariants that
are hard to handle at RTLlevel (function calls, operations that expand to nontrivial sequences of insns). With -funswitch-loops it also moves operands of conditions that are invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store motion.
- -ftree-loop-ivcanon
- Create a canonical counter for number of iterations in loops for which determining number of iterations requires complicated analysis. Later optimizations then may determine the number easily. Useful especially in connection with unrolling.
- -fivopts
- Perform induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees.
- -ftree-parallelize-loops=n
- Parallelize loops, i.e., split their iteration space to run in n threads. This is only possible for loops whose iterations are independent and can be arbitrarily reordered. The optimization is only profitable on multiprocessor machines, for loops that are CPU-intensive, rather than constrained e.g. by memory bandwidth. This option implies -pthread, and thus is only supported on targets that have support for -pthread.
- -ftree-pta
- Perform function-local points-to analysis on trees. This flag is enabled by default at -O and higher.
- -ftree-sra
- Perform scalar replacement of aggregates. This pass replaces structure references with scalars to prevent committing structures to memory too early. This flag is enabled by default at -O and higher.
- -fstore-merging
- Perform merging of narrow stores to consecutive memory addresses. This pass merges contiguous stores of immediate values narrower than a word into fewer wider stores to reduce the number of instructions. This is enabled by default at -O2 and higher as well as -Os.
- -ftree-ter
-
Perform temporary expression replacement during the SSA->normal phase. Single use/single def temporaries are replaced at their use location with their defining expression. This results in non-GIMPLE code, but gives the expanders much more complex trees to work on resulting in betterRTLgeneration. This is enabled by default at -O and higher.
- -ftree-slsr
- Perform straight-line strength reduction on trees. This recognizes related expressions involving multiplications and replaces them by less expensive calculations when possible. This is enabled by default at -O and higher.
- -ftree-vectorize
- Perform vectorization on trees. This flag enables -ftree-loop-vectorize and -ftree-slp-vectorize if not explicitly specified.
- -ftree-loop-vectorize
- Perform loop vectorization on trees. This flag is enabled by default at -O3 and when -ftree-vectorize is enabled.
- -ftree-slp-vectorize
- Perform basic block vectorization on trees. This flag is enabled by default at -O3 and when -ftree-vectorize is enabled.
- -fvect-cost-model=model
- Alter the cost model used for vectorization. The model argument should be one of unlimited, dynamic or cheap. With the unlimited model the vectorized code-path is assumed to be profitable while with the dynamic model a runtime check guards the vectorized code-path to enable it only for iteration counts that will likely execute faster than when executing the original scalar loop. The cheap model disables vectorization of loops where doing so would be cost prohibitive for example due to required runtime checks for data dependence or alignment but otherwise is equal to the dynamic model. The default cost model depends on other optimization flags and is either dynamic or cheap.
- -fsimd-cost-model=model
- Alter the cost model used for vectorization of loops marked with the OpenMP or Cilk Plus simd directive. The model argument should be one of unlimited, dynamic, cheap. All values of model have the same meaning as described in -fvect-cost-model and by default a cost model defined with -fvect-cost-model is used.
- -ftree-vrp
- Perform Value Range Propagation on trees. This is similar to the constant propagation pass, but instead of values, ranges of values are propagated. This allows the optimizers to remove unnecessary range checks like array bound checks and null pointer checks. This is enabled by default at -O2 and higher. Null pointer check elimination is only done if -fdelete-null-pointer-checks is enabled.
- -fsplit-paths
- Split paths leading to loop backedges. This can improve dead code elimination and common subexpression elimination. This is enabled by default at -O2 and above.
- -fsplit-ivs-in-unroller
-
Enables expression of values of induction variables in later iterations
of the unrolled loop using the value in the first iteration. This breaks
long dependency chains, thus improving efficiency of the scheduling passes.
A combination of -fweb and
CSEis often sufficient to obtain the same effect. However, that is not reliable in cases where the loop body is more complicated than a single basic block. It also does not work at all on some architectures due to restrictions in theCSEpass.This optimization is enabled by default.
- -fvariable-expansion-in-unroller
- With this option, the compiler creates multiple copies of some local variables when unrolling a loop, which can result in superior code.
- -fpartial-inlining
-
Inline parts of functions. This option has any effect only
when inlining itself is turned on by the -finline-functions
or -finline-small-functions options.
Enabled at level -O2.
- -fpredictive-commoning
-
Perform predictive commoning optimization, i.e., reusing computations
(especially memory loads and stores) performed in previous
iterations of loops.
This option is enabled at level -O3.
- -fprefetch-loop-arrays
-
If supported by the target machine, generate instructions to prefetch
memory to improve the performance of loops that access large arrays.
This option may generate better or worse code; results are highly dependent on the structure of loops within the source code.
Disabled at level -Os.
- -fno-printf-return-value
-
Do not substitute constants for known return value of formatted output
functions such as "sprintf", "snprintf", "vsprintf", and
"vsnprintf" (but not "printf" of "fprintf"). This
transformation allows GCCto optimize or even eliminate branches based on the known return value of these functions called with arguments that are either constant, or whose values are known to be in a range that makes determining the exact return value possible. For example, when -fprintf-return-value is in effect, both the branch and the body of the "if" statement (but not the call to "snprint") can be optimized away when "i" is a 32-bit or smaller integer because the return value is guaranteed to be at most 8.
char buf[9]; if (snprintf (buf, "%08x", i) >= sizeof buf) ...
The -fprintf-return-value option relies on other optimizations and yields best results with -O2. It works in tandem with the -Wformat-overflow and -Wformat-truncation options. The -fprintf-return-value option is enabled by default.
- -fno-peephole
- -fno-peephole2
-
Disable any machine-specific peephole optimizations. The difference
between -fno-peephole and -fno-peephole2 is in how they
are implemented in the compiler; some targets use one, some use the
other, a few use both.
-fpeephole is enabled by default. -fpeephole2 enabled at levels -O2, -O3, -Os.
- -fno-guess-branch-probability
-
Do not guess branch probabilities using heuristics.
GCCuses heuristics to guess branch probabilities if they are not provided by profiling feedback (-fprofile-arcs). These heuristics are based on the control flow graph. If some branch probabilities are specified by "__builtin_expect", then the heuristics are used to guess branch probabilities for the rest of the control flow graph, taking the "__builtin_expect" info into account. The interactions between the heuristics and "__builtin_expect" can be complex, and in some cases, it may be useful to disable the heuristics so that the effects of "__builtin_expect" are easier to understand.
The default is -fguess-branch-probability at levels -O, -O2, -O3, -Os.
- -freorder-blocks
-
Reorder basic blocks in the compiled function in order to reduce number of
taken branches and improve code locality.
Enabled at levels -O, -O2, -O3, -Os.
- -freorder-blocks-algorithm=algorithm
-
Use the specified algorithm for basic block reordering. The
algorithm argument can be simple, which does not increase
code size (except sometimes due to secondary effects like alignment),
or stc, the ``software trace cache'' algorithm, which tries to
put all often executed code together, minimizing the number of branches
executed by making extra copies of code.
The default is simple at levels -O, -Os, and stc at levels -O2, -O3.
- -freorder-blocks-and-partition
-
In addition to reordering basic blocks in the compiled function, in order
to reduce number of taken branches, partitions hot and cold basic blocks
into separate sections of the assembly and .o files, to improve
paging and cache locality performance.
This optimization is automatically turned off in the presence of exception handling, for linkonce sections, for functions with a user-defined section attribute and on any architecture that does not support named sections.
Enabled for x86 at levels -O2, -O3.
- -freorder-functions
-
Reorder functions in the object file in order to
improve code locality. This is implemented by using special
subsections ".text.hot" for most frequently executed functions and
".text.unlikely" for unlikely executed functions. Reordering is done by
the linker so object file format must support named sections and linker must
place them in a reasonable way.
Also profile feedback must be available to make this option effective. See -fprofile-arcs for details.
Enabled at levels -O2, -O3, -Os.
- -fstrict-aliasing
-
Allow the compiler to assume the strictest aliasing rules applicable to
the language being compiled. For C (and C++), this activates optimizations based on the type of expressions. In particular, an object of one type is assumed never to reside at the same address as an object of a different type, unless the types are almost the same. For example, an "unsigned int" can alias an "int", but not a "void*" or a "double". A character type may alias any other type.
Pay special attention to code like this:
union a_union { int i; double d; }; int f() { union a_union t; t.d = 3.0; return t.i; }
The practice of reading from a different union member than the one most recently written to (called ``type-punning'') is common. Even with -fstrict-aliasing, type-punning is allowed, provided the memory is accessed through the union type. So, the code above works as expected. However, this code might not:
int f() { union a_union t; int* ip; t.d = 3.0; ip = &t.i; return *ip; }
Similarly, access by taking the address, casting the resulting pointer and dereferencing the result has undefined behavior, even if the cast uses a union type, e.g.:
int f() { double d = 3.0; return ((union a_union *) &d)->i; }
The -fstrict-aliasing option is enabled at levels -O2, -O3, -Os.
- -fstrict-overflow
-
Allow the compiler to assume strict signed overflow rules, depending
on the language being compiled. For C (and C++) this means that overflow when doing arithmetic with signed numbers is undefined, which means that the compiler may assume that it does not happen. This permits various optimizations. For example, the compiler assumes that an expression like "i + 10 > i" is always true for signed "i". This assumption is only valid if signed overflow is undefined, as the expression is false if "i + 10" overflows when using twos complement arithmetic. When this option is in effect any attempt to determine whether an operation on signed numbers overflows must be written carefully to not actually involve overflow.
This option also allows the compiler to assume strict pointer semantics: given a pointer to an object, if adding an offset to that pointer does not produce a pointer to the same object, the addition is undefined. This permits the compiler to conclude that "p + u > p" is always true for a pointer "p" and unsigned integer "u". This assumption is only valid because pointer wraparound is undefined, as the expression is false if "p + u" overflows using twos complement arithmetic.
See also the -fwrapv option. Using -fwrapv means that integer signed overflow is fully defined: it wraps. When -fwrapv is used, there is no difference between -fstrict-overflow and -fno-strict-overflow for integers. With -fwrapv certain types of overflow are permitted. For example, if the compiler gets an overflow when doing arithmetic on constants, the overflowed value can still be used with -fwrapv, but not otherwise.
The -fstrict-overflow option is enabled at levels -O2, -O3, -Os.
- -falign-functions
- -falign-functions=n
-
Align the start of functions to the next power-of-two greater than
n, skipping up to n bytes. For instance,
-falign-functions=32 aligns functions to the next 32-byte
boundary, but -falign-functions=24 aligns to the next
32-byte boundary only if this can be done by skipping 23 bytes or less.
-fno-align-functions and -falign-functions=1 are equivalent and mean that functions are not aligned.
Some assemblers only support this flag when n is a power of two; in that case, it is rounded up.
If n is not specified or is zero, use a machine-dependent default.
Enabled at levels -O2, -O3.
- -flimit-function-alignment
- If this option is enabled, the compiler tries to avoid unnecessarily overaligning functions. It attempts to instruct the assembler to align by the amount specified by -falign-functions, but not to skip more bytes than the size of the function.
- -falign-labels
- -falign-labels=n
-
Align all branch targets to a power-of-two boundary, skipping up to
n bytes like -falign-functions. This option can easily
make code slower, because it must insert dummy operations for when the
branch target is reached in the usual flow of the code.
-fno-align-labels and -falign-labels=1 are equivalent and mean that labels are not aligned.
If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead.
If n is not specified or is zero, use a machine-dependent default which is very likely to be 1, meaning no alignment.
Enabled at levels -O2, -O3.
- -falign-loops
- -falign-loops=n
-
Align loops to a power-of-two boundary, skipping up to n bytes
like -falign-functions. If the loops are
executed many times, this makes up for any execution of the dummy
operations.
-fno-align-loops and -falign-loops=1 are equivalent and mean that loops are not aligned.
If n is not specified or is zero, use a machine-dependent default.
Enabled at levels -O2, -O3.
- -falign-jumps
- -falign-jumps=n
-
Align branch targets to a power-of-two boundary, for branch targets
where the targets can only be reached by jumping, skipping up to n
bytes like -falign-functions. In this case, no dummy operations
need be executed.
-fno-align-jumps and -falign-jumps=1 are equivalent and mean that loops are not aligned.
If n is not specified or is zero, use a machine-dependent default.
Enabled at levels -O2, -O3.
- -funit-at-a-time
-
This option is left for compatibility reasons. -funit-at-a-time
has no effect, while -fno-unit-at-a-time implies
-fno-toplevel-reorder and -fno-section-anchors.
Enabled by default.
- -fno-toplevel-reorder
-
Do not reorder top-level functions, variables, and "asm"
statements. Output them in the same order that they appear in the
input file. When this option is used, unreferenced static variables
are not removed. This option is intended to support existing code
that relies on a particular ordering. For new code, it is better to
use attributes when possible.
Enabled at level -O0. When disabled explicitly, it also implies -fno-section-anchors, which is otherwise enabled at -O0 on some targets.
- -fweb
-
Constructs webs as commonly used for register allocation purposes and assign
each web individual pseudo register. This allows the register allocation pass
to operate on pseudos directly, but also strengthens several other optimization
passes, such as CSE,loop optimizer and trivial dead code remover. It can, however, make debugging impossible, since variables no longer stay in a ``home register''.
Enabled by default with -funroll-loops.
- -fwhole-program
-
Assume that the current compilation unit represents the whole program being
compiled. All public functions and variables with the exception of "main"
and those merged by attribute "externally_visible" become static functions
and in effect are optimized more aggressively by interprocedural optimizers.
This option should not be used in combination with -flto. Instead relying on a linker plugin should provide safer and more precise information.
- -flto[=n]
-
This option runs the standard link-time optimizer. When invoked
with source code, it generates GIMPLE(one ofGCC's internal representations) and writes it to specialELFsections in the object file. When the object files are linked together, all the function bodies are read from theseELFsections and instantiated as if they had been part of the same translation unit.
To use the link-time optimizer, -flto and optimization options should be specified at compile time and during the final link. It is recommended that you compile all the files participating in the same link with the same options and also specify those options at link time. For example:
gcc -c -O2 -flto foo.c gcc -c -O2 -flto bar.c gcc -o myprog -flto -O2 foo.o bar.o
The first two invocations to
GCCsave a bytecode representation ofGIMPLEinto specialELFsections inside foo.o and bar.o. The final invocation reads theGIMPLEbytecode from foo.o and bar.o, merges the two files into a single internal image, and compiles the result as usual. Since both foo.o and bar.o are merged into a single image, this causes all the interprocedural analyses and optimizations inGCCto work across the two files as if they were a single one. This means, for example, that the inliner is able to inline functions in bar.o into functions in foo.o and vice-versa.Another (simpler) way to enable link-time optimization is:
gcc -o myprog -flto -O2 foo.c bar.c
The above generates bytecode for foo.c and bar.c, merges them together into a single
GIMPLErepresentation and optimizes them as usual to produce myprog.The only important thing to keep in mind is that to enable link-time optimizations you need to use the
GCCdriver to perform the link step.GCCthen automatically performs link-time optimization if any of the objects involved were compiled with the -flto command-line option. You generally should specify the optimization options to be used for link-time optimization thoughGCCtries to be clever at guessing an optimization level to use from the options used at compile time if you fail to specify one at link time. You can always override the automatic decision to do link-time optimization by passing -fno-lto to the link command.To make whole program optimization effective, it is necessary to make certain whole program assumptions. The compiler needs to know what functions and variables can be accessed by libraries and runtime outside of the link-time optimized unit. When supported by the linker, the linker plugin (see -fuse-linker-plugin) passes information to the compiler about used and externally visible symbols. When the linker plugin is not available, -fwhole-program should be used to allow the compiler to make these assumptions, which leads to more aggressive optimization decisions.
When -fuse-linker-plugin is not enabled, when a file is compiled with -flto, the generated object file is larger than a regular object file because it contains
GIMPLEbytecodes and the usual final code (see -ffat-lto-objects. This means that object files withLTOinformation can be linked as normal object files; if -fno-lto is passed to the linker, no interprocedural optimizations are applied. Note that when -fno-fat-lto-objects is enabled the compile stage is faster but you cannot perform a regular, non-LTO link on them.Additionally, the optimization flags used to compile individual files are not necessarily related to those used at link time. For instance,
gcc -c -O0 -ffat-lto-objects -flto foo.c gcc -c -O0 -ffat-lto-objects -flto bar.c gcc -o myprog -O3 foo.o bar.o
This produces individual object files with unoptimized assembler code, but the resulting binary myprog is optimized at -O3. If, instead, the final binary is generated with -fno-lto, then myprog is not optimized.
When producing the final binary,
GCConly applies link-time optimizations to those files that contain bytecode. Therefore, you can mix and match object files and libraries withGIMPLEbytecodes and final object code.GCCautomatically selects which files to optimize inLTOmode and which files to link without further processing.There are some code generation flags preserved by
GCCwhen generating bytecodes, as they need to be used during the final link stage. Generally options specified at link time override those specified at compile time.If you do not specify an optimization level option -O at link time, then
GCCuses the highest optimization level used when compiling the object files.Currently, the following options and their settings are taken from the first object file that explicitly specifies them: -fPIC, -fpic, -fpie, -fcommon, -fexceptions, -fnon-call-exceptions, -fgnu-tm and all the -m target flags.
Certain ABI-changing flags are required to match in all compilation units, and trying to override this at link time with a conflicting value is ignored. This includes options such as -freg-struct-return and -fpcc-struct-return.
Other options such as -ffp-contract, -fno-strict-overflow, -fwrapv, -fno-trapv or -fno-strict-aliasing are passed through to the link stage and merged conservatively for conflicting translation units. Specifically -fno-strict-overflow, -fwrapv and -fno-trapv take precedence; and for example -ffp-contract=off takes precedence over -ffp-contract=fast. You can override them at link time.
If
LTOencounters objects with C linkage declared with incompatible types in separate translation units to be linked together (undefined behavior according toISO C99 6.2.7), a non-fatal diagnostic may be issued. The behavior is still undefined at run time. Similar diagnostics may be raised for other languages.Another feature of
LTOis that it is possible to apply interprocedural optimizations on files written in different languages:gcc -c -flto foo.c g++ -c -flto bar.cc gfortran -c -flto baz.f90 g++ -o myprog -flto -O3 foo.o bar.o baz.o -lgfortran
Notice that the final link is done with g++ to get the C
++runtime libraries and -lgfortran is added to get the Fortran runtime libraries. In general, when mixing languages inLTOmode, you should use the same link command options as when mixing languages in a regular (non-LTO) compilation.If object files containing
GIMPLEbytecode are stored in a library archive, say libfoo.a, it is possible to extract and use them in anLTOlink if you are using a linker with plugin support. To create static libraries suitable forLTO,use gcc-ar and gcc-ranlib instead of ar and ranlib; to show the symbols of object files withGIMPLEbytecode, use gcc-nm. Those commands require that ar, ranlib and nm have been compiled with plugin support. At link time, use the the flag -fuse-linker-plugin to ensure that the library participates in theLTOoptimization process:gcc -o myprog -O2 -flto -fuse-linker-plugin a.o b.o -lfoo
With the linker plugin enabled, the linker extracts the needed
GIMPLEfiles from libfoo.a and passes them on to the runningGCCto make them part of the aggregatedGIMPLEimage to be optimized.If you are not using a linker with plugin support and/or do not enable the linker plugin, then the objects inside libfoo.a are extracted and linked as usual, but they do not participate in the
LTOoptimization process. In order to make a static library suitable for bothLTOoptimization and usual linkage, compile its object files with -flto -ffat-lto-objects.Link-time optimizations do not require the presence of the whole program to operate. If the program does not require any symbols to be exported, it is possible to combine -flto and -fwhole-program to allow the interprocedural optimizers to use more aggressive assumptions which may lead to improved optimization opportunities. Use of -fwhole-program is not needed when linker plugin is active (see -fuse-linker-plugin).
The current implementation of
LTOmakes no attempt to generate bytecode that is portable between different types of hosts. The bytecode files are versioned and there is a strict version check, so bytecode files generated in one version ofGCCdo not work with an older or newer version ofGCC.Link-time optimization does not work well with generation of debugging information. Combining -flto with -g is currently experimental and expected to produce unexpected results.
If you specify the optional n, the optimization and code generation done at link time is executed in parallel using n parallel jobs by utilizing an installed make program. The environment variable
MAKEmay be used to override the program used. The default value for n is 1.You can also specify -flto=jobserver to use
GNUmake's job server mode to determine the number of parallel jobs. This is useful when the Makefile callingGCCis already executing in parallel. You must prepend a + to the command recipe in the parent Makefile for this to work. This option likely only works ifMAKEisGNUmake. - -flto-partition=alg
-
Specify the partitioning algorithm used by the link-time optimizer.
The value is either 1to1 to specify a partitioning mirroring
the original source files or balanced to specify partitioning
into equally sized chunks (whenever possible) or max to create
new partition for every symbol where possible. Specifying none
as an algorithm disables partitioning and streaming completely.
The default value is balanced. While 1to1 can be used
as an workaround for various code ordering issues, the max
partitioning is intended for internal testing only.
The value one specifies that exactly one partition should be
used while the value none bypasses partitioning and executes
the link-time optimization step directly from the WPAphase.
- -flto-odr-type-merging
-
Enable streaming of mangled types names of C++types and their unification at link time. This increases size ofLTOobject files, but enables diagnostics about One Definition Rule violations.
- -flto-compression-level=n
-
This option specifies the level of compression used for intermediate
language written to LTOobject files, and is only meaningful in conjunction withLTOmode (-flto). Valid values are 0 (no compression) to 9 (maximum compression). Values outside this range are clamped to either 0 or 9. If the option is not given, a default balanced compression setting is used.
- -fuse-linker-plugin
-
Enables the use of a linker plugin during link-time optimization. This
option relies on plugin support in the linker, which is available in gold
or in GNUld 2.21 or newer.
This option enables the extraction of object files with
GIMPLEbytecode out of library archives. This improves the quality of optimization by exposing more code to the link-time optimizer. This information specifies what symbols can be accessed externally (by non-LTO object or during dynamic linking). Resulting code quality improvements on binaries (and shared libraries that use hidden visibility) are similar to -fwhole-program. See -flto for a description of the effect of this flag and how to use it.This option is enabled by default when
LTOsupport inGCCis enabled andGCCwas configured for use with a linker supporting plugins (GNUld 2.21 or newer or gold). - -ffat-lto-objects
-
Fat LTOobjects are object files that contain both the intermediate language and the object code. This makes them usable for bothLTOlinking and normal linking. This option is effective only when compiling with -flto and is ignored at link time.
-fno-fat-lto-objects improves compilation time over plain
LTO,but requires the complete toolchain to be aware ofLTO.It requires a linker with linker plugin support for basic functionality. Additionally, nm, ar and ranlib need to support linker plugins to allow a full-featured build environment (capable of building static libraries etc).GCCprovides the gcc-ar, gcc-nm, gcc-ranlib wrappers to pass the right options to these tools. With non fatLTOmakefiles need to be modified to use them.The default is -fno-fat-lto-objects on targets with linker plugin support.
- -fcompare-elim
-
After register allocation and post-register allocation instruction splitting,
identify arithmetic instructions that compute processor flags similar to a
comparison operation based on that arithmetic. If possible, eliminate the
explicit comparison operation.
This pass only applies to certain targets that cannot explicitly represent the comparison operation before register allocation is complete.
Enabled at levels -O, -O2, -O3, -Os.
- -fcprop-registers
-
After register allocation and post-register allocation instruction splitting,
perform a copy-propagation pass to try to reduce scheduling dependencies
and occasionally eliminate the copy.
Enabled at levels -O, -O2, -O3, -Os.
- -fprofile-correction
-
Profiles collected using an instrumented binary for multi-threaded programs may
be inconsistent due to missed counter updates. When this option is specified,
GCCuses heuristics to correct or smooth out such inconsistencies. By default,GCCemits an error message when an inconsistent profile is detected.
- -fprofile-use
- -fprofile-use=path
-
Enable profile feedback-directed optimizations,
and the following optimizations
which are generally profitable only with profile feedback available:
-fbranch-probabilities, -fvpt,
-funroll-loops, -fpeel-loops, -ftracer,
-ftree-vectorize, and ftree-loop-distribute-patterns.
Before you can use this option, you must first generate profiling information.
By default,
GCCemits an error message if the feedback profiles do not match the source code. This error can be turned into a warning by using -Wcoverage-mismatch. Note this may result in poorly optimized code.If path is specified,
GCClooks at the path to find the profile feedback data files. See -fprofile-dir. - -fauto-profile
- -fauto-profile=path
-
Enable sampling-based feedback-directed optimizations,
and the following optimizations
which are generally profitable only with profile feedback available:
-fbranch-probabilities, -fvpt,
-funroll-loops, -fpeel-loops, -ftracer,
-ftree-vectorize,
-finline-functions, -fipa-cp, -fipa-cp-clone,
-fpredictive-commoning, -funswitch-loops,
-fgcse-after-reload, and -ftree-loop-distribute-patterns.
path is the name of a file containing AutoFDO profile information. If omitted, it defaults to fbdata.afdo in the current directory.
Producing an AutoFDO profile data file requires running your program with the perf utility on a supported GNU/Linux target system. For more information, see <perf.wiki.kernel.org>.
E.g.
perf record -e br_inst_retired:near_taken -b -o perf.data \ -- your_program
Then use the create_gcov tool to convert the raw profile data to a format that can be used by
GCC.You must also supply the unstripped binary for your program to this tool. See <github.com/google/autofdo>.E.g.
create_gcov --binary=your_program.unstripped --profile=perf.data \ --gcov=profile.afdo
The following options control compiler behavior regarding floating-point arithmetic. These options trade off between speed and correctness. All must be specifically enabled.
- -ffloat-store
-
Do not store floating-point variables in registers, and inhibit other
options that might change whether a floating-point value is taken from a
register or memory.
This option prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more precision than a "double" is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only good, but a few programs rely on the precise definition of
IEEEfloating point. Use -ffloat-store for such programs, after modifying them to store all pertinent intermediate computations into variables. - -fexcess-precision=style
-
This option allows further control over excess precision on machines
where floating-point operations occur in a format with more precision or
range than the IEEEstandard and interchange floating-point types. By default, -fexcess-precision=fast is in effect; this means that operations may be carried out in a wider precision than the types specified in the source if that would result in faster code, and it is unpredictable when rounding to the types specified in the source code takes place. When compiling C, if -fexcess-precision=standard is specified then excess precision follows the rules specified inISO C99; in particular, both casts and assignments cause values to be rounded to their semantic types (whereas -ffloat-store only affects assignments). This option is enabled by default for C if a strict conformance option such as -std=c99 is used. -ffast-math enables -fexcess-precision=fast by default regardless of whether a strict conformance option is used.
-fexcess-precision=standard is not implemented for languages other than C. On the x86, it has no effect if -mfpmath=sse or -mfpmath=sse+387 is specified; in the former case,
IEEEsemantics apply without excess precision, and in the latter, rounding is unpredictable. - -ffast-math
-
Sets the options -fno-math-errno, -funsafe-math-optimizations,
-ffinite-math-only, -fno-rounding-math,
-fno-signaling-nans, -fcx-limited-range and
-fexcess-precision=fast.
This option causes the preprocessor macro "__FAST_MATH__" to be defined.
This option is not turned on by any -O option besides -Ofast since it can result in incorrect output for programs that depend on an exact implementation of
IEEEorISOrules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications. - -fno-math-errno
-
Do not set "errno" after calling math functions that are executed
with a single instruction, e.g., "sqrt". A program that relies on
IEEEexceptions for math error handling may want to use this flag for speed while maintainingIEEEarithmetic compatibility.
This option is not turned on by any -O option since it can result in incorrect output for programs that depend on an exact implementation of
IEEEorISOrules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications.The default is -fmath-errno.
On Darwin systems, the math library never sets "errno". There is therefore no reason for the compiler to consider the possibility that it might, and -fno-math-errno is the default.
- -funsafe-math-optimizations
-
Allow optimizations for floating-point arithmetic that (a) assume
that arguments and results are valid and (b) may violate IEEEorANSIstandards. When used at link time, it may include libraries or startup files that change the defaultFPUcontrol word or other similar optimizations.
This option is not turned on by any -O option since it can result in incorrect output for programs that depend on an exact implementation of
IEEEorISOrules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications. Enables -fno-signed-zeros, -fno-trapping-math, -fassociative-math and -freciprocal-math.The default is -fno-unsafe-math-optimizations.
- -fassociative-math
-
Allow re-association of operands in series of floating-point operations.
This violates the ISO Cand C++language standard by possibly changing computation result.NOTE:re-ordering may change the sign of zero as well as ignore NaNs and inhibit or create underflow or overflow (and thus cannot be used on code that relies on rounding behavior like "(x + 2**52) - 2**52". May also reorder floating-point comparisons and thus may not be used when ordered comparisons are required. This option requires that both -fno-signed-zeros and -fno-trapping-math be in effect. Moreover, it doesn't make much sense with -frounding-math. For Fortran the option is automatically enabled when both -fno-signed-zeros and -fno-trapping-math are in effect.
The default is -fno-associative-math.
- -freciprocal-math
-
Allow the reciprocal of a value to be used instead of dividing by
the value if this enables optimizations. For example "x / y"
can be replaced with "x * (1/y)", which is useful if "(1/y)"
is subject to common subexpression elimination. Note that this loses
precision and increases the number of flops operating on the value.
The default is -fno-reciprocal-math.
- -ffinite-math-only
-
Allow optimizations for floating-point arithmetic that assume
that arguments and results are not NaNs or +-Infs.
This option is not turned on by any -O option since it can result in incorrect output for programs that depend on an exact implementation of
IEEEorISOrules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications.The default is -fno-finite-math-only.
- -fno-signed-zeros
-
Allow optimizations for floating-point arithmetic that ignore the
signedness of zero. IEEEarithmetic specifies the behavior of distinct +0.0 and -0.0 values, which then prohibits simplification of expressions such as x+0.0 or 0.0*x (even with -ffinite-math-only). This option implies that the sign of a zero result isn't significant.
The default is -fsigned-zeros.
- -fno-trapping-math
-
Compile code assuming that floating-point operations cannot generate
user-visible traps. These traps include division by zero, overflow,
underflow, inexact result and invalid operation. This option requires
that -fno-signaling-nans be in effect. Setting this option may
allow faster code if one relies on ``non-stop'' IEEEarithmetic, for example.
This option should never be turned on by any -O option since it can result in incorrect output for programs that depend on an exact implementation of
IEEEorISOrules/specifications for math functions.The default is -ftrapping-math.
- -frounding-math
-
Disable transformations and optimizations that assume default floating-point
rounding behavior. This is round-to-zero for all floating point
to integer conversions, and round-to-nearest for all other arithmetic
truncations. This option should be specified for programs that change
the FProunding mode dynamically, or that may be executed with a non-default rounding mode. This option disables constant folding of floating-point expressions at compile time (which may be affected by rounding mode) and arithmetic transformations that are unsafe in the presence of sign-dependent rounding modes.
The default is -fno-rounding-math.
This option is experimental and does not currently guarantee to disable all
GCCoptimizations that are affected by rounding mode. Future versions ofGCCmay provide finer control of this setting using C99's "FENV_ACCESS" pragma. This command-line option will be used to specify the default state for "FENV_ACCESS". - -fsignaling-nans
-
Compile code assuming that IEEEsignaling NaNs may generate user-visible traps during floating-point operations. Setting this option disables optimizations that may change the number of exceptions visible with signaling NaNs. This option implies -ftrapping-math.
This option causes the preprocessor macro "__SUPPORT_SNAN__" to be defined.
The default is -fno-signaling-nans.
This option is experimental and does not currently guarantee to disable all
GCCoptimizations that affect signaling NaN behavior. - -fno-fp-int-builtin-inexact
-
Do not allow the built-in functions "ceil", "floor",
"round" and "trunc", and their "float" and "long
double" variants, to generate code that raises the ``inexact''
floating-point exception for noninteger arguments. ISO C99and C11 allow these functions to raise the ``inexact'' exception, butISO/IEC TS 18661-1:2014,the C bindings toIEEE 754-2008,does not allow these functions to do so.
The default is -ffp-int-builtin-inexact, allowing the exception to be raised. This option does nothing unless -ftrapping-math is in effect.
Even if -fno-fp-int-builtin-inexact is used, if the functions generate a call to a library function then the ``inexact'' exception may be raised if the library implementation does not follow
TS 18661. - -fsingle-precision-constant
- Treat floating-point constants as single precision instead of implicitly converting them to double-precision constants.
- -fcx-limited-range
-
When enabled, this option states that a range reduction step is not
needed when performing complex division. Also, there is no checking
whether the result of a complex multiplication or division is "NaN
+ I*NaN", with an attempt to rescue the situation in that case. The
default is -fno-cx-limited-range, but is enabled by
-ffast-math.
This option controls the default setting of the
ISO C99"CX_LIMITED_RANGE" pragma. Nevertheless, the option applies to all languages. - -fcx-fortran-rules
-
Complex multiplication and division follow Fortran rules. Range
reduction is done as part of complex division, but there is no checking
whether the result of a complex multiplication or division is "NaN
+ I*NaN", with an attempt to rescue the situation in that case.
The default is -fno-cx-fortran-rules.
The following options control optimizations that may improve performance, but are not enabled by any -O options. This section includes experimental options that may produce broken code.
- -fbranch-probabilities
-
After running a program compiled with -fprofile-arcs,
you can compile it a second time using
-fbranch-probabilities, to improve optimizations based on
the number of times each branch was taken. When a program
compiled with -fprofile-arcs exits, it saves arc execution
counts to a file called sourcename.gcda for each source
file. The information in this data file is very dependent on the
structure of the generated code, so you must use the same source code
and the same optimization options for both compilations.
With -fbranch-probabilities,
GCCputs aREG_BR_PROBnote on eachJUMP_INSNandCALL_INSN. These can be used to improve optimization. Currently, they are only used in one place: in reorg.c, instead of guessing which path a branch is most likely to take, theREG_BR_PROBvalues are used to exactly determine which path is taken more often. - -fprofile-values
-
If combined with -fprofile-arcs, it adds code so that some
data about values of expressions in the program is gathered.
With -fbranch-probabilities, it reads back the data gathered from profiling values of expressions for usage in optimizations.
Enabled with -fprofile-generate and -fprofile-use.
- -fprofile-reorder-functions
-
Function reordering based on profile instrumentation collects
first time of execution of a function and orders these functions
in ascending order.
Enabled with -fprofile-use.
- -fvpt
-
If combined with -fprofile-arcs, this option instructs the compiler
to add code to gather information about values of expressions.
With -fbranch-probabilities, it reads back the data gathered and actually performs the optimizations based on them. Currently the optimizations include specialization of division operations using the knowledge about the value of the denominator.
- -frename-registers
-
Attempt to avoid false dependencies in scheduled code by making use
of registers left over after register allocation. This optimization
most benefits processors with lots of registers. Depending on the
debug information format adopted by the target, however, it can
make debugging impossible, since variables no longer stay in
a ``home register''.
Enabled by default with -funroll-loops.
- -fschedule-fusion
-
Performs a target dependent pass over the instruction stream to schedule
instructions of same type together because target machine can execute them
more efficiently if they are adjacent to each other in the instruction flow.
Enabled at levels -O2, -O3, -Os.
- -ftracer
-
Perform tail duplication to enlarge superblock size. This transformation
simplifies the control flow of the function allowing other optimizations to do
a better job.
Enabled with -fprofile-use.
- -funroll-loops
-
Unroll loops whose number of iterations can be determined at compile time or
upon entry to the loop. -funroll-loops implies
-frerun-cse-after-loop, -fweb and -frename-registers.
It also turns on complete loop peeling (i.e. complete removal of loops with
a small constant number of iterations). This option makes code larger, and may
or may not make it run faster.
Enabled with -fprofile-use.
- -funroll-all-loops
- Unroll all loops, even if their number of iterations is uncertain when the loop is entered. This usually makes programs run more slowly. -funroll-all-loops implies the same options as -funroll-loops.
- -fpeel-loops
-
Peels loops for which there is enough information that they do not
roll much (from profile feedback or static analysis). It also turns on
complete loop peeling (i.e. complete removal of loops with small constant
number of iterations).
Enabled with -O3 and/or -fprofile-use.
- -fmove-loop-invariants
-
Enables the loop invariant motion pass in the RTLloop optimizer. Enabled at level -O1
- -fsplit-loops
- Split a loop into two if it contains a condition that's always true for one side of the iteration space and false for the other.
- -funswitch-loops
- Move branches with loop invariant conditions out of the loop, with duplicates of the loop on both branches (modified according to result of the condition).
- -ffunction-sections
- -fdata-sections
-
Place each function or data item into its own section in the output
file if the target supports arbitrary sections. The name of the
function or the name of the data item determines the section's name
in the output file.
Use these options on systems where the linker can perform optimizations to improve locality of reference in the instruction space. Most systems using the
ELFobject format andSPARCprocessors running Solaris 2 have linkers with such optimizations.AIXmay have these optimizations in the future.Only use these options when there are significant benefits from doing so. When you specify these options, the assembler and linker create larger object and executable files and are also slower. You cannot use gprof on all systems if you specify this option, and you may have problems with debugging if you specify both this option and -g.
- -fbranch-target-load-optimize
- Perform branch target register load optimization before prologue / epilogue threading. The use of target registers can typically be exposed only during reload, thus hoisting loads out of loops and doing inter-block scheduling needs a separate optimization pass.
- -fbranch-target-load-optimize2
- Perform branch target register load optimization after prologue / epilogue threading.
- -fbtr-bb-exclusive
- When performing branch target register load optimization, don't reuse branch target registers within any basic block.
- -fstdarg-opt
-
Optimize the prologue of variadic argument functions with respect to usage of
those arguments.
NOTE:In Ubuntu 14.10 and later versions, -fstack-protector-strong is enabled by default for C, C++, ObjC, ObjC++, if none of -fno-stack-protector, -nostdlib, nor -ffreestanding are found.
- -fsection-anchors
-
Try to reduce the number of symbolic address calculations by using
shared ``anchor'' symbols to address nearby objects. This transformation
can help to reduce the number of GOTentries andGOTaccesses on some targets.
For example, the implementation of the following function "foo":
static int a, b, c; int foo (void) { return a + b + c; }
usually calculates the addresses of all three variables, but if you compile it with -fsection-anchors, it accesses the variables from a common anchor point instead. The effect is similar to the following pseudocode (which isn't valid C):
int foo (void) { register int *xr = &x; return xr[&a - &x] + xr[&b - &x] + xr[&c - &x]; }
Not all targets support this option.
- --param name=value
-
In some places, GCCuses various constants to control the amount of optimization that is done. For example,GCCdoes not inline functions that contain more than a certain number of instructions. You can control some of these constants on the command line using the --param option.
The names of specific parameters, and the meaning of the values, are tied to the internals of the compiler, and are subject to change without notice in future releases.
In each case, the value is an integer. The allowable choices for name are:
-
- predictable-branch-outcome
- When branch is predicted to be taken with probability lower than this threshold (in percent), then it is considered well predictable. The default is 10.
- max-rtl-if-conversion-insns
-
RTLif-conversion tries to remove conditional branches around a block and replace them with conditionally executed instructions. This parameter gives the maximum number of instructions in a block which should be considered for if-conversion. The default is 10, though the compiler will also use other heuristics to decide whether if-conversion is likely to be profitable.
- max-rtl-if-conversion-predictable-cost
- max-rtl-if-conversion-unpredictable-cost
-
RTLif-conversion will try to remove conditional branches around a block and replace them with conditionally executed instructions. These parameters give the maximum permissible cost for the sequence that would be generated by if-conversion depending on whether the branch is statically determined to be predictable or not. The units for this parameter are the same as those for theGCCinternal seq_cost metric. The compiler will try to provide a reasonable default for this parameter using theBRANCH_COSTtarget macro.
- max-crossjump-edges
- The maximum number of incoming edges to consider for cross-jumping. The algorithm used by -fcrossjumping is O(N^2) in the number of edges incoming to each block. Increasing values mean more aggressive optimization, making the compilation time increase with probably small improvement in executable size.
- min-crossjump-insns
- The minimum number of instructions that must be matched at the end of two blocks before cross-jumping is performed on them. This value is ignored in the case where all instructions in the block being cross-jumped from are matched. The default value is 5.
- max-grow-copy-bb-insns
- The maximum code size expansion factor when copying basic blocks instead of jumping. The expansion is relative to a jump instruction. The default value is 8.
- max-goto-duplication-insns
-
The maximum number of instructions to duplicate to a block that jumps
to a computed goto. To avoid O(N^2) behavior in a number of
passes, GCCfactors computed gotos early in the compilation process, and unfactors them as late as possible. Only computed jumps at the end of a basic blocks with no more than max-goto-duplication-insns are unfactored. The default value is 8.
- max-delay-slot-insn-search
- The maximum number of instructions to consider when looking for an instruction to fill a delay slot. If more than this arbitrary number of instructions are searched, the time savings from filling the delay slot are minimal, so stop searching. Increasing values mean more aggressive optimization, making the compilation time increase with probably small improvement in execution time.
- max-delay-slot-live-search
- When trying to fill delay slots, the maximum number of instructions to consider when searching for a block with valid live register information. Increasing this arbitrarily chosen value means more aggressive optimization, increasing the compilation time. This parameter should be removed when the delay slot code is rewritten to maintain the control-flow graph.
- max-gcse-memory
- The approximate maximum amount of memory that can be allocated in order to perform the global common subexpression elimination optimization. If more memory than specified is required, the optimization is not done.
- max-gcse-insertion-ratio
-
If the ratio of expression insertions to deletions is larger than this value
for any expression, then RTL PREinserts or removes the expression and thus leaves partially redundant computations in the instruction stream. The default value is 20.
- max-pending-list-length
- The maximum number of pending dependencies scheduling allows before flushing the current state and starting over. Large functions with few branches or calls can create excessively large lists which needlessly consume memory and resources.
- max-modulo-backtrack-attempts
- The maximum number of backtrack attempts the scheduler should make when modulo scheduling a loop. Larger values can exponentially increase compilation time.
- max-inline-insns-single
-
Several parameters control the tree inliner used in GCC.This number sets the maximum number of instructions (counted inGCC's internal representation) in a single function that the tree inliner considers for inlining. This only affects functions declared inline and methods implemented in a class declaration (C++). The default value is 400.
- max-inline-insns-auto
- When you use -finline-functions (included in -O3), a lot of functions that would otherwise not be considered for inlining by the compiler are investigated. To those functions, a different (more restrictive) limit compared to functions declared inline can be applied. The default value is 40.
- inline-min-speedup
- When estimated performance improvement of caller + callee runtime exceeds this threshold (in percent), the function can be inlined regardless of the limit on --param max-inline-insns-single and --param max-inline-insns-auto.
- large-function-insns
- The limit specifying really large functions. For functions larger than this limit after inlining, inlining is constrained by --param large-function-growth. This parameter is useful primarily to avoid extreme compilation time caused by non-linear algorithms used by the back end. The default value is 2700.
- large-function-growth
- Specifies maximal growth of large function caused by inlining in percents. The default value is 100 which limits large function growth to 2.0 times the original size.
- large-unit-insns
- The limit specifying large translation unit. Growth caused by inlining of units larger than this limit is limited by --param inline-unit-growth. For small units this might be too tight. For example, consider a unit consisting of function A that is inline and B that just calls A three times. If B is small relative to A, the growth of unit is 300\% and yet such inlining is very sane. For very large units consisting of small inlineable functions, however, the overall unit growth limit is needed to avoid exponential explosion of code size. Thus for smaller units, the size is increased to --param large-unit-insns before applying --param inline-unit-growth. The default is 10000.
- inline-unit-growth
- Specifies maximal overall growth of the compilation unit caused by inlining. The default value is 20 which limits unit growth to 1.2 times the original size. Cold functions (either marked cold via an attribute or by profile feedback) are not accounted into the unit size.
- ipcp-unit-growth
- Specifies maximal overall growth of the compilation unit caused by interprocedural constant propagation. The default value is 10 which limits unit growth to 1.1 times the original size.
- large-stack-frame
- The limit specifying large stack frames. While inlining the algorithm is trying to not grow past this limit too much. The default value is 256 bytes.
- large-stack-frame-growth
- Specifies maximal growth of large stack frames caused by inlining in percents. The default value is 1000 which limits large stack frame growth to 11 times the original size.
- max-inline-insns-recursive
- max-inline-insns-recursive-auto
-
Specifies the maximum number of instructions an out-of-line copy of a
self-recursive inline
function can grow into by performing recursive inlining.
--param max-inline-insns-recursive applies to functions declared inline. For functions not declared inline, recursive inlining happens only when -finline-functions (included in -O3) is enabled; --param max-inline-insns-recursive-auto applies instead. The default value is 450.
- max-inline-recursive-depth
- max-inline-recursive-depth-auto
-
Specifies the maximum recursion depth used for recursive inlining.
--param max-inline-recursive-depth applies to functions declared inline. For functions not declared inline, recursive inlining happens only when -finline-functions (included in -O3) is enabled; --param max-inline-recursive-depth-auto applies instead. The default value is 8.
- min-inline-recursive-probability
-
Recursive inlining is profitable only for function having deep recursion
in average and can hurt for function having little recursion depth by
increasing the prologue size or complexity of function body to other
optimizers.
When profile feedback is available (see -fprofile-generate) the actual recursion depth can be guessed from the probability that function recurses via a given call expression. This parameter limits inlining only to call expressions whose probability exceeds the given threshold (in percents). The default value is 10.
- early-inlining-insns
- Specify growth that the early inliner can make. In effect it increases the amount of inlining for code having a large abstraction penalty. The default value is 14.
- max-early-inliner-iterations
- Limit of iterations of the early inliner. This basically bounds the number of nested indirect calls the early inliner can resolve. Deeper chains are still handled by late inlining.
- comdat-sharing-probability
-
Probability (in percent) that C++inline function with comdat visibility are shared across multiple compilation units. The default value is 20.
- profile-func-internal-id
- A parameter to control whether to use function internal id in profile database lookup. If the value is 0, the compiler uses an id that is based on function assembler name and filename, which makes old profile data more tolerant to source changes such as function reordering etc. The default value is 0.
- min-vect-loop-bound
- The minimum number of iterations under which loops are not vectorized when -ftree-vectorize is used. The number of iterations after vectorization needs to be greater than the value specified by this option to allow vectorization. The default value is 0.
- gcse-cost-distance-ratio
-
Scaling factor in calculation of maximum distance an expression
can be moved by GCSEoptimizations. This is currently supported only in the code hoisting pass. The bigger the ratio, the more aggressive code hoisting is with simple expressions, i.e., the expressions that have cost less than gcse-unrestricted-cost. Specifying 0 disables hoisting of simple expressions. The default value is 10.
- gcse-unrestricted-cost
-
Cost, roughly measured as the cost of a single typical machine
instruction, at which GCSEoptimizations do not constrain the distance an expression can travel. This is currently supported only in the code hoisting pass. The lesser the cost, the more aggressive code hoisting is. Specifying 0 allows all expressions to travel unrestricted distances. The default value is 3.
- max-hoist-depth
- The depth of search in the dominator tree for expressions to hoist. This is used to avoid quadratic behavior in hoisting algorithm. The value of 0 does not limit on the search, but may slow down compilation of huge functions. The default value is 30.
- max-tail-merge-comparisons
- The maximum amount of similar bbs to compare a bb with. This is used to avoid quadratic behavior in tree tail merging. The default value is 10.
- max-tail-merge-iterations
- The maximum amount of iterations of the pass over the function. This is used to limit compilation time in tree tail merging. The default value is 2.
- store-merging-allow-unaligned
- Allow the store merging pass to introduce unaligned stores if it is legal to do so. The default value is 1.
- max-stores-to-merge
- The maximum number of stores to attempt to merge into wider stores in the store merging pass. The minimum value is 2 and the default is 64.
- max-unrolled-insns
- The maximum number of instructions that a loop may have to be unrolled. If a loop is unrolled, this parameter also determines how many times the loop code is unrolled.
- max-average-unrolled-insns
- The maximum number of instructions biased by probabilities of their execution that a loop may have to be unrolled. If a loop is unrolled, this parameter also determines how many times the loop code is unrolled.
- max-unroll-times
- The maximum number of unrollings of a single loop.
- max-peeled-insns
- The maximum number of instructions that a loop may have to be peeled. If a loop is peeled, this parameter also determines how many times the loop code is peeled.
- max-peel-times
- The maximum number of peelings of a single loop.
- max-peel-branches
- The maximum number of branches on the hot path through the peeled sequence.
- max-completely-peeled-insns
- The maximum number of insns of a completely peeled loop.
- max-completely-peel-times
- The maximum number of iterations of a loop to be suitable for complete peeling.
- max-completely-peel-loop-nest-depth
- The maximum depth of a loop nest suitable for complete peeling.
- max-unswitch-insns
- The maximum number of insns of an unswitched loop.
- max-unswitch-level
- The maximum number of branches unswitched in a single loop.
- max-loop-headers-insns
- The maximum number of insns in loop header duplicated by the copy loop headers pass.
- lim-expensive
- The minimum cost of an expensive expression in the loop invariant motion.
- iv-consider-all-candidates-bound
- Bound on number of candidates for induction variables, below which all candidates are considered for each use in induction variable optimizations. If there are more candidates than this, only the most relevant ones are considered to avoid quadratic time complexity.
- iv-max-considered-uses
- The induction variable optimizations give up on loops that contain more induction variable uses.
- iv-always-prune-cand-set-bound
- If the number of candidates in the set is smaller than this value, always try to remove unnecessary ivs from the set when adding a new one.
- avg-loop-niter
- Average number of iterations of a loop.
- dse-max-object-size
- Maximum size (in bytes) of objects tracked bytewise by dead store elimination. Larger values may result in larger compilation times.
- scev-max-expr-size
- Bound on size of expressions used in the scalar evolutions analyzer. Large expressions slow the analyzer.
- scev-max-expr-complexity
- Bound on the complexity of the expressions in the scalar evolutions analyzer. Complex expressions slow the analyzer.
- max-tree-if-conversion-phi-args
-
Maximum number of arguments in a PHIsupported byTREEif conversion unless the loop is marked with simd pragma.
- vect-max-version-for-alignment-checks
- The maximum number of run-time checks that can be performed when doing loop versioning for alignment in the vectorizer.
- vect-max-version-for-alias-checks
- The maximum number of run-time checks that can be performed when doing loop versioning for alias in the vectorizer.
- vect-max-peeling-for-alignment
- The maximum number of loop peels to enhance access alignment for vectorizer. Value -1 means no limit.
- max-iterations-to-track
- The maximum number of iterations of a loop the brute-force algorithm for analysis of the number of iterations of the loop tries to evaluate.
- hot-bb-count-ws-permille
- A basic block profile count is considered hot if it contributes to the given permillage (i.e. 0...1000) of the entire profiled execution.
- hot-bb-frequency-fraction
- Select fraction of the entry block frequency of executions of basic block in function given basic block needs to have to be considered hot.
- max-predicted-iterations
- The maximum number of loop iterations we predict statically. This is useful in cases where a function contains a single loop with known bound and another loop with unknown bound. The known number of iterations is predicted correctly, while the unknown number of iterations average to roughly 10. This means that the loop without bounds appears artificially cold relative to the other one.
- builtin-expect-probability
- Control the probability of the expression having the specified value. This parameter takes a percentage (i.e. 0 ... 100) as input. The default probability of 90 is obtained empirically.
- align-threshold
- Select fraction of the maximal frequency of executions of a basic block in a function to align the basic block.
- align-loop-iterations
- A loop expected to iterate at least the selected number of iterations is aligned.
- tracer-dynamic-coverage
- tracer-dynamic-coverage-feedback
-
This value is used to limit superblock formation once the given percentage of
executed instructions is covered. This limits unnecessary code size
expansion.
The tracer-dynamic-coverage-feedback parameter is used only when profile feedback is available. The real profiles (as opposed to statically estimated ones) are much less balanced allowing the threshold to be larger value.
- tracer-max-code-growth
- Stop tail duplication once code growth has reached given percentage. This is a rather artificial limit, as most of the duplicates are eliminated later in cross jumping, so it may be set to much higher values than is the desired code growth.
- tracer-min-branch-ratio
- Stop reverse growth when the reverse probability of best edge is less than this threshold (in percent).
- tracer-min-branch-probability
- tracer-min-branch-probability-feedback
-
Stop forward growth if the best edge has probability lower than this
threshold.
Similarly to tracer-dynamic-coverage two parameters are provided. tracer-min-branch-probability-feedback is used for compilation with profile feedback and tracer-min-branch-probability compilation without. The value for compilation with profile feedback needs to be more conservative (higher) in order to make tracer effective.
- max-cse-path-length
-
The maximum number of basic blocks on path that CSEconsiders. The default is 10.
- max-cse-insns
-
The maximum number of instructions CSEprocesses before flushing. The default is 1000.
- ggc-min-expand
-
GCCuses a garbage collector to manage its own memory allocation. This parameter specifies the minimum percentage by which the garbage collector's heap should be allowed to expand between collections. Tuning this may improve compilation speed; it has no effect on code generation.
The default is 30% + 70% * (
RAM/1GB) with an upper bound of 100% whenRAM>= 1GB. If "getrlimit" is available, the notion of ``RAM''is the smallest of actualRAMand "RLIMIT_DATA" or "RLIMIT_AS". IfGCCis not able to calculateRAMon a particular platform, the lower bound of 30% is used. Setting this parameter and ggc-min-heapsize to zero causes a full collection to occur at every opportunity. This is extremely slow, but can be useful for debugging. - ggc-min-heapsize
-
Minimum size of the garbage collector's heap before it begins bothering
to collect garbage. The first collection occurs after the heap expands
by ggc-min-expand% beyond ggc-min-heapsize. Again,
tuning this may improve compilation speed, and has no effect on code
generation.
The default is the smaller of
RAM/8, RLIMIT_RSS,or a limit that tries to ensure thatRLIMIT_DATAorRLIMIT_ASare not exceeded, but with a lower bound of 4096 (four megabytes) and an upper bound of 131072 (128 megabytes). IfGCCis not able to calculateRAMon a particular platform, the lower bound is used. Setting this parameter very large effectively disables garbage collection. Setting this parameter and ggc-min-expand to zero causes a full collection to occur at every opportunity. - max-reload-search-insns
- The maximum number of instruction reload should look backward for equivalent register. Increasing values mean more aggressive optimization, making the compilation time increase with probably slightly better performance. The default value is 100.
- max-cselib-memory-locations
- The maximum number of memory locations cselib should take into account. Increasing values mean more aggressive optimization, making the compilation time increase with probably slightly better performance. The default value is 500.
- max-sched-ready-insns
- The maximum number of instructions ready to be issued the scheduler should consider at any given time during the first scheduling pass. Increasing values mean more thorough searches, making the compilation time increase with probably little benefit. The default value is 100.
- max-sched-region-blocks
- The maximum number of blocks in a region to be considered for interblock scheduling. The default value is 10.
- max-pipeline-region-blocks
- The maximum number of blocks in a region to be considered for pipelining in the selective scheduler. The default value is 15.
- max-sched-region-insns
- The maximum number of insns in a region to be considered for interblock scheduling. The default value is 100.
- max-pipeline-region-insns
- The maximum number of insns in a region to be considered for pipelining in the selective scheduler. The default value is 200.
- min-spec-prob
- The minimum probability (in percents) of reaching a source block for interblock speculative scheduling. The default value is 40.
- max-sched-extend-regions-iters
-
The maximum number of iterations through CFGto extend regions. A value of 0 (the default) disables region extensions.
- max-sched-insn-conflict-delay
- The maximum conflict delay for an insn to be considered for speculative motion. The default value is 3.
- sched-spec-prob-cutoff
- The minimal probability of speculation success (in percents), so that speculative insns are scheduled. The default value is 40.
- sched-state-edge-prob-cutoff
- The minimum probability an edge must have for the scheduler to save its state across it. The default value is 10.
- sched-mem-true-dep-cost
-
Minimal distance (in CPUcycles) between store and load targeting same memory locations. The default value is 1.
- selsched-max-lookahead
- The maximum size of the lookahead window of selective scheduling. It is a depth of search for available instructions. The default value is 50.
- selsched-max-sched-times
- The maximum number of times that an instruction is scheduled during selective scheduling. This is the limit on the number of iterations through which the instruction may be pipelined. The default value is 2.
- selsched-insns-to-rename
- The maximum number of best instructions in the ready list that are considered for renaming in the selective scheduler. The default value is 2.
- sms-min-sc
- The minimum value of stage count that swing modulo scheduler generates. The default value is 2.
- max-last-value-rtl
- The maximum size measured as number of RTLs that can be recorded in an expression in combiner for a pseudo register as last known value of that register. The default is 10000.
- max-combine-insns
-
The maximum number of instructions the RTLcombiner tries to combine. The default value is 2 at -Og and 4 otherwise.
- integer-share-limit
- Small integer constants can use a shared data structure, reducing the compiler's memory usage and increasing its speed. This sets the maximum value of a shared integer constant. The default value is 256.
- ssp-buffer-size
-
The minimum size of buffers (i.e. arrays) that receive stack smashing
protection when -fstack-protection is used.
This default before Ubuntu 10.10 was ``8''. Currently it is ``4'', to increase the number of functions protected by the stack protector.
- min-size-for-stack-sharing
- The minimum size of variables taking part in stack slot sharing when not optimizing. The default value is 32.
- max-jump-thread-duplication-stmts
- Maximum number of statements allowed in a block that needs to be duplicated when threading jumps.
- max-fields-for-field-sensitive
- Maximum number of fields in a structure treated in a field sensitive manner during pointer analysis. The default is zero for -O0 and -O1, and 100 for -Os, -O2, and -O3.
- prefetch-latency
- Estimate on average number of instructions that are executed before prefetch finishes. The distance prefetched ahead is proportional to this constant. Increasing this number may also lead to less streams being prefetched (see simultaneous-prefetches).
- simultaneous-prefetches
- Maximum number of prefetches that can run at the same time.
- l1-cache-line-size
- The size of cache line in L1 cache, in bytes.
- l1-cache-size
- The size of L1 cache, in kilobytes.
- l2-cache-size
- The size of L2 cache, in kilobytes.
- min-insn-to-prefetch-ratio
- The minimum ratio between the number of instructions and the number of prefetches to enable prefetching in a loop.
- prefetch-min-insn-to-mem-ratio
- The minimum ratio between the number of instructions and the number of memory references to enable prefetching in a loop.
- use-canonical-types
-
Whether the compiler should use the ``canonical'' type system. By
default, this should always be 1, which uses a more efficient internal
mechanism for comparing types in C++and Objective-C++. However, if bugs in the canonical type system are causing compilation failures, set this value to 0 to disable canonical types.
- switch-conversion-max-branch-ratio
- Switch initialization conversion refuses to create arrays that are bigger than switch-conversion-max-branch-ratio times the number of branches in the switch.
- max-partial-antic-length
- Maximum length of the partial antic set computed during the tree partial redundancy elimination optimization (-ftree-pre) when optimizing at -O3 and above. For some sorts of source code the enhanced partial redundancy elimination optimization can run away, consuming all of the memory available on the host machine. This parameter sets a limit on the length of the sets that are computed, which prevents the runaway behavior. Setting a value of 0 for this parameter allows an unlimited set length.
- sccvn-max-scc-size
-
Maximum size of a strongly connected component (SCC) duringSCCVNprocessing. If this limit is hit,SCCVNprocessing for the whole function is not done and optimizations depending on it are disabled. The default maximumSCCsize is 10000.
- sccvn-max-alias-queries-per-access
- Maximum number of alias-oracle queries we perform when looking for redundancies for loads and stores. If this limit is hit the search is aborted and the load or store is not considered redundant. The number of queries is algorithmically limited to the number of stores on all paths from the load to the function entry. The default maximum number of queries is 1000.
- ira-max-loops-num
-
IRAuses regional register allocation by default. If a function contains more loops than the number given by this parameter, only at most the given number of the most frequently-executed loops form regions for regional register allocation. The default value of the parameter is 100.
- ira-max-conflict-table-size
-
Although IRAuses a sophisticated algorithm to compress the conflict table, the table can still require excessive amounts of memory for huge functions. If the conflict table for a function could be more than the size inMBgiven by this parameter, the register allocator instead uses a faster, simpler, and lower-quality algorithm that does not require building a pseudo-register conflict table. The default value of the parameter is 2000.
- ira-loop-reserved-regs
-
IRAcan be used to evaluate more accurate register pressure in loops for decisions to move loop invariants (see -O3). The number of available registers reserved for some other purposes is given by this parameter. The default value of the parameter is 2, which is the minimal number of registers needed by typical instructions. This value is the best found from numerous experiments.
- lra-inheritance-ebb-probability-cutoff
-
LRAtries to reuse values reloaded in registers in subsequent insns. This optimization is called inheritance.EBBis used as a region to do this optimization. The parameter defines a minimal fall-through edge probability in percentage used to addBBto inheritanceEBBinLRA.The default value of the parameter is 40. The value was chosen from numerous runs ofSPEC2000on x86-64.
- loop-invariant-max-bbs-in-loop
- Loop invariant motion can be very expensive, both in compilation time and in amount of needed compile-time memory, with very large loops. Loops with more basic blocks than this parameter won't have loop invariant motion optimization performed on them. The default value of the parameter is 1000 for -O1 and 10000 for -O2 and above.
- loop-max-datarefs-for-datadeps
- Building data dependencies is expensive for very large loops. This parameter limits the number of data references in loops that are considered for data dependence analysis. These large loops are no handled by the optimizations using loop data dependencies. The default value is 1000.
- max-vartrack-size
- Sets a maximum number of hash table slots to use during variable tracking dataflow analysis of any function. If this limit is exceeded with variable tracking at assignments enabled, analysis for that function is retried without it, after removing all debug insns from the function. If the limit is exceeded even without debug insns, var tracking analysis is completely disabled for the function. Setting the parameter to zero makes it unlimited.
- max-vartrack-expr-depth
- Sets a maximum number of recursion levels when attempting to map variable names or debug temporaries to value expressions. This trades compilation time for more complete debug information. If this is set too low, value expressions that are available and could be represented in debug information may end up not being used; setting this higher may enable the compiler to find more complex debug expressions, but compile time and memory use may grow. The default is 12.
- min-nondebug-insn-uid
- Use uids starting at this parameter for nondebug insns. The range below the parameter is reserved exclusively for debug insns created by -fvar-tracking-assignments, but debug insns may get (non-overlapping) uids above it if the reserved range is exhausted.
- ipa-sra-ptr-growth-factor
- IPA-SRA replaces a pointer to an aggregate with one or more new parameters only when their cumulative size is less or equal to ipa-sra-ptr-growth-factor times the size of the original pointer parameter.
- sra-max-scalarization-size-Ospeed
- sra-max-scalarization-size-Osize
-
The two Scalar Reduction of Aggregates passes (SRAand IPA-SRA) aim to replace scalar parts of aggregates with uses of independent scalar variables. These parameters control the maximum size, in storage units, of aggregate which is considered for replacement when compiling for speed (sra-max-scalarization-size-Ospeed) or size (sra-max-scalarization-size-Osize) respectively.
- tm-max-aggregate-size
- When making copies of thread-local variables in a transaction, this parameter specifies the size in bytes after which variables are saved with the logging functions as opposed to save/restore code sequence pairs. This option only applies when using -fgnu-tm.
- graphite-max-nb-scop-params
- To avoid exponential effects in the Graphite loop transforms, the number of parameters in a Static Control Part (SCoP) is bounded. The default value is 10 parameters. A variable whose value is unknown at compilation time and defined outside a SCoP is a parameter of the SCoP.
- graphite-max-bbs-per-function
- To avoid exponential effects in the detection of SCoPs, the size of the functions analyzed by Graphite is bounded. The default value is 100 basic blocks.
- loop-block-tile-size
- Loop blocking or strip mining transforms, enabled with -floop-block or -floop-strip-mine, strip mine each loop in the loop nest by a given number of iterations. The strip length can be changed using the loop-block-tile-size parameter. The default value is 51 iterations.
- loop-unroll-jam-size
- Specify the unroll factor for the -floop-unroll-and-jam option. The default value is 4.
- loop-unroll-jam-depth
- Specify the dimension to be unrolled (counting from the most inner loop) for the -floop-unroll-and-jam. The default value is 2.
- ipa-cp-value-list-size
- IPA-CP attempts to track all possible values and types passed to a function's parameter in order to propagate them and perform devirtualization. ipa-cp-value-list-size is the maximum number of values and types it stores per one formal parameter of a function.
- ipa-cp-eval-threshold
- IPA-CP calculates its own score of cloning profitability heuristics and performs those cloning opportunities with scores that exceed ipa-cp-eval-threshold.
- ipa-cp-recursion-penalty
- Percentage penalty the recursive functions will receive when they are evaluated for cloning.
- ipa-cp-single-call-penalty
- Percentage penalty functions containing a single call to another function will receive when they are evaluated for cloning.
- ipa-max-agg-items
- IPA-CP is also capable to propagate a number of scalar values passed in an aggregate. ipa-max-agg-items controls the maximum number of such values per one parameter.
- ipa-cp-loop-hint-bonus
- When IPA-CP determines that a cloning candidate would make the number of iterations of a loop known, it adds a bonus of ipa-cp-loop-hint-bonus to the profitability score of the candidate.
- ipa-cp-array-index-hint-bonus
- When IPA-CP determines that a cloning candidate would make the index of an array access known, it adds a bonus of ipa-cp-array-index-hint-bonus to the profitability score of the candidate.
- ipa-max-aa-steps
- During its analysis of function bodies, IPA-CP employs alias analysis in order to track values pointed to by function parameters. In order not spend too much time analyzing huge functions, it gives up and consider all memory clobbered after examining ipa-max-aa-steps statements modifying memory.
- lto-partitions
-
Specify desired number of partitions produced during WHOPRcompilation. The number of partitions should exceed the number of CPUs used for compilation. The default value is 32.
- lto-min-partition
-
Size of minimal partition for WHOPR(in estimated instructions). This prevents expenses of splitting very small programs into too many partitions.
- lto-max-partition
-
Size of max partition for WHOPR(in estimated instructions). to provide an upper bound for individual size of partition. Meant to be used only with balanced partitioning.
- cxx-max-namespaces-for-diagnostic-help
-
The maximum number of namespaces to consult for suggestions when C++name lookup fails for an identifier. The default is 1000.
- sink-frequency-threshold
- The maximum relative execution frequency (in percents) of the target block relative to a statement's original block to allow statement sinking of a statement. Larger numbers result in more aggressive statement sinking. The default value is 75. A small positive adjustment is applied for statements with memory operands as those are even more profitable so sink.
- max-stores-to-sink
- The maximum number of conditional store pairs that can be sunk. Set to 0 if either vectorization (-ftree-vectorize) or if-conversion (-ftree-loop-if-convert) is disabled. The default is 2.
- allow-store-data-races
- Allow optimizers to introduce new data races on stores. Set to 1 to allow, otherwise to 0. This option is enabled by default at optimization level -Ofast.
- case-values-threshold
- The smallest number of different values for which it is best to use a jump-table instead of a tree of conditional branches. If the value is 0, use the default for the machine. The default is 0.
- tree-reassoc-width
- Set the maximum number of instructions executed in parallel in reassociated tree. This parameter overrides target dependent heuristics used by default if has non zero value.
- sched-pressure-algorithm
-
Choose between the two available implementations of
-fsched-pressure. Algorithm 1 is the original implementation
and is the more likely to prevent instructions from being reordered.
Algorithm 2 was designed to be a compromise between the relatively
conservative approach taken by algorithm 1 and the rather aggressive
approach taken by the default scheduler. It relies more heavily on
having a regular register file and accurate register pressure classes.
See haifa-sched.c in the GCCsources for more details.
The default choice depends on the target.
- max-slsr-cand-scan
- Set the maximum number of existing candidates that are considered when seeking a basis for a new straight-line strength reduction candidate.
- asan-globals
- Enable buffer overflow detection for global objects. This kind of protection is enabled by default if you are using -fsanitize=address option. To disable global objects protection use --param asan-globals=0.
- asan-stack
- Enable buffer overflow detection for stack objects. This kind of protection is enabled by default when using -fsanitize=address. To disable stack protection use --param asan-stack=0 option.
- asan-instrument-reads
- Enable buffer overflow detection for memory reads. This kind of protection is enabled by default when using -fsanitize=address. To disable memory reads protection use --param asan-instrument-reads=0.
- asan-instrument-writes
- Enable buffer overflow detection for memory writes. This kind of protection is enabled by default when using -fsanitize=address. To disable memory writes protection use --param asan-instrument-writes=0 option.
- asan-memintrin
- Enable detection for built-in functions. This kind of protection is enabled by default when using -fsanitize=address. To disable built-in functions protection use --param asan-memintrin=0.
- asan-use-after-return
-
Enable detection of use-after-return. This kind of protection
is enabled by default when using the -fsanitize=address option.
To disable it use --param asan-use-after-return=0.
Note: By default the check is disabled at run time. To enable it, add "detect_stack_use_after_return=1" to the environment variable
ASAN_OPTIONS. - asan-instrumentation-with-call-threshold
- If number of memory accesses in function being instrumented is greater or equal to this number, use callbacks instead of inline checks. E.g. to disable inline code use --param asan-instrumentation-with-call-threshold=0.
- use-after-scope-direct-emission-threshold
- If the size of a local variable in bytes is smaller or equal to this number, directly poison (or unpoison) shadow memory instead of using run-time callbacks. The default value is 256.
- chkp-max-ctor-size
- Static constructors generated by Pointer Bounds Checker may become very large and significantly increase compile time at optimization level -O1 and higher. This parameter is a maximum number of statements in a single generated constructor. Default value is 5000.
- max-fsm-thread-path-insns
- Maximum number of instructions to copy when duplicating blocks on a finite state automaton jump thread path. The default is 100.
- max-fsm-thread-length
- Maximum number of basic blocks on a finite state automaton jump thread path. The default is 10.
- max-fsm-thread-paths
- Maximum number of new jump thread paths to create for a finite state automaton. The default is 50.
- parloops-chunk-size
- Chunk size of omp schedule for loops parallelized by parloops. The default is 0.
- parloops-schedule
- Schedule type of omp schedule for loops parallelized by parloops (static, dynamic, guided, auto, runtime). The default is static.
- max-ssa-name-query-depth
-
Maximum depth of recursion when querying properties of SSAnames in things like fold routines. One level of recursion corresponds to following a use-def chain.
- hsa-gen-debug-stores
-
Enable emission of special debug stores within HSAkernels which are then read and reported by libgomp plugin. Generation of these stores is disabled by default, use --param hsa-gen-debug-stores=1 to enable it.
- max-speculative-devirt-maydefs
- The maximum number of may-defs we analyze when looking for a must-def specifying the dynamic type of an object that invokes a virtual call we may be able to devirtualize speculatively.
- max-vrp-switch-assertions
-
The maximum number of assertions to add along the default edge of a switch
statement during VRP.The default is 10.
-
Program Instrumentation Options
- -p
- Generate extra code to write profile information suitable for the analysis program prof. You must use this option when compiling the source files you want data about, and you must also use it when linking.
- -pg
- Generate extra code to write profile information suitable for the analysis program gprof. You must use this option when compiling the source files you want data about, and you must also use it when linking.
- -fprofile-arcs
-
Add code so that program flow arcs are instrumented. During
execution the program records how many times each branch and call is
executed and how many times it is taken or returns. On targets that support
constructors with priority support, profiling properly handles constructors,
destructors and C++constructors (and destructors) of classes which are used as a type of a global variable.
When the compiled program exits it saves this data to a file called auxname.gcda for each source file. The data may be used for profile-directed optimizations (-fbranch-probabilities), or for test coverage analysis (-ftest-coverage). Each object file's auxname is generated from the name of the output file, if explicitly specified and it is not the final executable, otherwise it is the basename of the source file. In both cases any suffix is removed (e.g. foo.gcda for input file dir/foo.c, or dir/foo.gcda for output file specified as -o dir/foo.o).
- --coverage
-
This option is used to compile and link code instrumented for coverage
analysis. The option is a synonym for -fprofile-arcs
-ftest-coverage (when compiling) and -lgcov (when
linking). See the documentation for those options for more details.
-
- *
- Compile the source files with -fprofile-arcs plus optimization and code generation options. For test coverage analysis, use the additional -ftest-coverage option. You do not need to profile every source file in a program.
- *
- Link your object files with -lgcov or -fprofile-arcs (the latter implies the former).
- *
- Run the program on a representative workload to generate the arc profile information. This may be repeated any number of times. You can run concurrent instances of your program, and provided that the file system supports locking, the data files will be correctly updated. Also "fork" calls are detected and correctly handled (double counting will not happen).
- *
- For profile-directed optimizations, compile the source files again with the same optimization and code generation options plus -fbranch-probabilities.
- *
- For test coverage analysis, use gcov to produce human readable information from the .gcno and .gcda files. Refer to the gcov documentation for further information.
-
With -fprofile-arcs, for each function of your program
GCCcreates a program flow graph, then finds a spanning tree for the graph. Only arcs that are not on the spanning tree have to be instrumented: the compiler adds code to count the number of times that these arcs are executed. When an arc is the only exit or only entrance to a block, the instrumentation code can be added to the block; otherwise, a new basic block must be created to hold the instrumentation code.
-
- -ftest-coverage
- Produce a notes file that the gcov code-coverage utility can use to show program coverage. Each source file's note file is called auxname.gcno. Refer to the -fprofile-arcs option above for a description of auxname and instructions on how to generate test coverage data. Coverage data matches the source files more closely if you do not optimize.
- -fprofile-dir=path
-
Set the directory to search for the profile data files in to path.
This option affects only the profile data generated by
-fprofile-generate, -ftest-coverage, -fprofile-arcs
and used by -fprofile-use and -fbranch-probabilities
and its related options. Both absolute and relative paths can be used.
By default, GCCuses the current directory as path, thus the profile data file appears in the same directory as the object file.
- -fprofile-generate
- -fprofile-generate=path
-
Enable options usually used for instrumenting application to produce
profile useful for later recompilation with profile feedback based
optimization. You must use -fprofile-generate both when
compiling and when linking your program.
The following options are enabled: -fprofile-arcs, -fprofile-values, -fvpt.
If path is specified,
GCClooks at the path to find the profile feedback data files. See -fprofile-dir.To optimize the program based on the collected profile information, use -fprofile-use.
- -fprofile-update=method
-
Alter the update method for an application instrumented for profile
feedback based optimization. The method argument should be one of
single, atomic or prefer-atomic.
The first one is useful for single-threaded applications,
while the second one prevents profile corruption by emitting thread-safe code.
Warning: When an application does not properly join all threads (or creates an detached thread), a profile file can be still corrupted.
Using prefer-atomic would be transformed either to atomic, when supported by a target, or to single otherwise. The
GCCdriver automatically selects prefer-atomic when -pthread is present in the command line. - -fsanitize=address
-
Enable AddressSanitizer, a fast memory error detector.
Memory access instructions are instrumented to detect
out-of-bounds and use-after-free bugs.
The option enables -fsanitize-address-use-after-scope.
See <github.com/google/sanitizers/wiki/AddressSanitizer> for
more details. The run-time behavior can be influenced using the
ASAN_OPTIONSenvironment variable. When set to "help=1", the available options are shown at startup of the instrumented program. See <github.com/google/sanitizers/wiki/AddressSanitizerFlags#run-time-flags> for a list of supported options. The option cannot be combined with -fsanitize=thread and/or -fcheck-pointer-bounds.
- -fsanitize=kernel-address
- Enable AddressSanitizer for Linux kernel. See <github.com/google/kasan/wiki> for more details. The option cannot be combined with -fcheck-pointer-bounds.
- -fsanitize=thread
-
Enable ThreadSanitizer, a fast data race detector.
Memory access instructions are instrumented to detect
data race bugs. See <github.com/google/sanitizers/wiki#threadsanitizer> for more
details. The run-time behavior can be influenced using the TSAN_OPTIONSenvironment variable; see <github.com/google/sanitizers/wiki/ThreadSanitizerFlags> for a list of supported options. The option cannot be combined with -fsanitize=address, -fsanitize=leak and/or -fcheck-pointer-bounds.
Note that sanitized atomic builtins cannot throw exceptions when operating on invalid memory addresses with non-call exceptions (-fnon-call-exceptions).
- -fsanitize=leak
-
Enable LeakSanitizer, a memory leak detector.
This option only matters for linking of executables and
the executable is linked against a library that overrides "malloc"
and other allocator functions. See
<github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer> for more
details. The run-time behavior can be influenced using the
LSAN_OPTIONSenvironment variable. The option cannot be combined with -fsanitize=thread.
- -fsanitize=undefined
-
Enable UndefinedBehaviorSanitizer, a fast undefined behavior detector.
Various computations are instrumented to detect undefined behavior
at runtime. Current suboptions are:
-
- -fsanitize=shift
-
This option enables checking that the result of a shift operation is
not undefined. Note that what exactly is considered undefined differs
slightly between C and C++, as well as betweenISO C90and C99, etc. This option has two suboptions, -fsanitize=shift-base and -fsanitize=shift-exponent.
- -fsanitize=shift-exponent
- This option enables checking that the second argument of a shift operation is not negative and is smaller than the precision of the promoted first argument.
- -fsanitize=shift-base
-
If the second argument of a shift operation is within range, check that the
result of a shift operation is not undefined. Note that what exactly is
considered undefined differs slightly between C and C++, as well as betweenISO C90and C99, etc.
- -fsanitize=integer-divide-by-zero
- Detect integer division by zero as well as "INT_MIN / -1" division.
- -fsanitize=unreachable
- With this option, the compiler turns the "__builtin_unreachable" call into a diagnostics message call instead. When reaching the "__builtin_unreachable" call, the behavior is undefined.
- -fsanitize=vla-bound
- This option instructs the compiler to check that the size of a variable length array is positive.
- -fsanitize=null
-
This option enables pointer checking. Particularly, the application
built with this option turned on will issue an error message when it
tries to dereference a NULLpointer, or if a reference (possibly an rvalue reference) is bound to aNULLpointer, or if a method is invoked on an object pointed by aNULLpointer.
- -fsanitize=return
-
This option enables return statement checking. Programs
built with this option turned on will issue an error message
when the end of a non-void function is reached without actually
returning a value. This option works in C++only.
- -fsanitize=signed-integer-overflow
-
This option enables signed integer overflow checking. We check that
the result of "+", "*", and both unary and binary "-"
does not overflow in the signed arithmetics. Note, integer promotion
rules must be taken into account. That is, the following is not an
overflow:
signed char a = SCHAR_MAX; a++;
- -fsanitize=bounds
- This option enables instrumentation of array bounds. Various out of bounds accesses are detected. Flexible array members, flexible array member-like arrays, and initializers of variables with static storage are not instrumented. The option cannot be combined with -fcheck-pointer-bounds.
- -fsanitize=bounds-strict
- This option enables strict instrumentation of array bounds. Most out of bounds accesses are detected, including flexible array members and flexible array member-like arrays. Initializers of variables with static storage are not instrumented. The option cannot be combined with -fcheck-pointer-bounds.
- -fsanitize=alignment
- This option enables checking of alignment of pointers when they are dereferenced, or when a reference is bound to insufficiently aligned target, or when a method or constructor is invoked on insufficiently aligned object.
- -fsanitize=object-size
- This option enables instrumentation of memory references using the "__builtin_object_size" function. Various out of bounds pointer accesses are detected.
- -fsanitize=float-divide-by-zero
- Detect floating-point division by zero. Unlike other similar options, -fsanitize=float-divide-by-zero is not enabled by -fsanitize=undefined, since floating-point division by zero can be a legitimate way of obtaining infinities and NaNs.
- -fsanitize=float-cast-overflow
- This option enables floating-point type to integer conversion checking. We check that the result of the conversion does not overflow. Unlike other similar options, -fsanitize=float-cast-overflow is not enabled by -fsanitize=undefined. This option does not work well with "FE_INVALID" exceptions enabled.
- -fsanitize=nonnull-attribute
- This option enables instrumentation of calls, checking whether null values are not passed to arguments marked as requiring a non-null value by the "nonnull" function attribute.
- -fsanitize=returns-nonnull-attribute
- This option enables instrumentation of return statements in functions marked with "returns_nonnull" function attribute, to detect returning of null values from such functions.
- -fsanitize=bool
- This option enables instrumentation of loads from bool. If a value other than 0/1 is loaded, a run-time error is issued.
- -fsanitize=enum
- This option enables instrumentation of loads from an enum type. If a value outside the range of values for the enum type is loaded, a run-time error is issued.
- -fsanitize=vptr
-
This option enables instrumentation of C++member function calls, member accesses and some conversions between pointers to base and derived classes, to verify the referenced object has the correct dynamic type.
-
While -ftrapv causes traps for signed overflows to be emitted, -fsanitize=undefined gives a diagnostic message. This currently works only for the C family of languages.
-
- -fno-sanitize=all
- This option disables all previously enabled sanitizers. -fsanitize=all is not allowed, as some sanitizers cannot be used together.
- -fasan-shadow-offset=number
-
This option forces GCCto use custom shadow offset in AddressSanitizer checks. It is useful for experimenting with different shadow memory layouts in Kernel AddressSanitizer.
- -fsanitize-sections=s1,s2,...
- Sanitize global variables in selected user-defined sections. si may contain wildcards.
- -fsanitize-recover[=opts]
-
-fsanitize-recover= controls error recovery mode for sanitizers
mentioned in comma-separated list of opts. Enabling this option
for a sanitizer component causes it to attempt to continue
running the program as if no error happened. This means multiple
runtime errors can be reported in a single program run, and the exit
code of the program may indicate success even when errors
have been reported. The -fno-sanitize-recover= option
can be used to alter
this behavior: only the first detected error is reported
and program then exits with a non-zero exit code.
Currently this feature only works for -fsanitize=undefined (and its suboptions except for -fsanitize=unreachable and -fsanitize=return), -fsanitize=float-cast-overflow, -fsanitize=float-divide-by-zero, -fsanitize=bounds-strict, -fsanitize=kernel-address and -fsanitize=address. For these sanitizers error recovery is turned on by default, except -fsanitize=address, for which this feature is experimental. -fsanitize-recover=all and -fno-sanitize-recover=all is also accepted, the former enables recovery for all sanitizers that support it, the latter disables recovery for all sanitizers that support it.
Even if a recovery mode is turned on the compiler side, it needs to be also enabled on the runtime library side, otherwise the failures are still fatal. The runtime library defaults to "halt_on_error=0" for ThreadSanitizer and UndefinedBehaviorSanitizer, while default value for AddressSanitizer is "halt_on_error=1". This can be overridden through setting the "halt_on_error" flag in the corresponding environment variable.
Syntax without an explicit opts parameter is deprecated. It is equivalent to specifying an opts list of:
undefined,float-cast-overflow,float-divide-by-zero,bounds-strict
- -fsanitize-address-use-after-scope
- Enable sanitization of local variables to detect use-after-scope bugs. The option sets -fstack-reuse to none.
- -fsanitize-undefined-trap-on-error
- The -fsanitize-undefined-trap-on-error option instructs the compiler to report undefined behavior using "__builtin_trap" rather than a "libubsan" library routine. The advantage of this is that the "libubsan" library is not needed and is not linked in, so this is usable even in freestanding environments.
- -fsanitize-coverage=trace-pc
- Enable coverage-guided fuzzing code instrumentation. Inserts a call to "__sanitizer_cov_trace_pc" into every basic block.
- -fbounds-check
- For front ends that support it, generate additional code to check that indices used to access arrays are within the declared range. This is currently only supported by the Fortran front end, where this option defaults to false.
- -fcheck-pointer-bounds
-
Enable Pointer Bounds Checker instrumentation. Each memory reference
is instrumented with checks of the pointer used for memory access against
bounds associated with that pointer.
Currently there is only an implementation for Intel
MPXavailable, thus x86 GNU/Linux target and -mmpx are required to enable this feature. MPX-based instrumentation requires a runtime library to enableMPXin hardware and handle bounds violation signals. By default when -fcheck-pointer-bounds and -mmpx options are used to link a program, theGCCdriver links against the libmpx and libmpxwrappers libraries. Bounds checking on calls to dynamic libraries requires a linker with -z bndplt support; ifGCCwas configured with a linker without support for this option (including the Gold linker and older versions of ld), a warning is given if you link with -mmpx without also specifying -static, since the overall effectiveness of the bounds checking protection is reduced. See also -static-libmpxwrappers.MPX-based instrumentation may be used for debugging and also may be included in production code to increase program security. Depending on usage, you may have different requirements for the runtime library. The current version of the
MPXruntime library is more oriented for use as a debugging tool.MPXruntime library usage implies -lpthread. See also -static-libmpx. The runtime library behavior can be influenced using various CHKP_RT_* environment variables. See <gcc.gnu.org/wiki/Intel%20MPX%20support%20in%20the%20GCC%20compiler> for more details.Generated instrumentation may be controlled by various -fchkp-* options and by the "bnd_variable_size" structure field attribute and "bnd_legacy", and "bnd_instrument" function attributes.
GCCalso provides a number of built-in functions for controlling the Pointer Bounds Checker. - -fchkp-check-incomplete-type
- Generate pointer bounds checks for variables with incomplete type. Enabled by default.
- -fchkp-narrow-bounds
- Controls bounds used by Pointer Bounds Checker for pointers to object fields. If narrowing is enabled then field bounds are used. Otherwise object bounds are used. See also -fchkp-narrow-to-innermost-array and -fchkp-first-field-has-own-bounds. Enabled by default.
- -fchkp-first-field-has-own-bounds
- Forces Pointer Bounds Checker to use narrowed bounds for the address of the first field in the structure. By default a pointer to the first field has the same bounds as a pointer to the whole structure.
- -fchkp-flexible-struct-trailing-arrays
- Forces Pointer Bounds Checker to treat all trailing arrays in structures as possibly flexible. By default only array fields with zero length or that are marked with attribute bnd_variable_size are treated as flexible.
- -fchkp-narrow-to-innermost-array
- Forces Pointer Bounds Checker to use bounds of the innermost arrays in case of nested static array access. By default this option is disabled and bounds of the outermost array are used.
- -fchkp-optimize
- Enables Pointer Bounds Checker optimizations. Enabled by default at optimization levels -O, -O2, -O3.
- -fchkp-use-fast-string-functions
- Enables use of *_nobnd versions of string functions (not copying bounds) by Pointer Bounds Checker. Disabled by default.
- -fchkp-use-nochk-string-functions
- Enables use of *_nochk versions of string functions (not checking bounds) by Pointer Bounds Checker. Disabled by default.
- -fchkp-use-static-bounds
- Allow Pointer Bounds Checker to generate static bounds holding bounds of static variables. Enabled by default.
- -fchkp-use-static-const-bounds
- Use statically-initialized bounds for constant bounds instead of generating them each time they are required. By default enabled when -fchkp-use-static-bounds is enabled.
- -fchkp-treat-zero-dynamic-size-as-infinite
- With this option, objects with incomplete type whose dynamically-obtained size is zero are treated as having infinite size instead by Pointer Bounds Checker. This option may be helpful if a program is linked with a library missing size information for some symbols. Disabled by default.
- -fchkp-check-read
- Instructs Pointer Bounds Checker to generate checks for all read accesses to memory. Enabled by default.
- -fchkp-check-write
- Instructs Pointer Bounds Checker to generate checks for all write accesses to memory. Enabled by default.
- -fchkp-store-bounds
- Instructs Pointer Bounds Checker to generate bounds stores for pointer writes. Enabled by default.
- -fchkp-instrument-calls
- Instructs Pointer Bounds Checker to pass pointer bounds to calls. Enabled by default.
- -fchkp-instrument-marked-only
- Instructs Pointer Bounds Checker to instrument only functions marked with the "bnd_instrument" attribute. Disabled by default.
- -fchkp-use-wrappers
-
Allows Pointer Bounds Checker to replace calls to built-in functions
with calls to wrapper functions. When -fchkp-use-wrappers
is used to link a program, the GCCdriver automatically links against libmpxwrappers. See also -static-libmpxwrappers. Enabled by default.
- -fstack-protector
- Emit extra code to check for buffer overflows, such as stack smashing attacks. This is done by adding a guard variable to functions with vulnerable objects. This includes functions that call "alloca", and functions with buffers larger than 8 bytes. The guards are initialized when a function is entered and then checked when the function exits. If a guard check fails, an error message is printed and the program exits.
- -fstack-protector-all
- Like -fstack-protector except that all functions are protected.
- -fstack-protector-strong
- Like -fstack-protector but includes additional functions to be protected --- those that have local array definitions, or have references to local frame addresses.
- -fstack-protector-explicit
- Like -fstack-protector but only protects those functions which have the "stack_protect" attribute.
- -fstack-check
-
Generate code to verify that you do not go beyond the boundary of the
stack. You should specify this flag if you are running in an
environment with multiple threads, but you only rarely need to specify it in
a single-threaded environment since stack overflow is automatically
detected on nearly all systems if there is only one stack.
Note that this switch does not actually cause checking to be done; the operating system or the language runtime must do that. The switch causes generation of code to ensure that they see the stack being extended.
You can additionally specify a string parameter: no means no checking, generic means force the use of old-style checking, specific means use the best checking method and is equivalent to bare -fstack-check.
Old-style checking is a generic mechanism that requires no specific target support in the compiler but comes with the following drawbacks:
-
- 1.
- Modified allocation strategy for large objects: they are always allocated dynamically if their size exceeds a fixed threshold.
- 2.
- Fixed limit on the size of the static frame of functions: when it is topped by a particular function, stack checking is not reliable and a warning is issued by the compiler.
- 3.
- Inefficiency: because of both the modified allocation strategy and the generic implementation, code performance is hampered.
-
Note that old-style stack checking is also the fallback method for specific if no target support has been added in the compiler.
-
- -fstack-limit-register=reg
- -fstack-limit-symbol=sym
- -fno-stack-limit
-
Generate code to ensure that the stack does not grow beyond a certain value,
either the value of a register or the address of a symbol. If a larger
stack is required, a signal is raised at run time. For most targets,
the signal is raised before the stack overruns the boundary, so
it is possible to catch the signal without taking special precautions.
For instance, if the stack starts at absolute address 0x80000000 and grows downwards, you can use the flags -fstack-limit-symbol=__stack_limit and -Wl,--defsym,__stack_limit=0x7ffe0000 to enforce a stack limit of 128KB. Note that this may only work with the
GNUlinker.You can locally override stack limit checking by using the "no_stack_limit" function attribute.
- -fsplit-stack
-
Generate code to automatically split the stack before it overflows.
The resulting program has a discontiguous stack which can only
overflow if the program is unable to allocate any more memory. This
is most useful when running threaded programs, as it is no longer
necessary to calculate a good stack size to use for each thread. This
is currently only implemented for the x86 targets running
GNU/Linux.
When code compiled with -fsplit-stack calls code compiled without -fsplit-stack, there may not be much stack space available for the latter code to run. If compiling all code, including library code, with -fsplit-stack is not an option, then the linker can fix up these calls so that the code compiled without -fsplit-stack always has a large stack. Support for this is implemented in the gold linker in
GNUbinutils release 2.21 and later. - -fvtable-verify=[std|preinit|none]
-
This option is only available when compiling C++code. It turns on (or off, if using -fvtable-verify=none) the security feature that verifies at run time, for every virtual call, that the vtable pointer through which the call is made is valid for the type of the object, and has not been corrupted or overwritten. If an invalid vtable pointer is detected at run time, an error is reported and execution of the program is immediately halted.
This option causes run-time data structures to be built at program startup, which are used for verifying the vtable pointers. The options std and preinit control the timing of when these data structures are built. In both cases the data structures are built before execution reaches "main". Using -fvtable-verify=std causes the data structures to be built after shared libraries have been loaded and initialized. -fvtable-verify=preinit causes them to be built before shared libraries have been loaded and initialized.
If this option appears multiple times in the command line with different values specified, none takes highest priority over both std and preinit; preinit takes priority over std.
- -fvtv-debug
-
When used in conjunction with -fvtable-verify=std or
-fvtable-verify=preinit, causes debug versions of the
runtime functions for the vtable verification feature to be called.
This flag also causes the compiler to log information about which
vtable pointers it finds for each class.
This information is written to a file named vtv_set_ptr_data.log
in the directory named by the environment variable VTV_LOGS_DIRif that is defined or the current working directory otherwise.
Note: This feature appends data to the log file. If you want a fresh log file, be sure to delete any existing one.
- -fvtv-counts
-
This is a debugging flag. When used in conjunction with
-fvtable-verify=std or -fvtable-verify=preinit, this
causes the compiler to keep track of the total number of virtual calls
it encounters and the number of verifications it inserts. It also
counts the number of calls to certain run-time library functions
that it inserts and logs this information for each compilation unit.
The compiler writes this information to a file named
vtv_count_data.log in the directory named by the environment
variable VTV_LOGS_DIRif that is defined or the current working directory otherwise. It also counts the size of the vtable pointer sets for each class, and writes this information to vtv_class_set_sizes.log in the same directory.
Note: This feature appends data to the log files. To get fresh log files, be sure to delete any existing ones.
- -finstrument-functions
-
Generate instrumentation calls for entry and exit to functions. Just
after function entry and just before function exit, the following
profiling functions are called with the address of the current
function and its call site. (On some platforms,
"__builtin_return_address" does not work beyond the current
function, so the call site information may not be available to the
profiling functions otherwise.)
void __cyg_profile_func_enter (void *this_fn, void *call_site); void __cyg_profile_func_exit (void *this_fn, void *call_site);
The first argument is the address of the start of the current function, which may be looked up exactly in the symbol table.
This instrumentation is also done for functions expanded inline in other functions. The profiling calls indicate where, conceptually, the inline function is entered and exited. This means that addressable versions of such functions must be available. If all your uses of a function are expanded inline, this may mean an additional expansion of code size. If you use "extern inline" in your C code, an addressable version of such functions must be provided. (This is normally the case anyway, but if you get lucky and the optimizer always expands the functions inline, you might have gotten away without providing static copies.)
A function may be given the attribute "no_instrument_function", in which case this instrumentation is not done. This can be used, for example, for the profiling functions listed above, high-priority interrupt routines, and any functions from which the profiling functions cannot safely be called (perhaps signal handlers, if the profiling routines generate output or allocate memory).
- -finstrument-functions-exclude-file-list=file,file,...
-
Set the list of functions that are excluded from instrumentation (see
the description of -finstrument-functions). If the file that
contains a function definition matches with one of file, then
that function is not instrumented. The match is done on substrings:
if the file parameter is a substring of the file name, it is
considered to be a match.
For example:
-finstrument-functions-exclude-file-list=/bits/stl,include/sys
excludes any inline function defined in files whose pathnames contain /bits/stl or include/sys.
If, for some reason, you want to include letter , in one of sym, write ,. For example, -finstrument-functions-exclude-file-list=',,tmp' (note the single quote surrounding the option).
- -finstrument-functions-exclude-function-list=sym,sym,...
-
This is similar to -finstrument-functions-exclude-file-list,
but this option sets the list of function names to be excluded from
instrumentation. The function name to be matched is its user-visible
name, such as "vector<int> blah(const vector<int> &)", not the
internal mangled name (e.g., "_Z4blahRSt6vectorIiSaIiEE"). The
match is done on substrings: if the sym parameter is a substring
of the function name, it is considered to be a match. For C99 and C++extended identifiers, the function name must be given inUTF-8,not using universal character names.
Options Controlling the Preprocessor
These options control the C preprocessor, which is run on each C source file before actual compilation.If you use the -E option, nothing is done except preprocessing. Some of these options make sense only together with -E because they cause the preprocessor output to be unsuitable for actual compilation.
In addition to the options listed here, there are a number of options to control search paths for include files documented in Directory Options. Options to control preprocessor diagnostics are listed in Warning Options.
- -D name
- Predefine name as a macro, with definition 1.
- -D name=definition
-
The contents of definition are tokenized and processed as if
they appeared during translation phase three in a #define
directive. In particular, the definition is truncated by
embedded newline characters.
If you are invoking the preprocessor from a shell or shell-like program you may need to use the shell's quoting syntax to protect characters such as spaces that have a meaning in the shell syntax.
If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals sign (if any). Parentheses are meaningful to most shells, so you should quote the option. With sh and csh, -D'name(args...)=definition' works.
-D and -U options are processed in the order they are given on the command line. All -imacros file and -include file options are processed after all -D and -U options.
- -U name
- Cancel any previous definition of name, either built in or provided with a -D option.
- -include file
-
Process file as if "#include "file"" appeared as the first
line of the primary source file. However, the first directory searched
for file is the preprocessor's working directory instead of
the directory containing the main source file. If not found there, it
is searched for in the remainder of the "#include "..."" search
chain as normal.
If multiple -include options are given, the files are included in the order they appear on the command line.
- -imacros file
-
Exactly like -include, except that any output produced by
scanning file is thrown away. Macros it defines remain defined.
This allows you to acquire all the macros from a header without also
processing its declarations.
All files specified by -imacros are processed before all files specified by -include.
- -undef
- Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined.
- -pthread
-
Define additional macros required for using the POSIXthreads library. You should use this option consistently for both compilation and linking. This option is supported on GNU/Linux targets, most other Unix derivatives, and also on x86 Cygwin and MinGW targets.
- -M
-
Instead of outputting the result of preprocessing, output a rule
suitable for make describing the dependencies of the main
source file. The preprocessor outputs one make rule containing
the object file name for that source file, a colon, and the names of all
the included files, including those coming from -include or
-imacros command-line options.
Unless specified explicitly (with -MT or -MQ), the object file name consists of the name of the source file with any suffix replaced with object file suffix and with any leading directory parts removed. If there are many included files then the rule is split into several lines using \-newline. The rule has no commands.
This option does not suppress the preprocessor's debug output, such as -dM. To avoid mixing such debug output with the dependency rules you should explicitly specify the dependency output file with -MF, or use an environment variable like
DEPENDENCIES_OUTPUT. Debug output is still sent to the regular output stream as normal.Passing -M to the driver implies -E, and suppresses warnings with an implicit -w.
- -MM
-
Like -M but do not mention header files that are found in
system header directories, nor header files that are included,
directly or indirectly, from such a header.
This implies that the choice of angle brackets or double quotes in an #include directive does not in itself determine whether that header appears in -MM dependency output.
- -MF file
-
When used with -M or -MM, specifies a
file to write the dependencies to. If no -MF switch is given
the preprocessor sends the rules to the same place it would send
preprocessed output.
When used with the driver options -MD or -MMD, -MF overrides the default dependency output file.
- -MG
-
In conjunction with an option such as -M requesting
dependency generation, -MG assumes missing header files are
generated files and adds them to the dependency list without raising
an error. The dependency filename is taken directly from the
"#include" directive without prepending any path. -MG
also suppresses preprocessed output, as a missing header file renders
this useless.
This feature is used in automatic updating of makefiles.
- -MP
-
This option instructs CPPto add a phony target for each dependency other than the main file, causing each to depend on nothing. These dummy rules work around errors make gives if you remove header files without updating the Makefile to match.
This is typical output:
test.o: test.c test.h test.h:
- -MT target
-
Change the target of the rule emitted by dependency generation. By
default CPPtakes the name of the main input file, deletes any directory components and any file suffix such as .c, and appends the platform's usual object suffix. The result is the target.
An -MT option sets the target to be exactly the string you specify. If you want multiple targets, you can specify them as a single argument to -MT, or use multiple -MT options.
For example, -MT '$(objpfx)foo.o' might give
$(objpfx)foo.o: foo.c
- -MQ target
-
Same as -MT, but it quotes any characters which are special to
Make. -MQ '$(objpfx)foo.o' gives
$$(objpfx)foo.o: foo.c
The default target is automatically quoted, as if it were given with -MQ.
- -MD
-
-MD is equivalent to -M -MF file, except that
-E is not implied. The driver determines file based on
whether an -o option is given. If it is, the driver uses its
argument but with a suffix of .d, otherwise it takes the name
of the input file, removes any directory components and suffix, and
applies a .d suffix.
If -MD is used in conjunction with -E, any -o switch is understood to specify the dependency output file, but if used without -E, each -o is understood to specify a target object file.
Since -E is not implied, -MD can be used to generate a dependency output file as a side-effect of the compilation process.
- -MMD
- Like -MD except mention only user header files, not system header files.
- -fpreprocessed
-
Indicate to the preprocessor that the input file has already been
preprocessed. This suppresses things like macro expansion, trigraph
conversion, escaped newline splicing, and processing of most directives.
The preprocessor still recognizes and removes comments, so that you can
pass a file preprocessed with -C to the compiler without
problems. In this mode the integrated preprocessor is little more than
a tokenizer for the front ends.
-fpreprocessed is implicit if the input file has one of the extensions .i, .ii or .mi. These are the extensions that
GCCuses for preprocessed files created by -save-temps. - -fdirectives-only
-
When preprocessing, handle directives, but do not expand macros.
The option's behavior depends on the -E and -fpreprocessed options.
With -E, preprocessing is limited to the handling of directives such as "#define", "#ifdef", and "#error". Other preprocessor operations, such as macro expansion and trigraph conversion are not performed. In addition, the -dD option is implicitly enabled.
With -fpreprocessed, predefinition of command line and most builtin macros is disabled. Macros such as "__LINE__", which are contextually dependent, are handled normally. This enables compilation of files previously preprocessed with "-E -fdirectives-only".
With both -E and -fpreprocessed, the rules for -fpreprocessed take precedence. This enables full preprocessing of files previously preprocessed with "-E -fdirectives-only".
- -fdollars-in-identifiers
- Accept $ in identifiers.
- -fextended-identifiers
-
Accept universal character names in identifiers. This option is
enabled by default for C99 (and later C standard versions) and C++.
- -fno-canonical-system-headers
- When preprocessing, do not shorten system header paths with canonicalization.
- -ftabstop=width
- Set the distance between tab stops. This helps the preprocessor report correct column numbers in warnings or errors, even if tabs appear on the line. If the value is less than 1 or greater than 100, the option is ignored. The default is 8.
- -ftrack-macro-expansion[=level]
-
Track locations of tokens across macro expansions. This allows the
compiler to emit diagnostic about the current macro expansion stack
when a compilation error occurs in a macro expansion. Using this
option makes the preprocessor and the compiler consume more
memory. The level parameter can be used to choose the level of
precision of token location tracking thus decreasing the memory
consumption if necessary. Value 0 of level de-activates
this option. Value 1 tracks tokens locations in a
degraded mode for the sake of minimal memory overhead. In this mode
all tokens resulting from the expansion of an argument of a
function-like macro have the same location. Value 2 tracks
tokens locations completely. This value is the most memory hungry.
When this option is given no argument, the default parameter value is
2.
Note that "-ftrack-macro-expansion=2" is activated by default.
- -fexec-charset=charset
-
Set the execution character set, used for string and character
constants. The default is UTF-8.charset can be any encoding supported by the system's "iconv" library routine.
- -fwide-exec-charset=charset
-
Set the wide execution character set, used for wide string and
character constants. The default is UTF-32orUTF-16,whichever corresponds to the width of "wchar_t". As with -fexec-charset, charset can be any encoding supported by the system's "iconv" library routine; however, you will have problems with encodings that do not fit exactly in "wchar_t".
- -finput-charset=charset
-
Set the input character set, used for translation from the character
set of the input file to the source character set used by GCC.If the locale does not specify, orGCCcannot get this information from the locale, the default isUTF-8.This can be overridden by either the locale or this command-line option. Currently the command-line option takes precedence if there's a conflict. charset can be any encoding supported by the system's "iconv" library routine.
- -fpch-deps
- When using precompiled headers, this flag causes the dependency-output flags to also list the files from the precompiled header's dependencies. If not specified, only the precompiled header are listed and not the files that were used to create it, because those files are not consulted when a precompiled header is used.
- -fpch-preprocess
-
This option allows use of a precompiled header together with -E. It inserts a special "#pragma",
"#pragma GCC pch_preprocess "filename"" in the output to mark
the place where the precompiled header was found, and its filename.
When -fpreprocessed is in use, GCCrecognizes this "#pragma" and loads thePCH.
This option is off by default, because the resulting preprocessed output is only really suitable as input to
GCC.It is switched on by -save-temps.You should not write this "#pragma" in your own code, but it is safe to edit the filename if the
PCHfile is available in a different location. The filename may be absolute or it may be relative toGCC's current directory. - -fworking-directory
-
Enable generation of linemarkers in the preprocessor output that
let the compiler know the current working directory at the time of
preprocessing. When this option is enabled, the preprocessor
emits, after the initial linemarker, a second linemarker with the
current working directory followed by two slashes. GCCuses this directory, when it's present in the preprocessed input, as the directory emitted as the current working directory in some debugging information formats. This option is implicitly enabled if debugging information is enabled, but this can be inhibited with the negated form -fno-working-directory. If the -P flag is present in the command line, this option has no effect, since no "#line" directives are emitted whatsoever.
- -A predicate=answer
- Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form -A predicate(answer), which is still supported, because it does not use shell special characters.
- -A -predicate=answer
- Cancel an assertion with the predicate predicate and answer answer.
- -C
-
Do not discard comments. All comments are passed through to the output
file, except for comments in processed directives, which are deleted
along with the directive.
You should be prepared for side effects when using -C; it causes the preprocessor to treat comments as tokens in their own right. For example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordinary source line, since the first token on the line is no longer a #.
- -CC
-
Do not discard comments, including during macro expansion. This is
like -C, except that comments contained within macros are
also passed through to the output file where the macro is expanded.
In addition to the side-effects of the -C option, the -CC option causes all C
++-style comments inside a macro to be converted to C-style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line.The -CC option is generally used to support lint comments.
- -P
- Inhibit generation of linemarkers in the output from the preprocessor. This might be useful when running the preprocessor on something that is not C code, and will be sent to a program which might be confused by the linemarkers.
- -traditional
- -traditional-cpp
-
Try to imitate the behavior of pre-standard C preprocessors, as
opposed to ISO Cpreprocessors. See theGNU CPPmanual for details.
Note that
GCCdoes not otherwise attempt to emulate a pre-standard C compiler, and these options are only supported with the -E switch, or when invokingCPPexplicitly. - -trigraphs
-
Support ISO Ctrigraphs. These are three-character sequences, all starting with ??, that are defined byISO Cto stand for single characters. For example, ??/ stands for \, so '??/n' is a character constant for a newline.
The nine trigraphs and their replacements are
Trigraph: ??( ??) ??< ??> ??= ??/ ??' ??! ??- Replacement: [ ] { } # \ ^ | ~
By default,
GCCignores trigraphs, but in standard-conforming modes it converts them. See the -std and -ansi options. - -remap
- Enable special code to work around file systems which only permit very short file names, such as MS-DOS.
- -H
- Print the name of each header file used, in addition to other normal activities. Each name is indented to show how deep in the #include stack it is. Precompiled header files are also printed, even if they are found to be invalid; an invalid precompiled header file is printed with ...x and a valid one with ...! .
- -dletters
-
Says to make debugging dumps during compilation as specified by
letters. The flags documented here are those relevant to the
preprocessor. Other letters are interpreted
by the compiler proper, or reserved for future versions of GCC,and so are silently ignored. If you specify letters whose behavior conflicts, the result is undefined.
-
- -dM
-
Instead of the normal output, generate a list of #define
directives for all the macros defined during the execution of the
preprocessor, including predefined macros. This gives you a way of
finding out what is predefined in your version of the preprocessor.
Assuming you have no file foo.h, the command
touch foo.h; cpp -dM foo.h
shows all the predefined macros.
If you use -dM without the -E option, -dM is interpreted as a synonym for -fdump-rtl-mach.
- -dD
- Like -dM except in two respects: it does not include the predefined macros, and it outputs both the #define directives and the result of preprocessing. Both kinds of output go to the standard output file.
- -dN
- Like -dD, but emit only the macro names, not their expansions.
- -dI
- Output #include directives in addition to the result of preprocessing.
- -dU
- Like -dD except that only macros that are expanded, or whose definedness is tested in preprocessor directives, are output; the output is delayed until the use or test of the macro; and #undef directives are also output for macros tested but undefined at the time.
-
- -fdebug-cpp
-
This option is only useful for debugging GCC.When used fromCPPor with -E, it dumps debugging information about location maps. Every token in the output is preceded by the dump of the map its location belongs to.
When used from
GCCwithout -E, this option has no effect. - -Wp,option
- You can use -Wp,option to bypass the compiler driver and pass option directly through to the preprocessor. If option contains commas, it is split into multiple options at the commas. However, many options are modified, translated or interpreted by the compiler driver before being passed to the preprocessor, and -Wp forcibly bypasses this phase. The preprocessor's direct interface is undocumented and subject to change, so whenever possible you should avoid using -Wp and let the driver handle the options instead.
- -Xpreprocessor option
-
Pass option as an option to the preprocessor. You can use this to
supply system-specific preprocessor options that GCCdoes not recognize.
If you want to pass an option that takes an argument, you must use -Xpreprocessor twice, once for the option and once for the argument.
- -no-integrated-cpp
-
Perform preprocessing as a separate pass before compilation.
By default, GCCperforms preprocessing as an integrated part of input tokenization and parsing. If this option is provided, the appropriate language front end (cc1, cc1plus, or cc1obj for C, C++, and Objective-C, respectively) is instead invoked twice, once for preprocessing only and once for actual compilation of the preprocessed input. This option may be useful in conjunction with the -B or -wrapper options to specify an alternate preprocessor or perform additional processing of the program source between normal preprocessing and compilation.
Passing Options to the Assembler
You can pass options to the assembler.- -Wa,option
- Pass option as an option to the assembler. If option contains commas, it is split into multiple options at the commas.
- -Xassembler option
-
Pass option as an option to the assembler. You can use this to
supply system-specific assembler options that GCCdoes not recognize.
If you want to pass an option that takes an argument, you must use -Xassembler twice, once for the option and once for the argument.
Options for Linking
These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step.- object-file-name
- A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file contents.) If linking is done, these object files are used as input to the linker.
- -c
- -S
- -E
- If any of these options is used, then the linker is not run, and object file names should not be used as arguments.
- -fuse-ld=bfd
- Use the bfd linker instead of the default linker.
- -fuse-ld=gold
- Use the gold linker instead of the default linker.
- -fuse-ld=lld
-
Use the LLVMlld linker instead of the default linker.
- -llibrary
- -l library
-
Search the library named library when linking. (The second
alternative with the library as a separate argument is only for
POSIXcompliance and is not recommended.)
It makes a difference where in the command you write this option; the linker searches and processes libraries and object files in the order they are specified. Thus, foo.o -lz bar.o searches library z after file foo.o but before bar.o. If bar.o refers to functions in z, those functions may not be loaded.
The linker searches a standard list of directories for the library, which is actually a file named liblibrary.a. The linker then uses this file as if it had been specified precisely by name.
The directories searched include several standard system directories plus any that you specify with -L.
Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is found is an ordinary object file, it is linked in the usual fashion. The only difference between using an -l option and specifying a file name is that -l surrounds library with lib and .a and searches several directories.
- -lobjc
-
You need this special case of the -l option in order to
link an Objective-C or Objective-C++program.
- -nostartfiles
- Do not use the standard system startup files when linking. The standard system libraries are used normally, unless -nostdlib or -nodefaultlibs is used.
- -nodefaultlibs
-
Do not use the standard system libraries when linking.
Only the libraries you specify are passed to the linker, and options
specifying linkage of the system libraries, such as -static-libgcc
or -shared-libgcc, are ignored.
The standard startup files are used normally, unless -nostartfiles
is used.
The compiler may generate calls to "memcmp", "memset", "memcpy" and "memmove". These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified.
- -nostdlib
-
Do not use the standard system startup files or libraries when linking.
No startup files and only the libraries you specify are passed to
the linker, and options specifying linkage of the system libraries, such as
-static-libgcc or -shared-libgcc, are ignored.
The compiler may generate calls to "memcmp", "memset", "memcpy" and "memmove". These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified.
One of the standard libraries bypassed by -nostdlib and -nodefaultlibs is libgcc.a, a library of internal subroutines which
GCCuses to overcome shortcomings of particular machines, or special needs for some languages.In most cases, you need libgcc.a even when you want to avoid other standard libraries. In other words, when you specify -nostdlib or -nodefaultlibs you should usually specify -lgcc as well. This ensures that you have no unresolved references to internal
GCClibrary subroutines. (An example of such an internal subroutine is "__main", used to ensure C++constructors are called.) - -pie
- Produce a position independent executable on targets that support it. For predictable results, you must also specify the same set of options used for compilation (-fpie, -fPIE, or model suboptions) when you specify this linker option.
- -no-pie
- Don't produce a position independent executable.
- -pthread
-
Link with the POSIXthreads library. This option is supported on GNU/Linux targets, most other Unix derivatives, and also on x86 Cygwin and MinGW targets. On some targets this option also sets flags for the preprocessor, so it should be used consistently for both compilation and linking.
- -rdynamic
-
Pass the flag -export-dynamic to the ELFlinker, on targets that support it. This instructs the linker to add all symbols, not only used ones, to the dynamic symbol table. This option is needed for some uses of "dlopen" or to allow obtaining backtraces from within a program.
- -s
- Remove all symbol table and relocation information from the executable.
- -static
- On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect.
- -shared
- Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. For predictable results, you must also specify the same set of options used for compilation (-fpic, -fPIC, or model suboptions) when you specify this linker option.[1]
- -shared-libgcc
- -static-libgcc
-
On systems that provide libgcc as a shared library, these options
force the use of either the shared or static version, respectively.
If no shared version of libgcc was built when the compiler was
configured, these options have no effect.
There are several situations in which an application should use the shared libgcc instead of the static version. The most common of these is when the application wishes to throw and catch exceptions across different shared libraries. In that case, each of the libraries as well as the application itself should use the shared libgcc.
Therefore, the G++ and driver automatically adds -shared-libgcc
whenever you build a shared library or a main executable, because C++
programs typically use exceptions, so this is the right thing to do.If, instead, you use the
GCCdriver to create shared libraries, you may find that they are not always linked with the shared libgcc. IfGCCfinds, at its configuration time, that you have a non-GNU linker or aGNUlinker that does not support option --eh-frame-hdr, it links the shared version of libgcc into shared libraries by default. Otherwise, it takes advantage of the linker and optimizes away the linking with the shared version of libgcc, linking with the static version of libgcc by default. This allows exceptions to propagate through such shared libraries, without incurring relocation costs at library load time.However, if a library or main executable is supposed to throw or catch exceptions, you must link it using the G++ driver, as appropriate for the languages used in the program, or using the option -shared-libgcc, such that it is linked with the shared libgcc.
- -static-libasan
-
When the -fsanitize=address option is used to link a program,
the GCCdriver automatically links against libasan. If libasan is available as a shared library, and the -static option is not used, then this links against the shared version of libasan. The -static-libasan option directs theGCCdriver to link libasan statically, without necessarily linking other libraries statically.
- -static-libtsan
-
When the -fsanitize=thread option is used to link a program,
the GCCdriver automatically links against libtsan. If libtsan is available as a shared library, and the -static option is not used, then this links against the shared version of libtsan. The -static-libtsan option directs theGCCdriver to link libtsan statically, without necessarily linking other libraries statically.
- -static-liblsan
-
When the -fsanitize=leak option is used to link a program,
the GCCdriver automatically links against liblsan. If liblsan is available as a shared library, and the -static option is not used, then this links against the shared version of liblsan. The -static-liblsan option directs theGCCdriver to link liblsan statically, without necessarily linking other libraries statically.
- -static-libubsan
-
When the -fsanitize=undefined option is used to link a program,
the GCCdriver automatically links against libubsan. If libubsan is available as a shared library, and the -static option is not used, then this links against the shared version of libubsan. The -static-libubsan option directs theGCCdriver to link libubsan statically, without necessarily linking other libraries statically.
- -static-libmpx
-
When the -fcheck-pointer bounds and -mmpx options are
used to link a program, the GCCdriver automatically links against libmpx. If libmpx is available as a shared library, and the -static option is not used, then this links against the shared version of libmpx. The -static-libmpx option directs theGCCdriver to link libmpx statically, without necessarily linking other libraries statically.
- -static-libmpxwrappers
-
When the -fcheck-pointer bounds and -mmpx options are used
to link a program without also using -fno-chkp-use-wrappers, the
GCCdriver automatically links against libmpxwrappers. If libmpxwrappers is available as a shared library, and the -static option is not used, then this links against the shared version of libmpxwrappers. The -static-libmpxwrappers option directs theGCCdriver to link libmpxwrappers statically, without necessarily linking other libraries statically.
- -static-libstdc++
-
When the g++ program is used to link a C++program, it normally automatically links against libstdc++. If libstdc++ is available as a shared library, and the -static option is not used, then this links against the shared version of libstdc++. That is normally fine. However, it is sometimes useful to freeze the version of libstdc++ used by the program without going all the way to a fully static link. The -static-libstdc++ option directs the g++ driver to link libstdc++ statically, without necessarily linking other libraries statically.
- -symbolic
- Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link editor option -Xlinker -z -Xlinker defs). Only a few systems support this option.
- -T script
-
Use script as the linker script. This option is supported by most
systems using the GNUlinker. On some targets, such as bare-board targets without an operating system, the -T option may be required when linking to avoid references to undefined symbols.
- -Xlinker option
-
Pass option as an option to the linker. You can use this to
supply system-specific linker options that GCCdoes not recognize.
If you want to pass an option that takes a separate argument, you must use -Xlinker twice, once for the option and once for the argument. For example, to pass -assert definitions, you must write -Xlinker -assert -Xlinker definitions. It does not work to write -Xlinker ``-assert definitions'', because this passes the entire string as a single argument, which is not what the linker expects.
When using the
GNUlinker, it is usually more convenient to pass arguments to linker options using the option=value syntax than as separate arguments. For example, you can specify -Xlinker -Map=output.map rather than -Xlinker -Map -Xlinker output.map. Other linkers may not support this syntax for command-line options. - -Wl,option
-
Pass option as an option to the linker. If option contains
commas, it is split into multiple options at the commas. You can use this
syntax to pass an argument to the option.
For example, -Wl,-Map,output.map passes -Map output.map to the
linker. When using the GNUlinker, you can also get the same effect with -Wl,-Map=output.map.NOTE:In Ubuntu 8.10 and later versions, forLDFLAGS,the option -Wl,-z,relro is used. To disable, use -Wl,-z,norelro.
- -u symbol
- Pretend the symbol symbol is undefined, to force linking of library modules to define it. You can use -u multiple times with different symbols to force loading of additional library modules.
- -z keyword
- -z is passed directly on to the linker along with the keyword keyword. See the section in the documentation of your linker for permitted values and their meanings.
Options for Directory Search
These options specify directories to search for header files, for libraries and for parts of the compiler:- -I dir
- -iquote dir
- -isystem dir
- -idirafter dir
-
Add the directory dir to the list of directories to be searched
for header files during preprocessing.
If dir begins with =, then the = is replaced
by the sysroot prefix; see --sysroot and -isysroot.
Directories specified with -iquote apply only to the quote form of the directive, "#include "file"". Directories specified with -I, -isystem, or -idirafter apply to lookup for both the "#include "file"" and "#include <file>" directives.
You can specify any number or combination of these options on the command line to search for header files in several directories. The lookup order is as follows:
-
- 1.
- For the quote form of the include directive, the directory of the current file is searched first.
- 2.
- For the quote form of the include directive, the directories specified by -iquote options are searched in left-to-right order, as they appear on the command line.
- 3.
- Directories specified with -I options are scanned in left-to-right order.
- 4.
- Directories specified with -isystem options are scanned in left-to-right order.
- 5.
- Standard system directories are scanned.
- 6.
- Directories specified with -idirafter options are scanned in left-to-right order.
-
You can use -I to override a system header file, substituting your own version, since these directories are searched before the standard system header file directories. However, you should not use this option to add directories that contain vendor-supplied system header files; use -isystem for that.
The -isystem and -idirafter options also mark the directory as a system directory, so that it gets the same special treatment that is applied to the standard system directories.
If a standard system include directory, or a directory specified with -isystem, is also specified with -I, the -I option is ignored. The directory is still searched but as a system directory at its normal position in the system include chain. This is to ensure that
GCC's procedure to fix buggy system headers and the ordering for the "#include_next" directive are not inadvertently changed. If you really need to change the search order for system directories, use the -nostdinc and/or -isystem options.
-
- -I-
-
Split the include path.
This option has been deprecated. Please use -iquote instead for
-I directories before the -I- and remove the -I-
option.
Any directories specified with -I options before -I- are searched only for headers requested with "#include "file""; they are not searched for "#include <file>". If additional directories are specified with -I options after the -I-, those directories are searched for all #include directives.
In addition, -I- inhibits the use of the directory of the current file directory as the first search directory for "#include "file"". There is no way to override this effect of -I-.
- -iprefix prefix
- Specify prefix as the prefix for subsequent -iwithprefix options. If the prefix represents a directory, you should include the final /.
- -iwithprefix dir
- -iwithprefixbefore dir
- Append dir to the prefix specified previously with -iprefix, and add the resulting directory to the include search path. -iwithprefixbefore puts it in the same place -I would; -iwithprefix puts it where -idirafter would.
- -isysroot dir
- This option is like the --sysroot option, but applies only to header files (except for Darwin targets, where it applies to both header files and libraries). See the --sysroot option for more information.
- -imultilib dir
-
Use dir as a subdirectory of the directory containing
target-specific C++headers.
- -nostdinc
- Do not search the standard system directories for header files. Only the directories explicitly specified with -I, -iquote, -isystem, and/or -idirafter options (and the directory of the current file, if appropriate) are searched.
- -nostdinc++
-
Do not search for header files in the C++-specific standard directories, but do still search the other standard directories. (This option is used when building the C++library.)
- -iplugindir=dir
- Set the directory to search for plugins that are passed by -fplugin=name instead of -fplugin=path/name.so. This option is not meant to be used by the user, but only passed by the driver.
- -Ldir
- Add directory dir to the list of directories to be searched for -l.
- -Bprefix
-
This option specifies where to find the executables, libraries,
include files, and data files of the compiler itself.
The compiler driver program runs one or more of the subprograms cpp, cc1, as and ld. It tries prefix as a prefix for each program it tries to run, both with and without machine/version/ for the corresponding target machine and compiler version.
For each subprogram to be run, the compiler driver first tries the -B prefix, if any. If that name is not found, or if -B is not specified, the driver tries two standard prefixes, /usr/lib/gcc/ and /usr/local/lib/gcc/. If neither of those results in a file name that is found, the unmodified program name is searched for using the directories specified in your
PATHenvironment variable.The compiler checks to see if the path provided by -B refers to a directory, and if necessary it adds a directory separator character at the end of the path.
-B prefixes that effectively specify directory names also apply to libraries in the linker, because the compiler translates these options into -L options for the linker. They also apply to include files in the preprocessor, because the compiler translates these options into -isystem options for the preprocessor. In this case, the compiler appends include to the prefix.
The runtime support file libgcc.a can also be searched for using the -B prefix, if needed. If it is not found there, the two standard prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means.
Another way to specify a prefix much like the -B prefix is to use the environment variable
GCC_EXEC_PREFIX.As a special kludge, if the path provided by -B is [dir/]stageN/, where N is a number in the range 0 to 9, then it is replaced by [dir/]include. This is to help with boot-strapping the compiler.
- -no-canonical-prefixes
- Do not expand any symbolic links, resolve references to /../ or /./, or make the path absolute when generating a relative prefix.
- --sysroot=dir
-
Use dir as the logical root directory for headers and libraries.
For example, if the compiler normally searches for headers in
/usr/include and libraries in /usr/lib, it instead
searches dir/usr/include and dir/usr/lib.
If you use both this option and the -isysroot option, then the --sysroot option applies to libraries, but the -isysroot option applies to header files.
The
GNUlinker (beginning with version 2.16) has the necessary support for this option. If your linker does not support this option, the header file aspect of --sysroot still works, but the library aspect does not. - --no-sysroot-suffix
- For some targets, a suffix is added to the root directory specified with --sysroot, depending on the other options used, so that headers may for example be found in dir/suffix/usr/include instead of dir/usr/include. This option disables the addition of such a suffix.
Options for Code Generation Conventions
These machine-independent options control the interface conventions used in code generation.Most of them have both positive and negative forms; the negative form of -ffoo is -fno-foo. In the table below, only one of the forms is listed---the one that is not the default. You can figure out the other form by either removing no- or adding it.
- -fstack-reuse=reuse-level
-
This option controls stack space reuse for user declared local/auto variables
and compiler generated temporaries. reuse_level can be all,
named_vars, or none. all enables stack reuse for all
local variables and temporaries, named_vars enables the reuse only for
user defined local variables with names, and none disables stack reuse
completely. The default value is all. The option is needed when the
program extends the lifetime of a scoped local variable or a compiler generated
temporary beyond the end point defined by the language. When a lifetime of
a variable ends, and if the variable lives in memory, the optimizing compiler
has the freedom to reuse its stack space with other temporaries or scoped
local variables whose live range does not overlap with it. Legacy code extending
local lifetime is likely to break with the stack reuse optimization.
For example,
int *p; { int local1; p = &local1; local1 = 10; .... } { int local2; local2 = 20; ... } if (*p == 10) // out of scope use of local1 { }
Another example:
struct A { A(int k) : i(k), j(k) { } int i; int j; }; A *ap; void foo(const A& ar) { ap = &ar; } void bar() { foo(A(10)); // temp object's lifetime ends when foo returns { A a(20); .... } ap->i+= 10; // ap references out of scope temp whose space // is reused with a. What is the value of ap->i? }
The lifetime of a compiler generated temporary is well defined by the C
++standard. When a lifetime of a temporary ends, and if the temporary lives in memory, the optimizing compiler has the freedom to reuse its stack space with other temporaries or scoped local variables whose live range does not overlap with it. However some of the legacy code relies on the behavior of older compilers in which temporaries' stack space is not reused, the aggressive stack reuse can lead to runtime errors. This option is used to control the temporary stack reuse optimization. - -ftrapv
- This option generates traps for signed overflow on addition, subtraction, multiplication operations. The options -ftrapv and -fwrapv override each other, so using -ftrapv -fwrapv on the command-line results in -fwrapv being effective. Note that only active options override, so using -ftrapv -fwrapv -fno-wrapv on the command-line results in -ftrapv being effective.
- -fwrapv
- This option instructs the compiler to assume that signed arithmetic overflow of addition, subtraction and multiplication wraps around using twos-complement representation. This flag enables some optimizations and disables others. The options -ftrapv and -fwrapv override each other, so using -ftrapv -fwrapv on the command-line results in -fwrapv being effective. Note that only active options override, so using -ftrapv -fwrapv -fno-wrapv on the command-line results in -ftrapv being effective.
- -fexceptions
-
Enable exception handling. Generates extra code needed to propagate
exceptions. For some targets, this implies GCCgenerates frame unwind information for all functions, which can produce significant data size overhead, although it does not affect execution. If you do not specify this option,GCCenables it by default for languages like C++that normally require exception handling, and disables it for languages like C that do not normally require it. However, you may need to enable this option when compiling C code that needs to interoperate properly with exception handlers written in C++. You may also wish to disable this option if you are compiling older C++programs that don't use exception handling.
- -fnon-call-exceptions
- Generate code that allows trapping instructions to throw exceptions. Note that this requires platform-specific runtime support that does not exist everywhere. Moreover, it only allows trapping instructions to throw exceptions, i.e. memory references or floating-point instructions. It does not allow exceptions to be thrown from arbitrary signal handlers such as "SIGALRM".
- -fdelete-dead-exceptions
- Consider that instructions that may throw exceptions but don't otherwise contribute to the execution of the program can be optimized away. This option is enabled by default for the Ada front end, as permitted by the Ada language specification. Optimization passes that cause dead exceptions to be removed are enabled independently at different optimization levels.
- -funwind-tables
- Similar to -fexceptions, except that it just generates any needed static data, but does not affect the generated code in any other way. You normally do not need to enable this option; instead, a language processor that needs this handling enables it on your behalf.
- -fasynchronous-unwind-tables
-
Generate unwind table in DWARFformat, if supported by target machine. The table is exact at each instruction boundary, so it can be used for stack unwinding from asynchronous events (such as debugger or garbage collector).
- -fno-gnu-unique
-
On systems with recent GNUassembler and C library, the C++compiler uses the "STB_GNU_UNIQUE" binding to make sure that definitions of template static data members and static local variables in inline functions are unique even in the presence of "RTLD_LOCAL"; this is necessary to avoid problems with a library used by two different "RTLD_LOCAL" plugins depending on a definition in one of them and therefore disagreeing with the other one about the binding of the symbol. But this causes "dlclose" to be ignored for affected DSOs; if your program relies on reinitialization of aDSOvia "dlclose" and "dlopen", you can use -fno-gnu-unique.
- -fpcc-struct-return
-
Return ``short'' "struct" and "union" values in memory like
longer ones, rather than in registers. This convention is less
efficient, but it has the advantage of allowing intercallability between
GCC-compiled files and files compiled with other compilers, particularly
the Portable C Compiler (pcc).
The precise convention for returning structures in memory depends on the target configuration macros.
Short structures and unions are those whose size and alignment match that of some integer type.
Warning: code compiled with the -fpcc-struct-return switch is not binary compatible with code compiled with the -freg-struct-return switch. Use it to conform to a non-default application binary interface.
- -freg-struct-return
-
Return "struct" and "union" values in registers when possible.
This is more efficient for small structures than
-fpcc-struct-return.
If you specify neither -fpcc-struct-return nor -freg-struct-return,
GCCdefaults to whichever convention is standard for the target. If there is no standard convention,GCCdefaults to -fpcc-struct-return, except on targets whereGCCis the principal compiler. In those cases, we can choose the standard, and we chose the more efficient register return alternative.Warning: code compiled with the -freg-struct-return switch is not binary compatible with code compiled with the -fpcc-struct-return switch. Use it to conform to a non-default application binary interface.
- -fshort-enums
-
Allocate to an "enum" type only as many bytes as it needs for the
declared range of possible values. Specifically, the "enum" type
is equivalent to the smallest integer type that has enough room.
Warning: the -fshort-enums switch causes
GCCto generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. - -fshort-wchar
-
Override the underlying type for "wchar_t" to be "short
unsigned int" instead of the default for the target. This option is
useful for building programs to run under WINE.
Warning: the -fshort-wchar switch causes
GCCto generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. - -fno-common
-
In C code, this option controls the placement of global variables
defined without an initializer, known as tentative definitions
in the C standard. Tentative definitions are distinct from declarations
of a variable with the "extern" keyword, which do not allocate storage.
Unix C compilers have traditionally allocated storage for uninitialized global variables in a common block. This allows the linker to resolve all tentative definitions of the same variable in different compilation units to the same object, or to a non-tentative definition. This is the behavior specified by -fcommon, and is the default for
GCCon most targets. On the other hand, this behavior is not required byISO C,and on some targets may carry a speed or code size penalty on variable references.The -fno-common option specifies that the compiler should instead place uninitialized global variables in the data section of the object file. This inhibits the merging of tentative definitions by the linker so you get a multiple-definition error if the same variable is defined in more than one compilation unit. Compiling with -fno-common is useful on targets for which it provides better performance, or if you wish to verify that the program will work on other systems that always treat uninitialized variable definitions this way.
- -fno-ident
- Ignore the "#ident" directive.
- -finhibit-size-directive
- Don't output a ".size" assembler directive, or anything else that would cause trouble if the function is split in the middle, and the two halves are placed at locations far apart in memory. This option is used when compiling crtstuff.c; you should not need to use it for anything else.
- -fverbose-asm
-
Put extra commentary information in the generated assembly code to
make it more readable. This option is generally only of use to those
who actually need to read the generated assembly code (perhaps while
debugging the compiler itself).
-fno-verbose-asm, the default, causes the extra information to be omitted and is useful when comparing two assembler files.
The added comments include:
-
- *
- information on the compiler version and command-line options,
- *
-
the source code lines associated with the assembly instructions,
in the form FILENAME:LINENUMBER:CONTENT OF LINE,
- *
- hints on which high-level expressions correspond to the various assembly instruction operands.
-
For example, given this C source file:
int test (int n) { int i; int total = 0; for (i = 0; i < n; i++) total += i * i; return total; }
compiling to (x86_64) assembly via -S and emitting the result direct to stdout via -o -
gcc -S test.c -fverbose-asm -Os -o -
gives output similar to this:
.file "test.c" # GNU C11 (GCC) version 7.0.0 20160809 (experimental) (x86_64-pc-linux-gnu) [...snip...] # options passed: [...snip...] .text .globl test .type test, @function test: .LFB0: .cfi_startproc # test.c:4: int total = 0; xorl %eax, %eax # <retval> # test.c:6: for (i = 0; i < n; i++) xorl %edx, %edx # i .L2: # test.c:6: for (i = 0; i < n; i++) cmpl %edi, %edx # n, i jge .L5 #, # test.c:7: total += i * i; movl %edx, %ecx # i, tmp92 imull %edx, %ecx # i, tmp92 # test.c:6: for (i = 0; i < n; i++) incl %edx # i # test.c:7: total += i * i; addl %ecx, %eax # tmp92, <retval> jmp .L2 # .L5: # test.c:10: } ret .cfi_endproc .LFE0: .size test, .-test .ident "GCC: (GNU) 7.0.0 20160809 (experimental)" .section .note.GNU-stack,"",@progbits
The comments are intended for humans rather than machines and hence the precise format of the comments is subject to change.
-
- -frecord-gcc-switches
-
This switch causes the command line used to invoke the
compiler to be recorded into the object file that is being created.
This switch is only implemented on some targets and the exact format
of the recording is target and binary file format dependent, but it
usually takes the form of a section containing ASCIItext. This switch is related to the -fverbose-asm switch, but that switch only records information in the assembler output file as comments, so it never reaches the object file. See also -grecord-gcc-switches for another way of storing compiler options into the object file.
- -fpic
-
Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses all constant addresses through a global offset table (GOT). The dynamic loader resolves theGOTentries when the program starts (the dynamic loader is not part ofGCC; it is part of the operating system). If theGOTsize for the linked executable exceeds a machine-specific maximum size, you get an error message from the linker indicating that -fpic does not work; in that case, recompile with -fPIC instead. (These maximums are 8k on theSPARC,28k on AArch64 and 32k on the m68k andRS/6000.The x86 has no such limit.)
Position-independent code requires special support, and therefore works only on certain machines. For the x86,
GCCsupportsPICfor System V but not for the Sun 386i. Code generated for theIBM RS/6000is always position-independent.When this flag is set, the macros "__pic__" and "__PIC__" are defined to 1.
- -fPIC
-
If supported for the target machine, emit position-independent code,
suitable for dynamic linking and avoiding any limit on the size of the
global offset table. This option makes a difference on AArch64, m68k,
PowerPC and SPARC.
Position-independent code requires special support, and therefore works only on certain machines.
When this flag is set, the macros "__pic__" and "__PIC__" are defined to 2.
- -fpie
- -fPIE
-
These options are similar to -fpic and -fPIC, but
generated position independent code can be only linked into executables.
Usually these options are used when -pie GCCoption is used during linking.
-fpie and -fPIE both define the macros "__pie__" and "__PIE__". The macros have the value 1 for -fpie and 2 for -fPIE.
- -fno-plt
-
Do not use the PLTfor external function calls in position-independent code. Instead, load the callee address at call sites from theGOTand branch to it. This leads to more efficient code by eliminatingPLTstubs and exposingGOTloads to optimizations. On architectures such as 32-bit x86 wherePLTstubs expect theGOTpointer in a specific register, this gives more register allocation freedom to the compiler. Lazy binding requires use of thePLT; with -fno-plt all external symbols are resolved at load time.
Alternatively, the function attribute "noplt" can be used to avoid calls through the
PLTfor specific external functions.In position-dependent code, a few targets also convert calls to functions that are marked to not use the
PLTto use theGOTinstead. - -fno-jump-tables
-
Do not use jump tables for switch statements even where it would be
more efficient than other code generation strategies. This option is
of use in conjunction with -fpic or -fPIC for
building code that forms part of a dynamic linker and cannot
reference the address of a jump table. On some targets, jump tables
do not require a GOTand this option is not needed.
- -ffixed-reg
-
Treat the register named reg as a fixed register; generated code
should never refer to it (except perhaps as a stack pointer, frame
pointer or in some other fixed role).
reg must be the name of a register. The register names accepted are machine-specific and are defined in the "REGISTER_NAMES" macro in the machine description macro file.
This flag does not have a negative form, because it specifies a three-way choice.
- -fcall-used-reg
-
Treat the register named reg as an allocable register that is
clobbered by function calls. It may be allocated for temporaries or
variables that do not live across a call. Functions compiled this way
do not save and restore the register reg.
It is an error to use this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed pervasive roles in the machine's execution model produces disastrous results.
This flag does not have a negative form, because it specifies a three-way choice.
- -fcall-saved-reg
-
Treat the register named reg as an allocable register saved by
functions. It may be allocated even for temporaries or variables that
live across a call. Functions compiled this way save and restore
the register reg if they use it.
It is an error to use this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed pervasive roles in the machine's execution model produces disastrous results.
A different sort of disaster results from the use of this flag for a register in which function values may be returned.
This flag does not have a negative form, because it specifies a three-way choice.
- -fpack-struct[=n]
-
Without a value specified, pack all structure members together without
holes. When a value is specified (which must be a small power of two), pack
structure members according to this value, representing the maximum
alignment (that is, objects with default alignment requirements larger than
this are output potentially unaligned at the next fitting location.
Warning: the -fpack-struct switch causes
GCCto generate code that is not binary compatible with code generated without that switch. Additionally, it makes the code suboptimal. Use it to conform to a non-default application binary interface. - -fleading-underscore
-
This option and its counterpart, -fno-leading-underscore, forcibly
change the way C symbols are represented in the object file. One use
is to help link with legacy assembly code.
Warning: the -fleading-underscore switch causes
GCCto generate code that is not binary compatible with code generated without that switch. Use it to conform to a non-default application binary interface. Not all targets provide complete support for this switch. - -ftls-model=model
-
Alter the thread-local storage model to be used.
The model argument should be one of global-dynamic,
local-dynamic, initial-exec or local-exec.
Note that the choice is subject to optimization: the compiler may use
a more efficient model for symbols not visible outside of the translation
unit, or if -fpic is not given on the command line.
The default without -fpic is initial-exec; with -fpic the default is global-dynamic.
- -ftrampolines
-
For targets that normally need trampolines for nested functions, always
generate them instead of using descriptors. Otherwise, for targets that
do not need them, like for example HP-PA or IA-64,do nothing.
A trampoline is a small piece of code that is created at run time on the stack when the address of a nested function is taken, and is used to call the nested function indirectly. Therefore, it requires the stack to be made executable in order for the program to work properly.
-fno-trampolines is enabled by default on a language by language basis to let the compiler avoid generating them, if it computes that this is safe, and replace them with descriptors. Descriptors are made up of data only, but the generated code must be prepared to deal with them. As of this writing, -fno-trampolines is enabled by default only for Ada.
Moreover, code compiled with -ftrampolines and code compiled with -fno-trampolines are not binary compatible if nested functions are present. This option must therefore be used on a program-wide basis and be manipulated with extreme care.
- -fvisibility=[default|internal|hidden|protected]
-
Set the default ELFimage symbol visibility to the specified option---all symbols are marked with this unless overridden within the code. Using this feature can very substantially improve linking and load times of shared object libraries, produce more optimized code, provide near-perfectAPIexport and prevent symbol clashes. It is strongly recommended that you use this in any shared objects you distribute.
Despite the nomenclature, default always means public; i.e., available to be linked against from outside the shared object. protected and internal are pretty useless in real-world usage so the only other commonly used option is hidden. The default if -fvisibility isn't specified is default, i.e., make every symbol public.
A good explanation of the benefits offered by ensuring
ELFsymbols have the correct visibility is given by ``How To Write Shared Libraries'' by Ulrich Drepper (which can be found at <www.akkadia.org/drepper>)---however a superior solution made possible by this option to marking things hidden when the default is public is to make the default hidden and mark things public. This is the norm with DLLs on Windows and with -fvisibility=hidden and "__attribute__ ((visibility("default")))" instead of "__declspec(dllexport)" you get almost identical semantics with identical syntax. This is a great boon to those working with cross-platform projects.For those adding visibility support to existing code, you may find "#pragma GCC visibility" of use. This works by you enclosing the declarations you wish to set visibility for with (for example) "#pragma GCC visibility push(hidden)" and "#pragma GCC visibility pop". Bear in mind that symbol visibility should be viewed as part of the
APIinterface contract and thus all new code should always specify visibility when it is not the default; i.e., declarations only for use within the localDSOshould always be marked explicitly as hidden as so to avoidPLTindirection overheads---making this abundantly clear also aids readability and self-documentation of the code. Note that due toISO Cspecification requirements, "operator new" and "operator delete" must always be of default visibility.++Be aware that headers from outside your project, in particular system headers and headers from any other library you use, may not be expecting to be compiled with visibility other than the default. You may need to explicitly say "#pragma GCC visibility push(default)" before including any such headers.
"extern" declarations are not affected by -fvisibility, so a lot of code can be recompiled with -fvisibility=hidden with no modifications. However, this means that calls to "extern" functions with no explicit visibility use the
PLT,so it is more effective to use "__attribute ((visibility))" and/or "#pragma GCC visibility" to tell the compiler which "extern" declarations should be treated as hidden.Note that -fvisibility does affect C
++vague linkage entities. This means that, for instance, an exception class that is be thrown between DSOs must be explicitly marked with default visibility so that the type_info nodes are unified between the DSOs.An overview of these techniques, their benefits and how to use them is at <gcc.gnu.org/wiki/Visibility>.
- -fstrict-volatile-bitfields
-
This option should be used if accesses to volatile bit-fields (or other
structure fields, although the compiler usually honors those types
anyway) should use a single access of the width of the
field's type, aligned to a natural alignment if possible. For
example, targets with memory-mapped peripheral registers might require
all such accesses to be 16 bits wide; with this flag you can
declare all peripheral bit-fields as "unsigned short" (assuming short
is 16 bits on these targets) to force GCCto use 16-bit accesses instead of, perhaps, a more efficient 32-bit access.
If this option is disabled, the compiler uses the most efficient instruction. In the previous example, that might be a 32-bit load instruction, even though that accesses bytes that do not contain any portion of the bit-field, or memory-mapped registers unrelated to the one being updated.
In some cases, such as when the "packed" attribute is applied to a structure field, it may not be possible to access the field with a single read or write that is correctly aligned for the target machine. In this case
GCCfalls back to generating multiple accesses rather than code that will fault or truncate the result at run time.Note: Due to restrictions of the C/C
++11 memory model, write accesses are not allowed to touch non bit-field members. It is therefore recommended to define all bits of the field's type as bit-field members.The default value of this option is determined by the application binary interface for the target processor.
- -fsync-libcalls
-
This option controls whether any out-of-line instance of the "__sync"
family of functions may be used to implement the C++11 "__atomic" family of functions.
The default value of this option is enabled, thus the only useful form of the option is -fno-sync-libcalls. This option is used in the implementation of the libatomic runtime library.
GCC Developer Options
This section describes command-line options that are primarily of
interest to - -dletters
- -fdump-rtl-pass
- -fdump-rtl-pass=filename
-
Says to make debugging dumps during compilation at times specified by
letters. This is used for debugging the RTL-based passes of the
compiler. The file names for most of the dumps are made by appending
a pass number and a word to the dumpname, and the files are
created in the directory of the output file. In case of
=filename option, the dump is output on the given file
instead of the pass numbered dump files. Note that the pass number is
assigned as passes are registered into the pass manager. Most passes
are registered in the order that they will execute and for these passes
the number corresponds to the pass execution order. However, passes
registered by plugins, passes specific to compilation targets, or
passes that are otherwise registered after all the other passes are
numbered higher than a pass named ``final'', even if they are executed
earlier. dumpname is generated from the name of the output
file if explicitly specified and not an executable, otherwise it is
the basename of the source file.
Some -dletters switches have different meaning when -E is used for preprocessing.
Debug dumps can be enabled with a -fdump-rtl switch or some -d option letters. Here are the possible letters for use in pass and letters, and their meanings:
-
- -fdump-rtl-alignments
- Dump after branch alignments have been computed.
- -fdump-rtl-asmcons
- Dump after fixing rtl statements that have unsatisfied in/out constraints.
- -fdump-rtl-auto_inc_dec
- Dump after auto-inc-dec discovery. This pass is only run on architectures that have auto inc or auto dec instructions.
- -fdump-rtl-barriers
- Dump after cleaning up the barrier instructions.
- -fdump-rtl-bbpart
- Dump after partitioning hot and cold basic blocks.
- -fdump-rtl-bbro
- Dump after block reordering.
- -fdump-rtl-btl1
- -fdump-rtl-btl2
- -fdump-rtl-btl1 and -fdump-rtl-btl2 enable dumping after the two branch target load optimization passes.
- -fdump-rtl-bypass
- Dump after jump bypassing and control flow optimizations.
- -fdump-rtl-combine
-
Dump after the RTLinstruction combination pass.
- -fdump-rtl-compgotos
- Dump after duplicating the computed gotos.
- -fdump-rtl-ce1
- -fdump-rtl-ce2
- -fdump-rtl-ce3
- -fdump-rtl-ce1, -fdump-rtl-ce2, and -fdump-rtl-ce3 enable dumping after the three if conversion passes.
- -fdump-rtl-cprop_hardreg
- Dump after hard register copy propagation.
- -fdump-rtl-csa
- Dump after combining stack adjustments.
- -fdump-rtl-cse1
- -fdump-rtl-cse2
- -fdump-rtl-cse1 and -fdump-rtl-cse2 enable dumping after the two common subexpression elimination passes.
- -fdump-rtl-dce
- Dump after the standalone dead code elimination passes.
- -fdump-rtl-dbr
- Dump after delayed branch scheduling.
- -fdump-rtl-dce1
- -fdump-rtl-dce2
- -fdump-rtl-dce1 and -fdump-rtl-dce2 enable dumping after the two dead store elimination passes.
- -fdump-rtl-eh
-
Dump after finalization of EHhandling code.
- -fdump-rtl-eh_ranges
-
Dump after conversion of EHhandling range regions.
- -fdump-rtl-expand
-
Dump after RTLgeneration.
- -fdump-rtl-fwprop1
- -fdump-rtl-fwprop2
- -fdump-rtl-fwprop1 and -fdump-rtl-fwprop2 enable dumping after the two forward propagation passes.
- -fdump-rtl-gcse1
- -fdump-rtl-gcse2
- -fdump-rtl-gcse1 and -fdump-rtl-gcse2 enable dumping after global common subexpression elimination.
- -fdump-rtl-init-regs
- Dump after the initialization of the registers.
- -fdump-rtl-initvals
- Dump after the computation of the initial value sets.
- -fdump-rtl-into_cfglayout
- Dump after converting to cfglayout mode.
- -fdump-rtl-ira
- Dump after iterated register allocation.
- -fdump-rtl-jump
- Dump after the second jump optimization.
- -fdump-rtl-loop2
- -fdump-rtl-loop2 enables dumping after the rtl loop optimization passes.
- -fdump-rtl-mach
- Dump after performing the machine dependent reorganization pass, if that pass exists.
- -fdump-rtl-mode_sw
- Dump after removing redundant mode switches.
- -fdump-rtl-rnreg
- Dump after register renumbering.
- -fdump-rtl-outof_cfglayout
- Dump after converting from cfglayout mode.
- -fdump-rtl-peephole2
- Dump after the peephole pass.
- -fdump-rtl-postreload
- Dump after post-reload optimizations.
- -fdump-rtl-pro_and_epilogue
- Dump after generating the function prologues and epilogues.
- -fdump-rtl-sched1
- -fdump-rtl-sched2
- -fdump-rtl-sched1 and -fdump-rtl-sched2 enable dumping after the basic block scheduling passes.
- -fdump-rtl-ree
- Dump after sign/zero extension elimination.
- -fdump-rtl-seqabstr
- Dump after common sequence discovery.
- -fdump-rtl-shorten
- Dump after shortening branches.
- -fdump-rtl-sibling
- Dump after sibling call optimizations.
- -fdump-rtl-split1
- -fdump-rtl-split2
- -fdump-rtl-split3
- -fdump-rtl-split4
- -fdump-rtl-split5
- These options enable dumping after five rounds of instruction splitting.
- -fdump-rtl-sms
- Dump after modulo scheduling. This pass is only run on some architectures.
- -fdump-rtl-stack
-
Dump after conversion from GCC's ``flat register file'' registers to the x87's stack-like registers. This pass is only run on x86 variants.
- -fdump-rtl-subreg1
- -fdump-rtl-subreg2
- -fdump-rtl-subreg1 and -fdump-rtl-subreg2 enable dumping after the two subreg expansion passes.
- -fdump-rtl-unshare
- Dump after all rtl has been unshared.
- -fdump-rtl-vartrack
- Dump after variable tracking.
- -fdump-rtl-vregs
- Dump after converting virtual registers to hard registers.
- -fdump-rtl-web
- Dump after live range splitting.
- -fdump-rtl-regclass
- -fdump-rtl-subregs_of_mode_init
- -fdump-rtl-subregs_of_mode_finish
- -fdump-rtl-dfinit
- -fdump-rtl-dfinish
- These dumps are defined but always produce empty files.
- -da
- -fdump-rtl-all
- Produce all the dumps listed above.
- -dA
- Annotate the assembler output with miscellaneous debugging information.
- -dD
- Dump all macro definitions, at the end of preprocessing, in addition to normal output.
- -dH
- Produce a core dump whenever an error occurs.
- -dp
- Annotate the assembler output with a comment indicating which pattern and alternative is used. The length of each instruction is also printed.
- -dP
-
Dump the RTLin the assembler output as a comment before each instruction. Also turns on -dp annotation.
- -dx
-
Just generate RTLfor a function instead of compiling it. Usually used with -fdump-rtl-expand.
-
- -fdump-noaddr
- When doing debugging dumps, suppress address output. This makes it more feasible to use diff on debugging dumps for compiler invocations with different compiler binaries and/or different text / bss / data / heap / stack / dso start locations.
- -freport-bug
-
Collect and dump debug information into a temporary file if an
internal compiler error (ICE) occurs.
- -fdump-unnumbered
- When doing debugging dumps, suppress instruction numbers and address output. This makes it more feasible to use diff on debugging dumps for compiler invocations with different options, in particular with and without -g.
- -fdump-unnumbered-links
- When doing debugging dumps (see -d option above), suppress instruction numbers for the links to the previous and next instructions in a sequence.
- -fdump-translation-unit (C++only)
- -fdump-translation-unit-options (C++only)
- Dump a representation of the tree structure for the entire translation unit to a file. The file name is made by appending .tu to the source file name, and the file is created in the same directory as the output file. If the -options form is used, options controls the details of the dump as described for the -fdump-tree options.
- -fdump-class-hierarchy (C++only)
- -fdump-class-hierarchy-options (C++only)
- Dump a representation of each class's hierarchy and virtual function table layout to a file. The file name is made by appending .class to the source file name, and the file is created in the same directory as the output file. If the -options form is used, options controls the details of the dump as described for the -fdump-tree options.
- -fdump-ipa-switch
-
Control the dumping at various stages of inter-procedural analysis
language tree to a file. The file name is generated by appending a
switch specific suffix to the source file name, and the file is created
in the same directory as the output file. The following dumps are
possible:
-
- all
- Enables all inter-procedural analysis dumps.
- cgraph
- Dumps information about call-graph optimization, unused function removal, and inlining decisions.
- inline
- Dump after function inlining.
-
- -fdump-passes
- Print on stderr the list of optimization passes that are turned on and off by the current command-line options.
- -fdump-statistics-option
- Enable and control dumping of pass statistics in a separate file. The file name is generated by appending a suffix ending in .statistics to the source file name, and the file is created in the same directory as the output file. If the -option form is used, -stats causes counters to be summed over the whole compilation unit while -details dumps every event as the passes generate them. The default with no option is to sum counters for each function compiled.
- -fdump-tree-all
- -fdump-tree-switch
- -fdump-tree-switch-options
- -fdump-tree-switch-options=filename
-
Control the dumping at various stages of processing the intermediate
language tree to a file. The file name is generated by appending a
switch-specific suffix to the source file name, and the file is
created in the same directory as the output file. In case of
=filename option, the dump is output on the given file
instead of the auto named dump files. If the -options
form is used, options is a list of - separated options
which control the details of the dump. Not all options are applicable
to all dumps; those that are not meaningful are ignored. The
following options are available
-
- address
- Print the address of each node. Usually this is not meaningful as it changes according to the environment and source file. Its primary use is for tying up a dump file with a debug environment.
- asmname
- If "DECL_ASSEMBLER_NAME" has been set for a given decl, use that in the dump instead of "DECL_NAME". Its primary use is ease of use working backward from mangled names in the assembly file.
- slim
-
When dumping front-end intermediate representations, inhibit dumping
of members of a scope or body of a function merely because that scope
has been reached. Only dump such items when they are directly reachable
by some other path.
When dumping pretty-printed trees, this option inhibits dumping the bodies of control structures.
When dumping
RTL,print theRTLin slim (condensed) form instead of the default LISP-like representation. - raw
- Print a raw representation of the tree. By default, trees are pretty-printed into a C-like representation.
- details
- Enable more detailed dumps (not honored by every dump option). Also include information from the optimization passes.
- stats
- Enable dumping various statistics about the pass (not honored by every dump option).
- blocks
- Enable showing basic block boundaries (disabled in raw dumps).
- graph
-
For each of the other indicated dump files (-fdump-rtl-pass),
dump a representation of the control flow graph suitable for viewing with
GraphViz to file.passid.pass.dot. Each function in
the file is pretty-printed as a subgraph, so that GraphViz can render them
all in a single plot.
This option currently only works for
RTLdumps, and theRTLis always dumped in slim form. - vops
- Enable showing virtual operands for every statement.
- lineno
- Enable showing line numbers for statements.
- uid
-
Enable showing the unique ID("DECL_UID") for each variable.
- verbose
- Enable showing the tree dump for each statement.
- eh
-
Enable showing the EHregion number holding each statement.
- scev
- Enable showing scalar evolution analysis details.
- optimized
- Enable showing optimization information (only available in certain passes).
- missed
- Enable showing missed optimization information (only available in certain passes).
- note
- Enable other detailed optimization information (only available in certain passes).
- =filename
-
Instead of an auto named dump file, output into the given file
name. The file names stdout and stderr are treated
specially and are considered already open standard streams. For
example,
gcc -O2 -ftree-vectorize -fdump-tree-vect-blocks=foo.dump -fdump-tree-pre=/dev/stderr file.c
outputs vectorizer dump into foo.dump, while the
PREdump is output on to stderr. If two conflicting dump filenames are given for the same pass, then the latter option overrides the earlier one. - all
- Turn on all options, except raw, slim, verbose and lineno.
- optall
- Turn on all optimization options, i.e., optimized, missed, and note.
-
To determine what tree dumps are available or find the dump for a pass of interest follow the steps below.
- 1.
-
Invoke GCCwith -fdump-passes and in the stderr output look for a code that corresponds to the pass you are interested in. For example, the codes "tree-evrp", "tree-vrp1", and "tree-vrp2" correspond to the three Value Range Propagation passes. The number at the end distinguishes distinct invocations of the same pass.
- 2.
-
To enable the creation of the dump file, append the pass code to
the -fdump- option prefix and invoke GCCwith it. For example, to enable the dump from the Early Value Range Propagation pass, invokeGCCwith the -fdump-tree-evrp option. Optionally, you may specify the name of the dump file. If you don't specify one,GCCcreates as described below.
- 3.
-
Find the pass dump in a file whose name is composed of three components
separated by a period: the name of the source file GCCwas invoked to compile, a numeric suffix indicating the pass number followed by the letter t for tree passes (and the letter r forRTLpasses), and finally the pass code. For example, the EarlyVRPpass dump might be in a file named myfile.c.038t.evrp in the current working directory. Note that the numeric codes are not stable and may change from one version ofGCCto another.
-
- -fopt-info
- -fopt-info-options
- -fopt-info-options=filename
-
Controls optimization dumps from various optimization passes. If the
-options form is used, options is a list of
- separated option keywords to select the dump details and
optimizations.
The options can be divided into two groups: options describing the verbosity of the dump, and options describing which optimizations should be included. The options from both the groups can be freely mixed as they are non-overlapping. However, in case of any conflicts, the later options override the earlier options on the command line.
The following options control the dump verbosity:
-
- optimized
- Print information when an optimization is successfully applied. It is up to a pass to decide which information is relevant. For example, the vectorizer passes print the source location of loops which are successfully vectorized.
- missed
- Print information about missed optimizations. Individual passes control which information to include in the output.
- note
- Print verbose information about optimizations, such as certain transformations, more detailed messages about decisions etc.
- all
- Print detailed optimization information. This includes optimized, missed, and note.
-
One or more of the following option keywords can be used to describe a group of optimizations:
- ipa
- Enable dumps from all interprocedural optimizations.
- loop
- Enable dumps from all loop optimizations.
- inline
- Enable dumps from all inlining optimizations.
- omp
-
Enable dumps from all OMP(Offloading and Multi Processing) optimizations.
- vec
- Enable dumps from all vectorization optimizations.
- optall
- Enable dumps from all optimizations. This is a superset of the optimization groups listed above.
-
If options is omitted, it defaults to optimized-optall, which means to dump all info about successful optimizations from all the passes.
If the filename is provided, then the dumps from all the applicable optimizations are concatenated into the filename. Otherwise the dump is output onto stderr. Though multiple -fopt-info options are accepted, only one of them can include a filename. If other filenames are provided then all but the first such option are ignored.
Note that the output filename is overwritten in case of multiple translation units. If a combined output from multiple translation units is desired, stderr should be used instead.
In the following example, the optimization info is output to stderr:
gcc -O3 -fopt-info
This example:
gcc -O3 -fopt-info-missed=missed.all
outputs missed optimization report from all the passes into missed.all, and this one:
gcc -O2 -ftree-vectorize -fopt-info-vec-missed
prints information about missed optimization opportunities from vectorization passes on stderr. Note that -fopt-info-vec-missed is equivalent to -fopt-info-missed-vec.
As another example,
gcc -O3 -fopt-info-inline-optimized-missed=inline.txt
outputs information about missed optimizations as well as optimized locations from all the inlining passes into inline.txt.
Finally, consider:
gcc -fopt-info-vec-missed=vec.miss -fopt-info-loop-optimized=loop.opt
Here the two output filenames vec.miss and loop.opt are in conflict since only one output file is allowed. In this case, only the first option takes effect and the subsequent options are ignored. Thus only vec.miss is produced which contains dumps from the vectorizer about missed opportunities.
-
- -fsched-verbose=n
-
On targets that use instruction scheduling, this option controls the
amount of debugging output the scheduler prints to the dump files.
For n greater than zero, -fsched-verbose outputs the same information as -fdump-rtl-sched1 and -fdump-rtl-sched2. For n greater than one, it also output basic block probabilities, detailed ready list information and unit/insn info. For n greater than two, it includes
RTLat abort point, control-flow and regions info. And for n over four, -fsched-verbose also includes dependence info. - -fenable-kind-pass
- -fdisable-kind-pass=range-list
-
This is a set of options that are used to explicitly disable/enable
optimization passes. These options are intended for use for debugging GCC.Compiler users should use regular options for enabling/disabling passes instead.
-
- -fdisable-ipa-pass
-
Disable IPApass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass name should be appended with a sequential number starting from 1.
- -fdisable-rtl-pass
- -fdisable-rtl-pass=range-list
-
Disable RTLpass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass name should be appended with a sequential number starting from 1. range-list is a comma-separated list of function ranges or assembler names. Each range is a number pair separated by a colon. The range is inclusive in both ends. If the range is trivial, the number pair can be simplified as a single number. If the function's call graph node's uid falls within one of the specified ranges, the pass is disabled for that function. The uid is shown in the function header of a dump file, and the pass names can be dumped by using option -fdump-passes.
- -fdisable-tree-pass
- -fdisable-tree-pass=range-list
- Disable tree pass pass. See -fdisable-rtl for the description of option arguments.
- -fenable-ipa-pass
-
Enable IPApass pass. pass is the pass name. If the same pass is statically invoked in the compiler multiple times, the pass name should be appended with a sequential number starting from 1.
- -fenable-rtl-pass
- -fenable-rtl-pass=range-list
-
Enable RTLpass pass. See -fdisable-rtl for option argument description and examples.
- -fenable-tree-pass
- -fenable-tree-pass=range-list
- Enable tree pass pass. See -fdisable-rtl for the description of option arguments.
-
Here are some examples showing uses of these options.
# disable ccp1 for all functions -fdisable-tree-ccp1 # disable complete unroll for function whose cgraph node uid is 1 -fenable-tree-cunroll=1 # disable gcse2 for functions at the following ranges [1,1], # [300,400], and [400,1000] # disable gcse2 for functions foo and foo2 -fdisable-rtl-gcse2=foo,foo2 # disable early inlining -fdisable-tree-einline # disable ipa inlining -fdisable-ipa-inline # enable tree full unroll -fenable-tree-unroll
-
- -fchecking
- -fchecking=n
- Enable internal consistency checking. The default depends on the compiler configuration. -fchecking=2 enables further internal consistency checking that might affect code generation.
- -frandom-seed=string
-
This option provides a seed that GCCuses in place of random numbers in generating certain symbol names that have to be different in every compiled file. It is also used to place unique stamps in coverage data files and the object files that produce them. You can use the -frandom-seed option to produce reproducibly identical object files.
The string can either be a number (decimal, octal or hex) or an arbitrary string (in which case it's converted to a number by computing
CRC32).The string should be different for every file you compile.
- -save-temps
- -save-temps=cwd
-
Store the usual ``temporary'' intermediate files permanently; place them
in the current directory and name them based on the source file. Thus,
compiling foo.c with -c -save-temps produces files
foo.i and foo.s, as well as foo.o. This creates a
preprocessed foo.i output file even though the compiler now
normally uses an integrated preprocessor.
When used in combination with the -x command-line option, -save-temps is sensible enough to avoid over writing an input source file with the same extension as an intermediate file. The corresponding intermediate file may be obtained by renaming the source file before using -save-temps.
If you invoke
GCCin parallel, compiling several different source files that share a common base name in different subdirectories or the same source file compiled for multiple output destinations, it is likely that the different parallel compilers will interfere with each other, and overwrite the temporary files. For instance:gcc -save-temps -o outdir1/foo.o indir1/foo.c& gcc -save-temps -o outdir2/foo.o indir2/foo.c&
may result in foo.i and foo.o being written to simultaneously by both compilers.
- -save-temps=obj
-
Store the usual ``temporary'' intermediate files permanently. If the
-o option is used, the temporary files are based on the
object file. If the -o option is not used, the
-save-temps=obj switch behaves like -save-temps.
For example:
gcc -save-temps=obj -c foo.c gcc -save-temps=obj -c bar.c -o dir/xbar.o gcc -save-temps=obj foobar.c -o dir2/yfoobar
creates foo.i, foo.s, dir/xbar.i, dir/xbar.s, dir2/yfoobar.i, dir2/yfoobar.s, and dir2/yfoobar.o.
- -time[=file]
-
Report the CPUtime taken by each subprocess in the compilation sequence. For C source files, this is the compiler proper and assembler (plus the linker if linking is done).
Without the specification of an output file, the output looks like this:
# cc1 0.12 0.01 # as 0.00 0.01
The first number on each line is the ``user time'', that is time spent executing the program itself. The second number is ``system time'', time spent executing operating system routines on behalf of the program. Both numbers are in seconds.
With the specification of an output file, the output is appended to the named file, and it looks like this:
0.12 0.01 cc1 <options> 0.00 0.01 as <options>
The ``user time'' and the ``system time'' are moved before the program name, and the options passed to the program are displayed, so that one can later tell what file was being compiled, and with which options.
- -fdump-final-insns[=file]
-
Dump the final internal representation (RTL) to file. If the optional argument is omitted (or if file is "."), the name of the dump file is determined by appending ".gkd" to the compilation output file name.
- -fcompare-debug[=opts]
-
If no error occurs during compilation, run the compiler a second time,
adding opts and -fcompare-debug-second to the arguments
passed to the second compilation. Dump the final internal
representation in both compilations, and print an error if they differ.
If the equal sign is omitted, the default -gtoggle is used.
The environment variable
GCC_COMPARE_DEBUG, if defined, non-empty and nonzero, implicitly enables -fcompare-debug. IfGCC_COMPARE_DEBUGis defined to a string starting with a dash, then it is used for opts, otherwise the default -gtoggle is used.-fcompare-debug=, with the equal sign but without opts, is equivalent to -fno-compare-debug, which disables the dumping of the final representation and the second compilation, preventing even
GCC_COMPARE_DEBUGfrom taking effect.To verify full coverage during -fcompare-debug testing, set
GCC_COMPARE_DEBUGto say -fcompare-debug-not-overridden, whichGCCrejects as an invalid option in any actual compilation (rather than preprocessing, assembly or linking). To get just a warning, settingGCC_COMPARE_DEBUGto -w%n-fcompare-debug not overridden will do. - -fcompare-debug-second
-
This option is implicitly passed to the compiler for the second
compilation requested by -fcompare-debug, along with options to
silence warnings, and omitting other options that would cause
side-effect compiler outputs to files or to the standard output. Dump
files and preserved temporary files are renamed so as to contain the
".gk" additional extension during the second compilation, to avoid
overwriting those generated by the first.
When this option is passed to the compiler driver, it causes the first compilation to be skipped, which makes it useful for little other than debugging the compiler proper.
- -gtoggle
- Turn off generation of debug info, if leaving out this option generates it, or turn it on at level 2 otherwise. The position of this argument in the command line does not matter; it takes effect after all other options are processed, and it does so only once, no matter how many times it is given. This is mainly intended to be used with -fcompare-debug.
- -fvar-tracking-assignments-toggle
- Toggle -fvar-tracking-assignments, in the same way that -gtoggle toggles -g.
- -Q
- Makes the compiler print out each function name as it is compiled, and print some statistics about each pass when it finishes.
- -ftime-report
- Makes the compiler print some statistics about the time consumed by each pass when it finishes.
- -ftime-report-details
- Record the time consumed by infrastructure parts separately for each pass.
- -fira-verbose=n
- Control the verbosity of the dump file for the integrated register allocator. The default value is 5. If the value n is greater or equal to 10, the dump output is sent to stderr using the same format as n minus 10.
- -flto-report
-
Prints a report with internal details on the workings of the link-time
optimizer. The contents of this report vary from version to version.
It is meant to be useful to GCCdevelopers when processing object files inLTOmode (via -flto).
Disabled by default.
- -flto-report-wpa
-
Like -flto-report, but only print for the WPAphase of Link Time Optimization.
- -fmem-report
- Makes the compiler print some statistics about permanent memory allocation when it finishes.
- -fmem-report-wpa
-
Makes the compiler print some statistics about permanent memory
allocation for the WPAphase only.
- -fpre-ipa-mem-report
- -fpost-ipa-mem-report
- Makes the compiler print some statistics about permanent memory allocation before or after interprocedural optimization.
- -fprofile-report
- Makes the compiler print some statistics about consistency of the (estimated) profile and effect of individual passes.
- -fstack-usage
-
Makes the compiler output stack usage information for the program, on a
per-function basis. The filename for the dump is made by appending
.su to the auxname. auxname is generated from the name of
the output file, if explicitly specified and it is not an executable,
otherwise it is the basename of the source file. An entry is made up
of three fields:
-
- *
- The name of the function.
- *
- A number of bytes.
- *
- One or more qualifiers: "static", "dynamic", "bounded".
-
The qualifier "static" means that the function manipulates the stack statically: a fixed number of bytes are allocated for the frame on function entry and released on function exit; no stack adjustments are otherwise made in the function. The second field is this fixed number of bytes.
The qualifier "dynamic" means that the function manipulates the stack dynamically: in addition to the static allocation described above, stack adjustments are made in the body of the function, for example to push/pop arguments around function calls. If the qualifier "bounded" is also present, the amount of these adjustments is bounded at compile time and the second field is an upper bound of the total amount of stack used by the function. If it is not present, the amount of these adjustments is not bounded at compile time and the second field only represents the bounded part.
-
- -fstats
-
Emit statistics about front-end processing at the end of the compilation.
This option is supported only by the C++front end, and the information is generally only useful to the G++ development team.
- -fdbg-cnt-list
- Print the name and the counter upper bound for all debug counters.
- -fdbg-cnt=counter-value-list
- Set the internal debug counter upper bound. counter-value-list is a comma-separated list of name:value pairs which sets the upper bound of each debug counter name to value. All debug counters have the initial upper bound of "UINT_MAX"; thus "dbg_cnt" returns true always unless the upper bound is set by this option. For example, with -fdbg-cnt=dce:10,tail_call:0, "dbg_cnt(dce)" returns true only for first 10 invocations.
- -print-file-name=library
-
Print the full absolute name of the library file library that
would be used when linking---and don't do anything else. With this
option, GCCdoes not compile or link anything; it just prints the file name.
- -print-multi-directory
-
Print the directory name corresponding to the multilib selected by any
other switches present in the command line. This directory is supposed
to exist in GCC_EXEC_PREFIX.
- -print-multi-lib
- Print the mapping from multilib directory names to compiler switches that enable them. The directory name is separated from the switches by ;, and each switch starts with an @ instead of the -, without spaces between multiple switches. This is supposed to ease shell processing.
- -print-multi-os-directory
-
Print the path to OSlibraries for the selected multilib, relative to some lib subdirectory. IfOSlibraries are present in the lib subdirectory and no multilibs are used, this is usually just ., ifOSlibraries are present in libsuffix sibling directories this prints e.g. ../lib64, ../lib or ../lib32, or ifOSlibraries are present in lib/subdir subdirectories it prints e.g. amd64, sparcv9 or ev6.
- -print-multiarch
-
Print the path to OSlibraries for the selected multiarch, relative to some lib subdirectory.
- -print-prog-name=program
- Like -print-file-name, but searches for a program such as cpp.
- -print-libgcc-file-name
-
Same as -print-file-name=libgcc.a.
This is useful when you use -nostdlib or -nodefaultlibs but you do want to link with libgcc.a. You can do:
gcc -nostdlib <files>... `gcc -print-libgcc-file-name`
- -print-search-dirs
-
Print the name of the configured installation directory and a list of
program and library directories gcc searches---and don't do anything else.
This is useful when gcc prints the error message installation problem, cannot exec cpp0: No such file or directory. To resolve this you either need to put cpp0 and the other compiler components where gcc expects to find them, or you can set the environment variable
GCC_EXEC_PREFIXto the directory where you installed them. Don't forget the trailing /. - -print-sysroot
- Print the target sysroot directory that is used during compilation. This is the target sysroot specified either at configure time or using the --sysroot option, possibly with an extra suffix that depends on compilation options. If no target sysroot is specified, the option prints nothing.
- -print-sysroot-headers-suffix
- Print the suffix added to the target sysroot when searching for headers, or give an error if the compiler is not configured with such a suffix---and don't do anything else.
- -dumpmachine
- Print the compiler's target machine (for example, i686-pc-linux-gnu)---and don't do anything else.
- -dumpversion
- Print the compiler version (for example, 3.0, 6.3.0 or 7)---and don't do anything else. This is the compiler version used in filesystem paths, specs, can be depending on how the compiler has been configured just a single number (major version), two numbers separated by dot (major and minor version) or three numbers separated by dots (major, minor and patchlevel version).
- -dumpfullversion
- Print the full compiler version, always 3 numbers separated by dots, major, minor and patchlevel version.
- -dumpspecs
-
Print the compiler's built-in specs---and don't do anything else. (This
is used when GCCitself is being built.)
Machine-Dependent Options
Each target machine supported bySome configurations of the compiler also support additional target-specific options, usually for compatibility with other compilers on the same platform.
AArch64 Options
These options are defined for AArch64 implementations:
- -mabi=name
-
Generate code for the specified data model. Permissible values
are ilp32 for SysV-like data model where int, long int and pointers
are 32 bits, and lp64 for SysV-like data model where int is 32 bits,
but long int and pointers are 64 bits.
The default depends on the specific target configuration. Note that the
LP64andILP32ABIs are not link-compatible; you must compile your entire program with the sameABI,and link with a compatible set of libraries. - -mbig-endian
-
Generate big-endian code. This is the default when GCCis configured for an aarch64_be-*-* target.
- -mgeneral-regs-only
-
Generate code which uses only the general-purpose registers. This will prevent
the compiler from using floating-point and Advanced SIMDregisters but will not impose any restrictions on the assembler.
- -mlittle-endian
-
Generate little-endian code. This is the default when GCCis configured for an aarch64-*-* but not an aarch64_be-*-* target.
- -mcmodel=tiny
- Generate code for the tiny code model. The program and its statically defined symbols must be within 1MB of each other. Programs can be statically or dynamically linked.
- -mcmodel=small
- Generate code for the small code model. The program and its statically defined symbols must be within 4GB of each other. Programs can be statically or dynamically linked. This is the default code model.
- -mcmodel=large
- Generate code for the large code model. This makes no assumptions about addresses and sizes of sections. Programs can be statically linked only.
- -mstrict-align
- Avoid generating memory accesses that may not be aligned on a natural object boundary as described in the architecture specification.
- -momit-leaf-frame-pointer
- -mno-omit-leaf-frame-pointer
- Omit or keep the frame pointer in leaf functions. The former behavior is the default.
- -mtls-dialect=desc
-
Use TLSdescriptors as the thread-local storage mechanism for dynamic accesses ofTLSvariables. This is the default.
- -mtls-dialect=traditional
-
Use traditional TLSas the thread-local storage mechanism for dynamic accesses ofTLSvariables.
- -mtls-size=size
-
Specify bit size of immediate TLSoffsets. Valid values are 12, 24, 32, 48. This option requires binutils 2.26 or newer.
- -mfix-cortex-a53-835769
- -mno-fix-cortex-a53-835769
-
Enable or disable the workaround for the ARMCortex-A53 erratum number 835769. This involves inserting aNOPinstruction between memory instructions and 64-bit integer multiply-accumulate instructions.
- -mfix-cortex-a53-843419
- -mno-fix-cortex-a53-843419
-
Enable or disable the workaround for the ARMCortex-A53 erratum number 843419. This erratum workaround is made at link time and this will only pass the corresponding flag to the linker.
- -mlow-precision-recip-sqrt
- -mno-low-precision-recip-sqrt
- Enable or disable the reciprocal square root approximation. This option only has an effect if -ffast-math or -funsafe-math-optimizations is used as well. Enabling this reduces precision of reciprocal square root results to about 16 bits for single precision and to 32 bits for double precision.
- -mlow-precision-sqrt
- -mno-low-precision-sqrt
- Enable or disable the square root approximation. This option only has an effect if -ffast-math or -funsafe-math-optimizations is used as well. Enabling this reduces precision of square root results to about 16 bits for single precision and to 32 bits for double precision. If enabled, it implies -mlow-precision-recip-sqrt.
- -mlow-precision-div
- -mno-low-precision-div
- Enable or disable the division approximation. This option only has an effect if -ffast-math or -funsafe-math-optimizations is used as well. Enabling this reduces precision of division results to about 16 bits for single precision and to 32 bits for double precision.
- -march=name
-
Specify the name of the target architecture and, optionally, one or
more feature modifiers. This option has the form
-march=arch{+[no]feature}*.
The permissible values for arch are armv8-a, armv8.1-a, armv8.2-a, armv8.3-a or native.
The value armv8.3-a implies armv8.2-a and enables compiler support for the ARMv8.3-A architecture extensions.
The value armv8.2-a implies armv8.1-a and enables compiler support for the ARMv8.2-A architecture extensions.
The value armv8.1-a implies armv8-a and enables compiler support for the ARMv8.1-A architecture extension. In particular, it enables the +crc and +lse features.
The value native is available on native AArch64 GNU/Linux and causes the compiler to pick the architecture of the host system. This option has no effect if the compiler is unable to recognize the architecture of the host system,
The permissible values for feature are listed in the sub-section on aarch64-feature-modifiers,,-march and -mcpu Feature Modifiers. Where conflicting feature modifiers are specified, the right-most feature is used.
GCCuses name to determine what kind of instructions it can emit when generating assembly code. If -march is specified without either of -mtune or -mcpu also being specified, the code is tuned to perform well across a range of target processors implementing the target architecture. - -mtune=name
-
Specify the name of the target processor for which GCCshould tune the performance of the code. Permissible values for this option are: generic, cortex-a35, cortex-a53, cortex-a57, cortex-a72, cortex-a73, exynos-m1, falkor, qdf24xx, xgene1, vulcan, thunderx, thunderxt88, thunderxt88p1, thunderxt81, thunderxt83, thunderx2t99, cortex-a57.cortex-a53, cortex-a72.cortex-a53, cortex-a73.cortex-a35, cortex-a73.cortex-a53, native.
The values cortex-a57.cortex-a53, cortex-a72.cortex-a53, cortex-a73.cortex-a35, cortex-a73.cortex-a53 specify that
GCCshould tune for a big.LITTLE system.Additionally on native AArch64 GNU/Linux systems the value native tunes performance to the host system. This option has no effect if the compiler is unable to recognize the processor of the host system.
Where none of -mtune=, -mcpu= or -march= are specified, the code is tuned to perform well across a range of target processors.
This option cannot be suffixed by feature modifiers.
- -mcpu=name
-
Specify the name of the target processor, optionally suffixed by one
or more feature modifiers. This option has the form
-mcpu=cpu{+[no]feature}*, where
the permissible values for cpu are the same as those available
for -mtune. The permissible values for feature are
documented in the sub-section on
aarch64-feature-modifiers,,-march and -mcpu
Feature Modifiers. Where conflicting feature modifiers are
specified, the right-most feature is used.
GCCuses name to determine what kind of instructions it can emit when generating assembly code (as if by -march) and to determine the target processor for which to tune for performance (as if by -mtune). Where this option is used in conjunction with -march or -mtune, those options take precedence over the appropriate part of this option.
- -moverride=string
-
Override tuning decisions made by the back-end in response to a
-mtune= switch. The syntax, semantics, and accepted values
for string in this option are not guaranteed to be consistent
across releases.
This option is only intended to be useful when developing
GCC. - -mpc-relative-literal-loads
- Enable PC-relative literal loads. With this option literal pools are accessed using a single instruction and emitted after each function. This limits the maximum size of functions to 1MB. This is enabled by default for -mcmodel=tiny.
- -msign-return-address=scope
- Select the function scope on which return address signing will be applied. Permissible values are none, which disables return address signing, non-leaf, which enables pointer signing for functions which are not leaf functions, and all, which enables pointer signing for all functions. The default value is none.
-march and -mcpu Feature Modifiers
Feature modifiers used with -march and -mcpu can be any of the following and their inverses nofeature:
- crc
-
Enable CRCextension. This is on by default for -march=armv8.1-a.
- crypto
-
Enable Crypto extension. This also enables Advanced SIMDand floating-point instructions.
- fp
- Enable floating-point instructions. This is on by default for all possible values for options -march and -mcpu.
- simd
-
Enable Advanced SIMDinstructions. This also enables floating-point instructions. This is on by default for all possible values for options -march and -mcpu.
- lse
- Enable Large System Extension instructions. This is on by default for -march=armv8.1-a.
- fp16
-
Enable FP16extension. This also enables floating-point instructions.
Feature crypto implies simd, which implies fp. Conversely, nofp implies nosimd, which implies nocrypto.
Adapteva Epiphany Options
These -m options are defined for Adapteva Epiphany:
- -mhalf-reg-file
- Don't allocate any register in the range "r32"..."r63". That allows code to run on hardware variants that lack these registers.
- -mprefer-short-insn-regs
- Preferentially allocate registers that allow short instruction generation. This can result in increased instruction count, so this may either reduce or increase overall code size.
- -mbranch-cost=num
- Set the cost of branches to roughly num ``simple'' instructions. This cost is only a heuristic and is not guaranteed to produce consistent results across releases.
- -mcmove
- Enable the generation of conditional moves.
- -mnops=num
- Emit num NOPs before every other generated instruction.
- -mno-soft-cmpsf
- For single-precision floating-point comparisons, emit an "fsub" instruction and test the flags. This is faster than a software comparison, but can get incorrect results in the presence of NaNs, or when two different small numbers are compared such that their difference is calculated as zero. The default is -msoft-cmpsf, which uses slower, but IEEE-compliant, software comparisons.
- -mstack-offset=num
-
Set the offset between the top of the stack and the stack pointer.
E.g., a value of 8 means that the eight bytes in the range "sp+0...sp+7"
can be used by leaf functions without stack allocation.
Values other than 8 or 16 are untested and unlikely to work.
Note also that this option changes the ABI; compiling a program with a different stack offset than the libraries have been compiled with generally does not work. This option can be useful if you want to evaluate if a different stack offset would give you better code, but to actually use a different stack offset to build working programs, it is recommended to configure the toolchain with the appropriate --with-stack-offset=num option.
- -mno-round-nearest
- Make the scheduler assume that the rounding mode has been set to truncating. The default is -mround-nearest.
- -mlong-calls
- If not otherwise specified by an attribute, assume all calls might be beyond the offset range of the "b" / "bl" instructions, and therefore load the function address into a register before performing a (otherwise direct) call. This is the default.
- -mshort-calls
- If not otherwise specified by an attribute, assume all direct calls are in the range of the "b" / "bl" instructions, so use these instructions for direct calls. The default is -mlong-calls.
- -msmall16
- Assume addresses can be loaded as 16-bit unsigned values. This does not apply to function addresses for which -mlong-calls semantics are in effect.
- -mfp-mode=mode
-
Set the prevailing mode of the floating-point unit.
This determines the floating-point mode that is provided and expected
at function call and return time. Making this mode match the mode you
predominantly need at function start can make your programs smaller and
faster by avoiding unnecessary mode switches.
mode can be set to one the following values:
-
- caller
-
Any mode at function entry is valid, and retained or restored when
the function returns, and when it calls other functions.
This mode is useful for compiling libraries or other compilation units
you might want to incorporate into different programs with different
prevailing FPUmodes, and the convenience of being able to use a single object file outweighs the size and speed overhead for any extra mode switching that might be needed, compared with what would be needed with a more specific choice of prevailingFPUmode.
- truncate
- This is the mode used for floating-point calculations with truncating (i.e. round towards zero) rounding mode. That includes conversion from floating point to integer.
- round-nearest
- This is the mode used for floating-point calculations with round-to-nearest-or-even rounding mode.
- int
-
This is the mode used to perform integer calculations in the FPU,e.g. integer multiply, or integer multiply-and-accumulate.
-
The default is -mfp-mode=caller
-
- -mnosplit-lohi
- -mno-postinc
- -mno-postmodify
- Code generation tweaks that disable, respectively, splitting of 32-bit loads, generation of post-increment addresses, and generation of post-modify addresses. The defaults are msplit-lohi, -mpost-inc, and -mpost-modify.
- -mnovect-double
-
Change the preferred SIMDmode to SImode. The default is -mvect-double, which uses DImode as preferredSIMDmode.
- -max-vect-align=num
-
The maximum alignment for SIMDvector mode types. num may be 4 or 8. The default is 8. Note that this is anABIchange, even though many library function interfaces are unaffected if they don't useSIMDvector modes in places that affect size and/or alignment of relevant types.
- -msplit-vecmove-early
- Split vector moves into single word moves before reload. In theory this can give better register allocation, but so far the reverse seems to be generally the case.
- -m1reg-reg
- Specify a register to hold the constant -1, which makes loading small negative constants and certain bitmasks faster. Allowable values for reg are r43 and r63, which specify use of that register as a fixed register, and none, which means that no register is used for this purpose. The default is -m1reg-none.
The following options control the architecture variant for which code is being compiled:
- -mbarrel-shifter
- Generate instructions supported by barrel shifter. This is the default unless -mcpu=ARC601 or -mcpu=ARCEM is in effect.
- -mcpu=cpu
-
Set architecture type, register usage, and instruction scheduling
parameters for cpu. There are also shortcut alias options
available for backward compatibility and convenience. Supported
values for cpu are
-
- arc600
-
Compile for ARC600.Aliases: -mA6, -mARC600.
- arc601
-
Compile for ARC601.Alias: -mARC601.
- arc700
-
Compile for ARC700.Aliases: -mA7, -mARC700. This is the default when configured with --with-cpu=arc700.
- arcem
-
Compile for ARC EM.
- archs
-
Compile for ARC HS.
- em
-
Compile for ARC EM CPUwith no hardware extensions.
- em4
-
Compile for ARC EM4 CPU.
- em4_dmips
-
Compile for ARC EM4 DMIPS CPU.
- em4_fpus
-
Compile for ARC EM4 DMIPS CPUwith the single-precision floating-point extension.
- em4_fpuda
-
Compile for ARC EM4 DMIPS CPUwith single-precision floating-point and double assist instructions.
- hs
-
Compile for ARC HS CPUwith no hardware extensions except the atomic instructions.
- hs34
-
Compile for ARC HS34 CPU.
- hs38
-
Compile for ARC HS38 CPU.
- hs38_linux
-
Compile for ARC HS38 CPUwith all hardware extensions on.
- arc600_norm
-
Compile for ARC 600 CPUwith "norm" instructions enabled.
- arc600_mul32x16
-
Compile for ARC 600 CPUwith "norm" and 32x16-bit multiply instructions enabled.
- arc600_mul64
-
Compile for ARC 600 CPUwith "norm" and "mul64"-family instructions enabled.
- arc601_norm
-
Compile for ARC 601 CPUwith "norm" instructions enabled.
- arc601_mul32x16
-
Compile for ARC 601 CPUwith "norm" and 32x16-bit multiply instructions enabled.
- arc601_mul64
-
Compile for ARC 601 CPUwith "norm" and "mul64"-family instructions enabled.
- nps400
-
Compile for ARC 700onNPS400chip.
-
- -mdpfp
- -mdpfp-compact
-
Generate double-precision FPXinstructions, tuned for the compact implementation.
- -mdpfp-fast
-
Generate double-precision FPXinstructions, tuned for the fast implementation.
- -mno-dpfp-lrsr
-
Disable "lr" and "sr" instructions from using FPXextension aux registers.
- -mea
- Generate extended arithmetic instructions. Currently only "divaw", "adds", "subs", and "sat16" are supported. This is always enabled for -mcpu=ARC700.
- -mno-mpy
-
Do not generate "mpy"-family instructions for ARC700.This option is deprecated.
- -mmul32x16
- Generate 32x16-bit multiply and multiply-accumulate instructions.
- -mmul64
- Generate "mul64" and "mulu64" instructions. Only valid for -mcpu=ARC600.
- -mnorm
- Generate "norm" instructions. This is the default if -mcpu=ARC700 is in effect.
- -mspfp
- -mspfp-compact
-
Generate single-precision FPXinstructions, tuned for the compact implementation.
- -mspfp-fast
-
Generate single-precision FPXinstructions, tuned for the fast implementation.
- -msimd
-
Enable generation of ARC SIMDinstructions via target-specific builtins. Only valid for -mcpu=ARC700.
- -msoft-float
-
This option ignored; it is provided for compatibility purposes only.
Software floating-point code is emitted by default, and this default
can overridden by FPXoptions; -mspfp, -mspfp-compact, or -mspfp-fast for single precision, and -mdpfp, -mdpfp-compact, or -mdpfp-fast for double precision.
- -mswap
- Generate "swap" instructions.
- -matomic
-
This enables use of the locked load/store conditional extension to implement
atomic memory built-in functions. Not available for ARC6xx orARC EMcores.
- -mdiv-rem
- Enable "div" and "rem" instructions for ARCv2 cores.
- -mcode-density
-
Enable code density instructions for ARC EM.This option is on by default forARC HS.
- -mll64
-
Enable double load/store operations for ARC HScores.
- -mtp-regno=regno
- Specify thread pointer register number.
- -mmpy-option=multo
-
Compile ARCv2 code with a multiplier design option. You can specify
the option using either a string or numeric value for multo.
wlh1 is the default value. The recognized values are:
-
- 0
- none
- No multiplier available.
- 1
- w
- 16x16 multiplier, fully pipelined. The following instructions are enabled: "mpyw" and "mpyuw".
- 2
- wlh1
- 32x32 multiplier, fully pipelined (1 stage). The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu", and "mpy_s".
- 3
- wlh2
- 32x32 multiplier, fully pipelined (2 stages). The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu", and "mpy_s".
- 4
- wlh3
- Two 16x16 multipliers, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu", and "mpy_s".
- 5
- wlh4
- One 16x16 multiplier, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu", and "mpy_s".
- 6
- wlh5
- One 32x4 multiplier, blocking, sequential. The following instructions are additionally enabled: "mpy", "mpyu", "mpym", "mpymu", and "mpy_s".
- 7
- plus_dmpy
-
ARC HS SIMDsupport.
- 8
- plus_macd
-
ARC HS SIMDsupport.
- 9
- plus_qmacw
-
ARC HS SIMDsupport.
-
This option is only available for ARCv2 cores.
-
- -mfpu=fpu
-
Enables support for specific floating-point hardware extensions for ARCv2
cores. Supported values for fpu are:
-
- fpus
- Enables support for single-precision floating-point hardware extensions.
- fpud
-
Enables support for double-precision floating-point hardware
extensions. The single-precision floating-point extension is also
enabled. Not available for ARC EM.
- fpuda
-
Enables support for double-precision floating-point hardware
extensions using double-precision assist instructions. The single-precision
floating-point extension is also enabled. This option is
only available for ARC EM.
- fpuda_div
-
Enables support for double-precision floating-point hardware
extensions using double-precision assist instructions.
The single-precision floating-point, square-root, and divide
extensions are also enabled. This option is
only available for ARC EM.
- fpuda_fma
-
Enables support for double-precision floating-point hardware
extensions using double-precision assist instructions.
The single-precision floating-point and fused multiply and add
hardware extensions are also enabled. This option is
only available for ARC EM.
- fpuda_all
-
Enables support for double-precision floating-point hardware
extensions using double-precision assist instructions.
All single-precision floating-point hardware extensions are also
enabled. This option is only available for ARC EM.
- fpus_div
- Enables support for single-precision floating-point, square-root and divide hardware extensions.
- fpud_div
-
Enables support for double-precision floating-point, square-root and divide
hardware extensions. This option
includes option fpus_div. Not available for ARC EM.
- fpus_fma
- Enables support for single-precision floating-point and fused multiply and add hardware extensions.
- fpud_fma
-
Enables support for double-precision floating-point and
fused multiply and add hardware extensions. This option
includes option fpus_fma. Not available for ARC EM.
- fpus_all
- Enables support for all single-precision floating-point hardware extensions.
- fpud_all
-
Enables support for all single- and double-precision floating-point
hardware extensions. Not available for ARC EM.
-
The following options are passed through to the assembler, and also define preprocessor macro symbols.
- -mdsp-packa
-
Passed down to the assembler to enable the DSPPack A extensions. Also sets the preprocessor symbol "__Xdsp_packa". This option is deprecated.
- -mdvbf
- Passed down to the assembler to enable the dual Viterbi butterfly extension. Also sets the preprocessor symbol "__Xdvbf". This option is deprecated.
- -mlock
- Passed down to the assembler to enable the locked load/store conditional extension. Also sets the preprocessor symbol "__Xlock".
- -mmac-d16
- Passed down to the assembler. Also sets the preprocessor symbol "__Xxmac_d16". This option is deprecated.
- -mmac-24
- Passed down to the assembler. Also sets the preprocessor symbol "__Xxmac_24". This option is deprecated.
- -mrtsc
- Passed down to the assembler to enable the 64-bit time-stamp counter extension instruction. Also sets the preprocessor symbol "__Xrtsc". This option is deprecated.
- -mswape
- Passed down to the assembler to enable the swap byte ordering extension instruction. Also sets the preprocessor symbol "__Xswape".
- -mtelephony
- Passed down to the assembler to enable dual- and single-operand instructions for telephony. Also sets the preprocessor symbol "__Xtelephony". This option is deprecated.
- -mxy
-
Passed down to the assembler to enable the XYmemory extension. Also sets the preprocessor symbol "__Xxy".
The following options control how the assembly code is annotated:
- -misize
- Annotate assembler instructions with estimated addresses.
- -mannotate-align
- Explain what alignment considerations lead to the decision to make an instruction short or long.
The following options are passed through to the linker:
- -marclinux
- Passed through to the linker, to specify use of the "arclinux" emulation. This option is enabled by default in tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets when profiling is not requested.
- -marclinux_prof
- Passed through to the linker, to specify use of the "arclinux_prof" emulation. This option is enabled by default in tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets when profiling is requested.
The following options control the semantics of generated code:
- -mlong-calls
- Generate calls as register indirect calls, thus providing access to the full 32-bit address range.
- -mmedium-calls
- Don't use less than 25-bit addressing range for calls, which is the offset available for an unconditional branch-and-link instruction. Conditional execution of function calls is suppressed, to allow use of the 25-bit range, rather than the 21-bit range with conditional branch-and-link. This is the default for tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets.
- -mno-sdata
- Do not generate sdata references. This is the default for tool chains built for "arc-linux-uclibc" and "arceb-linux-uclibc" targets.
- -mvolatile-cache
- Use ordinarily cached memory accesses for volatile references. This is the default.
- -mno-volatile-cache
- Enable cache bypass for volatile references.
The following options fine tune code generation:
- -malign-call
- Do alignment optimizations for call instructions.
- -mauto-modify-reg
- Enable the use of pre/post modify with register displacement.
- -mbbit-peephole
- Enable bbit peephole2.
- -mno-brcc
- This option disables a target-specific pass in arc_reorg to generate compare-and-branch ("brcc") instructions. It has no effect on generation of these instructions driven by the combiner pass.
- -mcase-vector-pcrel
- Use PC-relative switch case tables to enable case table shortening. This is the default for -Os.
- -mcompact-casesi
- Enable compact "casesi" pattern. This is the default for -Os, and only available for ARCv1 cores.
- -mno-cond-exec
-
Disable the ARCompact-specific pass to generate conditional
execution instructions.
Due to delay slot scheduling and interactions between operand numbers, literal sizes, instruction lengths, and the support for conditional execution, the target-independent pass to generate conditional execution is often lacking, so the
ARCport has kept a special pass around that tries to find more conditional execution generation opportunities after register allocation, branch shortening, and delay slot scheduling have been done. This pass generally, but not always, improves performance and code size, at the cost of extra compilation time, which is why there is an option to switch it off. If you have a problem with call instructions exceeding their allowable offset range because they are conditionalized, you should consider using -mmedium-calls instead. - -mearly-cbranchsi
- Enable pre-reload use of the "cbranchsi" pattern.
- -mexpand-adddi
-
Expand "adddi3" and "subdi3" at RTLgeneration time into "add.f", "adc" etc.
- -mindexed-loads
-
Enable the use of indexed loads. This can be problematic because some
optimizers then assume that indexed stores exist, which is not
the case.
Enable Local Register Allocation. This is still experimental for
ARC,so by default the compiler uses standard reload (i.e. -mno-lra). - -mlra-priority-none
- Don't indicate any priority for target registers.
- -mlra-priority-compact
- Indicate target register priority for r0..r3 / r12..r15.
- -mlra-priority-noncompact
- Reduce target register priority for r0..r3 / r12..r15.
- -mno-millicode
- When optimizing for size (using -Os), prologues and epilogues that have to save or restore a large number of registers are often shortened by using call to a special function in libgcc; this is referred to as a millicode call. As these calls can pose performance issues, and/or cause linking issues when linking in a nonstandard way, this option is provided to turn off millicode call generation.
- -mmixed-code
- Tweak register allocation to help 16-bit instruction generation. This generally has the effect of decreasing the average instruction size while increasing the instruction count.
- -mq-class
- Enable q instruction alternatives. This is the default for -Os.
- -mRcq
- Enable Rcq constraint handling. Most short code generation depends on this. This is the default.
- -mRcw
- Enable Rcw constraint handling. Most ccfsm condexec mostly depends on this. This is the default.
- -msize-level=level
-
Fine-tune size optimization with regards to instruction lengths and alignment.
The recognized values for level are:
-
- 0
- No size optimization. This level is deprecated and treated like 1.
- 1
- Short instructions are used opportunistically.
- 2
- In addition, alignment of loops and of code after barriers are dropped.
- 3
- In addition, optional data alignment is dropped, and the option Os is enabled.
-
This defaults to 3 when -Os is in effect. Otherwise, the behavior when this is not set is equivalent to level 1.
-
- -mtune=cpu
-
Set instruction scheduling parameters for cpu, overriding any implied
by -mcpu=.
Supported values for cpu are
-
- ARC600
-
Tune for ARC600 CPU.
- ARC601
-
Tune for ARC601 CPU.
- ARC700
-
Tune for ARC700 CPUwith standard multiplier block.
- ARC700-xmac
-
Tune for ARC700 CPUwithXMACblock.
- ARC725D
-
Tune for ARC725D CPU.
- ARC750D
-
Tune for ARC750D CPU.
-
- -mmultcost=num
- Cost to assume for a multiply instruction, with 4 being equal to a normal instruction.
- -munalign-prob-threshold=probability
-
Set probability threshold for unaligning branches.
When tuning for ARC700and optimizing for speed, branches without filled delay slot are preferably emitted unaligned and long, unless profiling indicates that the probability for the branch to be taken is below probability. The default is (REG_BR_PROB_BASE/2), i.e. 5000.
The following options are maintained for backward compatibility, but are now deprecated and will be removed in a future release:
- -margonaut
-
Obsolete FPX.
- -mbig-endian
- -EB
-
Compile code for big-endian targets. Use of these options is now
deprecated. Big-endian code is supported by configuring GCCto build "arceb-elf32" and "arceb-linux-uclibc" targets, for which big endian is the default.
- -mlittle-endian
- -EL
-
Compile code for little-endian targets. Use of these options is now
deprecated. Little-endian code is supported by configuring GCCto build "arc-elf32" and "arc-linux-uclibc" targets, for which little endian is the default.
- -mbarrel_shifter
- Replaced by -mbarrel-shifter.
- -mdpfp_compact
- Replaced by -mdpfp-compact.
- -mdpfp_fast
- Replaced by -mdpfp-fast.
- -mdsp_packa
- Replaced by -mdsp-packa.
- -mEA
- Replaced by -mea.
- -mmac_24
- Replaced by -mmac-24.
- -mmac_d16
- Replaced by -mmac-d16.
- -mspfp_compact
- Replaced by -mspfp-compact.
- -mspfp_fast
- Replaced by -mspfp-fast.
- -mtune=cpu
-
Values arc600, arc601, arc700 and
arc700-xmac for cpu are replaced by ARC600,ARC601,ARC700and ARC700-xmac respectively.
- -multcost=num
- Replaced by -mmultcost.
These -m options are defined for the
- -mabi=name
-
Generate code for the specified ABI.Permissible values are: apcs-gnu, atpcs, aapcs, aapcs-linux and iwmmxt.
- -mapcs-frame
-
Generate a stack frame that is compliant with the ARMProcedure Call Standard for all functions, even if this is not strictly necessary for correct execution of the code. Specifying -fomit-frame-pointer with this option causes the stack frames not to be generated for leaf functions. The default is -mno-apcs-frame. This option is deprecated.
- -mapcs
- This is a synonym for -mapcs-frame and is deprecated.
- -mthumb-interwork
-
Generate code that supports calling between the ARMand Thumb instruction sets. Without this option, on pre-v5 architectures, the two instruction sets cannot be reliably used inside one program. The default is -mno-thumb-interwork, since slightly larger code is generated when -mthumb-interwork is specified. InAAPCSconfigurations this option is meaningless.
- -mno-sched-prolog
- Prevent the reordering of instructions in the function prologue, or the merging of those instruction with the instructions in the function's body. This means that all functions start with a recognizable set of instructions (or in fact one of a choice from a small set of different function prologues), and this information can be used to locate the start of functions inside an executable piece of code. The default is -msched-prolog.
- -mfloat-abi=name
-
Specifies which floating-point ABIto use. Permissible values are: soft, softfp and hard.
Specifying soft causes
GCCto generate output containing library calls for floating-point operations. softfp allows the generation of code using hardware floating-point instructions, but still uses the soft-float calling conventions. hard allows generation of floating-point instructions and uses FPU-specific calling conventions.The default depends on the specific target configuration. Note that the hard-float and soft-float ABIs are not link-compatible; you must compile your entire program with the same
ABI,and link with a compatible set of libraries. - -mlittle-endian
- Generate code for a processor running in little-endian mode. This is the default for all standard configurations.
- -mbig-endian
- Generate code for a processor running in big-endian mode; the default is to compile code for a little-endian processor.
- -march=name
-
This specifies the name of the target ARMarchitecture.GCCuses this name to determine what kind of instructions it can emit when generating assembly code. This option can be used in conjunction with or instead of the -mcpu= option. Permissible names are: armv2, armv2a, armv3, armv3m, armv4, armv4t, armv5, armv5e, armv5t, armv5te, armv6, armv6-m, armv6j, armv6k, armv6kz, armv6s-m, armv6t2, armv6z, armv6zk, armv7, armv7-a, armv7-m, armv7-r, armv7e-m, armv7ve, armv8-a, armv8-a+crc, armv8.1-a, armv8.1-a+crc, armv8-m.base, armv8-m.main, armv8-m.main+dsp, iwmmxt, iwmmxt2.
Architecture revisions older than armv4t are deprecated.
-march=armv6s-m is the armv6-m architecture with support for the (now mandatory)
SVCinstruction.-march=armv6zk is an alias for armv6kz, existing for backwards compatibility.
-march=armv7ve is the armv7-a architecture with virtualization extensions.
-march=armv8-a+crc enables code generation for the ARMv8-A architecture together with the optional
CRC32extensions.-march=armv8.1-a enables compiler support for the ARMv8.1-A architecture. This also enables the features provided by -march=armv8-a+crc.
-march=armv8.2-a enables compiler support for the ARMv8.2-A architecture. This also enables the features provided by -march=armv8.1-a.
-march=armv8.2-a+fp16 enables compiler support for the ARMv8.2-A architecture with the optional
FP16instructions extension. This also enables the features provided by -march=armv8.1-a and implies -mfp16-format=ieee.-march=native causes the compiler to auto-detect the architecture of the build computer. At present, this feature is only supported on GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect.
- -mtune=name
-
This option specifies the name of the target ARMprocessor for whichGCCshould tune the performance of the code. For someARMimplementations better performance can be obtained by using this option. Permissible names are: arm2, arm250, arm3, arm6, arm60, arm600, arm610, arm620, arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700, arm700i, arm710, arm710c, arm7100, arm720, arm7500, arm7500fe, arm7tdmi, arm7tdmi-s, arm710t, arm720t, arm740t, strongarm, strongarm110, strongarm1100, strongarm1110, arm8, arm810, arm9, arm9e, arm920, arm920t, arm922t, arm946e-s, arm966e-s, arm968e-s, arm926ej-s, arm940t, arm9tdmi, arm10tdmi, arm1020t, arm1026ej-s, arm10e, arm1020e, arm1022e, arm1136j-s, arm1136jf-s, mpcore, mpcorenovfp, arm1156t2-s, arm1156t2f-s, arm1176jz-s, arm1176jzf-s, generic-armv7-a, cortex-a5, cortex-a7, cortex-a8, cortex-a9, cortex-a12, cortex-a15, cortex-a17, cortex-a32, cortex-a35, cortex-a53, cortex-a57, cortex-a72, cortex-a73, cortex-r4, cortex-r4f, cortex-r5, cortex-r7, cortex-r8, cortex-m33, cortex-m23, cortex-m7, cortex-m4, cortex-m3, cortex-m1, cortex-m0, cortex-m0plus, cortex-m1.small-multiply, cortex-m0.small-multiply, cortex-m0plus.small-multiply, exynos-m1, marvell-pj4, xscale, iwmmxt, iwmmxt2, ep9312, fa526, fa626, fa606te, fa626te, fmp626, fa726te, xgene1.
Additionally, this option can specify that
GCCshould tune the performance of the code for a big.LITTLE system. Permissible names are: cortex-a15.cortex-a7, cortex-a17.cortex-a7, cortex-a57.cortex-a53, cortex-a72.cortex-a53, cortex-a72.cortex-a35, cortex-a73.cortex-a53.-mtune=generic-arch specifies that
GCCshould tune the performance for a blend of processors within architecture arch. The aim is to generate code that run well on the current most popular processors, balancing between optimizations that benefit some CPUs in the range, and avoiding performance pitfalls of other CPUs. The effects of this option may change in futureGCCversions asCPUmodels come and go.-mtune=native causes the compiler to auto-detect the
CPUof the build computer. At present, this feature is only supported on GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect. - -mcpu=name
-
This specifies the name of the target ARMprocessor.GCCuses this name to derive the name of the targetARMarchitecture (as if specified by -march) and theARMprocessor type for which to tune for performance (as if specified by -mtune). Where this option is used in conjunction with -march or -mtune, those options take precedence over the appropriate part of this option.
Permissible names for this option are the same as those for -mtune.
-mcpu=generic-arch is also permissible, and is equivalent to -march=arch -mtune=generic-arch. See -mtune for more information.
-mcpu=native causes the compiler to auto-detect the
CPUof the build computer. At present, this feature is only supported on GNU/Linux, and not all architectures are recognized. If the auto-detect is unsuccessful the option has no effect. - -mfpu=name
-
This specifies what floating-point hardware (or hardware emulation) is
available on the target. Permissible names are: vfpv2, vfpv3,
vfpv3-fp16, vfpv3-d16, vfpv3-d16-fp16, vfpv3xd,
vfpv3xd-fp16, neon-vfpv3, neon-fp16, vfpv4,
vfpv4-d16, fpv4-sp-d16, neon-vfpv4,
fpv5-d16, fpv5-sp-d16,
fp-armv8, neon-fp-armv8 and crypto-neon-fp-armv8.
Note that neon is an alias for neon-vfpv3 and vfp
is an alias for vfpv2.
If -msoft-float is specified this specifies the format of floating-point values.
If the selected floating-point hardware includes the
NEONextension (e.g. -mfpu=neon), note that floating-point operations are not generated byGCC's auto-vectorization pass unless -funsafe-math-optimizations is also specified. This is becauseNEONhardware does not fully implement theIEEE 754standard for floating-point arithmetic (in particular denormal values are treated as zero), so the use ofNEONinstructions may lead to a loss of precision.You can also set the fpu name at function level by using the "target("fpu=")" function attributes or pragmas.
- -mfp16-format=name
- Specify the format of the "__fp16" half-precision floating-point type. Permissible names are none, ieee, and alternative; the default is none, in which case the "__fp16" type is not defined.
- -mstructure-size-boundary=n
-
The sizes of all structures and unions are rounded up to a multiple
of the number of bits set by this option. Permissible values are 8, 32
and 64. The default value varies for different toolchains. For the COFFtargeted toolchain the default value is 8. A value of 64 is only allowed if the underlyingABIsupports it.
Specifying a larger number can produce faster, more efficient code, but can also increase the size of the program. Different values are potentially incompatible. Code compiled with one value cannot necessarily expect to work with code or libraries compiled with another value, if they exchange information using structures or unions.
- -mabort-on-noreturn
- Generate a call to the function "abort" at the end of a "noreturn" function. It is executed if the function tries to return.
- -mlong-calls
- -mno-long-calls
-
Tells the compiler to perform function calls by first loading the
address of the function into a register and then performing a subroutine
call on this register. This switch is needed if the target function
lies outside of the 64-megabyte addressing range of the offset-based
version of subroutine call instruction.
Even if this switch is enabled, not all function calls are turned into long calls. The heuristic is that static functions, functions that have the "short_call" attribute, functions that are inside the scope of a "#pragma no_long_calls" directive, and functions whose definitions have already been compiled within the current compilation unit are not turned into long calls. The exceptions to this rule are that weak function definitions, functions with the "long_call" attribute or the "section" attribute, and functions that are within the scope of a "#pragma long_calls" directive are always turned into long calls.
This feature is not enabled by default. Specifying -mno-long-calls restores the default behavior, as does placing the function calls within the scope of a "#pragma long_calls_off" directive. Note these switches have no effect on how the compiler generates code to handle function calls via function pointers.
- -msingle-pic-base
-
Treat the register used for PICaddressing as read-only, rather than loading it in the prologue for each function. The runtime system is responsible for initializing this register with an appropriate value before execution begins.
- -mpic-register=reg
-
Specify the register to be used for PICaddressing. For standardPICbase case, the default is any suitable register determined by compiler. For singlePICbase case, the default is R9 if target isEABIbased or stack-checking is enabled, otherwise the default is R10.
- -mpic-data-is-text-relative
-
Assume that the displacement between the text and data segments is fixed
at static link time. This permits using PC-relative addressing
operations to access data known to be in the data segment. For
non-VxWorks RTPtargets, this option is enabled by default. When disabled on such targets, it will enable -msingle-pic-base by default.
- -mpoke-function-name
-
Write the name of each function into the text section, directly
preceding the function prologue. The generated code is similar to this:
t0 .ascii "arm_poke_function_name", 0 .align t1 .word 0xff000000 + (t1 - t0) arm_poke_function_name mov ip, sp stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #4
When performing a stack backtrace, code can inspect the value of "pc" stored at "fp + 0". If the trace function then looks at location "pc - 12" and the top 8 bits are set, then we know that there is a function name embedded immediately preceding this location and has length "((pc[-3]) & 0xff000000)".
- -mthumb
- -marm
-
Select between generating code that executes in ARMand Thumb states. The default for most configurations is to generate code that executes inARMstate, but the default can be changed by configuringGCCwith the --with-mode=state configure option.
You can also override the
ARMand Thumb mode for each function by using the "target("thumb")" and "target("arm")" function attributes or pragmas. - -mtpcs-frame
- Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all non-leaf functions. (A leaf function is one that does not call any other functions.) The default is -mno-tpcs-frame.
- -mtpcs-leaf-frame
- Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all leaf functions. (A leaf function is one that does not call any other functions.) The default is -mno-apcs-leaf-frame.
- -mcallee-super-interworking
-
Gives all externally visible functions in the file being compiled an ARMinstruction set header which switches to Thumb mode before executing the rest of the function. This allows these functions to be called from non-interworking code. This option is not valid inAAPCSconfigurations because interworking is enabled by default.
- -mcaller-super-interworking
-
Allows calls via function pointers (including virtual functions) to
execute correctly regardless of whether the target code has been
compiled for interworking or not. There is a small overhead in the cost
of executing a function pointer if this option is enabled. This option
is not valid in AAPCSconfigurations because interworking is enabled by default.
- -mtp=name
- Specify the access model for the thread local storage pointer. The valid models are soft, which generates calls to "__aeabi_read_tp", cp15, which fetches the thread pointer from "cp15" directly (supported in the arm6k architecture), and auto, which uses the best available method for the selected processor. The default setting is auto.
- -mtls-dialect=dialect
-
Specify the dialect to use for accessing thread local storage. Two
dialects are supported---gnu and gnu2. The
gnu dialect selects the original GNUscheme for supporting local and global dynamicTLSmodels. The gnu2 dialect selects theGNUdescriptor scheme, which provides better performance for shared libraries. TheGNUdescriptor scheme is compatible with the original scheme, but does require new assembler, linker and library support. Initial and local execTLSmodels are unaffected by this option and always use the original scheme.
- -mword-relocations
- Only generate absolute relocations on word-sized values (i.e. R_ARM_ABS32). This is enabled by default on targets (uClinux, SymbianOS) where the runtime loader imposes this restriction, and when -fpic or -fPIC is specified.
- -mfix-cortex-m3-ldrd
- Some Cortex-M3 cores can cause data corruption when "ldrd" instructions with overlapping destination and base registers are used. This option avoids generating these instructions. This option is enabled by default when -mcpu=cortex-m3 is specified.
- -munaligned-access
- -mno-unaligned-access
-
Enables (or disables) reading and writing of 16- and 32- bit values
from addresses that are not 16- or 32- bit aligned. By default
unaligned access is disabled for all pre-ARMv6, all ARMv6-M and for
ARMv8-M Baseline architectures, and enabled for all other
architectures. If unaligned access is not enabled then words in packed
data structures are accessed a byte at a time.
The
ARMattribute "Tag_CPU_unaligned_access" is set in the generated object file to either true or false, depending upon the setting of this option. If unaligned access is enabled then the preprocessor symbol "__ARM_FEATURE_UNALIGNED" is also defined. - -mneon-for-64bits
- Enables using Neon to handle scalar 64-bits operations. This is disabled by default since the cost of moving data from core registers to Neon is high.
- -mslow-flash-data
- Assume loading data from flash is slower than fetching instruction. Therefore literal load is minimized for better performance. This option is only supported when compiling for ARMv7 M-profile and off by default.
- -masm-syntax-unified
-
Assume inline assembler is using unified asm syntax. The default is
currently off which implies divided syntax. This option has no impact
on Thumb2. However, this may change in future releases of GCC.Divided syntax should be considered deprecated.
- -mrestrict-it
-
Restricts generation of ITblocks to conform to the rules of ARMv8.ITblocks can only contain a single 16-bit instruction from a select set of instructions. This option is on by default for ARMv8 Thumb mode.
- -mprint-tune-info
-
Print CPUtuning information as comment in assembler file. This is an option used only for regression testing of the compiler and not intended for ordinary use in compiling code. This option is disabled by default.
- -mpure-code
-
Do not allow constant data to be placed in code sections.
Additionally, when compiling for ELFobject format give all text sections theELFprocessor-specific section attribute "SHF_ARM_PURECODE". This option is only available when generating non-pic code for ARMv7-M targets.
- -mcmse
- Generate secure code as per the ``ARMv8-M Security Extensions: Requirements on Development Tools Engineering Specification'', which can be found on <infocenter.arm.com/help/topic/com.arm.doc.ecm0359818/ECM0359818_armv8m_security_extensions_reqs_on_dev_tools_1_0.pdf>.
These options are defined for
- -mmcu=mcu
-
Specify Atmel AVRinstruction set architectures (ISA) orMCUtype.
The default for this option is@tie{}avr2.
GCCsupports the followingAVRdevices and ISAs:-
- avr2
- ``Classic'' devices with up to 8@tie{}KiB of program memory. mcu@tie{}= "attiny22", "attiny26", "at90c8534", "at90s2313", "at90s2323", "at90s2333", "at90s2343", "at90s4414", "at90s4433", "at90s4434", "at90s8515", "at90s8535".
- avr25
- ``Classic'' devices with up to 8@tie{}KiB of program memory and with the "MOVW" instruction. mcu@tie{}= "ata5272", "ata6616c", "attiny13", "attiny13a", "attiny2313", "attiny2313a", "attiny24", "attiny24a", "attiny25", "attiny261", "attiny261a", "attiny43u", "attiny4313", "attiny44", "attiny44a", "attiny441", "attiny45", "attiny461", "attiny461a", "attiny48", "attiny828", "attiny84", "attiny84a", "attiny841", "attiny85", "attiny861", "attiny861a", "attiny87", "attiny88", "at86rf401".
- avr3
- ``Classic'' devices with 16@tie{}KiB up to 64@tie{}KiB of program memory. mcu@tie{}= "at43usb355", "at76c711".
- avr31
- ``Classic'' devices with 128@tie{}KiB of program memory. mcu@tie{}= "atmega103", "at43usb320".
- avr35
- ``Classic'' devices with 16@tie{}KiB up to 64@tie{}KiB of program memory and with the "MOVW" instruction. mcu@tie{}= "ata5505", "ata6617c", "ata664251", "atmega16u2", "atmega32u2", "atmega8u2", "attiny1634", "attiny167", "at90usb162", "at90usb82".
- avr4
- ``Enhanced'' devices with up to 8@tie{}KiB of program memory. mcu@tie{}= "ata6285", "ata6286", "ata6289", "ata6612c", "atmega48", "atmega48a", "atmega48p", "atmega48pa", "atmega48pb", "atmega8", "atmega8a", "atmega8hva", "atmega8515", "atmega8535", "atmega88", "atmega88a", "atmega88p", "atmega88pa", "atmega88pb", "at90pwm1", "at90pwm2", "at90pwm2b", "at90pwm3", "at90pwm3b", "at90pwm81".
- avr5
- ``Enhanced'' devices with 16@tie{}KiB up to 64@tie{}KiB of program memory. mcu@tie{}= "ata5702m322", "ata5782", "ata5790", "ata5790n", "ata5791", "ata5795", "ata5831", "ata6613c", "ata6614q", "ata8210", "ata8510", "atmega16", "atmega16a", "atmega16hva", "atmega16hva2", "atmega16hvb", "atmega16hvbrevb", "atmega16m1", "atmega16u4", "atmega161", "atmega162", "atmega163", "atmega164a", "atmega164p", "atmega164pa", "atmega165", "atmega165a", "atmega165p", "atmega165pa", "atmega168", "atmega168a", "atmega168p", "atmega168pa", "atmega168pb", "atmega169", "atmega169a", "atmega169p", "atmega169pa", "atmega32", "atmega32a", "atmega32c1", "atmega32hvb", "atmega32hvbrevb", "atmega32m1", "atmega32u4", "atmega32u6", "atmega323", "atmega324a", "atmega324p", "atmega324pa", "atmega325", "atmega325a", "atmega325p", "atmega325pa", "atmega3250", "atmega3250a", "atmega3250p", "atmega3250pa", "atmega328", "atmega328p", "atmega328pb", "atmega329", "atmega329a", "atmega329p", "atmega329pa", "atmega3290", "atmega3290a", "atmega3290p", "atmega3290pa", "atmega406", "atmega64", "atmega64a", "atmega64c1", "atmega64hve", "atmega64hve2", "atmega64m1", "atmega64rfr2", "atmega640", "atmega644", "atmega644a", "atmega644p", "atmega644pa", "atmega644rfr2", "atmega645", "atmega645a", "atmega645p", "atmega6450", "atmega6450a", "atmega6450p", "atmega649", "atmega649a", "atmega649p", "atmega6490", "atmega6490a", "atmega6490p", "at90can32", "at90can64", "at90pwm161", "at90pwm216", "at90pwm316", "at90scr100", "at90usb646", "at90usb647", "at94k", "m3000".
- avr51
- ``Enhanced'' devices with 128@tie{}KiB of program memory. mcu@tie{}= "atmega128", "atmega128a", "atmega128rfa1", "atmega128rfr2", "atmega1280", "atmega1281", "atmega1284", "atmega1284p", "atmega1284rfr2", "at90can128", "at90usb1286", "at90usb1287".
- avr6
-
``Enhanced'' devices with 3-byte PC,i.e. with more than 128@tie{}KiB of program memory. mcu@tie{}= "atmega256rfr2", "atmega2560", "atmega2561", "atmega2564rfr2".
- avrxmega2
-
``XMEGA''devices with more than 8@tie{}KiB and up to 64@tie{}KiB of program memory. mcu@tie{}= "atxmega16a4", "atxmega16a4u", "atxmega16c4", "atxmega16d4", "atxmega16e5", "atxmega32a4", "atxmega32a4u", "atxmega32c3", "atxmega32c4", "atxmega32d3", "atxmega32d4", "atxmega32e5", "atxmega8e5".
- avrxmega4
-
``XMEGA''devices with more than 64@tie{}KiB and up to 128@tie{}KiB of program memory. mcu@tie{}= "atxmega64a3", "atxmega64a3u", "atxmega64a4u", "atxmega64b1", "atxmega64b3", "atxmega64c3", "atxmega64d3", "atxmega64d4".
- avrxmega5
-
``XMEGA''devices with more than 64@tie{}KiB and up to 128@tie{}KiB of program memory and more than 64@tie{}KiB ofRAM.mcu@tie{}= "atxmega64a1", "atxmega64a1u".
- avrxmega6
-
``XMEGA''devices with more than 128@tie{}KiB of program memory. mcu@tie{}= "atxmega128a3", "atxmega128a3u", "atxmega128b1", "atxmega128b3", "atxmega128c3", "atxmega128d3", "atxmega128d4", "atxmega192a3", "atxmega192a3u", "atxmega192c3", "atxmega192d3", "atxmega256a3", "atxmega256a3b", "atxmega256a3bu", "atxmega256a3u", "atxmega256c3", "atxmega256d3", "atxmega384c3", "atxmega384d3".
- avrxmega7
-
``XMEGA''devices with more than 128@tie{}KiB of program memory and more than 64@tie{}KiB ofRAM.mcu@tie{}= "atxmega128a1", "atxmega128a1u", "atxmega128a4u".
- avrtiny
-
``TINY''Tiny core devices with 512@tie{}B up to 4@tie{}KiB of program memory. mcu@tie{}= "attiny10", "attiny20", "attiny4", "attiny40", "attiny5", "attiny9".
- avr1
-
This ISAis implemented by the minimalAVRcore and supported for assembler only. mcu@tie{}= "attiny11", "attiny12", "attiny15", "attiny28", "at90s1200".
-
- -mabsdata
-
Assume that all data in static storage can be accessed by LDS / STSinstructions. This option has only an effect on reduced Tiny devices like ATtiny40. See also the "absdata"AVRVariable Attributes,variable attribute.
- -maccumulate-args
-
Accumulate outgoing function arguments and acquire/release the needed
stack space for outgoing function arguments once in function
prologue/epilogue. Without this option, outgoing arguments are pushed
before calling a function and popped afterwards.
Popping the arguments after the function call can be expensive on
AVRso that accumulating the stack space might lead to smaller executables because arguments need not be removed from the stack after such a function call.This option can lead to reduced code size for functions that perform several calls to functions that get their arguments on the stack like calls to printf-like functions.
- -mbranch-cost=cost
- Set the branch costs for conditional branch instructions to cost. Reasonable values for cost are small, non-negative integers. The default branch cost is 0.
- -mcall-prologues
- Functions prologues/epilogues are expanded as calls to appropriate subroutines. Code size is smaller.
- -mint8
- Assume "int" to be 8-bit integer. This affects the sizes of all types: a "char" is 1 byte, an "int" is 1 byte, a "long" is 2 bytes, and "long long" is 4 bytes. Please note that this option does not conform to the C standards, but it results in smaller code size.
- -mn-flash=num
- Assume that the flash memory has a size of num times 64@tie{}KiB.
- -mno-interrupts
- Generated code is not compatible with hardware interrupts. Code size is smaller.
- -mrelax
-
Try to replace "CALL" resp. "JMP" instruction by the shorter
"RCALL" resp. "RJMP" instruction if applicable.
Setting -mrelax just adds the --mlink-relax option to
the assembler's command line and the --relax option to the
linker's command line.
Jump relaxing is performed by the linker because jump offsets are not known before code is located. Therefore, the assembler code generated by the compiler is the same, but the instructions in the executable may differ from instructions in the assembler code.
Relaxing must be turned on if linker stubs are needed, see the section on "EIND" and linker stubs below.
- -mrmw
- Assume that the device supports the Read-Modify-Write instructions "XCH", "LAC", "LAS" and "LAT".
- -msp8
-
Treat the stack pointer register as an 8-bit register,
i.e. assume the high byte of the stack pointer is zero.
In general, you don't need to set this option by hand.
This option is used internally by the compiler to select and build multilibs for architectures "avr2" and "avr25". These architectures mix devices with and without "SPH". For any setting other than -mmcu=avr2 or -mmcu=avr25 the compiler driver adds or removes this option from the compiler proper's command line, because the compiler then knows if the device or architecture has an 8-bit stack pointer and thus no "SPH" register or not.
- -mstrict-X
-
Use address register "X" in a way proposed by the hardware. This means
that "X" is only used in indirect, post-increment or
pre-decrement addressing.
Without this option, the "X" register may be used in the same way as "Y" or "Z" which then is emulated by additional instructions. For example, loading a value with "X+const" addressing with a small non-negative "const < 64" to a register Rn is performed as
adiw r26, const ; X += const ld <Rn>, X ; <Rn> = *X sbiw r26, const ; X -= const
- -mtiny-stack
- Only change the lower 8@tie{}bits of the stack pointer.
- -mfract-convert-truncate
- Allow to use truncation instead of rounding towards zero for fractional fixed-point types.
- -nodevicelib
- Don't link against AVR-LibC's device specific library "lib<mcu>.a".
- -Waddr-space-convert
- Warn about conversions between address spaces in the case where the resulting address space is not contained in the incoming address space.
- -Wmisspelled-isr
-
Warn if the ISRis misspelled, i.e. without __vector prefix. Enabled by default.
"EIND" and Devices with More Than 128 Ki Bytes of Flash
Pointers in the implementation are 16@tie{}bits wide. The address of a function or label is represented as word address so that indirect jumps and calls can target any code address in the range of 64@tie{}Ki words.
In order to facilitate indirect jump on devices with more than 128@tie{}Ki bytes of program memory space, there is a special function register called "EIND" that serves as most significant part of the target address when "EICALL" or "EIJMP" instructions are used.
Indirect jumps and calls on these devices are handled as follows by the compiler and are subject to some limitations:
- *
- The compiler never sets "EIND".
- *
- The compiler uses "EIND" implicitly in "EICALL"/"EIJMP" instructions or might read "EIND" directly in order to emulate an indirect call/jump by means of a "RET" instruction.
- *
- The compiler assumes that "EIND" never changes during the startup code or during the application. In particular, "EIND" is not saved/restored in function or interrupt service routine prologue/epilogue.
- *
- For indirect calls to functions and computed goto, the linker generates stubs. Stubs are jump pads sometimes also called trampolines. Thus, the indirect call/jump jumps to such a stub. The stub contains a direct jump to the desired address.
- *
- Linker relaxation must be turned on so that the linker generates the stubs correctly in all situations. See the compiler option -mrelax and the linker option --relax. There are corner cases where the linker is supposed to generate stubs but aborts without relaxation and without a helpful error message.
- *
- The default linker script is arranged for code with "EIND = 0". If code is supposed to work for a setup with "EIND != 0", a custom linker script has to be used in order to place the sections whose name start with ".trampolines" into the segment where "EIND" points to.
- *
- The startup code from libgcc never sets "EIND". Notice that startup code is a blend of code from libgcc and AVR-LibC. For the impact of AVR-LibC on "EIND", see the AVR-LibC user manual ("nongnu.org/avr-libc/user-manual").
- *
-
It is legitimate for user-specific startup code to set up "EIND"
early, for example by means of initialization code located in
section ".init3". Such code runs prior to general startup code
that initializes RAMand calls constructors, but after the bit of startup code from AVR-LibC that sets "EIND" to the segment where the vector table is located.
#include <avr/io.h> static void __attribute__((section(".init3"),naked,used,no_instrument_function)) init3_set_eind (void) { __asm volatile ("ldi r24,pm_hh8(__trampolines_start)\n\t" "out %i0,r24" :: "n" (&EIND) : "r24","memory"); }
The "__trampolines_start" symbol is defined in the linker script.
- *
-
Stubs are generated automatically by the linker if
the following two conditions are met:
-
- -<The address of a label is taken by means of the gs modifier>
-
(short for generate stubs) like so:
LDI r24, lo8(gs(<func>)) LDI r25, hi8(gs(<func>))
- -<The final location of that label is in a code segment>
- outside the segment where the stubs are located.
-
- *
-
The compiler emits such "gs" modifiers for code labels in the
following situations:
-
- -<Taking address of a function or code label.>
- -<Computed goto.>
- -<If prologue-save function is used, see -mcall-prologues>
- command-line option.
- -<Switch/case dispatch tables. If you do not want such dispatch>
- tables you can specify the -fno-jump-tables command-line option.
- -<C and C++constructors/destructors called during startup/shutdown.>
- -<If the tools hit a gs() modifier explained above.>
-
- *
-
Jumping to non-symbolic addresses like so is not supported:
int main (void) { /* Call function at word address 0x2 */ return ((int(*)(void)) 0x2)(); }
Instead, a stub has to be set up, i.e. the function has to be called through a symbol ("func_4" in the example):
int main (void) { extern int func_4 (void); /* Call function at byte address 0x4 */ return func_4(); }
and the application be linked with -Wl,--defsym,func_4=0x4. Alternatively, "func_4" can be defined in the linker script.
Handling of the "RAMPD", "RAMPX", "RAMPY" and "RAMPZ" Special Function Registers
Some
- *
- The startup code initializes the "RAMP" special function registers with zero.
- *
-
If a AVRNamed Address Spaces,named address space other than generic or "__flash" is used, then "RAMPZ" is set as needed before the operation.
- *
-
If the device supports RAMlarger than 64@tie{}KiB and the compiler needs to change "RAMPZ" to accomplish an operation, "RAMPZ" is reset to zero after the operation.
- *
-
If the device comes with a specific "RAMP" register, the ISRprologue/epilogue saves/restores thatSFRand initializes it with zero in case theISRcode might (implicitly) use it.
- *
-
RAMlarger than 64@tie{}KiB is not supported byGCCforAVRtargets. If you use inline assembler to read from locations outside the 16-bit address range and change one of the "RAMP" registers, you must reset it to zero after the access.
For even more AVR-specific built-in macros see
- __AVR_ARCH__
-
Build-in macro that resolves to a decimal number that identifies the
architecture and depends on the -mmcu=mcu option.
Possible values are:
2, 25, 3, 31, 35, 4, 5, 51, 6
for mcu="avr2", "avr25", "avr3", "avr31", "avr35", "avr4", "avr5", "avr51", "avr6",
respectively and
100, 102, 104, 105, 106, 107
for mcu="avrtiny", "avrxmega2", "avrxmega4", "avrxmega5", "avrxmega6", "avrxmega7", respectively. If mcu specifies a device, this built-in macro is set accordingly. For example, with -mmcu=atmega8 the macro is defined to 4.
- __AVR_Device__
-
Setting -mmcu=device defines this built-in macro which reflects
the device's name. For example, -mmcu=atmega8 defines the
built-in macro "__AVR_ATmega8__", -mmcu=attiny261a defines
"__AVR_ATtiny261A__", etc.
The built-in macros' names follow the scheme "__AVR_Device__" where Device is the device name as from the
AVRuser manual. The difference between Device in the built-in macro and device in -mmcu=device is that the latter is always lowercase.If device is not a device but only a core architecture like avr51, this macro is not defined.
- __AVR_DEVICE_NAME__
-
Setting -mmcu=device defines this built-in macro to
the device's name. For example, with -mmcu=atmega8 the macro
is defined to "atmega8".
If device is not a device but only a core architecture like avr51, this macro is not defined.
- __AVR_XMEGA__
-
The device / architecture belongs to the XMEGAfamily of devices.
- __AVR_HAVE_ELPM__
- The device has the "ELPM" instruction.
- __AVR_HAVE_ELPMX__
- The device has the "ELPM Rn,Z" and "ELPM Rn,Z+" instructions.
- __AVR_HAVE_MOVW__
- The device has the "MOVW" instruction to perform 16-bit register-register moves.
- __AVR_HAVE_LPMX__
- The device has the "LPM Rn,Z" and "LPM Rn,Z+" instructions.
- __AVR_HAVE_MUL__
- The device has a hardware multiplier.
- __AVR_HAVE_JMP_CALL__
- The device has the "JMP" and "CALL" instructions. This is the case for devices with at least 16@tie{}KiB of program memory.
- __AVR_HAVE_EIJMP_EICALL__
- __AVR_3_BYTE_PC__
-
The device has the "EIJMP" and "EICALL" instructions.
This is the case for devices with more than 128@tie{}KiB of program memory.
This also means that the program counter
(PC) is 3@tie{}bytes wide.
- __AVR_2_BYTE_PC__
-
The program counter (PC) is 2@tie{}bytes wide. This is the case for devices with up to 128@tie{}KiB of program memory.
- __AVR_HAVE_8BIT_SP__
- __AVR_HAVE_16BIT_SP__
-
The stack pointer (SP) register is treated as 8-bit respectively 16-bit register by the compiler. The definition of these macros is affected by -mtiny-stack.
- __AVR_HAVE_SPH__
- __AVR_SP8__
-
The device has the SPH(high part of stack pointer) special function register or has an 8-bit stack pointer, respectively. The definition of these macros is affected by -mmcu= and in the cases of -mmcu=avr2 and -mmcu=avr25 also by -msp8.
- __AVR_HAVE_RAMPD__
- __AVR_HAVE_RAMPX__
- __AVR_HAVE_RAMPY__
- __AVR_HAVE_RAMPZ__
- The device has the "RAMPD", "RAMPX", "RAMPY", "RAMPZ" special function register, respectively.
- __NO_INTERRUPTS__
- This macro reflects the -mno-interrupts command-line option.
- __AVR_ERRATA_SKIP__
- __AVR_ERRATA_SKIP_JMP_CALL__
-
Some AVRdevices (AT90S8515,ATmega103) must not skip 32-bit instructions because of a hardware erratum. Skip instructions are "SBRS", "SBRC", "SBIS", "SBIC" and "CPSE". The second macro is only defined if "__AVR_HAVE_JMP_CALL__" is also set.
- __AVR_ISA_RMW__
-
The device has Read-Modify-Write instructions (XCH, LAC, LASandLAT).
- __AVR_SFR_OFFSET__=offset
-
Instructions that can address I/O special function registers directly
like "IN", "OUT", "SBI", etc. may use a different
address as if addressed by an instruction to access RAMlike "LD" or "STS". This offset depends on the device architecture and has to be subtracted from theRAMaddress in order to get the respective I/O@tie{}address.
- __WITH_AVRLIBC__
- The compiler is configured to be used together with AVR-Libc. See the --with-avrlibc configure option.
Blackfin Options
- -mcpu=cpu[-sirevision]
-
Specifies the name of the target Blackfin processor. Currently, cpu
can be one of bf512, bf514, bf516, bf518,
bf522, bf523, bf524, bf525, bf526,
bf527, bf531, bf532, bf533,
bf534, bf536, bf537, bf538, bf539,
bf542, bf544, bf547, bf548, bf549,
bf542m, bf544m, bf547m, bf548m, bf549m,
bf561, bf592.
The optional sirevision specifies the silicon revision of the target Blackfin processor. Any workarounds available for the targeted silicon revision are enabled. If sirevision is none, no workarounds are enabled. If sirevision is any, all workarounds for the targeted processor are enabled. The "__SILICON_REVISION__" macro is defined to two hexadecimal digits representing the major and minor numbers in the silicon revision. If sirevision is none, the "__SILICON_REVISION__" is not defined. If sirevision is any, the "__SILICON_REVISION__" is defined to be 0xffff. If this optional sirevision is not used,
GCCassumes the latest known silicon revision of the targeted Blackfin processor.GCCdefines a preprocessor macro for the specified cpu. For the bfin-elf toolchain, this option causes the hardwareBSPprovided by libgloss to be linked in if -msim is not given.Without this option, bf532 is used as the processor by default.
Note that support for bf561 is incomplete. For bf561, only the preprocessor macro is defined.
- -msim
-
Specifies that the program will be run on the simulator. This causes
the simulator BSPprovided by libgloss to be linked in. This option has effect only for bfin-elf toolchain. Certain other options, such as -mid-shared-library and -mfdpic, imply -msim.
- -momit-leaf-frame-pointer
- Don't keep the frame pointer in a register for leaf functions. This avoids the instructions to save, set up and restore frame pointers and makes an extra register available in leaf functions. The option -fomit-frame-pointer removes the frame pointer for all functions, which might make debugging harder.
- -mspecld-anomaly
- When enabled, the compiler ensures that the generated code does not contain speculative loads after jump instructions. If this option is used, "__WORKAROUND_SPECULATIVE_LOADS" is defined.
- -mno-specld-anomaly
- Don't generate extra code to prevent speculative loads from occurring.
- -mcsync-anomaly
-
When enabled, the compiler ensures that the generated code does not
contain CSYNCorSSYNCinstructions too soon after conditional branches. If this option is used, "__WORKAROUND_SPECULATIVE_SYNCS" is defined.
- -mno-csync-anomaly
-
Don't generate extra code to prevent CSYNCorSSYNCinstructions from occurring too soon after a conditional branch.
- -mlow-64k
- When enabled, the compiler is free to take advantage of the knowledge that the entire program fits into the low 64k of memory.
- -mno-low-64k
- Assume that the program is arbitrarily large. This is the default.
- -mstack-check-l1
- Do stack checking using information placed into L1 scratchpad memory by the uClinux kernel.
- -mid-shared-library
-
Generate code that supports shared libraries via the library IDmethod. This allows for execute in place and shared libraries in an environment without virtual memory management. This option implies -fPIC. With a bfin-elf target, this option implies -msim.
- -mno-id-shared-library
- Generate code that doesn't assume ID-based shared libraries are being used. This is the default.
- -mleaf-id-shared-library
-
Generate code that supports shared libraries via the library IDmethod, but assumes that this library or executable won't link against any otherIDshared libraries. That allows the compiler to use faster code for jumps and calls.
- -mno-leaf-id-shared-library
-
Do not assume that the code being compiled won't link against any IDshared libraries. Slower code is generated for jump and call insns.
- -mshared-library-id=n
- Specifies the identification number of the ID-based shared library being compiled. Specifying a value of 0 generates more compact code; specifying other values forces the allocation of that number to the current library but is no more space- or time-efficient than omitting this option.
- -msep-data
- Generate code that allows the data segment to be located in a different area of memory from the text segment. This allows for execute in place in an environment without virtual memory management by eliminating relocations against the text section.
- -mno-sep-data
- Generate code that assumes that the data segment follows the text segment. This is the default.
- -mlong-calls
- -mno-long-calls
-
Tells the compiler to perform function calls by first loading the
address of the function into a register and then performing a subroutine
call on this register. This switch is needed if the target function
lies outside of the 24-bit addressing range of the offset-based
version of subroutine call instruction.
This feature is not enabled by default. Specifying -mno-long-calls restores the default behavior. Note these switches have no effect on how the compiler generates code to handle function calls via function pointers.
- -mfast-fp
-
Link with the fast floating-point library. This library relaxes some of
the IEEEfloating-point standard's rules for checking inputs against Not-a-Number (NAN), in the interest of performance.
- -minline-plt
-
Enable inlining of PLTentries in function calls to functions that are not known to bind locally. It has no effect without -mfdpic.
- -mmulticore
-
Build a standalone application for multicore Blackfin processors.
This option causes proper start files and link scripts supporting
multicore to be used, and defines the macro "__BFIN_MULTICORE".
It can only be used with -mcpu=bf561[-sirevision].
This option can be used with -mcorea or -mcoreb, which selects the one-application-per-core programming model. Without -mcorea or -mcoreb, the single-application/dual-core programming model is used. In this model, the main function of Core B should be named as "coreb_main".
If this option is not used, the single-core application programming model is used.
- -mcorea
-
Build a standalone application for Core A of BF561when using the one-application-per-core programming model. Proper start files and link scripts are used to support Core A, and the macro "__BFIN_COREA" is defined. This option can only be used in conjunction with -mmulticore.
- -mcoreb
-
Build a standalone application for Core B of BF561when using the one-application-per-core programming model. Proper start files and link scripts are used to support Core B, and the macro "__BFIN_COREB" is defined. When this option is used, "coreb_main" should be used instead of "main". This option can only be used in conjunction with -mmulticore.
- -msdram
-
Build a standalone application for SDRAM.Proper start files and link scripts are used to put the application intoSDRAM,and the macro "__BFIN_SDRAM" is defined. The loader should initializeSDRAMbefore loading the application.
- -micplb
- Assume that ICPLBs are enabled at run time. This has an effect on certain anomaly workarounds. For Linux targets, the default is to assume ICPLBs are enabled; for standalone applications the default is off.
C6X Options
- -march=name
-
This specifies the name of the target architecture. GCCuses this name to determine what kind of instructions it can emit when generating assembly code. Permissible names are: c62x, c64x, c64x+, c67x, c67x+, c674x.
- -mbig-endian
- Generate code for a big-endian target.
- -mlittle-endian
- Generate code for a little-endian target. This is the default.
- -msim
- Choose startup files and linker script suitable for the simulator.
- -msdata=default
- Put small global and static data in the ".neardata" section, which is pointed to by register "B14". Put small uninitialized global and static data in the ".bss" section, which is adjacent to the ".neardata" section. Put small read-only data into the ".rodata" section. The corresponding sections used for large pieces of data are ".fardata", ".far" and ".const".
- -msdata=all
- Put all data, not just small objects, into the sections reserved for small data, and use addressing relative to the "B14" register to access them.
- -msdata=none
- Make no use of the sections reserved for small data, and use absolute addresses to access all data. Put all initialized global and static data in the ".fardata" section, and all uninitialized data in the ".far" section. Put all constant data into the ".const" section.
These options are defined specifically for the
- -march=architecture-type
- -mcpu=architecture-type
-
Generate code for the specified architecture. The choices for
architecture-type are v3, v8 and v10 for
respectively ETRAX4,ETRAX100, andETRAX100LX.Default is v0 except for cris-axis-linux-gnu, where the default is v10.
- -mtune=architecture-type
-
Tune to architecture-type everything applicable about the generated
code, except for the ABIand the set of available instructions. The choices for architecture-type are the same as for -march=architecture-type.
- -mmax-stack-frame=n
- Warn when the stack frame of a function exceeds n bytes.
- -metrax4
- -metrax100
- The options -metrax4 and -metrax100 are synonyms for -march=v3 and -march=v8 respectively.
- -mmul-bug-workaround
- -mno-mul-bug-workaround
-
Work around a bug in the "muls" and "mulu" instructions for CPUmodels where it applies. This option is active by default.
- -mpdebug
- Enable CRIS-specific verbose debug-related information in the assembly code. This option also has the effect of turning off the #NO_APP formatted-code indicator to the assembler at the beginning of the assembly file.
- -mcc-init
- Do not use condition-code results from previous instruction; always emit compare and test instructions before use of condition codes.
- -mno-side-effects
- Do not emit instructions with side effects in addressing modes other than post-increment.
- -mstack-align
- -mno-stack-align
- -mdata-align
- -mno-data-align
- -mconst-align
- -mno-const-align
-
These options (no- options) arrange (eliminate arrangements) for the
stack frame, individual data and constants to be aligned for the maximum
single data access size for the chosen CPUmodel. The default is to arrange for 32-bit alignment.ABIdetails such as structure layout are not affected by these options.
- -m32-bit
- -m16-bit
- -m8-bit
- Similar to the stack- data- and const-align options above, these options arrange for stack frame, writable data and constants to all be 32-bit, 16-bit or 8-bit aligned. The default is 32-bit alignment.
- -mno-prologue-epilogue
- -mprologue-epilogue
- With -mno-prologue-epilogue, the normal function prologue and epilogue which set up the stack frame are omitted and no return instructions or return sequences are generated in the code. Use this option only together with visual inspection of the compiled code: no warnings or errors are generated when call-saved registers must be saved, or storage for local variables needs to be allocated.
- -mno-gotplt
- -mgotplt
-
With -fpic and -fPIC, don't generate (do generate)
instruction sequences that load addresses for functions from the PLTpart of theGOTrather than (traditional on other architectures) calls to thePLT.The default is -mgotplt.
- -melf
- Legacy no-op option only recognized with the cris-axis-elf and cris-axis-linux-gnu targets.
- -mlinux
- Legacy no-op option only recognized with the cris-axis-linux-gnu target.
- -sim
- This option, recognized for the cris-axis-elf, arranges to link with input-output functions from a simulator library. Code, initialized data and zero-initialized data are allocated consecutively.
- -sim2
- Like -sim, but pass linker options to locate initialized data at 0x40000000 and zero-initialized data at 0x80000000.
These options are defined specifically for the
- -mmac
- Enable the use of multiply-accumulate instructions. Disabled by default.
- -mcr16cplus
- -mcr16c
-
Generate code for CR16CorCR16C+architecture.CR16C+architecture is default.
- -msim
-
Links the library libsim.a which is in compatible with simulator. Applicable
to ELFcompiler only.
- -mint32
- Choose integer type as 32-bit wide.
- -mbit-ops
- Generates "sbit"/"cbit" instructions for bit manipulations.
- -mdata-model=model
-
Choose a data model. The choices for model are near,
far or medium. medium is default.
However, far is not valid with -mcr16c, as the
CR16Carchitecture does not support the far data model.
Darwin Options
These options are defined for all architectures running the Darwin operating system.
The subtype of the file created (like ppc7400 or ppc970 or i686) is determined by the flags that specify the
The Darwin tools vary in their behavior when presented with an
- -Fdir
-
Add the framework directory dir to the head of the list of
directories to be searched for header files. These directories are
interleaved with those specified by -I options and are
scanned in a left-to-right order.
A framework directory is a directory with frameworks in it. A framework is a directory with a Headers and/or PrivateHeaders directory contained directly in it that ends in .framework. The name of a framework is the name of this directory excluding the .framework. Headers associated with the framework are found in one of those two directories, with Headers being searched first. A subframework is a framework directory that is in a framework's Frameworks directory. Includes of subframework headers can only appear in a header of a framework that contains the subframework, or in a sibling subframework header. Two subframeworks are siblings if they occur in the same framework. A subframework should not have the same name as a framework; a warning is issued if this is violated. Currently a subframework cannot have subframeworks; in the future, the mechanism may be extended to support this. The standard frameworks can be found in /System/Library/Frameworks and /Library/Frameworks. An example include looks like "#include <Framework/header.h>", where Framework denotes the name of the framework and header.h is found in the PrivateHeaders or Headers directory.
- -iframeworkdir
- Like -F except the directory is a treated as a system directory. The main difference between this -iframework and -F is that with -iframework the compiler does not warn about constructs contained within header files found via dir. This option is valid only for the C family of languages.
- -gused
-
Emit debugging information for symbols that are used. For stabs
debugging format, this enables -feliminate-unused-debug-symbols.
This is by default ON.
- -gfull
- Emit debugging information for all symbols and types.
- -mmacosx-version-min=version
-
The earliest version of MacOS X that this executable will run on
is version. Typical values of version include 10.1,
10.2, and 10.3.9.
If the compiler was built to use the system's headers by default, then the default for this option is the system version on which the compiler is running, otherwise the default is to make choices that are compatible with as many systems and code bases as possible.
- -mkernel
- Enable kernel development mode. The -mkernel option sets -static, -fno-common, -fno-use-cxa-atexit, -fno-exceptions, -fno-non-call-exceptions, -fapple-kext, -fno-weak and -fno-rtti where applicable. This mode also sets -mno-altivec, -msoft-float, -fno-builtin and -mlong-branch for PowerPC targets.
- -mone-byte-bool
-
Override the defaults for "bool" so that "sizeof(bool)==1".
By default "sizeof(bool)" is 4 when compiling for
Darwin/PowerPC and 1 when compiling for Darwin/x86, so this
option has no effect on x86.
Warning: The -mone-byte-bool switch causes
GCCto generate code that is not binary compatible with code generated without that switch. Using this switch may require recompiling all other modules in a program, including system libraries. Use this switch to conform to a non-default data model. - -mfix-and-continue
- -ffix-and-continue
- -findirect-data
-
Generate code suitable for fast turnaround development, such as to
allow GDBto dynamically load .o files into already-running programs. -findirect-data and -ffix-and-continue are provided for backwards compatibility.
- -all_load
- Loads all members of static archive libraries. See man ld(1) for more information.
- -arch_errors_fatal
- Cause the errors having to do with files that have the wrong architecture to be fatal.
- -bind_at_load
- Causes the output file to be marked such that the dynamic linker will bind all undefined references when the file is loaded or launched.
- -bundle
- Produce a Mach-o bundle format file. See man ld(1) for more information.
- -bundle_loader executable
- This option specifies the executable that will load the build output file being linked. See man ld(1) for more information.
- -dynamiclib
-
When passed this option, GCCproduces a dynamic library instead of an executable when linking, using the Darwin libtool command.
- -force_cpusubtype_ALL
-
This causes GCC's output file to have theALLsubtype, instead of one controlled by the -mcpu or -march option.
- -allowable_client client_name
- -client_name
- -compatibility_version
- -current_version
- -dead_strip
- -dependency-file
- -dylib_file
- -dylinker_install_name
- -dynamic
- -exported_symbols_list
- -filelist
- -flat_namespace
- -force_flat_namespace
- -headerpad_max_install_names
- -image_base
- -init
- -install_name
- -keep_private_externs
- -multi_module
- -multiply_defined
- -multiply_defined_unused
- -noall_load
- -no_dead_strip_inits_and_terms
- -nofixprebinding
- -nomultidefs
- -noprebind
- -noseglinkedit
- -pagezero_size
- -prebind
- -prebind_all_twolevel_modules
- -private_bundle
- -read_only_relocs
- -sectalign
- -sectobjectsymbols
- -whyload
- -seg1addr
- -sectcreate
- -sectobjectsymbols
- -sectorder
- -segaddr
- -segs_read_only_addr
- -segs_read_write_addr
- -seg_addr_table
- -seg_addr_table_filename
- -seglinkedit
- -segprot
- -segs_read_only_addr
- -segs_read_write_addr
- -single_module
- -static
- -sub_library
- -sub_umbrella
- -twolevel_namespace
- -umbrella
- -undefined
- -unexported_symbols_list
- -weak_reference_mismatches
- -whatsloaded
- These options are passed to the Darwin linker. The Darwin linker man page describes them in detail.
These -m options are defined for the
- -mno-soft-float
- -msoft-float
-
Use (do not use) the hardware floating-point instructions for
floating-point operations. When -msoft-float is specified,
functions in libgcc.a are used to perform floating-point
operations. Unless they are replaced by routines that emulate the
floating-point operations, or compiled in such a way as to call such
emulations routines, these routines issue floating-point
operations. If you are compiling for an Alpha without floating-point
operations, you must ensure that the library is built so as not to call
them.
Note that Alpha implementations without floating-point operations are required to have floating-point registers.
- -mfp-reg
- -mno-fp-regs
-
Generate code that uses (does not use) the floating-point register set.
-mno-fp-regs implies -msoft-float. If the floating-point
register set is not used, floating-point operands are passed in integer
registers as if they were integers and floating-point results are passed
in $0 instead of $f0. This is a non-standard calling sequence,
so any function with a floating-point argument or return value called by code
compiled with -mno-fp-regs must also be compiled with that
option.
A typical use of this option is building a kernel that does not use, and hence need not save and restore, any floating-point registers.
- -mieee
-
The Alpha architecture implements floating-point hardware optimized for
maximum performance. It is mostly compliant with the IEEEfloating-point standard. However, for full compliance, software assistance is required. This option generates code fully IEEE-compliant code except that the inexact-flag is not maintained (see below). If this option is turned on, the preprocessor macro "_IEEE_FP" is defined during compilation. The resulting code is less efficient but is able to correctly support denormalized numbers and exceptionalIEEEvalues such as not-a-number and plus/minus infinity. Other Alpha compilers call this option -ieee_with_no_inexact.
- -mieee-with-inexact
-
This is like -mieee except the generated code also maintains
the IEEEinexact-flag. Turning on this option causes the generated code to implement fully-compliantIEEEmath. In addition to "_IEEE_FP", "_IEEE_FP_EXACT" is defined as a preprocessor macro. On some Alpha implementations the resulting code may execute significantly slower than the code generated by default. Since there is very little code that depends on the inexact-flag, you should normally not specify this option. Other Alpha compilers call this option -ieee_with_inexact.
- -mfp-trap-mode=trap-mode
-
This option controls what floating-point related traps are enabled.
Other Alpha compilers call this option -fptm trap-mode.
The trap mode can be set to one of four values:
-
- n
- This is the default (normal) setting. The only traps that are enabled are the ones that cannot be disabled in software (e.g., division by zero trap).
- u
- In addition to the traps enabled by n, underflow traps are enabled as well.
- su
- Like u, but the instructions are marked to be safe for software completion (see Alpha architecture manual for details).
- sui
- Like su, but inexact traps are enabled as well.
-
- -mfp-rounding-mode=rounding-mode
-
Selects the IEEErounding mode. Other Alpha compilers call this option -fprm rounding-mode. The rounding-mode can be one of:
-
- n
-
Normal IEEErounding mode. Floating-point numbers are rounded towards the nearest machine number or towards the even machine number in case of a tie.
- m
- Round towards minus infinity.
- c
- Chopped rounding mode. Floating-point numbers are rounded towards zero.
- d
- Dynamic rounding mode. A field in the floating-point control register (fpcr, see Alpha architecture reference manual) controls the rounding mode in effect. The C library initializes this register for rounding towards plus infinity. Thus, unless your program modifies the fpcr, d corresponds to round towards plus infinity.
-
- -mtrap-precision=trap-precision
-
In the Alpha architecture, floating-point traps are imprecise. This
means without software assistance it is impossible to recover from a
floating trap and program execution normally needs to be terminated.
GCCcan generate code that can assist operating system trap handlers in determining the exact location that caused a floating-point trap. Depending on the requirements of an application, different levels of precisions can be selected:
-
- p
- Program precision. This option is the default and means a trap handler can only identify which program caused a floating-point exception.
- f
- Function precision. The trap handler can determine the function that caused a floating-point exception.
- i
- Instruction precision. The trap handler can determine the exact instruction that caused a floating-point exception.
-
Other Alpha compilers provide the equivalent options called -scope_safe and -resumption_safe.
-
- -mieee-conformant
-
This option marks the generated code as IEEEconformant. You must not use this option unless you also specify -mtrap-precision=i and either -mfp-trap-mode=su or -mfp-trap-mode=sui. Its only effect is to emit the line .eflag 48 in the function prologue of the generated assembly file.
- -mbuild-constants
-
Normally GCCexamines a 32- or 64-bit integer constant to see if it can construct it from smaller constants in two or three instructions. If it cannot, it outputs the constant as a literal and generates code to load it from the data segment at run time.
Use this option to require
GCCto construct all integer constants using code, even if it takes more instructions (the maximum is six).You typically use this option to build a shared library dynamic loader. Itself a shared library, it must relocate itself in memory before it can find the variables and constants in its own data segment.
- -mbwx
- -mno-bwx
- -mcix
- -mno-cix
- -mfix
- -mno-fix
- -mmax
- -mno-max
-
Indicate whether GCCshould generate code to use the optionalBWX, CIX, FIXandMAXinstruction sets. The default is to use the instruction sets supported by theCPUtype specified via -mcpu= option or that of theCPUon whichGCCwas built if none is specified.
- -mfloat-vax
- -mfloat-ieee
-
Generate code that uses (does not use) VAX Fand G floating-point arithmetic instead ofIEEEsingle and double precision.
- -mexplicit-relocs
- -mno-explicit-relocs
-
Older Alpha assemblers provided no way to generate symbol relocations
except via assembler macros. Use of these macros does not allow
optimal instruction scheduling. GNUbinutils as of version 2.12 supports a new syntax that allows the compiler to explicitly mark which relocations should apply to which instructions. This option is mostly useful for debugging, asGCCdetects the capabilities of the assembler when it is built and sets the default accordingly.
- -msmall-data
- -mlarge-data
-
When -mexplicit-relocs is in effect, static data is
accessed via gp-relative relocations. When -msmall-data
is used, objects 8 bytes long or smaller are placed in a small data area
(the ".sdata" and ".sbss" sections) and are accessed via
16-bit relocations off of the $gp register. This limits the
size of the small data area to 64KB, but allows the variables to be
directly accessed via a single instruction.
The default is -mlarge-data. With this option the data area is limited to just below 2GB. Programs that require more than 2GB of data must use "malloc" or "mmap" to allocate the data in the heap instead of in the program's data segment.
When generating code for shared libraries, -fpic implies -msmall-data and -fPIC implies -mlarge-data.
- -msmall-text
- -mlarge-text
-
When -msmall-text is used, the compiler assumes that the
code of the entire program (or shared library) fits in 4MB, and is
thus reachable with a branch instruction. When -msmall-data
is used, the compiler can assume that all local symbols share the
same $gp value, and thus reduce the number of instructions
required for a function call from 4 to 1.
The default is -mlarge-text.
- -mcpu=cpu_type
-
Set the instruction set and instruction scheduling parameters for
machine type cpu_type. You can specify either the EVstyle name or the corresponding chip number.GCCsupports scheduling parameters for theEV4, EV5andEV6family of processors and chooses the default values for the instruction set from the processor you specify. If you do not specify a processor type,GCCdefaults to the processor on which the compiler was built.
Supported values for cpu_type are
-
- ev4
- ev45
- 21064
-
Schedules as an EV4and has no instruction set extensions.
- ev5
- 21164
-
Schedules as an EV5and has no instruction set extensions.
- ev56
- 21164a
-
Schedules as an EV5and supports theBWXextension.
- pca56
- 21164pc
- 21164PC
-
Schedules as an EV5and supports theBWXandMAXextensions.
- ev6
- 21264
-
Schedules as an EV6and supports theBWX, FIX,andMAXextensions.
- ev67
- 21264a
-
Schedules as an EV6and supports theBWX, CIX, FIX,andMAXextensions.
-
Native toolchains also support the value native, which selects the best architecture option for the host processor. -mcpu=native has no effect if
GCCdoes not recognize the processor.
-
- -mtune=cpu_type
-
Set only the instruction scheduling parameters for machine type
cpu_type. The instruction set is not changed.
Native toolchains also support the value native, which selects the best architecture option for the host processor. -mtune=native has no effect if
GCCdoes not recognize the processor. - -mmemory-latency=time
-
Sets the latency the scheduler should assume for typical memory
references as seen by the application. This number is highly
dependent on the memory access patterns used by the application
and the size of the external cache on the machine.
Valid options for time are
-
- number
- A decimal number representing clock cycles.
- L1
- L2
- L3
- main
-
The compiler contains estimates of the number of clock cycles for
``typical'' EV4 & EV5hardware for the Level 1, 2 & 3 caches (also called Dcache, Scache, and Bcache), as well as to main memory. Note that L3 is only valid forEV5.
-
These options are defined specifically for the
- -msmall-model
- Use the small address space model. This can produce smaller code, but it does assume that all symbolic values and addresses fit into a 20-bit range.
- -mno-lsim
- Assume that runtime support has been provided and so there is no need to include the simulator library (libsim.a) on the linker command line.
These options are defined specifically for the
- -msim
- Specifies that the program will be run on the simulator. This causes an alternate runtime startup and library to be linked. You must not use this option when generating programs that will run on real hardware; you must provide your own runtime library for whatever I/O functions are needed.
- -mlra
-
Enable Local Register Allocation. This is still experimental for FT32,so by default the compiler uses standard reload.
- -mnodiv
- Do not use div and mod instructions.
- -mgpr-32
- Only use the first 32 general-purpose registers.
- -mgpr-64
- Use all 64 general-purpose registers.
- -mfpr-32
- Use only the first 32 floating-point registers.
- -mfpr-64
- Use all 64 floating-point registers.
- -mhard-float
- Use hardware instructions for floating-point operations.
- -msoft-float
- Use library routines for floating-point operations.
- -malloc-cc
- Dynamically allocate condition code registers.
- -mfixed-cc
- Do not try to dynamically allocate condition code registers, only use "icc0" and "fcc0".
- -mdword
-
Change ABIto use double word insns.
- -mno-dword
- Do not use double word instructions.
- -mdouble
- Use floating-point double instructions.
- -mno-double
- Do not use floating-point double instructions.
- -mmedia
- Use media instructions.
- -mno-media
- Do not use media instructions.
- -mmuladd
- Use multiply and add/subtract instructions.
- -mno-muladd
- Do not use multiply and add/subtract instructions.
- -mfdpic
-
Select the FDPIC ABI,which uses function descriptors to represent pointers to functions. Without any PIC/PIE-related options, it implies -fPIE. With -fpic or -fpie, it assumesGOTentries and small data are within a 12-bit range from theGOTbase address; with -fPIC or -fPIE,GOToffsets are computed with 32 bits. With a bfin-elf target, this option implies -msim.
- -minline-plt
-
Enable inlining of PLTentries in function calls to functions that are not known to bind locally. It has no effect without -mfdpic. It's enabled by default if optimizing for speed and compiling for shared libraries (i.e., -fPIC or -fpic), or when an optimization option such as -O3 or above is present in the command line.
- -mTLS
-
Assume a large TLSsegment when generating thread-local code.
- -mtls
-
Do not assume a large TLSsegment when generating thread-local code.
- -mgprel-ro
-
Enable the use of "GPREL" relocations in the FDPIC ABIfor data that is known to be in read-only sections. It's enabled by default, except for -fpic or -fpie: even though it may help make the global offset table smaller, it trades 1 instruction for 4. With -fPIC or -fPIE, it trades 3 instructions for 4, one of which may be shared by multiple symbols, and it avoids the need for aGOTentry for the referenced symbol, so it's more likely to be a win. If it is not, -mno-gprel-ro can be used to disable it.
- -multilib-library-pic
-
Link with the (library, not FD) pic libraries. It's implied by -mlibrary-pic, as well as by -fPIC and -fpic without -mfdpic. You should never have to use it explicitly.
- -mlinked-fp
-
Follow the EABIrequirement of always creating a frame pointer whenever a stack frame is allocated. This option is enabled by default and can be disabled with -mno-linked-fp.
- -mlong-calls
- Use indirect addressing to call functions outside the current compilation unit. This allows the functions to be placed anywhere within the 32-bit address space.
- -malign-labels
-
Try to align labels to an 8-byte boundary by inserting NOPs into the
previous packet. This option only has an effect when VLIWpacking is enabled. It doesn't create new packets; it merely adds NOPs to existing ones.
- -mlibrary-pic
-
Generate position-independent EABIcode.
- -macc-4
- Use only the first four media accumulator registers.
- -macc-8
- Use all eight media accumulator registers.
- -mpack
-
Pack VLIWinstructions.
- -mno-pack
-
Do not pack VLIWinstructions.
- -mno-eflags
-
Do not mark ABIswitches in e_flags.
- -mcond-move
-
Enable the use of conditional-move instructions (default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-cond-move
-
Disable the use of conditional-move instructions.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mscc
-
Enable the use of conditional set instructions (default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-scc
-
Disable the use of conditional set instructions.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mcond-exec
-
Enable the use of conditional execution (default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-cond-exec
-
Disable the use of conditional execution.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mvliw-branch
-
Run a pass to pack branches into VLIWinstructions (default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-vliw-branch
-
Do not run a pass to pack branches into VLIWinstructions.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mmulti-cond-exec
-
Enable optimization of "&&" and "||" in conditional execution
(default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-multi-cond-exec
-
Disable optimization of "&&" and "||" in conditional execution.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mnested-cond-exec
-
Enable nested conditional execution optimizations (default).
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -mno-nested-cond-exec
-
Disable nested conditional execution optimizations.
This switch is mainly for debugging the compiler and will likely be removed in a future version.
- -moptimize-membar
- This switch removes redundant "membar" instructions from the compiler-generated code. It is enabled by default.
- -mno-optimize-membar
- This switch disables the automatic removal of redundant "membar" instructions from the generated code.
- -mtomcat-stats
- Cause gas to print out tomcat statistics.
- -mcpu=cpu
- Select the processor type for which to generate code. Possible values are frv, fr550, tomcat, fr500, fr450, fr405, fr400, fr300 and simple.
GNU/Linux Options
These -m options are defined for GNU/Linux targets:
- -mglibc
-
Use the GNU Clibrary. This is the default except on *-*-linux-*uclibc*, *-*-linux-*musl* and *-*-linux-*android* targets.
- -muclibc
- Use uClibc C library. This is the default on *-*-linux-*uclibc* targets.
- -mmusl
- Use the musl C library. This is the default on *-*-linux-*musl* targets.
- -mbionic
- Use Bionic C library. This is the default on *-*-linux-*android* targets.
- -mandroid
-
Compile code compatible with Android platform. This is the default on
*-*-linux-*android* targets.
When compiling, this option enables -mbionic, -fPIC, -fno-exceptions and -fno-rtti by default. When linking, this option makes the
GCCdriver pass Android-specific options to the linker. Finally, this option causes the preprocessor macro "__ANDROID__" to be defined. - -tno-android-cc
- Disable compilation effects of -mandroid, i.e., do not enable -mbionic, -fPIC, -fno-exceptions and -fno-rtti by default.
- -tno-android-ld
- Disable linking effects of -mandroid, i.e., pass standard Linux linking options to the linker.
H8/300 Options
These -m options are defined for the H8/300 implementations:
- -mrelax
- Shorten some address references at link time, when possible; uses the linker option -relax.
- -mh
- Generate code for the H8/300H.
- -ms
- Generate code for the H8S.
- -mn
- Generate code for the H8S and H8/300H in the normal mode. This switch must be used either with -mh or -ms.
- -ms2600
- Generate code for the H8S/2600. This switch must be used with -ms.
- -mexr
- Extended registers are stored on stack before execution of function with monitor attribute. Default option is -mexr. This option is valid only for H8S targets.
- -mno-exr
- Extended registers are not stored on stack before execution of function with monitor attribute. Default option is -mno-exr. This option is valid only for H8S targets.
- -mint32
- Make "int" data 32 bits by default.
- -malign-300
- On the H8/300H and H8S, use the same alignment rules as for the H8/300. The default for the H8/300H and H8S is to align longs and floats on 4-byte boundaries. -malign-300 causes them to be aligned on 2-byte boundaries. This option has no effect on the H8/300.
These -m options are defined for the
- -march=architecture-type
-
Generate code for the specified architecture. The choices for
architecture-type are 1.0 for PA 1.0,1.1 forPA 1.1,and 2.0 forPA 2.0processors. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper architecture option for your machine. Code compiled for lower numbered architectures runs on higher numbered architectures, but not the other way around.
- -mpa-risc-1-0
- -mpa-risc-1-1
- -mpa-risc-2-0
- Synonyms for -march=1.0, -march=1.1, and -march=2.0 respectively.
- -mcaller-copies
- The caller copies function arguments passed by hidden reference. This option should be used with care as it is not compatible with the default 32-bit runtime. However, only aggregates larger than eight bytes are passed by hidden reference and the option provides better compatibility with OpenMP.
- -mjump-in-delay
- This option is ignored and provided for compatibility purposes only.
- -mdisable-fpregs
- Prevent floating-point registers from being used in any manner. This is necessary for compiling kernels that perform lazy context switching of floating-point registers. If you use this option and attempt to perform floating-point operations, the compiler aborts.
- -mdisable-indexing
-
Prevent the compiler from using indexing address modes. This avoids some
rather obscure problems when compiling MIGgenerated code underMACH.
- -mno-space-regs
-
Generate code that assumes the target has no space registers. This allows
GCCto generate faster indirect calls and use unscaled index address modes.
Such code is suitable for level 0
PAsystems and kernels. - -mfast-indirect-calls
-
Generate code that assumes calls never cross space boundaries. This
allows GCCto emit code that performs faster indirect calls.
This option does not work in the presence of shared libraries or nested functions.
- -mfixed-range=register-range
- Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator cannot use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register ranges can be specified separated by a comma.
- -mlong-load-store
-
Generate 3-instruction load and store sequences as sometimes required by
the HP-UX 10 linker. This is equivalent to the +k option to
the HPcompilers.
- -mportable-runtime
-
Use the portable calling conventions proposed by HPforELFsystems.
- -mgas
-
Enable the use of assembler directives only GASunderstands.
- -mschedule=cpu-type
- Schedule code according to the constraints for the machine type cpu-type. The choices for cpu-type are 700 7100, 7100LC, 7200, 7300 and 8000. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper scheduling option for your machine. The default scheduling is 8000.
- -mlinker-opt
- Enable the optimization pass in the HP-UX linker. Note this makes symbolic debugging impossible. It also triggers a bug in the HP-UX 8 and HP-UX 9 linkers in which they give bogus error messages when linking some programs.
- -msoft-float
-
Generate output containing library calls for floating point.
Warning: the requisite libraries are not available for all HPPAtargets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation.
-msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with
GCC,with -msoft-float in order for this to work. - -msio
-
Generate the predefine, "_SIO", for server IO.The default is -mwsio. This generates the predefines, "__hp9000s700", "__hp9000s700__" and "_WSIO", for workstationIO.These options are available under HP-UX and HI-UX.
- -mgnu-ld
-
Use options specific to GNUld. This passes -shared to ld when building a shared library. It is the default whenGCCis configured, explicitly or implicitly, with theGNUlinker. This option does not affect which ld is called; it only changes what parameters are passed to that ld. The ld that is called is determined by the --with-ld configure option,GCC's program search path, and finally by the user'sPATH. The linker used byGCCcan be printed using which `gcc -print-prog-name=ld`. This option is only available on the 64-bit HP-UXGCC,i.e. configured with hppa*64*-*-hpux*.
- -mhp-ld
-
Use options specific to HPld. This passes -b to ld when building a shared library and passes +Accept TypeMismatch to ld on all links. It is the default whenGCCis configured, explicitly or implicitly, with theHPlinker. This option does not affect which ld is called; it only changes what parameters are passed to that ld. The ld that is called is determined by the --with-ld configure option,GCC's program search path, and finally by the user'sPATH. The linker used byGCCcan be printed using which `gcc -print-prog-name=ld`. This option is only available on the 64-bit HP-UXGCC,i.e. configured with hppa*64*-*-hpux*.
- -mlong-calls
-
Generate code that uses long call sequences. This ensures that a call
is always able to reach linker generated stubs. The default is to generate
long calls only when the distance from the call site to the beginning
of the function or translation unit, as the case may be, exceeds a
predefined limit set by the branch type being used. The limits for
normal calls are 7,600,000 and 240,000 bytes, respectively for the
PA 2.0andPA 1.Xarchitectures. Sibcalls are always limited at 240,000 bytes.
Distances are measured from the beginning of functions when using the -ffunction-sections option, or when using the -mgas and -mno-portable-runtime options together under HP-UX with the
SOMlinker.It is normally not desirable to use this option as it degrades performance. However, it may be useful in large applications, particularly when partial linking is used to build the application.
The types of long calls used depends on the capabilities of the assembler and linker, and the type of code being generated. The impact on systems that support long absolute calls, and long pic symbol-difference or pc-relative calls should be relatively small. However, an indirect call is used on 32-bit
ELFsystems in pic code and it is quite long. - -munix=unix-std
-
Generate compiler predefines and select a startfile for the specified
UNIXstandard. The choices for unix-std are 93, 95 and 98. 93 is supported on all HP-UX versions. 95 is available on HP-UX 10.10 and later. 98 is available on HP-UX 11.11 and later. The default values are 93 for HP-UX 10.00, 95 for HP-UX 10.10 though to 11.00, and 98 for HP-UX 11.11 and later.
-munix=93 provides the same predefines as
GCC 3.3and 3.4. -munix=95 provides additional predefines for "XOPEN_UNIX" and "_XOPEN_SOURCE_EXTENDED", and the startfile unix95.o. -munix=98 provides additional predefines for "_XOPEN_UNIX", "_XOPEN_SOURCE_EXTENDED", "_INCLUDE__STDC_A1_SOURCE" and "_INCLUDE_XOPEN_SOURCE_500", and the startfile unix98.o.It is important to note that this option changes the interfaces for various library routines. It also affects the operational behavior of the C library. Thus, extreme care is needed in using this option.
Library code that is intended to operate with more than one
UNIXstandard must test, set and restore the variable "__xpg4_extended_mask" as appropriate. MostGNUsoftware doesn't provide this capability. - -nolibdld
- Suppress the generation of link options to search libdld.sl when the -static option is specified on HP-UX 10 and later.
- -static
-
The HP-UX implementation of setlocale in libc has a dependency on
libdld.sl. There isn't an archive version of libdld.sl. Thus,
when the -static option is specified, special link options
are needed to resolve this dependency.
On HP-UX 10 and later, the
GCCdriver adds the necessary options to link with libdld.sl when the -static option is specified. This causes the resulting binary to be dynamic. On the 64-bit port, the linkers generate dynamic binaries by default in any case. The -nolibdld option can be used to prevent theGCCdriver from adding these link options. - -threads
- Add support for multithreading with the dce thread library under HP-UX. This option sets flags for both the preprocessor and linker.
These are the -m options defined for the Intel
- -mbig-endian
- Generate code for a big-endian target. This is the default for HP-UX.
- -mlittle-endian
-
Generate code for a little-endian target. This is the default for AIX5and GNU/Linux.
- -mgnu-as
- -mno-gnu-as
-
Generate (or don't) code for the GNUassembler. This is the default.
- -mgnu-ld
- -mno-gnu-ld
-
Generate (or don't) code for the GNUlinker. This is the default.
- -mno-pic
-
Generate code that does not use a global pointer register. The result
is not position independent code, and violates the IA-64 ABI.
- -mvolatile-asm-stop
- -mno-volatile-asm-stop
- Generate (or don't) a stop bit immediately before and after volatile asm statements.
- -mregister-names
- -mno-register-names
- Generate (or don't) in, loc, and out register names for the stacked registers. This may make assembler output more readable.
- -mno-sdata
- -msdata
- Disable (or enable) optimizations that use the small data section. This may be useful for working around optimizer bugs.
- -mconstant-gp
- Generate code that uses a single constant global pointer value. This is useful when compiling kernel code.
- -mauto-pic
- Generate code that is self-relocatable. This implies -mconstant-gp. This is useful when compiling firmware code.
- -minline-float-divide-min-latency
- Generate code for inline divides of floating-point values using the minimum latency algorithm.
- -minline-float-divide-max-throughput
- Generate code for inline divides of floating-point values using the maximum throughput algorithm.
- -mno-inline-float-divide
- Do not generate inline code for divides of floating-point values.
- -minline-int-divide-min-latency
- Generate code for inline divides of integer values using the minimum latency algorithm.
- -minline-int-divide-max-throughput
- Generate code for inline divides of integer values using the maximum throughput algorithm.
- -mno-inline-int-divide
- Do not generate inline code for divides of integer values.
- -minline-sqrt-min-latency
- Generate code for inline square roots using the minimum latency algorithm.
- -minline-sqrt-max-throughput
- Generate code for inline square roots using the maximum throughput algorithm.
- -mno-inline-sqrt
- Do not generate inline code for "sqrt".
- -mfused-madd
- -mno-fused-madd
- Do (don't) generate code that uses the fused multiply/add or multiply/subtract instructions. The default is to use these instructions.
- -mno-dwarf2-asm
- -mdwarf2-asm
-
Don't (or do) generate assembler code for the DWARFline number debugging info. This may be useful when not using theGNUassembler.
- -mearly-stop-bits
- -mno-early-stop-bits
- Allow stop bits to be placed earlier than immediately preceding the instruction that triggered the stop bit. This can improve instruction scheduling, but does not always do so.
- -mfixed-range=register-range
- Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator cannot use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register ranges can be specified separated by a comma.
- -mtls-size=tls-size
-
Specify bit size of immediate TLSoffsets. Valid values are 14, 22, and 64.
- -mtune=cpu-type
-
Tune the instruction scheduling for a particular CPU,Valid values are itanium, itanium1, merced, itanium2, and mckinley.
- -milp32
- -mlp64
- Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long and pointer to 32 bits. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits. These are HP-UX specific flags.
- -mno-sched-br-data-spec
- -msched-br-data-spec
- (Dis/En)able data speculative scheduling before reload. This results in generation of "ld.a" instructions and the corresponding check instructions ("ld.c" / "chk.a"). The default setting is disabled.
- -msched-ar-data-spec
- -mno-sched-ar-data-spec
- (En/Dis)able data speculative scheduling after reload. This results in generation of "ld.a" instructions and the corresponding check instructions ("ld.c" / "chk.a"). The default setting is enabled.
- -mno-sched-control-spec
- -msched-control-spec
- (Dis/En)able control speculative scheduling. This feature is available only during region scheduling (i.e. before reload). This results in generation of the "ld.s" instructions and the corresponding check instructions "chk.s". The default setting is disabled.
- -msched-br-in-data-spec
- -mno-sched-br-in-data-spec
- (En/Dis)able speculative scheduling of the instructions that are dependent on the data speculative loads before reload. This is effective only with -msched-br-data-spec enabled. The default setting is enabled.
- -msched-ar-in-data-spec
- -mno-sched-ar-in-data-spec
- (En/Dis)able speculative scheduling of the instructions that are dependent on the data speculative loads after reload. This is effective only with -msched-ar-data-spec enabled. The default setting is enabled.
- -msched-in-control-spec
- -mno-sched-in-control-spec
- (En/Dis)able speculative scheduling of the instructions that are dependent on the control speculative loads. This is effective only with -msched-control-spec enabled. The default setting is enabled.
- -mno-sched-prefer-non-data-spec-insns
- -msched-prefer-non-data-spec-insns
- If enabled, data-speculative instructions are chosen for schedule only if there are no other choices at the moment. This makes the use of the data speculation much more conservative. The default setting is disabled.
- -mno-sched-prefer-non-control-spec-insns
- -msched-prefer-non-control-spec-insns
- If enabled, control-speculative instructions are chosen for schedule only if there are no other choices at the moment. This makes the use of the control speculation much more conservative. The default setting is disabled.
- -mno-sched-count-spec-in-critical-path
- -msched-count-spec-in-critical-path
- If enabled, speculative dependencies are considered during computation of the instructions priorities. This makes the use of the speculation a bit more conservative. The default setting is disabled.
- -msched-spec-ldc
- Use a simple data speculation check. This option is on by default.
- -msched-control-spec-ldc
- Use a simple check for control speculation. This option is on by default.
- -msched-stop-bits-after-every-cycle
- Place a stop bit after every cycle when scheduling. This option is on by default.
- -msched-fp-mem-deps-zero-cost
- Assume that floating-point stores and loads are not likely to cause a conflict when placed into the same instruction group. This option is disabled by default.
- -msel-sched-dont-check-control-spec
- Generate checks for control speculation in selective scheduling. This flag is disabled by default.
- -msched-max-memory-insns=max-insns
- Limit on the number of memory insns per instruction group, giving lower priority to subsequent memory insns attempting to schedule in the same instruction group. Frequently useful to prevent cache bank conflicts. The default value is 1.
- -msched-max-memory-insns-hard-limit
- Makes the limit specified by msched-max-memory-insns a hard limit, disallowing more than that number in an instruction group. Otherwise, the limit is ``soft'', meaning that non-memory operations are preferred when the limit is reached, but memory operations may still be scheduled.
These -m options are defined for the LatticeMico32 architecture:
- -mbarrel-shift-enabled
- Enable barrel-shift instructions.
- -mdivide-enabled
- Enable divide and modulus instructions.
- -mmultiply-enabled
- Enable multiply instructions.
- -msign-extend-enabled
- Enable sign extend instructions.
- -muser-enabled
- Enable user-defined instructions.
M32C Options
- -mcpu=name
-
Select the CPUfor which code is generated. name may be one of r8c for the R8C/Tiny series, m16c for the M16C (up to /60) series, m32cm for the M16C/80 series, or m32c for the M32C/80 series.
- -msim
- Specifies that the program will be run on the simulator. This causes an alternate runtime library to be linked in which supports, for example, file I/O. You must not use this option when generating programs that will run on real hardware; you must provide your own runtime library for whatever I/O functions are needed.
- -memregs=number
-
Specifies the number of memory-based pseudo-registers GCCuses during code generation. These pseudo-registers are used like real registers, so there is a tradeoff betweenGCC's ability to fit the code into available registers, and the performance penalty of using memory instead of registers. Note that all modules in a program must be compiled with the same value for this option. Because of that, you must not use this option withGCC's default runtime libraries.
M32R/D Options
These -m options are defined for Renesas M32R/D architectures:
- -m32r2
- Generate code for the M32R/2.
- -m32rx
- Generate code for the M32R/X.
- -m32r
- Generate code for the M32R. This is the default.
- -mmodel=small
-
Assume all objects live in the lower 16MB of memory (so that their addresses
can be loaded with the "ld24" instruction), and assume all subroutines
are reachable with the "bl" instruction.
This is the default.
The addressability of a particular object can be set with the "model" attribute.
- -mmodel=medium
- Assume objects may be anywhere in the 32-bit address space (the compiler generates "seth/add3" instructions to load their addresses), and assume all subroutines are reachable with the "bl" instruction.
- -mmodel=large
- Assume objects may be anywhere in the 32-bit address space (the compiler generates "seth/add3" instructions to load their addresses), and assume subroutines may not be reachable with the "bl" instruction (the compiler generates the much slower "seth/add3/jl" instruction sequence).
- -msdata=none
-
Disable use of the small data area. Variables are put into
one of ".data", ".bss", or ".rodata" (unless the
"section" attribute has been specified).
This is the default.
The small data area consists of sections ".sdata" and ".sbss". Objects may be explicitly put in the small data area with the "section" attribute using one of these sections.
- -msdata=sdata
- Put small global and static data in the small data area, but do not generate special code to reference them.
- -msdata=use
- Put small global and static data in the small data area, and generate special instructions to reference them.
- -G num
-
Put global and static objects less than or equal to num bytes
into the small data or BSSsections instead of the normal data orBSSsections. The default value of num is 8. The -msdata option must be set to one of sdata or use for this option to have any effect.
All modules should be compiled with the same -G num value. Compiling with different values of num may or may not work; if it doesn't the linker gives an error message---incorrect code is not generated.
- -mdebug
- Makes the M32R-specific code in the compiler display some statistics that might help in debugging programs.
- -malign-loops
- Align all loops to a 32-byte boundary.
- -mno-align-loops
- Do not enforce a 32-byte alignment for loops. This is the default.
- -missue-rate=number
- Issue number instructions per cycle. number can only be 1 or 2.
- -mbranch-cost=number
- number can only be 1 or 2. If it is 1 then branches are preferred over conditional code, if it is 2, then the opposite applies.
- -mflush-trap=number
- Specifies the trap number to use to flush the cache. The default is 12. Valid numbers are between 0 and 15 inclusive.
- -mno-flush-trap
- Specifies that the cache cannot be flushed by using a trap.
- -mflush-func=name
- Specifies the name of the operating system function to call to flush the cache. The default is _flush_cache, but a function call is only used if a trap is not available.
- -mno-flush-func
-
Indicates that there is no OSfunction for flushing the cache.
M680x0 Options
These are the -m options defined for M680x0 and ColdFire processors. The default settings depend on which architecture was selected when the compiler was configured; the defaults for the most common choices are given below.
- -march=arch
-
Generate code for a specific M680x0 or ColdFire instruction set
architecture. Permissible values of arch for M680x0
architectures are: 68000, 68010, 68020,
68030, 68040, 68060 and cpu32. ColdFire
architectures are selected according to Freescale's ISAclassification and the permissible values are: isaa, isaaplus, isab and isac.GCCdefines a macro "__mcfarch__" whenever it is generating code for a ColdFire target. The arch in this macro is one of the -march arguments given above.
When used together, -march and -mtune select code that runs on a family of similar processors but that is optimized for a particular microarchitecture.
- -mcpu=cpu
-
Generate code for a specific M680x0 or ColdFire processor.
The M680x0 cpus are: 68000, 68010, 68020,
68030, 68040, 68060, 68302, 68332
and cpu32. The ColdFire cpus are given by the table
below, which also classifies the CPUs into families:
-
- Family : -mcpu arguments
- 51 : 51 51ac 51ag 51cn 51em 51je 51jf 51jg 51jm 51mm 51qe 51qm
- 5206 : 5202 5204 5206
- 5206e : 5206e
- 5208 : 5207 5208
- 5211a : 5210a 5211a
- 5213 : 5211 5212 5213
- 5216 : 5214 5216
- 52235 : 52230 52231 52232 52233 52234 52235
- 5225 : 5224 5225
- 52259 : 52252 52254 52255 52256 52258 52259
- 5235 : 5232 5233 5234 5235 523x
- 5249 : 5249
- 5250 : 5250
- 5271 : 5270 5271
- 5272 : 5272
- 5275 : 5274 5275
- 5282 : 5280 5281 5282 528x
- 53017 : 53011 53012 53013 53014 53015 53016 53017
- 5307 : 5307
- 5329 : 5327 5328 5329 532x
- 5373 : 5372 5373 537x
- 5407 : 5407
- 5475 : 5470 5471 5472 5473 5474 5475 547x 5480 5481 5482 5483 5484 5485
-
-mcpu=cpu overrides -march=arch if arch is compatible with cpu. Other combinations of -mcpu and -march are rejected.
GCCdefines the macro "__mcf_cpu_cpu" when ColdFire target cpu is selected. It also defines "__mcf_family_family", where the value of family is given by the table above.
-
- -mtune=tune
-
Tune the code for a particular microarchitecture within the
constraints set by -march and -mcpu.
The M680x0 microarchitectures are: 68000, 68010,
68020, 68030, 68040, 68060
and cpu32. The ColdFire microarchitectures
are: cfv1, cfv2, cfv3, cfv4 and cfv4e.
You can also use -mtune=68020-40 for code that needs to run relatively well on 68020, 68030 and 68040 targets. -mtune=68020-60 is similar but includes 68060 targets as well. These two options select the same tuning decisions as -m68020-40 and -m68020-60 respectively.
GCCdefines the macros "__mcarch" and "__mcarch__" when tuning for 680x0 architecture arch. It also defines "mcarch" unless either -ansi or a non-GNU -std option is used. IfGCCis tuning for a range of architectures, as selected by -mtune=68020-40 or -mtune=68020-60, it defines the macros for every architecture in the range.GCCalso defines the macro "__muarch__" when tuning for ColdFire microarchitecture uarch, where uarch is one of the arguments given above. - -m68000
- -mc68000
-
Generate output for a 68000. This is the default
when the compiler is configured for 68000-based systems.
It is equivalent to -march=68000.
Use this option for microcontrollers with a 68000 or
EC000core, including the 68008, 68302, 68306, 68307, 68322, 68328 and 68356. - -m68010
- Generate output for a 68010. This is the default when the compiler is configured for 68010-based systems. It is equivalent to -march=68010.
- -m68020
- -mc68020
- Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems. It is equivalent to -march=68020.
- -m68030
- Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems. It is equivalent to -march=68030.
- -m68040
-
Generate output for a 68040. This is the default when the compiler is
configured for 68040-based systems. It is equivalent to
-march=68040.
This option inhibits the use of 68881/68882 instructions that have to be emulated by software on the 68040. Use this option if your 68040 does not have code to emulate those instructions.
- -m68060
-
Generate output for a 68060. This is the default when the compiler is
configured for 68060-based systems. It is equivalent to
-march=68060.
This option inhibits the use of 68020 and 68881/68882 instructions that have to be emulated by software on the 68060. Use this option if your 68060 does not have code to emulate those instructions.
- -mcpu32
-
Generate output for a CPU32.This is the default when the compiler is configured for CPU32-based systems. It is equivalent to -march=cpu32.
Use this option for microcontrollers with a
CPU32orCPU32+core, including the 68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349 and 68360. - -m5200
-
Generate output for a 520X ColdFire CPU.This is the default when the compiler is configured for 520X-based systems. It is equivalent to -mcpu=5206, and is now deprecated in favor of that option.
Use this option for microcontroller with a 5200 core, including the
MCF5202, MCF5203, MCF5204andMCF5206. - -m5206e
-
Generate output for a 5206e ColdFire CPU.The option is now deprecated in favor of the equivalent -mcpu=5206e.
- -m528x
- Generate output for a member of the ColdFire 528X family. The option is now deprecated in favor of the equivalent -mcpu=528x.
- -m5307
-
Generate output for a ColdFire 5307 CPU.The option is now deprecated in favor of the equivalent -mcpu=5307.
- -m5407
-
Generate output for a ColdFire 5407 CPU.The option is now deprecated in favor of the equivalent -mcpu=5407.
- -mcfv4e
-
Generate output for a ColdFire V4e family CPU(e.g. 547x/548x). This includes use of hardware floating-point instructions. The option is equivalent to -mcpu=547x, and is now deprecated in favor of that option.
- -m68020-40
-
Generate output for a 68040, without using any of the new instructions.
This results in code that can run relatively efficiently on either a
68020/68881 or a 68030 or a 68040. The generated code does use the
68881 instructions that are emulated on the 68040.
The option is equivalent to -march=68020 -mtune=68020-40.
- -m68020-60
-
Generate output for a 68060, without using any of the new instructions.
This results in code that can run relatively efficiently on either a
68020/68881 or a 68030 or a 68040. The generated code does use the
68881 instructions that are emulated on the 68060.
The option is equivalent to -march=68020 -mtune=68020-60.
- -mhard-float
- -m68881
-
Generate floating-point instructions. This is the default for 68020
and above, and for ColdFire devices that have an FPU.It defines the macro "__HAVE_68881__" on M680x0 targets and "__mcffpu__" on ColdFire targets.
- -msoft-float
-
Do not generate floating-point instructions; use library calls instead.
This is the default for 68000, 68010, and 68832 targets. It is also
the default for ColdFire devices that have no FPU.
- -mdiv
- -mno-div
-
Generate (do not generate) ColdFire hardware divide and remainder
instructions. If -march is used without -mcpu,
the default is ``on'' for ColdFire architectures and ``off'' for M680x0
architectures. Otherwise, the default is taken from the target CPU(either the defaultCPU,or the one specified by -mcpu). For example, the default is ``off'' for -mcpu=5206 and ``on'' for -mcpu=5206e.GCCdefines the macro "__mcfhwdiv__" when this option is enabled.
- -mshort
-
Consider type "int" to be 16 bits wide, like "short int".
Additionally, parameters passed on the stack are also aligned to a
16-bit boundary even on targets whose APImandates promotion to 32-bit.
- -mno-short
- Do not consider type "int" to be 16 bits wide. This is the default.
- -mnobitfield
- -mno-bitfield
- Do not use the bit-field instructions. The -m68000, -mcpu32 and -m5200 options imply -mnobitfield.
- -mbitfield
- Do use the bit-field instructions. The -m68020 option implies -mbitfield. This is the default if you use a configuration designed for a 68020.
- -mrtd
-
Use a different function-calling convention, in which functions
that take a fixed number of arguments return with the "rtd"
instruction, which pops their arguments while returning. This
saves one instruction in the caller since there is no need to pop
the arguments there.
This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler.
Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code is generated for calls to those functions.
In addition, seriously incorrect code results if you call a function with too many arguments. (Normally, extra arguments are harmlessly ignored.)
The "rtd" instruction is supported by the 68010, 68020, 68030, 68040, 68060 and
CPU32processors, but not by the 68000 or 5200. - -mno-rtd
- Do not use the calling conventions selected by -mrtd. This is the default.
- -malign-int
- -mno-align-int
-
Control whether GCCaligns "int", "long", "long long", "float", "double", and "long double" variables on a 32-bit boundary (-malign-int) or a 16-bit boundary (-mno-align-int). Aligning variables on 32-bit boundaries produces code that runs somewhat faster on processors with 32-bit busses at the expense of more memory.
Warning: if you use the -malign-int switch,
GCCaligns structures containing the above types differently than most published application binary interface specifications for the m68k. - -mpcrel
- Use the pc-relative addressing mode of the 68000 directly, instead of using a global offset table. At present, this option implies -fpic, allowing at most a 16-bit offset for pc-relative addressing. -fPIC is not presently supported with -mpcrel, though this could be supported for 68020 and higher processors.
- -mno-strict-align
- -mstrict-align
- Do not (do) assume that unaligned memory references are handled by the system.
- -msep-data
- Generate code that allows the data segment to be located in a different area of memory from the text segment. This allows for execute-in-place in an environment without virtual memory management. This option implies -fPIC.
- -mno-sep-data
- Generate code that assumes that the data segment follows the text segment. This is the default.
- -mid-shared-library
-
Generate code that supports shared libraries via the library IDmethod. This allows for execute-in-place and shared libraries in an environment without virtual memory management. This option implies -fPIC.
- -mno-id-shared-library
- Generate code that doesn't assume ID-based shared libraries are being used. This is the default.
- -mshared-library-id=n
- Specifies the identification number of the ID-based shared library being compiled. Specifying a value of 0 generates more compact code; specifying other values forces the allocation of that number to the current library, but is no more space- or time-efficient than omitting this option.
- -mxgot
- -mno-xgot
-
When generating position-independent code for ColdFire, generate code
that works if the GOThas more than 8192 entries. This code is larger and slower than code generated without this option. On M680x0 processors, this option is not needed; -fPIC suffices.GCCnormally uses a single instruction to load values from theGOT.While this is relatively efficient, it only works if theGOTis smaller than about 64k. Anything larger causes the linker to report an error such as:
relocation truncated to fit: R_68K_GOT16O foobar
If this happens, you should recompile your code with -mxgot. It should then work with very large GOTs. However, code generated with -mxgot is less efficient, since it takes 4 instructions to fetch the value of a global symbol.
Note that some linkers, including newer versions of the
GNUlinker, can create multiple GOTs and sortGOTentries. If you have such a linker, you should only need to use -mxgot when compiling a single object file that accesses more than 8192GOTentries. Very few do.These options have no effect unless
GCCis generating position-independent code. - -mlong-jump-table-offsets
- Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets.
MCore Options
These are the -m options defined for the Motorola M*Core processors.
- -mhardlit
- -mno-hardlit
- Inline constants into the code stream if it can be done in two instructions or less.
- -mdiv
- -mno-div
- Use the divide instruction. (Enabled by default).
- -mrelax-immediate
- -mno-relax-immediate
- Allow arbitrary-sized immediates in bit operations.
- -mwide-bitfields
- -mno-wide-bitfields
- Always treat bit-fields as "int"-sized.
- -m4byte-functions
- -mno-4byte-functions
- Force all functions to be aligned to a 4-byte boundary.
- -mcallgraph-data
- -mno-callgraph-data
- Emit callgraph information.
- -mslow-bytes
- -mno-slow-bytes
- Prefer word access when reading byte quantities.
- -mlittle-endian
- -mbig-endian
- Generate code for a little-endian target.
- -m210
- -m340
- Generate code for the 210 processor.
- -mno-lsim
- Assume that runtime support has been provided and so omit the simulator library (libsim.a) from the linker command line.
- -mstack-increment=size
- Set the maximum amount for a single stack increment operation. Large values can increase the speed of programs that contain functions that need a large amount of stack space, but they can also trigger a segmentation fault if the stack is extended too much. The default value is 0x1000.
MeP Options
- -mabsdiff
- Enables the "abs" instruction, which is the absolute difference between two registers.
- -mall-opts
- Enables all the optional instructions---average, multiply, divide, bit operations, leading zero, absolute difference, min/max, clip, and saturation.
- -maverage
- Enables the "ave" instruction, which computes the average of two registers.
- -mbased=n
- Variables of size n bytes or smaller are placed in the ".based" section by default. Based variables use the $tp register as a base register, and there is a 128-byte limit to the ".based" section.
- -mbitops
- Enables the bit operation instructions---bit test ("btstm"), set ("bsetm"), clear ("bclrm"), invert ("bnotm"), and test-and-set ("tas").
- -mc=name
- Selects which section constant data is placed in. name may be tiny, near, or far.
- -mclip
- Enables the "clip" instruction. Note that -mclip is not useful unless you also provide -mminmax.
- -mconfig=name
-
Selects one of the built-in core configurations. Each MeP chip has
one or more modules in it; each module has a core CPUand a variety of coprocessors, optional instructions, and peripherals. The "MeP-Integrator" tool, not part ofGCC,provides these configurations through this option; using this option is the same as using all the corresponding command-line options. The default configuration is default.
- -mcop
- Enables the coprocessor instructions. By default, this is a 32-bit coprocessor. Note that the coprocessor is normally enabled via the -mconfig= option.
- -mcop32
- Enables the 32-bit coprocessor's instructions.
- -mcop64
- Enables the 64-bit coprocessor's instructions.
- -mivc2
-
Enables IVC2scheduling.IVC2is a 64-bitVLIWcoprocessor.
- -mdc
- Causes constant variables to be placed in the ".near" section.
- -mdiv
- Enables the "div" and "divu" instructions.
- -meb
- Generate big-endian code.
- -mel
- Generate little-endian code.
- -mio-volatile
- Tells the compiler that any variable marked with the "io" attribute is to be considered volatile.
- -ml
- Causes variables to be assigned to the ".far" section by default.
- -mleadz
- Enables the "leadz" (leading zero) instruction.
- -mm
- Causes variables to be assigned to the ".near" section by default.
- -mminmax
- Enables the "min" and "max" instructions.
- -mmult
- Enables the multiplication and multiply-accumulate instructions.
- -mno-opts
- Disables all the optional instructions enabled by -mall-opts.
- -mrepeat
- Enables the "repeat" and "erepeat" instructions, used for low-overhead looping.
- -ms
- Causes all variables to default to the ".tiny" section. Note that there is a 65536-byte limit to this section. Accesses to these variables use the %gp base register.
- -msatur
- Enables the saturation instructions. Note that the compiler does not currently generate these itself, but this option is included for compatibility with other tools, like "as".
- -msdram
- Link the SDRAM-based runtime instead of the default ROM-based runtime.
- -msim
- Link the simulator run-time libraries.
- -msimnovec
- Link the simulator runtime libraries, excluding built-in support for reset and exception vectors and tables.
- -mtf
- Causes all functions to default to the ".far" section. Without this option, functions default to the ".near" section.
- -mtiny=n
- Variables that are n bytes or smaller are allocated to the ".tiny" section. These variables use the $gp base register. The default for this option is 4, but note that there's a 65536-byte limit to the ".tiny" section.
MicroBlaze Options
- -msoft-float
- Use software emulation for floating point (default).
- -mhard-float
- Use hardware floating-point instructions.
- -mmemcpy
- Do not optimize block moves, use "memcpy".
- -mno-clearbss
- This option is deprecated. Use -fno-zero-initialized-in-bss instead.
- -mcpu=cpu-type
-
Use features of, and schedule code for, the given CPU.Supported values are in the format vX.YY.Z, where X is a major version,YYis the minor version, and Z is compatibility code. Example values are v3.00.a, v4.00.b, v5.00.a, v5.00.b, v5.00.b, v6.00.a.
- -mxl-soft-mul
- Use software multiply emulation (default).
- -mxl-soft-div
- Use software emulation for divides (default).
- -mxl-barrel-shift
- Use the hardware barrel shifter.
- -mxl-pattern-compare
- Use pattern compare instructions.
- -msmall-divides
- Use table lookup optimization for small signed integer divisions.
- -mxl-stack-check
- This option is deprecated. Use -fstack-check instead.
- -mxl-gp-opt
- Use GP-relative ".sdata"/".sbss" sections.
- -mxl-multiply-high
- Use multiply high instructions for high part of 32x32 multiply.
- -mxl-float-convert
- Use hardware floating-point conversion instructions.
- -mxl-float-sqrt
- Use hardware floating-point square root instruction.
- -mbig-endian
- Generate code for a big-endian target.
- -mlittle-endian
- Generate code for a little-endian target.
- -mxl-reorder
- Use reorder instructions (swap and byte reversed load/store).
- -mxl-mode-app-model
-
Select application model app-model. Valid models are
-
- executable
- normal executable (default), uses startup code crt0.o.
- xmdstub
-
for use with Xilinx Microprocessor Debugger (XMD) based software intrusive debug agent called xmdstub. This uses startup file crt1.o and sets the start address of the program to 0x800.
- bootstrap
- for applications that are loaded using a bootloader. This model uses startup file crt2.o which does not contain a processor reset vector handler. This is suitable for transferring control on a processor reset to the bootloader rather than the application.
- novectors
- for applications that do not require any of the MicroBlaze vectors. This option may be useful for applications running within a monitoring application. This model uses crt3.o as a startup file.
-
Option -xl-mode-app-model is a deprecated alias for -mxl-mode-app-model.
-
- -EB
- Generate big-endian code.
- -EL
- Generate little-endian code. This is the default for mips*el-*-* configurations.
- -march=arch
-
Generate code that runs on arch, which can be the name of a
generic MIPS ISA,or the name of a particular processor. TheISAnames are: mips1, mips2, mips3, mips4, mips32, mips32r2, mips32r3, mips32r5, mips32r6, mips64, mips64r2, mips64r3, mips64r5 and mips64r6. The processor names are: 4kc, 4km, 4kp, 4ksc, 4kec, 4kem, 4kep, 4ksd, 5kc, 5kf, 20kc, 24kc, 24kf2_1, 24kf1_1, 24kec, 24kef2_1, 24kef1_1, 34kc, 34kf2_1, 34kf1_1, 34kn, 74kc, 74kf2_1, 74kf1_1, 74kf3_2, 1004kc, 1004kf2_1, 1004kf1_1, i6400, interaptiv, loongson2e, loongson2f, loongson3a, m4k, m14k, m14kc, m14ke, m14kec, m5100, m5101, octeon, octeon+, octeon2, octeon3, orion, p5600, r2000, r3000, r3900, r4000, r4400, r4600, r4650, r4700, r6000, r8000, rm7000, rm9000, r10000, r12000, r14000, r16000, sb1, sr71000, vr4100, vr4111, vr4120, vr4130, vr4300, vr5000, vr5400, vr5500, xlr and xlp. The special value from-abi selects the most compatible architecture for the selectedABI(that is, mips1 for 32-bit ABIs and mips3 for 64-bit ABIs).
The native Linux/GNU toolchain also supports the value native, which selects the best architecture option for the host processor. -march=native has no effect if
GCCdoes not recognize the processor.In processor names, a final 000 can be abbreviated as k (for example, -march=r2k). Prefixes are optional, and vr may be written r.
Names of the form nf2_1 refer to processors with FPUs clocked at half the rate of the core, names of the form nf1_1 refer to processors with FPUs clocked at the same rate as the core, and names of the form nf3_2 refer to processors with FPUs clocked a ratio of 3:2 with respect to the core. For compatibility reasons, nf is accepted as a synonym for nf2_1 while nx and bfx are accepted as synonyms for nf1_1.
GCCdefines two macros based on the value of this option. The first is "_MIPS_ARCH", which gives the name of target architecture, as a string. The second has the form "_MIPS_ARCH_foo", where foo is the capitalized value of "_MIPS_ARCH". For example, -march=r2000 sets "_MIPS_ARCH" to "r2000" and defines the macro "_MIPS_ARCH_R2000".Note that the "_MIPS_ARCH" macro uses the processor names given above. In other words, it has the full prefix and does not abbreviate 000 as k. In the case of from-abi, the macro names the resolved architecture (either "mips1" or "mips3"). It names the default architecture when no -march option is given.
- -mtune=arch
-
Optimize for arch. Among other things, this option controls
the way instructions are scheduled, and the perceived cost of arithmetic
operations. The list of arch values is the same as for
-march.
When this option is not used,
GCCoptimizes for the processor specified by -march. By using -march and -mtune together, it is possible to generate code that runs on a family of processors, but optimize the code for one particular member of that family.-mtune defines the macros "_MIPS_TUNE" and "_MIPS_TUNE_foo", which work in the same way as the -march ones described above.
- -mips1
- Equivalent to -march=mips1.
- -mips2
- Equivalent to -march=mips2.
- -mips3
- Equivalent to -march=mips3.
- -mips4
- Equivalent to -march=mips4.
- -mips32
- Equivalent to -march=mips32.
- -mips32r3
- Equivalent to -march=mips32r3.
- -mips32r5
- Equivalent to -march=mips32r5.
- -mips32r6
- Equivalent to -march=mips32r6.
- -mips64
- Equivalent to -march=mips64.
- -mips64r2
- Equivalent to -march=mips64r2.
- -mips64r3
- Equivalent to -march=mips64r3.
- -mips64r5
- Equivalent to -march=mips64r5.
- -mips64r6
- Equivalent to -march=mips64r6.
- -mips16
- -mno-mips16
-
Generate (do not generate) MIPS16code. IfGCCis targeting aMIPS32orMIPS64architecture, it makes use of the MIPS16eASE.MIPS16code generation can also be controlled on a per-function basis by means of "mips16" and "nomips16" attributes.
- -mflip-mips16
-
Generate MIPS16code on alternating functions. This option is provided for regression testing of mixed MIPS16/non-MIPS16 code generation, and is not intended for ordinary use in compiling user code.
- -minterlink-compressed
- -mno-interlink-compressed
-
Require (do not require) that code using the standard (uncompressed) MIPS ISAbe link-compatible withMIPS16and microMIPS code, and vice versa.
For example, code using the standard
ISAencoding cannot jump directly toMIPS16or microMIPS code; it must either use a call or an indirect jump. -minterlink-compressed therefore disables direct jumps unlessGCCknows that the target of the jump is not compressed. - -minterlink-mips16
- -mno-interlink-mips16
-
Aliases of -minterlink-compressed and
-mno-interlink-compressed. These options predate the microMIPS ASEand are retained for backwards compatibility.
- -mabi=32
- -mabi=o64
- -mabi=n32
- -mabi=64
- -mabi=eabi
-
Generate code for the given ABI.
Note that the
EABIhas a 32-bit and a 64-bit variant.GCCnormally generates 64-bit code when you select a 64-bit architecture, but you can use -mgp32 to get 32-bit code instead.For information about the O64
ABI,see <gcc.gnu.org/projects/mipso64-abi.html>.GCCsupports a variant of the o32ABIin which floating-point registers are 64 rather than 32 bits wide. You can select this combination with -mabi=32 -mfp64. ThisABIrelies on the "mthc1" and "mfhc1" instructions and is therefore only supported forMIPS32R2, MIPS32R3andMIPS32R5processors.The register assignments for arguments and return values remain the same, but each scalar value is passed in a single 64-bit register rather than a pair of 32-bit registers. For example, scalar floating-point values are returned in $f0 only, not a $f0/$f1 pair. The set of call-saved registers also remains the same in that the even-numbered double-precision registers are saved.
Two additional variants of the o32
ABIare supported to enable a transition from 32-bit to 64-bit registers. These areFPXX(-mfpxx) andFP64A(-mfp64 -mno-odd-spreg). TheFPXXextension mandates that all code must execute correctly when run using 32-bit or 64-bit registers. The code can be interlinked with eitherFP32orFP64,but not both. TheFP64Aextension is similar to theFP64extension but forbids the use of odd-numbered single-precision registers. This can be used in conjunction with the "FRE" mode of FPUs inMIPS32R5processors and allows bothFP32andFP64Acode to interlink and run in the same process without changingFPUmodes. - -mabicalls
- -mno-abicalls
- Generate (do not generate) code that is suitable for SVR4-style dynamic objects. -mabicalls is the default for SVR4-based systems.
- -mshared
- -mno-shared
-
Generate (do not generate) code that is fully position-independent,
and that can therefore be linked into shared libraries. This option
only affects -mabicalls.
All -mabicalls code has traditionally been position-independent, regardless of options like -fPIC and -fpic. However, as an extension, the
GNUtoolchain allows executables to use absolute accesses for locally-binding symbols. It can also use shorterGPinitialization sequences and generate direct calls to locally-defined functions. This mode is selected by -mno-shared.-mno-shared depends on binutils 2.16 or higher and generates objects that can only be linked by the
GNUlinker. However, the option does not affect theABIof the final executable; it only affects theABIof relocatable objects. Using -mno-shared generally makes executables both smaller and quicker.-mshared is the default.
- -mplt
- -mno-plt
-
Assume (do not assume) that the static and dynamic linkers
support PLTs and copy relocations. This option only affects
-mno-shared -mabicalls. For the n64 ABI,this option has no effect without -msym32.
You can make -mplt the default by configuring
GCCwith --with-mips-plt. The default is -mno-plt otherwise. - -mxgot
- -mno-xgot
-
Lift (do not lift) the usual restrictions on the size of the global
offset table.
GCCnormally uses a single instruction to load values from theGOT.While this is relatively efficient, it only works if theGOTis smaller than about 64k. Anything larger causes the linker to report an error such as:
relocation truncated to fit: R_MIPS_GOT16 foobar
If this happens, you should recompile your code with -mxgot. This works with very large GOTs, although the code is also less efficient, since it takes three instructions to fetch the value of a global symbol.
Note that some linkers can create multiple GOTs. If you have such a linker, you should only need to use -mxgot when a single object file accesses more than 64k's worth of
GOTentries. Very few do.These options have no effect unless
GCCis generating position independent code. - -mgp32
- Assume that general-purpose registers are 32 bits wide.
- -mgp64
- Assume that general-purpose registers are 64 bits wide.
- -mfp32
- Assume that floating-point registers are 32 bits wide.
- -mfp64
- Assume that floating-point registers are 64 bits wide.
- -mfpxx
- Do not assume the width of floating-point registers.
- -mhard-float
- Use floating-point coprocessor instructions.
- -msoft-float
- Do not use floating-point coprocessor instructions. Implement floating-point calculations using library calls instead.
- -mno-float
-
Equivalent to -msoft-float, but additionally asserts that the
program being compiled does not perform any floating-point operations.
This option is presently supported only by some bare-metal MIPSconfigurations, where it may select a special set of libraries that lack all floating-point support (including, for example, the floating-point "printf" formats). If code compiled with -mno-float accidentally contains floating-point operations, it is likely to suffer a link-time or run-time failure.
- -msingle-float
- Assume that the floating-point coprocessor only supports single-precision operations.
- -mdouble-float
- Assume that the floating-point coprocessor supports double-precision operations. This is the default.
- -modd-spreg
- -mno-odd-spreg
-
Enable the use of odd-numbered single-precision floating-point registers
for the o32 ABI.This is the default for processors that are known to support these registers. When using the o32FPXX ABI,-mno-odd-spreg is set by default.
- -mabs=2008
- -mabs=legacy
-
These options control the treatment of the special not-a-number (NaN)
IEEE 754floating-point data with the "abs.fmt" and "neg.fmt" machine instructions.
By default or when -mabs=legacy is used the legacy treatment is selected. In this case these instructions are considered arithmetic and avoided where correct operation is required and the input operand might be a NaN. A longer sequence of instructions that manipulate the sign bit of floating-point datum manually is used instead unless the -ffinite-math-only option has also been specified.
The -mabs=2008 option selects the
IEEE 754-2008treatment. In this case these instructions are considered non-arithmetic and therefore operating correctly in all cases, including in particular where the input operand is a NaN. These instructions are therefore always used for the respective operations. - -mnan=2008
- -mnan=legacy
-
These options control the encoding of the special not-a-number (NaN)
IEEE 754floating-point data.
The -mnan=legacy option selects the legacy encoding. In this case quiet NaNs (qNaNs) are denoted by the first bit of their trailing significand field being 0, whereas signaling NaNs (sNaNs) are denoted by the first bit of their trailing significand field being 1.
The -mnan=2008 option selects the
IEEE 754-2008encoding. In this case qNaNs are denoted by the first bit of their trailing significand field being 1, whereas sNaNs are denoted by the first bit of their trailing significand field being 0.The default is -mnan=legacy unless
GCChas been configured with --with-nan=2008. - -mllsc
- -mno-llsc
-
Use (do not use) ll, sc, and sync instructions to
implement atomic memory built-in functions. When neither option is
specified, GCCuses the instructions if the target architecture supports them.
-mllsc is useful if the runtime environment can emulate the instructions and -mno-llsc can be useful when compiling for nonstandard ISAs. You can make either option the default by configuring
GCCwith --with-llsc and --without-llsc respectively. --with-llsc is the default for some configurations; see the installation documentation for details. - -mdsp
- -mno-dsp
-
Use (do not use) revision 1 of the MIPS DSP ASE.
This option defines the preprocessor macro "__mips_dsp". It also defines "__mips_dsp_rev" to 1. - -mdspr2
- -mno-dspr2
-
Use (do not use) revision 2 of the MIPS DSP ASE.
This option defines the preprocessor macros "__mips_dsp" and "__mips_dspr2". It also defines "__mips_dsp_rev" to 2. - -msmartmips
- -mno-smartmips
-
Use (do not use) the MIPSSmartMIPSASE.
- -mpaired-single
- -mno-paired-single
-
Use (do not use) paired-single floating-point instructions.
This option requires hardware floating-point support to be enabled. - -mdmx
- -mno-mdmx
-
Use (do not use) MIPSDigital Media Extension instructions. This option can only be used when generating 64-bit code and requires hardware floating-point support to be enabled.
- -mips3d
- -mno-mips3d
-
Use (do not use) the MIPS-3D ASE.The option -mips3d implies -mpaired-single.
- -mmicromips
- -mno-micromips
-
Generate (do not generate) microMIPS code.
MicroMIPS code generation can also be controlled on a per-function basis by means of "micromips" and "nomicromips" attributes.
- -mmt
- -mno-mt
-
Use (do not use) MTMultithreading instructions.
- -mmcu
- -mno-mcu
-
Use (do not use) the MIPS MCU ASEinstructions.
- -meva
- -mno-eva
-
Use (do not use) the MIPSEnhanced Virtual Addressing instructions.
- -mvirt
- -mno-virt
-
Use (do not use) the MIPSVirtualization (VZ) instructions.
- -mxpa
- -mno-xpa
-
Use (do not use) the MIPSeXtended Physical Address (XPA) instructions.
- -mlong64
- Force "long" types to be 64 bits wide. See -mlong32 for an explanation of the default and the way that the pointer size is determined.
- -mlong32
-
Force "long", "int", and pointer types to be 32 bits wide.
The default size of "int"s, "long"s and pointers depends on the
ABI.All the supported ABIs use 32-bit "int"s. The n64ABIuses 64-bit "long"s, as does the 64-bitEABI; the others use 32-bit "long"s. Pointers are the same size as "long"s, or the same size as integer registers, whichever is smaller. - -msym32
- -mno-sym32
-
Assume (do not assume) that all symbols have 32-bit values, regardless
of the selected ABI.This option is useful in combination with -mabi=64 and -mno-abicalls because it allowsGCCto generate shorter and faster references to symbolic addresses.
- -G num
-
Put definitions of externally-visible data in a small data section
if that data is no bigger than num bytes. GCCcan then generate more efficient accesses to the data; see -mgpopt for details.
The default -G option depends on the configuration.
- -mlocal-sdata
- -mno-local-sdata
-
Extend (do not extend) the -G behavior to local data too,
such as to static variables in C. -mlocal-sdata is the
default for all configurations.
If the linker complains that an application is using too much small data, you might want to try rebuilding the less performance-critical parts with -mno-local-sdata. You might also want to build large libraries with -mno-local-sdata, so that the libraries leave more room for the main program.
- -mextern-sdata
- -mno-extern-sdata
-
Assume (do not assume) that externally-defined data is in
a small data section if the size of that data is within the -G limit.
-mextern-sdata is the default for all configurations.
If you compile a module Mod with -mextern-sdata -G num -mgpopt, and Mod references a variable Var that is no bigger than num bytes, you must make sure that Var is placed in a small data section. If Var is defined by another module, you must either compile that module with a high-enough -G setting or attach a "section" attribute to Var's definition. If Var is common, you must link the application with a high-enough -G setting.
The easiest way of satisfying these restrictions is to compile and link every module with the same -G option. However, you may wish to build a library that supports several different small data limits. You can do this by compiling the library with the highest supported -G setting and additionally using -mno-extern-sdata to stop the library from making assumptions about externally-defined data.
- -mgpopt
- -mno-gpopt
-
Use (do not use) GP-relative accesses for symbols that are known to be
in a small data section; see -G, -mlocal-sdata and
-mextern-sdata. -mgpopt is the default for all
configurations.
-mno-gpopt is useful for cases where the $gp register might not hold the value of "_gp". For example, if the code is part of a library that might be used in a boot monitor, programs that call boot monitor routines pass an unknown value in $gp. (In such situations, the boot monitor itself is usually compiled with -G0.)
-mno-gpopt implies -mno-local-sdata and -mno-extern-sdata.
- -membedded-data
- -mno-embedded-data
-
Allocate variables to the read-only data section first if possible, then
next in the small data section if possible, otherwise in data. This gives
slightly slower code than the default, but reduces the amount of RAMrequired when executing, and thus may be preferred for some embedded systems.
- -muninit-const-in-rodata
- -mno-uninit-const-in-rodata
- Put uninitialized "const" variables in the read-only data section. This option is only meaningful in conjunction with -membedded-data.
- -mcode-readable=setting
-
Specify whether GCCmay generate code that reads from executable sections. There are three possible settings:
-
- -mcode-readable=yes
- Instructions may freely access executable sections. This is the default setting.
- -mcode-readable=pcrel
-
MIPS16PC-relative load instructions can access executable sections, but other instructions must not do so. This option is useful on 4KSc and 4KSd processors when the code TLBs have the Read Inhibit bit set. It is also useful on processors that can be configured to have a dual instruction/dataSRAMinterface and that, like the M4K, automatically redirect PC-relative loads to the instructionRAM.
- -mcode-readable=no
-
Instructions must not access executable sections. This option can be
useful on targets that are configured to have a dual instruction/data
SRAMinterface but that (unlike the M4K) do not automatically redirect PC-relative loads to the instructionRAM.
-
- -msplit-addresses
- -mno-split-addresses
- Enable (disable) use of the "%hi()" and "%lo()" assembler relocation operators. This option has been superseded by -mexplicit-relocs but is retained for backwards compatibility.
- -mexplicit-relocs
- -mno-explicit-relocs
-
Use (do not use) assembler relocation operators when dealing with symbolic
addresses. The alternative, selected by -mno-explicit-relocs,
is to use assembler macros instead.
-mexplicit-relocs is the default if
GCCwas configured to use an assembler that supports relocation operators. - -mcheck-zero-division
- -mno-check-zero-division
-
Trap (do not trap) on integer division by zero.
The default is -mcheck-zero-division.
- -mdivide-traps
- -mdivide-breaks
-
MIPSsystems check for division by zero by generating either a conditional trap or a break instruction. Using traps results in smaller code, but is only supported onMIPS IIand later. Also, some versions of the Linux kernel have a bug that prevents trap from generating the proper signal ("SIGFPE"). Use -mdivide-traps to allow conditional traps on architectures that support them and -mdivide-breaks to force the use of breaks.
The default is usually -mdivide-traps, but this can be overridden at configure time using --with-divide=breaks. Divide-by-zero checks can be completely disabled using -mno-check-zero-division.
- -mload-store-pairs
- -mno-load-store-pairs
- Enable (disable) an optimization that pairs consecutive load or store instructions to enable load/store bonding. This option is enabled by default but only takes effect when the selected architecture is known to support bonding.
- -mmemcpy
- -mno-memcpy
-
Force (do not force) the use of "memcpy" for non-trivial block
moves. The default is -mno-memcpy, which allows GCCto inline most constant-sized copies.
- -mlong-calls
- -mno-long-calls
-
Disable (do not disable) use of the "jal" instruction. Calling
functions using "jal" is more efficient but requires the caller
and callee to be in the same 256 megabyte segment.
This option has no effect on abicalls code. The default is -mno-long-calls.
- -mmad
- -mno-mad
-
Enable (disable) use of the "mad", "madu" and "mul"
instructions, as provided by the R4650 ISA.
- -mimadd
- -mno-imadd
- Enable (disable) use of the "madd" and "msub" integer instructions. The default is -mimadd on architectures that support "madd" and "msub" except for the 74k architecture where it was found to generate slower code.
- -mfused-madd
- -mno-fused-madd
-
Enable (disable) use of the floating-point multiply-accumulate
instructions, when they are available. The default is
-mfused-madd.
On the R8000
CPUwhen multiply-accumulate instructions are used, the intermediate product is calculated to infinite precision and is not subject to theFCSRFlush to Zero bit. This may be undesirable in some circumstances. On other processors the result is numerically identical to the equivalent computation using separate multiply, add, subtract and negate instructions. - -nocpp
-
Tell the MIPSassembler to not run its preprocessor over user assembler files (with a .s suffix) when assembling them.
- -mfix-24k
- -mno-fix-24k
-
Work around the 24K E48 (lost data on stores during refill) errata.
The workarounds are implemented by the assembler rather than by GCC.
- -mfix-r4000
- -mno-fix-r4000
-
Work around certain R4000 CPUerrata:
-
- -
- A double-word or a variable shift may give an incorrect result if executed immediately after starting an integer division.
- -
- A double-word or a variable shift may give an incorrect result if executed while an integer multiplication is in progress.
- -
- An integer division may give an incorrect result if started in a delay slot of a taken branch or a jump.
-
- -mfix-r4400
- -mno-fix-r4400
-
Work around certain R4400 CPUerrata:
-
- -
- A double-word or a variable shift may give an incorrect result if executed immediately after starting an integer division.
-
- -mfix-r10000
- -mno-fix-r10000
-
Work around certain R10000 errata:
-
- -
- "ll"/"sc" sequences may not behave atomically on revisions prior to 3.0. They may deadlock on revisions 2.6 and earlier.
-
This option can only be used if the target architecture supports branch-likely instructions. -mfix-r10000 is the default when -march=r10000 is used; -mno-fix-r10000 is the default otherwise.
-
- -mfix-rm7000
- -mno-fix-rm7000
-
Work around the RM7000"dmult"/"dmultu" errata. The workarounds are implemented by the assembler rather than byGCC.
- -mfix-vr4120
- -mno-fix-vr4120
-
Work around certain VR4120errata:
-
- -
- "dmultu" does not always produce the correct result.
- -
- "div" and "ddiv" do not always produce the correct result if one of the operands is negative.
-
The workarounds for the division errata rely on special functions in libgcc.a. At present, these functions are only provided by the "mips64vr*-elf" configurations.
Other
VR4120errata require aNOPto be inserted between certain pairs of instructions. These errata are handled by the assembler, not byGCCitself.
-
- -mfix-vr4130
-
Work around the VR4130"mflo"/"mfhi" errata. The workarounds are implemented by the assembler rather than byGCC,althoughGCCavoids using "mflo" and "mfhi" if theVR4130"macc", "macchi", "dmacc" and "dmacchi" instructions are available instead.
- -mfix-sb1
- -mno-fix-sb1
-
Work around certain SB-1 CPUcore errata. (This flag currently works around theSB-1revision 2 ``F1'' and ``F2'' floating-point errata.)
- -mr10k-cache-barrier=setting
-
Specify whether GCCshould insert cache barriers to avoid the side-effects of speculation on R10K processors.
In common with many processors, the R10K tries to predict the outcome of a conditional branch and speculatively executes instructions from the ``taken'' branch. It later aborts these instructions if the predicted outcome is wrong. However, on the R10K, even aborted instructions can have side effects.
This problem only affects kernel stores and, depending on the system, kernel loads. As an example, a speculatively-executed store may load the target memory into cache and mark the cache line as dirty, even if the store itself is later aborted. If a
DMAoperation writes to the same area of memory before the ``dirty'' line is flushed, the cached data overwrites the DMA-ed data. See the R10K processor manual for a full description, including other potential problems.One workaround is to insert cache barrier instructions before every memory access that might be speculatively executed and that might have side effects even if aborted. -mr10k-cache-barrier=setting controls
GCC's implementation of this workaround. It assumes that aborted accesses to any byte in the following regions does not have side effects:-
- 1.
- the memory occupied by the current function's stack frame;
- 2.
- the memory occupied by an incoming stack argument;
- 3.
- the memory occupied by an object with a link-time-constant address.
-
It is the kernel's responsibility to ensure that speculative accesses to these regions are indeed safe.
If the input program contains a function declaration such as:
void foo (void);
then the implementation of "foo" must allow "j foo" and "jal foo" to be executed speculatively.
GCChonors this restriction for functions it compiles itself. It expects non-GCC functions (such as hand-written assembly code) to do the same.The option has three forms:
- -mr10k-cache-barrier=load-store
- Insert a cache barrier before a load or store that might be speculatively executed and that might have side effects even if aborted.
- -mr10k-cache-barrier=store
- Insert a cache barrier before a store that might be speculatively executed and that might have side effects even if aborted.
- -mr10k-cache-barrier=none
- Disable the insertion of cache barriers. This is the default setting.
-
- -mflush-func=func
- -mno-flush-func
-
Specifies the function to call to flush the I and D caches, or to not
call any such function. If called, the function must take the same
arguments as the common "_flush_func", that is, the address of the
memory range for which the cache is being flushed, the size of the
memory range, and the number 3 (to flush both caches). The default
depends on the target GCCwas configured for, but commonly is either "_flush_func" or "__cpu_flush".
- mbranch-cost=num
- Set the cost of branches to roughly num ``simple'' instructions. This cost is only a heuristic and is not guaranteed to produce consistent results across releases. A zero cost redundantly selects the default, which is based on the -mtune setting.
- -mbranch-likely
- -mno-branch-likely
-
Enable or disable use of Branch Likely instructions, regardless of the
default for the selected architecture. By default, Branch Likely
instructions may be generated if they are supported by the selected
architecture. An exception is for the MIPS32andMIPS64architectures and processors that implement those architectures; for those, Branch Likely instructions are not be generated by default because theMIPS32andMIPS64architectures specifically deprecate their use.
- -mcompact-branches=never
- -mcompact-branches=optimal
- -mcompact-branches=always
-
These options control which form of branches will be generated. The
default is -mcompact-branches=optimal.
The -mcompact-branches=never option ensures that compact branch instructions will never be generated.
The -mcompact-branches=always option ensures that a compact branch instruction will be generated if available. If a compact branch instruction is not available, a delay slot form of the branch will be used instead.
This option is supported from
MIPSRelease 6 onwards.The -mcompact-branches=optimal option will cause a delay slot branch to be used if one is available in the current
ISAand the delay slot is successfully filled. If the delay slot is not filled, a compact branch will be chosen if one is available. - -mfp-exceptions
- -mno-fp-exceptions
-
Specifies whether FPexceptions are enabled. This affects howFPinstructions are scheduled for some processors. The default is thatFPexceptions are enabled.
For instance, on the
SB-1,ifFPexceptions are disabled, and we are emitting 64-bit code, then we can use bothFPpipes. Otherwise, we can only use oneFPpipe. - -mvr4130-align
- -mno-vr4130-align
-
The VR4130pipeline is two-way superscalar, but can only issue two instructions together if the first one is 8-byte aligned. When this option is enabled,GCCaligns pairs of instructions that it thinks should execute in parallel.
This option only has an effect when optimizing for the
VR4130.It normally makes code faster, but at the expense of making it bigger. It is enabled by default at optimization level -O3. - -msynci
- -mno-synci
-
Enable (disable) generation of "synci" instructions on
architectures that support it. The "synci" instructions (if
enabled) are generated when "__builtin___clear_cache" is
compiled.
This option defaults to -mno-synci, but the default can be overridden by configuring
GCCwith --with-synci.When compiling code for single processor systems, it is generally safe to use "synci". However, on many multi-core (
SMP) systems, it does not invalidate the instruction caches on all cores and may lead to undefined behavior. - -mrelax-pic-calls
- -mno-relax-pic-calls
-
Try to turn PICcalls that are normally dispatched via register $25 into direct calls. This is only possible if the linker can resolve the destination at link time and if the destination is within range for a direct call.
-mrelax-pic-calls is the default if
GCCwas configured to use an assembler and a linker that support the ".reloc" assembly directive and -mexplicit-relocs is in effect. With -mno-explicit-relocs, this optimization can be performed by the assembler and the linker alone without help from the compiler. - -mmcount-ra-address
- -mno-mcount-ra-address
-
Emit (do not emit) code that allows "_mcount" to modify the
calling function's return address. When enabled, this option extends
the usual "_mcount" interface with a new ra-address
parameter, which has type "intptr_t *" and is passed in register
$12. "_mcount" can then modify the return address by
doing both of the following:
-
- *
- Returning the new address in register $31.
- *
- Storing the new address in "*ra-address", if ra-address is nonnull.
-
The default is -mno-mcount-ra-address.
-
- -mframe-header-opt
- -mno-frame-header-opt
-
Enable (disable) frame header optimization in the o32 ABI.When using the o32ABI,calling functions will allocate 16 bytes on the stack for the called function to write out register arguments. When enabled, this optimization will suppress the allocation of the frame header if it can be determined that it is unused.
This optimization is off by default at all optimization levels.
- -mlxc1-sxc1
- -mno-lxc1-sxc1
- When applicable, enable (disable) the generation of "lwxc1", "swxc1", "ldxc1", "sdxc1" instructions. Enabled by default.
- -mmadd4
- -mno-madd4
- When applicable, enable (disable) the generation of 4-operand "madd.s", "madd.d" and related instructions. Enabled by default.
These options are defined for the
- -mlibfuncs
- -mno-libfuncs
- Specify that intrinsic library functions are being compiled, passing all values in registers, no matter the size.
- -mepsilon
- -mno-epsilon
- Generate floating-point comparison instructions that compare with respect to the "rE" epsilon register.
- -mabi=mmixware
- -mabi=gnu
-
Generate code that passes function parameters and return values that (in
the called function) are seen as registers $0 and up, as opposed to
the GNU ABIwhich uses global registers $231 and up.
- -mzero-extend
- -mno-zero-extend
- When reading data from memory in sizes shorter than 64 bits, use (do not use) zero-extending load instructions by default, rather than sign-extending ones.
- -mknuthdiv
- -mno-knuthdiv
- Make the result of a division yielding a remainder have the same sign as the divisor. With the default, -mno-knuthdiv, the sign of the remainder follows the sign of the dividend. Both methods are arithmetically valid, the latter being almost exclusively used.
- -mtoplevel-symbols
- -mno-toplevel-symbols
- Prepend (do not prepend) a : to all global symbols, so the assembly code can be used with the "PREFIX" assembly directive.
- -melf
-
Generate an executable in the ELFformat, rather than the default mmo format used by the mmix simulator.
- -mbranch-predict
- -mno-branch-predict
- Use (do not use) the probable-branch instructions, when static branch prediction indicates a probable branch.
- -mbase-addresses
- -mno-base-addresses
- Generate (do not generate) code that uses base addresses. Using a base address automatically generates a request (handled by the assembler and the linker) for a constant to be set up in a global register. The register is used for one or more base address requests within the range 0 to 255 from the value held in the register. The generally leads to short and fast code, but the number of different data items that can be addressed is limited. This means that a program that uses lots of static data may require -mno-base-addresses.
- -msingle-exit
- -mno-single-exit
- Force (do not force) generated code to have a single exit point in each function.
These -m options are defined for Matsushita
- -mmult-bug
-
Generate code to avoid bugs in the multiply instructions for the MN10300processors. This is the default.
- -mno-mult-bug
-
Do not generate code to avoid bugs in the multiply instructions for the
MN10300processors.
- -mam33
-
Generate code using features specific to the AM33processor.
- -mno-am33
-
Do not generate code using features specific to the AM33processor. This is the default.
- -mam33-2
-
Generate code using features specific to the AM33/2.0processor.
- -mam34
-
Generate code using features specific to the AM34processor.
- -mtune=cpu-type
-
Use the timing characteristics of the indicated CPUtype when scheduling instructions. This does not change the targeted processor type. TheCPUtype must be one of mn10300, am33, am33-2 or am34.
- -mreturn-pointer-on-d0
- When generating a function that returns a pointer, return the pointer in both "a0" and "d0". Otherwise, the pointer is returned only in "a0", and attempts to call such functions without a prototype result in errors. Note that this option is on by default; use -mno-return-pointer-on-d0 to disable it.
- -mno-crt0
- Do not link in the C run-time initialization object file.
- -mrelax
-
Indicate to the linker that it should perform a relaxation optimization pass
to shorten branches, calls and absolute memory addresses. This option only
has an effect when used on the command line for the final link step.
This option makes symbolic debugging impossible.
- -mliw
-
Allow the compiler to generate Long Instruction Word
instructions if the target is the AM33or later. This is the default. This option defines the preprocessor macro "__LIW__".
- -mnoliw
- Do not allow the compiler to generate Long Instruction Word instructions. This option defines the preprocessor macro "__NO_LIW__".
- -msetlb
-
Allow the compiler to generate the SETLBand Lcc instructions if the target is theAM33or later. This is the default. This option defines the preprocessor macro "__SETLB__".
- -mnosetlb
-
Do not allow the compiler to generate SETLBor Lcc instructions. This option defines the preprocessor macro "__NO_SETLB__".
Moxie Options
- -meb
- Generate big-endian code. This is the default for moxie-*-* configurations.
- -mel
- Generate little-endian code.
- -mmul.x
- Generate mul.x and umul.x instructions. This is the default for moxiebox-*-* configurations.
- -mno-crt0
- Do not link in the C run-time initialization object file.
These options are defined for the
- -masm-hex
- Force assembly output to always use hex constants. Normally such constants are signed decimals, but this option is available for testsuite and/or aesthetic purposes.
- -mmcu=
-
Select the MCUto target. This is used to create a C preprocessor symbol based upon theMCUname, converted to upper case and pre- and post-fixed with __. This in turn is used by the msp430.h header file to select an MCU-specific supplementary header file.
The option also sets the
ISAto use. If theMCUname is one that is known to only support the 430ISAthen that is selected, otherwise the 430XISAis selected. A genericMCUname of msp430 can also be used to select the 430ISA.Similarly the generic msp430xMCUname selects the 430XISA.In addition an MCU-specific linker script is added to the linker command line. The script's name is the name of the
MCUwith .ld appended. Thus specifying -mmcu=xxx on the gcc command line defines the C preprocessor symbol "__XXX__" and cause the linker to search for a script called xxx.ld.This option is also passed on to the assembler.
- -mwarn-mcu
- -mno-warn-mcu
-
This option enables or disables warnings about conflicts between the
MCUname specified by the -mmcu option and theISAset by the -mcpu option and/or the hardware multiply support set by the -mhwmult option. It also toggles warnings about unrecognizedMCUnames. This option is on by default.
- -mcpu=
-
Specifies the ISAto use. Accepted values are msp430, msp430x and msp430xv2. This option is deprecated. The -mmcu= option should be used to select theISA.
- -msim
- Link to the simulator runtime libraries and linker script. Overrides any scripts that would be selected by the -mmcu= option.
- -mlarge
- Use large-model addressing (20-bit pointers, 32-bit "size_t").
- -msmall
- Use small-model addressing (16-bit pointers, 16-bit "size_t").
- -mrelax
- This option is passed to the assembler and linker, and allows the linker to perform certain optimizations that cannot be done until the final link.
- mhwmult=
-
Describes the type of hardware multiply supported by the target.
Accepted values are none for no hardware multiply, 16bit
for the original 16-bit-only multiply supported by early MCUs.
32bit for the 16/32-bit multiply supported by later MCUs and
f5series for the 16/32-bit multiply supported by F5-series MCUs.
A value of auto can also be given. This tells GCCto deduce the hardware multiply support based upon theMCUname provided by the -mmcu option. If no -mmcu option is specified or if theMCUname is not recognized then no hardware multiply support is assumed. "auto" is the default setting.
Hardware multiplies are normally performed by calling a library routine. This saves space in the generated code. When compiling at -O3 or higher however the hardware multiplier is invoked inline. This makes for bigger, but faster code.
The hardware multiply routines disable interrupts whilst running and restore the previous interrupt state when they finish. This makes them safe to use inside interrupt handlers as well as in normal code.
- -minrt
- Enable the use of a minimum runtime environment - no static initializers or constructors. This is intended for memory-constrained devices. The compiler includes special symbols in some objects that tell the linker and runtime which code fragments are required.
- -mcode-region=
- -mdata-region=
- These options tell the compiler where to place functions and data that do not have one of the "lower", "upper", "either" or "section" attributes. Possible values are "lower", "upper", "either" or "any". The first three behave like the corresponding attribute. The fourth possible value - "any" - is the default. It leaves placement entirely up to the linker script and how it assigns the standard sections (".text", ".data", etc) to the memory regions.
- -msilicon-errata=
- This option passes on a request to assembler to enable the fixes for the named silicon errata.
- -msilicon-errata-warn=
- This option passes on a request to the assembler to enable warning messages when a silicon errata might need to be applied.
These options are defined for
- -mbig-endian
- Generate code in big-endian mode.
- -mlittle-endian
- Generate code in little-endian mode.
- -mreduced-regs
- Use reduced-set registers for register allocation.
- -mfull-regs
- Use full-set registers for register allocation.
- -mcmov
- Generate conditional move instructions.
- -mno-cmov
- Do not generate conditional move instructions.
- -mperf-ext
- Generate performance extension instructions.
- -mno-perf-ext
- Do not generate performance extension instructions.
- -mv3push
- Generate v3 push25/pop25 instructions.
- -mno-v3push
- Do not generate v3 push25/pop25 instructions.
- -m16-bit
- Generate 16-bit instructions.
- -mno-16-bit
- Do not generate 16-bit instructions.
- -misr-vector-size=num
- Specify the size of each interrupt vector, which must be 4 or 16.
- -mcache-block-size=num
- Specify the size of each cache block, which must be a power of 2 between 4 and 512.
- -march=arch
- Specify the name of the target architecture.
- -mcmodel=code-model
-
Set the code model to one of
-
- small
- All the data and read-only data segments must be within 512KB addressing space. The text segment must be within 16MB addressing space.
- medium
- The data segment must be within 512KB while the read-only data segment can be within 4GB addressing space. The text segment should be still within 16MB addressing space.
- large
- All the text and data segments can be within 4GB addressing space.
-
- -mctor-dtor
- Enable constructor/destructor feature.
- -mrelax
- Guide linker to relax instructions.
Nios
These are the options defined for the Altera Nios
- -G num
-
Put global and static objects less than or equal to num bytes
into the small data or BSSsections instead of the normal data orBSSsections. The default value of num is 8.
- -mgpopt=option
- -mgpopt
- -mno-gpopt
-
Generate (do not generate) GP-relative accesses. The following
option names are recognized:
-
- none
- Do not generate GP-relative accesses.
- local
- Generate GP-relative accesses for small data objects that are not external, weak, or uninitialized common symbols. Also use GP-relative addressing for objects that have been explicitly placed in a small data section via a "section" attribute.
- global
- As for local, but also generate GP-relative accesses for small data objects that are external, weak, or common. If you use this option, you must ensure that all parts of your program (including libraries) are compiled with the same -G setting.
- data
-
Generate GP-relative accesses for all data objects in the program. If you
use this option, the entire data and BSSsegments of your program must fit in 64K of memory and you must use an appropriate linker script to allocate them within the addressable range of the global pointer.
- all
-
Generate GP-relative addresses for function pointers as well as data
pointers. If you use this option, the entire text, data, and BSSsegments of your program must fit in 64K of memory and you must use an appropriate linker script to allocate them within the addressable range of the global pointer.
-
-mgpopt is equivalent to -mgpopt=local, and -mno-gpopt is equivalent to -mgpopt=none.
The default is -mgpopt except when -fpic or -fPIC is specified to generate position-independent code. Note that the Nios
II ABIdoes not permit GP-relative accesses from shared libraries.You may need to specify -mno-gpopt explicitly when building programs that include large amounts of small data, including large
GOTdata sections. In this case, the 16-bit offset for GP-relative addressing may not be large enough to allow access to the entire small data section.
-
- -mel
- -meb
- Generate little-endian (default) or big-endian (experimental) code, respectively.
- -march=arch
-
This specifies the name of the target Nios IIarchitecture.GCCuses this name to determine what kind of instructions it can emit when generating assembly code. Permissible names are: r1, r2.
The preprocessor macro "__nios2_arch__" is available to programs, with value 1 or 2, indicating the targeted
ISAlevel. - -mbypass-cache
- -mno-bypass-cache
- Force all load and store instructions to always bypass cache by using I/O variants of the instructions. The default is not to bypass the cache.
- -mno-cache-volatile
- -mcache-volatile
- Volatile memory access bypass the cache using the I/O variants of the load and store instructions. The default is not to bypass the cache.
- -mno-fast-sw-div
- -mfast-sw-div
- Do not use table-based fast divide for small numbers. The default is to use the fast divide at -O3 and above.
- -mno-hw-mul
- -mhw-mul
- -mno-hw-mulx
- -mhw-mulx
- -mno-hw-div
- -mhw-div
- Enable or disable emitting "mul", "mulx" and "div" family of instructions by the compiler. The default is to emit "mul" and not emit "div" and "mulx".
- -mbmx
- -mno-bmx
- -mcdx
- -mno-cdx
-
Enable or disable generation of Nios II R2 BMX(bit manipulation) andCDX(code density) instructions. Enabling these instructions also requires -march=r2. Since these instructions are optional extensions to the R2 architecture, the default is not to emit them.
- -mcustom-insn=N
- -mno-custom-insn
-
Each -mcustom-insn=N option enables use of a
custom instruction with encoding N when generating code that uses
insn. For example, -mcustom-fadds=253 generates custom
instruction 253 for single-precision floating-point add operations instead
of the default behavior of using a library call.
The following values of insn are supported. Except as otherwise noted, floating-point operations are expected to be implemented with normal
IEEE 754semantics and correspond directly to the C operators or the equivalentGCCbuilt-in functions.Single-precision floating point:
-
- fadds, fsubs, fdivs, fmuls
- Binary arithmetic operations.
- fnegs
- Unary negation.
- fabss
- Unary absolute value.
- fcmpeqs, fcmpges, fcmpgts, fcmples, fcmplts, fcmpnes
- Comparison operations.
- fmins, fmaxs
- Floating-point minimum and maximum. These instructions are only generated if -ffinite-math-only is specified.
- fsqrts
- Unary square root operation.
- fcoss, fsins, ftans, fatans, fexps, flogs
- Floating-point trigonometric and exponential functions. These instructions are only generated if -funsafe-math-optimizations is also specified.
-
Double-precision floating point:
- faddd, fsubd, fdivd, fmuld
- Binary arithmetic operations.
- fnegd
- Unary negation.
- fabsd
- Unary absolute value.
- fcmpeqd, fcmpged, fcmpgtd, fcmpled, fcmpltd, fcmpned
- Comparison operations.
- fmind, fmaxd
- Double-precision minimum and maximum. These instructions are only generated if -ffinite-math-only is specified.
- fsqrtd
- Unary square root operation.
- fcosd, fsind, ftand, fatand, fexpd, flogd
- Double-precision trigonometric and exponential functions. These instructions are only generated if -funsafe-math-optimizations is also specified.
-
Conversions:
- fextsd
- Conversion from single precision to double precision.
- ftruncds
- Conversion from double precision to single precision.
- fixsi, fixsu, fixdi, fixdu
- Conversion from floating point to signed or unsigned integer types, with truncation towards zero.
- round
- Conversion from single-precision floating point to signed integer, rounding to the nearest integer and ties away from zero. This corresponds to the "__builtin_lroundf" function when -fno-math-errno is used.
- floatis, floatus, floatid, floatud
- Conversion from signed or unsigned integer types to floating-point types.
-
In addition, all of the following transfer instructions for internal registers X and Y must be provided to use any of the double-precision floating-point instructions. Custom instructions taking two double-precision source operands expect the first operand in the 64-bit register X. The other operand (or only operand of a unary operation) is given to the custom arithmetic instruction with the least significant half in source register src1 and the most significant half in src2. A custom instruction that returns a double-precision result returns the most significant 32 bits in the destination register and the other half in 32-bit register Y.
GCCautomatically generates the necessary code sequences to write register X and/or read register Y when double-precision floating-point instructions are used.- fwrx
- Write src1 into the least significant half of X and src2 into the most significant half of X.
- fwry
- Write src1 into Y.
- frdxhi, frdxlo
- Read the most or least (respectively) significant half of X and store it in dest.
- frdy
- Read the value of Y and store it into dest.
-
Note that you can gain more local control over generation of Nios
IIcustom instructions by using the "target("custom-insn=N")" and "target("no-custom-insn")" function attributes or pragmas.
-
- -mcustom-fpu-cfg=name
-
This option enables a predefined, named set of custom instruction encodings
(see -mcustom-insn above).
Currently, the following sets are defined:
-mcustom-fpu-cfg=60-1 is equivalent to: -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254 -fsingle-precision-constant
-mcustom-fpu-cfg=60-2 is equivalent to: -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254 -mcustom-fdivs=255 -fsingle-precision-constant
-mcustom-fpu-cfg=72-3 is equivalent to: -mcustom-floatus=243 -mcustom-fixsi=244 -mcustom-floatis=245 -mcustom-fcmpgts=246 -mcustom-fcmples=249 -mcustom-fcmpeqs=250 -mcustom-fcmpnes=251 -mcustom-fmuls=252 -mcustom-fadds=253 -mcustom-fsubs=254 -mcustom-fdivs=255 -fsingle-precision-constant
Custom instruction assignments given by individual -mcustom-insn= options override those given by -mcustom-fpu-cfg=, regardless of the order of the options on the command line.
Note that you can gain more local control over selection of a
FPUconfiguration by using the "target("custom-fpu-cfg=name")" function attribute or pragma.
These additional -m options are available for the Altera Nios
- -mhal
-
Link with HAL BSP.This suppresses linking with the GCC-provided C runtime startup and termination code, and is typically used in conjunction with -msys-crt0= to specify the location of the alternate startup code provided by theHAL BSP.
- -msmallc
- Link with a limited version of the C library, -lsmallc, rather than Newlib.
- -msys-crt0=startfile
- startfile is the file name of the startfile (crt0) to use when linking. This option is only useful in conjunction with -mhal.
- -msys-lib=systemlib
-
systemlib is the library name of the library that provides
low-level system calls required by the C library,
e.g. "read" and "write".
This option is typically used to link with a library provided by a HAL BSP.
Nvidia
These options are defined for Nvidia
- -m32
- -m64
-
Generate code for 32-bit or 64-bit ABI.
- -mmainkernel
- Link in code for a __main kernel. This is for stand-alone instead of offloading execution.
- -moptimize
- Apply partitioned execution optimizations. This is the default when any level of optimization is selected.
- -msoft-stack
- Generate code that does not use ".local" memory directly for stack storage. Instead, a per-warp stack pointer is maintained explicitly. This enables variable-length stack allocation (with variable-length arrays or "alloca"), and when global memory is used for underlying storage, makes it possible to access automatic variables from other threads, or with atomic instructions. This code generation variant is used for OpenMP offloading, but the option is exposed on its own for the purpose of testing the compiler; to generate code suitable for linking into programs using OpenMP offloading, use option -mgomp.
- -muniform-simt
-
Switch to code generation variant that allows to execute all threads in each
warp, while maintaining memory state and side effects as if only one thread
in each warp was active outside of OpenMP SIMDregions. All atomic operations and calls to runtime (malloc, free, vprintf) are conditionally executed (iff current lane index equals the master lane index), and the register being assigned is copied via a shuffle instruction from the master lane. Outside ofSIMDregions lane 0 is the master; inside, each thread sees itself as the master. Shared memory array "int __nvptx_uni[]" stores all-zeros or all-ones bitmasks for each warp, indicating current mode (0 outside ofSIMDregions). Each thread can bitwise-and the bitmask at position "tid.y" with current lane index to compute the master lane index.
- -mgomp
- Generate code for use in OpenMP offloading: enables -msoft-stack and -muniform-simt options, and selects corresponding multilib variant.
These options are defined for the
- -mfpu
-
Use hardware FPPfloating point. This is the default. (FISfloating point on thePDP-11/40is not supported.)
- -msoft-float
- Do not use hardware floating point.
- -mac0
- Return floating-point results in ac0 (fr0 in Unix assembler syntax).
- -mno-ac0
- Return floating-point results in memory. This is the default.
- -m40
-
Generate code for a PDP-11/40.
- -m45
-
Generate code for a PDP-11/45.This is the default.
- -m10
-
Generate code for a PDP-11/10.
- -mbcopy-builtin
- Use inline "movmemhi" patterns for copying memory. This is the default.
- -mbcopy
- Do not use inline "movmemhi" patterns for copying memory.
- -mint16
- -mno-int32
- Use 16-bit "int". This is the default.
- -mint32
- -mno-int16
- Use 32-bit "int".
- -mfloat64
- -mno-float32
- Use 64-bit "float". This is the default.
- -mfloat32
- -mno-float64
- Use 32-bit "float".
- -mabshi
- Use "abshi2" pattern. This is the default.
- -mno-abshi
- Do not use "abshi2" pattern.
- -mbranch-expensive
- Pretend that branches are expensive. This is for experimenting with code generation only.
- -mbranch-cheap
- Do not pretend that branches are expensive. This is the default.
- -munix-asm
- Use Unix assembler syntax. This is the default when configured for pdp11-*-bsd.
- -mdec-asm
-
Use DECassembler syntax. This is the default when configured for anyPDP-11target other than pdp11-*-bsd.
picoChip Options
These -m options are defined for picoChip implementations:
- -mae=ae_type
-
Set the instruction set, register set, and instruction scheduling
parameters for array element type ae_type. Supported values
for ae_type are ANY,MUL, andMAC.
-mae=ANY selects a completely generic
AEtype. Code generated with this option runs on any of the otherAEtypes. The code is not as efficient as it would be if compiled for a specificAEtype, and some types of operation (e.g., multiplication) do not work properly on all types ofAE.-mae=MUL selects a
MUL AEtype. This is the most usefulAEtype for compiled code, and is the default.-mae=MAC selects a DSP-style
MAC AE.Code compiled with this option may suffer from poor performance of byte (char) manipulation, since theDSP AEdoes not provide hardware support for byte load/stores. - -msymbol-as-address
- Enable the compiler to directly use a symbol name as an address in a load/store instruction, without first loading it into a register. Typically, the use of this option generates larger programs, which run faster than when the option isn't used. However, the results vary from program to program, so it is left as a user option, rather than being permanently enabled.
- -mno-inefficient-warnings
-
Disables warnings about the generation of inefficient code. These
warnings can be generated, for example, when compiling code that
performs byte-level memory operations on the MAC AEtype. TheMAC AEhas no hardware support for byte-level memory operations, so all byte load/stores must be synthesized from word load/store operations. This is inefficient and a warning is generated to indicate that you should rewrite the code to avoid byte operations, or to target anAEtype that has the necessary hardware support. This option disables these warnings.
PowerPC Options
These are listed under
RISC-V Options
These command-line options are defined for RISC-V targets:
- -mbranch-cost=n
- Set the cost of branches to roughly n instructions.
- -mmemcpy
- -mno-memcpy
- Don't optimize block moves.
- -mplt
- -mno-plt
-
When generating PICcode, allow the use of PLTs. Ignored for non-PIC.
- -mabi=ABI-string
-
Specify integer and floating-point calling convention. This defaults to the
natural calling convention: e.g. LP64forRV64I, ILP32forRV32I, LP64DforRV64G.
- -mfdiv
- -mno-fdiv
- Use hardware floating-point divide and square root instructions. This requires the F or D extensions for floating-point registers.
- -mdiv
- -mno-div
- Use hardware instructions for integer division. This requires the M extension.
- -march=ISA-string
-
Generate code for given RISC-V ISA(e.g. rv64im).ISAstrings must be lower-case. Examples include rv64i, rv32g, and rv32imaf.
- -mtune=processor-string
- Optimize the output for the given processor, specified by microarchitecture name.
- -msmall-data-limit=n
- Put global and static data smaller than n bytes into a special section (on some targets).
- -msave-restore
- -mno-save-restore
- Use smaller but slower prologue and epilogue code.
- -mcmodel=code-model
- Specify the code model.
- -msim
- Links in additional target libraries to support operation within a simulator.
- -mmul=none
- -mmul=g10
- -mmul=g13
- -mmul=g14
- -mmul=rl78
-
Specifies the type of hardware multiplication and division support to
be used. The simplest is "none", which uses software for both
multiplication and division. This is the default. The "g13"
value is for the hardware multiply/divide peripheral found on the
RL78/G13(S2 core) targets. The "g14" value selects the use of the multiplication and division instructions supported by theRL78/G14(S3 core) parts. The value "rl78" is an alias for "g14" and the value "mg10" is an alias for "none".
In addition a C preprocessor macro is defined, based upon the setting of this option. Possible values are: "__RL78_MUL_NONE__", "__RL78_MUL_G13__" or "__RL78_MUL_G14__".
- -mcpu=g10
- -mcpu=g13
- -mcpu=g14
- -mcpu=rl78
-
Specifies the RL78core to target. The default is the G14 core, also known as an S3 core or justRL78.The G13 or S2 core does not have multiply or divide instructions, instead it uses a hardware peripheral for these operations. The G10 or S1 core does not have register banks, so it uses a different calling convention.
If this option is set it also selects the type of hardware multiply support to use, unless this is overridden by an explicit -mmul=none option on the command line. Thus specifying -mcpu=g13 enables the use of the G13 hardware multiply peripheral and specifying -mcpu=g10 disables the use of hardware multiplications altogether.
Note, although the
RL78/G14core is the default target, specifying -mcpu=g14 or -mcpu=rl78 on the command line does change the behavior of the toolchain since it also enables G14 hardware multiply support. If these options are not specified on the command line then software multiplication routines will be used even though the code targets theRL78core. This is for backwards compatibility with older toolchains which did not have hardware multiply and divide support.In addition a C preprocessor macro is defined, based upon the setting of this option. Possible values are: "__RL78_G10__", "__RL78_G13__" or "__RL78_G14__".
- -mg10
- -mg13
- -mg14
- -mrl78
- These are aliases for the corresponding -mcpu= option. They are provided for backwards compatibility.
- -mallregs
- Allow the compiler to use all of the available registers. By default registers "r24..r31" are reserved for use in interrupt handlers. With this option enabled these registers can be used in ordinary functions as well.
- -m64bit-doubles
- -m32bit-doubles
- Make the "double" data type be 64 bits (-m64bit-doubles) or 32 bits (-m32bit-doubles) in size. The default is -m32bit-doubles.
- -msave-mduc-in-interrupts
- -mno-save-mduc-in-interrupts
-
Specifies that interrupt handler functions should preserve the
MDUCregisters. This is only necessary if normal code might use theMDUCregisters, for example because it performs multiplication and division operations. The default is to ignore theMDUCregisters as this makes the interrupt handlers faster. The target option -mg13 needs to be passed for this to work as this feature is only available on the G13 target (S2 core). TheMDUCregisters will only be saved if the interrupt handler performs a multiplication or division operation or it calls another function.
These -m options are defined for the
- -mpowerpc-gpopt
- -mno-powerpc-gpopt
- -mpowerpc-gfxopt
- -mno-powerpc-gfxopt
- -mpowerpc64
- -mno-powerpc64
- -mmfcrf
- -mno-mfcrf
- -mpopcntb
- -mno-popcntb
- -mpopcntd
- -mno-popcntd
- -mfprnd
- -mno-fprnd
- -mcmpb
- -mno-cmpb
- -mmfpgpr
- -mno-mfpgpr
- -mhard-dfp
- -mno-hard-dfp
-
You use these options to specify which instructions are available on the
processor you are using. The default value of these options is
determined when configuring GCC.Specifying the -mcpu=cpu_type overrides the specification of these options. We recommend you use the -mcpu=cpu_type option rather than the options listed above.
Specifying -mpowerpc-gpopt allows
GCCto use the optional PowerPC architecture instructions in the General Purpose group, including floating-point square root. Specifying -mpowerpc-gfxopt allowsGCCto use the optional PowerPC architecture instructions in the Graphics group, including floating-point select.The -mmfcrf option allows
GCCto generate the move from condition register field instruction implemented on thePOWER4processor and other processors that support the PowerPC V2.01 architecture. The -mpopcntb option allowsGCCto generate the popcount and double-precisionFPreciprocal estimate instruction implemented on thePOWER5processor and other processors that support the PowerPC V2.02 architecture. The -mpopcntd option allowsGCCto generate the popcount instruction implemented on thePOWER7processor and other processors that support the PowerPC V2.06 architecture. The -mfprnd option allowsGCCto generate theFPround to integer instructions implemented on thePOWER5+processor and other processors that support the PowerPC V2.03 architecture. The -mcmpb option allowsGCCto generate the compare bytes instruction implemented on thePOWER6processor and other processors that support the PowerPC V2.05 architecture. The -mmfpgpr option allowsGCCto generate theFPmove to/from general-purpose register instructions implemented on thePOWER6Xprocessor and other processors that support the extended PowerPC V2.05 architecture. The -mhard-dfp option allowsGCCto generate the decimal floating-point instructions implemented on somePOWERprocessors.The -mpowerpc64 option allows
GCCto generate the additional 64-bit instructions that are found in the full PowerPC64 architecture and to treat GPRs as 64-bit, doubleword quantities.GCCdefaults to -mno-powerpc64. - -mcpu=cpu_type
-
Set architecture type, register usage, and
instruction scheduling parameters for machine type cpu_type.
Supported values for cpu_type are 401, 403,
405, 405fp, 440, 440fp, 464, 464fp,
476, 476fp, 505, 601, 602, 603,
603e, 604, 604e, 620, 630, 740,
7400, 7450, 750, 801, 821, 823,
860, 970, 8540, a2, e300c2,
e300c3, e500mc, e500mc64, e5500,
e6500, ec603e, G3, G4, G5,
titan, power3, power4, power5, power5+,
power6, power6x, power7, power8,
power9, powerpc, powerpc64, powerpc64le,
and rs64.
-mcpu=powerpc, -mcpu=powerpc64, and -mcpu=powerpc64le specify pure 32-bit PowerPC (either endian), 64-bit big endian PowerPC and 64-bit little endian PowerPC architecture machine types, with an appropriate, generic processor model assumed for scheduling purposes.
The other options specify a specific processor. Code generated under those options runs best on that processor, and may not run at all on others.
The -mcpu options automatically enable or disable the following options:
-maltivec -mfprnd -mhard-float -mmfcrf -mmultiple -mpopcntb -mpopcntd -mpowerpc64 -mpowerpc-gpopt -mpowerpc-gfxopt -msingle-float -mdouble-float -msimple-fpu -mstring -mmulhw -mdlmzb -mmfpgpr -mvsx -mcrypto -mdirect-move -mhtm -mpower8-fusion -mpower8-vector -mquad-memory -mquad-memory-atomic -mfloat128 -mfloat128-hardware
The particular options set for any particular
CPUvaries between compiler versions, depending on what setting seems to produce optimal code for thatCPU; it doesn't necessarily reflect the actual hardware's capabilities. If you wish to set an individual option to a particular value, you may specify it after the -mcpu option, like -mcpu=970 -mno-altivec.On
AIX,the -maltivec and -mpowerpc64 options are not enabled or disabled by the -mcpu option at present becauseAIXdoes not have full support for these options. You may still enable or disable them individually if you're sure it'll work in your environment. - -mtune=cpu_type
- Set the instruction scheduling parameters for machine type cpu_type, but do not set the architecture type or register usage, as -mcpu=cpu_type does. The same values for cpu_type are used for -mtune as for -mcpu. If both are specified, the code generated uses the architecture and registers set by -mcpu, but the scheduling parameters set by -mtune.
- -mcmodel=small
-
Generate PowerPC64 code for the small model: The TOCis limited to 64k.
- -mcmodel=medium
-
Generate PowerPC64 code for the medium model: The TOCand other static data may be up to a total of 4G in size. This is the default for 64-bit Linux.
- -mcmodel=large
-
Generate PowerPC64 code for the large model: The TOCmay be up to 4G in size. Other data and code is only limited by the 64-bit address space.
- -maltivec
- -mno-altivec
-
Generate code that uses (does not use) AltiVec instructions, and also
enable the use of built-in functions that allow more direct access to
the AltiVec instruction set. You may also need to set
-mabi=altivec to adjust the current ABIwith AltiVecABIenhancements.
When -maltivec is used, rather than -maltivec=le or -maltivec=be, the element order for AltiVec intrinsics such as "vec_splat", "vec_extract", and "vec_insert" match array element order corresponding to the endianness of the target. That is, element zero identifies the leftmost element in a vector register when targeting a big-endian platform, and identifies the rightmost element in a vector register when targeting a little-endian platform.
- -maltivec=be
-
Generate AltiVec instructions using big-endian element order,
regardless of whether the target is big- or little-endian. This is
the default when targeting a big-endian platform.
The element order is used to interpret element numbers in AltiVec intrinsics such as "vec_splat", "vec_extract", and "vec_insert". By default, these match array element order corresponding to the endianness for the target.
- -maltivec=le
-
Generate AltiVec instructions using little-endian element order,
regardless of whether the target is big- or little-endian. This is
the default when targeting a little-endian platform. This option is
currently ignored when targeting a big-endian platform.
The element order is used to interpret element numbers in AltiVec intrinsics such as "vec_splat", "vec_extract", and "vec_insert". By default, these match array element order corresponding to the endianness for the target.
- -mvrsave
- -mno-vrsave
-
Generate VRSAVEinstructions when generating AltiVec code.
- -mgen-cell-microcode
- Generate Cell microcode instructions.
- -mwarn-cell-microcode
- Warn when a Cell microcode instruction is emitted. An example of a Cell microcode instruction is a variable shift.
- -msecure-plt
-
Generate code that allows ld and ld.so
to build executables and shared
libraries with non-executable ".plt" and ".got" sections.
This is a PowerPC
32-bit SYSV ABIoption.
- -mbss-plt
-
Generate code that uses a BSS".plt" section that ld.so fills in, and requires ".plt" and ".got" sections that are both writable and executable. This is a PowerPC 32-bitSYSV ABIoption.
- -misel
- -mno-isel
-
This switch enables or disables the generation of ISELinstructions.
- -misel=yes/no
- This switch has been deprecated. Use -misel and -mno-isel instead.
- -mlra
-
Enable Local Register Allocation. By default the port uses LRA.(i.e. -mno-lra).
- -mspe
- -mno-spe
-
This switch enables or disables the generation of SPEsimd instructions.
- -mpaired
- -mno-paired
-
This switch enables or disables the generation of PAIREDsimd instructions.
- -mspe=yes/no
- This option has been deprecated. Use -mspe and -mno-spe instead.
- -mvsx
- -mno-vsx
-
Generate code that uses (does not use) vector/scalar (VSX) instructions, and also enable the use of built-in functions that allow more direct access to theVSXinstruction set.
- -mcrypto
- -mno-crypto
-
Enable the use (disable) of the built-in functions that allow direct
access to the cryptographic instructions that were added in version
2.07 of the PowerPC ISA.
- -mdirect-move
- -mno-direct-move
-
Generate code that uses (does not use) the instructions to move data
between the general purpose registers and the vector/scalar (VSX) registers that were added in version 2.07 of the PowerPCISA.
- -mhtm
- -mno-htm
-
Enable (disable) the use of the built-in functions that allow direct
access to the Hardware Transactional Memory (HTM) instructions that were added in version 2.07 of the PowerPCISA.
- -mpower8-fusion
- -mno-power8-fusion
- Generate code that keeps (does not keeps) some integer operations adjacent so that the instructions can be fused together on power8 and later processors.
- -mpower8-vector
- -mno-power8-vector
-
Generate code that uses (does not use) the vector and scalar
instructions that were added in version 2.07 of the PowerPC ISA.Also enable the use of built-in functions that allow more direct access to the vector instructions.
- -mquad-memory
- -mno-quad-memory
- Generate code that uses (does not use) the non-atomic quad word memory instructions. The -mquad-memory option requires use of 64-bit mode.
- -mquad-memory-atomic
- -mno-quad-memory-atomic
- Generate code that uses (does not use) the atomic quad word memory instructions. The -mquad-memory-atomic option requires use of 64-bit mode.
- -mupper-regs-di
- -mno-upper-regs-di
-
Generate code that uses (does not use) the scalar instructions that
target all 64 registers in the vector/scalar floating point register
set that were added in version 2.06 of the PowerPC ISAwhen processing integers. -mupper-regs-di is turned on by default if you use any of the -mcpu=power7, -mcpu=power8, -mcpu=power9, or -mvsx options.
- -mupper-regs-df
- -mno-upper-regs-df
-
Generate code that uses (does not use) the scalar double precision
instructions that target all 64 registers in the vector/scalar
floating point register set that were added in version 2.06 of the
PowerPC ISA.-mupper-regs-df is turned on by default if you use any of the -mcpu=power7, -mcpu=power8, -mcpu=power9, or -mvsx options.
- -mupper-regs-sf
- -mno-upper-regs-sf
-
Generate code that uses (does not use) the scalar single precision
instructions that target all 64 registers in the vector/scalar
floating point register set that were added in version 2.07 of the
PowerPC ISA.-mupper-regs-sf is turned on by default if you use either of the -mcpu=power8, -mpower8-vector, or -mcpu=power9 options.
- -mupper-regs
- -mno-upper-regs
-
Generate code that uses (does not use) the scalar
instructions that target all 64 registers in the vector/scalar
floating point register set, depending on the model of the machine.
If the -mno-upper-regs option is used, it turns off both -mupper-regs-sf and -mupper-regs-df options.
- -mfloat128
- -mno-float128
-
Enable/disable the __float128 keyword for IEEE128-bit floating point and use either software emulation forIEEE128-bit floating point or hardware instructions.
The
VSXinstruction set (-mvsx, -mcpu=power7, or -mcpu=power8) must be enabled to use the -mfloat128 option. The -mfloat128 option only works on PowerPC 64-bit Linux systems.If you use the
ISA 3.0instruction set (-mcpu=power9), the -mfloat128 option will also enable the generation ofISA 3.0 IEEE128-bit floating point instructions. Otherwise,IEEE128-bit floating point will be done with software emulation. - -mfloat128-hardware
- -mno-float128-hardware
-
Enable/disable using ISA 3.0hardware instructions to support the __float128 data type.
If you use -mfloat128-hardware, it will enable the option -mfloat128 as well.
If you select
ISA 3.0instructions with -mcpu=power9, but do not use either -mfloat128 or -mfloat128-hardware, theIEEE128-bit floating point support will not be enabled. - -mfloat-gprs=yes/single/double/no
- -mfloat-gprs
-
This switch enables or disables the generation of floating-point
operations on the general-purpose registers for architectures that
support it.
The argument yes or single enables the use of single-precision floating-point operations.
The argument double enables the use of single and double-precision floating-point operations.
The argument no disables floating-point operations on the general-purpose registers.
This option is currently only available on the MPC854x.
- -m32
- -m64
-
Generate code for 32-bit or 64-bit environments of Darwin and SVR4targets (including GNU/Linux). The 32-bit environment sets int, long and pointer to 32 bits and generates code that runs on any PowerPC variant. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits, and generates code for PowerPC64, as for -mpowerpc64.
- -mfull-toc
- -mno-fp-in-toc
- -mno-sum-in-toc
- -mminimal-toc
-
Modify generation of the TOC(Table Of Contents), which is created for every executable file. The -mfull-toc option is selected by default. In that case,GCCallocates at least oneTOCentry for each unique non-automatic variable reference in your program.GCCalso places floating-point constants in theTOC.However, only 16,384 entries are available in theTOC.
If you receive a linker error message that saying you have overflowed the available
TOCspace, you can reduce the amount ofTOCspace used with the -mno-fp-in-toc and -mno-sum-in-toc options. -mno-fp-in-toc preventsGCCfrom putting floating-point constants in theTOCand -mno-sum-in-toc forcesGCCto generate code to calculate the sum of an address and a constant at run time instead of putting that sum into theTOC.You may specify one or both of these options. Each causesGCCto produce very slightly slower and larger code at the expense of conservingTOCspace.If you still run out of space in the
TOCeven when you specify both of these options, specify -mminimal-toc instead. This option causesGCCto make only oneTOCentry for every file. When you specify this option,GCCproduces code that is slower and larger but which uses extremely littleTOCspace. You may wish to use this option only on files that contain less frequently-executed code. - -maix64
- -maix32
-
Enable 64-bit AIX ABIand calling convention: 64-bit pointers, 64-bit "long" type, and the infrastructure needed to support them. Specifying -maix64 implies -mpowerpc64, while -maix32 disables the 64-bitABIand implies -mno-powerpc64.GCCdefaults to -maix32.
- -mxl-compat
- -mno-xl-compat
-
Produce code that conforms more closely to IBM XLcompiler semantics when using AIX-compatibleABI.Pass floating-point arguments to prototyped functions beyond the register save area (RSA) on the stack in addition to argument FPRs. Do not assume that most significant double in 128-bit long double value is properly rounded when comparing values and converting to double. UseXLsymbol names for long double support routines.
The
AIXcalling convention was extended but not initially documented to handle an obscure K&R C case of calling a function that takes the address of its arguments with fewer arguments than declared.IBM XLcompilers access floating-point arguments that do not fit in theRSAfrom the stack when a subroutine is compiled without optimization. Because always storing floating-point arguments on the stack is inefficient and rarely needed, this option is not enabled by default and only is necessary when calling subroutines compiled byIBM XLcompilers without optimization. - -mpe
-
Support IBM RS/6000 SPParallel Environment (PE). Link an application written to use message passing with special startup code to enable the application to run. The system must havePEinstalled in the standard location (/usr/lpp/ppe.poe/), or the specs file must be overridden with the -specs= option to specify the appropriate directory location. The Parallel Environment does not support threads, so the -mpe option and the -pthread option are incompatible.
- -malign-natural
- -malign-power
-
On AIX,32-bit Darwin, and 64-bit PowerPC GNU/Linux, the option -malign-natural overrides the ABI-defined alignment of larger types, such as floating-point doubles, on their natural size-based boundary. The option -malign-power instructsGCCto follow the ABI-specified alignment rules.GCCdefaults to the standard alignment defined in theABI.
On 64-bit Darwin, natural alignment is the default, and -malign-power is not supported.
- -msoft-float
- -mhard-float
-
Generate code that does not use (uses) the floating-point register set.
Software floating-point emulation is provided if you use the
-msoft-float option, and pass the option to GCCwhen linking.
- -msingle-float
- -mdouble-float
- Generate code for single- or double-precision floating-point operations. -mdouble-float implies -msingle-float.
- -msimple-fpu
- Do not generate "sqrt" and "div" instructions for hardware floating-point unit.
- -mfpu=name
- Specify type of floating-point unit. Valid values for name are sp_lite (equivalent to -msingle-float -msimple-fpu), dp_lite (equivalent to -mdouble-float -msimple-fpu), sp_full (equivalent to -msingle-float), and dp_full (equivalent to -mdouble-float).
- -mxilinx-fpu
-
Perform optimizations for the floating-point unit on Xilinx PPC 405/440.
- -mmultiple
- -mno-multiple
-
Generate code that uses (does not use) the load multiple word
instructions and the store multiple word instructions. These
instructions are generated by default on POWERsystems, and not generated on PowerPC systems. Do not use -mmultiple on little-endian PowerPC systems, since those instructions do not work when the processor is in little-endian mode. The exceptions arePPC740andPPC750which permit these instructions in little-endian mode.
- -mstring
- -mno-string
-
Generate code that uses (does not use) the load string instructions
and the store string word instructions to save multiple registers and
do small block moves. These instructions are generated by default on
POWERsystems, and not generated on PowerPC systems. Do not use -mstring on little-endian PowerPC systems, since those instructions do not work when the processor is in little-endian mode. The exceptions arePPC740andPPC750which permit these instructions in little-endian mode.
- -mupdate
- -mno-update
- Generate code that uses (does not use) the load or store instructions that update the base register to the address of the calculated memory location. These instructions are generated by default. If you use -mno-update, there is a small window between the time that the stack pointer is updated and the address of the previous frame is stored, which means code that walks the stack frame across interrupts or signals may get corrupted data.
- -mavoid-indexed-addresses
- -mno-avoid-indexed-addresses
- Generate code that tries to avoid (not avoid) the use of indexed load or store instructions. These instructions can incur a performance penalty on Power6 processors in certain situations, such as when stepping through large arrays that cross a 16M boundary. This option is enabled by default when targeting Power6 and disabled otherwise.
- -mfused-madd
- -mno-fused-madd
- Generate code that uses (does not use) the floating-point multiply and accumulate instructions. These instructions are generated by default if hardware floating point is used. The machine-dependent -mfused-madd option is now mapped to the machine-independent -ffp-contract=fast option, and -mno-fused-madd is mapped to -ffp-contract=off.
- -mmulhw
- -mno-mulhw
-
Generate code that uses (does not use) the half-word multiply and
multiply-accumulate instructions on the IBM 405, 440, 464and 476 processors. These instructions are generated by default when targeting those processors.
- -mdlmzb
- -mno-dlmzb
-
Generate code that uses (does not use) the string-search dlmzb
instruction on the IBM 405, 440, 464and 476 processors. This instruction is generated by default when targeting those processors.
- -mno-bit-align
- -mbit-align
-
On System V.4 and embedded PowerPC systems do not (do) force structures
and unions that contain bit-fields to be aligned to the base type of the
bit-field.
For example, by default a structure containing nothing but 8 "unsigned" bit-fields of length 1 is aligned to a 4-byte boundary and has a size of 4 bytes. By using -mno-bit-align, the structure is aligned to a 1-byte boundary and is 1 byte in size.
- -mno-strict-align
- -mstrict-align
- On System V.4 and embedded PowerPC systems do not (do) assume that unaligned memory references are handled by the system.
- -mrelocatable
- -mno-relocatable
- Generate code that allows (does not allow) a static executable to be relocated to a different address at run time. A simple embedded PowerPC system loader should relocate the entire contents of ".got2" and 4-byte locations listed in the ".fixup" section, a table of 32-bit addresses generated by this option. For this to work, all objects linked together must be compiled with -mrelocatable or -mrelocatable-lib. -mrelocatable code aligns the stack to an 8-byte boundary.
- -mrelocatable-lib
- -mno-relocatable-lib
- Like -mrelocatable, -mrelocatable-lib generates a ".fixup" section to allow static executables to be relocated at run time, but -mrelocatable-lib does not use the smaller stack alignment of -mrelocatable. Objects compiled with -mrelocatable-lib may be linked with objects compiled with any combination of the -mrelocatable options.
- -mno-toc
- -mtoc
- On System V.4 and embedded PowerPC systems do not (do) assume that register 2 contains a pointer to a global area pointing to the addresses used in the program.
- -mlittle
- -mlittle-endian
- On System V.4 and embedded PowerPC systems compile code for the processor in little-endian mode. The -mlittle-endian option is the same as -mlittle.
- -mbig
- -mbig-endian
- On System V.4 and embedded PowerPC systems compile code for the processor in big-endian mode. The -mbig-endian option is the same as -mbig.
- -mdynamic-no-pic
-
On Darwin and Mac OS Xsystems, compile code so that it is not relocatable, but that its external references are relocatable. The resulting code is suitable for applications, but not shared libraries.
- -msingle-pic-base
-
Treat the register used for PICaddressing as read-only, rather than loading it in the prologue for each function. The runtime system is responsible for initializing this register with an appropriate value before execution begins.
- -mprioritize-restricted-insns=priority
- This option controls the priority that is assigned to dispatch-slot restricted instructions during the second scheduling pass. The argument priority takes the value 0, 1, or 2 to assign no, highest, or second-highest (respectively) priority to dispatch-slot restricted instructions.
- -msched-costly-dep=dependence_type
-
This option controls which dependences are considered costly
by the target during instruction scheduling. The argument
dependence_type takes one of the following values:
-
- no
- No dependence is costly.
- all
- All dependences are costly.
- true_store_to_load
- A true dependence from store to load is costly.
- store_to_load
- Any dependence from store to load is costly.
- number
- Any dependence for which the latency is greater than or equal to number is costly.
-
- -minsert-sched-nops=scheme
-
This option controls which NOPinsertion scheme is used during the second scheduling pass. The argument scheme takes one of the following values:
-
- no
- Don't insert NOPs.
- pad
- Pad with NOPs any dispatch group that has vacant issue slots, according to the scheduler's grouping.
- regroup_exact
- Insert NOPs to force costly dependent insns into separate groups. Insert exactly as many NOPs as needed to force an insn to a new group, according to the estimated processor grouping.
- number
- Insert NOPs to force costly dependent insns into separate groups. Insert number NOPs to force an insn to a new group.
-
- -mcall-sysv
-
On System V.4 and embedded PowerPC systems compile code using calling
conventions that adhere to the March 1995 draft of the System V
Application Binary Interface, PowerPC processor supplement. This is the
default unless you configured GCCusing powerpc-*-eabiaix.
- -mcall-sysv-eabi
- -mcall-eabi
- Specify both -mcall-sysv and -meabi options.
- -mcall-sysv-noeabi
- Specify both -mcall-sysv and -mno-eabi options.
- -mcall-aixdesc
-
On System V.4 and embedded PowerPC systems compile code for the AIXoperating system.
- -mcall-linux
-
On System V.4 and embedded PowerPC systems compile code for the
Linux-based GNUsystem.
- -mcall-freebsd
- On System V.4 and embedded PowerPC systems compile code for the FreeBSD operating system.
- -mcall-netbsd
- On System V.4 and embedded PowerPC systems compile code for the NetBSD operating system.
- -mcall-openbsd
- On System V.4 and embedded PowerPC systems compile code for the OpenBSD operating system.
- -maix-struct-return
-
Return all structures in memory (as specified by the AIX ABI).
- -msvr4-struct-return
-
Return structures smaller than 8 bytes in registers (as specified by the
SVR4 ABI).
- -mabi=abi-type
-
Extend the current ABIwith a particular extension, or remove such extension. Valid values are altivec, no-altivec, spe, no-spe, ibmlongdouble, ieeelongdouble, elfv1, elfv2.
- -mabi=spe
-
Extend the current ABIwithSPE ABIextensions. This does not change the defaultABI,instead it adds theSPE ABIextensions to the currentABI.
- -mabi=no-spe
-
Disable Book-E SPE ABIextensions for the currentABI.
- -mabi=ibmlongdouble
-
Change the current ABIto useIBMextended-precision long double. This is a PowerPC 32-bitSYSV ABIoption.
- -mabi=ieeelongdouble
-
Change the current ABIto useIEEEextended-precision long double. This is a PowerPC 32-bit LinuxABIoption.
- -mabi=elfv1
-
Change the current ABIto use the ELFv1ABI.This is the defaultABIfor big-endian PowerPC 64-bit Linux. Overriding the defaultABIrequires special system support and is likely to fail in spectacular ways.
- -mabi=elfv2
-
Change the current ABIto use the ELFv2ABI.This is the defaultABIfor little-endian PowerPC 64-bit Linux. Overriding the defaultABIrequires special system support and is likely to fail in spectacular ways.
- -mgnu-attribute
- -mno-gnu-attribute
-
Emit .gnu_attribute assembly directives to set tag/value pairs in a
.gnu.attributes section that specify ABIvariations in function parameters or return values.
- -mprototype
- -mno-prototype
- On System V.4 and embedded PowerPC systems assume that all calls to variable argument functions are properly prototyped. Otherwise, the compiler must insert an instruction before every non-prototyped call to set or clear bit 6 of the condition code register ("CR") to indicate whether floating-point values are passed in the floating-point registers in case the function takes variable arguments. With -mprototype, only calls to prototyped variable argument functions set or clear the bit.
- -msim
- On embedded PowerPC systems, assume that the startup module is called sim-crt0.o and that the standard C libraries are libsim.a and libc.a. This is the default for powerpc-*-eabisim configurations.
- -mmvme
- On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libmvme.a and libc.a.
- -mads
- On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libads.a and libc.a.
- -myellowknife
- On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libyk.a and libc.a.
- -mvxworks
- On System V.4 and embedded PowerPC systems, specify that you are compiling for a VxWorks system.
- -memb
-
On embedded PowerPC systems, set the "PPC_EMB" bit in the ELFflags header to indicate that eabi extended relocations are used.
- -meabi
- -mno-eabi
-
On System V.4 and embedded PowerPC systems do (do not) adhere to the
Embedded Applications Binary Interface (EABI), which is a set of modifications to the System V.4 specifications. Selecting -meabi means that the stack is aligned to an 8-byte boundary, a function "__eabi" is called from "main" to set up theEABIenvironment, and the -msdata option can use both "r2" and "r13" to point to two separate small data areas. Selecting -mno-eabi means that the stack is aligned to a 16-byte boundary, noEABIinitialization function is called from "main", and the -msdata option only uses "r13" to point to a single small data area. The -meabi option is on by default if you configuredGCCusing one of the powerpc*-*-eabi* options.
- -msdata=eabi
- On System V.4 and embedded PowerPC systems, put small initialized "const" global and static data in the ".sdata2" section, which is pointed to by register "r2". Put small initialized non-"const" global and static data in the ".sdata" section, which is pointed to by register "r13". Put small uninitialized global and static data in the ".sbss" section, which is adjacent to the ".sdata" section. The -msdata=eabi option is incompatible with the -mrelocatable option. The -msdata=eabi option also sets the -memb option.
- -msdata=sysv
- On System V.4 and embedded PowerPC systems, put small global and static data in the ".sdata" section, which is pointed to by register "r13". Put small uninitialized global and static data in the ".sbss" section, which is adjacent to the ".sdata" section. The -msdata=sysv option is incompatible with the -mrelocatable option.
- -msdata=default
- -msdata
- On System V.4 and embedded PowerPC systems, if -meabi is used, compile code the same as -msdata=eabi, otherwise compile code the same as -msdata=sysv.
- -msdata=data
- On System V.4 and embedded PowerPC systems, put small global data in the ".sdata" section. Put small uninitialized global data in the ".sbss" section. Do not use register "r13" to address small data however. This is the default behavior unless other -msdata options are used.
- -msdata=none
- -mno-sdata
- On embedded PowerPC systems, put all initialized global and static data in the ".data" section, and all uninitialized data in the ".bss" section.
- -mblock-move-inline-limit=num
- Inline all block moves (such as calls to "memcpy" or structure copies) less than or equal to num bytes. The minimum value for num is 32 bytes on 32-bit targets and 64 bytes on 64-bit targets. The default value is target-specific.
- -G num
-
On embedded PowerPC systems, put global and static items less than or
equal to num bytes into the small data or BSSsections instead of the normal data orBSSsection. By default, num is 8. The -G num switch is also passed to the linker. All modules should be compiled with the same -G num value.
- -mregnames
- -mno-regnames
- On System V.4 and embedded PowerPC systems do (do not) emit register names in the assembly language output using symbolic forms.
- -mlongcall
- -mno-longcall
-
By default assume that all calls are far away so that a longer and more
expensive calling sequence is required. This is required for calls
farther than 32 megabytes (33,554,432 bytes) from the current location.
A short call is generated if the compiler knows
the call cannot be that far away. This setting can be overridden by
the "shortcall" function attribute, or by "#pragma
longcall(0)".
Some linkers are capable of detecting out-of-range calls and generating glue code on the fly. On these systems, long calls are unnecessary and generate slower code. As of this writing, the
AIXlinker can do this, as can theGNUlinker for PowerPC/64. It is planned to add this feature to theGNUlinker for 32-bit PowerPC systems as well.On Darwin/PPC systems, "#pragma longcall" generates "jbsr callee, L42", plus a branch island (glue code). The two target addresses represent the callee and the branch island. The Darwin/PPC linker prefers the first address and generates a "bl callee" if the
PPC"bl" instruction reaches the callee directly; otherwise, the linker generates "bl L42" to call the branch island. The branch island is appended to the body of the calling function; it computes the full 32-bit address of the callee and jumps to it.On Mach-O (Darwin) systems, this option directs the compiler emit to the glue for every direct call, and the Darwin linker decides whether to use or discard it.
In the future,
GCCmay ignore all longcall specifications when the linker is known to generate glue. - -mtls-markers
- -mno-tls-markers
-
Mark (do not mark) calls to "__tls_get_addr" with a relocation
specifying the function argument. The relocation allows the linker to
reliably associate function call with argument setup instructions for
TLSoptimization, which in turn allowsGCCto better schedule the sequence.
- -mrecip
- -mno-recip
- This option enables use of the reciprocal estimate and reciprocal square root estimate instructions with additional Newton-Raphson steps to increase precision instead of doing a divide or square root and divide for floating-point arguments. You should use the -ffast-math option when using -mrecip (or at least -funsafe-math-optimizations, -ffinite-math-only, -freciprocal-math and -fno-trapping-math). Note that while the throughput of the sequence is generally higher than the throughput of the non-reciprocal instruction, the precision of the sequence can be decreased by up to 2 ulp (i.e. the inverse of 1.0 equals 0.99999994) for reciprocal square roots.
- -mrecip=opt
-
This option controls which reciprocal estimate instructions
may be used. opt is a comma-separated list of options, which may
be preceded by a "!" to invert the option:
-
- all
- Enable all estimate instructions.
- default
- Enable the default instructions, equivalent to -mrecip.
- none
- Disable all estimate instructions, equivalent to -mno-recip.
- div
- Enable the reciprocal approximation instructions for both single and double precision.
- divf
- Enable the single-precision reciprocal approximation instructions.
- divd
- Enable the double-precision reciprocal approximation instructions.
- rsqrt
- Enable the reciprocal square root approximation instructions for both single and double precision.
- rsqrtf
- Enable the single-precision reciprocal square root approximation instructions.
- rsqrtd
- Enable the double-precision reciprocal square root approximation instructions.
-
So, for example, -mrecip=all,!rsqrtd enables all of the reciprocal estimate instructions, except for the "FRSQRTE", "XSRSQRTEDP", and "XVRSQRTEDP" instructions which handle the double-precision reciprocal square root calculations.
-
- -mrecip-precision
- -mno-recip-precision
-
Assume (do not assume) that the reciprocal estimate instructions
provide higher-precision estimates than is mandated by the PowerPC
ABI.Selecting -mcpu=power6, -mcpu=power7 or -mcpu=power8 automatically selects -mrecip-precision. The double-precision square root estimate instructions are not generated by default on low-precision machines, since they do not provide an estimate that converges after three steps.
- -mveclibabi=type
-
Specifies the ABItype to use for vectorizing intrinsics using an external library. The only type supported at present is mass, which specifies to useIBM's Mathematical Acceleration Subsystem (MASS) libraries for vectorizing intrinsics using external libraries.GCCcurrently emits calls to "acosd2", "acosf4", "acoshd2", "acoshf4", "asind2", "asinf4", "asinhd2", "asinhf4", "atan2d2", "atan2f4", "atand2", "atanf4", "atanhd2", "atanhf4", "cbrtd2", "cbrtf4", "cosd2", "cosf4", "coshd2", "coshf4", "erfcd2", "erfcf4", "erfd2", "erff4", "exp2d2", "exp2f4", "expd2", "expf4", "expm1d2", "expm1f4", "hypotd2", "hypotf4", "lgammad2", "lgammaf4", "log10d2", "log10f4", "log1pd2", "log1pf4", "log2d2", "log2f4", "logd2", "logf4", "powd2", "powf4", "sind2", "sinf4", "sinhd2", "sinhf4", "sqrtd2", "sqrtf4", "tand2", "tanf4", "tanhd2", and "tanhf4" when generating code for power7. Both -ftree-vectorize and -funsafe-math-optimizations must also be enabled. TheMASSlibraries must be specified at link time.
- -mfriz
- -mno-friz
- Generate (do not generate) the "friz" instruction when the -funsafe-math-optimizations option is used to optimize rounding of floating-point values to 64-bit integer and back to floating point. The "friz" instruction does not return the same value if the floating-point number is too large to fit in an integer.
- -mpointers-to-nested-functions
- -mno-pointers-to-nested-functions
-
Generate (do not generate) code to load up the static chain register
("r11") when calling through a pointer on AIXand 64-bit Linux systems where a function pointer points to a 3-word descriptor giving the function address,TOCvalue to be loaded in register "r2", and static chain value to be loaded in register "r11". The -mpointers-to-nested-functions is on by default. You cannot call through pointers to nested functions or pointers to functions compiled in other languages that use the static chain if you use -mno-pointers-to-nested-functions.
- -msave-toc-indirect
- -mno-save-toc-indirect
-
Generate (do not generate) code to save the TOCvalue in the reserved stack location in the function prologue if the function calls through a pointer onAIXand 64-bit Linux systems. If theTOCvalue is not saved in the prologue, it is saved just before the call through the pointer. The -mno-save-toc-indirect option is the default.
- -mcompat-align-parm
- -mno-compat-align-parm
-
Generate (do not generate) code to pass structure parameters with a
maximum alignment of 64 bits, for compatibility with older versions
of GCC.
Older versions of
GCC(prior to 4.9.0) incorrectly did not align a structure parameter on a 128-bit boundary when that structure contained a member requiring 128-bit alignment. This is corrected in more recent versions ofGCC.This option may be used to generate code that is compatible with functions compiled with older versions ofGCC.The -mno-compat-align-parm option is the default.
- -mstack-protector-guard=guard
- -mstack-protector-guard-reg=reg
- -mstack-protector-guard-offset=offset
-
Generate stack protection code using canary at guard. Supported
locations are global for global canary or tls for per-thread
canary in the TLSblock (the default withGNUlibc version 2.4 or later).
With the latter choice the options -mstack-protector-guard-reg=reg and -mstack-protector-guard-offset=offset furthermore specify which register to use as base register for reading the canary, and from what offset from that base register. The default for those is as specified in the relevant
ABI.
These command-line options are defined for
- -m64bit-doubles
- -m32bit-doubles
-
Make the "double" data type be 64 bits (-m64bit-doubles)
or 32 bits (-m32bit-doubles) in size. The default is
-m32bit-doubles. Note RXfloating-point hardware only works on 32-bit values, which is why the default is -m32bit-doubles.
- -fpu
- -nofpu
-
Enables (-fpu) or disables (-nofpu) the use of RXfloating-point hardware. The default is enabled for theRX600series and disabled for theRX200series.
Floating-point instructions are only generated for 32-bit floating-point values, however, so the
FPUhardware is not used for doubles if the -m64bit-doubles option is used.Note If the -fpu option is enabled then -funsafe-math-optimizations is also enabled automatically. This is because the
RX FPUinstructions are themselves unsafe. - -mcpu=name
-
Selects the type of RX CPUto be targeted. Currently three types are supported, the genericRX600andRX200series hardware and the specificRX610CPU.The default isRX600.
The only difference between
RX600andRX610is that theRX610does not support the "MVTIPL" instruction.The
RX200series does not have a hardware floating-point unit and so -nofpu is enabled by default when this type is selected. - -mbig-endian-data
- -mlittle-endian-data
- Store data (but not code) in the big-endian format. The default is -mlittle-endian-data, i.e. to store data in the little-endian format.
- -msmall-data-limit=N
-
Specifies the maximum size in bytes of global and static variables
which can be placed into the small data area. Using the small data
area can lead to smaller and faster code, but the size of area is
limited and it is up to the programmer to ensure that the area does
not overflow. Also when the small data area is used one of the RX's registers (usually "r13") is reserved for use pointing to this area, so it is no longer available for use by the compiler. This could result in slower and/or larger code if variables are pushed onto the stack instead of being held in this register.
Note, common variables (variables that have not been initialized) and constants are not placed into the small data area as they are assigned to other sections in the output executable.
The default value is zero, which disables this feature. Note, this feature is not enabled by default with higher optimization levels (-O2 etc) because of the potentially detrimental effects of reserving a register. It is up to the programmer to experiment and discover whether this feature is of benefit to their program. See the description of the -mpid option for a description of how the actual register to hold the small data area pointer is chosen.
- -msim
- -mno-sim
- Use the simulator runtime. The default is to use the libgloss board-specific runtime.
- -mas100-syntax
- -mno-as100-syntax
-
When generating assembler output use a syntax that is compatible with
Renesas's AS100assembler. This syntax can also be handled by theGASassembler, but it has some restrictions so it is not generated by default.
- -mmax-constant-size=N
-
Specifies the maximum size, in bytes, of a constant that can be used as
an operand in a RXinstruction. Although theRXinstruction set does allow constants of up to 4 bytes in length to be used in instructions, a longer value equates to a longer instruction. Thus in some circumstances it can be beneficial to restrict the size of constants that are used in instructions. Constants that are too big are instead placed into a constant pool and referenced via register indirection.
The value N can be between 0 and 4. A value of 0 (the default) or 4 means that constants of any size are allowed.
- -mrelax
- Enable linker relaxation. Linker relaxation is a process whereby the linker attempts to reduce the size of a program by finding shorter versions of various instructions. Disabled by default.
- -mint-register=N
- Specify the number of registers to reserve for fast interrupt handler functions. The value N can be between 0 and 4. A value of 1 means that register "r13" is reserved for the exclusive use of fast interrupt handlers. A value of 2 reserves "r13" and "r12". A value of 3 reserves "r13", "r12" and "r11", and a value of 4 reserves "r13" through "r10". A value of 0, the default, does not reserve any registers.
- -msave-acc-in-interrupts
- Specifies that interrupt handler functions should preserve the accumulator register. This is only necessary if normal code might use the accumulator register, for example because it performs 64-bit multiplications. The default is to ignore the accumulator as this makes the interrupt handlers faster.
- -mpid
- -mno-pid
-
Enables the generation of position independent data. When enabled any
access to constant data is done via an offset from a base address
held in a register. This allows the location of constant data to be
determined at run time without requiring the executable to be
relocated, which is a benefit to embedded applications with tight
memory constraints. Data that can be modified is not affected by this
option.
Note, using this feature reserves a register, usually "r13", for the constant data base address. This can result in slower and/or larger code, especially in complicated functions.
The actual register chosen to hold the constant data base address depends upon whether the -msmall-data-limit and/or the -mint-register command-line options are enabled. Starting with register "r13" and proceeding downwards, registers are allocated first to satisfy the requirements of -mint-register, then -mpid and finally -msmall-data-limit. Thus it is possible for the small data area register to be "r8" if both -mint-register=4 and -mpid are specified on the command line.
By default this feature is not enabled. The default can be restored via the -mno-pid command-line option.
- -mno-warn-multiple-fast-interrupts
- -mwarn-multiple-fast-interrupts
-
Prevents GCCfrom issuing a warning message if it finds more than one fast interrupt handler when it is compiling a file. The default is to issue a warning for each extra fast interrupt handler found, as theRXonly supports one such interrupt.
- -mallow-string-insns
- -mno-allow-string-insns
-
Enables or disables the use of the string manipulation instructions
"SMOVF", "SCMPU", "SMOVB", "SMOVU", "SUNTIL"
"SWHILE" and also the "RMPA" instruction. These
instructions may prefetch data, which is not safe to do if accessing
an I/O register. (See section 12.2.7 of the RX62NGroup User's Manual for more information).
The default is to allow these instructions, but it is not possible for
GCCto reliably detect all circumstances where a string instruction might be used to access an I/O register, so their use cannot be disabled automatically. Instead it is reliant upon the programmer to use the -mno-allow-string-insns option if their program accesses I/O space.When the instructions are enabled
GCCdefines the C preprocessor symbol "__RX_ALLOW_STRING_INSNS__", otherwise it defines the symbol "__RX_DISALLOW_STRING_INSNS__". - -mjsr
- -mno-jsr
- Use only (or not only) "JSR" instructions to access functions. This option can be used when code size exceeds the range of "BSR" instructions. Note that -mno-jsr does not mean to not use "JSR" but instead means that any type of branch may be used.
Note: The generic
S/390 and zSeries Options
These are the -m options defined for the S/390 and zSeries architecture.
- -mhard-float
- -msoft-float
-
Use (do not use) the hardware floating-point instructions and registers
for floating-point operations. When -msoft-float is specified,
functions in libgcc.a are used to perform floating-point
operations. When -mhard-float is specified, the compiler
generates IEEEfloating-point instructions. This is the default.
- -mhard-dfp
- -mno-hard-dfp
- Use (do not use) the hardware decimal-floating-point instructions for decimal-floating-point operations. When -mno-hard-dfp is specified, functions in libgcc.a are used to perform decimal-floating-point operations. When -mhard-dfp is specified, the compiler generates decimal-floating-point hardware instructions. This is the default for -march=z9-ec or higher.
- -mlong-double-64
- -mlong-double-128
- These switches control the size of "long double" type. A size of 64 bits makes the "long double" type equivalent to the "double" type. This is the default.
- -mbackchain
- -mno-backchain
-
Store (do not store) the address of the caller's frame as backchain pointer
into the callee's stack frame.
A backchain may be needed to allow debugging using tools that do not understand
DWARFcall frame information. When -mno-packed-stack is in effect, the backchain pointer is stored at the bottom of the stack frame; when -mpacked-stack is in effect, the backchain is placed into the topmost word of the 96/160 byte register save area.
In general, code compiled with -mbackchain is call-compatible with code compiled with -mmo-backchain; however, use of the backchain for debugging purposes usually requires that the whole binary is built with -mbackchain. Note that the combination of -mbackchain, -mpacked-stack and -mhard-float is not supported. In order to build a linux kernel use -msoft-float.
The default is to not maintain the backchain.
- -mpacked-stack
- -mno-packed-stack
-
Use (do not use) the packed stack layout. When -mno-packed-stack is
specified, the compiler uses the all fields of the 96/160 byte register save
area only for their default purpose; unused fields still take up stack space.
When -mpacked-stack is specified, register save slots are densely
packed at the top of the register save area; unused space is reused for other
purposes, allowing for more efficient use of the available stack space.
However, when -mbackchain is also in effect, the topmost word of
the save area is always used to store the backchain, and the return address
register is always saved two words below the backchain.
As long as the stack frame backchain is not used, code generated with -mpacked-stack is call-compatible with code generated with -mno-packed-stack. Note that some non-FSF releases of
GCC 2.95for S/390 or zSeries generated code that uses the stack frame backchain at run time, not just for debugging purposes. Such code is not call-compatible with code compiled with -mpacked-stack. Also, note that the combination of -mbackchain, -mpacked-stack and -mhard-float is not supported. In order to build a linux kernel use -msoft-float.The default is to not use the packed stack layout.
- -msmall-exec
- -mno-small-exec
- Generate (or do not generate) code using the "bras" instruction to do subroutine calls. This only works reliably if the total executable size does not exceed 64k. The default is to use the "basr" instruction instead, which does not have this limitation.
- -m64
- -m31
-
When -m31 is specified, generate code compliant to the
GNU/Linux for S/390 ABI.When -m64 is specified, generate code compliant to the GNU/Linux for zSeriesABI.This allowsGCCin particular to generate 64-bit instructions. For the s390 targets, the default is -m31, while the s390x targets default to -m64.
- -mzarch
- -mesa
-
When -mzarch is specified, generate code using the
instructions available on z/Architecture.
When -mesa is specified, generate code using the
instructions available on ESA/390.Note that -mesa is not possible with -m64. When generating code compliant to the GNU/Linux for S/390ABI,the default is -mesa. When generating code compliant to the GNU/Linux for zSeriesABI,the default is -mzarch.
- -mhtm
- -mno-htm
-
The -mhtm option enables a set of builtins making use of
instructions available with the transactional execution facility
introduced with the IBMzEnterpriseEC12machine generation S/390 System z Built-in Functions. -mhtm is enabled by default when using -march=zEC12.
- -mvx
- -mno-vx
-
When -mvx is specified, generate code using the instructions
available with the vector extension facility introduced with the IBMz13 machine generation. This option changes theABIfor some vector type values with regard to alignment and calling conventions. In case vector type values are being used in an ABI-relevant context aGAS.gnu_attribute command will be added to mark the resulting binary with theABIused. -mvx is enabled by default when using -march=z13.
- -mzvector
- -mno-zvector
-
The -mzvector option enables vector language extensions and
builtins using instructions available with the vector extension
facility introduced with the IBMz13 machine generation. This option adds support for vector to be used as a keyword to define vector type variables and arguments. vector is only available whenGNUextensions are enabled. It will not be expanded when requesting strict standard compliance e.g. with -std=c99. In addition to theGCClow-level builtins -mzvector enables a set of builtins added for compatibility with AltiVec-style implementations like Power and Cell. In order to make use of these builtins the header file vecintrin.h needs to be included. -mzvector is disabled by default.
- -mmvcle
- -mno-mvcle
- Generate (or do not generate) code using the "mvcle" instruction to perform block moves. When -mno-mvcle is specified, use a "mvc" loop instead. This is the default unless optimizing for size.
- -mdebug
- -mno-debug
- Print (or do not print) additional debug information when compiling. The default is to not print debug information.
- -march=cpu-type
-
Generate code that runs on cpu-type, which is the name of a
system representing a certain processor type. Possible values for
cpu-type are z900/arch5, z990/arch6,
z9-109, z9-ec/arch7, z10/arch8,
z196/arch9, zEC12, z13/arch11, and
native.
The default is -march=z900. g5/arch3 and g6 are deprecated and will be removed with future releases.
Specifying native as cpu type can be used to select the best architecture option for the host processor. -march=native has no effect if
GCCdoes not recognize the processor. - -mtune=cpu-type
-
Tune to cpu-type everything applicable about the generated code,
except for the ABIand the set of available instructions. The list of cpu-type values is the same as for -march. The default is the value used for -march.
- -mtpf-trace
- -mno-tpf-trace
-
Generate code that adds (does not add) in TPF OSspecific branches to trace routines in the operating system. This option is off by default, even when compiling for theTPF OS.
- -mfused-madd
- -mno-fused-madd
- Generate code that uses (does not use) the floating-point multiply and accumulate instructions. These instructions are generated by default if hardware floating point is used.
- -mwarn-framesize=framesize
- Emit a warning if the current function exceeds the given frame size. Because this is a compile-time check it doesn't need to be a real problem when the program runs. It is intended to identify functions that most probably cause a stack overflow. It is useful to be used in an environment with limited stack size e.g. the linux kernel.
- -mwarn-dynamicstack
- Emit a warning if the function calls "alloca" or uses dynamically-sized arrays. This is generally a bad idea with a limited stack size.
- -mstack-guard=stack-guard
- -mstack-size=stack-size
- If these options are provided the S/390 back end emits additional instructions in the function prologue that trigger a trap if the stack size is stack-guard bytes above the stack-size (remember that the stack on S/390 grows downward). If the stack-guard option is omitted the smallest power of 2 larger than the frame size of the compiled function is chosen. These options are intended to be used to help debugging stack overflow problems. The additionally emitted code causes only little overhead and hence can also be used in production-like systems without greater performance degradation. The given values have to be exact powers of 2 and stack-size has to be greater than stack-guard without exceeding 64k. In order to be efficient the extra code makes the assumption that the stack starts at an address aligned to the value given by stack-size. The stack-guard option can only be used in conjunction with stack-size.
- -mhotpatch=pre-halfwords,post-halfwords
-
If the hotpatch option is enabled, a ``hot-patching'' function
prologue is generated for all functions in the compilation unit.
The funtion label is prepended with the given number of two-byte
NOPinstructions (pre-halfwords, maximum 1000000). After the label, 2 * post-halfwords bytes are appended, using the largestNOPlike instructions the architecture allows (maximum 1000000).
If both arguments are zero, hotpatching is disabled.
This option can be overridden for individual functions with the "hotpatch" attribute.
Score Options
These options are defined for Score implementations:
- -meb
- Compile code for big-endian mode. This is the default.
- -mel
- Compile code for little-endian mode.
- -mnhwloop
- Disable generation of "bcnz" instructions.
- -muls
- Enable generation of unaligned load and store instructions.
- -mmac
- Enable the use of multiply-accumulate instructions. Disabled by default.
- -mscore5
-
Specify the SCORE5as the target architecture.
- -mscore5u
-
Specify the SCORE5Uof the target architecture.
- -mscore7
-
Specify the SCORE7as the target architecture. This is the default.
- -mscore7d
-
Specify the SCORE7Das the target architecture.
These -m options are defined for the
- -m1
-
Generate code for the SH1.
- -m2
-
Generate code for the SH2.
- -m2e
- Generate code for the SH2e.
- -m2a-nofpu
-
Generate code for the SH2a without FPU,or for a SH2a-FPU in such a way that the floating-point unit is not used.
- -m2a-single-only
- Generate code for the SH2a-FPU, in such a way that no double-precision floating-point operations are used.
- -m2a-single
- Generate code for the SH2a-FPU assuming the floating-point unit is in single-precision mode by default.
- -m2a
- Generate code for the SH2a-FPU assuming the floating-point unit is in double-precision mode by default.
- -m3
-
Generate code for the SH3.
- -m3e
- Generate code for the SH3e.
- -m4-nofpu
-
Generate code for the SH4without a floating-point unit.
- -m4-single-only
-
Generate code for the SH4with a floating-point unit that only supports single-precision arithmetic.
- -m4-single
-
Generate code for the SH4assuming the floating-point unit is in single-precision mode by default.
- -m4
-
Generate code for the SH4.
- -m4-100
-
Generate code for SH4-100.
- -m4-100-nofpu
-
Generate code for SH4-100in such a way that the floating-point unit is not used.
- -m4-100-single
-
Generate code for SH4-100assuming the floating-point unit is in single-precision mode by default.
- -m4-100-single-only
-
Generate code for SH4-100in such a way that no double-precision floating-point operations are used.
- -m4-200
-
Generate code for SH4-200.
- -m4-200-nofpu
-
Generate code for SH4-200without in such a way that the floating-point unit is not used.
- -m4-200-single
-
Generate code for SH4-200assuming the floating-point unit is in single-precision mode by default.
- -m4-200-single-only
-
Generate code for SH4-200in such a way that no double-precision floating-point operations are used.
- -m4-300
-
Generate code for SH4-300.
- -m4-300-nofpu
-
Generate code for SH4-300without in such a way that the floating-point unit is not used.
- -m4-300-single
-
Generate code for SH4-300in such a way that no double-precision floating-point operations are used.
- -m4-300-single-only
-
Generate code for SH4-300in such a way that no double-precision floating-point operations are used.
- -m4-340
-
Generate code for SH4-340(noMMU,noFPU).
- -m4-500
-
Generate code for SH4-500(noFPU). Passes -isa=sh4-nofpu to the assembler.
- -m4a-nofpu
- Generate code for the SH4al-dsp, or for a SH4a in such a way that the floating-point unit is not used.
- -m4a-single-only
- Generate code for the SH4a, in such a way that no double-precision floating-point operations are used.
- -m4a-single
- Generate code for the SH4a assuming the floating-point unit is in single-precision mode by default.
- -m4a
- Generate code for the SH4a.
- -m4al
-
Same as -m4a-nofpu, except that it implicitly passes
-dsp to the assembler. GCCdoesn't generate anyDSPinstructions at the moment.
- -mb
- Compile code for the processor in big-endian mode.
- -ml
- Compile code for the processor in little-endian mode.
- -mdalign
- Align doubles at 64-bit boundaries. Note that this changes the calling conventions, and thus some functions from the standard C library do not work unless you recompile it first with -mdalign.
- -mrelax
- Shorten some address references at link time, when possible; uses the linker option -relax.
- -mbigtable
- Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets.
- -mbitops
-
Enable the use of bit manipulation instructions on SH2A.
- -mfmovd
- Enable the use of the instruction "fmovd". Check -mdalign for alignment constraints.
- -mrenesas
- Comply with the calling conventions defined by Renesas.
- -mno-renesas
-
Comply with the calling conventions defined for GCCbefore the Renesas conventions were available. This option is the default for all targets of theSHtoolchain.
- -mnomacsave
- Mark the "MAC" register as call-clobbered, even if -mrenesas is given.
- -mieee
- -mno-ieee
-
Control the IEEEcompliance of floating-point comparisons, which affects the handling of cases where the result of a comparison is unordered. By default -mieee is implicitly enabled. If -ffinite-math-only is enabled -mno-ieee is implicitly set, which results in faster floating-point greater-equal and less-equal comparisons. The implicit settings can be overridden by specifying either -mieee or -mno-ieee.
- -minline-ic_invalidate
-
Inline code to invalidate instruction cache entries after setting up
nested function trampolines.
This option has no effect if -musermode is in effect and the selected
code generation option (e.g. -m4) does not allow the use of the "icbi"
instruction.
If the selected code generation option does not allow the use of the "icbi"
instruction, and -musermode is not in effect, the inlined code
manipulates the instruction cache address array directly with an associative
write. This not only requires privileged mode at run time, but it also
fails if the cache line had been mapped via the TLBand has become unmapped.
- -misize
- Dump instruction size and location in the assembly code.
- -mpadstruct
-
This option is deprecated. It pads structures to multiple of 4 bytes,
which is incompatible with the SH ABI.
- -matomic-model=model
-
Sets the model of atomic operations and additional parameters as a comma
separated list. For details on the atomic built-in functions see
__atomic Builtins. The following models and parameters are supported:
-
- none
- Disable compiler generated atomic sequences and emit library calls for atomic operations. This is the default if the target is not "sh*-*-linux*".
- soft-gusa
-
Generate GNU/Linux compatible gUSA software atomic sequences for the atomic
built-in functions. The generated atomic sequences require additional support
from the interrupt/exception handling code of the system and are only suitable
for SH3* and SH4* single-core systems. This option is enabled by default when
the target is "sh*-*-linux*" and SH3* or SH4*. When the target is SH4A,this option also partially utilizes the hardware atomic instructions "movli.l" and "movco.l" to create more efficient code, unless strict is specified.
- soft-tcb
- Generate software atomic sequences that use a variable in the thread control block. This is a variation of the gUSA sequences which can also be used on SH1* and SH2* targets. The generated atomic sequences require additional support from the interrupt/exception handling code of the system and are only suitable for single-core systems. When using this model, the gbr-offset= parameter has to be specified as well.
- soft-imask
- Generate software atomic sequences that temporarily disable interrupts by setting "SR.IMASK = 1111". This model works only when the program runs in privileged mode and is only suitable for single-core systems. Additional support from the interrupt/exception handling code of the system is not required. This model is enabled by default when the target is "sh*-*-linux*" and SH1* or SH2*.
- hard-llcs
-
Generate hardware atomic sequences using the "movli.l" and "movco.l"
instructions only. This is only available on SH4Aand is suitable for multi-core systems. Since the hardware instructions support only 32 bit atomic variables access to 8 or 16 bit variables is emulated with 32 bit accesses. Code compiled with this option is also compatible with other software atomic model interrupt/exception handling systems if executed on anSH4Asystem. Additional support from the interrupt/exception handling code of the system is not required for this model.
- gbr-offset=
- This parameter specifies the offset in bytes of the variable in the thread control block structure that should be used by the generated atomic sequences when the soft-tcb model has been selected. For other models this parameter is ignored. The specified value must be an integer multiple of four and in the range 0-1020.
- strict
- This parameter prevents mixed usage of multiple atomic models, even if they are compatible, and makes the compiler generate atomic sequences of the specified model only.
-
- -mtas
-
Generate the "tas.b" opcode for "__atomic_test_and_set".
Notice that depending on the particular hardware and software configuration
this can degrade overall performance due to the operand cache line flushes
that are implied by the "tas.b" instruction. On multi-core SH4Aprocessors the "tas.b" instruction must be used with caution since it can result in data corruption for certain cache configurations.
- -mprefergot
- When generating position-independent code, emit function calls using the Global Offset Table instead of the Procedure Linkage Table.
- -musermode
- -mno-usermode
- Don't allow (allow) the compiler generating privileged mode code. Specifying -musermode also implies -mno-inline-ic_invalidate if the inlined code would not work in user mode. -musermode is the default when the target is "sh*-*-linux*". If the target is SH1* or SH2* -musermode has no effect, since there is no user mode.
- -multcost=number
- Set the cost to assume for a multiply insn.
- -mdiv=strategy
-
Set the division strategy to be used for integer division operations.
strategy can be one of:
-
- call-div1
-
Calls a library function that uses the single-step division instruction
"div1" to perform the operation. Division by zero calculates an
unspecified result and does not trap. This is the default except for SH4, SH2Aand SHcompact.
- call-fp
-
Calls a library function that performs the operation in double precision
floating point. Division by zero causes a floating-point exception. This is
the default for SHcompact with FPU.Specifying this for targets that do not have a double precisionFPUdefaults to "call-div1".
- call-table
-
Calls a library function that uses a lookup table for small divisors and
the "div1" instruction with case distinction for larger divisors. Division
by zero calculates an unspecified result and does not trap. This is the default
for SH4.Specifying this for targets that do not have dynamic shift instructions defaults to "call-div1".
-
When a division strategy has not been specified the default strategy is selected based on the current target. For
SH2Athe default strategy is to use the "divs" and "divu" instructions instead of library function calls.
-
- -maccumulate-outgoing-args
- Reserve space once for outgoing arguments in the function prologue rather than around each call. Generally beneficial for performance and size. Also needed for unwinding to avoid changing the stack frame around conditional code.
- -mdivsi3_libfunc=name
- Set the name of the library function used for 32-bit signed division to name. This only affects the name used in the call division strategies, and the compiler still expects the same sets of input/output/clobbered registers as if this option were not present.
- -mfixed-range=register-range
- Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator can not use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register ranges can be specified separated by a comma.
- -mbranch-cost=num
- Assume num to be the cost for a branch instruction. Higher numbers make the compiler try to generate more branch-free code if possible. If not specified the value is selected depending on the processor type that is being compiled for.
- -mzdcbranch
- -mno-zdcbranch
-
Assume (do not assume) that zero displacement conditional branch instructions
"bt" and "bf" are fast. If -mzdcbranch is specified, the
compiler prefers zero displacement branch code sequences. This is
enabled by default when generating code for SH4andSH4A.It can be explicitly disabled by specifying -mno-zdcbranch.
- -mcbranch-force-delay-slot
-
Force the usage of delay slots for conditional branches, which stuffs the delay
slot with a "nop" if a suitable instruction cannot be found. By default
this option is disabled. It can be enabled to work around hardware bugs as
found in the original SH7055.
- -mfused-madd
- -mno-fused-madd
- Generate code that uses (does not use) the floating-point multiply and accumulate instructions. These instructions are generated by default if hardware floating point is used. The machine-dependent -mfused-madd option is now mapped to the machine-independent -ffp-contract=fast option, and -mno-fused-madd is mapped to -ffp-contract=off.
- -mfsca
- -mno-fsca
-
Allow or disallow the compiler to emit the "fsca" instruction for sine
and cosine approximations. The option -mfsca must be used in
combination with -funsafe-math-optimizations. It is enabled by default
when generating code for SH4A.Using -mno-fsca disables sine and cosine approximations even if -funsafe-math-optimizations is in effect.
- -mfsrra
- -mno-fsrra
-
Allow or disallow the compiler to emit the "fsrra" instruction for
reciprocal square root approximations. The option -mfsrra must be used
in combination with -funsafe-math-optimizations and
-ffinite-math-only. It is enabled by default when generating code for
SH4A.Using -mno-fsrra disables reciprocal square root approximations even if -funsafe-math-optimizations and -ffinite-math-only are in effect.
- -mpretend-cmove
-
Prefer zero-displacement conditional branches for conditional move instruction
patterns. This can result in faster code on the SH4processor.
- -mfdpic
-
Generate code using the FDPIC ABI.
Solaris 2 Options
These -m options are supported on Solaris 2:
- -mclear-hwcap
-
-mclear-hwcap tells the compiler to remove the hardware
capabilities generated by the Solaris assembler. This is only necessary
when object files use ISAextensions not supported by the current machine, but check at runtime whether or not to use them.
- -mimpure-text
-
-mimpure-text, used in addition to -shared, tells
the compiler to not pass -z text to the linker when linking a
shared object. Using this option, you can link position-dependent
code into a shared object.
-mimpure-text suppresses the ``relocations remain against allocatable but non-writable sections'' linker error message. However, the necessary relocations trigger copy-on-write, and the shared object is not actually shared across processes. Instead of using -mimpure-text, you should compile all source code with -fpic or -fPIC.
These switches are supported in addition to the above on Solaris 2:
- -pthreads
- This is a synonym for -pthread.
These -m options are supported on the
- -mno-app-regs
- -mapp-regs
-
Specify -mapp-regs to generate output using the global registers
2 through 4, which the SPARC SVR4 ABIreserves for applications. Like the global register 1, each global register 2 through 4 is then treated as an allocable register that is clobbered by function calls. This is the default.
To be fully
SVR4ABI-compliant at the cost of some performance loss, specify -mno-app-regs. You should compile libraries and system software with this option. - -mflat
- -mno-flat
-
With -mflat, the compiler does not generate save/restore instructions
and uses a ``flat'' or single register window model. This model is compatible
with the regular register window model. The local registers and the input
registers (0--5) are still treated as ``call-saved'' registers and are
saved on the stack as needed.
With -mno-flat (the default), the compiler generates save/restore instructions (except for leaf functions). This is the normal operating mode.
- -mfpu
- -mhard-float
- Generate output containing floating-point instructions. This is the default.
- -mno-fpu
- -msoft-float
-
Generate output containing library calls for floating point.
Warning: the requisite libraries are not available for all SPARCtargets. Normally the facilities of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets sparc-*-aout and sparclite-*-* do provide software floating-point support.
-msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with
GCC,with -msoft-float in order for this to work. - -mhard-quad-float
- Generate output containing quad-word (long double) floating-point instructions.
- -msoft-quad-float
-
Generate output containing library calls for quad-word (long double)
floating-point instructions. The functions called are those specified
in the SPARC ABI.This is the default.
As of this writing, there are no
SPARCimplementations that have hardware support for the quad-word floating-point instructions. They all invoke a trap handler for one of these instructions, and then the trap handler emulates the effect of the instruction. Because of the trap handler overhead, this is much slower than calling theABIlibrary routines. Thus the -msoft-quad-float option is the default. - -mno-unaligned-doubles
- -munaligned-doubles
-
Assume that doubles have 8-byte alignment. This is the default.
With -munaligned-doubles,
GCCassumes that doubles have 8-byte alignment only if they are contained in another type, or if they have an absolute address. Otherwise, it assumes they have 4-byte alignment. Specifying this option avoids some rare compatibility problems with code generated by other compilers. It is not the default because it results in a performance loss, especially for floating-point code. - -muser-mode
- -mno-user-mode
-
Do not generate code that can only run in supervisor mode. This is relevant
only for the "casa" instruction emitted for the LEON3processor. This is the default.
- -mfaster-structs
- -mno-faster-structs
-
With -mfaster-structs, the compiler assumes that structures
should have 8-byte alignment. This enables the use of pairs of
"ldd" and "std" instructions for copies in structure
assignment, in place of twice as many "ld" and "st" pairs.
However, the use of this changed alignment directly violates the SPARC ABI.Thus, it's intended only for use on targets where the developer acknowledges that their resulting code is not directly in line with the rules of theABI.
- -mstd-struct-return
- -mno-std-struct-return
-
With -mstd-struct-return, the compiler generates checking code
in functions returning structures or unions to detect size mismatches
between the two sides of function calls, as per the 32-bit ABI.
The default is -mno-std-struct-return. This option has no effect in 64-bit mode.
- -mlra
- -mno-lra
-
Enable Local Register Allocation. This is the default for SPARCsinceGCC 7so -mno-lra needs to be passed to get old Reload.
- -mcpu=cpu_type
-
Set the instruction set, register set, and instruction scheduling parameters
for machine type cpu_type. Supported values for cpu_type are
v7, cypress, v8, supersparc, hypersparc,
leon, leon3, leon3v7, sparclite, f930,
f934, sparclite86x, sparclet, tsc701, v9,
ultrasparc, ultrasparc3, niagara, niagara2,
niagara3, niagara4, niagara7 and m8.
Native Solaris and GNU/Linux toolchains also support the value native, which selects the best architecture option for the host processor. -mcpu=native has no effect if
GCCdoes not recognize the processor.Default instruction scheduling parameters are used for values that select an architecture and not an implementation. These are v7, v8, sparclite, sparclet, v9.
Here is a list of each supported architecture and their supported implementations.
-
- v7
- cypress, leon3v7
- v8
- supersparc, hypersparc, leon, leon3
- sparclite
- f930, f934, sparclite86x
- sparclet
- tsc701
- v9
- ultrasparc, ultrasparc3, niagara, niagara2, niagara3, niagara4, niagara7, m8
-
By default (unless configured otherwise),
GCCgenerates code for the V7 variant of theSPARCarchitecture. With -mcpu=cypress, the compiler additionally optimizes it for the CypressCY7C602chip, as used in the SPARCStation/SPARCServer 3xx series. This is also appropriate for the older SPARCStation 1, 2,IPXetc.With -mcpu=v8,
GCCgenerates code for the V8 variant of theSPARCarchitecture. The only difference from V7 code is that the compiler emits the integer multiply and integer divide instructions which exist inSPARC-V8but not inSPARC-V7.With -mcpu=supersparc, the compiler additionally optimizes it for the SuperSPARC chip, as used in the SPARCStation 10, 1000 and 2000 series.With -mcpu=sparclite,
GCCgenerates code for the SPARClite variant of theSPARCarchitecture. This adds the integer multiply, integer divide step and scan ("ffs") instructions which exist in SPARClite but not inSPARC-V7.With -mcpu=f930, the compiler additionally optimizes it for the FujitsuMB86930chip, which is the original SPARClite, with noFPU.With -mcpu=f934, the compiler additionally optimizes it for the FujitsuMB86934chip, which is the more recent SPARClite withFPU.With -mcpu=sparclet,
GCCgenerates code for the SPARClet variant of theSPARCarchitecture. This adds the integer multiply, multiply/accumulate, integer divide step and scan ("ffs") instructions which exist in SPARClet but not inSPARC-V7.With -mcpu=tsc701, the compiler additionally optimizes it for theTEMICSPARClet chip.With -mcpu=v9,
GCCgenerates code for the V9 variant of theSPARCarchitecture. This adds 64-bit integer and floating-point move instructions, 3 additional floating-point condition code registers and conditional move instructions. With -mcpu=ultrasparc, the compiler additionally optimizes it for the Sun UltraSPARC I/II/IIi chips. With -mcpu=ultrasparc3, the compiler additionally optimizes it for the Sun UltraSPARC III/III+/IIIi/IIIi+/IV/IV+ chips. With -mcpu=niagara, the compiler additionally optimizes it for Sun UltraSPARC T1 chips. With -mcpu=niagara2, the compiler additionally optimizes it for Sun UltraSPARC T2 chips. With -mcpu=niagara3, the compiler additionally optimizes it for Sun UltraSPARC T3 chips. With -mcpu=niagara4, the compiler additionally optimizes it for Sun UltraSPARC T4 chips. With -mcpu=niagara7, the compiler additionally optimizes it for OracleSPARC M7chips. With -mcpu=m8, the compiler additionally optimizes it for Oracle M8 chips.
-
- -mtune=cpu_type
-
Set the instruction scheduling parameters for machine type
cpu_type, but do not set the instruction set or register set that the
option -mcpu=cpu_type does.
The same values for -mcpu=cpu_type can be used for -mtune=cpu_type, but the only useful values are those that select a particular
CPUimplementation. Those are cypress, supersparc, hypersparc, leon, leon3, leon3v7, f930, f934, sparclite86x, tsc701, ultrasparc, ultrasparc3, niagara, niagara2, niagara3, niagara4, niagara7 and m8. With native Solaris and GNU/Linux toolchains, native can also be used. - -mv8plus
- -mno-v8plus
-
With -mv8plus, GCCgenerates code for theSPARC-V8+ ABI.The difference from the V8ABIis that the global and out registers are considered 64 bits wide. This is enabled by default on Solaris in 32-bit mode for allSPARC-V9processors.
- -mvis
- -mno-vis
-
With -mvis, GCCgenerates code that takes advantage of the UltraSPARC Visual Instruction Set extensions. The default is -mno-vis.
- -mvis2
- -mno-vis2
-
With -mvis2, GCCgenerates code that takes advantage of version 2.0 of the UltraSPARC Visual Instruction Set extensions. The default is -mvis2 when targeting a cpu that supports such instructions, such as UltraSPARC-III and later. Setting -mvis2 also sets -mvis.
- -mvis3
- -mno-vis3
-
With -mvis3, GCCgenerates code that takes advantage of version 3.0 of the UltraSPARC Visual Instruction Set extensions. The default is -mvis3 when targeting a cpu that supports such instructions, such as niagara-3 and later. Setting -mvis3 also sets -mvis2 and -mvis.
- -mvis4
- -mno-vis4
-
With -mvis4, GCCgenerates code that takes advantage of version 4.0 of the UltraSPARC Visual Instruction Set extensions. The default is -mvis4 when targeting a cpu that supports such instructions, such as niagara-7 and later. Setting -mvis4 also sets -mvis3, -mvis2 and -mvis.
- -mvis4b
- -mno-vis4b
-
With -mvis4b, GCCgenerates code that takes advantage of version 4.0 of the UltraSPARC Visual Instruction Set extensions, plus the additionalVISinstructions introduced in the OracleSPARCArchitecture 2017. The default is -mvis4b when targeting a cpu that supports such instructions, such as m8 and later. Setting -mvis4b also sets -mvis4, -mvis3, -mvis2 and -mvis.
- -mcbcond
- -mno-cbcond
-
With -mcbcond, GCCgenerates code that takes advantage of the UltraSPARC Compare-and-Branch-on-Condition instructions. The default is -mcbcond when targeting aCPUthat supports such instructions, such as Niagara-4 and later.
- -mfmaf
- -mno-fmaf
-
With -mfmaf, GCCgenerates code that takes advantage of the UltraSPARC Fused Multiply-Add Floating-point instructions. The default is -mfmaf when targeting aCPUthat supports such instructions, such as Niagara-3 and later.
- -mfsmuld
- -mno-fsmuld
-
With -mfsmuld, GCCgenerates code that takes advantage of the Floating-point Multiply Single to Double (FsMULd) instruction. The default is -mfsmuld when targeting aCPUsupporting the architecture versions V8 or V9 withFPUexcept -mcpu=leon.
- -mpopc
- -mno-popc
-
With -mpopc, GCCgenerates code that takes advantage of the UltraSPARC Population Count instruction. The default is -mpopc when targeting aCPUthat supports such an instruction, such as Niagara-2 and later.
- -msubxc
- -mno-subxc
-
With -msubxc, GCCgenerates code that takes advantage of the UltraSPARC Subtract-Extended-with-Carry instruction. The default is -msubxc when targeting aCPUthat supports such an instruction, such as Niagara-7 and later.
- -mfix-at697f
-
Enable the documented workaround for the single erratum of the Atmel AT697Fprocessor (which corresponds to erratum #13 of theAT697Eprocessor).
- -mfix-ut699
-
Enable the documented workarounds for the floating-point errata and the data
cache nullify errata of the UT699processor.
- -mfix-ut700
-
Enable the documented workaround for the back-to-back store errata of
the UT699E/UT700processor.
- -mfix-gr712rc
-
Enable the documented workaround for the back-to-back store errata of
the GR712RCprocessor.
These -m options are supported in addition to the above on
- -m32
- -m64
- Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long and pointer to 32 bits. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits.
- -mcmodel=which
-
Set the code model to one of
-
- medlow
- The Medium/Low code model: 64-bit addresses, programs must be linked in the low 32 bits of memory. Programs can be statically or dynamically linked.
- medmid
- The Medium/Middle code model: 64-bit addresses, programs must be linked in the low 44 bits of memory, the text and data segments must be less than 2GB in size and the data segment must be located within 2GB of the text segment.
- medany
- The Medium/Anywhere code model: 64-bit addresses, programs may be linked anywhere in memory, the text and data segments must be less than 2GB in size and the data segment must be located within 2GB of the text segment.
- embmedany
-
The Medium/Anywhere code model for embedded systems:
64-bit addresses, the text and data segments must be less than 2GB in
size, both starting anywhere in memory (determined at link time). The
global register %g4 points to the base of the data segment. Programs
are statically linked and PICis not supported.
-
- -mmemory-model=mem-model
-
Set the memory model in force on the processor to one of
-
- default
- The default memory model for the processor and operating system.
- rmo
- Relaxed Memory Order
- pso
- Partial Store Order
- tso
- Total Store Order
- sc
- Sequential Consistency
-
These memory models are formally defined in Appendix D of the
SPARC-V9architecture manual, as set in the processor's "PSTATE.MM" field.
-
- -mstack-bias
- -mno-stack-bias
-
With -mstack-bias, GCCassumes that the stack pointer, and frame pointer if present, are offset by -2047 which must be added back when making stack frame references. This is the default in 64-bit mode. Otherwise, assume no such offset is present.
These -m options are supported on the
- -mwarn-reloc
- -merror-reloc
-
The loader for SPUdoes not handle dynamic relocations. By default,GCCgives an error when it generates code that requires a dynamic relocation. -mno-error-reloc disables the error, -mwarn-reloc generates a warning instead.
- -msafe-dma
- -munsafe-dma
-
Instructions that initiate or test completion of DMAmust not be reordered with respect to loads and stores of the memory that is being accessed. With -munsafe-dma you must use the "volatile" keyword to protect memory accesses, but that can lead to inefficient code in places where the memory is known to not change. Rather than mark the memory as volatile, you can use -msafe-dma to tell the compiler to treat theDMAinstructions as potentially affecting all memory.
- -mbranch-hints
-
By default, GCCgenerates a branch hint instruction to avoid pipeline stalls for always-taken or probably-taken branches. A hint is not generated closer than 8 instructions away from its branch. There is little reason to disable them, except for debugging purposes, or to make an object a little bit smaller.
- -msmall-mem
- -mlarge-mem
-
By default, GCCgenerates code assuming that addresses are never larger than 18 bits. With -mlarge-mem code is generated that assumes a full 32-bit address.
- -mstdmain
-
By default, GCClinks against startup code that assumes the SPU-style main function interface (which has an unconventional parameter list). With -mstdmain,GCClinks your program against startup code that assumes a C99-style interface to "main", including a local copy of "argv" strings.
- -mfixed-range=register-range
- Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator cannot use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple register ranges can be specified separated by a comma.
- -mea32
- -mea64
-
Compile code assuming that pointers to the PPUaddress space accessed via the "__ea" named address space qualifier are either 32 or 64 bits wide. The default is 32 bits. As this is an ABI-changing option, all object code in an executable must be compiled with the same setting.
- -maddress-space-conversion
- -mno-address-space-conversion
- Allow/disallow treating the "__ea" address space as superset of the generic address space. This enables explicit type casts between "__ea" and generic pointer as well as implicit conversions of generic pointers to "__ea" pointers. The default is to allow address space pointer conversions.
- -mcache-size=cache-size
- This option controls the version of libgcc that the compiler links to an executable and selects a software-managed cache for accessing variables in the "__ea" address space with a particular cache size. Possible options for cache-size are 8, 16, 32, 64 and 128. The default cache size is 64KB.
- -matomic-updates
- -mno-atomic-updates
-
This option controls the version of libgcc that the compiler links to an
executable and selects whether atomic updates to the software-managed
cache of PPU-side variables are used. If you use atomic updates, changes
to a PPUvariable fromSPUcode using the "__ea" named address space qualifier do not interfere with changes to otherPPUvariables residing in the same cache line fromPPUcode. If you do not use atomic updates, such interference may occur; however, writing back cache lines is more efficient. The default behavior is to use atomic updates.
- -mdual-nops
- -mdual-nops=n
-
By default, GCCinserts NOPs to increase dual issue when it expects it to increase performance. n can be a value from 0 to 10. A smaller n inserts fewer NOPs. 10 is the default, 0 is the same as -mno-dual-nops. Disabled with -Os.
- -mhint-max-nops=n
-
Maximum number of NOPs to insert for a branch hint. A branch hint must
be at least 8 instructions away from the branch it is affecting. GCCinserts up to n NOPs to enforce this, otherwise it does not generate the branch hint.
- -mhint-max-distance=n
-
The encoding of the branch hint instruction limits the hint to be within
256 instructions of the branch it is affecting. By default, GCCmakes sure it is within 125.
- -msafe-hints
-
Work around a hardware bug that causes the SPUto stall indefinitely. By default,GCCinserts the "hbrp" instruction to make sure this stall won't happen.
Options for System V
These additional options are available on System V Release 4 for compatibility with other compilers on those systems:
- -G
- Create a shared object. It is recommended that -symbolic or -shared be used instead.
- -Qy
- Identify the versions of each tool used by the compiler, in a ".ident" assembler directive in the output.
- -Qn
- Refrain from adding ".ident" directives to the output file (this is the default).
- -YP,dirs
- Search the directories dirs, and no others, for libraries specified with -l.
- -Ym,dir
- Look in the directory dir to find the M4 preprocessor. The assembler uses this option.
TILE-Gx Options
These -m options are supported on the TILE-Gx:
- -mcmodel=small
- Generate code for the small model. The distance for direct calls is limited to 500M in either direction. PC-relative addresses are 32 bits. Absolute addresses support the full address range.
- -mcmodel=large
- Generate code for the large model. There is no limitation on call distance, pc-relative addresses, or absolute addresses.
- -mcpu=name
-
Selects the type of CPUto be targeted. Currently the only supported type is tilegx.
- -m32
- -m64
- Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long, and pointer to 32 bits. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits.
- -mbig-endian
- -mlittle-endian
- Generate code in big/little endian mode, respectively.
TILEPro Options
These -m options are supported on the TILEPro:
- -mcpu=name
-
Selects the type of CPUto be targeted. Currently the only supported type is tilepro.
- -m32
- Generate code for a 32-bit environment, which sets int, long, and pointer to 32 bits. This is the only supported behavior so the flag is essentially ignored.
V850 Options
These -m options are defined for V850 implementations:
- -mlong-calls
- -mno-long-calls
- Treat all calls as being far away (near). If calls are assumed to be far away, the compiler always loads the function's address into a register, and calls indirect through the pointer.
- -mno-ep
- -mep
- Do not optimize (do optimize) basic blocks that use the same index pointer 4 or more times to copy pointer into the "ep" register, and use the shorter "sld" and "sst" instructions. The -mep option is on by default if you optimize.
- -mno-prolog-function
- -mprolog-function
- Do not use (do use) external functions to save and restore registers at the prologue and epilogue of a function. The external functions are slower, but use less code space if more than one function saves the same number of registers. The -mprolog-function option is on by default if you optimize.
- -mspace
- Try to make the code as small as possible. At present, this just turns on the -mep and -mprolog-function options.
- -mtda=n
- Put static or global variables whose size is n bytes or less into the tiny data area that register "ep" points to. The tiny data area can hold up to 256 bytes in total (128 bytes for byte references).
- -msda=n
- Put static or global variables whose size is n bytes or less into the small data area that register "gp" points to. The small data area can hold up to 64 kilobytes.
- -mzda=n
- Put static or global variables whose size is n bytes or less into the first 32 kilobytes of memory.
- -mv850
- Specify that the target processor is the V850.
- -mv850e3v5
- Specify that the target processor is the V850E3V5. The preprocessor constant "__v850e3v5__" is defined if this option is used.
- -mv850e2v4
- Specify that the target processor is the V850E3V5. This is an alias for the -mv850e3v5 option.
- -mv850e2v3
- Specify that the target processor is the V850E2V3. The preprocessor constant "__v850e2v3__" is defined if this option is used.
- -mv850e2
- Specify that the target processor is the V850E2. The preprocessor constant "__v850e2__" is defined if this option is used.
- -mv850e1
- Specify that the target processor is the V850E1. The preprocessor constants "__v850e1__" and "__v850e__" are defined if this option is used.
- -mv850es
- Specify that the target processor is the V850ES. This is an alias for the -mv850e1 option.
- -mv850e
-
Specify that the target processor is the V850E. The preprocessor
constant "__v850e__" is defined if this option is used.
If neither -mv850 nor -mv850e nor -mv850e1 nor -mv850e2 nor -mv850e2v3 nor -mv850e3v5 are defined then a default target processor is chosen and the relevant __v850*__ preprocessor constant is defined.
The preprocessor constants "__v850" and "__v851__" are always defined, regardless of which processor variant is the target.
- -mdisable-callt
- -mno-disable-callt
-
This option suppresses generation of the "CALLT" instruction for the
v850e, v850e1, v850e2, v850e2v3 and v850e3v5 flavors of the v850
architecture.
This option is enabled by default when the
RH850 ABIis in use (see -mrh850-abi), and disabled by default when theGCC ABIis in use. If "CALLT" instructions are being generated then the C preprocessor symbol "__V850_CALLT__" is defined. - -mrelax
- -mno-relax
- Pass on (or do not pass on) the -mrelax command-line option to the assembler.
- -mlong-jumps
- -mno-long-jumps
- Disable (or re-enable) the generation of PC-relative jump instructions.
- -msoft-float
- -mhard-float
- Disable (or re-enable) the generation of hardware floating point instructions. This option is only significant when the target architecture is V850E2V3 or higher. If hardware floating point instructions are being generated then the C preprocessor symbol "__FPU_OK__" is defined, otherwise the symbol "__NO_FPU__" is defined.
- -mloop
-
Enables the use of the e3v5 LOOPinstruction. The use of this instruction is not enabled by default when the e3v5 architecture is selected because its use is still experimental.
- -mrh850-abi
- -mghs
-
Enables support for the RH850version of the V850ABI.This is the default. With this version of theABIthe following rules apply:
-
- *
- Integer sized structures and unions are returned via a memory pointer rather than a register.
- *
- Large structures and unions (more than 8 bytes in size) are passed by value.
- *
- Functions are aligned to 16-bit boundaries.
- *
- The -m8byte-align command-line option is supported.
- *
- The -mdisable-callt command-line option is enabled by default. The -mno-disable-callt command-line option is not supported.
-
When this version of the
ABIis enabled the C preprocessor symbol "__V850_RH850_ABI__" is defined.
-
- -mgcc-abi
-
Enables support for the old GCCversion of the V850ABI.With this version of theABIthe following rules apply:
-
- *
- Integer sized structures and unions are returned in register "r10".
- *
- Large structures and unions (more than 8 bytes in size) are passed by reference.
- *
- Functions are aligned to 32-bit boundaries, unless optimizing for size.
- *
- The -m8byte-align command-line option is not supported.
- *
- The -mdisable-callt command-line option is supported but not enabled by default.
-
When this version of the
ABIis enabled the C preprocessor symbol "__V850_GCC_ABI__" is defined.
-
- -m8byte-align
- -mno-8byte-align
- Enables support for "double" and "long long" types to be aligned on 8-byte boundaries. The default is to restrict the alignment of all objects to at most 4-bytes. When -m8byte-align is in effect the C preprocessor symbol "__V850_8BYTE_ALIGN__" is defined.
- -mbig-switch
- Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table.
- -mapp-regs
- This option causes r2 and r5 to be used in the code generated by the compiler. This setting is the default.
- -mno-app-regs
- This option causes r2 and r5 to be treated as fixed registers.
These -m options are defined for the
- -munix
-
Do not output certain jump instructions ("aobleq" and so on)
that the Unix assembler for the VAXcannot handle across long ranges.
- -mgnu
-
Do output those jump instructions, on the assumption that the
GNUassembler is being used.
- -mg
- Output code for G-format floating-point numbers instead of D-format.
Visium Options
- -mdebug
-
A program which performs file I/O and is destined to run on an MCMtarget should be linked with this option. It causes the libraries libc.a and libdebug.a to be linked. The program should be run on the target under the control of theGDBremote debugging stub.
- -msim
- A program which performs file I/O and is destined to run on the simulator should be linked with option. This causes libraries libc.a and libsim.a to be linked.
- -mfpu
- -mhard-float
- Generate code containing floating-point instructions. This is the default.
- -mno-fpu
- -msoft-float
-
Generate code containing library calls for floating-point.
-msoft-float changes the calling convention in the output file; therefore, it is only useful if you compile all of a program with this option. In particular, you need to compile libgcc.a, the library that comes with
GCC,with -msoft-float in order for this to work. - -mcpu=cpu_type
-
Set the instruction set, register set, and instruction scheduling parameters
for machine type cpu_type. Supported values for cpu_type are
mcm, gr5 and gr6.
mcm is a synonym of gr5 present for backward compatibility.
By default (unless configured otherwise),
GCCgenerates code for theGR5variant of the Visium architecture.With -mcpu=gr6,
GCCgenerates code for theGR6variant of the Visium architecture. The only difference fromGR5code is that the compiler will generate block move instructions. - -mtune=cpu_type
- Set the instruction scheduling parameters for machine type cpu_type, but do not set the instruction set or register set that the option -mcpu=cpu_type would.
- -msv-mode
- Generate code for the supervisor mode, where there are no restrictions on the access to general registers. This is the default.
- -muser-mode
-
Generate code for the user mode, where the access to some general registers
is forbidden: on the GR5,registers r24 to r31 cannot be accessed in this mode; on theGR6,only registers r29 to r31 are affected.
These -m options are defined for the
- -mvms-return-codes
-
Return VMScondition codes from "main". The default is to return POSIX-style condition (e.g. error) codes.
- -mdebug-main=prefix
- Flag the first routine whose name starts with prefix as the main routine for the debugger.
- -mmalloc64
- Default to 64-bit memory allocation routines.
- -mpointer-size=size
- Set the default size of pointers. Possible options for size are 32 or short for 32 bit pointers, 64 or long for 64 bit pointers, and no for supporting only 32 bit pointers. The later option disables "pragma pointer_size".
VxWorks Options
The options in this section are defined for all VxWorks targets. Options specific to the target hardware are listed with the other options for that target.
- -mrtp
-
GCCcan generate code for both VxWorks kernels and real time processes (RTPs). This option switches from the former to the latter. It also defines the preprocessor macro "__RTP__".
- -non-static
-
Link an RTPexecutable against shared libraries rather than static libraries. The options -static and -shared can also be used for RTPs; -static is the default.
- -Bstatic
- -Bdynamic
- These options are passed down to the linker. They are defined for compatibility with Diab.
- -Xbind-lazy
- Enable lazy binding of function calls. This option is equivalent to -Wl,-z,now and is defined for compatibility with Diab.
- -Xbind-now
- Disable lazy binding of function calls. This option is the default and is defined for compatibility with Diab.
x86 Options
These -m options are defined for the x86 family of computers.
- -march=cpu-type
-
Generate instructions for the machine type cpu-type. In contrast to
-mtune=cpu-type, which merely tunes the generated code
for the specified cpu-type, -march=cpu-type allows GCCto generate code that may not run at all on processors other than the one indicated. Specifying -march=cpu-type implies -mtune=cpu-type.
The choices for cpu-type are:
-
- native
-
This selects the CPUto generate code for at compilation time by determining the processor type of the compiling machine. Using -march=native enables all instruction subsets supported by the local machine (hence the result might not run on different machines). Using -mtune=native produces code optimized for the local machine under the constraints of the selected instruction set.
- i386
-
Original Intel i386 CPU.
- i486
-
Intel i486 CPU.(No scheduling is implemented for this chip.)
- i586
- pentium
-
Intel Pentium CPUwith noMMXsupport.
- lakemont
-
Intel Lakemont MCU,based on Intel PentiumCPU.
- pentium-mmx
-
Intel Pentium MMX CPU,based on Pentium core withMMXinstruction set support.
- pentiumpro
-
Intel Pentium Pro CPU.
- i686
- When used with -march, the Pentium Pro instruction set is used, so the code runs on all i686 family chips. When used with -mtune, it has the same meaning as generic.
- pentium2
-
Intel Pentium II CPU,based on Pentium Pro core withMMXinstruction set support.
- pentium3
- pentium3m
-
Intel Pentium III CPU,based on Pentium Pro core withMMXandSSEinstruction set support.
- pentium-m
-
Intel Pentium M; low-power version of Intel Pentium III CPUwithMMX, SSEandSSE2instruction set support. Used by Centrino notebooks.
- pentium4
- pentium4m
-
Intel Pentium 4 CPUwithMMX, SSEandSSE2instruction set support.
- prescott
-
Improved version of Intel Pentium 4 CPUwithMMX, SSE, SSE2andSSE3instruction set support.
- nocona
-
Improved version of Intel Pentium 4 CPUwith 64-bit extensions,MMX, SSE, SSE2andSSE3instruction set support.
- core2
-
Intel Core 2 CPUwith 64-bit extensions,MMX, SSE, SSE2, SSE3andSSSE3instruction set support.
- nehalem
-
Intel Nehalem CPUwith 64-bit extensions,MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2andPOPCNTinstruction set support.
- westmere
-
Intel Westmere CPUwith 64-bit extensions,MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AESandPCLMULinstruction set support.
- sandybridge
-
Intel Sandy Bridge CPUwith 64-bit extensions,MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AESandPCLMULinstruction set support.
- ivybridge
-
Intel Ivy Bridge CPUwith 64-bit extensions,MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AES, PCLMUL, FSGSBASE, RDRNDand F16C instruction set support.
- haswell
-
Intel Haswell CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2and F16C instruction set support.
- broadwell
-
Intel Broadwell CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCXandPREFETCHWinstruction set support.
- skylake
-
Intel Skylake CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, CLFLUSHOPT, XSAVECandXSAVESinstruction set support.
- bonnell
-
Intel Bonnell CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3andSSSE3instruction set support.
- silvermont
-
Intel Silvermont CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AES, PCLMULandRDRNDinstruction set support.
- knl
-
Intel Knight's Landing CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, AVX, AVX2, AES, PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, AVX512F, AVX512PF, AVX512ERandAVX512CDinstruction set support.
- skylake-avx512
-
Intel Skylake Server CPUwith 64-bit extensions,MOVBE, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, POPCNT, PKU, AVX, AVX2, AES, PCLMUL, FSGSBASE, RDRND, FMA, BMI, BMI2, F16C, RDSEED, ADCX, PREFETCHW, CLFLUSHOPT, XSAVEC, XSAVES, AVX512F, AVX512VL, AVX512BW, AVX512DQandAVX512CDinstruction set support.
- k6
-
AMD K6 CPUwithMMXinstruction set support.
- k6-2
- k6-3
-
Improved versions of AMD K6 CPUwithMMXand 3DNow! instruction set support.
- athlon
- athlon-tbird
-
AMDAthlonCPUwithMMX,3dNOW!, enhanced 3DNow! andSSEprefetch instructions support.
- athlon-4
- athlon-xp
- athlon-mp
-
Improved AMDAthlonCPUwithMMX,3DNow!, enhanced 3DNow! and fullSSEinstruction set support.
- k8
- opteron
- athlon64
- athlon-fx
-
Processors based on the AMD K8core with x86-64 instruction set support, including theAMDOpteron, Athlon 64, and Athlon 64FXprocessors. (This supersetsMMX, SSE, SSE2,3DNow!, enhanced 3DNow! and 64-bit instruction set extensions.)
- k8-sse3
- opteron-sse3
- athlon64-sse3
-
Improved versions of AMD K8cores withSSE3instruction set support.
- amdfam10
- barcelona
-
CPUs based on AMDFamily 10h cores with x86-64 instruction set support. (This supersetsMMX, SSE, SSE2, SSE3, SSE4A,3DNow!, enhanced 3DNow!,ABMand 64-bit instruction set extensions.)
- bdver1
-
CPUs based on AMDFamily 15h cores with x86-64 instruction set support. (This supersetsFMA4, AVX, XOP, LWP, AES, PCL_MUL, CX16, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABMand 64-bit instruction set extensions.)
- bdver2
-
AMDFamily 15h core based CPUs with x86-64 instruction set support. (This supersetsBMI, TBM, F16C, FMA, FMA4, AVX, XOP, LWP, AES, PCL_MUL, CX16, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABMand 64-bit instruction set extensions.)
- bdver3
-
AMDFamily 15h core based CPUs with x86-64 instruction set support. (This supersetsBMI, TBM, F16C, FMA, FMA4, FSGSBASE, AVX, XOP, LWP, AES,PCL_MUL, CX16, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABMand 64-bit instruction set extensions.
- bdver4
-
AMDFamily 15h core based CPUs with x86-64 instruction set support. (This supersetsBMI, BMI2, TBM, F16C, FMA, FMA4, FSGSBASE, AVX, AVX2, XOP, LWP,AES, PCL_MUL, CX16, MOVBE, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1,SSE4.2, ABMand 64-bit instruction set extensions.
- znver1
-
AMDFamily 17h core based CPUs with x86-64 instruction set support. (This supersetsBMI, BMI2, F16C, FMA, FSGSBASE, AVX, AVX2, ADCX, RDSEED, MWAITX, SHA, CLZERO, AES, PCL_MUL, CX16, MOVBE, MMX, SSE, SSE2, SSE3, SSE4A, SSSE3, SSE4.1, SSE4.2, ABM, XSAVEC, XSAVES, CLFLUSHOPT, POPCNT,and 64-bit instruction set extensions.
- btver1
-
CPUs based on AMDFamily 14h cores with x86-64 instruction set support. (This supersetsMMX, SSE, SSE2, SSE3, SSSE3, SSE4A, CX16, ABMand 64-bit instruction set extensions.)
- btver2
-
CPUs based on AMDFamily 16h cores with x86-64 instruction set support. This includesMOVBE, F16C, BMI, AVX, PCL_MUL, AES, SSE4.2, SSE4.1, CX16, ABM, SSE4A, SSSE3, SSE3, SSE2, SSE, MMXand 64-bit instruction set extensions.
- winchip-c6
-
IDTWinChip C6CPU,dealt in same way as i486 with additionalMMXinstruction set support.
- winchip2
-
IDTWinChip 2CPU,dealt in same way as i486 with additionalMMXand 3DNow! instruction set support.
- c3
-
VIA C3 CPUwithMMXand 3DNow! instruction set support. (No scheduling is implemented for this chip.)
- c3-2
-
VIA C3-2(Nehemiah/C5XL)CPUwithMMXandSSEinstruction set support. (No scheduling is implemented for this chip.)
- c7
-
VIA C7(Esther)CPUwithMMX, SSE, SSE2andSSE3instruction set support. (No scheduling is implemented for this chip.)
- samuel-2
-
VIAEden Samuel 2CPUwithMMXand 3DNow! instruction set support. (No scheduling is implemented for this chip.)
- nehemiah
-
VIAEden NehemiahCPUwithMMXandSSEinstruction set support. (No scheduling is implemented for this chip.)
- esther
-
VIAEden EstherCPUwithMMX, SSE, SSE2andSSE3instruction set support. (No scheduling is implemented for this chip.)
- eden-x2
-
VIAEden X2CPUwith x86-64,MMX, SSE, SSE2andSSE3instruction set support. (No scheduling is implemented for this chip.)
- eden-x4
-
VIAEden X4CPUwith x86-64,MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVXandAVX2instruction set support. (No scheduling is implemented for this chip.)
- nano
-
Generic VIANanoCPUwith x86-64,MMX, SSE, SSE2, SSE3andSSSE3instruction set support. (No scheduling is implemented for this chip.)
- nano-1000
-
VIANano 1xxxCPUwith x86-64,MMX, SSE, SSE2, SSE3andSSSE3instruction set support. (No scheduling is implemented for this chip.)
- nano-2000
-
VIANano 2xxxCPUwith x86-64,MMX, SSE, SSE2, SSE3andSSSE3instruction set support. (No scheduling is implemented for this chip.)
- nano-3000
-
VIANano 3xxxCPUwith x86
-