tvtime (1)

Leading comments

Man page for tvtime
Copyright (c) 2003, 2004  Billy Biggs

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.

This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
Gene...

(The comments found at the beginning of the groff file "man1/tvtime.1".)

NAME

tvtime - a high quality television application

SYNOPSIS

tvtime [ OPTION ] ...

DESCRIPTION

tvtime is a high quality television application for use with video capture cards. tvtime processes the input from a capture card and displays it on a computer monitor or projector.
tvtime supports:

*

Deinterlaced output at full interlaced rate of 59.94 frames per second for NTSC source, or 50 frames per second for PAL sources. This gives smoothness of motion and high visual quality.

*

Multiple deinterlacing algorithms for finding the optimal mode for the video content and available processor speed.

*

16:9 aspect ratio mode for the highest available resolution when processing input from an external DVD player or digital satellite receiver.

*

A super-slick on-screen-display for the complete television experience, with a featureful menu system.

USAGE

Here are the core set of key bindings you want to learn for using tvtime:

Escape or q

Quit

F1 or tab

Show menu

u

Show channel list

up/down

Change channels

0-9 and Enter

Change channels

Backspace

Jump to previous channel

i

Change input

m

Mute

+/- or left/right

Volume control

f

Fullscreen

s

Take a screenshot

Enter

Display info

d

Display debug statistics

g

Shows TV Guide using the TV listings from XMLTV

Here are some advanced keys. These features are all configurable via the menu, but some of these may be useful if you use the features often:

e

Toggle audio mode (stereo/mono/SAP)

v

Toggle always-on-top with supporting window managers

F5/F6/F7

Picture settings

Space

Restore default picture settings

/

Resize the window to match the content inside it (after applying a matte or switching to 16:9 mode)

c

Toggle closed caption decoding (NTSC only)

OPTIONS

-a, --widescreen

This option starts tvtime in 16:9 aspect ratio mode.

-A, --nowidescreen

This option starts tvtime in 4:3 aspect ratio mode.

-h, --help

Show usage information.

-k, --slave

Disables keyboard input in tvtime for slave mode. Slave mode was added for integration with PVR applications like freevo or mythtv, so that freevo can handle keyboard input while tvtime is running. In slave mode, keystrokes are ignored but they are printed to standard output, and commands are read from standard input in the same syntax as tvtime-command.

-m, --fullscreen

Start tvtime in fullscreen mode.

-M, --window

Start tvtime in windowed mode.

-s, --showdrops

Print frame skip information (for debugging).

-S, --saveoptions

Save command line options to the config file. This will save the V4L device, VBI device, input number, norm, frequency, startup fullscreen setting, aspect ratio, verbose mode, and output window height.

-v, --verbose

The verbose setting indicates that we should print full informational and warning messages to standard error while running tvtime. Otherwise, only critical errors will be printed to the output.

-F, --configfile=FILE

Additional config file to load settings from.

-g, --geometry=GEOMETRY

Sets the geometry of the window, for example, 400x300 for a window 400 pixels wide and 300 pixels tall. A width value of 0 signifies that the appropriate width for the given height will be used. For 4:3 content on a square pixel display, this defaults to a 768[mu]576 window.

-I, --inputwidth=SAMPLING

V4L input scanline sampling (defaults to 720. This sets how many pixels per scanline to request from the capture card. A higher setting gives better quality, while a lower setting means we do less work, and so tvtime will run faster. If you have a slower CPU (like, less than 500Mhz or so), maybe values of 480 or 400 might suit you best. For best quality, choose a high value like 720 or 768. Many capture cards cannot sample higher than 768 pixels per scanline.

-d, --device=NAME

video4linux device to use (defaults to auto).

-l, --audioloopback

This sets the audio loopback mode. The audio loopback mode is required when capture card is not connected to the sound card via a cable. In this case, tvtime needs to map the audio from the internal digital capture out to sound card.

-L, --noaudioloopback

Disable audio loopback mode.

-b, --vbidevice=DEVICE

VBI device to use (defaults to auto).

-i, --input=INPUTNUM

video4linux input number (defaults to 0). Cards commonly have a bunch of sources, for example, on my WinTV card, source 0 is my tuner and source 1 is the composite input.

-c, --channel=CHANNEL

On startup, tvtime will tune to the given channel. Otherwise, the channels from the config file will be used.

-n, --norm=NORM

The mode to set the tuner to (defaults to NTSC). Valid modes are:

*	NTSC
*	PAL
*	SECAM
*	PAL-NC
*	PAL-M
*	PAL-N
*	NTSC-JP

-f, --frequencies=NAME

The channels you are receiving with the tuner (defaults to us-cable). Valid values are:

*	us-cable
*	us-broadcast
*	japan-cable
*	japan-broadcast
*	europe
*	australia
*	australia-optus
*	newzealand
*	france
*	russia
*	custom (first run 'tvtime-scanner')

-t, --xmltv=FILE

Reads XMLTV listings from the given file to display on the OSD. Channels are looked up based on their name, and tvtime will display the show title, sub-title and show description on the OSD.

-T, --xmltvlanguage=LANG

Use XMLTV data in given language, if available. Languages are represented by their two-letter language code (for example, "de" for German). The default language used in the file will be used if this is unset or set to "none"

-X, --display=DISPLAY

Uses the given X display to connect to.

-x, --mixer=DEVICE[:CH]|DEVICE/CH

The mixer device and channel for the volume controls. The first variant sets the OSS mixer the second one ALSA. (defaults to default/Master). Valid channels for OSS are:

*	vol
*	bass
*	treble
*	synth
*	pcm
*	speaker
*	line
*	mic
*	cd
*	mix
*	pcm2
*	rec
*	igain
*	ogain
*	line1
*	line2
*	line3
*	dig1
*	dig2
*	dig3
*	phin
*	phout
*	video
*	radio
*	monitor

FILES

/tvtime/tvtime.xml
$HOME/.tvtime/tvtime.xml
$HOME/.tvtime/stationlist.xml
/var/run/tvtime/TV-*/tvtimefifo

AUTHORS

Billy Biggs, Doug Bell, Alexander S. Belov, Achim Schneider, David I. Lehn, Paul Jara, Robert H[:o]gberg, Craig Dooley, Bart Dorsey, Nicolas Boos, Simon Law, Mark Trolley, Joachim Koenig, Stewart Allen, Justin A, Brian Goines, Krister Lagerstrom.

SEE ALSO

tvtime-command(1), tvtime-configure(1), tvtime-scanner(1), tvtime.xml(5), stationlist.xml(5).