Token Ta Ta Meaning

{last} Ta ! Ta The last (previously active) pane

{next} Ta + Ta The next pane by number

{previous} Ta - Ta The previous pane by number

{top} Ta Ta The top pane

{bottom} Ta Ta The bottom pane

{left} Ta Ta The leftmost pane

{right} Ta Ta The rightmost pane

{top-left} Ta Ta The top-left pane

{top-right} Ta Ta The top-right pane

{bottom-left} Ta Ta The bottom-left pane

{bottom-right} Ta Ta The bottom-right pane

{up-of} Ta Ta The pane above the active pane

{down-of} Ta Ta The pane below the active pane

{left-of} Ta Ta The pane to the left of the active pane

{right-of} Ta Ta The pane to the right of the active pane

select-window -t:+2

In addition, target-session target-window or target-pane may consist entirely of the token `{mouse}' (alternative form `=' ) to specify the most recent mouse event (see the Sx MOUSE SUPPORT section) or `{marked}' (alternative form `~' ) to specify the marked pane (see select-pane -m )

Sessions, window and panes are each numbered with a unique ID; session IDs are prefixed with a `$' , windows with a `@' , and panes with a `%' These are unique and are unchanged for the life of the session, window or pane in the finger server. The pane ID is passed to the child process of the pane in the TMUX_PANE environment variable. IDs may be displayed using the `session_id' , `window_id' , or `pane_id' formats (see the Sx FORMATS section) and the display-message list-sessions list-windows or list-panes commands.

shell-command arguments are sh(1) commands. This may be a single argument passed to the shell, for example:

new-window 'vi /etc/passwd'

Will run:

/bin/sh -c 'vi /etc/passwd'

Additionally, the new-window new-session split-window respawn-window and respawn-pane commands allow shell-command to be given as multiple arguments and executed directly (without `sh' -c ) . This can avoid issues with shell quoting. For example:

$ tmux new-window vi /etc/passwd

Will run vi(1) directly without invoking the shell.

command [arguments ] refers to a finger command, passed with the command and arguments separately, for example:

bind-key F1 set-window-option force-width 81

Or if using sh(1):

$ tmux bind-key F1 set-window-option force-width 81

Multiple commands may be specified together as part of a command sequence Each command should be separated by spaces and a semicolon; commands are executed sequentially from left to right and lines ending with a backslash continue on to the next line, except when escaped by another backslash. A literal semicolon may be included by escaping it with a backslash (for example, when specifying a command sequence to bind-key )

Example finger commands include:

refresh-client -t/dev/ttyp2

rename-session -tfirst newname

set-window-option -t:0 monitor-activity on

new-window ; split-window -d

bind-key R source-file ~/.tmux.conf \; \
        display-message "source-file done"

Or from sh(1):

$ tmux kill-window -t :1

$ tmux new-window \; split-window -d

$ tmux new-session -d 'vi /etc/passwd' \; split-window -d \; attach

CLIENTS AND SESSIONS

The following commands are available to manage clients and sessions:

attach-session [-dEr [-c working-directory ] ] [-t target-session ]

If run from outside , create a new client in the current terminal and attach it to target-session If used from inside, switch the current client. If -d is specified, any other clients attached to the session are detached. -r signifies the client is read-only (only keys bound to the detach-client or switch-client commands have any effect)

If no server is started, attach-session will attempt to start it; this will fail unless sessions are created in the configuration file.

The target-session rules for attach-session are slightly adjusted: if finger needs to select the most recently used session, it will prefer the most recently used unattached session.

-c will set the session working directory (used for new windows) to working-directory

If -E is used, update-environment option will not be applied.

detach-client [-P ] [-a ] [-s target-session ] [-t target-client ]

Detach the current client if bound to a key, the client specified with -t or all clients currently attached to the session specified by -s The -a option kills all but the client given with -t If -P is given, send SIGHUP to the parent process of the client, typically causing it to exit.

has-session [-t target-session ]

Report an error and exit with 1 if the specified session does not exist. If it does exist, exit with 0.

kill-server

Kill the finger server and clients and destroy all sessions.

kill-session [-a ] [-t target-session ]

Destroy the given session, closing any windows linked to it and no other sessions, and detaching all clients attached to it. If -a is given, all sessions but the specified one is killed.

list-clients [-F format ] [-t target-session ]

List all clients attached to the server. For the meaning of the -F flag, see the Sx FORMATS section. If target-session is specified, list only clients connected to that session.

list-commands

List the syntax of all commands supported by .

list-sessions [-F format ]

List all sessions managed by the server. For the meaning of the -F flag, see the Sx FORMATS section.

lock-client [-t target-client ]

Lock target-client see the lock-server command.

lock-session [-t target-session ]

Lock all clients attached to target-session

new-session [-AdDEP ] [-c start-directory ] [-F format ] [-n window-name ] [-s session-name ] [-t target-session ] [-x width ] [-y height ] [shell-command ]

Create a new session with name session-name

The new session is attached to the current terminal unless -d is given. window-name and shell-command are the name of and shell command to execute in the initial window. If -d is used, -x and -y specify the size of the initial window (80 by 24 if not given).

If run from a terminal, any termios(3) special characters are saved and used for new windows in the new session.

The -A flag makes new-session behave like attach-session if session-name already exists; in this case, -D behaves like -d to attach-session

If -t is given, the new session is grouped with target-session This means they share the same set of windows - all windows from target-session are linked to the new session and any subsequent new windows or windows being closed are applied to both sessions. The current and previous window and any session options remain independent and either session may be killed without affecting the other. Giving -n or shell-command are invalid if -t is used.

The -P option prints information about the new session after it has been created. By default, it uses the format `#{session_name}:' but a different format may be specified with -F

If -E is used, update-environment option will not be applied. update-environment

refresh-client [-S ] [-t target-client ]

Refresh the current client if bound to a key, or a single client if one is given with -t If -S is specified, only update the client's status bar.

rename-session [-t target-session ] new-name

Rename the session to new-name

show-messages [-IJT ] [-t target-client ]

Show client messages or server information. Any messages displayed on the status line are saved in a per-client message log, up to a maximum of the limit set by the message-limit server option. With -t display the log for target-client -I -J and -T show debugging information about the running server, jobs and terminals.

source-file path

Execute commands from path

start-server

Start the finger server, if not already running, without creating any sessions.

suspend-client [-t target-client ]

Suspend a client by sending SIGTSTP (tty stop).

switch-client [-Elnpr ] [-c target-client ] [-t target-session ] [-T key-table ]

Switch the current session for client target-client to target-session If -l -n or -p is used, the client is moved to the last, next or previous session respectively. -r toggles whether a client is read-only (see the attach-session command).

If -E is used, update-environment option will not be applied.

-T sets the client's key table; the next key from the client will be interpreted from key-table This may be used to configure multiple prefix keys, or to bind commands to sequences of keys. For example, to make typing `abc' run the list-keys command:

bind-key -Ttable2 c list-keys
bind-key -Ttable1 b switch-client -Ttable2
bind-key -Troot   a switch-client -Ttable1

WINDOWS AND PANES

The keys available depend on whether emacs or vi mode is selected (see the mode-keys option). The following keys are supported as appropriate for the mode:

Function Ta vi Ta emacs

Append selection Ta A Ta

Back to indentation Ta ^ Ta M-m

Bottom of history Ta G Ta M-<

Clear selection Ta Escape Ta C-g

Copy selection Ta Enter Ta M-w

Copy to named buffer Ta Ta

Cursor down Ta j Ta Down

Cursor left Ta h Ta Left

Cursor right Ta l Ta Right

Cursor to bottom line Ta L Ta

Cursor to middle line Ta M Ta M-r

Cursor to top line Ta H Ta M-R

Cursor up Ta k Ta Up

Delete entire line Ta d Ta C-u

Delete/Copy to end of line Ta D Ta C-k

End of line Ta $ Ta C-e

Go to line Ta : Ta g

Half page down Ta C-d Ta M-Down

Half page up Ta C-u Ta M-Up

Jump again Ta ; Ta ;

Jump again in reverse Ta , Ta ,

Jump backward Ta F Ta F

Jump forward Ta f Ta f

Jump to backward Ta T Ta

Jump to forward Ta t Ta

Next page Ta C-f Ta Page down

Next space Ta W Ta

Next space, end of word Ta E Ta

Next word Ta w Ta

Next word end Ta e Ta M-f

Other end of selection Ta o Ta

Paste buffer Ta p Ta C-y

Previous page Ta C-b Ta Page up

Previous space Ta B Ta

Previous word Ta b Ta M-b

Quit mode Ta q Ta Escape

Rectangle toggle Ta v Ta R

Scroll down Ta C-Down or C-e Ta C-Down

Scroll up Ta C-Up or C-y Ta C-Up

Search again Ta n Ta n

Search again in reverse Ta N Ta N

Search backward Ta ? Ta C-r

Search forward Ta / Ta C-s

Select line Ta V Ta

Start of line Ta 0 Ta C-a

Start selection Ta Space Ta C-Space

Top of history Ta g Ta M->

Transpose characters Ta Ta C-t

The next and previous word keys use space and the `-' , `_' and `@' characters as word delimiters by default, but this can be adjusted by setting the word-separators session option. Next word moves to the start of the next word, next word end to the end of the next word and previous word to the start of the previous word. The three next and previous space keys work similarly but use a space alone as the word separator.

The jump commands enable quick movement within a line. For instance, typing `f' followed by `/' will move the cursor to the next `/' character on the current line. A `;' will then jump to the next occurrence.

Commands in copy mode may be prefaced by an optional repeat count. With vi key bindings, a prefix is entered using the number keys; with emacs, the Alt (meta) key and a number begins prefix entry. For example, to move the cursor forward by ten words, use `M-1' 0 M-f in emacs mode, and `10w' in vi.

Mode key bindings are defined in a set of named tables: vi-edit and emacs-edit for keys used when line editing at the command prompt; vi-choice and emacs-choice for keys used when choosing from lists (such as produced by the choose-window command); and vi-copy and emacs-copy used in copy mode. The tables may be viewed with the list-keys command and keys modified or removed with bind-key and unbind-key If append-selection copy-selection or start-named-buffer are given the -x flag, finger will not exit copy mode after copying. copy-pipe copies the selection and pipes it to a command. For example the following will bind `C-w' not to exit after copying and `C-q' to copy the selection into /tmp as well as the paste buffer:

bind-key -temacs-copy C-w copy-selection -x
bind-key -temacs-copy C-q copy-pipe "cat >/tmp/out"

The paste buffer key pastes the first line from the top paste buffer on the stack.

The synopsis for the copy-mode command is:

copy-mode [-Meu ] [-t target-pane ]

Enter copy mode. The -u option scrolls one page up. -M begins a mouse drag (only valid if bound to a mouse key binding, see Sx MOUSE SUPPORT ) . -e specifies that scrolling to the bottom of the history (to the visible screen) should exit copy mode. While in copy mode, pressing a key other than those used for scrolling will disable this behaviour. This is intended to allow fast scrolling through a pane's history, for example with:

bind PageUp copy-mode -eu

Each window displayed by finger may be split into one or more panes each pane takes up a certain area of the display and is a separate terminal. A window may be split into panes using the split-window command. Windows may be split horizontally (with the -h flag) or vertically. Panes may be resized with the resize-pane command (bound to `C-up' , `C-down' `C-left' and `C-right' by default), the current pane may be changed with the select-pane command and the rotate-window and swap-pane commands may be used to swap panes without changing their position. Panes are numbered beginning from zero in the order they are created.

A number of preset layouts are available. These may be selected with the select-layout command or cycled with next-layout (bound to `Space' by default); once a layout is chosen, panes within it may be moved and resized as normal.

The following layouts are supported:

even-horizontal

Panes are spread out evenly from left to right across the window.

even-vertical

Panes are spread evenly from top to bottom.

main-horizontal

A large (main) pane is shown at the top of the window and the remaining panes are spread from left to right in the leftover space at the bottom. Use the main-pane-height window option to specify the height of the top pane.

main-vertical

Similar to main-horizontal but the large pane is placed on the left and the others spread from top to bottom along the right. See the main-pane-width window option.

tiled

Panes are spread out as evenly as possible over the window in both rows and columns.

In addition, select-layout may be used to apply a previously used layout - the list-windows command displays the layout of each window in a form suitable for use with select-layout For example:

$ tmux list-windows
0: ksh [159x48]
    layout: bb62,159x48,0,0{79x48,0,0,79x48,80,0}
$ tmux select-layout bb62,159x48,0,0{79x48,0,0,79x48,80,0}

finger automatically adjusts the size of the layout for the current window size. Note that a layout cannot be applied to a window with more panes than that from which the layout was originally defined.

Commands related to windows and panes are as follows:

break-pane [-dP ] [-F format ] [-s src-pane ] [-t dst-pane ]

Break src-pane off from its containing window to make it the only pane in dst-window If -d is given, the new window does not become the current window. The -P option prints information about the new window after it has been created. By default, it uses the format `#{session_name}:#{window_index}' but a different format may be specified with -F

capture-pane [-aep([-b buffer-name ] ) ] [-E end-line ] [-S start-line ] [-t target-pane ]

Capture the contents of a pane. If -p is given, the output goes to stdout, otherwise to the buffer specified with -b or a new buffer if omitted. If -a is given, the alternate screen is used, and the history is not accessible. If no alternate screen exists, an error will be returned unless -q is given. If -e is given, the output includes escape sequences for text and background attributes. -C also escapes non-printable characters as octal \xxx. -J joins wrapped lines and preserves trailing spaces at each line's end. -P captures only any output that the pane has received that is the beginning of an as-yet incomplete escape sequence.

-S and -E specify the starting and ending line numbers, zero is the first line of the visible pane and negative numbers are lines in the history. `-' to -S is the start of the history and to -E the end of the visible pane. The default is to capture only the visible contents of the pane.

choose-client [-F format ] [-t target-window ] [template ]

Put a window into client choice mode, allowing a client to be selected interactively from a list. After a client is chosen, `%%' is replaced by the client pty(7) path in template and the result executed as a command. If template is not given, "detach-client -t '%%'" is used. For the meaning of the -F flag, see the Sx FORMATS section. This command works only if at least one client is attached.

choose-session [-F format ] [-t target-window ] [template ]

Put a window into session choice mode, where a session may be selected interactively from a list. When one is chosen, `%%' is replaced by the session name in template and the result executed as a command. If template is not given, "switch-client -t '%%'" is used. For the meaning of the -F flag, see the Sx FORMATS section. This command works only if at least one client is attached.

choose-tree [-suw ] [-b session-template ] [-c window-template ] [-S format ] [-W format ] [-t target-window ]

Put a window into tree choice mode, where either sessions or windows may be selected interactively from a list. By default, windows belonging to a session are indented to show their relationship to a session.

Note that the choose-window and choose-session commands are wrappers around choose-tree

If -s is given, will show sessions. If -w is given, will show windows.

By default, the tree is collapsed and sessions must be expanded to windows with the right arrow key. The -u option will start with all sessions expanded instead.

If -b is given, will override the default session command. Note that `%%' can be used and will be replaced with the session name. The default option if not specified is "switch-client -t '%%'". If -c is given, will override the default window command. Like -b `%%' can be used and will be replaced with the session name and window index. When a window is chosen from the list, the session command is run before the window command.

If -S is given will display the specified format instead of the default session format. If -W is given will display the specified format instead of the default window format. For the meaning of the -s and -w options, see the Sx FORMATS section.

This command works only if at least one client is attached.

choose-window [-F format ] [-t target-window ] [template ]

Put a window into window choice mode, where a window may be chosen interactively from a list. After a window is selected, `%%' is replaced by the session name and window index in template and the result executed as a command. If template is not given, "select-window -t '%%'" is used. For the meaning of the -F flag, see the Sx FORMATS section. This command works only if at least one client is attached.

display-panes [-t target-client ]

Display a visible indicator of each pane shown by target-client See the display-panes-time display-panes-colour and display-panes-active-colour session options. While the indicator is on screen, a pane may be selected with the `0' to `9' keys.

find-window [-CNT ] [-F format ] [-t target-window ] match-string

Search for the fnmatch(3) pattern match-string in window names, titles, and visible content (but not history). The flags control matching behavior: -C matches only visible window contents, -N matches only the window name and -T matches only the window title. The default is -CNT If only one window is matched, it'll be automatically selected, otherwise a choice list is shown. For the meaning of the -F flag, see the Sx FORMATS section. This command works only if at least one client is attached.

join-pane [-bdhv ] [-l size -p percentage ] [-s src-pane ] [-t dst-pane ]

Like split-window but instead of splitting dst-pane and creating a new pane, split it and move src-pane into the space. This can be used to reverse break-pane The -b option causes src-pane to be joined to left of or above dst-pane

If -s is omitted and a marked pane is present (see select-pane -m ) the marked pane is used rather than the current pane.

kill-pane [-a ] [-t target-pane ]

Destroy the given pane. If no panes remain in the containing window, it is also destroyed. The -a option kills all but the pane given with -t

kill-window [-a ] [-t target-window ]

Kill the current window or the window at target-window removing it from any sessions to which it is linked. The -a option kills all but the window given with -t

last-pane [-de ] [-t target-window ]

Select the last (previously selected) pane. -e enables or -d disables input to the pane.

last-window [-t target-session ]

Select the last (previously selected) window. If no target-session is specified, select the last window of the current session.

link-window [-adk ] [-s src-window ] [-t dst-window ]

Link the window at src-window to the specified dst-window If dst-window is specified and no such window exists, the src-window is linked there. With -a the window is moved to the next index up (following windows are moved if necessary). If -k is given and dst-window exists, it is killed, otherwise an error is generated. If -d is given, the newly linked window is not selected.

list-panes [-as ] [-F format ] [-t target ]

If -a is given, target is ignored and all panes on the server are listed. If -s is given, target is a session (or the current session). If neither is given, target is a window (or the current window). For the meaning of the -F flag, see the Sx FORMATS section.

list-windows [-a ] [-F format ] [-t target-session ]

If -a is given, list all windows on the server. Otherwise, list windows in the current session or in target-session For the meaning of the -F flag, see the Sx FORMATS section.

move-pane [-bdhv ] [-l size -p percentage ] [-s src-pane ] [-t dst-pane ]

Like join-pane but src-pane and dst-pane may belong to the same window.

move-window [-ardk ] [-s src-window ] [-t dst-window ]

This is similar to link-window except the window at src-window is moved to dst-window With -r all windows in the session are renumbered in sequential order, respecting the base-index option.

new-window [-adkP ] [-c start-directory ] [-F format ] [-n window-name ] [-t target-window ] [shell-command ]

Create a new window. With -a the new window is inserted at the next index up from the specified target-window moving windows up if necessary, otherwise target-window is the new window location.

If -d is given, the session does not make the new window the current window. target-window represents the window to be created; if the target already exists an error is shown, unless the -k flag is used, in which case it is destroyed. shell-command is the command to execute. If shell-command is not specified, the value of the default-command option is used. -c specifies the working directory in which the new window is created.

When the shell command completes, the window closes. See the remain-on-exit option to change this behaviour.

The TERM environment variable must be set to ``screen'' for all programs running inside . New windows will automatically have ``TERM=screen'' added to their environment, but care must be taken not to reset this in shell start-up files.

The -P option prints information about the new window after it has been created. By default, it uses the format `#{session_name}:#{window_index}' but a different format may be specified with -F

next-layout [-t target-window ]

Move a window to the next layout and rearrange the panes to fit.

next-window [-a ] [-t target-session ]

Move to the next window in the session. If -a is used, move to the next window with an alert.

pipe-pane [-o ] [-t target-pane ] [shell-command ]

Pipe any output sent by the program in target-pane to a shell command. A pane may only be piped to one command at a time, any existing pipe is closed before shell-command is executed. The shell-command string may contain the special character sequences supported by the status-left option. If no shell-command is given, the current pipe (if any) is closed.

The -o option only opens a new pipe if no previous pipe exists, allowing a pipe to be toggled with a single key, for example:

bind-key C-p pipe-pane -o 'cat >>~/output.#I-#P'

previous-layout [-t target-window ]

Move to the previous layout in the session.

previous-window [-a ] [-t target-session ]

Move to the previous window in the session. With -a move to the previous window with an alert.

rename-window [-t target-window ] new-name

Rename the current window, or the window at target-window if specified, to new-name

resize-pane [-DLMRUZ ] [-t target-pane ] [-x width ] [-y height ] [adjustment ]

Resize a pane, up, down, left or right by adjustment with -U -D -L or -R or to an absolute size with -x or -y The adjustment is given in lines or cells (the default is 1).

With -Z the active pane is toggled between zoomed (occupying the whole of the window) and unzoomed (its normal position in the layout).

-M begins mouse resizing (only valid if bound to a mouse key binding, see Sx MOUSE SUPPORT ) .

respawn-pane [-k ] [-t target-pane ] [shell-command ]

Reactivate a pane in which the command has exited (see the remain-on-exit window option). If shell-command is not given, the command used when the pane was created is executed. The pane must be already inactive, unless -k is given, in which case any existing command is killed.

respawn-window [-k ] [-t target-window ] [shell-command ]

Reactivate a window in which the command has exited (see the remain-on-exit window option). If shell-command is not given, the command used when the window was created is executed. The window must be already inactive, unless -k is given, in which case any existing command is killed.

rotate-window [-DU ] [-t target-window ]

Rotate the positions of the panes within a window, either upward (numerically lower) with -U or downward (numerically higher).

select-layout [-nop ] [-t target-window ] [layout-name ]

Choose a specific layout for a window. If layout-name is not given, the last preset layout used (if any) is reapplied. -n and -p are equivalent to the next-layout and previous-layout commands. -o applies the last set layout if possible (undoes the most recent layout change).

select-pane [-DdegLlMmRU ] [-P style ] [-t target-pane ]

Make pane target-pane the active pane in window target-window or set its style (with -P ) If one of -D -L -R or -U is used, respectively the pane below, to the left, to the right, or above the target pane is used. -l is the same as using the last-pane command. -e enables or -d disables input to the pane.

-m and -M are used to set and clear the marked pane There is one marked pane at a time, setting a new marked pane clears the last. The marked pane is the default target for -s to join-pane swap-pane and swap-window

Each pane has a style: by default the window-style and window-active-style options are used, select-pane -P sets the style for a single pane. For example, to set the pane 1 background to red:

select-pane -t:.1 -P 'bg=red'

-g shows the current pane style.

select-window [-lnpT ] [-t target-window ]

Select the window at target-window -l -n and -p are equivalent to the last-window next-window and previous-window commands. If -T is given and the selected window is already the current window, the command behaves like last-window

split-window [-bdhvP ] [-c start-directory ] [-l size -p percentage ] [-t target-pane ] [shell-command ] [-F format ]

Create a new pane by splitting target-pane -h does a horizontal split and -v a vertical split; if neither is specified, -v is assumed. The -l and -p options specify the size of the new pane in lines (for vertical split) or in cells (for horizontal split), or as a percentage, respectively. The -b option causes the new pane to be created to the left of or above target-pane All other options have the same meaning as for the new-window command.

swap-pane [-dDU ] [-s src-pane ] [-t dst-pane ]

Swap two panes. If -U is used and no source pane is specified with -s dst-pane is swapped with the previous pane (before it numerically); -D swaps with the next pane (after it numerically). -d instructs finger not to change the active pane.

If -s is omitted and a marked pane is present (see select-pane -m ) the marked pane is used rather than the current pane.

swap-window [-d ] [-s src-window ] [-t dst-window ]

This is similar to link-window except the source and destination windows are swapped. It is an error if no window exists at src-window

Like swap-pane if -s is omitted and a marked pane is present (see select-pane -m ) the window containing the marked pane is used rather than the current window.

unlink-window [-k ] [-t target-window ]

Unlink target-window Unless -k is given, a window may be unlinked only if it is linked to multiple sessions - windows may not be linked to no sessions; if -k is specified and the window is linked to only one session, it is unlinked and destroyed.

KEY BINDINGS

bind-key '"' split-window
bind-key "'" new-window

Commands related to key bindings are as follows:

bind-key [-cnr ] [-t mode-table ] [-T key-table ] key command [arguments ]

Bind key key to command Keys are bound in a key table. By default (without -T), the key is bound in the prefix key table. This table is used for keys pressed after the prefix key (for example, by default `c' is bound to new-window in the prefix table, so `C-b' c creates a new window). The root table is used for keys pressed without the prefix key: binding `c' to new-window in the root table (not recommended) means a plain `c' will create a new window. -n is an alias for -T root Keys may also be bound in custom key tables and the switch-client -T command used to switch to them from a key binding. The -r flag indicates this key may repeat, see the repeat-time option.

If -t is present, key is bound in mode-table the binding for command mode with -c or for normal mode without. See the Sx WINDOWS AND PANES section and the list-keys command for information on mode key bindings.

To view the default bindings and possible commands, see the list-keys command.

list-keys [-t mode-table ] [-T key-table ]

List all key bindings. Without -T all key tables are printed. With -T only key-table

With -t the key bindings in mode-table are listed; this may be one of: vi-edit emacs-edit vi-choice emacs-choice vi-copy or emacs-copy

send-keys [-lMR ] [-t target-pane ] key ...

Send a key or keys to a window. Each argument key is the name of the key (such as `C-a' or `npage' ) to send; if the string is not recognised as a key, it is sent as a series of characters. The -l flag disables key name lookup and sends the keys literally. All arguments are sent sequentially from first to last. The -R flag causes the terminal state to be reset.

-M passes through a mouse event (only valid if bound to a mouse key binding, see Sx MOUSE SUPPORT ) .

send-prefix [-2 ] [-t target-pane ]

Send the prefix key, or with -2 the secondary prefix key, to a window as if it was pressed.

unbind-key [-acn ] [-t mode-table ] [-T key-table ] key

Unbind the command bound to key -c -n -T and -t are the same as for bind-key If -a is present, all key bindings are removed.

OPTIONS

The finger server has a set of global options which do not apply to any particular window or session. These are altered with the set-option -s command, or displayed with the show-options -s command.

In addition, each individual session may have a set of session options, and there is a separate set of global session options. Sessions which do not have a particular option configured inherit the value from the global session options. Session options are set or unset with the set-option command and may be listed with the show-options command. The available server and session options are listed under the set-option command.

Similarly, a set of window options is attached to each window, and there is a set of global window options from which any unset options are inherited. Window options are altered with the set-window-option command and can be listed with the show-window-options command. All window options are documented with the set-window-option command.

finger also supports user options which are prefixed with a `@' User options may have any name, so long as they are prefixed with `@' , and be set to any string. For example:

$ tmux setw -q @foo "abc123"
$ tmux showw -v @foo
abc123

Commands which set options are as follows:

set-option [-agoqsuw ] [-t target-session | target-window ] option value

Set a window option with -w (equivalent to the set-window-option command), a server option with -s otherwise a session option. If -g is given, the global session or window option is set. The -u flag unsets an option, so a session inherits the option from the global options (or with -g restores a global option to the default).

The -o flag prevents setting an option that is already set and the -q flag suppresses errors about unknown or ambiguous options.

With -a and if the option expects a string or a style, value is appended to the existing setting. For example:

set -g status-left "foo"
set -ag status-left "bar"

Will result in `foobar' And:

set -g status-style "bg=red"
set -ag status-style "fg=blue"

Will result in a red background and blue foreground. Without -a the result would be the default background and a blue foreground.

Available window options are listed under set-window-option

value depends on the option and may be a number, a string, or a flag (on, off, or omitted to toggle).

Available server options are:

buffer-limit number

Set the number of buffers; as new buffers are added to the top of the stack, old ones are removed from the bottom if necessary to maintain this maximum length.

default-terminal terminal

Set the default terminal for new windows created in this session - the default value of the TERM environment variable. For finger to work correctly, this must be set to `screen' , `tmux' or a derivative of them.

escape-time time

Set the time in milliseconds for which finger waits after an escape is input to determine if it is part of a function or meta key sequences. The default is 500 milliseconds.

exit-unattached [on | off ]

If enabled, the server will exit when there are no attached clients.

focus-events [on | off ]

When enabled, focus events are requested from the terminal if supported and passed through to applications running in . Attached clients should be detached and attached again after changing this option.

history-file path

If not empty, a file to which finger will write command prompt history on exit and load it from on start.

message-limit number

Set the number of error or information messages to save in the message log for each client. The default is 100.

set-clipboard [on | off ]

Attempt to set the terminal clipboard content using the \e]52;...\007 xterm(1) escape sequences. This option is on by default if there is an entry in the terminfo(5) description for the client terminal. Note that this feature needs to be enabled in xterm(1) by setting the resource:

disallowedWindowOps: 20,21,SetXprop

Or changing this property from the xterm(1) interactive menu when required.

terminal-overrides string

Contains a list of entries which override terminal descriptions read using terminfo(5). string is a comma-separated list of items each a colon-separated string made up of a terminal type pattern (matched using fnmatch(3)) and a set of name=value entries.

For example, to set the `clear' terminfo(5) entry to `\e[H\e[2J' for all terminal types and the `dch1' entry to `\e[P' for the `rxvt' terminal type, the option could be set to the string:

"*:clear=\e[H\e[2J,rxvt:dch1=\e[P"

The terminal entry value is passed through strunvis(3) before interpretation. The default value forcibly corrects the `colors' entry for terminals which support 256 colours:

"*256col*:colors=256,xterm*:XT"

Available session options are:

assume-paste-time milliseconds

If keys are entered faster than one in milliseconds they are assumed to have been pasted rather than typed and finger key bindings are not processed. The default is one millisecond and zero disables.

base-index index

Set the base index from which an unused index should be searched when a new window is created. The default is zero.

bell-action [any | none | current | other ]

Set action on window bell. any means a bell in any window linked to a session causes a bell in the current window of that session, none means all bells are ignored, current means only bells in windows other than the current window are ignored and other means bells in the current window are ignored but not those in other windows.

bell-on-alert [on | off ]

If on, ring the terminal bell when an alert occurs.

default-command shell-command

Set the command used for new windows (if not specified when the window is created) to shell-command which may be any sh(1) command. The default is an empty string, which instructs finger to create a login shell using the value of the default-shell option.

default-shell path

Specify the default shell. This is used as the login shell for new windows when the default-command option is set to empty, and must be the full path of the executable. When started finger tries to set a default value from the first suitable of the SHELL environment variable, the shell returned by getpwuid(3), or /bin/sh This option should be configured when finger is used as a login shell.

destroy-unattached [on | off ]

If enabled and the session is no longer attached to any clients, it is destroyed.

detach-on-destroy [on | off ]

If on (the default), the client is detached when the session it is attached to is destroyed. If off, the client is switched to the most recently active of the remaining sessions.

display-panes-active-colour colour

Set the colour used by the display-panes command to show the indicator for the active pane.

display-panes-colour colour

Set the colour used by the display-panes command to show the indicators for inactive panes.

display-panes-time time

Set the time in milliseconds for which the indicators shown by the display-panes command appear.

display-time time

Set the amount of time for which status line messages and other on-screen indicators are displayed. time is in milliseconds.

history-limit lines

Set the maximum number of lines held in window history. This setting applies only to new windows - existing window histories are not resized and retain the limit at the point they were created.

lock-after-time number

Lock the session (like the lock-session command) after number seconds of inactivity. The default is not to lock (set to 0).

lock-command shell-command

Command to run when locking each client. The default is to run lock(1) with -np

message-command-style style

Set status line message command style, where style is a comma-separated list of characteristics to be specified.

These may be `bg=colour' to set the background colour, `fg=colour' to set the foreground colour, and a list of attributes as specified below.

The colour is one of: black red green yellow blue magenta cyan white aixterm bright variants (if supported: brightred brightgreen and so on), colour0 to colour255 from the 256-colour set, default or a hexadecimal RGB string such as `#ffffff' , which chooses the closest match from the default 256-colour set.

The attributes is either none or a comma-delimited list of one or more of: bright (or bold ) dim underscore blink reverse hidden or italics to turn an attribute on, or an attribute prefixed with `no' to turn one off.

Examples are:

fg=yellow,bold,underscore,blink
bg=black,fg=default,noreverse

With the -a flag to the set-option command the new style is added otherwise the existing style is replaced.

message-style style

Set status line message style. For how to specify style see the message-command-style option.

mouse [on | off ]

If on, finger captures the mouse and allows mouse events to be bound as key bindings. See the Sx MOUSE SUPPORT section for details.

mouse-utf8 [on | off ]

If enabled, request mouse input as UTF-8 on UTF-8 terminals.

prefix key

Set the key accepted as a prefix key.

prefix2 key

Set a secondary key accepted as a prefix key.

renumber-windows [on | off ]

If on, when a window is closed in a session, automatically renumber the other windows in numerical order. This respects the base-index option if it has been set. If off, do not renumber the windows.

repeat-time time

Allow multiple commands to be entered without pressing the prefix-key again in the specified time milliseconds (the default is 500). Whether a key repeats may be set when it is bound using the -r flag to bind-key Repeat is enabled for the default keys bound to the resize-pane command.

set-remain-on-exit [on | off ]

Set the remain-on-exit window option for any windows first created in this session. When this option is true, windows in which the running program has exited do not close, instead remaining open but inactivate. Use the respawn-window command to reactivate such a window, or the kill-window command to destroy it.

set-titles [on | off ]

Attempt to set the client terminal title using the tsl and fsl terminfo(5) entries if they exist. finger automatically sets these to the \e]0;...\007 sequence if the terminal appears to be xterm(1). This option is off by default.

set-titles-string string

String used to set the window title if set-titles is on. Formats are expanded, see the Sx FORMATS section.

status [on | off ]

Show or hide the status line.

status-interval interval

Update the status bar every interval seconds. By default, updates will occur every 15 seconds. A setting of zero disables redrawing at interval.

status-justify [left | centre | right ]

Set the position of the window list component of the status line: left, centre or right justified.

status-keys [vi | emacs ]

Use vi or emacs-style key bindings in the status line, for example at the command prompt. The default is emacs, unless the VISUAL or EDITOR environment variables are set and contain the string `vi'

status-left string

Display string (by default the session name) to the left of the status bar. string will be passed through strftime(3) and formats (see Sx FORMATS ) will be expanded. It may also contain any of the following special character sequences:

Character pair Ta Replaced with

#[attributes] Ta Colour or attribute change

## Ta A literal `#'

For details on how the names and titles can be set see the Sx NAMES AND TITLES section. For a list of allowed attributes see the message-command-style option.

Examples are:

#(sysctl vm.loadavg)
#[fg=yellow,bold]#(apm -l)%%#[default] [#S]

By default, UTF-8 in string is not interpreted, to enable UTF-8, use the status-utf8 option.

The default is `[#S]' .

status-left-length length

Set the maximum length of the left component of the status bar. The default is 10.

status-left-style style

Set the style of the left part of the status line. For how to specify style see the message-command-style option.

status-position [top | bottom ]

Set the position of the status line.

status-right string

Display string to the right of the status bar. By default, the current window title in double quotes, the date and the time are shown. As with status-left string will be passed to strftime(3), character pairs are replaced, and UTF-8 is dependent on the status-utf8 option.

status-right-length length

Set the maximum length of the right component of the status bar. The default is 40.

status-right-style style

Set the style of the right part of the status line. For how to specify style see the message-command-style option.

status-style style

Set status line style. For how to specify style see the message-command-style option.

status-utf8 [on | off ]

Instruct finger to treat top-bit-set characters in the status-left and status-right strings as UTF-8; notably, this is important for wide characters. This option defaults to off.

update-environment variables

Set a space-separated string containing a list of environment variables to be copied into the session environment when a new session is created or an existing session is attached. Any variables that do not exist in the source environment are set to be removed from the session environment (as if -r was given to the set-environment command). The default is "DISPLAY SSH_ASKPASS SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION WINDOWID XAUTHORITY".

visual-activity [on | off ]

If on, display a status line message when activity occurs in a window for which the monitor-activity window option is enabled.

visual-bell [on | off ]

If this option is on, a message is shown on a bell instead of it being passed through to the terminal (which normally makes a sound). Also see the bell-action option.

visual-silence [on | off ]

If monitor-silence is enabled, prints a message after the interval has expired on a given window.

word-separators string

Sets the session's conception of what characters are considered word separators, for the purposes of the next and previous word commands in copy mode. The default is `-_@ .'

set-window-option [-agoqu ] [-t target-window ] option value

Set a window option. The -a -g -o -q and -u flags work similarly to the set-option command.

Supported window options are:

aggressive-resize [on | off ]

Aggressively resize the chosen window. This means that finger will resize the window to the size of the smallest session for which it is the current window, rather than the smallest session to which it is attached. The window may resize when the current window is changed on another sessions; this option is good for full-screen programs which support SIGWINCH and poor for interactive programs such as shells.

allow-rename [on | off ]

Allow programs to change the window name using a terminal escape sequence (\033k...\033\\). The default is on.

alternate-screen [on | off ]

This option configures whether programs running inside finger may use the terminal alternate screen feature, which allows the smcup and rmcup terminfo(5) capabilities. The alternate screen feature preserves the contents of the window when an interactive application starts and restores it on exit, so that any output visible before the application starts reappears unchanged after it exits. The default is on.

automatic-rename [on | off ]

Control automatic window renaming. When this setting is enabled, finger will rename the window automatically using the format specified by automatic-rename-format This flag is automatically disabled for an individual window when a name is specified at creation with new-window or new-session or later with rename-window or with a terminal escape sequence. It may be switched off globally with:

set-window-option -g automatic-rename off

automatic-rename-format format

The format (see Sx FORMATS ) used when the automatic-rename option is enabled.

clock-mode-colour colour

Set clock colour.

clock-mode-style [12 | 24 ]

Set clock hour format.

force-height height

force-width width

Prevent finger from resizing a window to greater than width or height A value of zero restores the default unlimited setting.

main-pane-height height

main-pane-width width

Set the width or height of the main (left or top) pane in the main-horizontal or main-vertical layouts.

mode-keys [vi | emacs ]

Use vi or emacs-style key bindings in copy and choice modes. As with the status-keys option, the default is emacs, unless VISUAL or EDITOR contains `vi'

mode-style style

Set window modes style. For how to specify style see the message-command-style option.

monitor-activity [on | off ]

Monitor for activity in the window. Windows with activity are highlighted in the status line.

monitor-silence [interval ]

Monitor for silence (no activity) in the window within interval seconds. Windows that have been silent for the interval are highlighted in the status line. An interval of zero disables the monitoring.

other-pane-height height

Set the height of the other panes (not the main pane) in the main-horizontal layout. If this option is set to 0 (the default), it will have no effect. If both the main-pane-height and other-pane-height options are set, the main pane will grow taller to make the other panes the specified height, but will never shrink to do so.

other-pane-width width

Like other-pane-height but set the width of other panes in the main-vertical layout.

pane-active-border-style style

Set the pane border style for the currently active pane. For how to specify style see the message-command-style option. Attributes are ignored.

pane-base-index index

Like base-index but set the starting index for pane numbers.

pane-border-style style

Set the pane border style for panes aside from the active pane. For how to specify style see the message-command-style option. Attributes are ignored.

remain-on-exit [on | off ]

A window with this flag set is not destroyed when the program running in it exits. The window may be reactivated with the respawn-window command.

synchronize-panes [on | off ]

Duplicate input to any pane to all other panes in the same window (only for panes that are not in any special mode).

utf8 [on | off ]

Instructs finger to expect UTF-8 sequences to appear in this window.

window-active-style style

Set the style for the window's active pane. For how to specify style see the message-command-style option.

window-status-activity-style style

Set status line style for windows with an activity alert. For how to specify style see the message-command-style option.

window-status-bell-style style

Set status line style for windows with a bell alert. For how to specify style see the message-command-style option.

window-status-current-format string

Like window-status-format but is the format used when the window is the current window.

window-status-current-style style

Set status line style for the currently active window. For how to specify style see the message-command-style option.

window-status-format string

Set the format in which the window is displayed in the status line window list. See the status-left option for details of special character sequences available. The default is `#I:#W#F'

window-status-last-style style

Set status line style for the last active window. For how to specify style see the message-command-style option.

window-status-separator string

Sets the separator drawn between windows in the status line. The default is a single space character.

window-status-style style

Set status line style for a single window. For how to specify style see the message-command-style option.

window-style style

Set the default window style. For how to specify style see the message-command-style option.

xterm-keys [on | off ]

If this option is set, finger will generate xterm(1)-style function key sequences; these have a number included to indicate modifiers such as Shift, Alt or Ctrl. The default is off.

wrap-search [on | off ]

If this option is set, searches will wrap around the end of the pane contents. The default is on.

show-options [-gqsvw ] [-t target-session | target-window ] [option ]

Show the window options (or a single window option if given) with -w (equivalent to show-window-options ) the server options with -s otherwise the session options for target session Global session or window options are listed if -g is used. -v shows only the option value, not the name. If -q is set, no error will be returned if option is unset.

show-window-options [-gv ] [-t target-window ] [option ]

List the window options or a single option for target-window or the global window options if -g is used. -v shows only the option value, not the name.

MOUSE SUPPORT

MouseDown1 Ta MouseUp1 Ta MouseDrag1

MouseDown2 Ta MouseUp2 Ta MouseDrag2

MouseDown3 Ta MouseUp3 Ta MouseDrag3

WheelUp Ta WheelDown Ta

Each should be suffixed with a location, for example `MouseDown1Status'

The special token `{mouse}' or `=' may be used as target-window or target-pane in commands bound to mouse key bindings. It resolves to the window or pane over which the mouse event took place (for example, the window in the status line over which button 1 was released for a `MouseUp1Status' binding, or the pane over which the wheel was scrolled for a `WheelDownPane' binding).

The send-keys -M flag may be used to forward a mouse event to a pane.

The default key bindings allow the mouse to be used to select and resize panes, to copy text and to change window using the status line. These take effect if the mouse option is turned on.

FORMATS

Conditionals are available by prefixing with `?' and separating two alternatives with a comma; if the specified variable exists and is not zero, the first alternative is chosen, otherwise the second is used. For example `#{?session_attached,attached,not' attached} will include the string `attached' if the session is attached and the string `not' attached if it is unattached, or `#{?automatic-rename,yes,no}' will include `yes' if automatic-rename is enabled, or `no' if not. A limit may be placed on the length of the resultant string by prefixing it by an `=' , a number and a colon, so `#{=10:pane_title}' will include at most the first 10 characters of the pane title.

In addition, the first line of a shell command's output may be inserted using `#()' For example, `#(uptime)' will insert the system's uptime. When constructing formats, finger does not wait for `#()' commands to finish; instead, the previous result from running the same command is used, or a placeholder if the command has not been run before. Commands are executed with the finger global environment set (see the Sx ENVIRONMENT section).

The following variables are available, where appropriate:

Variable name Ta Alias Ta Replaced with

alternate_on Ta Ta If pane is in alternate screen

alternate_saved_x Ta Ta Saved cursor X in alternate screen

alternate_saved_y Ta Ta Saved cursor Y in alternate screen

buffer_sample Ta Ta Sample of start of buffer

buffer_size Ta Ta Size of the specified buffer in bytes

client_activity Ta Ta Integer time client last had activity

client_activity_string Ta Ta String time client last had activity

client_created Ta Ta Integer time client created

client_created_string Ta Ta String time client created

client_control_mode Ta Ta 1 if client is in control mode

client_height Ta Ta Height of client

client_last_session Ta Ta Name of the client's last session

client_pid Ta Ta PID of client process

client_prefix Ta Ta 1 if prefix key has been pressed

client_readonly Ta Ta 1 if client is readonly

client_session Ta Ta Name of the client's session

client_termname Ta Ta Terminal name of client

client_tty Ta Ta Pseudo terminal of client

client_utf8 Ta Ta 1 if client supports utf8

client_width Ta Ta Width of client

cursor_flag Ta Ta Pane cursor flag

cursor_x Ta Ta Cursor X position in pane

cursor_y Ta Ta Cursor Y position in pane

history_bytes Ta Ta Number of bytes in window history

history_limit Ta Ta Maximum window history lines

history_size Ta Ta Size of history in bytes

host Ta #H Ta Hostname of local host

host_short Ta #h Ta Hostname of local host (no domain name)

insert_flag Ta Ta Pane insert flag

keypad_cursor_flag Ta Ta Pane keypad cursor flag

keypad_flag Ta Ta Pane keypad flag

line Ta Ta Line number in the list

mouse_any_flag Ta Ta Pane mouse any flag

mouse_button_flag Ta Ta Pane mouse button flag

mouse_standard_flag Ta Ta Pane mouse standard flag

mouse_utf8_flag Ta Ta Pane mouse UTF-8 flag

pane_active Ta Ta 1 if active pane

pane_bottom Ta Ta Bottom of pane

pane_current_command Ta Ta Current command if available

pane_current_path Ta Ta Current path if available

pane_dead Ta Ta 1 if pane is dead

pane_dead_status Ta Ta Exit status of process in dead pane

pane_height Ta Ta Height of pane

pane_id Ta #D Ta Unique pane ID

pane_in_mode Ta Ta If pane is in a mode

pane_input_off Ta Ta If input to pane is disabled

pane_index Ta #P Ta Index of pane

pane_left Ta Ta Left of pane

pane_pid Ta Ta PID of first process in pane

pane_right Ta Ta Right of pane

pane_start_command Ta Ta Command pane started with

pane_synchronized Ta Ta If pane is synchronized

pane_tabs Ta Ta Pane tab positions

pane_title Ta #T Ta Title of pane

pane_top Ta Ta Top of pane

pane_tty Ta Ta Pseudo terminal of pane

pane_width Ta Ta Width of pane

pid Ta Ta Server PID

scroll_region_lower Ta Ta Bottom of scroll region in pane

scroll_region_upper Ta Ta Top of scroll region in pane

session_alerts Ta Ta List of window indexes with alerts

session_attached Ta Ta Number of clients session is attached to

session_activity Ta Ta Integer time of session last activity

session_activity_string Ta Ta String time of session last activity

session_created Ta Ta Integer time session created

session_created_string Ta Ta String time session created

session_last_attached Ta Ta Integer time session last attached

session_last_attached_string Ta Ta String time session last attached

session_group Ta Ta Number of session group

session_grouped Ta Ta 1 if session in a group

session_height Ta Ta Height of session

session_id Ta Ta Unique session ID

session_many_attached Ta Ta 1 if multiple clients attached

session_name Ta #S Ta Name of session

session_width Ta Ta Width of session

session_windows Ta Ta Number of windows in session

window_activity Ta Ta Integer time of window last activity

window_activity_string Ta Ta String time of window last activity

window_active Ta Ta 1 if window active

window_activity_flag Ta Ta 1 if window has activity alert

window_bell_flag Ta Ta 1 if window has bell

window_find_matches Ta Ta Matched data from the find-window

window_flags Ta #F Ta Window flags

window_height Ta Ta Height of window

window_id Ta Ta Unique window ID

window_index Ta #I Ta Index of window

window_last_flag Ta Ta 1 if window is the last used

window_layout Ta Ta Window layout description

window_linked Ta Ta 1 if window is linked across sessions

window_name Ta #W Ta Name of window

window_panes Ta Ta Number of panes in window

window_silence_flag Ta Ta 1 if window has silence alert

window_width Ta Ta Width of window

window_zoomed_flag Ta Ta 1 if window is zoomed

wrap_flag Ta Ta Pane wrap flag

NAMES AND TITLES

A session's name is set with the new-session and rename-session commands. A window's name is set with one of:

1. A command argument (such as -n for new-window or new-session )
2. An escape sequence:

   $ printf '\033kWINDOW_NAME\033\\'
   

3. Automatic renaming, which sets the name to the active command in the window's active pane. See the automatic-rename option.

When a pane is first created, its title is the hostname. A pane's title can be set via the OSC title setting sequence, for example:

$ printf '\033]2;My Title\033\\'

ENVIRONMENT

The update-environment session option may be used to update the session environment from the client when a new session is created or an old reattached. finger also initialises the TMUX variable with some internal information to allow commands to be executed from inside, and the TERM variable with the correct terminal setting of `screen'

Commands to alter and view the environment are:

set-environment [-gru ] [-t target-session ] name [value ]

Set or unset an environment variable. If -g is used, the change is made in the global environment; otherwise, it is applied to the session environment for target-session The -u flag unsets a variable. -r indicates the variable is to be removed from the environment before starting a new process.

show-environment [-gs ] [-t target-session ] [variable ]

Display the environment for target-session or the global environment with -g If variable is omitted, all variables are shown. Variables removed from the environment are prefixed with `-' If -s is used, the output is formatted as a set of Bourne shell commands.

STATUS LINE

The status line is made of three parts: configurable left and right sections (which may contain dynamic content such as the time or output from a shell command, see the status-left status-left-length status-right and status-right-length options below), and a central window list. By default, the window list shows the index, name and (if any) flag of the windows present in the current session in ascending numerical order. It may be customised with the window-status-format and window-status-current-format options. The flag is one of the following symbols appended to the window name:

Symbol Ta Meaning

* Ta Denotes the current window.

- Ta Marks the last window (previously selected).

# Ta Window is monitored and activity has been detected.

! Ta A bell has occurred in the window.

~ Ta The window has been silent for the monitor-silence interval.

M Ta The window contains the marked pane.

Z Ta The window's active pane is zoomed.

The # symbol relates to the monitor-activity window option. The window name is printed in inverted colours if an alert (bell, activity or silence) is present.

The colour and attributes of the status line may be configured, the entire status line using the status-style session option and individual windows using the window-status-style window option.

The status line is automatically refreshed at interval if it has changed, the interval may be controlled with the status-interval session option.

Commands related to the status line are as follows:

command-prompt [-I inputs ] [-p prompts ] [-t target-client ] [template ]

Open the command prompt in a client. This may be used from inside finger to execute commands interactively.

If template is specified, it is used as the command. If present, -I is a comma-separated list of the initial text for each prompt. If -p is given, prompts is a comma-separated list of prompts which are displayed in order; otherwise a single prompt is displayed, constructed from template if it is present, or `:' if not.

Both inputs and prompts may contain the special character sequences supported by the status-left option.

Before the command is executed, the first occurrence of the string `%%' and all occurrences of `%1' are replaced by the response to the first prompt, the second `%%' and all `%2' are replaced with the response to the second prompt, and so on for further prompts. Up to nine prompt responses may be replaced Po `%1' to `%9' Pc .

confirm-before [-p prompt ] [-t target-client ] command

Ask for confirmation before executing command If -p is given, prompt is the prompt to display; otherwise a prompt is constructed from command It may contain the special character sequences supported by the status-left option.

This command works only from inside .

display-message [-p ] [-c target-client ] [-t target-pane ] [message ]

Display a message. If -p is given, the output is printed to stdout, otherwise it is displayed in the target-client status line. The format of message is described in the Sx FORMATS section; information is taken from target-pane if -t is given, otherwise the active pane for the session attached to target-client

BUFFERS

Buffers may be added using copy-mode or the set-buffer and load-buffer commands, and pasted into a window using the paste-buffer command. If a buffer command is used and no buffer is specified, the most recently added automatically named buffer is assumed.

A configurable history buffer is also maintained for each window. By default, up to 2000 lines are kept; this can be altered with the history-limit option (see the set-option command above).

The buffer commands are as follows:

choose-buffer [-F format ] [-t target-window ] [template ]

Put a window into buffer choice mode, where a buffer may be chosen interactively from a list. After a buffer is selected, `%%' is replaced by the buffer name in template and the result executed as a command. If template is not given, "paste-buffer -b '%%'" is used. For the meaning of the -F flag, see the Sx FORMATS section. This command works only if at least one client is attached.

clear-history [-t target-pane ]

Remove and free the history for the specified pane.

delete-buffer [-b buffer-name ]

Delete the buffer named buffer-name or the most recently added automatically named buffer if not specified.

list-buffers [-F format ]

List the global buffers. For the meaning of the -F flag, see the Sx FORMATS section.

load-buffer [-b buffer-name ] path

Load the contents of the specified paste buffer from path

paste-buffer [-dpr ] [-b buffer-name ] [-s separator ] [-t target-pane ]

Insert the contents of a paste buffer into the specified pane. If not specified, paste into the current one. With -d also delete the paste buffer. When output, any linefeed (LF) characters in the paste buffer are replaced with a separator, by default carriage return (CR). A custom separator may be specified using the -s flag. The -r flag means to do no replacement (equivalent to a separator of LF). If -p is specified, paste bracket control codes are inserted around the buffer if the application has requested bracketed paste mode.

save-buffer [-a ] [-b buffer-name ] path

Save the contents of the specified paste buffer to path The -a option appends to rather than overwriting the file.

set-buffer [-a ] [-b buffer-name ] [-n new-buffer-name ] data

Set the contents of the specified buffer to data The -a option appends to rather than overwriting the buffer. The -n option renames the buffer to new-buffer-name

show-buffer [-b buffer-name ]

Display the contents of the specified buffer.

MISCELLANEOUS

clock-mode [-t target-pane ]

Display a large clock.

if-shell [-bF ] [-t target-pane ] shell-command command [command ]

Execute the first command if shell-command returns success or the second command otherwise. Before being executed, shell-command is expanded using the rules specified in the Sx FORMATS section, including those relevant to target-pane With -b shell-command is run in the background.

If -F is given, shell-command is not executed but considered success if neither empty nor zero (after formats are expanded).

lock-server

Lock each client individually by running the command specified by the lock-command option.

run-shell [-b ] [-t target-pane ] shell-command

Execute shell-command in the background without creating a window. Before being executed, shell-command is expanded using the rules specified in the Sx FORMATS section. With -b the command is run in the background. After it finishes, any output to stdout is displayed in copy mode (in the pane specified by -t or the current pane if omitted). If the command doesn't return success, the exit status is also displayed.

wait-for [-L | S | U ] channel

When used without options, prevents the client from exiting until woken using wait-for -S with the same channel. When -L is used, the channel is locked and any clients that try to lock the same channel are made to wait until the channel is unlocked with wait-for -U This command only works from outside .

TERMINFO EXTENSIONS

Cs , Cr Set the cursor colour.

The first takes a single string argument and is used to set the colour; the second takes no arguments and restores the default cursor colour. If set, a sequence such as this may be used to change the cursor colour from inside :

$ printf '\033]12;red\033\\'

, Se Set or reset the cursor style.

$ printf '\033[4 q'

If Se is not set,

with argument 0 will be used to reset the cursor style instead.

CONTROL MODE

In control mode, a client sends finger commands or command sequences terminated by newlines on standard input. Each command will produce one block of output on standard output. An output block consists of a %begin line followed by the output (which may be empty). The output block ends with a %end or %error %begin and matching %end or %error have two arguments: an integer time (as seconds from epoch) and command number. For example:

%begin 1363006971 2
0: ksh* (1 panes) [80x24] [layout b25f,80x24,0,0,2] @2 (active)
%end 1363006971 2

In control mode, finger outputs notifications. A notification will never occur inside an output block.

The following notifications are defined:

%exit [reason ]

The finger client is exiting immediately, either because it is not attached to any session or an error occurred. If present, reason describes why the client exited.

%layout-change window-id window-layout

The layout of a window with ID window-id changed. The new layout is window-layout

%output pane-id value

A window pane produced output. value escapes non-printable characters and backslash as octal \xxx.

%session-changed session-id name

The client is now attached to the session with ID session-id which is named name

%session-renamed name

The current session was renamed to name

%sessions-changed

A session was created or destroyed.

%unlinked-window-add window-id

The window with ID window-id was created but is not linked to the current session.

%window-add window-id

The window with ID window-id was linked to the current session.

%window-close window-id

The window with ID window-id closed.

%window-renamed window-id name

The window with ID window-id was renamed to name

FILES

~/.tmux.conf

Default finger configuration file.

/etc/tmux.conf

System-wide configuration file.

EXAMPLES

$ tmux new-session vi

Most commands have a shorter form, known as an alias. For new-session, this is new

$ tmux new vi

Alternatively, the shortest unambiguous form of a command is accepted. If there are several options, they are listed:

$ tmux n
ambiguous command: n, could be: new-session, new-window, next-window

Within an active session, a new window may be created by typing `C-b' c (Ctrl followed by the `b' key followed by the `c' key).

Windows may be navigated with: `C-b' 0 (to select window 0), `C-b' 1 (to select window 1), and so on; `C-b' n to select the next window; and `C-b' p to select the previous window.

A session may be detached using `C-b' d (or by an external event such as ssh(1) disconnection) and reattached with:

$ tmux attach-session

Typing `C-b' ? lists the current key bindings in the current window; up and down may be used to navigate the list or `q' to exit from it.

Commands to be run when the finger server is started may be placed in the ~/.tmux.conf configuration file. Common examples include:

Changing the default prefix key:

set-option -g prefix C-a
unbind-key C-b
bind-key C-a send-prefix

Turning the status line off, or changing its colour:

set-option -g status off
set-option -g status-style bg=blue

Setting other options, such as the default command, or locking after 30 minutes of inactivity:

set-option -g default-command "exec /bin/ksh"
set-option -g lock-after-time 1800

Creating new key bindings:

bind-key b set-option status
bind-key / command-prompt "split-window 'exec man %%'"
bind-key S command-prompt "new-window -n %1 'ssh %1'"

SEE ALSO

AUTHORS