rrdgraph_graph (1)
Leading comments
Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35) Standard preamble: ========================================================================
NAME
rrdgraph_graph - rrdtool graph command referenceSYNOPSIS
DESCRIPTION
These instructions allow you to generate your image or report. If you don't use any graph elements, no graph is generated. Similarly, no report is generated if you don't use print options.PRINT
Depending on the context, either the value component (no suffix, valstrftime or valstrfduration) or the time component (strftime) of a
Any text in format is printed literally with one exception: The percent character introduces a formatter string. This string can be:
For printing values:
- %%
- just prints a literal '%' character
- %#.#le
- prints numbers like 1.2346e+04. The optional integers # denote field width and decimal precision.
- %#.#lf
- prints numbers like 12345.6789 (%5.4lf), with optional field width and precision.
- %s
-
place this after %le, %lf or %lg. This will be replaced by the
appropriate SImagnitude unit and the value will be scaled accordingly (123456 -> 123.456 k).
- %S
- is similar to %s. It does, however, use a previously defined magnitude unit. If there is no such unit yet, it tries to define one (just like %s) unless the value is zero, in which case the magnitude unit stays undefined. Thus, formatter strings using %S and no %s will all use the same magnitude unit except for zero values.
If you
- %a
- The abbreviated weekday name according to the current locale.
- %A
- The full weekday name according to the current locale.
- %b
- The abbreviated month name according to the current locale.
- %B
- The full month name according to the current locale.
- %c
- The preferred date and time representation for the current locale.
- %d
- The day of the month as a decimal number (range 01 to 31).
- %H
- The hour as a decimal number using a 24-hour clock (range 00 to 23).
- %I
- The hour as a decimal number using a 12-hour clock (range 01 to 12).
- %j
- The day of the year as a decimal number (range 001 to 366).
- %m
- The month as a decimal number (range 01 to 12).
- %M
- The minute as a decimal number (range 00 to 59).
- %p
-
Either `AM' or `PM' according to the given time value, or the corresponding strings for the current locale. Noon is treated as `pm' and midnight as `am'. Note that in many locales and `pm' notation is unsupported and in such cases %p will return an empty string.
- %s
- The second as a decimal number (range 00 to 61).
- %S
- The seconds since the epoch (1.1.1970) (libc dependent non standard!)
- %U
- The week number of the current year as a decimal number, range 00 to 53, starting with the first Sunday as the first day of week 01. See also %V and %W.
- %V
-
The ISO 8601:1988week number of the current year as a decimal number, range 01 to 53, where week 1 is the first week that has at least 4 days in the current year, and with Monday as the first day of the week. See also %U and %W.
- %w
- The day of the week as a decimal, range 0 to 6, Sunday being 0. See also %u.
- %W
- The week number of the current year as a decimal number, range 00 to 53, starting with the first Monday as the first day of week 01.
- %x
- The preferred date representation for the current locale without the time.
- %X
- The preferred time representation for the current locale without the date.
- %y
- The year as a decimal number without a century (range 00 to 99).
- %Y
- The year as a decimal number including the century.
- %Z
- The time zone or name or abbreviation.
- %%
- A literal `%' character.
Formatting values as duration is done using printf like conversion specifications:
- All non-conversion specification chars are copied unchanged - A conversion specification has format '%' [ ['0'] minwidth ] [ '.' precision ] conversion-specifier
With conversion-specifier being one of:
- %
- A raw '%' is output, width and precision are ignored
- W
- Number of weeks
- d
- Number of days, modulus number of weeks
- D
- Number of days
- h
- Number of hours, modulus number of days
- H
- Number of hours
- m
- Number of minutes, modulus number of hours
- M
- Number of minutes
- s
- Number of seconds, modulus number of minutes
- S
- Number of seconds
- f
- Number of milliseconds, modulus seconds
Deprecated. Use the new form of this command in new scripts. The first form of this command is to be used with
GRAPH
This is the same as "PRINT", but printed inside the graph.
Deprecated. Use the new form of this command in new scripts. This is the same as "PRINT", but printed inside the graph.
Text is printed literally in the legend section of the graph. Note that in RRDtool 1.2 you have to escape colons in
Draw a vertical line at time. Its color is composed from three hexadecimal numbers specifying the rgb color components (00 is off,
Draw a horizontal line at value.
Draw a line of the specified width onto the graph. width can be a floating point number. If the color is not specified, the drawing is done 'invisibly'. This is useful when stacking something else on top of this line. Also optional is the legend box and string which will be printed in the legend section if specified. The value can be generated by
Normally the graphing function makes sure that the entire
The dashes modifier enables dashed line style. Without any further options a symmetric dashed line with a segment length of 5 pixels will be drawn. The dash pattern can be changed if the dashes= parameter is followed by either one value or an even number (1, 2, 4, 6, ...) of positive values. Each value provides the length of alternate on_s and off_s portions of the stroke. The dash-offset parameter specifies an offset into the pattern at which the stroke begins.
When you do not specify a color, you cannot specify a legend. Should you want to use
See
If color2 is specified, the area will be filled with a gradient.
The gradheight parameter can create three different behaviors. If gradheight > 0, then the gradient is a fixed height, starting at the line going down. If gradheight < 0, then the gradient starts at a fixed height above the x-axis, going down to the x-axis. If height == 0, then the gradient goes from the line to x-axis.
The default value for gradheight is 50.
Plot a tick mark (a vertical line) for each value of vname that is non-zero and not *UNKNOWN*. The fraction argument specifies the length of the tick mark as a fraction of the y-axis; the default value is 0.1 (10% of the axis). Note that the color specification is not optional. The
Using this command RRDtool will graph the following elements with the specified offset. For instance, you can specify an offset of ( 7*24*60*60 = ) 604'800 seconds to ``look back'' one week. Make sure to tell the viewer of your graph you did this ... As with the other graphing elements, you can specify a number or a variable here.
Labels are placed below the graph. When they overflow to the left, they wrap to the next line. By default, lines are justified left and right. The
Deprecated. Use the
Some notes on stacking
When stacking, an element is not placed above the X-axis but rather on top of the previous element. There must be something to stack upon.
You can use an invisible
An unknown value makes the entire stack unknown from that moment on. You don't know where to begin (the unknown value) and therefore do not know where to end.
If you want to make sure you will be displaying a certain variable, make sure never to stack upon the unknown value. Use a
NOTES on legend arguments
Escaping the colon
A colon ':' in a legend argument will mark the end of the legend. To enter a ':' as part of a legend, the colon must be escaped with a backslash '\:'. Beware that many environments process backslashes themselves, so it may be necessary to write two backslashes in order to one being passed onto rrd_graph.String Formatting
The text printed below the actual graph can be formatted by appending special escape characters at the end of a text. When ever such a character occurs, all pending text is pushed onto the graph according to the character specified.Valid markers are: \j for justified, \l for left aligned, \r for right aligned, and \c for centered. In the next section there is an example showing how to use centered formatting.
\n is a valid alias for \l since incomplete parsing in earlier versions of RRDtool lead to this behavior and a number of people has been using it.
Normally there are two space characters inserted between every two items printed into the graph. The space following a string can be suppressed by putting a \g at the end of the string. The \g also ignores any space inside the string if it is at the very end of the string. This can be used in connection with %s to suppress empty unit strings.
GPRINT:a:MAX:%lf%s\g
A special case is
If you want to have left and right aligned legends on the same line use
COMMENT:left\l COMMENT:\u COMMENT:right\r
There is also a 'nop' control for situations where you want a string to actually end in a backslash character sequence \.
COMMENT:OS\2\.
When using a proportional font in your graph, the tab characters or the sequence \t will line-up legend elements. Note that the tabs inserted are relative to the start of the current legend element!
Since RRDtool 1.3 is using Pango for rending text, you can use Pango markup. Pango uses the xml span tags for inline formatting instructions.:
A simple example of a marked-up string might be:
<span foreground="blue" size="x-large">Blue text</span> is <i>cool</i>!
The complete list of attributes for the span tag (taken from the pango documentation):
- font_desc
- A font description string, such as ``Sans Italic 12''; note that any other span attributes will override this description. So if you have ``Sans Italic'' and also a style=``normal'' attribute, you will get Sans normal, not italic.
- font_family
- A font family name
- face
- Synonym for font_family
- size
- Font size in 1024ths of a point, or one of the absolute sizes 'xx-small', 'x-small', 'small', 'medium', 'large', 'x-large', 'xx-large', or one of the relative sizes 'smaller' or 'larger'. If you want to specify a absolute size, it's usually easier to take advantage of the ability to specify a partial font description using 'font_desc'; you can use font_desc='12.5' rather than size='12800'.
- style
- One of 'normal', 'oblique', 'italic'
- weight
- One of 'ultralight', 'light', 'normal', 'bold', 'ultrabold', 'heavy', or a numeric weight
- variant
- 'normal' or 'smallcaps'
- stretch
- One of 'ultracondensed', 'extracondensed', 'condensed', 'semicondensed', 'normal', 'semiexpanded', 'expanded', 'extraexpanded', 'ultraexpanded'
- foreground
-
An RGBcolor specification such as '#00FF00' or a color name such as 'red'
- background
-
An RGBcolor specification such as '#00FF00' or a color name such as 'red'
- underline
- One of 'none', 'single', 'double', 'low', 'error'
- underline_color
-
The color of underlines; an RGBcolor specification such as '#00FF00' or a color name such as 'red'
- rise
- Vertical displacement, in 10000ths of an em. Can be negative for subscript, positive for superscript.
- strikethrough
- 'true' or 'false' whether to strike through the text
- strikethrough_color
-
The color of crossed out lines; an RGBcolor specification such as '#00FF00' or a color name such as 'red'
- fallback
- 'true' or 'false' whether to enable fallback. If disabled, then characters will only be used from the closest matching font on the system. No fallback will be done to other fonts on the system that might contain the characters in the text. Fallback is enabled by default. Most applications should not disable fallback.
- lang
- A language code, indicating the text language
- letter_spacing
- Inter-letter spacing in 1024ths of a point.
- gravity
- One of 'south', 'east', 'north', 'west', 'auto'.
- gravity_hint
- One of 'natural', 'strong', 'line'.
To save you some typing, there are also some shortcuts:
- b
- Bold
- big
- Makes font relatively larger, equivalent to <span size=``larger''>
- i
- Italic
- s
- Strike through
- sub
- Subscript
- sup
- Superscript
- small
- Makes font relatively smaller, equivalent to <span size=``smaller''>
- tt
- Monospace font
- u
- Underline
SEE ALSO
rrdgraph gives an overview of how rrdtool graph works. rrdgraph_data describesMake sure to read rrdgraph_examples for tips&tricks.
AUTHOR
Program by Tobias Oetiker <tobi@oetiker.ch>This manual page by Alex van den Bogaerdt <alex@vandenbogaerdt.nl> with corrections and/or additions by several people