r.stream.extract (1)
NAME
r.stream.extract - Performs stream network extraction.
KEYWORDS
raster, hydrology, stream network
SYNOPSIS
r.stream.extract
r.stream.extract --help
r.stream.extract elevation=name [accumulation=name] [depression=name] threshold=float [d8cut=float] [mexp=float] [stream_length=integer] [memory=integer] [stream_raster=name] [stream_vector=name] [direction=name] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog
Parameters:
elevation=name [required]
Name of input elevation raster map
accumulation=name
Name of input accumulation raster map
Stream extraction will use provided accumulation instead of calculating it anew
depression=name
Name of input raster map with real depressions
Streams will not be routed out of real depressions
threshold=float [required]
Minimum flow accumulation for streams
Must be > 0
d8cut=float
Use SFD above this threshold
If accumulation is larger than d8cut, SFD is used instead of MFD. Applies only if no accumulation map is given.
Default: infinity
mexp=float
Montgomery exponent for slope, disabled with 0
Montgomery: accumulation is multiplied with pow(slope,mexp) and then compared with threshold
Default: 0
stream_length=integer
Delete stream segments shorter than stream_length cells
Applies only to first-order stream segments (springs/stream heads)
Default: 0
memory=integer
Maximum memory to be used (in MB)
Cache size for raster rows
Default: 300
stream_raster=name
Name for output raster map with unique stream ids
stream_vector=name
Name for output vector map with unique stream ids
direction=name
Name for output raster map with flow direction
DESCRIPTION
r.stream.extract extracts streams in both raster and vector format from a required input elevation map and optional input accumulation map.
NOTES
NULL (nodata) cells in the input elevation map are ignored, zero and negative values are valid elevation data. Gaps in the elevation map that are located within the area of interest must be filled beforehand, e.g. with r.fillnulls, to avoid distortions.
All non-NULL and non-zero cells of depression map will be regarded as real depressions. Streams will not be routed out of depressions. If an area is marked as depression but the elevation model has no depression at this location, streams will not stop there. If a flow accumulation map and a map with real depressions are provided, the flow accumulation map must match the depression map such that flow is not distributed out of the indicated depressions. It is recommended to use internally computed flow accumulation if a depression map is provided.
Option threshold defines the minimum (optionally modified) flow accumulation value that will initiate a new stream. If Montgomery's method for channel initiation is used, the cell value of the accumulation input map is multiplied by (tan(local slope))mexp and then compared to threshold. If mexp is given than the method of Montgomery and Foufoula-Georgiou (1993) to initiate a stream with this value. The cell value of the accumulation input map is multiplied by (tan(local slope))mexp and then compared to threshold. If threshold is reached or exceeded, a new stream is initiated. The default value 0 disables Montgomery. Montgomery and Foufoula-Georgiou (1993) generally recommend to use 2.0 as exponent. mexp values closer to 0 will produce streams more similar to streams extracted with Montgomery disabled. Larger mexp values decrease the number of streams in flat areas and increase the number of streams in steep areas. If weight is given, the weight is applied first.
Option d8cut defines minimum amount of overland flow (accumulation) when SFD (D8) will be used instead of MFD (FD8) to calculate flow accumulation. Only applies if no accumulation map is provided. Setting to 0 disables MFD completely.
Option stream_length defines minimum stream length in number of cells for first-order (head/spring) stream segments. All first-order stream segments shorter than stream_length will be deleted.
Output direction raster map contains flow direction for all non-NULL cells in input elevation. Flow direction is of D8 type with a range of 1 to 8. Multiplying values with 45 gives degrees CCW from East. Flow direction was adjusted during thinning, taking shortcuts and skipping cells that were eliminated by the thinning procedure.
Stream extraction
If no accumulation input map is provided, flow accumulation is determined with a hydrological analysis similar to r.watershed. The algorithm is MFD (FD8) after Holmgren 1994, as for r.watershed. The threshold option determines the number of streams and detail of stream networks. Whenever flow accumulation reaches threshold, a new stream is started and traced downstream to its outlet point. As for r.watershed, flow accumulation is calculated as the number of cells draining through a cell.
If accumulation is given than the accumulation values of the provided accumulation map are used and not calculated from the input elevation map. In this case the elevation map must be exactly the same map used to calculate accumulation. If accumulation was calculated with r.terraflow, the filled elevation output of r.terraflow must be used. Further on, the current region should be aligned to the accumulation map. Flow direction is first calculated from elevation and then adjusted to accumulation. It is not necessary to provide accumulation as the number of cells, it can also be the optionally adjusted or weighed total contributing area in square meters or any other unit. When an original flow accumulation map is adjusted or weighed, the adjustment or weighing should not convert valid accumulation values to NULL (nodata) values.
In case of getting the error message ERROR: Accumulation raster map is NULL but elevation map is not NULL the computational region must be carefully adjusted to exclude NULL pixels in the accumulation raster map prior to stream extraction.
Weighed flow accumulation
Flow accumulation can be calculated first, e.g. with r.watershed, and then modified before using it as input for r.stream.extract. In its general form, a weighed accumulation map is generated by first creating a weighing map and then multiplying the accumulation map with the weighing map using r.mapcalc. It is highly recommended to evaluate the weighed flow accumulation map first, before using it as input for r.stream.extract.
This allows e.g. to decrease the number of streams in dry areas and increase the number of streams in wet areas by setting weight to smaller than 1 in dry areas and larger than 1 in wet areas.
Another possibility is to restrict channel initiation to valleys determined from terrain morphology. Valleys can be determined with r.param.scale method=crosc (cross-sectional or tangential curvature). Curvature values < 0 indicate concave features, i.e. valleys. The size of the processing window determines whether narrow or broad valleys will be identified (See example below).
Defining a region of interest
The stream extraction procedure can be restricted to a certain region of interest, e.g. a subbasin, by setting the computational region with g.region and/or creating a MASK. Such region of interest should be a complete catchment area, complete in the sense that the complete area upstream of an outlet point is included and buffered with at least one cell.
Stream output
The output raster and vector contains stream segments with unique IDs. Note that these IDs are different from the IDs assigned by r.watershed. The vector output also contains points at the location of the start of a stream segment, at confluences and at stream network outlet locations.
Output stream_raster raster map stores extracted streams. Cell values encode a unique ID for each stream segment.
Output stream_vector vector map stores extracted stream segments and points. Points are written at the start location of each stream segment and at the outlet of a stream network. In layer 1, categories are unique IDs, identical to the cell value of the raster output. The attribute table for layer 1 holds information about the type of stream segment: start segment, or intermediate segment with tributaries. Columns are cat int, stream_type varchar(), type_code int. The encoding for type_code is 0 = start, 1 = intermediate. In layer 2, categories are identical to type_code in layer 1 with additional category 2 = outlet for outlet points. Points with category 1 = intermediate in layer 2 are at the location of confluences.
EXAMPLE
This example is based on the elevation map "elev_ned_30m" in the North Carolina sample dataset and uses valleys determined with r.param.scale to weigh an accumulation map produced with r.watershed.
# set region
g.region -p raster=elev_ned_30m@PERMANENT
# calculate flow accumulation
r.watershed ele=elev_ned_30m@PERMANENT acc=elevation.10m.acc
# curvature to get narrow valleys
r.param.scale input=elev_ned_30m@PERMANENT output=tangential_curv_5 size=5 method=crosc
# curvature to get a bit broader valleys
r.param.scale input=elev_ned_30m@PERMANENT output=tangential_curv_7 size=7 method=crosc
# curvature to get broad valleys
r.param.scale input=elev_ned_30m@PERMANENT output=tangential_curv_11 size=11 method=crosc
# create weight map
r.mapcalc "weight = if(tangential_curv_5 < 0, -100 * tangential_curv_5, \
if(tangential_curv_7 < 0, -100 * tangential_curv_7, \
if(tangential_curv_11 < 0, -100 * tangential_curv_11, 0.000001)))"
# weigh accumulation map
r.mapcalc expr="elev_ned_30m.acc.weighed = elev_ned_30m.acc * weight"
# copy color table from original accumulation map
r.colors map=elev_ned_30m.acc.weighed raster=elev_ned_30m.acc
Weight map (spatial subset with lake in the southern half)
Original flow accumulation map (spatial subset with lake in the southern half)
Weighed flow accumulation map (spatial subset with lake in the southern half)
Display both the original and the weighed accumulation map. Compare them and proceed if the weighed accumulation map makes sense.
# extract streams using the original accumulation map
r.stream.extract elevation=elev_ned_30m@PERMANENT \
accumulation=elev_ned_30m.acc \
threshold=1000 \
stream_rast=elev_ned_30m.streams.noweight
# extract streams from weighed map
r.stream.extract elevation=elev_ned_30m@PERMANENT \
accumulation=elev_ned_30m.acc.weighed \
threshold=1000 \
stream_rast=elev_ned_30m.streams
Now display both stream maps and decide which one is more realistic.
Extracted streams from original flow accumulation map
Extracted streams from weighed flow accumulation map
REFERENCES
o Ehlschlaeger, C. (1989). Using the AT Search Algorithm to Develop Hydrologic Models from Digital Elevation Data, Proceedings of International Geographic Information Systems (IGIS) Symposium '89, pp 275-281 (Baltimore, MD, 18-19 March 1989). URL: http://faculty.wiu.edu/CR-Ehlschlaeger2/older/IGIS/paper.html
o Holmgren, P. (1994). Multiple flow direction algorithms for runoff modelling in grid based elevation models: An empirical evaluation. Hydrological Processes Vol 8(4), pp 327-334. DOI: 10.1002/hyp.3360080405
o Montgomery, D.R., Foufoula-Georgiou, E. (1993). Channel network source representation using digital elevation models. Water Resources Research Vol 29(12), pp 3925-3934.
SEE ALSO
r.mapcalc, r.param.scale, r.stream.channel (Addon), r.stream.distance (Addon), r.stream.order (Addon), r.stream.segment (Addon), r.stream.slope (Addon), r.stream.snap (Addon), r.stream.stats (Addon), r.terraflow, r.thin, r.to.vect, r.watershed
See also r.streams.* modules wiki page.
AUTHOR
Markus Metz
Last changed: $Date: 2017-01-05 08:59:34 +0100 (Thu, 05 Jan 2017) $
SOURCE CODE
Available at: r.stream.extract source code (history)
Main index | Raster index | Topics index | Keywords index | Graphical index | Full index
2003-2017 GRASS Development Team, GRASS GIS 7.2.1 Reference Manual