r.drain (1)
NAME
r.drain - Traces a flow through an elevation model or cost surface on a raster map.
KEYWORDS
raster, hydrology, cost surface
SYNOPSIS
r.drain
r.drain --help
r.drain [-cand] input=name [direction=name] output=name [drain=name] [start_coordinates=east,north] [start_points=name[,name,...]] [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
-c
Copy input cell values on output
-a
Accumulate input values along the path
-n
Count cell numbers along the path
-d
The input raster map is a cost surface (direction surface must also be specified)
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog
Parameters:
input=name [required]
Name of input elevation or cost surface raster map
direction=name
Name of input movement direction map associated with the cost surface
output=name [required]
Name for output raster map
drain=name
Name for output drain vector map
Recommended for cost surface made using knight's move
start_coordinates=east,north
Coordinates of starting point(s) (E,N)
start_points=name[,name,...]
Name of starting vector points map(s)
DESCRIPTION
r.drain traces a flow through a least-cost path in an elevation model or cost surface. For cost surfaces, a movement direction map must be specified with the direction option and the -d flag to trace a flow path following the given directions. Such a movement direction map can be generated with r.walk, r.cost, r.slope.aspect or r.watershed.
The output raster map will show one or more least-cost paths between each user-provided location(s) and the minima (low category values) in the raster input map. If the -d flag is used the output least-cost paths will be found using the direction raster map. By default, the output will be an integer CELL map with category 1 along the least cost path, and null cells elsewhere.
With the -c (copy) flag, the input raster map cell values are copied verbatim along the path. With the -a (accumulate) flag, the accumulated cell value from the starting point up to the current cell is written on output. With either the -c or the -a flags, the output map is created with the same cell type as the input raster map (integer, float or double). With the -n (number) flag, the cells are numbered consecutively from the starting point to the final point. The -c, -a, and -n flags are mutually incompatible.
For an elevation surface, the path is calculated by choosing the steeper "slope" between adjacent cells. The slope calculation accurately acounts for the variable scale in lat-lon projections. For a cost surface, the path is calculated by following the movement direction surface back to the start point given in r.walk or r.cost. The path search stops as soon as a region border or a neighboring NULL cell is encountered, because in these cases the direction can not be determined (the path could continue outside the current region).
The start_coordinates parameter consists of map E and N grid coordinates of a starting point. Each x,y pair is the easting and northing (respectively) of a starting point from which a least-cost corridor will be developed. The start_points parameter can take multiple vector maps containing additional starting points. Up to 1024 starting points can be input from a combination of the start_coordinates and start_points parameters.
NOTES
If no direction input map is given, r.drain currently finds only the lowest point (the cell having the smallest category value) in the input file that can be reached through directly adjacent cells that are less than or equal in value to the cell reached immediately prior to it; therefore, it will not necessarily reach the lowest point in the input file. It currently finds pits in the data, rather than the lowest point in the entire input map. The r.fill.dir, r.terraflow, and r.basins.fill modules can be used to fill in subbasins prior to processing with r.drain.
r.drain will not give sane results at the region boundary. On outer rows and columns bordering the edge of the region, the flow direction is always directly out of the map. In this case, the user could try adjusting the region extents slightly with g.region to allow additional outlet paths for r.drain.
EXAMPLES
Consider the following example:
Input: Output:
ELEVATION SURFACE LEAST COST PATH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 19. 20. 18. 19. 16. 15. 15. . . . . . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 20| 19| 17. 16. 17. 16. 16. . . 1 . 1 . 1 . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 18. 18. 24. 18. 15. 12. 11. . . . . . 1 . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 22. 16. 16. 18. 10. 10. 10. . . . . . 1 . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 15. 15. 15. 10. 8 . 8 . . . . . . . 1 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24. 16. 8 . 7 . 8 . 0 . 12. . . . . . . 1 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 9 . 8 . 7 . 8 . 6 . 12. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The user-provided starting location in the above example is the boxed 19 in the left-hand map. The path in the output shows the least-cost corridor for moving from the starting box to the lowest (smallest) possible point. This is the path a raindrop would take in this landscape.
With the -c (copy) flag, you get the following result:
Input: Output:
ELEVATION SURFACE LEAST COST PATH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 19. 20. 18. 19. 16. 15. 15. . . . . . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 20| 19| 17. 16. 17. 16. 16. . . 19. 17. 16. . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 18. 18. 24. 18. 15. 12. 11. . . . . . 15. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 22. 16. 16. 18. 10. 10. 10. . . . . . 10. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 15. 15. 15. 10. 8 . 8 . . . . . . . 8 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24. 16. 8 . 7 . 8 . 0 .12 . . . . . . . 0 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 9 . 8 . 7 . 8 . 6 .12 . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note that the last 0 will not be put in the null values map.
With the -a (accumulate) flag, you get the following result:
Input: Output:
ELEVATION SURFACE LEAST COST PATH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 19. 20. 18. 19. 16. 15. 15. . . . . . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 20| 19| 17. 16. 17. 16. 16. . . 19. 36. 52. . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 18. 18. 24. 18. 15. 12. 11. . . . . . 67. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 22. 16. 16. 18. 10. 10. 10. . . . . . 77. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 15. 15. 15. 10. 8 . 8 . . . . . . . 85. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24. 16. 8 . 7 . 8 . 0 .12 . . . . . . . 85. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 9 . 8 . 7 . 8 . 6 .12 . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
With the -n (number) flag, you get the following result:
Input: Output:
ELEVATION SURFACE LEAST COST PATH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 19. 20. 18. 19. 16. 15. 15. . . . . . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 20| 19| 17. 16. 17. 16. 16. . . 1 . 2 . 3 . . . .
. . --- . . . . . . . . . . . . . . . . . . . . . . . . .
. 18. 18. 24. 18. 15. 12. 11. . . . . . 4 . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 22. 16. 16. 18. 10. 10. 10. . . . . . 5 . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 15. 15. 15. 10. 8 . 8 . . . . . . . 6 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24. 16. 8 . 7 . 8 . 0 .12 . . . . . . . 7 . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 17. 9 . 8 . 7 . 8 . 6 .12 . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
With the -d (direction) flag, the direction raster is used for the input, rather than the elevation surface. The output is then created according to one of the -can flags.
The directions are recorded as degrees CCW from East:
112.5 67.5 i.e. a cell with the value 135
157.5 135 90 45 22.5 means the next cell is to the North-West
180 x 0
202.5 225 270 315 337.5
247.5 292.5
KNOWN ISSUES
Sometimes, when the differences among integer cell category values in the r.cost cumulative cost surface output are small, this cumulative cost output cannot accurately be used as input to r.drain (r.drain will output bad results). This problem can be circumvented by making the differences between cell category values in the cumulative cost output bigger. It is recommended that if the output from r.cost is to be used as input to r.drain, the user multiply the r.cost input cost surface map by the value of the map's cell resolution, before running r.cost. This can be done using r.mapcalc. The map resolution can be found using g.region. This problem doesn't arise with floating point maps.
SEE ALSO
g.region, r.cost, r.fill.dir, r.basins.fill, r.terraflow, r.mapcalc, r.walk
AUTHORS
Completely rewritten by Roger S. Miller, 2001
July 2004 at WebValley 2004, error checking and vector points added by Matteo Franchi (Liceo Leonardo Da Vinci, Trento) and Roberto Flor (ITC-irst, Trento, Italy)
Last changed: $Date: 2015-05-11 02:11:34 +0200 (Mon, 11 May 2015) $
SOURCE CODE
Available at: r.drain source code (history)
Main index | Raster index | Topics index | Keywords index | Graphical index | Full index
2003-2017 GRASS Development Team, GRASS GIS 7.2.1 Reference Manual