perlunicook • man page

perlunicook (1)

Leading comments

Automatically generated by Pod::Man 4.09 (Pod::Simple 3.35)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man1/perlunicook.1".)

NAME

perlunicook - cookbookish examples of handling Unicode in Perl

DESCRIPTION

This manpage contains short recipes demonstrating how to handle common Unicode operations in Perl, plus one complete program at the end. Any undeclared variables in individual recipes are assumed to have a previous appropriate value in them.

EXAMPLES

X 0: Standard preamble

Unless otherwise notes, all examples below require this standard preamble to work correctly, with the "#!" adjusted to work on your system:

 #!/usr/bin/env perl

 use utf8;      # so literals and identifiers can be in UTF-8
 use v5.12;     # or later to get "unicode_strings" feature
 use strict;    # quote strings, declare variables
 use warnings;  # on by default
 use warnings  qw(FATAL utf8);    # fatalize encoding glitches
 use open      qw(:std :utf8);    # undeclared streams in UTF-8
 use charnames qw(:full :short);  # unneeded in v5.16

This does make even Unix programmers "binmode" your binary streams, or open them with ":raw", but that's the only way to get at them portably anyway.

WARNING

: "use autodie" (pre 2.26) and "use open" do not get along with each other.

X 1: Generic Unicode-savvy filter

Always decompose on the way in, then recompose on the way out.

 use Unicode::Normalize;

 while (<>) {
     $_ = NFD($_);   # decompose + reorder canonically
     ...
 } continue {
     print NFC($_);  # recompose (where possible) + reorder canonically
 }

X 2: Fine-tuning Unicode warnings

As of v5.14, Perl distinguishes three subclasses of

UTFX8

warnings.

 use v5.14;                  # subwarnings unavailable any earlier
 no warnings "nonchar";      # the 66 forbidden non-characters
 no warnings "surrogate";    # UTF-16/CESU-8 nonsense
 no warnings "non_unicode";  # for codepoints over 0x10_FFFF

X 3: Declare source in utf8 for identifiers and literals

Without the all-critical "use utf8" declaration, putting

UTFX8

in your literals and identifiers wonXt work right. If you used the standard preamble just given above, this already happened. If you did, you can do things like this:

 use utf8;

 my $measure   = "A°ngstro.m";
 my @Xsoft     = qw( cp852 cp1251 cp1252 );
 my @XXXXXXXXX = qw( XXXX  XXXXX );
 my @X        = qw( koi8-f koi8-u koi8-r );
 my $motto     = "X X X"; # FAMILY, GROWING HEART, DROMEDARY CAMEL

If you forget "use utf8", high bytes will be misunderstood as separate characters, and nothing will work right.

X 4: Characters and their numbers

The "ord" and "chr" functions work transparently on all codepoints, not just on

ASCII

alone X nor in fact, not even just on Unicode alone.

 # ASCII characters
 ord("A")
 chr(65)

 # characters from the Basic Multilingual Plane
 ord("X")
 chr(0x3A3)

 # beyond the BMP
 ord("X")               # MATHEMATICAL ITALIC SMALL N
 chr(0x1D45B)

 # beyond Unicode! (up to MAXINT)
 ord("\x{20_0000}")
 chr(0x20_0000)

X 5: Unicode literals by character number

In an interpolated literal, whether a double-quoted string or a regex, you may specify a character by its number using the "\x{HHHHHH}" escape.

 String: "\x{3a3}"
 Regex:  /\x{3a3}/

 String: "\x{1d45b}"
 Regex:  /\x{1d45b}/

 # even non-BMP ranges in regex work fine
 /[\x{1D434}-\x{1D467}]/

X 6: Get character name by number

 use charnames ();
 my $name = charnames::viacode(0x03A3);

X 7: Get character number by name

 use charnames ();
 my $number = charnames::vianame("GREEK CAPITAL LETTER SIGMA");

X 8: Unicode named characters

Use the "\N{charname}" notation to get the character by that name for use in interpolated literals (double-quoted strings and regexes). In v5.16, there is an implicit

 use charnames qw(:full :short);

But prior to v5.16, you must be explicit about which set of charnames you want. The ":full" names are the official Unicode character name, alias, or sequence, which all share a namespace.

 use charnames qw(:full :short latin greek);

 "\N{MATHEMATICAL ITALIC SMALL N}"      # :full
 "\N{GREEK CAPITAL LETTER SIGMA}"       # :full

Anything else is a Perl-specific convenience abbreviation. Specify one or more scripts by names if you want short names that are script-specific.

 "\N{Greek:Sigma}"                      # :short
 "\N{ae}"                               #  latin
 "\N{epsilon}"                          #  greek

The v5.16 release also supports a ":loose" import for loose matching of character names, which works just like loose matching of property names: that is, it disregards case, whitespace, and underscores:

 "\N{euro sign}"                        # :loose (from v5.16)

X 9: Unicode named sequences

These look just like character names but return multiple codepoints. Notice the %vx vector-print functionality in "printf".

 use charnames qw(:full);
 my $seq = "\N{LATIN CAPITAL LETTER A WITH MACRON AND GRAVE}";
 printf "U+%v04X\n", $seq;
 U+0100.0300

X 10: Custom named characters

Use ":alias" to give your own lexically scoped nicknames to existing characters, or even to give unnamed private-use characters useful names.

 use charnames ":full", ":alias" => {
     ecute => "LATIN SMALL LETTER E WITH ACUTE",
     "APPLE LOGO" => 0xF8FF, # private use character
 };

 "\N{ecute}"
 "\N{APPLE LOGO}"

X 11: Names of
CJK
codepoints

Sinograms like

XXXX

come back with character names of "CJK UNIFIED IDEOGRAPH-6771" and "CJK UNIFIED IDEOGRAPH-4EAC", because their XnamesX vary. The

CPAN

"Unicode::Unihan" module has a large database for decoding these (and a whole lot more), provided you know how to understand its output.

 # cpan -i Unicode::Unihan
 use Unicode::Unihan;
 my $str = "XX";
 my $unhan = Unicode::Unihan->new;
 for my $lang (qw(Mandarin Cantonese Korean JapaneseOn JapaneseKun)) {
     printf "CJK $str in %-12s is ", $lang;
     say $unhan->$lang($str);
 }

prints:

 CJK XX in Mandarin     is DONG1JING1
 CJK XX in Cantonese    is dung1ging1
 CJK XX in Korean       is TONGKYENG
 CJK XX in JapaneseOn   is TOUKYOU KEI KIN
 CJK XX in JapaneseKun  is HIGASHI AZUMAMIYAKO

If you have a specific romanization scheme in mind, use the specific module:

 # cpan -i Lingua::JA::Romanize::Japanese
 use Lingua::JA::Romanize::Japanese;
 my $k2r = Lingua::JA::Romanize::Japanese->new;
 my $str = "XX";
 say "Japanese for $str is ", $k2r->chars($str);

prints

 Japanese for XX is toukyou

X 12: Explicit encode/decode

On rare occasion, such as a database read, you may be given encoded text you need to decode.

  use Encode qw(encode decode);

  my $chars = decode("shiftjis", $bytes, 1);
 # OR
  my $bytes = encode("MIME-Header-ISO_2022_JP", $chars, 1);

For streams all in the same encoding, don't use encode/decode; instead set the file encoding when you open the file or immediately after with "binmode" as described later below.

X 13: Decode program arguments as utf8

     $ perl -CA ...
 or
     $ export PERL_UNICODE=A
 or
    use Encode qw(decode_utf8);
    @ARGV = map { decode_utf8($_, 1) } @ARGV;

X 14: Decode program arguments as locale encoding

    # cpan -i Encode::Locale
    use Encode qw(locale);
    use Encode::Locale;

    # use "locale" as an arg to encode/decode
    @ARGV = map { decode(locale => $_, 1) } @ARGV;

X 15: Declare STD{
IN,OUT,ERR
} to be utf8

Use a command-line option, an environment variable, or else call "binmode" explicitly:

     $ perl -CS ...
 or
     $ export PERL_UNICODE=S
 or
     use open qw(:std :utf8);
 or
     binmode(STDIN,  ":utf8");
     binmode(STDOUT, ":utf8");
     binmode(STDERR, ":utf8");

X 16: Declare STD{
IN,OUT,ERR
} to be in locale encoding

    # cpan -i Encode::Locale
    use Encode;
    use Encode::Locale;

    # or as a stream for binmode or open
    binmode STDIN,  ":encoding(console_in)"  if -t STDIN;
    binmode STDOUT, ":encoding(console_out)" if -t STDOUT;
    binmode STDERR, ":encoding(console_out)" if -t STDERR;

X 17: Make file I/O default to utf8

Files opened without an encoding argument will be in

UTF-8:

     $ perl -CD ...
 or
     $ export PERL_UNICODE=D
 or
     use open qw(:utf8);

X 18: Make all I/O and args default to utf8

     $ perl -CSDA ...
 or
     $ export PERL_UNICODE=SDA
 or
     use open qw(:std :utf8);
     use Encode qw(decode_utf8);
     @ARGV = map { decode_utf8($_, 1) } @ARGV;

X 19: Open file with specific encoding

Specify stream encoding. This is the normal way to deal with encoded text, not by calling low-level functions.

 # input file
     open(my $in_file, "< :encoding(UTF-16)", "wintext");
 OR
     open(my $in_file, "<", "wintext");
     binmode($in_file, ":encoding(UTF-16)");
 THEN
     my $line = <$in_file>;

 # output file
     open($out_file, "> :encoding(cp1252)", "wintext");
 OR
     open(my $out_file, ">", "wintext");
     binmode($out_file, ":encoding(cp1252)");
 THEN
     print $out_file "some text\n";

More layers than just the encoding can be specified here. For example, the incantation ":raw :encoding(UTF-16LE) :crlf" includes implicit

CRLF

handling.

X 20: Unicode casing

Unicode casing is very different from

ASCII

casing.

 uc("henry X")  # "HENRY X"
 uc("tschu.beta")   # "TSCHU.SS"  notice beta => SS

 # both are true:
 "tschu.beta"  =~ /TSCHU.SS/i   # notice beta => SS
 "XXXXXXX" =~ /XXXXXXX/i   # notice X,X,X sameness

X 21: Unicode case-insensitive comparisons

Also available in the

CPAN

Unicode::CaseFold module, the new "fc" XfoldcaseX function from v5.16 grants access to the same Unicode casefolding as the "/i" pattern modifier has always used:

 use feature "fc"; # fc() function is from v5.16

 # sort case-insensitively
 my @sorted = sort { fc($a) cmp fc($b) } @list;

 # both are true:
 fc("tschu.beta")  eq fc("TSCHU.SS")
 fc("XXXXXXX") eq fc("XXXXXXX")

X 22: Match Unicode linebreak sequence in regex

A Unicode linebreak matches the two-character

CRLF

grapheme or any of seven vertical whitespace characters. Good for dealing with textfiles coming from different operating systems.

 \R

 s/\R/\n/g;  # normalize all linebreaks to \n

X 23: Get character category

Find the general category of a numeric codepoint.

 use Unicode::UCD qw(charinfo);
 my $cat = charinfo(0x3A3)->{category};  # "Lu"

X 24: Disabling Unicode-awareness in builtin charclasses

Disable "\w", "\b", "\s", "\d", and the

POSIX

classes from working correctly on Unicode either in this scope, or in just one regex.

 use v5.14;
 use re "/a";

 # OR

 my($num) = $str =~ /(\d+)/a;

Or use specific un-Unicode properties, like "\p{ahex}" and "\p{POSIX_Digit"}. Properties still work normally no matter what charset modifiers ("/d /u /l /a /aa") should be effect.

X 25: Match Unicode properties in regex with \p, \P

These all match a single codepoint with the given property. Use "\P" in place of "\p" to match one codepoint lacking that property.

 \pL, \pN, \pS, \pP, \pM, \pZ, \pC
 \p{Sk}, \p{Ps}, \p{Lt}
 \p{alpha}, \p{upper}, \p{lower}
 \p{Latin}, \p{Greek}
 \p{script=Latin}, \p{script=Greek}
 \p{East_Asian_Width=Wide}, \p{EA=W}
 \p{Line_Break=Hyphen}, \p{LB=HY}
 \p{Numeric_Value=4}, \p{NV=4}

X 26: Custom character properties

Define at compile-time your own custom character properties for use in regexes.

 # using private-use characters
 sub In_Tengwar { "E000\tE07F\n" }

 if (/\p{In_Tengwar}/) { ... }

 # blending existing properties
 sub Is_GraecoRoman_Title {<<'END_OF_SET'}
 +utf8::IsLatin
 +utf8::IsGreek
 &utf8::IsTitle
 END_OF_SET

 if (/\p{Is_GraecoRoman_Title}/ { ... }

X 27: Unicode normalization

Typically render into

NFD

on input and

NFC

on output. Using

NFKC

NFKD

functions improves recall on searches, assuming you've already done to the same text to be searched. Note that this is about much more than just pre- combined compatibility glyphs; it also reorders marks according to their canonical combining classes and weeds out singletons.

 use Unicode::Normalize;
 my $nfd  = NFD($orig);
 my $nfc  = NFC($orig);
 my $nfkd = NFKD($orig);
 my $nfkc = NFKC($orig);

X 28: Convert non-ASCII Unicode numerics

Unless youXve used "/a" or "/aa", "\d" matches more than

ASCII

digits only, but PerlXs implicit string-to-number conversion does not current recognize these. HereXs how to convert such strings manually.

 use v5.14;  # needed for num() function
 use Unicode::UCD qw(num);
 my $str = "got X and XXXX and X and here";
 my @nums = ();
 while ($str =~ /(\d+|\N)/g) {  # not just ASCII!
    push @nums, num($1);
 }
 say "@nums";   #     12      4567      0.875

 use charnames qw(:full);
 my $nv = num("\N{RUMI DIGIT ONE}\N{RUMI DIGIT TWO}");

X 29: Match Unicode grapheme cluster in regex

Programmer-visible XcharactersX are codepoints matched by "/./s", but user-visible XcharactersX are graphemes matched by "/\X/".

 # Find vowel *plus* any combining diacritics,underlining,etc.
 my $nfd = NFD($orig);
 $nfd =~ / (?=[aeiou]) \X /xi

X 30: Extract by grapheme instead of by codepoint (regex)

 # match and grab five first graphemes
 my($first_five) = $str =~ /^ ( \X{5} ) /x;

X 31: Extract by grapheme instead of by codepoint (substr)

 # cpan -i Unicode::GCString
 use Unicode::GCString;
 my $gcs = Unicode::GCString->new($str);
 my $first_five = $gcs->substr(0, 5);

X 32: Reverse string by grapheme

Reversing by codepoint messes up diacritics, mistakenly converting "creme brulee" into "eelXurb emXerc" instead of into "eelurb emerc"; so reverse by grapheme instead. Both these approaches work right no matter what normalization the string is in:

 $str = join("", reverse $str =~ /\X/g);

 # OR: cpan -i Unicode::GCString
 use Unicode::GCString;
 $str = reverse Unicode::GCString->new($str);

X 33: String length in graphemes

The string "brulee" has six graphemes but up to eight codepoints. This counts by grapheme, not by codepoint:

 my $str = "brulee";
 my $count = 0;
 while ($str =~ /\X/g) { $count++ }

  # OR: cpan -i Unicode::GCString
 use Unicode::GCString;
 my $gcs = Unicode::GCString->new($str);
 my $count = $gcs->length;

X 34: Unicode column-width for printing

PerlXs "printf", "sprintf", and "format" think all codepoints take up 1 print column, but many take 0 or 2. Here to show that normalization makes no difference, we print out both forms:

 use Unicode::GCString;
 use Unicode::Normalize;

 my @words = qw/creme brulee/;
 @words = map { NFC($_), NFD($_) } @words;

 for my $str (@words) {
     my $gcs = Unicode::GCString->new($str);
     my $cols = $gcs->columns;
     my $pad = " " x (10 - $cols);
     say str, $pad, " |";
 }

generates this to show that it pads correctly no matter the normalization:

 creme      |
 creXme      |
 brulee     |
 bruXleXe     |

X 35: Unicode collation

Text sorted by numeric codepoint follows no reasonable alphabetic order; use the

UCA

for sorting text.

 use Unicode::Collate;
 my $col = Unicode::Collate->new();
 my @list = $col->sort(@old_list);

See the ucsort program from the Unicode::Tussle

CPAN

module for a convenient command-line interface to this module.

X 36: Case- and accent-insensitive Unicode sort

Specify a collation strength of level 1 to ignore case and diacritics, only looking at the basic character.

 use Unicode::Collate;
 my $col = Unicode::Collate->new(level => 1);
 my @list = $col->sort(@old_list);

X 37: Unicode locale collation

Some locales have special sorting rules.

 # either use v5.12, OR: cpan -i Unicode::Collate::Locale
 use Unicode::Collate::Locale;
 my $col = Unicode::Collate::Locale->new(locale => "de__phonebook");
 my @list = $col->sort(@old_list);

The ucsort program mentioned above accepts a "--locale" parameter.

X 38: Making cmp work on text instead of codepoints

Instead of this:

 @srecs = sort {
     $b->{AGE}   <=>  $a->{AGE}
                 ||
     $a->{NAME}  cmp  $b->{NAME}
 } @recs;

Use this:

 my $coll = Unicode::Collate->new();
 for my $rec (@recs) {
     $rec->{NAME_key} = $coll->getSortKey( $rec->{NAME} );
 }
 @srecs = sort {
     $b->{AGE}       <=>  $a->{AGE}
                     ||
     $a->{NAME_key}  cmp  $b->{NAME_key}
 } @recs;

X 39: Case- and accent-insensitive comparisons

Use a collator object to compare Unicode text by character instead of by codepoint.

 use Unicode::Collate;
 my $es = Unicode::Collate->new(
     level => 1,
     normalization => undef
 );

  # now both are true:
 $es->eq("Garcia",  "GARCIA" );
 $es->eq("Marquez", "MARQUEZ");

X 40: Case- and accent-insensitive locale comparisons

Same, but in a specific locale.

 my $de = Unicode::Collate::Locale->new(
            locale => "de__phonebook",
          );

 # now this is true:
 $de->eq("tschu.beta", "TSCHUESS");  # notice u. => UE, beta => SS

X 41: Unicode linebreaking

Break up text into lines according to Unicode rules.

 # cpan -i Unicode::LineBreak
 use Unicode::LineBreak;
 use charnames qw(:full);

 my $para = "This is a super\N{HYPHEN}long string. " x 20;
 my $fmt = Unicode::LineBreak->new;
 print $fmt->break($para), "\n";

X 42: Unicode text in
DBM
hashes, the tedious way

Using a regular Perl string as a key or value for a

DBM

hash will trigger a wide character exception if any codepoints wonXt fit into a byte. HereXs how to manually manage the translation:

    use DB_File;
    use Encode qw(encode decode);
    tie %dbhash, "DB_File", "pathname";

 # STORE

    # assume $uni_key and $uni_value are abstract Unicode strings
    my $enc_key   = encode("UTF-8", $uni_key, 1);
    my $enc_value = encode("UTF-8", $uni_value, 1);
    $dbhash{$enc_key} = $enc_value;

 # FETCH

    # assume $uni_key holds a normal Perl string (abstract Unicode)
    my $enc_key   = encode("UTF-8", $uni_key, 1);
    my $enc_value = $dbhash{$enc_key};
    my $uni_value = decode("UTF-8", $enc_value, 1);

X 43: Unicode text in
DBM
hashes, the easy way

HereXs how to implicitly manage the translation; all encoding and decoding is done automatically, just as with streams that have a particular encoding attached to them:

    use DB_File;
    use DBM_Filter;

    my $dbobj = tie %dbhash, "DB_File", "pathname";
    $dbobj->Filter_Value("utf8");  # this is the magic bit

 # STORE

    # assume $uni_key and $uni_value are abstract Unicode strings
    $dbhash{$uni_key} = $uni_value;

  # FETCH

    # $uni_key holds a normal Perl string (abstract Unicode)
    my $uni_value = $dbhash{$uni_key};

X 44:
PROGRAM:
Demo of Unicode collation and printing

HereXs a full program showing how to make use of locale-sensitive sorting, Unicode casing, and managing print widths when some of the characters take up zero or two columns, not just one column each time. When run, the following program produces this nicely aligned output:

    Creme Brulee....... X2.00
    Eclair............. X1.60
    Fideua............. X4.20
    Hamburger.......... X6.00
    Jamon Serrano...... X4.45
    Linguica........... X7.00
    Pate............... X4.15
    Pears.............. X2.00
    Peches............. X2.25
    Smorbrod........... X5.75
    Spa.tzle............ X5.50
    Xorico............. X3.00
    XXXXX.............. X6.50
    XXX............. X4.00
    XXX............. X2.65
    XXXXX......... X8.00
    XXXXXXX..... X1.85
    XX............... X9.99
    XX............... X7.50

Here's that program; tested on v5.14.

 #!/usr/bin/env perl
 # umenu - demo sorting and printing of Unicode food
 #
 # (obligatory and increasingly long preamble)
 #
 use utf8;
 use v5.14;                       # for locale sorting
 use strict;
 use warnings;
 use warnings  qw(FATAL utf8);    # fatalize encoding faults
 use open      qw(:std :utf8);    # undeclared streams in UTF-8
 use charnames qw(:full :short);  # unneeded in v5.16

 # std modules
 use Unicode::Normalize;          # std perl distro as of v5.8
 use List::Util qw(max);          # std perl distro as of v5.10
 use Unicode::Collate::Locale;    # std perl distro as of v5.14

 # cpan modules
 use Unicode::GCString;           # from CPAN

 # forward defs
 sub pad($$$);
 sub colwidth(_);
 sub entitle(_);

 my %price = (
     "XXXXX"             => 6.50, # gyros
     "pears"             => 2.00, # like um, pears
     "linguica"          => 7.00, # spicy sausage, Portuguese
     "xorico"            => 3.00, # chorizo sausage, Catalan
     "hamburger"         => 6.00, # burgermeister meisterburger
     "eclair"            => 1.60, # dessert, French
     "smorbrod"          => 5.75, # sandwiches, Norwegian
     "spa.tzle"           => 5.50, # Bayerisch noodles, little sparrows
     "XX"              => 7.50, # bao1 zi5, steamed pork buns, Mandarin
     "jamon serrano"     => 4.45, # country ham, Spanish
     "peches"            => 2.25, # peaches, French
     "XXXXXXX"    => 1.85, # cream-filled pastry like eclair
     "XXX"            => 4.00, # makgeolli, Korean rice wine
     "XX"              => 9.99, # sushi, Japanese
     "XXX"            => 2.65, # omochi, rice cakes, Japanese
     "creme brulee"      => 2.00, # crema catalana
     "fideua"            => 4.20, # more noodles, Valencian
                                  # (Catalan=fideuada)
     "pate"              => 4.15, # gooseliver paste, French
     "XXXXX"        => 8.00, # okonomiyaki, Japanese
 );

 my $width = 5 + max map { colwidth } keys %price;

 # So the Asian stuff comes out in an order that someone
 # who reads those scripts won't freak out over; the
 # CJK stuff will be in JIS X 0208 order that way.
 my $coll  = Unicode::Collate::Locale->new(locale => "ja");

 for my $item ($coll->sort(keys %price)) {
     print pad(entitle($item), $width, ".");
     printf " X%.2f\n", $price{$item};
 }

 sub pad($$$) {
     my($str, $width, $padchar) = @_;
     return $str . ($padchar x ($width - colwidth($str)));
 }

 sub colwidth(_) {
     my($str) = @_;
     return Unicode::GCString->new($str)->columns;
 }

 sub entitle(_) {
     my($str) = @_;
     $str =~ s{ (?=\pL)(\S)     (\S*) }
              { ucfirst($1) . lc($2)  }xge;
     return $str;
 }

AUTHOR

Tom Christiansen <tchrist@perl.com> wrote this, with occasional kibbitzing from Larry Wall and Jeffrey Friedl in the background.

COPYRIGHT AND LICENCE

This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself.

Most of these examples taken from the current edition of the XCamel BookX; that is, from the 4XX Edition of Programming Perl, Copyright X 2012 Tom Christiansen <et al.>, 2012-02-13 by OXReilly Media. The code itself is freely redistributable, and you are encouraged to transplant, fold, spindle, and mutilate any of the examples in this manpage however you please for inclusion into your own programs without any encumbrance whatsoever. Acknowledgement via code comment is polite but not required.

REVISION HISTORY

v1.0.0 X first public release, 2012-02-27

perlunicook • man page

perlunicook • man page

perlunicook (1)

Leading comments

NAME

DESCRIPTION

EXAMPLES

X 0: Standard preamble

X 1: Generic Unicode-savvy filter

X 2: Fine-tuning Unicode warnings

X 3: Declare source in utf8 for identifiers and literals

X 4: Characters and their numbers

X 5: Unicode literals by character number

X 6: Get character name by number

X 7: Get character number by name

X 8: Unicode named characters

X 9: Unicode named sequences

X 10: Custom named characters

X 11: Names of CJK codepoints

X 12: Explicit encode/decode

X 13: Decode program arguments as utf8

X 14: Decode program arguments as locale encoding

X 15: Declare STD{IN,OUT,ERR} to be utf8

X 16: Declare STD{IN,OUT,ERR} to be in locale encoding

X 17: Make file I/O default to utf8

X 18: Make all I/O and args default to utf8

X 19: Open file with specific encoding

X 20: Unicode casing

X 21: Unicode case-insensitive comparisons

X 22: Match Unicode linebreak sequence in regex

X 23: Get character category

X 24: Disabling Unicode-awareness in builtin charclasses

X 25: Match Unicode properties in regex with \p, \P

X 26: Custom character properties

X 27: Unicode normalization

X 28: Convert non-ASCII Unicode numerics

X 29: Match Unicode grapheme cluster in regex

X 30: Extract by grapheme instead of by codepoint (regex)

X 31: Extract by grapheme instead of by codepoint (substr)

X 32: Reverse string by grapheme

X 33: String length in graphemes

X 34: Unicode column-width for printing

X 35: Unicode collation

X 36: Case- and accent-insensitive Unicode sort

X 37: Unicode locale collation

X 38: Making cmp work on text instead of codepoints

X 39: Case- and accent-insensitive comparisons

X 40: Case- and accent-insensitive locale comparisons

X 41: Unicode linebreaking

X 42: Unicode text in DBM hashes, the tedious way

X 43: Unicode text in DBM hashes, the easy way

X 44: PROGRAM: Demo of Unicode collation and printing

SEE ALSO

AUTHOR

COPYRIGHT AND LICENCE

REVISION HISTORY

Installed via

Man Section

extra • Version

extra • Source

extra • Book

X 11: Names of
CJK
codepoints

X 15: Declare STD{
IN,OUT,ERR
} to be utf8

X 16: Declare STD{
IN,OUT,ERR
} to be in locale encoding

X 42: Unicode text in
DBM
hashes, the tedious way

X 43: Unicode text in
DBM
hashes, the easy way

X 44:
PROGRAM:
Demo of Unicode collation and printing