gnutv (1)
NAME
gnutv - a digital tv utility.SYNOPSIS
gnutv [options]<channelname>DESCRIPTION
This manual page documents briefly the gnutv commands.gnutv is a digital tv utility.
OPTIONS
- -adapter <id>
- adapter to use (default 0)
- -frontend <id>
- frontend to use (default 0)
- -demux <id>
- demux to use (default 0)
- -caslotnum <id>
- ca slot number to use (default 0)
- -channels <filename>
- channels.conf file
- -secfile <filename>
- Optional sec.conf file
- -secid <secid>
-
ID of the SEC configuration to use, one of:
* UNIVERSAL (default) - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz, Dual LO, loband 9750, hiband 10600 MHz
* DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz
* STANDARD - 10945 to 11450 Mhz, Single LO, 10000 Mhz
* ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz
* C-BAND - Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz
* C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz
* One of the sec definitions from the secfile if supplied
- -out decoder
- Output to hardware decoder (default)
- -out decoderabypass
- Output to hardware decoder using audio bypass -out dvr Output stream to dvr device -out null Do not output anything -out stdout Output to stdout -out file <filename> Output stream to file -out udp <address> <port> Output stream to address:port using udp -out udpif <address> <port> <interface> Output stream to address:port using udp forcing the specified interface -out rtp <address> <port> Output stream to address:port using udp-rtp -out rtpif <address> <port> <interface> Output stream to address:port using udp-rtp forcing the specified interface
- -timeout <secs>
- Number of seconds to output channel for (0=>exit immediately after successful tuning, default is to output forever)
- -cammenu
- Show the CAM menu
- -nomoveca
-
Do not attempt to move CA descriptors from stream to programme level
-h
print this help text
This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>.