geocpset (1)

Leading comments

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man1/geocpset.1".)

NAME

geocpset - adds control points based on geometric position

SYNOPSIS

geocpset [-o output.pto] input.pto

DESCRIPTION

geocpset is a tool for panoramas which contains featureless images, e.g. sky images. In this images a control point detector does not find control points. geocpset analyses the positions of the images in project files. Then it adds control points to these images which are not connected by control points. The control points are set only be the geometric positions of the images and not by the image content. So geocpset should only used with projects which have assigned rough image positions.

USAGE

geocpset -o output.pto input.pto

If the --output/-o switch is missing then the suffix ``_geo'' is added to the filename.

The indented workflow is

#1 First create project file

pto_gen -o project.pto *.jpg

#2 Then assign rough positions to images

pto_var --set y=i*20-40,p=0,r=0 -o project.pto project.pto

#3 Now run a normal control point detector, e.g. only on overlapping images

cpfind --prealigned -o project.pto project.pto

#4 And finally connect all unconnected images

geocpset -o project.pto project.pto

OPTIONS

-o|--output output.pto

Output a pto file with the given filename. If not given it will append ``_geo'' to the input filename.

-e|--each-overlap

By default geocpset adds only control points to unconnected images. With this switch you can force to add a geometric control point to each overlap, which is not connect by control points or linked with image positions.

--min-overlap=NUM

By default geocpset takes only image pairs into account which overlap more than 10 %. If you have very narrow overlaps you can decrease this value to take also such small overlaps into account, e.g. --min-overlap=1

-h|--help

Display help.

AUTHORS

geocpset was written by Thomas Modes. This manpages was generated by converting the wiki-page on <wiki.panotools.org> to pod-format by Andreas Metzler.