bundledoc • man page

bundledoc (1)

Leading comments

Automatically generated by Pod::Man 2.27 (Pod::Simple 3.28)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man1/bundledoc.1".)

NAME

bundledoc - bundle all the files needed by a LaTeX document

SYNOPSIS

bundledoc [--version] [--help] [--[no]verbose] [--texfile=file] [--directory=directory] [--[no]localonly] [--exclude=string] [--include=filespec] [--manifest=file] [--listdeps=[yes|no|only|rel]...] [--[no]keepdirs] [--config=file] .dep file

DESCRIPTION

bundledoc is a post-processor for the snapshot package that bundles together all the classes, packages, and files needed to build a given LaTeX document. It reads the .dep file that snapshot produces, finds each of the files mentioned therein, and packages them into a single archive file (e.g., a .tar.gz file), suitable for moving across systems, transmitting to a colleague, etc.

As the simplest example possible, consider a LaTeX file called, say, hello.tex:

    \RequirePackage{snapshot}       % Needed by bundledoc
    \documentclass[11pt]{article}

    \begin{document}
    Hello, world!
    \end{document}

The "\RequirePackage{snapshot}" causes a hello.dep file to be produced. When bundledoc is then given "hello.dep" as an argument, it locates the dependent files --- snapshot.sty, article.cls, and size11.clo --- and bundles them into a single archive file, along with hello.tex and a

MANIFEST

file (described in ``

OPTIONS''

, below).

OPTIONS

In the following descriptions, somefile refers to the name of your main LaTeX document (no extension).

bundledoc requires the name of the dependency file produced by snapshot (normally somefile.dep). The following options may also be given:

--version

Output the bundledoc script's version number. This overrides all of the remaining options.

--help

Give a brief usage message. This overrides all of the remaining options.

--[no]verbose (default: noverbose)

bundledoc normally does not output anything except error messages. With "--verbose", it outputs copious status messages.

--texfile=main .tex file (default: somefile.tex)

snapshot's dependency file does not list the main LaTeX file (the one that gets passed to latex). In order for bundledoc to find and bundle that file, bundledoc assumes it has the same name as the snapshot dependency file but with a .tex extension. If this is not the case, then use "--texfile" to specify the correct filename.

--directory=archive directory (default: somefile)

When bundledoc creates an archive (e.g., a .tar or .zip file) containing the document's files, it puts all of them in a directory to avoid cluttering the current directory with files. If the given dependency file is called somefile.dep then the resulting archive will, by default, store all the dependent files in a somefile directory. To change the directory name use the "--directory" option.

--[no]localonly (default: nolocalonly)

Although bundledoc normally archives all of the files named in the .dep file, the "--localonly" option tells bundledoc to exclude all files located in a directory other than the .tex file's directory or one of its subdirectories.

--exclude=string (default: none)

While "--localonly" causes files outside of the .tex file's directory tree to be omitted from the archive, "--exclude" provides finer-grained control over files to omit from the archive. The "--exclude" option, which can be specified repeatedly on the command line, causes all files whose name contains string to be omitted from the archive.

--include=filespec (default: none)

The "--include" option, which can be specified repeatedly on the command line, instructs bundledoc to include in the archive all of the files matching filespec, even if they're not referenced in the .dep file.

--manifest=manifest file (default:
MANIFEST
)

In addition to the dependent files, bundledoc includes in the archive file one extra file called, by default, ``

MANIFEST

''.

MANIFEST

is a text file that lists the original filenames of all the dependencies. To change the filename from ``

MANIFEST

'' to something else, use the "--manifest" option. As a special case, "--manifest=""" tells bundledoc not to include a manifest file at all.

--listdeps=[yes|no|only|rel]...] (default: no)

"--listdeps" accepts one or more of "yes", "no", "only", or "rel" as a comma-separated list. As long as "no" does not appear in this list, bundledoc outputs all of the main LaTeX file's dependencies. If the list contains "rel", then bundledoc outputs the list of dependencies with relative pathnames. If the list contains "only", then bundledoc exits after displaying the list, without producing an archive.

--[no]keepdirs (default: nokeepdirs)

Normally, the archive file that bundledoc produces contains a single directory --- and subdirectories, if the document refers explicitly to them --- in which all the dependent files lie. If "--keepdirs" is specified, all the dependent files are stored with their original pathnames. For example, if somefile.tex depends on figures/somefigure.eps, article.cls, and snapshot.sty, then the somefile archive will normally contain the following files:

*: somefile/somefile.tex
*: somefile/figures/somefigure.eps
*: somefile/article.cls
*: somefile/snapshot.sty
*: somefile/MANIFEST

However, "--keepdirs" will cause the somefile archive to contain the following sorts of filenames instead:

*: home/me/mydocs/somefile.tex
*: home/me/mydocs/figures/somefigure.eps
*: usr/share/texmf/tex/latex/base/article.cls
*: usr/share/texmf/tex/latex/snapshot/snapshot.sty

: "--directory" is not used when "--keepdirs" is in effect. In addition, no manifest file is written to the archive file as it contains redundant information.

--config=configuration file (default: <none>)

The "--config" option is used to point bundledoc to the appropriate configuration (.cfg) file for your TeX distribution and operating system. bundledoc comes with a few configuration files and it's easy to write more. See ``

CONFIGURATION FILES''

(below) for a description of the configuration file format.

CONFIGURATION FILES

Format

Configuration files follow a fairly simple format. Lines beginning with "#" are comments. Blank lines are ignored. All other lines are of the form:

    variable: value

The current version of bundledoc recognizes the following variables:

bundle: The command to use to bundle a set of files into a single archive file
sink: The affix to a command to discard its output
find: The command to find a file within the TeX tree(s).

Values that are too long for one line can be split across multiple lines by using "\" as the line-continuation symbol.

There are two environment variables that bundledoc makes available for use by configuration-file commands: "BDBASE", which is set to somefile (as in ``

OPTIONS''

), and "BDINPUTS", which is set to a space-separated list of files that a command is to operate upon. That is, when the command associated with "bundle" is running, "BDINPUTS" contains the list of all the files that are to be archived. In contrast, when the command associated with "find" is running, "BDINPUTS" contains the name of the file to search for.

Examples

The following configuration file parallels bundledoc's default values of the various configuration-file variables, which represents a kpathsea-based TeX distribution running on a generic Unix system, which doesn't necessarily have any of the

GNU

tools, such as gzip or

GNU

tar:

    # "Default" configuration file
    # By Scott Pakin <scott+bdoc@pakin.org>

    bundle: (tar -cvf - $BDINPUTS | compress > $BDBASE.tar.Z)
    sink:   > /dev/null 2>&1
    find:   kpsewhich -progname=latex $BDINPUTS

The parentheses in the "bundle:" line tell the Unix shell to run the command in a subshell. This is to make the "sink:" affix work properly (i.e., so there aren't two ">"'s in the same command).

Notice how the commands treat "BDBASE" and "BDINPUTS" like any other environment variables in a Unix shell, using "$" to take their value. Other operating systems use different conventions for referring to environment variables. For instance, a configuration file for a Windows-based TeX distribution would use "%BDBASE%" and "%BDINPUTS%" instead.

The value for "sink:" is specific to an operating system. The value for "find:" is specific to a TeX distribution. "bundle:" is where the most opportunity for customization lies. You can use "bundle:" to specify your favorite archive format. For example, you can produce a shar file on Unix with something like:

    bundle: (shar --archive-name="$BDBASE" $BDINPUTS > $BDBASE.sh)

or a

CAB

file on Microsoft Windows with something like:

    bundle: cabarc -r -p N %BDBASE%.cab %BDINPUTS%

EXAMPLES

Assume that myfile.dep was produced from myfile.tex by following the instructions in the Description section. The following command produces a .zip file with the MikTeX TeX distribution running on Microsoft Windows:

    bundledoc --config=miktex.cfg myfile.dep

(In practice, it's probably necessary to specify to "--config" the complete path to bundledoc's miktex.cfg configuration file.)

The following builds a .tar.gz archive with the TeX Live distribution running on a Unix-like operating system. bundledoc will produce verbose output describing its operations. All files not in the same directory tree as myfile.tex and all files containing ``.fd'' or ``.sty'' in their names are omitted. However, all .bib files in the current directory will be included in the archive even though none of them are referenced by myfile.dep. Finally, no

MANIFEST

file will be produced.

    bundledoc --config=texlive-unix.cfg --verbose --localonly \
      --exclude=.fd --exclude=.cfg --include="*.bib" --manifest="" \
      myfile.dep

FILES

The user must have previously installed snapshot.sty and used it to produce a dependency file for his document. Besides that, the set of external files needed by bundledoc is system-specific and depends on the configuration file used. (See ``

CONFIGURATION FILES''

, above.)

bundledoc currently comes with two configuration files:

texlive-unix.cfg: Configuration file for TeX Live installations on Unix or Linux. TeX Live is a kpathsea-based TeX distribution that runs on various flavors of Unix and Microsoft Windows. texlive-unix.cfg assumes you have gzip and uses it to produce a .tar.gz archive file. The configuration file has bundledoc use kpsewhich to find LaTeX files.
miktex.cfg: Configuration file for MikTeX installations. MikTeX is a popular TeX distribution for Microsoft Windows. miktex.cfg assumes you have zip and uses it to produce a .zip archive file. The configuration file now has bundledoc use kpsewhich to find LaTeX files; older version of MikTeX required the rather nonstandard initexmf for this purpose.
texlive-unix-arlatex.cfg: This is a variant of texlive-unix.cfg that uses arlatex instead of gzip to archive files. arlatex is a script included in the bundledoc distribution that generates a self-extracting .tex file based on LaTeX's "filecontents" environment.

NOTES

Including and excluding files

The "--localonly", "--exclude", and "--include" options provide control over the archive's contents. "--exclude" and "--include" can be specified repeatedly on the command line. The order in which these options are specified is immaterial; bundledoc processes file inclusions and exclusions in the following order:

1.: All files referenced by the .dep file are added to the list of files to archive.
2.: If "--localonly" is specified, all files not found in the .tex file's directory are removed from the list.
3.: For each "--exclude" string specified, all files containing that string are removed from the list.
4.: For each "--include" file specification, the set of files designated by its expansion are added to the list.

Issues When Running Under Microsoft Windows

First, because bundledoc is a Perl script, you should do one of the following to run it under Windows:

*: "perl bundledoc"
*: Rename bundledoc to bundledoc.pl and run "bundledoc.pl". (This is assuming you have a file association set up for .pl.)
*: Run the pl2bat script (if you have it) to convert bundledoc to bundledoc.bat, then run "bundledoc".

Second, Windows uses a multi-rooted filesystem (i.e., multiple drive letters). I wouldn't be surprised if bad things were to happen if the files to be bundled are scattered across drives. In addition, Windows supports ``

UNC

'' filenames, which have no drive letter at all, just a machine and share name.

UNC

filenames are also untested waters for bundledoc. Be careful!

Testing Status

I have tested bundledoc only with Perl v5.6.0 and later and only on the following platforms:

*: Linux + TeX Live
*: Linux + teTeX
*: Windows
NT +
MiKTeX
*: Solaris + ??? (something kpathsea-based)

It is my hope that bundledoc works on many more platforms than those. I tried to make the program itself fairly independent of the operating system; only the configuration files should have to change to run bundledoc on a different system.

Future Work

I'd like bundledoc to work on as wide a variety of TeX distributions as possible. If your platform is significantly different from the ones listed in ``Testing Status'' (e.g., if you're running ) and you need to create a substantially different configuration file from texlive-unix.cfg and miktex.cfg, please send it to me at the address listed in ``

AUTHOR''

so I can include it in a future version of bundledoc. (I make no promises, though).

Once bundledoc works on all the major operating systems and TeX distributions it would be really convenient if I could get bundledoc to detect the platform it's running on and automatically select an appropriate configuration file.

Finally, it would be handy for bundledoc to include fonts in the archive file. At a minimum, it should include .tfm files, but it would be even better if it included .mf, .pfb, .ttf, and other common font formats, as well.

Acknowledgments

Thanks to Fabien Vignes-Tourneret for suggesting what became the "--localonly" option and for a discussion that led to the "--exclude" and "--include" options; and to Marius Kleiner for updating bundledoc to properly handle document subdirectories.

AUTHOR

Scott Pakin, scott+bdoc@pakin.org

Installed via

texlive-extra-utils

Man Section

1 • User Commands

extra • Version

2014-08-24

extra • Source

v3.2

extra • Book

User Commands

References

arlatex (1)

gzip (1)

kpsewhich (1)

latex (1)

perl (1)

zip (1)

Referenced By

arlatex (1)

bundledoc • man page

bundledoc • man page

bundledoc (1)

Leading comments

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

CONFIGURATION FILES

Format

Examples

EXAMPLES

FILES

NOTES

Including and excluding files

Issues When Running Under Microsoft Windows

Testing Status

Future Work

Acknowledgments

SEE ALSO

AUTHOR

Installed via

Man Section

extra • Version

extra • Source

extra • Book

References

Referenced By