bts (1)

Leading comments

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================

(The comments found at the beginning of the groff file "man1/bts.1".)

NAME

bts - developers' command line interface to the BTS

SYNOPSIS

bts [options] command [args] [#comment] [.|, command [args] [#comment]] ...

DESCRIPTION

This is a command line interface to the Debian Bug Tracking System (), intended mainly for use by developers. It lets the be manipulated using simple commands that can be run at the prompt or in a script, does various sanity checks on the input, and constructs and sends a mail to the control address for you. A local cache of web pages and e-mails from the may also be created and updated.

In general, the command line interface is the same as what you would write in a mail to control@bugs.debian.org, just prefixed with ``bts''. For example:

 % bts severity 69042 normal
 % bts merge 69042 43233
 % bts retitle 69042 blah blah

A few additional commands have been added for your convenience, and this program is less strict about what constitutes a valid bug number. For example, ``severity Bug#85942 normal'' is understood, as is ``severity #85942 normal''. (Of course, your shell may regard ``#'' as a comment character though, so you may need to quote it!)

Also, for your convenience, this program allows you to abbreviate commands to the shortest unique substring (similar to how cvs lets you abbreviate commands). So it understands things like ``bts cl 85942''.

It is also possible to include a comment in the mail sent to the

If your shell does not strip out the comment in a command like ``bts severity 30321 normal #inflated severity'', then this program is smart enough to figure out where the comment is, and include it in the email. Note that most shells do strip out such comments before they get to the program, unless the comment is quoted. (Something like ``bts severity #85942 normal'' will not be treated as a comment!)

You can specify multiple commands by separating them with a single dot, rather like update-rc.d; a single comma may also be used; all the commands will then be sent in a single mail. It is important the dot/comma is surrounded by whitespace so it is not mistaken for part of a command. For example (quoting where necessary so that bts sees the comment):

 % bts severity 95672 normal , merge 95672 95673 \#they are the same!

The abbreviation ``it'' may be used to refer to the last mentioned bug number, so you could write:

 % bts severity 95672 wishlist , retitle it "bts: please add a --foo option"

Please use this program responsibly, and do take our users into consideration.

OPTIONS

bts examines the devscripts configuration files as described below. Command line options override the configuration file settings, though.

-o, --offline

Make bts use cached bugs for the show and bugs commands, if a cache is available for the requested data. See the cache command, below for information on setting up a cache.

--online, --no-offline

Opposite of --offline; overrides any configuration file directive to work offline.

-n, --no-action

Do not send emails but print them to standard output.

--cache, --no-cache

Should we attempt to cache new versions of

BTS

pages when performing show/bugs commands? Default is to cache.

--cache-mode={min|mbox|full}

When running a bts cache command, should we only mirror the basic bug (min), or should we also mirror the mbox version (mbox), or should we mirror the whole thing, including the mbox and the boring attachments to the

BTS

bug pages and the acknowledgement emails (full)? Default is min.

--cache-delay=seconds

Time in seconds to delay between each download, to avoid hammering the

BTS

web server. Default is 5 seconds.

--mbox

Open a mail reader to read the mbox corresponding to a given bug number for show and bugs commands.

--mailreader=

READER

Specify the command to read the mbox. Must contain a "%s" string (unquoted!), which will be replaced by the name of the mbox file. The command will be split on white space and will not be passed to a shell. Default is 'mutt -f %s'. (Also, %% will be substituted by a single % if this is needed.)

--cc-addr=

CC_EMAIL_ADDRESS

Send carbon copies to a list of users.

CC_EMAIL_ADDRESS

should be a comma-separated list of email addresses.

--use-default-cc

Add the addresses specified in the configuration file option

BTS_DEFAULT_CC

to the list specified using --cc-addr. This is the default.

--no-use-default-cc

Do not add addresses specified in

BTS_DEFAULT_CC

to the carbon copy list.

--sendmail=

SENDMAILCMD

Specify the sendmail command. The command will be split on white space and will not be passed to a shell. Default is /usr/sbin/sendmail. The -t option will be automatically added if the command is /usr/sbin/sendmail or /usr/sbin/exim*. For other mailers, if they require a -t option, this must be included in the

SENDMAILCMD

, for example: --sendmail=``/usr/sbin/mymailer -t''.

--mutt

Use mutt for sending of mails. Default is not to use mutt, except for some commands.

Note that one of $DEBEMAIL or $EMAIL must be set in the environment in order to use mutt to send emails.

--no-mutt

Don't use mutt for sending of mails.

--soap-timeout=

SECONDS

Specify a timeout for

SOAP

calls as used by the select and status commands.

--smtp-host=

SMTPHOST

Specify an

SMTP

host. If given, bts will send mail by talking directly to this

SMTP

host rather than by invoking a sendmail command.

The host name may be followed by a colon (``:'') and a port number in order to use a port other than the default. It may also begin with ``ssmtp://'' or ``smtps://'' to indicate that

SMTPS

should be used.

Note that one of $DEBEMAIL or $EMAIL must be set in the environment in order to use direct

SMTP

connections to send emails.

Note that when sending directly via an

SMTP

host, specifying addresses in --cc-addr or

BTS_DEFAULT_CC

that the

SMTP

host will not relay will cause the

SMTP

host to reject the entire mail.

Note also that the use of the reassign command may, when either --interactive or --force-interactive mode is enabled, lead to the automatic addition of a Cc to $newpackage@packages.debian.org. In these cases, the note above regarding relaying applies. The submission interface (port 587) on reportbug.debian.org does not support relaying and, as such, should not be used as an

SMTP

server for bts under the circumstances described in this paragraph.

--smtp-username=

USERNAME

, --smtp-password=

PASSWORD

Specify the credentials to use when connecting to the

SMTP

server specified by --smtp-host. If the server does not require authentication then these options should not be used.

If a username is specified but not a password, bts will prompt for the password before sending the mail.

--smtp-helo=

HELO

Specify the name to use in the

HELO

command when connecting to the

SMTP

server; defaults to the contents of the file /etc/mailname, if it exists.

Note that some

SMTP

servers may reject the use of a

HELO

which either does not resolve or does not appear to belong to the host using it.

--bts-server

Use a debbugs server other than bugs.debian.org

-f, --force-refresh

Download a bug report again, even if it does not appear to have changed since the last cache command. Useful if a --cache-mode=full is requested for the first time (otherwise unchanged bug reports will not be downloaded again, even if the boring bits have not been downloaded).

--no-force-refresh

Suppress any configuration file --force-refresh option.

--only-new

Download only new bugs when caching. Do not check for updates in bugs we already have.

--include-resolved

When caching bug reports, include those that are marked as resolved. This is the default behaviour.

--no-include-resolved

Reverse the behaviour of the previous option. That is, do not cache bugs that are marked as resolved.

--no-ack

Suppress acknowledgment mails from the

BTS.

Note that this will only affect the copies of messages CCed to bugs, not those sent to the control bot.

--ack

Do not suppress acknowledgement mails. This is the default behaviour.

-i, --interactive

Before sending an e-mail to the control bot, display the content and allow it to be edited, or the sending cancelled.

--force-interactive

Similar to --interactive, with the exception that an editor is spawned before prompting for confirmation of the message to be sent.

--no-interactive

Send control e-mails without confirmation. This is the default behaviour.

-q, --quiet

When running bts cache, only display information about newly cached pages, not messages saying already cached. If this option is specified twice, only output error messages (to stderr).

--no-conf, --noconf

Do not read any configuration files. This can only be used as the first option given on the command-line.

COMMANDS

For full details about the commands, see the documentation. <www.debian.org/Bugs/server-control>

show [options] [bug number | package | maintainer | : ] [opt=val ...]

show [options] [src:package | from:submitter] [opt=val ...]

show [options] [tag:tag | usertag:tag ] [opt=val ...]

show [release-critical | release-critical/... |

RC

]

This is a synonym for bts bugs.

bugs [options] [bug_number | package | maintainer | : ] [opt=val ...]

bugs [options] [src:package | from:submitter] [opt=val ...]

bugs [options] [tag:tag | usertag:tag ] [opt=val ...]

bugs [release-critical | release-critical/... |

RC

]

Display the page listing the requested bugs in a web browser using sensible-browser(1).

Options may be specified after the bugs command in addition to or instead of options at the start of the command line: recognised options at this point are: -o/--offline/--online, -m/--mbox, --mailreader and --[no-]cache. These are described earlier in this manpage. If either the -o or --offline option is used, or there is already an up-to-date copy in the local cache, the cached version will be used.

The meanings of the possible arguments are as follows:

(none)

If nothing is specified, bts bugs will display your bugs, assuming that either

DEBEMAIL

or

EMAIL

(examined in that order) is set to the appropriate email address.

bug_number

Display bug number bug_number.

package

Display the bugs for the package package.

src:package

Display the bugs for the source package package.

maintainer

Display the bugs for the maintainer email address maintainer.

from:submitter

Display the bugs for the submitter email address submitter.

tag:tag

Display the bugs which are tagged with tag.

usertag:tag

Display the bugs which are tagged with usertag tag. See the

BTS

documentation for more information on usertags. This will require the use of a users=email option.

:

Details of the bug tracking system itself, along with a bug-request page with more options than this script, can be found on bugs.debian.org This page itself will be opened if the command 'bts bugs :' is used.

release-critical,

RC

Display the front page of the release-critical pages on the

BTS.

This is a synonym for bugs.debian.org/release-critical/index.html It is also possible to say release-critical/debian/main.html and the like.

RC

is a synonym for release-critical/other/all.html.

After the argument specifying what to display, you can optionally specify options to use to format the page or change what it displayed. These are passed to the

BTS

in the

URL

downloaded. For example, pass dist=stable to see bugs affecting the stable version of a package, version=1.0 to see bugs affecting that version of a package, or reverse=yes to display newest messages first in a bug log.

If caching has been enabled (that is, --no-cache has not been used, and

BTS_CACHE

has not been set to no), then any page requested by bts show will automatically be cached, and be available offline thereafter. Pages which are automatically cached in this way will be deleted on subsequent "bts show|bugs|cache`` invocations if they have not been accessed in 30 days. Warning: on a filesystem mounted with the ''noatime`` option, running ''bts show|bugs" does not update the cache files' access times; a cached bug will then be subject to auto-cleaning 30 days after its initial download, even if it has been accessed in the meantime.

Any other bts commands following this on the command line will be executed after the browser has been exited.

The desired browser can be specified and configured by setting the

BROWSER

environment variable. The conventions follow those defined by Eric Raymond at www.catb.org/~esr/BROWSER/; we here reproduce the relevant part.

The value of

BROWSER

may consist of a colon-separated series of browser command parts. These should be tried in order until one succeeds. Each command part may optionally contain the string %s; if it does, the

URL

to be viewed is substituted there. If a command part does not contain %s, the browser is to be launched as if the

URL

had been supplied as its first argument. The string %% must be substituted as a single %.

Rationale: We need to be able to specify multiple browser commands so programs obeying this convention can do the right thing in either X or console environments, trying X first. Specifying multiple commands may also be useful for people who share files like .profile across multiple systems. We need %s because some popular browsers have remote-invocation syntax that requires it. Unless %% reduces to %, it won't be possible to have a literal %s in the string.

For example, on most Linux systems a good thing to do would be:

BROWSER='mozilla -raise -remote ``openURL(%s,new-window)'':links'

select [key:value ...]

Uses the

SOAP

interface to output a list of bugs which match the given selection requirements.

The following keys are allowed, and may be given multiple times.

package

Binary package name.

source

Source package name.

maintainer

E-mail address of the maintainer.

submitter

E-mail address of the submitter.

severity

Bug severity.

status

Status of the bug. One of open, done, or forwarded.

tag

Tags applied to the bug. If users is specified, may include usertags in addition to the standard tags.

owner

Bug's owner.

correspondent

Address of someone who sent mail to the log.

affects

Bugs which affect this package.

bugs

List of bugs to search within.

users

Users to use when looking up usertags.

archive

Whether to search archived bugs or normal bugs; defaults to 0 (i.e. only search normal bugs). As a special case, if archive is both, both archived and unarchived bugs are returned.

For example, to select the set of bugs submitted by jrandomdeveloper@example.com and tagged wontfix, one would use

bts select submitter:jrandomdeveloper@example.com tag:wontfix

If a key is used multiple times then the set of bugs selected includes those matching any of the supplied values; for example

bts select package:foo severity:wishlist severity:minor

returns all bugs of package foo with either wishlist or minor severity.

status [bug | file:file | fields:field[,field ...] | verbose] ...

Uses the

SOAP

interface to output status information for the given bugs (or as read from the listed files --- use - to indicate

STDIN

).

By default, all populated fields for a bug are displayed.

If verbose is given, empty fields will also be displayed.

If fields is given, only those fields will be displayed. No validity checking is performed on any specified fields.

clone bug new_ID [new_ID ...]

The clone control command allows you to duplicate a bug report. It is useful in the case where a single report actually indicates that multiple distinct bugs have occurred. ``New IDs'' are negative numbers, separated by spaces, which may be used in subsequent control commands to refer to the newly duplicated bugs. A new report is generated for each new

ID.

done bug [version]

Mark a bug as Done. This forces interactive mode since done messages should include an explanation why the bug is being closed. You should specify which version of the package closed the bug, if possible.

reopen bug [submitter]

Reopen a bug, with optional submitter.

archive bug

Archive a bug that has previously been archived but is currently not. The bug must fulfil all of the requirements for archiving with the exception of those that are time-based.

unarchive bug

Unarchive a bug that is currently archived.

retitle bug title

Change the title of the bug.

summary bug [messagenum]

Select a message number that should be used as the summary of a bug.

If no message number is given, the summary is cleared.

submitter bug [bug ...] submitter-email

Change the submitter address of a bug or a number of bugs, with ! meaning `use the address on the current email as the new submitter address'.

reassign bug [bug ...] package [version]

Reassign a bug or a number of bugs to a different package. The version field is optional; see the explanation at <www.debian.org/Bugs/server-control>.

found bug [version]

Indicate that a bug was found to exist in a particular package version. Without version, the list of fixed versions is cleared and the bug is reopened.

notfound bug version

Remove the record that bug was encountered in the given version of the package to which it is assigned.

fixed bug version

Indicate that a bug was fixed in a particular package version, without affecting the bug's open/closed status.

notfixed bug version

Remove the record that a bug was fixed in the given version of the package to which it is assigned.

This is equivalent to the sequence of commands "found bug version``, ''notfound bug version".

block bug by|with bug [bug ...]

Note that a bug is blocked from being fixed by a set of other bugs.

unblock bug by|with bug [bug ...]

Note that a bug is no longer blocked from being fixed by a set of other bugs.

merge bug bug [bug ...]

Merge a set of bugs together.

forcemerge bug bug [bug ...]

Forcibly merge a set of bugs together. The first bug listed is the master bug, and its settings (those which must be equal in a normal merge) are assigned to the bugs listed next.

unmerge bug

Unmerge a bug.

tag bug [+|-|=] tag [tag ...]

tags bug [+|-|=] tag [tag ...]

Set or unset a tag on a bug. The tag may either be the exact tag name or it may be abbreviated to any unique tag substring. (So using fixed will set the tag fixed, not fixed-upstream, for example, but fix would not be acceptable.) Multiple tags may be specified as well. The two commands (tag and tags) are identical. At least one tag must be specified, unless the = flag is used, where the command

  bts tags <bug> =

will remove all tags from the specified bug.

Adding/removing the security tag will add ``team\@security.debian.org'' to the Cc list of the control email.

affects bug [+|-|=] package [package ...]

Indicates that a bug affects a package other than that against which it is filed, causing the bug to be listed by default in the package list of the other package. This should generally be used where the bug is severe enough to cause multiple reports from users to be assigned to the wrong package. At least one package must be specified, unless the = flag is used, where the command

  bts affects <bug> =

will remove all indications that bug affects other packages.

user email

Specify a user email address before using the usertags command.

usertag bug [+|-|=] tag [tag ...]

usertags bug [+|-|=] tag [tag ...]

Set or unset a user tag on a bug. The tag must be the exact tag name wanted; there are no defaults or checking of tag names. Multiple tags may be specified as well. The two commands (usertag and usertags) are identical. At least one tag must be specified, unless the = flag is used, where the command

  bts usertags <bug> =

will remove all user tags from the specified bug.

claim bug [claim]

Record that you have claimed a bug (e.g. for a bug squashing party). claim should be a unique token allowing the bugs you have claimed to be identified; an e-mail address is often used.

If no claim is specified, the environment variable

DEBEMAIL

or

EMAIL

(checked in that order) is used.

unclaim bug [claim]

Remove the record that you have claimed a bug.

If no claim is specified, the environment variable

DEBEMAIL

or

EMAIL

(checked in that order) is used.

severity bug severity

Change the severity of a bug. Available severities are: wishlist, minor, normal, important, serious, grave, critical. The severity may be abbreviated to any unique substring.

forwarded bug address

Mark the bug as forwarded to the given address (usually an email address or a

URL

for an upstream bug tracker).

notforwarded bug

Mark a bug as not forwarded.

package [package ...]

The following commands will only apply to bugs against the listed packages; this acts as a safety mechanism for the

BTS.

If no packages are listed, this check is turned off again.

limit [key[:value]] ...

The following commands will only apply to bugs which meet the specified criterion; this acts as a safety mechanism for the

BTS.

If no values are listed, the limits for that key are turned off again. If no keys are specified, all limits are reset.

submitter

E-mail address of the submitter.

date

Date the bug was submitted.

subject

Subject of the bug.

msgid

Message-id of the initial bug report.

package

Binary package name.

source

Source package name.

tag

Tags applied to the bug.

severity

Bug severity.

owner

Bug's owner.

affects

Bugs affecting this package.

archive

Whether to search archived bugs or normal bugs; defaults to 0 (i.e. only search normal bugs). As a special case, if archive is both, both archived and unarchived bugs are returned.

For example, to limit the set of bugs affected by the subsequent control commands to those submitted by jrandomdeveloper@example.com and tagged wontfix, one would use

bts limit submitter:jrandomdeveloper@example.com tag:wontfix

If a key is used multiple times then the set of bugs selected includes those matching any of the supplied values; for example

bts limit package:foo severity:wishlist severity:minor

only applies the subsequent control commands to bugs of package foo with either wishlist or minor severity.

owner bug owner-email

Change the ``owner'' address of a bug, with ! meaning `use the address on the current email as the new owner address'.

The owner of a bug accepts responsibility for dealing with it.

noowner bug

Mark a bug as having no ``owner''.

subscribe bug [email]

Subscribe the given email address to the specified bug report. If no email address is specified, the environment variable

DEBEMAIL

or

EMAIL

(in that order) is used. If those are not set, or ! is given as email address, your default address will be used.

After executing this command, you will be sent a subscription confirmation to which you have to reply. When subscribed to a bug report, you receive all relevant emails and notifications. Use the unsubscribe command to unsubscribe.

unsubscribe bug [email]

Unsubscribe the given email address from the specified bug report. As with subscribe above, if no email address is specified, the environment variables

DEBEMAIL

or

EMAIL

(in that order) is used. If those are not set, or ! is given as email address, your default address will be used.

After executing this command, you will be sent an unsubscription confirmation to which you have to reply. Use the subscribe command to, well, subscribe.

reportspam bug ...

The reportspam command allows you to report a bug report as containing spam. It saves one from having to go to the bug web page to do so.

spamreport bug ...

spamreport is a synonym for reportspam.

cache [options] [maint_email | pkg | src:pkg | from:submitter]

cache [options] [release-critical | release-critical/... |

RC

]

Generate or update a cache of bug reports for the given email address or package. By default it downloads all bugs belonging to the email address in the

DEBEMAIL

environment variable (or the

EMAIL

environment variable if

DEBEMAIL

is unset). This command may be repeated to cache bugs belonging to several people or packages. If multiple packages or addresses are supplied, bugs belonging to any of the arguments will be cached; those belonging to more than one of the arguments will only be downloaded once. The cached bugs are stored in $XDG_CACHE_HOME/devscripts/bts/ or, if

XDG_CACHE_HOME

is not set, in ~/.cache/devscripts/bts/.

You can use the cached bugs with the -o switch. For example:

  bts -o bugs
  bts -o show 12345

Also, bts will update the files in it in a piecemeal fashion as it downloads information from the

BTS

using the show command. You might thus set up the cache, and update the whole thing once a week, while letting the automatic cache updates update the bugs you frequently refer to during the week.

Some options affect the behaviour of the cache command. The first is the setting of --cache-mode, which controls how much bts downloads of the referenced links from the bug page, including boring bits such as the acknowledgement emails, emails to the control bot, and the mbox version of the bug report. It can take three values: min (the minimum), mbox (download the minimum plus the mbox version of the bug report) or full (the whole works). The second is --force-refresh or -f, which forces the download, even if the cached bug report is up-to-date. The --include-resolved option indicates whether bug reports marked as resolved should be downloaded during caching.

Each of these is configurable from the configuration file, as described below. They may also be specified after the cache command as well as at the start of the command line.

Finally, -q or --quiet will suppress messages about caches being up-to-date, and giving the option twice will suppress all cache messages (except for error messages).

Beware of caching

RC,

though: it will take a

LONG

time! (With 1000+

RC

bugs and a delay of 5 seconds between bugs, you're looking at a minimum of 1.5 hours, and probably significantly more than that.)

cleancache package | src:package | maintainer

cleancache from:submitter | tag:tag | usertag:tag | number |

ALL

Clean the cache for the specified package, maintainer, etc., as described above for the bugs command, or clean the entire cache if

ALL

is specified. This is useful if you are going to have permanent network access or if the database has become corrupted for some reason. Note that for safety, this command does not default to the value of

DEBEMAIL

or

EMAIL

.

listcachedbugs [number]

List cached bug ids (intended to support bash completion). The optional number argument restricts the list to those bug ids that start with that number.

version

Display version and copyright information.

help

Display a short summary of commands, suspiciously similar to parts of this man page.

ENVIRONMENT VARIABLES

DEBEMAIL

If this is set, the From: line in the email will be set to use this email address instead of your normal email address (as would be determined by mail).

DEBFULLNAME

If

DEBEMAIL

is set,

DEBFULLNAME

is examined to determine the full name to use; if this is not set, bts attempts to determine a name from your passwd entry.

BROWSER

If set, it specifies the browser to use for the show and bugs options. See the description above.

CONFIGURATION VARIABLES

The two configuration files /etc/devscripts.conf and ~/.devscripts are sourced by a shell in that order to set configuration variables. Command line options can be used to override configuration file settings. Environment variable settings are ignored for this purpose. The currently recognised variables are:

BTS_OFFLINE

If this is set to yes, then it is the same as the --offline command line parameter being used. Only has an effect on the show and bugs commands. The default is no. See the description of the show command above for more information.

BTS_CACHE

If this is set to no, then it is the same as the --no-cache command line parameter being used. Only has an effect on the show and bug commands. The default is yes. Again, see the show command above for more information.

BTS_CACHE_MODE={min,mbox,full}

How much of the

BTS

should we mirror when we are asked to cache something? Just the minimum, or also the mbox or the whole thing? The default is min, and it has the same meaning as the --cache-mode command line parameter. Only has an effect on the cache. See the cache command for more information.

BTS_FORCE_REFRESH

If this is set to yes, then it is the same as the --force-refresh command line parameter being used. Only has an effect on the cache command. The default is no. See the cache command for more information.

BTS_MAIL_READER

If this is set, specifies a mail reader to use instead of mutt. Same as the --mailreader command line option.

BTS_SENDMAIL_COMMAND

If this is set, specifies a sendmail command to use instead of /usr/sbin/sendmail. Same as the --sendmail command line option.

BTS_ONLY_NEW

Download only new bugs when caching. Do not check for updates in bugs we already have. The default is no. Same as the --only-new command line option.

BTS_SMTP_HOST

If this is set, specifies an

SMTP

host to use for sending mail rather than using the sendmail command. Same as the --smtp-host command line option.

Note that this option takes priority over

BTS_SENDMAIL_COMMAND

if both are set, unless the --sendmail option is used.

BTS_SMTP_AUTH_USERNAME

,

BTS_SMTP_AUTH_PASSWORD

If these options are set, then it is the same as the --smtp-username and --smtp-password options being used.

BTS_SMTP_HELO

Same as the --smtp-helo command line option.

BTS_INCLUDE_RESOLVED

If this is set to no, then it is the same as the --no-include-resolved command line parameter being used. Only has an effect on the cache command. The default is yes. See the cache command for more information.

BTS_SUPPRESS_ACKS

If this is set to yes, then it is the same as the --no-ack command line parameter being used. The default is no.

BTS_INTERACTIVE

If this is set to yes or force, then it is the same as the --interactive or --force-interactive command line parameter being used. The default is no.

BTS_DEFAULT_CC

Specify a list of e-mail addresses to which a carbon copy of the generated e-mail to the control bot should automatically be sent.

BTS_SERVER

Specify the name of a debbugs server which should be used instead of bugs.debian.org

SEE ALSO

Please see <www.debian.org/Bugs/server-control> for more details on how to control the using emails and <www.debian.org/Bugs> for more information about the

querybts(1), reportbug(1), pts-subscribe(1)

COPYRIGHT

This program is Copyright (C) 2001-2003 by Joey Hess <joeyh@debian.org>. Many modifications have been made, Copyright (C) 2002-2005 Julian Gilbey <jdg@debian.org> and Copyright (C) 2007 Josh Triplett <josh@freedesktop.org>.

It is licensed under the terms of the

either version 2 of the License, or (at your option) any later version.