NAMEautopkgtest - test an installed binary package using the source package's tests
SYNOPSISautopkgtest [options...] testsrc [testbinary...] -- virt-server [virt-server-arg...]
DESCRIPTIONautopkgtest runs tests on binary Debian or Click packages, as installed on a system (called "testbed"). The tests are supplied in the source package.
autopkgtest runs each test supplied by a particular package and reports the results. It drives the specified virtualisation regime as appropriate, parses the test description metadata, and arranges for data to be copied to and from the testbed as required.
See /usr/share/doc/autopkgtest/README.running-tests.rst.gz for an introduction about how to use autopkgtest.
TESTING A DEBIAN PACKAGE
Positional (non-option) arguments specify exactly one source package (containing the test code) and optionally some binary packages to test.
testsrc can be one of:
- .dsc file
Run tests from Debian .dsc source package. By default the package will
also be built and the resulting binaries will be used to satisfy test
dependencies; to disable that, specify the
- source package directory
Run tests from a Debian source tree directory. If that is an unbuilt tree,
this is very similar to specifying a .dsc. If that is a built tree, all
test dependencies get satisfied by archive packages, unless you explicitly
specify locally built .debs as well.
Attention: If you just specify a bare directory name which is a legal Debian source package name, it will be interpreted as the latter (see below). In this case, prefix the directory name with ./.
- current directory
If no source package is specified on the command line and the current directory
is a Debian source package, this will be tested.
- source package name
Downloads the given source package name with apt-get source in the
testbed and run its tests. This is similar to specifying a .dsc
but avoids copying the source from the host to the testbed. Possibly built
binaries (if the test specifies
be used to satisfy dependencies, as usually in this mode you want to test
binaries from a real archive.
- git URL or URL#branch
Git-clones the given URL (which must contain an unbuilt Debian source tree) and
runs the tests from that.
is given, this branch will be checked out instead of the default (usually
"master"). This can also be a more general refspec such as #refs/pull/123/head"
for a GitHub pull request.
This is very similar to cloning manually and specifying the checkout directory as test; i. e. this is commonly used with --no-built-binaries. The git package will be installed if necessary.
- .changes file
Run tests from the .dsc source package in the given .changes file. If
the .changes contains .deb packages, they will be used for the test.
Acts as if you had specified the .debs and .dsc from the .changes file as
explicit arguments. Note that if the .changes contains
debs, the corresponding .dsc still needs to be specified alongside, or the
current directory must be the source package.
All other positional arguments must be .deb binary packages. They will be used
for both build and test dependencies of the source package. If any binary
package is given, then
TESTING A CLICK PACKAGE
This needs exactly one .click package. If its manifest specifies an x-source URL, the corresponding source package will be downloaded and tests run from there; then a source directory does not need to be given. Otherwise specifying a source directory as positional argument is mandatory.
For testing a local .click package, give its path to autopkgtest. For testing a preinstalled click, use --installed-click com.example.myclick (this cannot be given as positional argument as this cannot be disambiguated from Debian source package names).
Examples with explicit click source directory:
autopkgtest src/myclick_0.1_all.click com.example.myclick src/myclick/ -- [...]
autopkgtest --installed-click com.example.myclick src/myclick/ -- [...]
Examples without click source directory; click package needs to have x-source manifest entry:
autopkgtest src/myclick_0.1_all.click -- [...]
autopkgtest --installed-click com.example.myclick -- [...]
- -B | --no-built-binaries
Binaries from unbuilt source packages (see above)
will not be built or ignored, and dependencies are satisfied with packages from
the archive. Note that the source package still gets built if a test requires
Read the test metadata from
(for Debian sources)
or the Click manifest.
Run only the given test name (from test control file). This replaces
--testname which is deprecated.
LOGGING OPTIONSIf you don't specify any option, autopkgtest only writes its output/results to stderr.
- -o dir | --output-dir=dir
Specifies that test artifacts (stderr and stdout from the tests, the log file,
built binary packages etc.) should be placed in the given directory.
dir must not exist yet or be empty, otherwise
will refuse to use it.
- -l logfile | --log-file=logfile
Specifies that the trace log should be written to logfile
instead of to output-dir.
Specifies that a summary of the outcome should be written to
summary. The events in the summary are written to the log
in any case.
- -q | --quiet
Do not send a copy of autopkgtest's trace logstream to stderr. This
option does not affect the copy sent to logfile or
output-dir. Note that without the trace
logstream it can be very hard to diagnose problems.
TEST BED SETUP OPTIONS
after opening the testbed. This can be used e. g. to enable additional apt
is an existing file name, the commands are read from that; otherwise it
is a string with the actual commands that gets run as-is. File names
without directory will be searched in both the current directory and in
so you do not need to give the full path for setup scripts shipped with
Normally, if the setup commands fail, autopkgtest will consider this a transient testbed error (exit code 16). However, if the setup commands exit with code 100, autopkgtest will consider this an "erroneous package" (exit code 12) instead, so this can be used to e. g. detect upgrade errors to a new version. Note that apt exits with exit code 100 in these cases.
This option can be specified multiple times.
If --user is given or the test bed provides a suggested-normal-user capability, the $AUTOPKGTEST_NORMAL_USER environment variable will be set to that user.
If the setup commands affect anything in boot directories (like /boot or /lib/systemd/system) and the testbed supports rebooting, the testbed will be rebooted after the setup commands. This can be suppressed by creating a file /run/autopkgtest_no_reboot.stamp.
and after every reboot. For example, these commands could be used to
add files in a tmpfs.
These commands never cause the testbed to be rebooted (because that could lead to an infinite loop). Otherwise, they are just like the --setup-commands.
This option can be specified multiple times.
- --apt-upgrade | -U
apt-get dist-upgrade -y
in the testbed before running the tests.
Add apt sources for release-pocket. This finds the first
which does not already specify a pocket and adds a deb and deb-src line with
that pocket to
This also calls
for the new pocket (but not for anything else).
If a package list is given after =, set up apt pinning to use only those packages from pocket. An entry "src:srcname" expands to all binary packages built by that source. This can be used for minimizing dependencies taken from pocket so that package updates in that pocket can be tested independently from each other for better isolation. Attention: This does not currently resolve some situations where dependencies of the given packages can only be resolved in the given pocket. In that case the apt pinning will be removed and package installation will be retried with the entirety of pocket.
Copy file or directory from host into testbed after opening. This happens
thus you can use these files in the setup commands.
Set arbitrary environment variable in the build and test. Can be specified
USER/PRIVILEGE HANDLING OPTIONS
- -u user | --user=user
Run builds and tests as user on the testbed. This needs root on
the testbed; if root on the testbed is not available then builds and
tests run as whatever user is provided.
The default is not to use anything, except that if
--user is supplied or root on the testbed is not available the
default is fakeroot.
Include additional debugging information in the trace log. Each
additional -d increases the debugging level; the current maximum
is -ddd. If you like to see what's going on, -d or
-dd is recommended.
- Run an interactive shell in the testbed after a failed build, test, or dependency installation.
Run an interactive shell in the testbed after every test.
Use a different timeout for operations on or with the testbed. There
are five timeouts affected by five values of which:
short operations like setting up the testbed's apt and checking the
state (default: 100s);
installation of packages including dependencies
test runs (default: 10,000s);
copy files/directories between host and testbed
(default: 300s); and
100,000s). The value must be specified as an integer number of seconds.
Multiply all of the default timeouts by the specified factor (see
--timeout-which above). Only the defaults are affected;
explicit timeout settings are used exactly as specified.
When running commands on the testbed, sets the LANG environment
variable to langval. The default in autopkgtest is to set it
Disable automatic test generation with autodep8, even if it is installed. In
that case, packages without tests will exit with code 8 ("No tests in this
package") just like without autodep8.
DEB_BUILD_OPTION for building packages. By default this is the number of
available processors. This is mostly useful in containers where you can
restrict the available RAM, but not restrict the number of CPUs.
Show command line help and exit.
- -- virt-server virt-server-arg...
Specifies the virtualisation regime server, as a command and arguments
must be an existing autopkgtest virtualization server such as
All the remaining arguments and options after -- are passed to the virtualisation server program. See the manpages of the individual servers for how to use them.
OUTPUT FORMATDuring a normal test run, one line is printed for each test. This consists of a short string identifying the test, some horizontal whitespace, and either PASS or FAIL reason or SKIP reason where the pass/fail indication is separated by any reason by some horizontal whitespace.
The string to identify the test consists of a short alphanumeric string invented by autopkgtest to distinguish different command-line arguments, the argid, followed by a hyphen and the test name.
Sometimes a SKIP will be reported when the name of the test is not known or not applicable: for example, when there are no tests in the package, or a there is a test stanza which contains features not understood by this version of autopkgtest. In this case * will appear where the name of the test should be.
If autopkgtest detects that erroneous package(s) are involved, it will print the two lines blame: blamed-thing... and badpkg: message. Here each whitespace-separated blamed-thing is one of arg:argument (representing a pathname found in a command line argument), dsc:package (a source package name), deb:package (a binary package name) or possibly other strings to be determined. This indicates which arguments and/or packages might have contributed to the problem; the ones which were processed most recently and which are therefore most likely to be the cause of a problem are listed last.
If you use lots of options or nontrivial virt server arguments, you can put any part of the command line into a text file, with one line per option. E. g. you can create a file sid.cfg with contents like
- -s --output-dir=/tmp/testout --apt-upgrade -- schroot sid
and then run
- autopkgtest foo_1_amd64.changes @sid.cfg
The contents of the configuration file will be expanded in-place as if you would have given its contents on the command line. Please ensure that you don't place spaces between short options and their values, they would become a part of the argument value.
EXIT STATUS0 all tests passed
2 at least one test skipped
4 at least one test failed
6 at least one test failed and at least one test skipped
8 no tests in this package
12 erroneous package
16 testbed failure
20 other unexpected failures including bad usage
AUTHORS AND COPYRIGHTThis manpage is part of autopkgtest, a tool for testing Debian binary packages. autopkgtest is Copyright (C) 2006-2014 Canonical Ltd.
See /usr/share/doc/autopkgtest/CREDITS for the list of contributors and full copying conditions.