VNC Viewer Free Edition 4.1.1 for X - built Feb 25 2015 22:57:51 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. usage: xvncviewer [-4|-6] [parameters] [host:displayNum] [parameters] xvncviewer [parameters] -listen [port] [parameters] Parameters can be turned on with -<param> or off with -<param>=0 Parameters which take a value can be specified as -<param> <value> Other valid forms are <param>=<value> -<param>=<value> --<param>=<value> Parameter names are case-insensitive. The parameters are: Global Parameters: ZlibLevel - Zlib compression level (default=-1) Log - Specifies which log output should be directed to which target logger, and the level of output to log. Format is <log>:<target>:<level>[, ...]. (default=) via - Gateway to tunnel via (default=) XEmbed - Embed into another window with a given id (default=) display - The X display (default=) geometry - X geometry specification (default=) XDialog - Popup an X dialog when asking for server, username and password. Default no when running from command line (default=0) listen - Listen for connections from VNC servers (default=0) SendPrimary - Send the primary selection and cut buffer to the server as well as the clipboard selection (default=1) SendClipboard - Send clipboard changes to the server (default=1) AcceptClipboard - Accept clipboard changes from the server (default=1) Shared - Don't disconnect other viewers upon connection - share the desktop instead (default=0) ViewOnly - Don't send any mouse or keyboard events to the server (default=0) FullScreen - Full screen mode (default=0) PreferredEncoding - Preferred encoding to use (ZRLE, hextile or raw) - implies AutoSelect=0 (default=) LowColourLevel - Colour level to use on slow connections. 0 = Very Low (8 colours), 1 = Low (64 colours), 2 = Medium (256 colours) (default=1) FullColor - Alias for FullColour FullColour - Use full colour - otherwise low colour level is used until AutoSelect decides the link is fast enough (default=0) AutoSelect - Auto select pixel format and encoding (default=1) DotWhenNoCursor - Show the dot cursor when the server sends an invisible cursor (default=1) UseLocalCursor - Render the mouse cursor locally (default=1) passwd - Alias for PasswordFile PasswordFile - Password file for VNC authentication (default=) WMDecorationHeight - Height of window manager decoration around a window (default=24) WMDecorationWidth - Width of window manager decoration around a window (default=6) PointerEventInterval - Time in milliseconds to rate-limit successive pointer events (default=0) name - The X window name (default=) MenuKey - The key which brings up the popup menu (default=F8) DebugDelay - Milliseconds to display inverted pixel data - a debugging feature (default=0)

VNC Viewer Free Edition 4.1.1 for X - built Feb 25 2015 22:57:51 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. usage: xvncviewer [-4|-6] [parameters] [host:displayNum] [parameters] xvncviewer [parameters] -listen [port] [parameters] Parameters can be turned on with -<param> or off with -<param>=0 Parameters which take a value can be specified as -<param> <value> Other valid forms are <param>=<value> -<param>=<value> --<param>=<value> Parameter names are case-insensitive. The parameters are: Global Parameters: ZlibLevel - Zlib compression level (default=-1) Log - Specifies which log output should be directed to which target logger, and the level of output to log. Format is <log>:<target>:<level>[, ...]. (default=) via - Gateway to tunnel via (default=) XEmbed - Embed into another window with a given id (default=) display - The X display (default=) geometry - X geometry specification (default=) XDialog - Popup an X dialog when asking for server, username and password. Default no when running from command line (default=0) listen - Listen for connections from VNC servers (default=0) SendPrimary - Send the primary selection and cut buffer to the server as well as the clipboard selection (default=1) SendClipboard - Send clipboard changes to the server (default=1) AcceptClipboard - Accept clipboard changes from the server (default=1) Shared - Don't disconnect other viewers upon connection - share the desktop instead (default=0) ViewOnly - Don't send any mouse or keyboard events to the server (default=0) FullScreen - Full screen mode (default=0) PreferredEncoding - Preferred encoding to use (ZRLE, hextile or raw) - implies AutoSelect=0 (default=) LowColourLevel - Colour level to use on slow connections. 0 = Very Low (8 colours), 1 = Low (64 colours), 2 = Medium (256 colours) (default=1) FullColor - Alias for FullColour FullColour - Use full colour - otherwise low colour level is used until AutoSelect decides the link is fast enough (default=0) AutoSelect - Auto select pixel format and encoding (default=1) DotWhenNoCursor - Show the dot cursor when the server sends an invisible cursor (default=1) UseLocalCursor - Render the mouse cursor locally (default=1) passwd - Alias for PasswordFile PasswordFile - Password file for VNC authentication (default=) WMDecorationHeight - Height of window manager decoration around a window (default=24) WMDecorationWidth - Width of window manager decoration around a window (default=6) PointerEventInterval - Time in milliseconds to rate-limit successive pointer events (default=0) name - The X window name (default=) MenuKey - The key which brings up the popup menu (default=F8) DebugDelay - Milliseconds to display inverted pixel data - a debugging feature (default=0)