usage: x0vnc4server [<parameters>] Parameters can be turned on with -<param> or off with -<param>=0 Parameters which take a value can be specified as -<param> <value> Other valid forms are <param>=<value> -<param>=<value> --<param>=<value> Parameter names are case-insensitive. The parameters are: Global Parameters: MaxCutText - Maximum permitted length of an incoming clipboard update (default=262144) ZlibLevel - Zlib compression level (default=-1) Password - Obfuscated binary encoding of the password which clients must supply to access the server (default=) PasswordFile - Password file for VNC authentication (default=) ReverseSecurityTypes - Specify encryption scheme to use for reverse connections (None) (default=None) SecurityTypes - Specify which security scheme to use for incoming connections (None, VncAuth) (default=VncAuth) QueryConnect - Prompt the local user to accept or reject incoming connections. (default=0) SendCutText - Send clipboard changes to clients. (default=1) AcceptCutText - Accept clipboard updates from clients. (default=1) AcceptPointerEvents - Accept pointer press and release events from clients. (default=1) AcceptKeyEvents - Accept key press and release events from clients. (default=1) DisconnectClients - Disconnect existing clients if an incoming connection is non-shared. If combined with NeverShared then new connections will be refused while there is a client active (default=1) NeverShared - Never treat incoming connections as shared, regardless of the client-specified setting (default=0) AlwaysShared - Always treat incoming connections as shared, regardless of the client-specified setting (default=0) Protocol3.3 - Always use protocol version 3.3 for backwards compatibility with badly-behaved clients (default=0) CompareFB - Perform pixel comparison on framebuffer to reduce unnecessary updates (default=1) ClientWaitTimeMillis - The number of milliseconds to wait for a client which is no longer responding (default=20000) IdleTimeout - The number of seconds after which an idle VNC connection will be dropped (zero means no timeout) (default=0) RemapKeys - Comma-separated list of incoming keysyms to remap. Mappings are expressed as two hex values, prefixed by 0x, and separated by -> (default=) BlacklistTimeout - The initial timeout applied when a host is first black-listed. The host cannot re-attempt a connection until the timeout expires. (default=10) BlacklistThreshold - The number of unauthenticated connection attempts allowed from any individual host before that host is black-listed (default=5) Log - Specifies which log output should be directed to which target logger, and the level of output to log. Format is <log>:<target>:<level>[, ...]. (default=) QueryConnectTimeout - Number of seconds to show the Accept Connection dialog before rejecting the connection (default=10) localhost - Only allow connections from localhost (default=0) rfbport - TCP port to listen for RFB protocol (default=5900) display - The X display (default=) ~ImageCleanup called

usage: x0vnc4server [<parameters>] Parameters can be turned on with -<param> or off with -<param>=0 Parameters which take a value can be specified as -<param> <value> Other valid forms are <param>=<value> -<param>=<value> --<param>=<value> Parameter names are case-insensitive. The parameters are: Global Parameters: MaxCutText - Maximum permitted length of an incoming clipboard update (default=262144) ZlibLevel - Zlib compression level (default=-1) Password - Obfuscated binary encoding of the password which clients must supply to access the server (default=) PasswordFile - Password file for VNC authentication (default=) ReverseSecurityTypes - Specify encryption scheme to use for reverse connections (None) (default=None) SecurityTypes - Specify which security scheme to use for incoming connections (None, VncAuth) (default=VncAuth) QueryConnect - Prompt the local user to accept or reject incoming connections. (default=0) SendCutText - Send clipboard changes to clients. (default=1) AcceptCutText - Accept clipboard updates from clients. (default=1) AcceptPointerEvents - Accept pointer press and release events from clients. (default=1) AcceptKeyEvents - Accept key press and release events from clients. (default=1) DisconnectClients - Disconnect existing clients if an incoming connection is non-shared. If combined with NeverShared then new connections will be refused while there is a client active (default=1) NeverShared - Never treat incoming connections as shared, regardless of the client-specified setting (default=0) AlwaysShared - Always treat incoming connections as shared, regardless of the client-specified setting (default=0) Protocol3.3 - Always use protocol version 3.3 for backwards compatibility with badly-behaved clients (default=0) CompareFB - Perform pixel comparison on framebuffer to reduce unnecessary updates (default=1) ClientWaitTimeMillis - The number of milliseconds to wait for a client which is no longer responding (default=20000) IdleTimeout - The number of seconds after which an idle VNC connection will be dropped (zero means no timeout) (default=0) RemapKeys - Comma-separated list of incoming keysyms to remap. Mappings are expressed as two hex values, prefixed by 0x, and separated by -> (default=) BlacklistTimeout - The initial timeout applied when a host is first black-listed. The host cannot re-attempt a connection until the timeout expires. (default=10) BlacklistThreshold - The number of unauthenticated connection attempts allowed from any individual host before that host is black-listed (default=5) Log - Specifies which log output should be directed to which target logger, and the level of output to log. Format is <log>:<target>:<level>[, ...]. (default=) QueryConnectTimeout - Number of seconds to show the Accept Connection dialog before rejecting the connection (default=10) localhost - Only allow connections from localhost (default=0) rfbport - TCP port to listen for RFB protocol (default=5900) display - The X display (default=) ~ImageCleanup called