smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-35-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org smartctl comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under the terms of the GNU General Public License; either version 2, or (at your option) any later version. See http://www.gnu.org for further details. smartmontools release 6.6 dated 2016-05-07 at 11:17:46 UTC smartmontools SVN rev 4324 dated 2016-05-31 at 20:45:50 smartmontools build host: x86_64-pc-linux-gnu smartmontools build with: C++98, GCC 5.4.0 20160609 smartmontools configure arguments: '--prefix=/usr' '--build=x86_64-linux-gnu' '--host=x86_64-linux-gnu' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=no' '--docdir=/usr/share/doc/smartmontools' '--with-savestates=/var/lib/smartmontools/smartd.' '--with-attributelog=/var/lib/smartmontools/attrlog.' '--with-exampledir=/usr/share/doc/smartmontools/examples/' '--with-drivedbdir=/var/lib/smartmontools/drivedb' '--with-systemdsystemunitdir=/lib/systemd/system' '--with-smartdscriptdir=/usr/share/smartmontools' '--with-smartdplugindir=/etc/smartmontools/smartd_warning.d' '--with-systemdenvfile=/etc/default/smartmontools' '--with-selinux' 'build_alias=x86_64-linux-gnu' 'host_alias=x86_64-linux-gnu' 'CXXFLAGS=-g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now' 'CPPFLAGS=-Wdate-time -D_FORTIFY_SOURCE=2' 'CFLAGS=-g -O2 -fPIE -fstack-protector-strong -Wformat -Werror=format-security -fsigned-char -Wall -O2'

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-35-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Usage: smartctl [options] device ============================================ SHOW INFORMATION OPTIONS ===== -h, --help, --usage Display this help and exit -V, --version, --copyright, --license Print license, copyright, and version information and exit -i, --info Show identity information for device --identify[=[w][nvb]] Show words and bits from IDENTIFY DEVICE data (ATA) -g NAME, --get=NAME Get device setting: all, aam, apm, lookahead, security, wcache, rcache, wcreorder -a, --all Show all SMART information for device -x, --xall Show all information for device --scan Scan for devices --scan-open Scan for devices and try to open each device ================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS ===== -q TYPE, --quietmode=TYPE (ATA) Set smartctl quiet mode to one of: errorsonly, silent, noserial -d TYPE, --device=TYPE Specify device type to one of: ata, scsi, nvme[,NSID], sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbprolific, usbsunplus, marvell, areca,N/E, 3ware,N, hpt,L/M/N, megaraid,N, aacraid,H,L,ID, cciss,N, auto, test -T TYPE, --tolerance=TYPE (ATA) Tolerance: normal, conservative, permissive, verypermissive -b TYPE, --badsum=TYPE (ATA) Set action on bad checksum to one of: warn, exit, ignore -r TYPE, --report=TYPE Report transactions (see man page) -n MODE, --nocheck=MODE (ATA) No check if: never, sleep, standby, idle (see man page) ============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS ===== -s VALUE, --smart=VALUE Enable/disable SMART on device (on/off) -o VALUE, --offlineauto=VALUE (ATA) Enable/disable automatic offline testing on device (on/off) -S VALUE, --saveauto=VALUE (ATA) Enable/disable Attribute autosave on device (on/off) -s NAME[,VALUE], --set=NAME[,VALUE] Enable/disable/change device setting: aam,[N|off], apm,[N|off], lookahead,[on|off], security-freeze, standby,[N|off|now], wcache,[on|off], rcache,[on|off], wcreorder,[on|off] ======================================= READ AND DISPLAY DATA OPTIONS ===== -H, --health Show device SMART health status -c, --capabilities (ATA, NVMe) Show device SMART capabilities -A, --attributes Show device SMART vendor-specific Attributes and values -f FORMAT, --format=FORMAT (ATA) Set output format for attributes: old, brief, hex[,id|val] -l TYPE, --log=TYPE Show device log. TYPE: error, selftest, selective, directory[,g|s], xerror[,N][,error], xselftest[,N][,selftest], background, sasphy[,reset], sataphy[,reset], scttemp[sts,hist], scttempint,N[,p], scterc[,N,M], devstat[,N], ssd, gplog,N[,RANGE], smartlog,N[,RANGE], nvmelog,N,SIZE -v N,OPTION , --vendorattribute=N,OPTION (ATA) Set display OPTION for vendor Attribute N (see man page) -F TYPE, --firmwarebug=TYPE (ATA) Use firmware bug workaround: none, nologdir, samsung, samsung2, samsung3, xerrorlba, swapid -P TYPE, --presets=TYPE (ATA) Drive-specific presets: use, ignore, show, showall -B [+]FILE, --drivedb=[+]FILE (ATA) Read and replace [add] drive database from FILE [default is +/etc/smart_drivedb.h and then /var/lib/smartmontools/drivedb/drivedb.h] ============================================ DEVICE SELF-TEST OPTIONS ===== -t TEST, --test=TEST Run test. TEST: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] -C, --captive Do test in captive mode (along with -t) -X, --abort Abort any non-captive test on device =================================================== SMARTCTL EXAMPLES ===== smartctl --all /dev/sda (Prints all SMART information) smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda (Enables SMART on first disk) smartctl --test=long /dev/sda (Executes extended disk self-test) smartctl --attributes --log=selftest --quietmode=errorsonly /dev/sda (Prints Self-Test & Attribute errors) smartctl --all --device=3ware,2 /dev/sda smartctl --all --device=3ware,2 /dev/twe0 smartctl --all --device=3ware,2 /dev/twa0 smartctl --all --device=3ware,2 /dev/twl0 (Prints all SMART info for 3rd ATA disk on 3ware RAID controller) smartctl --all --device=hpt,1/1/3 /dev/sda (Prints all SMART info for the SATA disk attached to the 3rd PMPort of the 1st channel on the 1st HighPoint RAID controller) smartctl --all --device=areca,3/1 /dev/sg2 (Prints all SMART info for 3rd ATA disk of the 1st enclosure on Areca RAID controller)