s3cmd version 1.6.1

Usage: s3cmd [options] COMMAND [parameters] S3cmd is a tool for managing objects in Amazon S3 storage. It allows for making and removing "buckets" and uploading, downloading and removing "objects" from these buckets. Options: -h, --help show this help message and exit --configure Invoke interactive (re)configuration tool. Optionally use as '--configure s3://some-bucket' to test access to a specific bucket instead of attempting to list them all. -c FILE, --config=FILE Config file name. Defaults to $HOME/.s3cfg --dump-config Dump current configuration after parsing config files and command line options and exit. --access_key=ACCESS_KEY AWS Access Key --secret_key=SECRET_KEY AWS Secret Key -n, --dry-run Only show what should be uploaded or downloaded but don't actually do it. May still perform S3 requests to get bucket listings and other information though (only for file transfer commands) -s, --ssl Use HTTPS connection when communicating with S3. (default) --no-ssl Don't use HTTPS. -e, --encrypt Encrypt files before uploading to S3. --no-encrypt Don't encrypt files. -f, --force Force overwrite and other dangerous operations. --continue Continue getting a partially downloaded file (only for [get] command). --continue-put Continue uploading partially uploaded files or multipart upload parts. Restarts/parts files that don't have matching size and md5. Skips files/parts that do. Note: md5sum checks are not always sufficient to check (part) file equality. Enable this at your own risk. --upload-id=UPLOAD_ID UploadId for Multipart Upload, in case you want continue an existing upload (equivalent to --continue- put) and there are multiple partial uploads. Use s3cmd multipart [URI] to see what UploadIds are associated with the given URI. --skip-existing Skip over files that exist at the destination (only for [get] and [sync] commands). -r, --recursive Recursive upload, download or removal. --check-md5 Check MD5 sums when comparing files for [sync]. (default) --no-check-md5 Do not check MD5 sums when comparing files for [sync]. Only size will be compared. May significantly speed up transfer but may also miss some changed files. -P, --acl-public Store objects with ACL allowing read for anyone. --acl-private Store objects with default ACL allowing access for you only. --acl-grant=PERMISSION:EMAIL or USER_CANONICAL_ID Grant stated permission to a given amazon user. Permission is one of: read, write, read_acp, write_acp, full_control, all --acl-revoke=PERMISSION:USER_CANONICAL_ID Revoke stated permission for a given amazon user. Permission is one of: read, write, read_acp, wr ite_acp, full_control, all -D NUM, --restore-days=NUM Number of days to keep restored file available (only for 'restore' command). --delete-removed Delete remote objects with no corresponding local file [sync] --no-delete-removed Don't delete remote objects. --delete-after Perform deletes after new uploads [sync] --delay-updates *OBSOLETE* Put all updated files into place at end [sync] --max-delete=NUM Do not delete more than NUM files. [del] and [sync] --add-destination=ADDITIONAL_DESTINATIONS Additional destination for parallel uploads, in addition to last arg. May be repeated. --delete-after-fetch Delete remote objects after fetching to local file (only for [get] and [sync] commands). -p, --preserve Preserve filesystem attributes (mode, ownership, timestamps). Default for [sync] command. --no-preserve Don't store FS attributes --exclude=GLOB Filenames and paths matching GLOB will be excluded from sync --exclude-from=FILE Read --exclude GLOBs from FILE --rexclude=REGEXP Filenames and paths matching REGEXP (regular expression) will be excluded from sync --rexclude-from=FILE Read --rexclude REGEXPs from FILE --include=GLOB Filenames and paths matching GLOB will be included even if previously excluded by one of --(r)exclude(-from) patterns --include-from=FILE Read --include GLOBs from FILE --rinclude=REGEXP Same as --include but uses REGEXP (regular expression) instead of GLOB --rinclude-from=FILE Read --rinclude REGEXPs from FILE --files-from=FILE Read list of source-file names from FILE. Use - to read from stdin. --region=REGION, --bucket-location=REGION Region to create bucket in. As of now the regions are: us-east-1, us-west-1, us-west-2, eu-west-1, eu- central-1, ap-northeast-1, ap-southeast-1, ap- southeast-2, sa-east-1 --host=HOSTNAME HOSTNAME:PORT for S3 endpoint (default: s3.amazonaws.com, alternatives such as s3-eu- west-1.amazonaws.com). You should also set --host- bucket. --host-bucket=HOST_BUCKET DNS-style bucket+hostname:port template for accessing a bucket (default: %(bucket)s.s3.amazonaws.com) --reduced-redundancy, --rr Store object with 'Reduced redundancy'. Lower per-GB price. [put, cp, mv] --no-reduced-redundancy, --no-rr Store object without 'Reduced redundancy'. Higher per- GB price. [put, cp, mv] --storage-class=CLASS Store object with specified CLASS (STANDARD, STANDARD_IA, or REDUCED_REDUNDANCY). Lower per-GB price. [put, cp, mv] --access-logging-target-prefix=LOG_TARGET_PREFIX Target prefix for access logs (S3 URI) (for [cfmodify] and [accesslog] commands) --no-access-logging Disable access logging (for [cfmodify] and [accesslog] commands) --default-mime-type=DEFAULT_MIME_TYPE Default MIME-type for stored objects. Application default is binary/octet-stream. -M, --guess-mime-type Guess MIME-type of files by their extension or mime magic. Fall back to default MIME-Type as specified by --default-mime-type option --no-guess-mime-type Don't guess MIME-type and use the default type instead. --no-mime-magic Don't use mime magic when guessing MIME-type. -m MIME/TYPE, --mime-type=MIME/TYPE Force MIME-type. Override both --default-mime-type and --guess-mime-type. --add-header=NAME:VALUE Add a given HTTP header to the upload request. Can be used multiple times. For instance set 'Expires' or 'Cache-Control' headers (or both) using this option. --remove-header=NAME Remove a given HTTP header. Can be used multiple times. For instance, remove 'Expires' or 'Cache- Control' headers (or both) using this option. [modify] --server-side-encryption Specifies that server-side encryption will be used when putting objects. [put, sync, cp, modify] --server-side-encryption-kms-id=KMS_KEY Specifies the key id used for server-side encryption with AWS KMS-Managed Keys (SSE-KMS) when putting objects. [put, sync, cp, modify] --encoding=ENCODING Override autodetected terminal and filesystem encoding (character set). Autodetected: UTF-8 --add-encoding-exts=EXTENSIONs Add encoding to these comma delimited extensions i.e. (css,js,html) when uploading to S3 ) --verbatim Use the S3 name as given on the command line. No pre- processing, encoding, etc. Use with caution! --disable-multipart Disable multipart upload on files bigger than --multipart-chunk-size-mb --multipart-chunk-size-mb=SIZE Size of each chunk of a multipart upload. Files bigger than SIZE are automatically uploaded as multithreaded- multipart, smaller files are uploaded using the traditional method. SIZE is in Mega-Bytes, default chunk size is 15MB, minimum allowed chunk size is 5MB, maximum is 5GB. --list-md5 Include MD5 sums in bucket listings (only for 'ls' command). -H, --human-readable-sizes Print sizes in human readable form (eg 1kB instead of 1234). --ws-index=WEBSITE_INDEX Name of index-document (only for [ws-create] command) --ws-error=WEBSITE_ERROR Name of error-document (only for [ws-create] command) --expiry-date=EXPIRY_DATE Indicates when the expiration rule takes effect. (only for [expire] command) --expiry-days=EXPIRY_DAYS Indicates the number of days after object creation the expiration rule takes effect. (only for [expire] command) --expiry-prefix=EXPIRY_PREFIX Identifying one or more objects with the prefix to which the expiration rule applies. (only for [expire] command) --progress Display progress meter (default on TTY). --no-progress Don't display progress meter (default on non-TTY). --stats Give some file-transfer stats. --enable Enable given CloudFront distribution (only for [cfmodify] command) --disable Enable given CloudFront distribution (only for [cfmodify] command) --cf-invalidate Invalidate the uploaded filed in CloudFront. Also see [cfinval] command. --cf-invalidate-default-index When using Custom Origin and S3 static website, invalidate the default index file. --cf-no-invalidate-default-index-root When using Custom Origin and S3 static website, don't invalidate the path to the default index file. --cf-add-cname=CNAME Add given CNAME to a CloudFront distribution (only for [cfcreate] and [cfmodify] commands) --cf-remove-cname=CNAME Remove given CNAME from a CloudFront distribution (only for [cfmodify] command) --cf-comment=COMMENT Set COMMENT for a given CloudFront distribution (only for [cfcreate] and [cfmodify] commands) --cf-default-root-object=DEFAULT_ROOT_OBJECT Set the default root object to return when no object is specified in the URL. Use a relative path, i.e. default/index.html instead of /default/index.html or s3://bucket/default/index.html (only for [cfcreate] and [cfmodify] commands) -v, --verbose Enable verbose output. -d, --debug Enable debug output. --version Show s3cmd version (1.6.1) and exit. -F, --follow-symlinks Follow symbolic links as if they are regular files --cache-file=FILE Cache FILE containing local source MD5 values -q, --quiet Silence output on stdout --ca-certs=CA_CERTS_FILE Path to SSL CA certificate FILE (instead of system default) --check-certificate Check SSL certificate validity --no-check-certificate Do not check SSL certificate validity --check-hostname Check SSL certificate hostname validity --no-check-hostname Do not check SSL certificate hostname validity --signature-v2 Use AWS Signature version 2 instead of newer signature methods. Helpful for S3-like systems that don't have AWS Signature v4 yet. --limit-rate=LIMITRATE Limit the upload or download speed to amount bytes per second. Amount may be expressed in bytes, kilobytes with the k suffix, or megabytes with the m suffix --requester-pays Set the REQUESTER PAYS flag for operations -l, --long-listing Produce long listing [ls] --stop-on-error stop if error in transfer --content-disposition=CONTENT_DISPOSITION Provide a Content-Disposition for signed URLs, e.g., "inline; filename=myvideo.mp4" --content-type=CONTENT_TYPE Provide a Content-Type for signed URLs, e.g., "video/mp4" Commands: Make bucket s3cmd mb s3://BUCKET Remove bucket s3cmd rb s3://BUCKET List objects or buckets s3cmd ls [s3://BUCKET[/PREFIX]] List all object in all buckets s3cmd la Put file into bucket s3cmd put FILE [FILE...] s3://BUCKET[/PREFIX] Get file from bucket s3cmd get s3://BUCKET/OBJECT LOCAL_FILE Delete file from bucket s3cmd del s3://BUCKET/OBJECT Delete file from bucket (alias for del) s3cmd rm s3://BUCKET/OBJECT Restore file from Glacier storage s3cmd restore s3://BUCKET/OBJECT Synchronize a directory tree to S3 (checks files freshness using size and md5 checksum, unless overridden by options, see below) s3cmd sync LOCAL_DIR s3://BUCKET[/PREFIX] or s3://BUCKET[/PREFIX] LOCAL_DIR Disk usage by buckets s3cmd du [s3://BUCKET[/PREFIX]] Get various information about Buckets or Files s3cmd info s3://BUCKET[/OBJECT] Copy object s3cmd cp s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2] Modify object metadata s3cmd modify s3://BUCKET1/OBJECT Move object s3cmd mv s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2] Modify Access control list for Bucket or Files s3cmd setacl s3://BUCKET[/OBJECT] Modify Bucket Policy s3cmd setpolicy FILE s3://BUCKET Delete Bucket Policy s3cmd delpolicy s3://BUCKET Modify Bucket CORS s3cmd setcors FILE s3://BUCKET Delete Bucket CORS s3cmd delcors s3://BUCKET Modify Bucket Requester Pays policy s3cmd payer s3://BUCKET Show multipart uploads s3cmd multipart s3://BUCKET [Id] Abort a multipart upload s3cmd abortmp s3://BUCKET/OBJECT Id List parts of a multipart upload s3cmd listmp s3://BUCKET/OBJECT Id Enable/disable bucket access logging s3cmd accesslog s3://BUCKET Sign arbitrary string using the secret key s3cmd sign STRING-TO-SIGN Sign an S3 URL to provide limited public access with expiry s3cmd signurl s3://BUCKET/OBJECT <expiry_epoch|+expiry_offset> Fix invalid file names in a bucket s3cmd fixbucket s3://BUCKET[/PREFIX] Create Website from bucket s3cmd ws-create s3://BUCKET Delete Website s3cmd ws-delete s3://BUCKET Info about Website s3cmd ws-info s3://BUCKET Set or delete expiration rule for the bucket s3cmd expire s3://BUCKET Upload a lifecycle policy for the bucket s3cmd setlifecycle FILE s3://BUCKET Remove a lifecycle policy for the bucket s3cmd dellifecycle s3://BUCKET List CloudFront distribution points s3cmd cflist Display CloudFront distribution point parameters s3cmd cfinfo [cf://DIST_ID] Create CloudFront distribution point s3cmd cfcreate s3://BUCKET Delete CloudFront distribution point s3cmd cfdelete cf://DIST_ID Change CloudFront distribution point parameters s3cmd cfmodify cf://DIST_ID Display CloudFront invalidation request(s) status s3cmd cfinvalinfo cf://DIST_ID[/INVAL_ID] For more information, updates and news, visit the s3cmd website: http://s3tools.org