2.08

pdfjam is a shell-script front end to the LaTeX 'pdfpages' package (for which, see http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages). Usage: pdfjam [OPTIONS] [--] [FILE1 [SEL1]] [FILE2 [SEL2]]... where * 'FILE1' etc. are PDF files (JPG and PNG files are also allowed). For input from /dev/stdin, use the special name '/dev/stdin' in place of any of FILE1, FILE2, etc: this can be mixed with 'real' files as needed, to allow input through a pipe (note that if /dev/stdin is connected to tty, an error results). If 'FILE1' is absent, pdfjam will use '/dev/stdin' (and will use '-' for the page selection -- see next item). * 'SEL1' is a page selection for FILE1, etc. To select all pages (the default) use '-'. See the pdfpages manual for more details. An example: ... file1 '{},2,4-5,9-' ... makes an empty page, followed by pages 2,4,5,6 of file1, followed by pages 9 onwards (up to the end of file1). A page selection can be applied to more than one file, e.g., ... file1 file2 file3 1-7 ... applies page selection '1-7' to all three files; but for example ... file1 file2 2- file3 1-7 ... would apply the page selection '2-' to file1 and file2, and '1-7' to file3. A page selection applies to all the files *immediately* preceding it in the argument list. A missing page selection defaults to '-'; this includes the case where 'FILE1' is absent and so /dev/stdin gets used by default. * 'options' are pdfpages specifications in the form '--KEY VALUE' (see below), or --help (or -h, or -u) Output this text only; no processing of PDF files. --configpath Output the 'configpath' variable and exit immediately; no processing of PDF files. --version (or -V) Output the version number of pdfjam and exit immediately; no processing of PDF files. --quiet (or -q) Suppress verbose commentary on progress. --batch Run pdfjam sequentially on each input file in turn, and produce a separate output file for each input, rather than the default behaviour (which is a single run of pdfjam on all of the input files, producing a single output document). For the location of output files, see '--outfile'. The --batch option cannot be used in the case of input fron stdin. --outfile PATH (or -o PATH) Specifies where the output file(s) will go. If PATH is an existing directory, pdfjam will attempt to write its output PDF file(s) there, with name(s) derived from the input file name(s) and the --suffix option (see below). Otherwise the output file will be PATH. If '/dev/stdin' is the only or last input file, PATH cannot be a directory. Your current default PATH for output is: /tmp/sandpit --suffix STRING Specifies a suffix for output file names, to be used when --outfile is either (a) a directory, or (b) not specified in a --batch call. A good STRING should be descriptive: for example, --suffix 'rotated' would append the text '-rotated' to the name of the input file in order to make the output file name, as in 'myfile-rotated.pdf'. The STRING must not have zero length. [Default for you at this site: suffix=pdfjam] --checkfiles --no-checkfiles If the Unix 'file' utility is available, with options -L and -b, the output of 'file -Lb FILE1' should be 'PDF document...' where '...' gives version information. If this is the case on your system you should use '--checkfiles'; otherwise use '--no-checkfiles', in which case all input PDF files must have .pdf or .PDF as their name extension. [Default for you at this site: checkfiles=false] --preamble STRING Append the supplied STRING to the preamble of the LaTeX source file(s), immediately before the '\begin{document}' line. An example: pdfjam --nup 2x2 myfile.pdf -o myfile-4up.pdf \ --preamble '\usepackage{fancyhdr} \pagestyle{fancy}' The '--preamble' option can be used, for example, to load LaTeX packages and/or to set global options. If '--preamble' is used more than once in the call, the supplied preamble strings are simply concatenated. --keepinfo --no-keepinfo Preserve (or not) Title, Author, Subject and Keywords (from the last input PDF file, if more than one) in the output PDF file. This requires the pdfinfo utility, from the xpdf package, and the LaTeX 'hyperref' package; if either of those is not available, '--keepinfo' is ignored. [Default for you at this site: keepinfo=false] --pdftitle STRING --pdfauthor STRING --pdfsubject STRING --pdfkeywords STRING Provide text for the Title, Author, Subject and Keywords in the output PDF file. Requires the LaTeX 'hyperref' package. These options, individually, over-ride --keepinfo. --landscape --no-landscape Specify landscape page orientation (or not) in the output PDF file. [Default for you at this site: landscape=] --twoside --no-twoside Specify (or not) the 'twoside' document class option. [Default for you at this site: twoside=] --paper PAPERSPEC (or simply --PAPERSPEC) Specify a LaTeX paper size, for example '--paper a4paper' or simply '--a4paper' for ISO A4 paper. If the LaTeX 'geometry' package is installed, a wider range of paper sizes is available. For details see documentation for LaTeX and/or the 'geometry' package. [Default for you at this site: paper=a4paper] --papersize '{WIDTH,HEIGHT}' Specify a custom paper size, e.g., --papersize '{10in,18cm}' (Note the braces, and the comma!) If the 'geometry' package is not found, this has no effect. --pagecolor RGBSPEC Specify a background colour for the output pages. The RGBSPEC must be a comma-separated trio of integers between 0 and 255. An example: --pagecolor 150,200,150 [Default is no background colour] --tidy --no-tidy Specify whether the temporary directory created by pdfjam should be deleted. Use '--no-tidy' to help debug most errors. [Default for you at this site: tidy=true] --vanilla Suppress the reading of any site-wide or user-specific configuration files. --KEY VALUE Specify options to '\includepdfmerge', in the LaTeX 'pdfpages' package. Here KEY is the name of any of the many options for '\includepdfmerge', and VALUE is a corresponding value. Examples are --nup 2x1 (for 2-up side-by-side imposition) --scale 0.7 (to scale all input pages to 70% size) --offset '1cm 0.5cm' (to offset all pages -- note the quotes!) --frame true (to put a frame round each input page) --trim '1cm 2cm 1cm 2cm' --clip true (to trim those amounts from left, bottom, right and top, respectively, of input pages) etc., etc. For more information see the manual for the 'pdfpages' package, at http://www.ctan.org/tex-archive/macros/latex/contrib/pdfpages * '--' can be used to signal that there are no more options to come. Defaults for the options '--suffix', '--keepinfo', '--paper', '--outfile', '--landscape', '--twoside', '--tidy', '--checkfiles' and '--preamble' can be set in site-wide or user-specific configuration files. The path that is searched for site-wide configuration files (named pdfjam.conf) at this installation is /etc:/usr/share/etc:/usr/local/share:/usr/local/etc This configuration path can be changed by editing the pdfjam script if necessary. Any user-specific configuration should be put in a file named .pdfjam.conf in your home directory. (All of these files are ignored if the '--vanilla' argument is used.) For more information, including an example configuration file, see http://go.warwick.ac.uk/pdfjam.