NVTV version 0.4.7 Usage: nvtv [-options ...] where options include: -h --help print this message --display hst:scrn X server to contact -m --tv-off TV off, switch to monitor -t --tv-on TV on -b --tv-bars Color bars -p --print calculate and print register values -F --fetch fetch current mode (use only for printing) -l --list list available modes on stdout -r --resolution x,y Resolution -o --overscan x,y Overscan percentage (as float) -s --size <size> Size (for predefined modes) -S --system NTSC,NTSC-J,PAL,PAL-60,PAL-NC,PAL-M,PAL-M60,PAL-X,SECAM -C --connector AUTO,COMPOSITE,SVIDEO,BOTH,CONVERT -T --chip BROOKTREE,CONEXANT,NVIDIA,CHRONTEL1,CHRONTEL2, PHILIPS1,PHILIPS2,NVIDIA or <bus>:<addr> -A --card-addr <addr> video card pci address as <bus>:<slot>.<func> -W --win-id id select window by numerical id -w --win-name name select window by name -c --center center selected window -X --switch-mode switch X mode -1 use first head -2 use second head (if available) -q --query query status of display (monitor, TV, flatpanel) -P --probe probe and print system information -N --nvdev enable usage of /dev/nv* devices -g --gui always use gui -n --no-root (only for debugging) -d --debug (only for debugging) --set name:val Specify setting The following settings are available: Contrast (-100 to 100) Saturation (-100 to 100) Brightness# ( -50 to 50) Contrast# ( -50 to 50) Saturation# ( -50 to 50) Phase ( -60 to 60) Hue ( -60 to 60) Flicker ( 0 to 100) AdaptFlicker ( 0 to 100) LumaBandwidth ( 0 to 100) ChromaBandwidth ( 0 to 100) Sharpness ( 0 to 100) CrossColor ( 0 to 100) Dualview (flag) Monochrome (flag) Non-Interlaced (flag) Macrovision (flag) FreeCarrier (flag) Colorfix (flag) AdjustCursor (flag) ViewportCursor (flag) ViewportMonitor (flag)

NVTV version 0.4.7 Usage: nvtv [-options ...] where options include: -h --help print this message --display hst:scrn X server to contact -m --tv-off TV off, switch to monitor -t --tv-on TV on -b --tv-bars Color bars -p --print calculate and print register values -F --fetch fetch current mode (use only for printing) -l --list list available modes on stdout -r --resolution x,y Resolution -o --overscan x,y Overscan percentage (as float) -s --size <size> Size (for predefined modes) -S --system NTSC,NTSC-J,PAL,PAL-60,PAL-NC,PAL-M,PAL-M60,PAL-X,SECAM -C --connector AUTO,COMPOSITE,SVIDEO,BOTH,CONVERT -T --chip BROOKTREE,CONEXANT,NVIDIA,CHRONTEL1,CHRONTEL2, PHILIPS1,PHILIPS2,NVIDIA or <bus>:<addr> -A --card-addr <addr> video card pci address as <bus>:<slot>.<func> -W --win-id id select window by numerical id -w --win-name name select window by name -c --center center selected window -X --switch-mode switch X mode -1 use first head -2 use second head (if available) -q --query query status of display (monitor, TV, flatpanel) -P --probe probe and print system information -N --nvdev enable usage of /dev/nv* devices -g --gui always use gui -n --no-root (only for debugging) -d --debug (only for debugging) --set name:val Specify setting The following settings are available: Contrast (-100 to 100) Saturation (-100 to 100) Brightness# ( -50 to 50) Contrast# ( -50 to 50) Saturation# ( -50 to 50) Phase ( -60 to 60) Hue ( -60 to 60) Flicker ( 0 to 100) AdaptFlicker ( 0 to 100) LumaBandwidth ( 0 to 100) ChromaBandwidth ( 0 to 100) Sharpness ( 0 to 100) CrossColor ( 0 to 100) Dualview (flag) Monochrome (flag) Non-Interlaced (flag) Macrovision (flag) FreeCarrier (flag) Colorfix (flag) AdjustCursor (flag) ViewportCursor (flag) ViewportMonitor (flag)