ipmievd version 1.8.18

ipmievd version 1.8.18 usage: ipmievd [options...] <command> -h This help -V Show version information -v Verbose (can use multiple times) -c Display output in comma separated format -d N Specify a /dev/ipmiN device to use (default=0) -I intf Interface to use -H hostname Remote host name for LAN interface -p port Remote RMCP port [default=623] -U username Remote session username -f file Read remote session password from file -z size Change Size of Communication Channel (OEM) -S sdr Use local file for remote SDR cache -D tty:b[:s] Specify the serial device, baud rate to use and, optionally, specify that interface is the system one -4 Use only IPv4 -6 Use only IPv6 -a Prompt for remote password -Y Prompt for the Kg key for IPMIv2 authentication -e char Set SOL escape character -C ciphersuite Cipher suite to be used by lanplus interface -k key Use Kg key for IPMIv2 authentication -y hex_key Use hexadecimal-encoded Kg key for IPMIv2 authentication -L level Remote session privilege level [default=ADMINISTRATOR] Append a '+' to use name/privilege lookup in RAKP1 -A authtype Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM -P password Remote session password -E Read password from IPMI_PASSWORD environment variable -K Read kgkey from IPMI_KGKEY environment variable -m address Set local IPMB address -b channel Set destination channel for bridged request -t address Bridge request to remote target address -B channel Set transit channel for bridged request (dual bridge) -T address Set transit address for bridge request (dual bridge) -l lun Set destination lun for raw commands -o oemtype Setup for OEM (use 'list' to see available OEM types) -O seloem Use file for OEM SEL event descriptions -N seconds Specify timeout for lan [default=2] / lanplus [default=1] interface -R retry Set the number of retries for lan/lanplus interface [default=4] Interfaces: open Linux OpenIPMI Interface [default] imb Intel IMB Interface lan IPMI v1.5 LAN Interface lanplus IPMI v2.0 RMCP+ LAN Interface free FreeIPMI IPMI Interface serial-terminal Serial Interface, Terminal Mode serial-basic Serial Interface, Basic Mode dummy Linux DummyIPMI Interface usb IPMI USB Interface(OEM Interface for AMI Devices) Commands: open Use OpenIPMI for asynchronous notification of events sel Poll SEL for notification of events