illumread -V (return code: 1)
Measure an illuminant, Version 1.8.3
Author: Graeme W. Gill, licensed under the AGPL Version 3
usage: illumread [-options] output.sp
-v Verbose mode
-S Plot spectrum for each reading
-c listno Choose instrument from the following list (default 1)
1 = '/dev/ttyS0'
2 = '/dev/ttyS1'
3 = '/dev/ttyS10'
4 = '/dev/ttyS11'
5 = '/dev/ttyS12'
6 = '/dev/ttyS13'
7 = '/dev/ttyS14'
8 = '/dev/ttyS15'
9 = '/dev/ttyS16'
10 = '/dev/ttyS17'
11 = '/dev/ttyS18'
12 = '/dev/ttyS19'
13 = '/dev/ttyS2'
14 = '/dev/ttyS20'
15 = '/dev/ttyS21'
16 = '/dev/ttyS22'
17 = '/dev/ttyS23'
18 = '/dev/ttyS24'
19 = '/dev/ttyS25'
20 = '/dev/ttyS26'
21 = '/dev/ttyS27'
22 = '/dev/ttyS28'
23 = '/dev/ttyS29'
24 = '/dev/ttyS3'
25 = '/dev/ttyS30'
26 = '/dev/ttyS31'
27 = '/dev/ttyS4'
28 = '/dev/ttyS5'
29 = '/dev/ttyS6'
30 = '/dev/ttyS7'
31 = '/dev/ttyS8'
32 = '/dev/ttyS9'
-N Disable initial calibration of instrument if possible
-H Use high resolution spectrum mode (if available)
-Y r Set refresh measurement mode
-Y R:rate Override measured refresh rate with rate Hz
-W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff
-T Test mode - restore & save measurements to
*_i.sp, *_r.sp, *_p.sp, *_mpir.sp, *_cpir.sp files
-D [level] Print debug diagnostics to stderr
illuminant.sp File to save measurement to
illumread -HELP (return code: 1)
Measure an illuminant, Version 1.8.3
Author: Graeme W. Gill, licensed under the AGPL Version 3
usage: illumread [-options] output.sp
-v Verbose mode
-S Plot spectrum for each reading
-c listno Choose instrument from the following list (default 1)
1 = '/dev/ttyS0'
2 = '/dev/ttyS1'
3 = '/dev/ttyS10'
4 = '/dev/ttyS11'
5 = '/dev/ttyS12'
6 = '/dev/ttyS13'
7 = '/dev/ttyS14'
8 = '/dev/ttyS15'
9 = '/dev/ttyS16'
10 = '/dev/ttyS17'
11 = '/dev/ttyS18'
12 = '/dev/ttyS19'
13 = '/dev/ttyS2'
14 = '/dev/ttyS20'
15 = '/dev/ttyS21'
16 = '/dev/ttyS22'
17 = '/dev/ttyS23'
18 = '/dev/ttyS24'
19 = '/dev/ttyS25'
20 = '/dev/ttyS26'
21 = '/dev/ttyS27'
22 = '/dev/ttyS28'
23 = '/dev/ttyS29'
24 = '/dev/ttyS3'
25 = '/dev/ttyS30'
26 = '/dev/ttyS31'
27 = '/dev/ttyS4'
28 = '/dev/ttyS5'
29 = '/dev/ttyS6'
30 = '/dev/ttyS7'
31 = '/dev/ttyS8'
32 = '/dev/ttyS9'
-N Disable initial calibration of instrument if possible
-H Use high resolution spectrum mode (if available)
-Y r Set refresh measurement mode
-Y R:rate Override measured refresh rate with rate Hz
-W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff
-T Test mode - restore & save measurements to
*_i.sp, *_r.sp, *_p.sp, *_mpir.sp, *_cpir.sp files
-D [level] Print debug diagnostics to stderr
illuminant.sp File to save measurement to