icedax 1.1.11

usage: icedax [OPTIONS ...] [trackfilenames ...] OPTIONS: [-c chans] [-s] [-m] [-b bits] [-r rate] [-a divider] [-S speed] [-x] [-t track[+endtrack]] [-i index] [-o offset] [-d duration] [-F] [-G] [-q] [-w] [-v vopts] [-R] [-P overlap] [-B] [-T] [-C input-endianess] [-e] [-n sectors] [-N] [-J] [-L cddbp-mode] [-H] [-g] [-l buffers] [-D cd-device] [-I interface] [-K sound-device] [-O audiotype] [-E output-endianess] [-A auxdevice] [-paranoia] [-cddbp-server=name] [-cddbp-port=port] [-version] (-D) dev=device set the cdrom or scsi device (as Bus,Id,Lun). (-A) auxdevice=device set the aux device (typically /dev/cdrom). (-K) sound-device=device set the sound device to use for -e (typically /dev/dsp). (-I) interface=interface specify the interface for cdrom access. (generic_scsi or cooked_ioctl). (-c) channels=channels set 1 for mono, 2 or s for stereo (s: channels swapped). (-s) -stereo select stereo recording. (-m) -mono select mono recording. (-x) -max select maximum quality (stereo/16-bit/44.1 KHz). (-b) bits=bits set bits per sample per channel (8, 12 or 16 bits). (-r) rate=rate set rate in samples per second. -R gives all rates (-a) divider=divider set rate to 44100Hz / divider. -R gives all rates (-R) -dump-rates dump a table with all available sample rates (-S) speed=speedfactor set the cdrom drive to a given speed during reading (-P) set-overlap=sectors set amount of overlap sampling (default is 0) (-n) sectors-per-request=secs read 'sectors' sectors per request. (-l) buffers-in-ring=buffers use a ring buffer with 'buffers' elements. (-t) track=track[+end track] select start track (option. end track). (-i) index=index select start index. (-o) offset=offset start at 'offset' sectors behind start track/index. one sector equivalents 1/75 second. (-O) output-format=audiotype set to wav, au (sun), cdr (raw), aiff or aifc format. (-C) cdrom-endianess=endian set little, big or guess input sample endianess. (-E) output-endianess=endian set little or big output sample endianess. (-d) duration=seconds set recording time in seconds or 0 for whole track. (-w) -wait wait for audio signal, then start recording. (-F) -find-extremes find extrem amplitudes in samples. (-G) -find-mono find if input samples are mono. (-T) -deemphasize undo pre-emphasis in input samples. (-e) -echo echo audio data to sound device (see -K) SOUND_DEV. (-v) verbose-level=optlist controls verbosity (for a list use -vhelp). (-N) -no-write do not create audio sample files. (-J) -info-only give disc information only. (-L) cddb=cddbpmode do cddbp title lookups. resolve multiple entries according to cddbpmode: 0=interactive, 1=first entry (-H) -no-infofile no info file generation. (-g) -gui generate special output suitable for gui frontends. (-Q) -silent-scsi do not print status of erreneous scsi-commands. -scanbus scan the SCSI bus and exit --devices scan for system devices and print with native names (-M) md5=count calculate MD-5 checksum for blocks of 'count' bytes. (-q) -quiet quiet operation, no screen output. (-p) playback-realtime=perc play (echo) audio pitched at perc percent (50%-200%). (-V) -verbose-scsi each option increases verbosity for SCSI commands. (-h) -help show this help screen. (-B) -alltracks, -bulk record each track into a seperate file. -paranoia use the lib paranoia for reading. -paraopts=opts set options for lib paranoia (see -paraopts=help). -cddbp-server=servername set the cddbp server to use for title lookups. -cddbp-port=portnumber set the cddbp port to use for title lookups. -version print version information. Please note: some short options will be phased out soon (disappear)! parameters: (optional) one or more file names or - for standard output. Version 1.1.11 defaults stereo, 16 bit, 44100.00 Hz, track 1, no offset, one track, type wav 'audio', don't wait for signal, not quiet, use generic_scsi, device /dev/cdrom, aux /dev/cdrom