hp-scan -V (return code: 1)
[01mHP Linux Imaging and Printing System (ver. 3.16.3)[0m
[01mScan Utility ver. 2.2[0m
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
SANE-based scan utility for HPLIP supported all-in-one/mfp devices.
[01mUsage: hp-scan [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS][0m
[01m[PRINTER|DEVICE-URI][0m
To specify a -d<device-uri> or --device=<device-uri>
device-URI:
To specify a CUPS -p<printer> or --printer=<printer>
printer:
[01m[MODE][0m
Run in interactive -i or --interactive
mode:
[01m[OPTIONS][0m
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[01m[OPTIONS] (General)[0m
Scan destinations: -s<dest_list> or --dest=<dest_list>
where <dest_list> is a comma separated list containing
one or more of: 'file'*,
'viewer', 'editor', 'pdf', or 'print'. Use only commas
between values, no spaces.
Scan mode: -m<mode> or --mode=<mode>. Where <mode> is 'gray'*,
'color' or 'lineart'.
Scanning -r<resolution_in_dpi> or --res=<resolution_in_dpi> or
resolution: --resolution=<resolution_in_dpi>
where 300 is default.
Image resize: --resize=<scale_in_%> (min=1%, max=400%, default=100%)
Image contrast: -c=<contrast> or --contrast=<contrast>
The contrast range varies from device to device.
Image brightness: -b=<brightness> or --brightness=<brightness>
The brightness range varies from device to device.
ADF mode: --adf (Note, only PDF output is supported when using
the ADF)
--duplex or --dup for duplex scanning using ADF.
[01m[OPTIONS] (Scan area)[0m
Specify the units -t<units> or --units=<units>
for area/box
measurements:
where <units> is 'mm'*, 'cm', 'in', 'px', or 'pt'
('mm' is default).
Scan area: -a<tlx>,<tly>,<brx>,<bry> or
--area=<tlx>,<tly>,<brx>,<bry>
Coordinates are relative to the upper left corner of
the scan area.
Units for tlx, tly, brx, and bry are specified by
-t/--units (default is 'mm').
Use only commas between values, no spaces.
Scan box: --box=<tlx>,<tly>,<width>,<height>
tlx and tly coordinates are relative to the upper left
corner of the scan area.
Units for tlx, tly, width, and height are specified by
-t/--units (default is 'mm').
Use only commas between values, no spaces.
Top left x of the --tlx=<tlx>
scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Top left y of the --tly=<tly>
scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Bottom right x of --brx=<brx>
the scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Bottom right y of --bry=<bry>
the scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Specify the scan --size=<paper size name>
area based on a
paper size:
where <paper size name> is one of: 3x5, 4x6, 5x7,
a2_env, a3, a4, a5, a6, b4, b5, c6_env, dl_env, exec,
flsa, higaki, japan_env_3, japan_env_4, legal, letter,
no_10_env, oufufu-hagaki, photo, super_b
[01m[OPTIONS] ('file' dest)[0m
Filename for -o<file> or -f<file> or --file=<file> or
'file' --output=<file>
destination:
[01m[OPTIONS] ('pdf' dest)[0m
PDF viewer --pdf=<pdf_viewer>
application:
[01m[OPTIONS] ('viewer' dest)[0m
Image viewer -v<viewer> or --viewer=<viewer>
application:
[01m[OPTIONS] ('editor' dest)[0m
Image editor -e<editor> or --editor=<editor>
application:
[01m[OPTIONS] ('email' dest)[0m
From: address for --email-from=<email_from_address> (required for
'email' dest: 'email' dest.)
To: address for --email-to=<email__to_address> (required for 'email'
'email' dest: dest.)
Email subject for --email-subject="<subject>" or --subject="<subject>"
'email' dest:
Use double quotes (") around the subject if it
contains space characters.
Note or message --email-msg="<msg>" or --email-note="<note>"
for the 'email'
dest:
Use double quotes (") around the note/message if it
contains space characters.
[01m[OPTIONS] ('printer' dest)[0m
Printer --dp=<printer_name> or --dest-printer=<printer_name>
queue/printer
dest:
Printer device-URI --dd=<device-uri> or --dest-device=<device-uri>
dest:
[01m[OPTIONS] (advanced)[0m
Set the scanner -x<mode> or --compression=<mode>, <mode>='raw', 'none'
compression mode: or 'jpeg' ('jpeg' is default) ('raw' and 'none' are
equivalent)
[01mSee Also:[0m
hp-scan --help (return code: 0)
[01mHP Linux Imaging and Printing System (ver. 3.16.3)[0m
[01mScan Utility ver. 2.2[0m
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
SANE-based scan utility for HPLIP supported all-in-one/mfp devices.
[01mUsage: hp-scan [DEVICE_URI|PRINTER_NAME] [MODE] [OPTIONS][0m
[01m[PRINTER|DEVICE-URI][0m
To specify a -d<device-uri> or --device=<device-uri>
device-URI:
To specify a CUPS -p<printer> or --printer=<printer>
printer:
[01m[MODE][0m
Run in interactive -i or --interactive
mode:
[01m[OPTIONS][0m
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[01m[OPTIONS] (General)[0m
Scan destinations: -s<dest_list> or --dest=<dest_list>
where <dest_list> is a comma separated list containing
one or more of: 'file'*,
'viewer', 'editor', 'pdf', or 'print'. Use only commas
between values, no spaces.
Scan mode: -m<mode> or --mode=<mode>. Where <mode> is 'gray'*,
'color' or 'lineart'.
Scanning -r<resolution_in_dpi> or --res=<resolution_in_dpi> or
resolution: --resolution=<resolution_in_dpi>
where 300 is default.
Image resize: --resize=<scale_in_%> (min=1%, max=400%, default=100%)
Image contrast: -c=<contrast> or --contrast=<contrast>
The contrast range varies from device to device.
Image brightness: -b=<brightness> or --brightness=<brightness>
The brightness range varies from device to device.
ADF mode: --adf (Note, only PDF output is supported when using
the ADF)
--duplex or --dup for duplex scanning using ADF.
[01m[OPTIONS] (Scan area)[0m
Specify the units -t<units> or --units=<units>
for area/box
measurements:
where <units> is 'mm'*, 'cm', 'in', 'px', or 'pt'
('mm' is default).
Scan area: -a<tlx>,<tly>,<brx>,<bry> or
--area=<tlx>,<tly>,<brx>,<bry>
Coordinates are relative to the upper left corner of
the scan area.
Units for tlx, tly, brx, and bry are specified by
-t/--units (default is 'mm').
Use only commas between values, no spaces.
Scan box: --box=<tlx>,<tly>,<width>,<height>
tlx and tly coordinates are relative to the upper left
corner of the scan area.
Units for tlx, tly, width, and height are specified by
-t/--units (default is 'mm').
Use only commas between values, no spaces.
Top left x of the --tlx=<tlx>
scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Top left y of the --tly=<tly>
scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Bottom right x of --brx=<brx>
the scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Bottom right y of --bry=<bry>
the scan area:
Coordinates are relative to the upper left corner of
the scan area.
Units are specified by -t/--units (default is 'mm').
Specify the scan --size=<paper size name>
area based on a
paper size:
where <paper size name> is one of: 3x5, 4x6, 5x7,
a2_env, a3, a4, a5, a6, b4, b5, c6_env, dl_env, exec,
flsa, higaki, japan_env_3, japan_env_4, legal, letter,
no_10_env, oufufu-hagaki, photo, super_b
[01m[OPTIONS] ('file' dest)[0m
Filename for -o<file> or -f<file> or --file=<file> or
'file' --output=<file>
destination:
[01m[OPTIONS] ('pdf' dest)[0m
PDF viewer --pdf=<pdf_viewer>
application:
[01m[OPTIONS] ('viewer' dest)[0m
Image viewer -v<viewer> or --viewer=<viewer>
application:
[01m[OPTIONS] ('editor' dest)[0m
Image editor -e<editor> or --editor=<editor>
application:
[01m[OPTIONS] ('email' dest)[0m
From: address for --email-from=<email_from_address> (required for
'email' dest: 'email' dest.)
To: address for --email-to=<email__to_address> (required for 'email'
'email' dest: dest.)
Email subject for --email-subject="<subject>" or --subject="<subject>"
'email' dest:
Use double quotes (") around the subject if it
contains space characters.
Note or message --email-msg="<msg>" or --email-note="<note>"
for the 'email'
dest:
Use double quotes (") around the note/message if it
contains space characters.
[01m[OPTIONS] ('printer' dest)[0m
Printer --dp=<printer_name> or --dest-printer=<printer_name>
queue/printer
dest:
Printer device-URI --dd=<device-uri> or --dest-device=<device-uri>
dest:
[01m[OPTIONS] (advanced)[0m
Set the scanner -x<mode> or --compression=<mode>, <mode>='raw', 'none'
compression mode: or 'jpeg' ('jpeg' is default) ('raw' and 'none' are
equivalent)
[01mSee Also:[0m